I realized that after I root for my N910c device can not activate more the reactivation lock.
Help.
gustavopaixao said:
I realized that after I root for my N910c device can not activate more the reactivation lock.
Help.
Click to expand...
Click to collapse
I'm not sure if you can activate Reactivation Lock AFTER installing a custom recovery and root or not. I do know that if you have Reactivation Lock activated (selected in security settings) during the ODIN of TWRP and flashing SuperSU that it will "lock you out" of recovery and root and you will essentially have a retail note 4.
jpcalhoun said:
I'm not sure if you can activate Reactivation Lock AFTER installing a custom recovery and root or not. I do know that if you have Reactivation Lock activated (selected in security settings) during the ODIN of TWRP and flashing SuperSU that it will "lock you out" of recovery and root and you will essentially have a retail note 4.
Click to expand...
Click to collapse
When I'm with the stock rom without root I can not turn the reactivation lock, but after not done more active root.
gustavopaixao said:
When I'm with the stock rom without root I can not turn the reactivation lock, but after not done more active root.
Click to expand...
Click to collapse
Hello gustavopaixao, could you restate or explain what you mean when you say "but after not done more active root"?
jpcalhoun said:
Hello gustavopaixao, could you restate or explain what you mean when you say "but after not done more active root"?
Click to expand...
Click to collapse
I'm brazilian too bro, like Gustavopaixao. I think that he used Google translate. The right sentence is " but after root, no more Reactivation lock".
I have the same problem with my note 4.
jgfernog said:
I'm brazilian too bro, like Gustavopaixao. I think that he used Google translate. The right sentence is " but after root, no more Reactivation lock".
I have the same problem with my note 4.
Click to expand...
Click to collapse
I don't know on the model you have (N910C). On the Verizon model of the Note 4 (N910V) you still have the option to select Reactivation Lock after installing TWRP and rooting, but I don't recommend you do that if you are going to flash ROMs. As I stated previously, users who had Reactivation Lock selected when they installed TWRP and then tried to reboot the phone would not boot. I hope this answer your questions.
jpcalhoun said:
...
Click to expand...
Click to collapse
Did you try enable it? I have the option here. I check the box and it request my password(my finger ), when I'm done, It still disabled
jgfernog said:
Did you try enable it? I have the option here. I check the box and it request my password(my finger ), when I'm done, It still disabled
Click to expand...
Click to collapse
Yes, I can still enable it after flashing TWRP and root, but I recommend it not be enabled.
jgfernog said:
Did you try enable it? I have the option here. I check the box and it request my password(my finger ), when I'm done, It still disabled
Click to expand...
Click to collapse
Same here on g925i (s6 edge) . Reactivation lock still disabled when I try to enable it;
ivrj said:
Same here on g925i (s6 edge) . Reactivation lock still disabled when I try to enable it;
Click to expand...
Click to collapse
Very old question hahahaha
You can use reactivation lock only with stock ROM. So, if u want this feature back, u need to install stock by Odin.
Related
Hey Dudes!
here is a new chapter regarding Samsung Stupid Reactivation Lock!
actually i'm doing experiment with Samsung Note 4 (Reactivation Locked)
Phone fully activated and samsung account disabled with ROOT
now can someone share the "mmcblk?" where store reactivation lock
and can we direct TURN OFF this stupid Reactivation Lock?
Thanks For Suggestions
need help
Hi,
Can you help me get my phone off the reactivation lock. I reset the phone through recovery and am not able to resetup the phone now.
moonmoon8 said:
Hey Dudes!
here is a new chapter regarding Samsung Stupid Reactivation Lock!
actually i'm doing experiment with Samsung Note 4 (Reactivation Locked)
Phone fully activated and samsung account disabled with ROOT
now can someone share the "mmcblk?" where store reactivation lock
and can we direct TURN OFF this stupid Reactivation Lock?
Thanks For Suggestions
Click to expand...
Click to collapse
justkarol said:
Hi,
Can you help me get my phone off the reactivation lock. I reset the phone through recovery and am not able to resetup the phone now.
Click to expand...
Click to collapse
Search youtube for rootjunky frp lock remove
Hello,
Does anyone know how to remove FRP from HTC 10?
Enable OEM Unlocking in Developer Settings. Click past the warning that FRP will be disabled. Boom, you're done.
I found this video. I did the same and problem solved!
https://youtu.be/ChCvMLdyRuw
CrashTestDroid said:
Enable OEM Unlocking in Developer Settings. Click past the warning that FRP will be disabled. Boom, you're done.
Click to expand...
Click to collapse
impossible to activate developper option...;With a popup messageevelopper option not avalaible for this user.
Nadjombe said:
impossible to activate developper option...;With a popup messageevelopper option not avalaible for this user.
Click to expand...
Click to collapse
Switch your active user then?
bngesc said:
Switch your active user then?
Click to expand...
Click to collapse
Please step by step to activate user!
only combination file solve the problem
So I flashed 3 ROMS from openkirin.net,
1. LOS
2. Carbon OS
3. RR Os
Everything is fine except the camera apps there. All three Roms have apps that just click normal pics whenever i switch to portrait mode (I must add they contain stock emui camera app) the apps just hangs.
Does anybody have a solution to this to take portrait mode photos on custom roms.
Or any camera ( can be third party ) that can allow me to do so.
Thanks in advance ?
MeChiku said:
So I flashed 3 ROMS from openkirin.net,
1. LOS
2. Carbon OS
3. RR Os
Everything is fine except the camera apps there. All three Roms have apps that just click normal pics whenever i switch to portrait mode (I must add they contain stock emui camera app) the apps just hangs.
Does anybody have a solution to this to take portrait mode photos on custom roms.
Or any camera ( can be third party ) that can allow me to do so.
Thanks in advance ?
Click to expand...
Click to collapse
Name any custom ROM. They're Camera are just bare bones. Having stock camera port is great actually. We can't really complain about camera since we don't have Gcam mod available for kirin devices.
Username.php said:
Name any custom ROM. They're Camera are just bare bones. Having stock camera port is great actually. We can't really complain about camera since we don't have Gcam mod available for kirin devices.
Click to expand...
Click to collapse
Am not complaining dude i was asking for a solution
MeChiku said:
So I flashed 3 ROMS from openkirin.net,
1. LOS
2. Carbon OS
3. RR Os
Everything is fine except the camera apps there. All three Roms have apps that just click normal pics whenever i switch to portrait mode (I must add they contain stock emui camera app) the apps just hangs.
Does anybody have a solution to this to take portrait mode photos on custom roms.
Or any camera ( can be third party ) that can allow me to do so.
Thanks in advance ?
Click to expand...
Click to collapse
Bro i too flashed lineage os beta 4 in honor 7x. But it has too many bugs. How to get back to stock oreo rom.. please help me bro
krishnapenn said:
Bro i too flashed lineage os beta 4 in honor 7x. But it has too many bugs. How to get back to stock oreo rom.. please help me bro
Click to expand...
Click to collapse
Do you even check the "Honor 7x Guides, News, & Discussion" forums lmao???
https://forum.xda-developers.com/honor-7x/how-to/getting-to-stock-emui-super-easily-t3804722
crayonicle said:
Do you even check the "Honor 7x Guides, News, & Discussion" forums lmao???
https://forum.xda-developers.com/honor-7x/how-to/getting-to-stock-emui-super-easily-t3804722
Click to expand...
Click to collapse
No need sir, I've already rolled back successfully to stock oreo Tom. BTW thank you for responding
krishnapenn said:
No need sir, I've already rolled back successfully to stock oreo Tom. BTW thank you for responding
Click to expand...
Click to collapse
Glad to hear that :good:
crayonicle said:
Glad to hear that :good:
Click to expand...
Click to collapse
Sir can you tell me how to relock the bootloader
krishnapenn said:
Sir can you tell me how to relock the bootloader
Click to expand...
Click to collapse
Follow this procedure:
Dr.Anshuman said:
if you have unlocked your bootloader status and you want your original 'Locked' status instead of 'ReLocked' status, follow the procedure.
1. fastboot reboot bootloader
2. fastboot oem relock UnlockCode this will ReLock your bootloader
3. switch on your phone, go to developer menu and Uncheck the OEM unlocking
4. Reboot your phone, done , your Phone status is now "Locked" , FRP is also Locked , you can check it in fastboot mode
5. if you want to unloack FRP, then just go to developer menu and Allow oem unloack, this will turn off FRP but bootloader status remains "LOCKED" , it doesn't change to ReLocked.
Enjoy
Click to expand...
Click to collapse
crayonicle said:
Follow this procedure:
Click to expand...
Click to collapse
After I entered relock command then it rolocked the bootloader and then it factory reset itself and reboot itself. When I went to disable the oem unlocking. It already got disabled. After that I went to check fastboot mode whether everything is unlocked. But it showing the 'relocked' but not 'locked' status. Anything to do sir???
krishnapenn said:
After I entered relock command then it rolocked the bootloader and then it factory reset itself and reboot itself. When I went to disable the oem unlocking. It already got disabled. After that I went to check fastboot mode whether everything is unlocked. But it showing the 'relocked' but not 'locked' status. Anything to do sir???
Click to expand...
Click to collapse
Disable "OEM unlocking" in developer options.
crayonicle said:
Disable "OEM unlocking" in developer options.
Click to expand...
Click to collapse
But it already disabled sir
krishnapenn said:
But it already disabled sir
Click to expand...
Click to collapse
Then bootloader should show "Locked" not "relocked"
crayonicle said:
Then bootloader should show "Locked" not "relocked"
Click to expand...
Click to collapse
It is saying 'bootloader relocked, FRP locked
krishnapenn said:
It is saying 'bootloader relocked, FRP locked
Click to expand...
Click to collapse
I've been searching around the internet, there is no way to make it say "locked"
sorry
crayonicle said:
I've been searching around the internet, there is no way to make it say "locked"
sorry
Click to expand...
Click to collapse
That's ok sir!!! No problem
krishnapenn said:
After I entered relock command then it rolocked the bootloader and then it factory reset itself and reboot itself. When I went to disable the oem unlocking. It already got disabled. After that I went to check fastboot mode whether everything is unlocked. But it showing the 'relocked' but not 'locked' status. Anything to do sir???
Click to expand...
Click to collapse
are you on oreo?
on oreo, if BL is unlocked, developer oem unlocking option will freeze to "oem unlocking Allowed" so this procedure is not useful.
by the way, if you have untouched stock rom, then OTA updates will come even on unlock bootloader and
you can claim warranty with ReLocked status.
Hi i've got a question. I recently purchased the A5 2017 (A520F) secondhand and i want to put a custom rom on it. I have unlocked and flashed tons of phones and tablets in the past so i'm far from a newbee.
My phone has "Bootloader OEM unlock" in dev options.
When i go into odin download mode (vol-, home+power) i dont get any message regarding "RMM state: Prenormal". FRP is unlocked.
Does this mean i'm all set to flash anything without the RMM.zip?
I'm having the latest security patch Jan2020 and Oreo bootloader. Knox is 0x0. Are there any other ways to check RMM state?
JMailuhu said:
Hi i've got a question. I recently purchased the A5 2017 (A520F) secondhand and i want to put a custom rom on it. I have unlocked and flashed tons of phones and tablets in the past so i'm far from a newbee.
My phone has "Bootloader OEM unlock" in dev options.
When i go into odin download mode (vol-, home+power) i dont get any message regarding "RMM state: Prenormal". FRP is unlocked.
Does this mean i'm all set to flash anything without the RMM.zip?
I'm having the latest security patch Jan2020 and Oreo bootloader. Knox is 0x0. Are there any other ways to check RMM state?
Click to expand...
Click to collapse
Reboot device just to check that OEM unlock is still enabled.
Yes, Bootloader OEM unlock switch is still activated.
JMailuhu said:
Yes, Bootloader OEM unlock switch is still activated.
Click to expand...
Click to collapse
Then read a guide like this, there are other workarounds though https://forum.xda-developers.com/t/...e-prenormal-on-oneui-android-pie-9-0.3911862/ but don't flash custom binaries while you don't bypass RMM prenormal status.
Yeah this requires a linux distro so i guess for that method i have to run linux in a VM or dualboot on another partition.
However, it still doesn't explain why i don't have a RMM message. Maybe RMM is gone altogether (not sure if thats possible tho).
Anyway thanks for your replies.
JMailuhu said:
However, it still doesn't explain why i don't have a RMM message. Maybe RMM is gone altogether (not sure if thats possible tho).
Click to expand...
Click to collapse
What do you mean with? You said RMM appears like prenormal.
SubwayChamp said:
What do you mean with? You said RMM appears like prenormal.
Click to expand...
Click to collapse
No i said i did NOT have any message regarding RMM state in download mode
JMailuhu said:
No i said i did NOT have any message regarding RMM state in download mode
Click to expand...
Click to collapse
Oh, sorry, I read bad, and nothing about KG?
It means you don't have remote restrictions, even with FRP.
In this case, you are able to flash custom binaries.
No problem bud, happens to the best of us. Nope nothing about KG either. I wil try and flash twrp etc. Worst case i'll flash back official firmware. Thanks for the help!
Solved: There was no RMM/KG on the device at all so i went and flashed TWRP and Rise-Q OneUI 2.5. Everything went smooth as butter.
Good, if it is not present in download screen, then in this device, either RMM/KG are not implemented.
Old solution didn't work for me. Does anyone know how to fix it in 2023?
ecrissor said:
Old solution didn't work for me. Does anyone know how to fix it in 2023?
Click to expand...
Click to collapse
What was the "old" solution?
Try this:
Boot into system, skip through the setup, connect to WiFi. Go to system settings, enable developer options. OEM Unlocking will not be visible. Force an update check, then go back and check to see if OEM Unlocking became visible. If it has, KG/RMM state should be OK or COMPLETED, and you should be able to flash custom firmware.
V0latyle said:
What was the "old" solution?
Try this:
Boot into system, skip through the setup, connect to WiFi. Go to system settings, enable developer options. OEM Unlocking will not be visible. Force an update check, then go back and check to see if OEM Unlocking became visible. If it has, KG/RMM state should be OK or COMPLETED, and you should be able to flash custom firmware.
Click to expand...
Click to collapse
My kg is checking but rmm ise prenormal, OEM unlock toggle is showing and unlocked
V0latyle said:
What was the "old" solution?
Try this:
Boot into system, skip through the setup, connect to WiFi. Go to system settings, enable developer options. OEM Unlocking will not be visible. Force an update check, then go back and check to see if OEM Unlocking became visible. If it has, KG/RMM state should be OK or COMPLETED, and you should be able to flash custom firmware.
Click to expand...
Click to collapse
Oem unlocking is visible but rmm state still show prenormal
ecrissor said:
Oem unlocking is visible but rmm state still show prenormal
Click to expand...
Click to collapse
I guess KG State is checking but RMM State is prenormal
V0latyle said:
What was the "old" solution?
Try this:
Boot into system, skip through the setup, connect to WiFi. Go to system settings, enable developer options. OEM Unlocking will not be visible. Force an update check, then go back and check to see if OEM Unlocking became visible. If it has, KG/RMM state should be OK or COMPLETED, and you should be able to flash custom firmware.
Click to expand...
Click to collapse
KG and RMM state is not same
Kgstate said:
KG and RMM state is not same
Click to expand...
Click to collapse
Still couldn't flash custom recovery
ecrissor said:
Still couldn't flash custom recovery
Click to expand...
Click to collapse
Did you try to wait 168 hours?
yes, I tried to wait for months and not only the 168 hrs however nothing seems to be working and it's kinda really frustrating
and all tools not working (like chimera, magic crack or whatever they don't work)
I only wanna flash a custom from (one of my rights as an android user (phone is s9+ exynos )
so please if you know any way I can get this done I'd be really grateful
Attia0079 said:
yes, I tried to wait for months and not only the 168 hrs however nothing seems to be working and it's kinda really frustrating
and all tools not working (like chimera, magic crack or whatever they don't work)
I only wanna flash a custom from (one of my rights as an android user (phone is s9+ exynos )
so please if you know any way I can get this done I'd be really grateful
Click to expand...
Click to collapse
There is no way to unlock RMM until Samsung fixes their servers because RMM server is down ( https://rmm.samsung.com )
Kgstate said:
There is no way to unlock RMM until Samsung fixes their servers because RMM server is down ( https://rmm.samsung.com )
Click to expand...
Click to collapse
is there a way we can text their support to do so?
or raise a ticket for them?