Develop Bugs

[Q&A] [ROM][JB][LB/UB] Envi ROM Stock+

Q&A for [ROM][JB][LB/UB] Envi ROM Stock+
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][JB][LB/UB] Envi ROM Stock+. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

black screen help
i came from PA KK rom.
i did exactly as instructed but am stuck at black screen after sony logo
help

bclub said:
i came from PA KK rom.
i did exactly as instructed but am stuck at black screen after sony logo
help
Click to expand...
Click to collapse
Did you wipe data and did you install a stock or stock based kernel
Those are required

oh **** i forgot to put stock based kernel.
lol i was sleepy

every thing is good but there is no status bar on the top ??

bclub said:
every thing is good but there is no status bar on the top ??
Click to expand...
Click to collapse
Reinstall folowing instructions
It probably bugged or something knowing xperia firmware

Should I flash kernel first?
I wonder to know if I must flash kernel first(and where can I find it), before installing BaseV6.zip via twrp. I am coming from 4.4.4 KitKat Paranoid custom rom.
Thank you for help.

natrix82 said:
I wonder to know if I must flash kernel first(and where can I find it), before installing BaseV6.zip via twrp. I am coming from 4.4.4 KitKat Paranoid custom rom.
Thank you for help.
Click to expand...
Click to collapse
i installed S-DooMKernel-JB-v06 kernel first/
still cannot get status bar though
//fs1.d-h.st/
download/00070/
qE0/S-DooMKernel-JB-v06.zip
enter the link as one coz
(To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!)

GPS not working
Hey,
Did a clean flash and installed as instructed.
The problem is that I cant get a Status Fix on GPS anymore. I see that there is 20 satellites in GPS Test & Tools.
Could you please give me some advice. Thank you.

V6
Is V6 stable? If not , what is the lastest stable version? Thank you.

josemarii said:
Is V6 stable? If not , what is the lastest stable version? Thank you.
Click to expand...
Click to collapse
V7

Envious_Data said:
V7
Click to expand...
Click to collapse
Thank you for your fast answer, where can i download it?

josemarii said:
Thank you for your fast answer, where can i download it?
Click to expand...
Click to collapse
Isnt there a download link in the rom thread?

Envious_Data said:
Isnt there a download link in the rom thread?
Click to expand...
Click to collapse
Just for V6

josemarii said:
Just for V6
Click to expand...
Click to collapse
Thats odd
I guess just use V6 for now, probably not much difference between V7 and V6 anyways

[Q&A] [ROM][5.0.2]Android Open Grand Project[LOLLIPOP]

Q&A for [ROM][5.0.2]Android Open Grand Project[LOLLIPOP]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][5.0.2]Android Open Grand Project[LOLLIPOP]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

rom not compatible.
I have 4.2.2 JB.
I have GT9082L
Help me u.u

will it support dual sim features
i have two sim one for internet the other for calls. will this rom cause any issues.

sam.ayush said:
i have two sim one for internet the other for calls. will this rom cause any issues.
Click to expand...
Click to collapse
Check Thread Title ...

Problem with GApp
Hey the link to GApp download is not working.

Gapps
The link for the Gapps is broken.. please rectify the link

help me plzzzz...
In this ROM .. Nightly version 4-1-2015 .. Developer options doesn't work and the performance tap in settings also .. Plz help .. I love this ROM

Fix The Developer Option
1please fix the developer option.
---------- Post added at 06:32 AM ---------- Previous post was at 06:27 AM ----------
nikhy said:
The link for the Gapps is broken.. please rectify the link
Click to expand...
Click to collapse
@nikhy go to this link for the latest Gapps http://http://forum.xda-developers.com/paranoid-android/general/gapps-official-to-date-pa-google-apps-t2943900
hope it help a lot
---------- Post added at 06:37 AM ---------- Previous post was at 06:32 AM ----------
m.velludo said:
Hey the link to GApp download is not working.
Click to expand...
Click to collapse
this link for the latest Gapps
http://forum.xda-developers.com/paranoid-android/general/gapps-official-to-date-pa-google-apps-t2943900
---------- Post added at 07:23 AM ---------- Previous post was at 06:37 AM ----------
@Trach please make/provide an delta update for the latest build like CM12 so we dont need to download a big amount of file in every update
sorry for my grammar

Yess..It has support for dual sim..
sam.ayush said:
i have two sim one for internet the other for calls. will this rom cause any issues.
Click to expand...
Click to collapse
It supports multisim...u have to download MultiSim Toggle apk. Hope this info will help you.

Android 4.4.4 ; Do i need to do Wipe data factory reset ??
Hey ,
I am on Android 4.4.4 AOGP custom Rom !! Do i need to do a factory data wipe to install this rom. Or can i directly install this rom !! Please help! Because i dont want to get all my apps deleted :/ but i want this rom also !!
Thanks.

AOGP-v1.2-i9082-OFFICIAL dual sim not working
pls updates

I'm on the nightly builds 08012015. On the image picture there is around half of my internal is free, but the available tell there is only 200MB. Is it a bug?
And, is there network traffic please?

SIM contacts read, write & display
Dear all recognized Developers @ XDA Developers & worldwide
Hi......!!
Request prevails for developing an Android 5.0.x ROM that can read, write & display SIM contacts together please. Hope appropriate note or cognizance of this would be taken though source code does not have provision for the same. I do not know how it is possible when source code does not have provision for it but then the same should not be impossible.
Thanking you all,
Yours truly,
Diepak S. Talwalker

help
How to enable daul sim plz
Can anyone explain that

lawyerhelal said:
How to enable daul sim plz
Can anyone explain that
Click to expand...
Click to collapse
look for this in post #1 in the link below
this link how to enable/disable it http://forum.xda-developers.com/showthread.php?t=2563557

Where's link for Gapps???
It's link broken or there just no linked???
Thanks

sawel said:
Where's link for Gapps???
It's link broken or there just no linked???
Thanks
Click to expand...
Click to collapse
try this GApps http://forum.xda-developers.com/paranoid-android/general/gapps-official-to-date-pa-google-apps-t2943900

ROM not dual sim yet title shows dual sim
Why does the title of this ROM show that its dual sim, yet the ROM only supports one sim!!
Its misleading , just downloaded it thinking it supports dual sim, to my surprised to find its single sim after flashing!!

the latest official build (lollipop of aogp)
when i installed the latest official build i end up in a bootloop. then i tried to use the nightly built but there are some major bugs please correct it i liked the rom very much
im currently using blisspop v2.0 (lollipop 5.0.2 )
can roll back to kitkat
please help and thanks in advance

AllanUg said:
Why does the title of this ROM show that its dual sim, yet the ROM only supports one sim!!
Its misleading , just downloaded it thinking it supports dual sim, to my surprised to find its single sim after flashing!!
Click to expand...
Click to collapse
Not misleading only problem is people who don't read
As it cleary is saying:
Dual SIM seems to be having lots of issues in AOGP ROM like the whole device just reboots when the screen is turned off etc.We are still currently looking for a fix to this issue so do bear with us if its best for you to stick with Single SIM for now
And the project has stopped and there is nog longer devolpment and support for this rom.
so don't use it
and if you don't want to read then don't start flashing and keep stock

[Q&A] [GT-I9190/I9195][ROM][Official][5.0.2] CyanogenMod 12.0 Nightlies for S4 Mini

[Q&A] [GT-I9190/I9195][ROM][Official][5.0.2] CyanogenMod 12.0 Nightlies for S4 Mini
Q&A for [GT-I9190/I9195][ROM][Official][5.0.2] CyanogenMod 12.0 Nightlies for S4 Mini 3G/LTE
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [GT-I9190/I9195][ROM][Official][5.0.2] CyanogenMod 12.0 Nightlies for S4 Mini 3G/LTE. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

Arco, I don't think you'll ever be thanked enough for all the work you have done for the S4 mini. I mean it. Many, many, many thanks and please keep it up for as long as you can because plenty of us appreciate what you're doing. I'm part of a big silent majority (longtime lurker of the XDA forums, never poster) and I've made this account just to tell you this.

Hi
This is awesome, firstly thanks to arco68 and Cm team and contributors for all this hard work.:good:
Id like to know has anyone experienced no-sound-in-call bug? and how is bluetooth audio these days?

How long does the first reboot?
I have already installed twice, but when I reboot is in the CM Logo boot more than 20 minutes does not start.
Did a clean install! And my recovery is the latest 6.0.5.1!
At this point I have not done reboot and is working, but when you? Until I'm afraid!
Does anyone have this problem?

MushyMan said:
Hi
This is awesome, firstly thanks to arco68 and Cm team and contributors for all this hard work.:good:
Id like to know has anyone experienced no-sound-in-call bug? and how is bluetooth audio these days?
Click to expand...
Click to collapse
Hi, I think BT audio is fixed but I can't confirm you about the car...
xuleca said:
How long does the first reboot?
I have already installed twice, but when I reboot is in the CM Logo boot more than 20 minutes does not start.
Did a clean install! And my recovery is the latest 6.0.5.1!
At this point I have not done reboot and is working, but when you? Until I'm afraid!
Does anyone have this problem?
Click to expand...
Click to collapse
Hi, your device has booted ?

Oijkn said:
Hi, your device has booted ?
Click to expand...
Click to collapse
First time YES, but if I reboot it's stuck in CM logo.

Did you check the md5 of your downloaded file perhaps it's bad ?

xuleca said:
How long does the first reboot?
Click to expand...
Click to collapse
The first boot loop animation lasted 12 minutes in my case. But I also installed a full stock gapps package, so I think it shouldn't be longer than that.

Oijkn said:
Did you check the md5 of your downloaded file perhaps it's bad ?
Click to expand...
Click to collapse
I check and checksum is ok
---------- Post added at 10:22 PM ---------- Previous post was at 10:20 PM ----------
puscasumarin said:
The first boot loop animation lasted 12 minutes in my case. But I also installed a full stock gapps package, so I think it shouldn't be longer than that.
Click to expand...
Click to collapse
And did you reboot after?
My first boot take some time but boot, the problem is when I reboot

Try to do a full wipe but with another recovery like Philz Touch and do a new clean install.

How can i disable the hardware button light up when i touch the screen? i only want them to light op when i touch the buttons.
Thanks in advance.

update
Hey! Will we get upates ofer the cm update( from setings ) or we have to flash every new build?
Thanks for suport!

Normally you can use the CM Update from the settings that work great !
But for my part I prefer to download it from my computer because sometime I've got an md5sum error if I download it from my phone (depend of your internet connection...).

Oijkn said:
Normally you can use the CM Update from the settings that work great !
But for my part I prefer to download it from my computer because sometime I've got an md5sum error if I download it from my phone (depend of your internet connection...).
Click to expand...
Click to collapse
SAme here one time
@ Daryl the light can.t be enabled only on toch the buttons .

xuleca said:
And did you reboot after?
My first boot take some time but boot, the problem is when I reboot
Click to expand...
Click to collapse
After all was set up and running, I did at least one manual reboot. Everything went normal for me.

Oh.. It's annoying Every time i touch the screen it lights up..
And messages app FC cleared data same
Btw, perfect cm rom!

DaryI said:
Oh.. It's annoying Every time i touch the screen it lights up..
And messages app FC cleared data same
Btw, perfect cm rom!
Click to expand...
Click to collapse
You cand disable the light and problem solved :
message app works well until now. No problem here

Hi, can someone please confirm or put me in the right direction. Thanks in advance.
I'm currently running F4k unofficial cm 12 with F4k pre4 kernel, if I format everything and clean install this ROM will I have to flash a different kernel (if so which one) or will it install its own kernal along with the rom? as I've read that f4k pre4 kernel is not a good combination with this rom as it works in a different way.
Hope this makes sense an someone can enlighten me.
Thanks

Insomniac-Butler said:
Hi, can someone please confirm or put me in the right direction. Thanks in advance.
I'm currently running F4k unofficial cm 12 with F4k pre4 kernel, if I format everything and clean install this ROM will I have to flash a different kernel (if so which one) or will it install its own kernal along with the rom? as I've read that f4k pre4 kernel is not a good combination with this rom as it works in a different way.
Hope this makes sense an someone can enlighten me.
Thanks
Click to expand...
Click to collapse
Flashing this official CM and GApps you will have CM kernel as all. :good:

BLN control says that kernel doesn't support functionality :/

[Q&A] [ROM][UB][5.0.2][ZL]GZR Validus 7 ROM official builds {Linaro+Sabermod}

Q&A for [ROM][UB][5.0.2][ZL]GZR Validus 7 ROM official builds {Linaro+Sabermod}
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][UB][5.0.2][ZL]GZR Validus 7 ROM official builds {Linaro+Sabermod}. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

MHL
Support mhl for tgis rom..? If not, please,.,. Give me solution,. Im realy want this rom

Iebnoe.adja said:
Support mhl for tgis rom..? If not, please,.,. Give me solution,. Im realy want this rom
Click to expand...
Click to collapse
i didn't tried it i have no mhl cable.
if its not working there's no solution for now.

@alex when i try to apply white theme in the rom it doesnt chng to white but in candyrom the theme changes its color !!!!

Thats the price to use validus for now...not themable yet.
I mean yeah, u can theme, but frameworks been changed to black, so themers and validus head dev working on this kind of issue...

Not sure if its something I did wrong but I lost root after update. Supersu tried to update binary then said no root. Will try to install again.
Maybe is was something I did. Wiped caches and flashed ROM plus PA gapps and root is back. Awesome ROM thanks!

Optilicious said:
Not sure if its something I did wrong but I lost root after update. Supersu tried to update binary then said no root. Will try to install again.
Maybe is was something I did. Wiped caches and flashed ROM plus PA gapps and root is back. Awesome ROM thanks!
Click to expand...
Click to collapse
flash this in recovery next time it happens

Query on Recovery
Hello, Good Day!!!
I am currently using this ROM and I want to back up the this to try other ROMs. How can I back up this ROM since there are no back up feature in the CM Recovery?
Do I need to flash other kernel (example advance kernel) that has recovery to back up the ROM then reflash the CM kernel again?
Thank you,
PS: This is my first post. 
Love the ROM.

MarkRamirez said:
Hello, Good Day!!!
I am currently using this ROM and I want to back up the this to try other ROMs. How can I back up this ROM since there are no back up feature in the CM Recovery?
Do I need to flash other kernel (example advance kernel) that has recovery to back up the ROM then reflash the CM kernel again?
Thank you,
PS: This is my first post. 
Love the ROM.
Click to expand...
Click to collapse
flash twrp onto fota partition and make a nandbackup from it, or else use titanium backup pro app....or superbackup there's plenty

Thank for the quick reply.
Can you me a link for the procedures on flashing twrp onto fota? I'm afraid that i might use an incompatible procedures that may break my phone?
I cannot use titanium back up in case of bootloop right? I should use nandroid back up.
Sorry for being demanding.
Thanks in advance. :victory:
Alx31TLse said:
flash twrp onto fota partition and make a nandbackup from it, or else use titanium backup pro app....or superbackup there's plenty
Click to expand...
Click to collapse

MarkRamirez said:
Thank for the quick reply.
Can you me a link for the procedures on flashing twrp onto fota? I'm afraid that i might use an incompatible procedures that may break my phone?
I cannot use titanium back up in case of bootloop right? I should use nandroid back up.
Sorry for being demanding.
Thanks in advance. :victory:
Click to expand...
Click to collapse
i used xperia recovery manager .. there is a thread in the cross dev section ..

Hi,
Am I the only that cannot connect to Mobile Network using this rom? Wifi is working fine, however, when connecting thru mobile it cannot establish any connection. I've also encountered this in the new version of Candy5.
Thanks

MarkRamirez said:
Hi,
Am I the only that cannot connect to Mobile Network using this rom? Wifi is working fine, however, when connecting thru mobile it cannot establish any connection. I've also encountered this in the new version of Candy5.
Thanks
Click to expand...
Click to collapse
revert back to previous build as there are issues on calling from cm .
not had this issue in previous build or latest except calling

demonicangell™ said:
revert back to previous build as there are issues on calling from cm .
not had this issue in previous build or latest except calling
Click to expand...
Click to collapse
So the issue on calling affects the mobile network?
Thanks

MarkRamirez said:
So the issue on calling affects the mobile network?
Thanks
Click to expand...
Click to collapse
no, actually now i am facing this issue on ressurrection remix .. as many others are ..but on latest candyrom 1.0.0 i had 3g working just fine with clean wipe

demonicangell™ said:
no, actually now i am facing this issue on ressurrection remix .. as many others are ..but on latest candyrom 1.0.0 i had 3g working just fine with clean wipe
Click to expand...
Click to collapse
We had different experience since i do not have issue on calling on Candyrom. Just the mobile network.
Edit:
Have anyone here tried to install the Xposed for Lollipop?

Hi. How is battery life compared to Resurrection Remix mod ?
And what is not working/ buggy at the moment with this rom ?

in settings when you click on Privacy, it says backup & reset at the top...
also in 'the void/statusbar' 'clock style hidden' does not stay after a reboot or even after unlock screen the clock reapears but the setting says hidden... these things are bugs right?
what did cm12 have to change to fix the wakelocks on google services? something about mixmatched versions?

ham5 said:
in settings when you click on Privacy, it says backup & reset at the top...
also in 'the void/statusbar' 'clock style hidden' does not stay after a reboot or even after unlock screen the clock reapears but the setting says hidden... these things are bugs right?
what did cm12 have to change to fix the wakelocks on google services? something about mixmatched versions?
Click to expand...
Click to collapse
yes these are bugs
i didn't get you on mixmatched thing what u mean?

I suffer from the wakelock and was able to temporaly solve it by using privacy guard on the service... this is one link I found - http://www.reddit.com/r/Android/comments/2zrxwi/320_cm12_nightly_google_play_services_7x_wakelock/

[Q&A] [ROM] Cyanogenmod 11 06/04/2015

Q&A for [ROM] Cyanogenmod 11 06/04/2015
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] Cyanogenmod 11 06/04/2015. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

camera
hi. good job
video recorder not working

jocamoaz said:
hi. good job
video recorder not working
Click to expand...
Click to collapse
yeah that is a cm11 bug from before

I tried to (I got the cpu step) rom and I like. But what is the difference between RELEASE 3 and (got the cpu step) and I wonder fix some performance stabilization in Release 3

I wanted to write in that rom's forum but I have written so far

Sorry i cant speak good english, i want to flash this rom to my phone and the phone give it for me : installation aborted status 0. What can i make? my cwm is 6.0.3.2 and i want flash from other 4.4.2 rom.
Thanks for help.

first you have to use cwm 6.0.5.3 for gio,than do a factory reset first with 6.0.5.3 and than flash rom.

devrieshh said:
first you have to use cwm 6.0.5.3 for gio,than do a factory reset first with 6.0.5.3 and than flash rom.
Click to expand...
Click to collapse
can u add a link for me from cwm 6.0.5.3? please. thank you

Starchm said:
can u add a link for me from cwm 6.0.5.3? please. thank you
Click to expand...
Click to collapse
You can get it from this post here
http://forum.xda-developers.com/showthread.php?p=54754255
Sent from my XT1039 using XDA Free mobile app

....ty for link and helps

Hello !
I have recently installed this ROM (Release 4.5 + Video Recording patch). Everything works.
I would like to know however, where I could get a functionnal G-Apps ? I only really need the Google Play Store + whatever else makes the Play Store work.
Hope you can help me, thanks.

Future development
Hi there HerroYou,
I want to say thank you for this stable rom. It works pretty well without significant bugs.
Will you continue its development? It will be nice to hear something about ART instead of Dalvik
It's a joke, of course, but will be pretty nice if you could improve it further...
Wish you all the best!
---------- Post added at 11:02 PM ---------- Previous post was at 10:59 PM ----------
burnout6010 said:
Hello !
I would like to know however, where I could get a functionnal G-Apps ? I only really need the Google Play Store + whatever else makes the Play Store work.
Hope you can help me, thanks.
Click to expand...
Click to collapse
You should install these Gapps: link, it works well.
For CM11, of course.

corlik said:
You should install these Gapps: link, it works well.
For CM11, of course.
Click to expand...
Click to collapse
Thanks for answering.
I flashed a completely fresh install of the ROM with the indicated G-Apps (+CM-Account) and now get "Google Play Services has stopped" errors constantly.
Am I doing something wrong ? I don't understand.

corlik said:
Hi there HerroYou,
I want to say thank you for this stable rom. It works pretty well without significant bugs.
Will you continue its development? It will be nice to hear something about ART instead of Dalvik
It's a joke, of course, but will be pretty nice if you could improve it further...
Wish you all the best!
Click to expand...
Click to collapse
Sorry for the late reply,
I might continue development for this phone. I might stop after I get a working camera for cm11 (autofocus).

Cloud
who have the latest version, just in another cloud (gdrive, one, mega) and tell me how to update the firmware version of the 2013 s to the final (possibly version bore the other person)

final download
hello all sorry I'm new
which version should i download for my galaxy gio
msm or msm7x27
and can you please explain briefly what they are and why
Thanx

Cyber Skull said:
hello all sorry I'm new
which version should i download for my galaxy gio
msm or msm7x27
and can you please explain briefly what they are and why
Thanx
Click to expand...
Click to collapse
It depends which kernel version you want to use.
msm is 3.0.31 and msm7x27 is 2.6.37
Sent from my XT1039 using XDA Free mobile app

cvamoose said:
It depends which kernel version you want to use.
msm is 3.0.31 and msm7x27 is 2.6.37
Sent from my XT1039 using XDA Free mobile app
Click to expand...
Click to collapse
as i said im new to this and any suggestions