Q&A for [ROM][JB][LB/UB] Envi ROM Stock+
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][JB][LB/UB] Envi ROM Stock+. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
black screen help
i came from PA KK rom.
i did exactly as instructed but am stuck at black screen after sony logo
help
bclub said:
i came from PA KK rom.
i did exactly as instructed but am stuck at black screen after sony logo
help
Click to expand...
Click to collapse
Did you wipe data and did you install a stock or stock based kernel
Those are required
oh **** i forgot to put stock based kernel.
lol i was sleepy
every thing is good but there is no status bar on the top ??
bclub said:
every thing is good but there is no status bar on the top ??
Click to expand...
Click to collapse
Reinstall folowing instructions
It probably bugged or something knowing xperia firmware
Should I flash kernel first?
I wonder to know if I must flash kernel first(and where can I find it), before installing BaseV6.zip via twrp. I am coming from 4.4.4 KitKat Paranoid custom rom.
Thank you for help.
natrix82 said:
I wonder to know if I must flash kernel first(and where can I find it), before installing BaseV6.zip via twrp. I am coming from 4.4.4 KitKat Paranoid custom rom.
Thank you for help.
Click to expand...
Click to collapse
i installed S-DooMKernel-JB-v06 kernel first/
still cannot get status bar though
//fs1.d-h.st/
download/00070/
qE0/S-DooMKernel-JB-v06.zip
enter the link as one coz
(To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!)
GPS not working
Hey,
Did a clean flash and installed as instructed.
The problem is that I cant get a Status Fix on GPS anymore. I see that there is 20 satellites in GPS Test & Tools.
Could you please give me some advice. Thank you.
V6
Is V6 stable? If not , what is the lastest stable version? Thank you.
josemarii said:
Is V6 stable? If not , what is the lastest stable version? Thank you.
Click to expand...
Click to collapse
V7
Envious_Data said:
V7
Click to expand...
Click to collapse
Thank you for your fast answer, where can i download it?
josemarii said:
Thank you for your fast answer, where can i download it?
Click to expand...
Click to collapse
Isnt there a download link in the rom thread?
Envious_Data said:
Isnt there a download link in the rom thread?
Click to expand...
Click to collapse
Just for V6
josemarii said:
Just for V6
Click to expand...
Click to collapse
Thats odd
I guess just use V6 for now, probably not much difference between V7 and V6 anyways
Related
Q&A for [ROM][FLO] Android 5.0 Lollipop lpx13d flashable pack
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][FLO] Android 5.0 Lollipop lpx13d flashable pack. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
nexus 7 lpx13d flashable pack
hey guys if some still searching for the bluetooth problem, try freezing the root bluetooth app with root uninstaller, now i can use my n7 without issues and without airplane mode
LPX13D W/ Fixed Bluetooth
Hi,
Just Click Link... LPX13D Totally Working.. Don't forget to ROOT..
https://s.basketbuild.com/devs/Tassadar/stock_zips/
Have Fun!
Sky2112007
Multirom autoboot
hey guys
I just flashed the dev preview and so far its amazing.
The only problem I'm having is with multirom autoboot not starting.
When ever I reboot the system it never asks me if I want to boot my secondary rom.
My primary Rom is CM11 w/ elementalx Kernel.
If anyone can help me out it would be amazing, but the preview is really good.
Going to test it out for a couple days.
Sky2112007 said:
Hi,
Just Click Link... LPX13D Totally Working.. Don't forget to ROOT..
https://s.basketbuild.com/devs/Tassadar/stock_zips/
Have Fun!
Sky2112007
Click to expand...
Click to collapse
Even with bluetooth working?
OPO Yeauh!!!
That's only the dev preview. Keep that in mind.
ota?
I flashed this will i still receive otas?
cadeross said:
I flashed this will i still receive otas?
Click to expand...
Click to collapse
Why? Just download and install the regular stock rooted 5.0.1 version...
But to actually answer your question...I am not sure.
AarSyl said:
Why? Just download and install the regular stock rooted 5.0.1 version...
But to actually answer your question...I am not sure.
Click to expand...
Click to collapse
I tried i usually would i already flashed this due to slme stupid error that nobody i know cam figure out with adb. Same with nexus toolkit. But im not too worried. I just am curious. I had a custom recovery which is giving me more issues then not. Thanks for the reply though
cadeross said:
I tried i usually would i already flashed this due to slme stupid error that nobody i know cam figure out with adb. Same with nexus toolkit. But im not too worried. I just am curious. I had a custom recovery which is giving me more issues then not. Thanks for the reply though
Click to expand...
Click to collapse
What error with adb? Give me a chance to help you. You can reply here, or send me a PM.
Q&A for [KERNEL] Xcelerate™ [Synapse][Updated:01/14]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [KERNEL] Xcelerate™ [Synapse][Updated:01/14]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
kairi_zeroblade said:
You would like to consider rephrasing that as it sounded offensive for me..you could have atleast posted a logcat, kmsg, dmesg i can look at regarding your issue instead of whining here that it ran into issues..why don't you build the kernel without a device??
Do you even have an idea how a Snapdragon 400 works?? binaries controlling cpu activity/frequency?? One guess is your thermal engine that throttles CPU down..
Don't worry I will try to implement a thermal solution for you guys..
/rant off
I hate waking up to this kind of post..
Click to expand...
Click to collapse
my bad sry cudnt giff a logcat just a nooob here thanks for the work though kernel is smooth
Haven’t received the Apps...
Thanks Buddy for Kernel,
I have installed the Kernel but not able to view SYNAPSE apps.
Sorry for BAD english...
Anilsalve85 said:
Thanks Buddy for Kernel,
I have installed the Kernel but not able to view SYNAPSE apps.
Sorry for BAD english...
Click to expand...
Click to collapse
Download it from playstore!
How its work !
Gh0sT.RPG said:
Download it from playstore!
Click to expand...
Click to collapse
How its work ???
please suggest if any :angel:
Thanks for the continued development of this kernel.
Have successfully installed to Carbon ROM RC5 and trying it out! So far, all seems good.... very good!
Peace.
Edit: Ok, spoke too soon. Wifi seems broke, but this may be kernel compatibility patch from another (well known) thread.
Any logcat I can upload to troubleshoot?
Peace.
Anilsalve85 said:
How its work ???
please suggest if any :angel:
Click to expand...
Click to collapse
you better leave it as is if you don't know how to use synapse/trickster, just use default ondemand + cfq should be enough
Nice Answer !!!!!!
dels07 said:
you better leave it as is if you don't know how to use synapse/trickster, just use default ondemand + cfq should be enough
Click to expand...
Click to collapse
thanks buddy ...
nice line
Tried the previous one then flashed the new one
Click to expand...
Click to collapse
tried on latest TWRP 2.8.4.0 with step:
1. Flash ROM CM11-R15 and PAGapps
2. Reboot
3. Flash the previous one (Armani-prod-bld1.zip)
4. Then flash the latest one (Armani-prod-bld2b-npr.zip)
the kernel still show the previous build with Mon Jan 12
I have a problem with the last update. CPU Max Frequency is fixed at 1593MHz and I can't change it (tried from Synapse and from CM11 settings)
Hi.. i just hoping that you can make this awesome kernel available to flash on stock MIUI v.45 ROM. Thank you in advance
#i'm dying to try out this kernel
Fast and smooth!
I am using this kernel, and the previous release of it, for three days, and everything goes fast and smooth. No lags, no reboots, no heating issues!
Keep on the amazing work!
Edit: I am running CM11 R15. I don't know for real but i think the vibration is stronger with this Kernel.
After running this kernal for 3 days I can say that this kernal provides great balance between battery life and performance great work .
update please
guys rc16 is out with no call screen bug and the bad thing is that the bug is fix is related to stock cm11 kernel so we cant flash a custom kernel on rc16 as people reported that there are random reboots and some other issues so please devs update the kernel to the latest cm build please
how the right step to flash the updated kernel?
it still show build1 after flash the build2 and/or build3.
At the time flashing in Twrp latest version,it is telling no md5 file and after flashing it is bootlooping any one tell suggestion
Thank you dev for your hard work.
IM on crdroid b4...can i flash the build 3 of this kernel? and can you tell me exactly how? or do i just dirty flash it?..thanks in advance!
viggyv said:
IM on crdroid b4...can i flash the build 3 of this kernel? and can you tell me exactly how? or do i just dirty flash it?..thanks in advance!
Click to expand...
Click to collapse
Just wipe cache and dalvik cache,
Then flash the kernel thats all,it will work.
BATVIC said:
Just wipe cache and dalvik cache,
Then flash the kernel thats all,it will work.
Click to expand...
Click to collapse
Can you please tell me which version of build 3 u flashed on crDroid b4? I tried "Armani-prod-bld3b-npr.zip" and flashed as u told. Please help
Thank you!
Q&A for [ROM] [5.x.x.] [lt03wifi][P600][Nightly] LiquidSmooth
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] [5.x.x.] [lt03wifi][P600][Nightly] LiquidSmooth. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
S-Pen integration?
priccis said:
S-Pen integration?
Click to expand...
Click to collapse
Settings Input bottom of the page.
LiquidSmooth maintainer for d2usc/vzw & p600
Newbie question
So, going forward, what will the update process be using this ROM? It will require flashing the new version? Will that erase my data/apps each time or is there a way to do it as if you were doing an update from a manufacturer?
TIA
EldoradoSan said:
So, going forward, what will the update process be using this ROM? It will require flashing the new version? Will that erase my data/apps each time or is there a way to do it as if you were doing an update from a manufacturer?
TIA
Click to expand...
Click to collapse
Full wipe with TWRP, wipe system, data, and caches. You can use Titanium back up to back up apps and their data and restore them after an update.
LiquidSmooth maintainer for d2usc/vzw & p600
Thanks. I installed it over the weekend and it is amazing how much better the system is now.
nice rom
Nice ROM Orion!
Tablet is amazing now. Thanks for the work you did on this.
Was just wondering if it's possible to get multi windows on this ROM?
goldensun7 said:
Nice ROM Orion!
Tablet is amazing now. Thanks for the work you did on this.
Was just wondering if it's possible to get multi windows on this ROM?
Click to expand...
Click to collapse
Multi window is a Samsung feature as soon as same one makes an aosp version I will added it.
LiquidSmooth maintainer for d2usc/vzw & p600
Many thanks to your work.
I wonder that is this rom fully supported spen features? Like original rom?
yrgat said:
Many thanks to your work.
I wonder that is this rom fully supported spen features? Like original rom?
Click to expand...
Click to collapse
S-Pen works great, but it doesn't have the Air Command like stock does. I do include what is called S-Pen gestures from Temasek ROM these gestures are good replacement for Air Command.
LiquidSmooth maintainer for d2usc/vzw & p600
cant download from the links
there seems to be a problem with liquid site i dont see download button anywhere please fix it
i tried several times but without succes
Cant download the room from your site, can you please fix it ?? there is no download button :-/
Dragi2k said:
Cant download the room from your site, can you please fix it ?? there is no download button :-/
Click to expand...
Click to collapse
What site.
Sent from my SM-P600 using Tapatalk
Orion116 said:
What site.
Sent from my SM-P600 using Tapatalk
Click to expand...
Click to collapse
liquidsmooth.net / downloads / lt03wifi.html
on tablet and handy i can download it(dolphine) , but on pc it not working (firefox;IE)
Dragi2k said:
liquidsmooth.net / downloads / lt03wifi.html
on tablet and handy i can download it(dolphine) , but on pc it not working (firefox;IE)
Click to expand...
Click to collapse
I always just use my tablet to download it if I need to. Chrome
Sent from my SCH-R530U using Tapatalk
Q&A for [ROM] Cyanogenmod 11 06/04/2015
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] Cyanogenmod 11 06/04/2015. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
camera
hi. good job
video recorder not working
jocamoaz said:
hi. good job
video recorder not working
Click to expand...
Click to collapse
yeah that is a cm11 bug from before
I tried to (I got the cpu step) rom and I like. But what is the difference between RELEASE 3 and (got the cpu step) and I wonder fix some performance stabilization in Release 3
I wanted to write in that rom's forum but I have written so far
Sorry i cant speak good english, i want to flash this rom to my phone and the phone give it for me : installation aborted status 0. What can i make? my cwm is 6.0.3.2 and i want flash from other 4.4.2 rom.
Thanks for help.
first you have to use cwm 6.0.5.3 for gio,than do a factory reset first with 6.0.5.3 and than flash rom.
devrieshh said:
first you have to use cwm 6.0.5.3 for gio,than do a factory reset first with 6.0.5.3 and than flash rom.
Click to expand...
Click to collapse
can u add a link for me from cwm 6.0.5.3? please. thank you
Starchm said:
can u add a link for me from cwm 6.0.5.3? please. thank you
Click to expand...
Click to collapse
You can get it from this post here
http://forum.xda-developers.com/showthread.php?p=54754255
Sent from my XT1039 using XDA Free mobile app
....ty for link and helps
Hello !
I have recently installed this ROM (Release 4.5 + Video Recording patch). Everything works.
I would like to know however, where I could get a functionnal G-Apps ? I only really need the Google Play Store + whatever else makes the Play Store work.
Hope you can help me, thanks.
Future development
Hi there HerroYou,
I want to say thank you for this stable rom. It works pretty well without significant bugs.
Will you continue its development? It will be nice to hear something about ART instead of Dalvik
It's a joke, of course, but will be pretty nice if you could improve it further...
Wish you all the best!
---------- Post added at 11:02 PM ---------- Previous post was at 10:59 PM ----------
burnout6010 said:
Hello !
I would like to know however, where I could get a functionnal G-Apps ? I only really need the Google Play Store + whatever else makes the Play Store work.
Hope you can help me, thanks.
Click to expand...
Click to collapse
You should install these Gapps: link, it works well.
For CM11, of course.
corlik said:
You should install these Gapps: link, it works well.
For CM11, of course.
Click to expand...
Click to collapse
Thanks for answering.
I flashed a completely fresh install of the ROM with the indicated G-Apps (+CM-Account) and now get "Google Play Services has stopped" errors constantly.
Am I doing something wrong ? I don't understand.
corlik said:
Hi there HerroYou,
I want to say thank you for this stable rom. It works pretty well without significant bugs.
Will you continue its development? It will be nice to hear something about ART instead of Dalvik
It's a joke, of course, but will be pretty nice if you could improve it further...
Wish you all the best!
Click to expand...
Click to collapse
Sorry for the late reply,
I might continue development for this phone. I might stop after I get a working camera for cm11 (autofocus).
Cloud
who have the latest version, just in another cloud (gdrive, one, mega) and tell me how to update the firmware version of the 2013 s to the final (possibly version bore the other person)
final download
hello all sorry I'm new
which version should i download for my galaxy gio
msm or msm7x27
and can you please explain briefly what they are and why
Thanx
Cyber Skull said:
hello all sorry I'm new
which version should i download for my galaxy gio
msm or msm7x27
and can you please explain briefly what they are and why
Thanx
Click to expand...
Click to collapse
It depends which kernel version you want to use.
msm is 3.0.31 and msm7x27 is 2.6.37
Sent from my XT1039 using XDA Free mobile app
cvamoose said:
It depends which kernel version you want to use.
msm is 3.0.31 and msm7x27 is 2.6.37
Sent from my XT1039 using XDA Free mobile app
Click to expand...
Click to collapse
as i said im new to this and any suggestions
Q&A for [ROM][TW][SM-T807T] SuperSkilled ROM V1
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][TW][SM-T807T] SuperSkilled ROM V1. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Question on Kernel
Simple question of curiosity, does this rom have a modified kernel, or just a custom rom itself?
Thank you.
Ceirnos said:
Simple question of curiosity, does this rom have a modified kernel, or just a custom rom itself?
Thank you.
Click to expand...
Click to collapse
Custom rom itself
Sent from my SM-T800 using Tapatalk
DUHAsianSKILLZ said:
Custom rom itself
Sent from my SM-T800 using Tapatalk
Click to expand...
Click to collapse
Thank you for your quick reply I appreciate your work. thank you.
DUHAsianSKILLZ said:
If there are any Tmobile users left, can anyone please test this and see if it boots? https://www.androidfilehost.com/?fid=24052804347764781
It is 5.0.2 Lollipop TW with a few tweaks and minor things debloated in it. Its only a matter of time before T807T gets CM12 or something similar. But hey why not anyway xD
You also need an LP bootloader if you havent upgraded to the latest lollipop update
Click to expand...
Click to collapse
I'll test it. I'm using CWM on my T807T. Will that work or do I need to use something different to flash it?
EXiTiUM1 said:
I'll test it. I'm using CWM on my T807T. Will that work or do I need to use something different to flash it?
Click to expand...
Click to collapse
Have you odined the latest Lollipop firmware yet?
DUHAsianSKILLZ said:
Have you odined the latest Lollipop firmware yet?
Click to expand...
Click to collapse
I did this and then loaded PhillZ CWM. Tried some T805 roms and failed gloriously with those.
porting
when are you going to be porting iron man roms to t-mobile tab s 10.5
and also the gwiz rom got stuck at the boot when in installed it
---------- Post added at 03:07 PM ---------- Previous post was at 02:25 PM ----------
the gwiz rom did not work for me
i had skilled rom the flashed the gwiz and got soft bricked.
Testing
I tried installing both the normal and cut down rom the normal one did not even boot up and the cut down the rom only got to the Google loading screen and that's it.
Testing
Only got the splash screen and Froze there.
Unfortunately, same here. Straight and deo just soft bricked at splash.
Are there any instructions on how to build a custom rom?
dongarritas said:
Unfortunately, same here. Straight and deo just soft bricked at splash.
Click to expand...
Click to collapse
I just purchased a Samsung Tab S 10.5 T807T tablet. As you can imagine with 16gb, I'm running out of space and would love to lean this tablet up if possible and move as much as possible to the 128gb micro sdxc card I have installed.
Thanks!
Arbywan!