Develop Bugs

Help recover my Galaxy note 2

hey
an hour ago i got this massage on my phone after trying to recover my note 2
E:failed to find "cache" partition to mount at "/cache"
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
E:failed to find "cache" partition to mount at "/cache"
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
E:Can't find misc
E:failed to find "cache" partition to mount at "/cache"
and i tried to recover it again using odin but this is the result
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXALJ3_N7100OJVALJ2_N7100XXALJ2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
and the mobile not working now the only thing that works is odin mode so plz help mee
sorry for my bad language

architect_zr said:
hey
an hour ago i got this massage on my phone after trying to recover my note 2
E:failed to find "cache" partition to mount at "/cache"
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
E:failed to find "cache" partition to mount at "/cache"
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
E:Can't find misc
E:failed to find "cache" partition to mount at "/cache"
and i tried to recover it again using odin but this is the result
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXALJ3_N7100OJVALJ2_N7100XXALJ2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
and the mobile not working now the only thing that works is odin mode so plz help mee
sorry for my bad language
Click to expand...
Click to collapse
simply flash the stock firmware using Odin. remember to use pit for note2 in odin while flashing stock,, . happy flashing

tornado92 said:
simply flash the stock firmware using Odin. remember to use pit for note2 in odin while flashing stock,, . happy flashing
Click to expand...
Click to collapse
i didn`t understand :S

I don't know why to use pit. Whenever I flash my phone, I only use PDA, then PIT is for what? can anyone explain to me?
Sent from my GT-N7100 using xda app-developers app

Read Dr. Ketan guide
Pit file is only used under proper expertise.
Sent from my GT-N7100 using xda premium

aukhan said:
Read Dr. Ketan guide
Pit file is only used under proper expertise.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
how can i use it

architect_zr said:
how can i use it
Click to expand...
Click to collapse
Have a look at this: http://forum.xda-developers.com/showpost.php?p=32273406&postcount=5
N7100XXDLL7 FACTORY Firmware has a PIT file. You have to check 'Re-partition' box in Odin and put this PIT file in the related field.

Memphis_ said:
Have a look at this: http://forum.xda-developers.com/showpost.php?p=32273406&postcount=5
N7100XXDLL7 FACTORY Firmware has a PIT file. You have to check 'Re-partition' box in Odin and put this PIT file in the related field.
Click to expand...
Click to collapse
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_N7100XXDLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_N7100XXDLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_N7100XXDLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_XEF_N7100OXADLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
this is what i got and this takes ages and still the problem n`t solved :S

Memphis_ said:
Have a look at this: http://forum.xda-developers.com/showpost.php?p=32273406&postcount=5
N7100XXDLL7 FACTORY Firmware has a PIT file. You have to check 'Re-partition' box in Odin and put this PIT file in the related field.
Click to expand...
Click to collapse
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_N7100XXDLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_N7100XXDLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_N7100XXDLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_XEF_N7100OXADLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)

architect_zr said:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_N7100XXDLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_N7100XXDLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_N7100XXDLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_XEF_N7100OXADLJ2_422394_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Are you sure you connected in download mode? Turnyour phone off and connect by usb cable and run odin. Some say that worked.
Sent from my GT-N7105 using xda premium

xcly said:
Are you sure you connected in download mode? Turnyour phone off and connect by usb cable and run odin. Some say that worked.
Sent from my GT-N7105 using xda premium
Click to expand...
Click to collapse
this is what i see

plz guys help me

architect_zr said:
plz guys help me
Click to expand...
Click to collapse
can your phone boot?? stucked at Samsung logo?? please at this stage dont try to flash bootloaders..

tornado92 said:
can your phone boot?? stucked at Samsung logo?? please at this stage dont try to flash bootloaders..
Click to expand...
Click to collapse
so what i should do in this stage :S

architect_zr said:
so what i should do in this stage :S
Click to expand...
Click to collapse
can your phone boot?? stucked at Samsung logo??

architect_zr said:
so what i should do in this stage :S
Click to expand...
Click to collapse
Start from scratch. Close Odin.
1. Make sure you have samsung drivers (install kies and then make sure it's not running)
2. Open odin. Choose firmware in the PDA section. Dont touch anything else.
3. Boot your phone into download mode (vol down home power).
4. Connect to pc using cable.
5. Press start.
If the above doesnt work (you said pit file werent there in the previous post), get the correct pit file and select it for pit section and select repartition on odin while doing number 2 as above
Sent from my GT-N7105 using xda premium

xcly said:
Start from scratch. Close Odin.
1. Make sure you have samsung drivers (install kies and then make sure it's not running)
2. Open odin. Choose firmware in the PDA section. Dont touch anything else.
3. Boot your phone into download mode (vol down home power).
4. Connect to pc using cable.
5. Press start.
If the above doesnt work (you said pit file werent there in the previous post), get the correct pit file and select it for pit section and select repartition on odin while doing number 2 as above
Sent from my GT-N7105 using xda premium
Click to expand...
Click to collapse
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXALJ3_N7100OJVALJ2_N7100XXALJ2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
am i doing it wrong ?
or should i send it to pro people ?

architect_zr said:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXALJ3_N7100OJVALJ2_N7100XXALJ2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
am i doing it wrong ?
or should i send it to pro people ?
Click to expand...
Click to collapse
You should see some more messages come up after PIT mapping..
Have you tried different firmwares? Different odin version? Used a different USB port? Try flashing CWM using odin and see if that works.

architect_zr said:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXALJ3_N7100OJVALJ2_N7100XXALJ2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
am i doing it wrong ?
or should i send it to pro people ?
Click to expand...
Click to collapse
it could be SDS .. anyways goodluck brother

architect_zr said:
so what i should do in this stage :S
Click to expand...
Click to collapse
You should calm down and stop panicking. YOU are the only one who can see YOUR phone and it's responses.
You have to describe it to us so that WE can understand your problem.
Start with Why you needed to recover it in the first place

Hopefully NOT Bricked but Unsure of What to Do

Ok, I got a new Note II the other day with 4.3 already installed via Kies or OTA. I attempted to push, via ODIN, "CF-Auto-Root-d2tmo-d2tmo-sght999.tar". I REALIZE THIS IS THE ROOT FOR S3; I KNOW I FLASHED THE WRONG FILE. PLEASE DO NOT POST SAYING I FLASHED THE WRONG FILE. I KNOW I SCREWED UP BIG TIME, AND I'M HOPING SOMEONE IS NICE ENOUGH TO TRY AND HELP ME THROUGH THIS. My laptop sat there for the better part of 2 hours acting like ODIN was cranking along but the bar never moved. After 2 hours, I had to pull the cord from the phone (stupid move, I know!), and this is, of course, where the problem began.
Now, I get the coveted "Firmware Upgrade encountered an issue. Please select recovery mode in Kies & try again." screen. The phone will, obviously, go no further than this in booting up. I am able to get to download mode.
I attempted to install JellyBean Release 4.3 (December 2013) from this thread to alleviate the issue. Here's the ODIN result:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> root66_TMO_T889UVUCMK7_2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Now, as I sit here and write this, I think installing a stock firmware like this one might not work at all. I need to install a recovery (stock or otherwise) to make this problem disappear. I tried to reinstall the CF-Auto-Root file and got this result:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-d2tmo-d2tmo-sght999.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-d2tmo-d2tmo-sght999.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Again, it didn't do anything for hours. I pulled the cord again since it didn't look like it was actually writing anything to my phone.
I don't think I can use KIES as a last resort since I never backed up the phone through KIES before. I am out of ideas, and I would really like to get this phone operational again. Also, the serial number has been removed from the device (Igot the phone from Ebay), so I don't think I could use this route either.
Any and all help would be greatly appreciated.
Thanks in advance!

Download and flash CF auto-root for sgh-t889(link below)it includes recovery, then perform factory reset by rebooting in to recovery.
http://download.chainfire.eu/266/CF-Root/CF-Auto-Root/CF-Auto-Root-t0ltetmo-t0ltetmo-sght889.zip
Sent from my SGH-T889 using xda app-developers app

[Q] GT-S6312 young duos dump ram "brick phone"

HEY
when am installing custom rom i faced a huge problem !!
dump mode and no bootloader in the device and cant go to cwm or download mode
i already tried to flash bootloader via odin but it message me :
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> boot.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Complete(Write) operation failed.
<ID:0/007> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
please help !!

I have no idea what went wrong and I think you would get better help by posting at the right forum for your device as this is the GSM Galaxy Nexus forum.

jkleo said:
I have no idea what went wrong and I think you would get better help by posting at the right forum for your device as this is the GSM Galaxy Nexus forum.
Click to expand...
Click to collapse
look at this the same problem

help no one can solve this issue??!

My phone just boots to the "Saumsung Galaxy Note II" screen and it is stuck there. I dont think its a loop because it doesnt loop (by that I mean it doesnt disappear and appear).
I m afraid using odin would erase everything.
I want to save my data, what should I do? Which rom do i use?
I tried downloading 3 to 4 note 2 roms but they all failed in odin.
Please specify what I need to download in order to save my data.
At this point, I am also ready to just give up and restore factory settings. I went to the at&t technicans, who are completely useless and they used their roms and couldnt help at all. I went to a fix phone place and they couldnt do anything either.
Please help!

Your request is ambiguous at best.
.
We have absolutely no idea what you have done beyond flashing multiple roms to the device..
I assume the device is dirty due too multiple frameworks being flashed over one another..
If it were my device...I'd go clean slate and restore the device to a stock configuration and work up from there.
.
It's a mess in there for sure.
So see the return to stock thread in the general section...and use Odin if possible....and IMHO...stay away from kies....g

i have no idea either. for all i know, none of them did anything since they all failed after this boot freeze has been happening.
im trying to go clean slate but i cant even do that.
im trying to odin with http://www.sammobile.com/firmwares/confirm/13212/I317UCAMA4_I317ATTAMA4_ATT/
but it doesnt work either!!!
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I317UCAMA4_I317ATTAMA4_578342_REV04_user _low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

downloaded both roms and both failed again
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I317UCALJ2_I317ATTALJ2_215287_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

S4 mini gt-I9195 help please

I want to put my stock firmware on my sgs4 mini gt-I9195 but when i flash with odin its says
<ID:0/020> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9195XXUCNK4_I9195QXXCOA1_I9195XXUCNK4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/020> Odin v.3 engine (ID:20)..
<ID:0/020> File analysis..
<ID:0/020> SetupConnection..
<ID:0/020> Initialzation..
<ID:0/020> Set PIT file..
<ID:0/020> DO NOT TURN OFF TARGET!!
<ID:0/020> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I cant go in recovery mode
I cant flash anything on the phone, its says this error.
P.S i flashed with pit, without pit says pit error

try to flash with this firmware mate.
https://www.androidfilehost.com/?fid=24459283995298339

I will try but, anything what i try to flash dont work, i try to flash twrp its dont work its says this error..

It failed with same error

this is multifile frimware it should not fail did u tried to select pit from file as well?

Yes, i selected pit too
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_I9195XXUCNH5_2659908_REV01_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> AP_I9195XXUCNH5_2659908_REV01_user_low_ship_MULTI_CERT_.tar.md5 is valid.
<OSM> CP_I9195XXUCNH5_2659908_REV01_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> CSC_OJV_I9195OJVCNH1_2502401_REV01_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
That's it.

xRENAMEx said:
I want to put my stock firmware on my sgs4 mini gt-I9195 but when i flash with odin its says
I cant go in recovery mode
I cant flash anything on the phone, its says this error.
P.S i flashed with pit, without pit says pit error
Click to expand...
Click to collapse
I had the sam Problem too...
It's a Hardware Problem (Motherboard)
Maybe you can buy an other used s4mini from eBay with working Motherboard and Exchange it.