NO SIM - Galaxy S 4 Mini Q&A, Help & Troubleshooting

hello guys
i have a samsung s4 mini and i had 4.2.2 with no problems.~then i updated to 4.4.2 and after that i got "no sim" message every time i start my phone.
any ideas what can be or what can i do to fix this issue?
tnks

in serviceMode i have this config at sim option:
CARD_STATE: Error
CARD_ERROR: No_Atr_Received
APP_TYPE: NONE
APP_STATE: Unknown
PERSO_STATE: Unkonown
PERSO_FEATURE: NW
PIN1_STATE: Not_Initialized
pin1_num(0). puk1_num(0)
PIN2STATE: Not_Initialized
pin2_num(0),puk2_num(0)
is this correct?

Have you tried different Sim?
Wiped data and cache?
Check if your baseband has changed, sometimes you have to flash a couple of times the firmware for the baseband to change
Try this: enter recovery do wiprs let it boot, turn off your phone (from popup menu) and start Odin mode using key combination power+home+vol down and flash again let it boot see if it changed

Related

Lenovo A806 Rom

Hello i tried experimenting with some custom roms and now my sim card is not being read at all.
I first installed this rom: http://www.needrom.com/download/lenovo-a806-multi-lang-1501_7-80-1_dev/
And everything worked correctly except that sometimes certain applications crash.
After i decided to try out another rom: http://www.needrom.com/download/lenovo-a806-miui-v6-13-language/
The second rom was working correctly but there was one problem.. The sim card was not being read.
After i had this problem i decided to go back and install the first working rom (the A806 multi lang rom) but the sim card issue still remained.
Please Help !
P.s My phone is Lenovo A806 and i reside in europe. I tried searching for the stock rom of this phone but i cannot find the stock emea rom whcih works in europe.
When you flashed one of the ROMs, your NVRam was deleted or destroyed.
You can fix this with nvram tools. Just the IMEI is missing. After entering the IMEI everything is fine again.
You can fix this with nvram tools. Just the IMEI is missing. After entering the IMEI everything is fine again.[/QUOTE]
Hi, I just read about NVram took and it only restores backed up IMEI numbers. I did not do a backup. My problem is listed below. Please help.
I bought a new Lenovo A806 (version android 4.4.2 - build VIBEUI_1432_ST_A806).
There were lots of Chinese writings imbedded in the rom and apps so I rooted the phone and tried to disable some apps and stupidly removed the stock phone dialer and contacts. Then whatever replacement app I tried from the Google play store did not work.
The replacement dialer gives me the message:- “You have removed/disabled Stock phone application, its required to properly functionality.” (pardon the Chinese English)
The phone cannot read the sim card and the IMEI number has disappeared. Following forum advice, I installed “mobileuncle” but cannot insert the IMEI number manually. When I go to Engineer mode, CDS information and try to go into Radio information, I get the message - “Unfortunately, Common Data Service has stopped.” So I cannot even go into Radio information.
I researched on the internet and tried to change the Rom. I installed the required version of TWRP recovery and after trying a few Roms, I managed to get Version VIBEUI_V2.0_1508_7.85.1_ST_A806 installed.
This version behaves better but still no IMEI number. Instead I get a different message – IMEI invalid.
When I try to call, I get this message: - “To place a call, first turn off Airplane mode”
But Airplane mode is off. But at least the dialer seems to be working and I am able to add contacts.
And I can get to radio information from mobileuncle with this version but when I type the IMEI number after the ST.., I get the message: “This command is not allowed in userbuild”
Even with a space between the ST and +, it still does not work and I get a different message, “at command is failed to send” I even rebooted after inserting the IMEI number and still no joy.
However, the wifi seems to be working on both above version and this.
I have a backup of the original corrupted rom so if anyone has a solution for either one, please help.
I installed the rom’s through TWRP recovery which is on my phone. I press volume and on/off buttons to enter into this.
I tried the NVram
Hey, I had the same issue a while back, it's actually easy.
Get imei.exe
Save it to this path: Windows C/Users/HP*
then open cmd, windows+R then type cmd
Type imei.exe followed by the imei
It'll generate a file, mpob format
Cut it from the path you pasted imei.exe
Paste it on your phone.
Get a file explorer that can access the root of the phone after granting root access.
Once you can access /device, go to this path /device/data/nvram/md5/Nvram_Imei
Then paste the mpob file there. If there's an existing one, delete it and rename the one you pasted as MPOB_001. You should only have one MPOB file there.
Now reboot.

I747 - Stock room 4.4.2 - How to unlock with paid code ?

Baseband/modem I747UCUFNJ2, stock 4.4.2 rooted. Phone from AT&T working ok with Claro Brazil (code unlocked) . After upgrading, lost IMEI. Flashed new modem and IMEI and IMEISV ok now. Checked IMEI number, is the same printed behind battery on phone. But now can not make calls. Got message 'No SIM card'. Ordered a Sim card tray, replaced it, but got same message. Phone has strong carrier signal. After reading a lot, I ordered a paid unlock code, but seller stated that code doesnt work in android 4.2.2. Even though, I tried to insert it once. (#@7465625*638*# - have to use it since phone doesnt ask for code at starting). As stated by seller, got message 'unlocked unsucessfull'. So now, what can I do to unlock the fone ? I have access to a hiden menu by dialing *#197328640# , but dont know how to use it. I have read a lot during this week. Did no find any helpfull information. Any help will be apreciated. Sorry for my bad english.
Sounds like the baseband and bootloader and too new for the ROM. You probably need to upgrade from stock 4.2.2 to stock 4.4.2 or flash a custom ROM based on a TW-kernel.
I edited/corrected my wrong information. The phone is on 4.4.2 stock already.
Try this:
Method 1:
Go to the dial screen and press #7465625*638*#
Once prompted for code, enter 8 digit Unlock Code.
Method 2:
Turn off your Samsung phone
Insert a non-accepted sim card (different from the original carrier) and turn your phone back on.
When prompted for the unlock code type the UNFREEZE code provided. If you are not prompted, go to your dial screen and type the UNFREEZE code, now press enter, send or call. You will receive an unsuccesfull message, don't worry.
Once the phone freeze is disabled, the Network lock or SP Lock screen will appear
For Network lock enter the UNLOCK code provided. For SP Lock enter the SERVICE PROVIDER code
Your phone is now fully unlocked!
If you get "unsuccessful" again then hit Dismiss button and type *2767*3855# on phone keypad and try this procedure again (CAUTION! This will reformat all your data!).
Method 3:
You can try this method without the sim card or with the original sim card
Type #7465625*638*CODE# (CODE is the Unlock Code)
Phone deactivated message means its unlocked

after update - systemUI stopped - how to get data off

HTC one m9
Andriod system update...
phone boots straight away message box appears "system ui has stopped unexpectedly. would you like to send an error report to htc...."
Press either options send or don't send phone then flickers between an almost "scenery photo"
I cant enter my passcode to access data via pc
Already tried deleting cache but no changes
I think my next option is to factory reset but i need my data off before...
is there a way? please help
Is tour phone rooted? If it is try to dirty flash your rom again

Unable to use simcard unknown imei phone number custom rom

Hello,
I was using for 3 years this rom https://forum.xda-developers.com/optimus-g-pro/development/mar-0-lollipop-g-pro-v1-t3043779
Yet after deleting some photos, clearing cache of bluetooth (in apps section because it gave me "unfortunately bluetooth has stopped) & restarting phone I couldn't insert the pin.
So flashed stock rom = yeah it works.
Then decided to clean install same rom I been using for years mentioned above https://forum.xda-developers.com/optimus-g-pro/development/mar-0-lollipop-g-pro-v1-t3043779
It showed my imei but the moment I insert the simcard it still didn't let me write PIN & imei + phone number went to "unknown".
ps. also the moment I turn it off at the end, my phone gives sound of mouth chucking lol wtf
Help welp....

(Help) Radio power off, cant get it on.

Hello,
My phone can not find any network. Phone recognizes the SIM, when i try to select manual 4g/3g/2g phone does not find any signal. Wifi and bluetooth working.
When i look in "phone information" Mobile radio power is off and preferred network type is wrong. I cant get it on and i cant select the true network type.
I did flash modem.img again and again.. I don't get what is the problem.
Before that, i broke the partitions as 45/46/47 and /vendor, after i recover these, Phone works fine but i face the this dead end problem..
I tried these;
Flashing AOSP, same.
Flashing (same model RN5) modem.img
I did flash the global rom a few times
Reset tens of times..
How can i solve this problem ? can anyone help please ?
i.hizliresim.com/lqkNbp.png

Categories

Resources