Related
Ok, will give you as much detail as I can, hopefully someone can help.
My Desire is suffering from the rebooting constantly problem. Now, I have to send it back to T-Mobile so I though before I done so, I should put the correct Rom on it.
I downloaded all the T-Mob ones I could find, and not of them worked, two were the wrong bootloader version and two just had errors on start up.
Bootloader 0.83.0001 btw.
Anyway, not sure what has happened next but now when I try to turn my Desire on it just hangs on the white HTC start up screen. So i tried Power + Vol down to go into recovery and it does the same, stick on the white HTC screen.
I have taken the SD card out to try this and it has no effect, it's the same as the above.
At a loss now as to what to do, is the phone totally broke or is there some way that I can recover it?
Any help muchly appreciated.
Edit - Is there a way of flashing the RUU directly to the phone to make it run on start up? OR am I talking gibberish?
Dudditz said:
Ok, will give you as much detail as I can, hopefully someone can help.
My Desire is suffering from the rebooting constantly problem. Now, I have to send it back to T-Mobile so I though before I done so, I should put the correct Rom on it.
I downloaded all the T-Mob ones I could find, and not of them worked, two were the wrong bootloader version and two just had errors on start up.
Bootloader 0.83.0001 btw.
Anyway, not sure what has happened next but now when I try to turn my Desire on it just hangs on the white HTC start up screen. So i tried Power + Vol down to go into recovery and it does the same, stick on the white HTC screen.
I have taken the SD card out to try this and it has no effect, it's the same as the above.
At a loss now as to what to do, is the phone totally broke or is there some way that I can recover it?
Any help muchly appreciated.
Edit - Is there a way of flashing the RUU directly to the phone to make it run on start up? OR am I talking gibberish?
Click to expand...
Click to collapse
did you HOLD DOWN(right way) the Vol Down + Power untill the fastboot screen appears or did you just press it?
Held it down and got into the bootloader screen, can see all the options but picking recovery just send me to the white HTC screen where it then sticks.
Dudditz said:
Held it down and got into the bootloader screen, can see all the options but picking recovery just send me to the white HTC screen where it then sticks.
Click to expand...
Click to collapse
Hmm maybe recovery is corrupted, there is a way of flashing using fastboot but i dont know how to do it, perhaps someone else can help you with fastboot mode
Swyped from my HTC Desire using XDA Premium App
Dudditz said:
I downloaded all the T-Mob ones I could find, and not of them worked, two were the wrong bootloader version and two just had errors on start up.
Click to expand...
Click to collapse
Sorry that I can't help you with the bootloader issue, but just a quick note for your future reference when you (hopefully) get the bootloader sorted: Bear in mind that there's a big difference between t-mobile in the UK and in the US. It's possible that you've downloaded and flashed a US-based t-mobile ROM which has made the phone unstable.
As far as I know, UK-based t-mobile handsets operate on the 900/1800/2100 MHz bands. In the US, t-mobile runs on 1700/1900/2100 MHz bands, so the ROM you've loaded may not actually be compatible with your hardware. This may or may not help you solve the problem / avoid it in future.
Good luck!
If u can get into bootloader n fastboot try n make a gold card n flash a ruu that way.
If even try using unrevoked again n c how far u get
Device HTC Desire
Rom RcmMixSv08
SD class 4 6.40gb fat32 / 1gb ext3
S OFF
Radio 5.11.05.14
Hboot 0.93.1000
custom hboot Alpharev Cm7
Recovery Alpharev Cmw 2.5.1.8
Fake Flash Cwm 3.0.0.5
IM thinking that flashing the ruu will sove all ur problems so no need to it send back
Sent from my HTC Desire using XDA Premium App
I think u have to unroot ur device first. This hapens to me before n I just do the step i give u down. It will help u but u have to get the correct ruu file for ur device
1. Reboot your HTC Desire into bootloader mode by turning the phone off then pressing the power button while holding down the volume down button.
2. Select “Fastboot” and hit power button.
3. Connect your HTC Desire to your computer and make sure “Fastboot USB” comes on the HTC Desire.
4. Just download the RUU file and run.
Thats it u r now unrooted ur device should start up as like u first turn it on. Sorry for the bad english.
i would recommend flashing a new recovery first via fastboot before trying RUU (though it is a good suggestion as well). If you can get to fastboot, you just need to download whatever recovery image you use, connect your phone via usb and use:
fastboot flash recovery C:\wherever_you_put_it\wahtever_image.img
Recovery can become corrupt too just like anything else on the phone..
Hi all,
I think I killed my desire. It was on three network and I managed to root it and installed Oxygen. I used the phone for about one week before I started having withdrawal symptoms in hot having the sense UI. Okay call me whatever you like but I like that UI.
Now for the problem…. I wanted to put a stock rom on it again and read a lot before doing that.
Downloaded an unbranded RUU that didn’t want to load because of the Customer ID being wrong. Read a bit more and found that I had to go back to the three ROM instead. Okay downloaded that and all seemed fine the phone was being flashed. After a minute or so the process stopped with an error message that something wasn’t right with the bootloader.
Not being able to find anything related to this kind of problem I ended up taking the battery of the phone and now all is black. I cannot get anything to work on it. Nothing happens when I hold down the volume – key plus power.
My PC still sees the phone as My Android in the device manager.
When removing the battery and putting it back in and pressing the power button the phone vibrates but nothing else. Not even the LED is lit when connected to the PC via USB cable.
Is this a lost case?
Please help
Regards
PS I have tried all mentioned on this post but I cannot the adb command to find my device
http://forum.xda-developers.com/showthread.php?t=831734
Did u flash a different hboot and is it s-off
Sent from my HTC Desire using XDA App
A similar thing happened with an x10mini had. All I did was fromwhere you are now,black screen etc, was flash the ruu and now my GF uses that phone good luck.
Sent from my HTC Desire using XDA Premium App
Hi yes it was S-off as I had to put it in that state otherwise I couldn't flash Oxygen it would let me.
About different Hboot I have no idea, The problem is that I cannot get anything out of the phone. maybe I'm doing something wrong? The phone now as I left the battery out the whole night it started charging again. well... the orange light comes on when connecting it to the PC, but screen still all dark, but as soon as I press the power-on button it's gone and stays off.
copernicus666 said:
A similar thing happened with an x10mini had. All I did was fromwhere you are now,black screen etc, was flash the ruu and now my GF uses that phone good luck.
Sent from my HTC Desire using XDA Premium App
Click to expand...
Click to collapse
Hi that's good news but how did you flash the phone in that state? everytime I try the RUU exe doesn't find the phone. And yes I still have a goldcard for this phone if that's of any help?
If you've got a goldcard, try flashing the WWE RUU in fastboot mode.
The RUU you want is 2.29.405.2 or 2.29.405.5.
To get into fastboot - power and back key.
EDIT - which RUU have you tried? Sounds like it was a very old one.
Sent from my HTC Desire using Tapatalk
Hi thanks for your reply
RUU_Bravo_H3G_UK_1.20.771.3_Radio_32.36.00.28U_4.0 6.00.02_2_release_124822.exe
RUU_Bravo_H3G_UK_1.22.771.1_Radio_32.36.00.28U_4.0 6.00.02_2_release_127568_signed.exe
one of these two. But my fear is that it hasn't finished to flash it till the end or if it did I had that error message.
Ho do I know that it is in that mode? is there anything or the PC I can through at it to acknowledge that mode?
Or is it only when I trying to flash the RUU?
When you are in fastboot mode, you have a white screen with three androids at the bottom. Beside some other informations you should see the word "FASTBOOT" in red highlighted letters.
Why did you posted these two old ruus? Is h3g your provider? The latest ruu by htc can be downloaded here:
http://shipped-roms.com/download.ph...9.00.32U_5.11.05.27_release_159811_signed.exe
Download this ruu, boot your phone into fastboot mode and connect your phone to your computer. Instead of "FASTBOOT" you should see "FASTBOOT USB". Then run the downloaded ruu on your computer and follow the instrucions.
yep just tried it again.
I start the RUU exe the later of the two you recommended and it doesn't find the phone error 170.
Still no joy. nevertheless the PC does do the usual sound when a USB device is connected as soon as I press the power and back button.
MatDrOiD said:
When you are in fastboot mode, you have a white screen with three androids at the bottom. Beside some other informations you should see the word "FASTBOOT" in red highlighted letters.
Why did you posted these two old ruus? Is h3g your provider? The latest ruu by htc can be downloaded here:
http://shipped-roms.com/download.ph...9.00.32U_5.11.05.27_release_159811_signed.exe
Download this ruu, boot your phone into fastboot mode and connect your phone to your computer. Instead of "FASTBOOT" you should see "FASTBOOT USB". Then run the downloaded ruu on your computer and follow the instrucions.
Click to expand...
Click to collapse
sorry mate I don't think you understood my situation! I don't see anything on my screen. it is all black!!!
the two RUUs I posted are the ones I found for the 3 network that's what I thought these were? I have the latest RUU but it doesn't find the phone.
ervidel said:
yep just tried it again.
I start the RUU exe the later of the two you recommended and it doesn't find the phone error 170.
Still no joy. nevertheless the PC does do the usual sound when a USB device is connected as soon as I press the power and back button.
Click to expand...
Click to collapse
Installed all drivers correctly:
http://unrevoked.com/rootwiki/doku.php/public/windows_hboot_driver_install
Is htc sync installed?
If yes, uninstall ONLY htc sync software (NOT the drivers).
Now reboot your computer.
If not, install it. Then follow the steps for "if yes,...".
After rebooting is finished, try to flash the ruu again.
thanks again trying it now....
hummm still nothing this is what I do
- remove the battery
- unplug the SUB cable
- I already had those drivers installed. My device manager shows under the Android Phone: Android bootloader interface (is this what I should have?)
- put the battery back in and plug the cable
- press the back button and whilst that press the power-on until windows goes ding-dong....
- run the RUU and tick the boxes and hit next twice and the RUU launches adb.exe (I can see this in the windows task manager...
- the RUU exe eventually gives up
any mistakes?
EDIT I uninstalled HTC sync as recommended but not HTC BMP USB Driver and not HTC Driver Installer
if I do fastboot devices from the command line it odesn't find my desire. on the other hand if I put my wife's in fastboot the fastboot command does find it. I guess there is everything fine with the drivers and software on my PC. it must be the phone that has been left in a state that is unrecoverable. Any further tips or tricks or should I just for get about and and sell it as for spares?
if I follow the fastboot screen on my wife's Desire and press the volume rocker to go to recovery and press the power button the phone vibrates and the PC shows it as My HTC instead of the Android Bootloader interface. it looks like in the back ground is all there but why isn't the phone recognised?
Not sure if this means anything or can help but as I put the phone into recovery mode ADB can now see it. doing adb devices I can see an alphanumerical value followed by recovery
what can I do from here?running the RUU rom does still not do anything in this mode.
Sounds to me like you may have SLCD brick, is your desire slcd?
As above. It seems like you've flashed an old ruu for an amoled phone.
Try flashing the WWE RUU using the PB99IMG.zip method perhaps. A quick search should find some posts about what to do
Sent from my HTC Desire using Tapatalk
mikep99 said:
As above. It seems like you've flashed an old ruu for an amoled phone.
Try flashing the WWE RUU using the PB99IMG.zip method perhaps. A quick search should find some posts about what to do
Sent from my HTC Desire using Tapatalk
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=10509780&postcount=102
Hi Chaps
I'm still confused. okay I extracted the rom and renamed it. I did this from the RUU that wasn't my original one. I guess this is still wrong right? But having the PB99IMG.zip file on the goldcard root should do the trick or does this only work with the original RUU ROM? I have downloaded RUU_Bravo_Froyo_H3G_UK_2.25.771.1_Radio_32.48.00.32U_5.11.05.14_release_149217_signed
should I use this ROM instead?
and how to I flash the phone now? Please remember that I cannot see anything on screen.
Do I hold down vol down and press power? do I need to do anything else?
what is the exact sequence of buttons as I cannot see what I'm doing.
Does the battery also need to be above a certain charge for this to work? again I wouldn't see any error messages!
thanks
Good day everyone!
Explanation fell free to skip...
So I have my HTC Desire HD, fully rooted, with Eng-S OFF, Radio OFF, the 1.1.1.1 and all that.
After 2 days running coredroid v.8 phone went crazy and started rebooting (I suspect it was the launchpro app).
I did a full wipe and went to reflash the room but it was not working.
So I tried downgrading again but here's the problem:
Real Problem
Everytime I try to enter the bootloader the
"SD Checking Screen" comes up "Loading...[PD98IMG.zip]"
But my my PD98IMG.zip for some reason is corrupt.
If I choose yes to update SD Zip it fails on step "[4]- Fail-UZ". The rest is ok and in the end syas "Update Fail" Press power to reboot.
The damn thing is that when I reboot this cycle starts again and again! (sd checking....loading...)
If I choose not to update I Still have to reboot which leads me back to the cycle!
Please might community! Tell me how to solve this!
I dont have anywhere else where I could mount my SD Card..
Is there any way to cancel the commands that pushes the HTC to update the zip?
Problem is that the phone is not found on command prompt when this booting begins.
Any ideas??
Best regards everyone,
Joao LUiz
I had the same problem with coredroid v7.1,phone booting,enter my pin and the restart after restart.....but taking out the battery solved my problem
Jocaluiz said:
Good day everyone!
Explanation fell free to skip...
So I have my HTC Desire HD, fully rooted, with Eng-S OFF, Radio OFF, the 1.1.1.1 and all that.
After 2 days running coredroid v.8 phone went crazy and started rebooting (I suspect it was the launchpro app).
I did a full wipe and went to reflash the room but it was not working.
So I tried downgrading again but here's the problem:
Real Problem
Everytime I try to enter the bootloader the
"SD Checking Screen" comes up "Loading...[PD98IMG.zip]"
But my my PD98IMG.zip for some reason is corrupt.
If I choose yes to update SD Zip it fails on step "[4]- Fail-UZ". The rest is ok and in the end syas "Update Fail" Press power to reboot.
The damn thing is that when I reboot this cycle starts again and again! (sd checking....loading...)
If I choose not to update I Still have to reboot which leads me back to the cycle!
Please might community! Tell me how to solve this!
I dont have anywhere else where I could mount my SD Card..
Is there any way to cancel the commands that pushes the HTC to update the zip?
Problem is that the phone is not found on command prompt when this booting begins.
Any ideas??
Best regards everyone,
Joao LUiz
Click to expand...
Click to collapse
1. Take out your battery.
2. Take out memory card.
3. Put back battery and boot into bootloader. And choose recovery.
4. Put back your memory card.
5. You can do whatever you need to do.
Some advice, move your PD98IMG file to other directory when not used. Don't put at root folder.
Edit: Why are you putting PD98IMG.zip for?
Sent from my Desire HD using Tapatalk
Update 10/09/2011
Went and bought an Microsd usb adapter. Plugged the MicroSD, formated, changed the PD98IMG. zip for a new one.
Plugged in the phone the update went through fine. However when I rebooted only got HTC white screen.
I removed the battery to make it reboot again, now in bootloader. And guess?
The freakin thing is asking for the update again!!! God damn it!
As I see it my phone is with a command that keeps telling it to boot the image. Any ideais on how do I cancel this command?
darren91teo said:
1. Take out your battery.
2. Take out memory card.
3. Put back battery and boot into bootloader. And choose recovery.
4. Put back your memory card.
5. You can do whatever you need to do.
Some advice, move your PD98IMG file to other directory when not used. Don't put at root folder.
Edit: Why are you putting PD98IMG.zip for?
Sent from my Desire HD using Tapatalk
Click to expand...
Click to collapse
Thanks for the reply darren.
I was trying to run PD98img just to see if it would stop asking for updates.
I did as you suggested but now when I click Recovery I get a black screen with an HTC on it and a red exclamation point inside a triangle.
Before I was getting a SYNC sign like it was looking for my SD card. The sd is running fine on the adapter...oh well...
So, You restored your DHD using a PD98IMG and now after restoration your stuck either at the bootloader or at the white screen with the green HTC logo?
Firstly what PD98IMG did you flash? 1.32.405.6, 1.72.405.6, 2.32.405.6 or other?
Secondly, can you access the stock recovery menu and attempt a factory reset from there? - Remove & reinsert battery, hold Vol Down + Power. You should get a plain menu in blue if I recall with 2-3 options. One should be factory reset/restore. Use volume to navigate & power to enter.
andyharney said:
So, You restored your DHD using a PD98IMG and now after restoration your stuck either at the bootloader or at the white screen with the green HTC logo?
Firstly what PD98IMG did you flash? 1.32.405.6, 1.72.405.6, 2.32.405.6 or other?
Secondly, can you access the stock recovery menu and attempt a factory reset from there? - Remove & reinsert battery, hold Vol Down + Power. You should get a plain menu in blue if I recall with 2-3 options. One should be factory reset/restore. Use volume to navigate & power to enter.
Click to expand...
Click to collapse
Andy,
Yep my phone updated on PD98IMG and now I'm stuck at bootloader or the white with green logo!
The PD98IMG was 1.32 from this topic http://forum.xda-developers.com/showthread.php?t=905003
I did as you suggested. Clicked factory wipe, it took me to a black screen with the htc phone on it + a big green syncing symbol and at the bottom a meter bar with a MicroSD card logo to the right of it.
It went black after a short time , then the device rebooted back to HTC white screen.
Does it mean it worked? Could it be my SD card ?
Again thank you all for the replies,
I'm going crazy over here!
Plus
Now on bootloader screen it says Hboot USB Plug.
But when I go cmd and type adb shell it says error device not found.
If I try to go into recovery I get the Black screen with red triangle and exclamation point.
Is your phone still eng s-off? By right, flashing PD98IMG will revert it to s-on..
Sent from my Desire HD using Tapatalk
darren91teo said:
Is your phone still eng s-off? By right, flashing PD98IMG will revert it to s-on..
Sent from my Desire HD using Tapatalk
Click to expand...
Click to collapse
Oh great! Now how will I be able to make it S-OFF?
At the bootloader screen it says Ship S-Off.
I was reading at ohter places, apparently I have reverted my recovery to the original.
I need to be able to flash a custom recovery onto the phone. I saw some people used Unrevoked but I pretty sure the software only works on some mobiles and HTC Desire HD is not on the list. Unless HTC Desire CDMA means the Desire HD
http://unrevoked.com/rootwiki/doku.php/public/unrevoked3
What happens when you leave the device to boot normally? Usually the first boot can take upto 5 minutes.
I'm guessing you have already waited that long and that will not be a solution.
IF, and that's a big if, please mind the pun, you still have ENG S-OFF you attempt a fastboot restore. But you do need ENG S-OFF.
EDIT: Ah SHIP S-OFF does no have access to fastboot commands.
Jocaluiz said:
Oh great! Now how will I be able to make it S-OFF?
At the bootloader screen it says Ship S-Off.
I was reading at ohter places, apparently I have reverted my recovery to the original.
I need to be able to flash a custom recovery onto the phone. I saw some people used Unrevoked but I pretty sure the software only works on some mobiles and HTC Desire HD is not on the list. Unless HTC Desire CDMA means the Desire HD
http://unrevoked.com/rootwiki/doku.php/public/unrevoked3
Click to expand...
Click to collapse
It's different and I don't know whether it works with dhd or not. Try re-download the PD98IMG and try flash again.
Edit: Found this.
Sent from my Desire HD using Tapatalk
darren91teo said:
It's different and I don't know whether it works with dhd or not. Try re-download the PD98IMG and try flash again.
Edit: Found this.
Sent from my Desire HD using Tapatalk
Click to expand...
Click to collapse
Darren,
Thank you!
Update 11/09/2011
I'm able to go to recovery mod. Have wiped both data and cache.
If I run cmd "adb devices" it shows my phone serial number + offline. Also on recovery mod the phone drivers are recognized on windows device manager.
However if I stay on the initial bootloader screen and run "adb devices" it shows no device and the drivers dont recognize my phone.
On the usb devices only shows Android 1.0.
I'm trying to get my phone online so I can run the temp root cmd commands. But it's either offline on recovery or not recognized at all on Bootloader screen. ¬¬"
Since you have cwm recovery, just full wipe and flash a custom ROM on it.
Sent from my Desire HD using Tapatalk
I've tried everytyhing. Flashing Clowork Mod Recovery, updating from update.zip as well clicking on the bat file.
Everywhere I get permission denied, seems like my phone is not letting me do anything. Maybe my goldcard got corrupted in the mess. I'll make a new goldcard and see how it goes.
Ah as well I've noticed this
The reason this all started was because my HTC was in a bootloop. It would load Coredroid, the initial screen would appear then it would reboot and so on.
Now even with no rooms, no sd card etc. If I leave it to boot normally, the HTC White screen will stay on then it will reboot (goes black, phone vibrates) to the same HTC white screen.
So I think it's got something hardware related, I mean it's rebooting even with no rooms.
Oh geez....
Again, thank you all very much for the support! It's been really helpful, thank you for the ideas guys!
How do you full wipe?
Manually or using script?
If using manual method, what are the steps you did?
darren91teo said:
How do you full wipe?
Manually or using script?
If using manual method, what are the steps you did?
Click to expand...
Click to collapse
Darren,
I went to Bootloader > Recovery > Wipe Data. Then I wiped cache as well. Note that my Recovery access is limited. It says Android system recovery 3e. And in yellow at the bottom E:Can't open /cache/recovery/command.
I also did Factory Reset from the Bootloader Screen.
I can't do any script stuff except for Fastboot commands. Even on that I get "failed" status due to my permission denied.
I really cant understand why I cannot seem to flash a new Recovery.
If I use update.zip I get a failed installation at the end.
If I use clockword mod double click on the bat file the process runs, phone reboots like it should and then nothing, still on 3e...
Did you do what this post suggested?
Download the PD98IMG_cwmrecovery.zip file and rename it to PD98IMG.zip. Put it at root and boot in hboot and update.
darren91teo said:
Did you do what this post suggested?
Download the PD98IMG_cwmrecovery.zip file and rename it to PD98IMG.zip. Put it at root and boot in hboot and update.
Click to expand...
Click to collapse
Will try this right away, sir!!!
Fingers crossed!
Hi!
First off, I've been searching for the answer all afternoon, but with no luck.
Here's the thing. My GF borrowed my friends old Desire, because her Legend broke.
When we tried to boot it up, it was stuck at the white HTC screen. So i entered Hboot and tried to use recovery with no luck. Recovery was also stuck at white screen.
My friend had removed his SD card before we borrowed the phone. Could that be the problem? Both me and my friend are pretty new to rooting/flashing. All the info he could give me, was that he was running some Modaco rom, and had used Unrevoked to root the phone.
I tried to download a Modaco rom and rename it PB99IMG.ZIP and putting it at the root of our own SD card. No luck.
Then i tried to put the update.zip (CWM file) with the hope that I could then load recovery. Also no luck.
Also tried to plug in USB cable, so that I could maybe wipe phone and install a new RUU. USB was recognized in Hboot (HBOOT USB PLUG status), but no access gained on the computer. I have manually installed drivers.
My friend lives a bit far away. So is there a way I can solve this without his SD card?
Thanks in advance!
- Rasmus, Denmark
Please send the bootloader info.
Sent from my customized HTC Desire using TTP
when you run a RUU bot into FASTBOOT USB. Turn it off and then hold BACK and POWER. then run the RUU.
need more help check my guide.
davebugyi > I hope this is the info you need :
BRAVO PVT1 SHIP S-ON
HBOOT-0.93.0001
MICROP-031d
TOUCH PANEL-SYNT0101
RADIO-5.10.05.23
Aug 10 2010, 17:52.18
bortak> Awesome guide, will check it out right away!
Okay, so now i followed bortaks guide. Created a gold card, downloaded latest recommended RUU, and then ran it while connected with fastboot usb.
At first i had problems when the RUU rebooted the bootloader. The phone shut down and disconnected instead of rebooting. Tried a few times, and finally got the installation to move on by keeping the phone "alive" through pressing vol buttons -although with a black screen.
But by 29%, while updating radio, the installation froze. After some time i unplugged USB and let the installation fail. So now I'm stuck with the four triangles with exclamation marks. I can run the RUU again and again, but it keeps freezing at various stages of installation.
What to do? It's not bricked, so there must be hope?
Can I take a different approach? Through ADB perhaps?
Thanks again!
RUU installation keeps freezing on my pc! Tried to click vol button to perhaps keep the phone "alive", but then I got error 155
Can't seem to find anything on Google about RUU installs that freezes - do any of you know what to do? Can't I use ADB or anything to flash the ROM?
evilution.dk said:
Okay, so now i followed bortaks guide. Created a gold card, downloaded latest recommended RUU, and then ran it while connected with fastboot usb.
At first i had problems when the RUU rebooted the bootloader. The phone shut down and disconnected instead of rebooting. Tried a few times, and finally got the installation to move on by keeping the phone "alive" through pressing vol buttons -although with a black screen.
But by 29%, while updating radio, the installation froze. After some time i unplugged USB and let the installation fail. So now I'm stuck with the four triangles with exclamation marks. I can run the RUU again and again, but it keeps freezing at various stages of installation.
What to do? It's not bricked, so there must be hope?
Can I take a different approach? Through ADB perhaps?
Thanks again!
Click to expand...
Click to collapse
oooh dear you shouldnt have disconnected it whist it was updating the radio.
i fear you may now have a radio brick
So I can have bricked the radio - but the phone will still respond?
evilution.dk said:
So I can have bricked the radio - but the phone will still respond?
Click to expand...
Click to collapse
unfortunately yes, if you unplug the phone and turn it on, it should boot in RUU mode, at what point does it say FAIL! ?
if it is on the radio, then I'm afraid it's bricked.. if you managed to luck out somehow and it isn't, then you could try again.
When i turn it on, the black splash screen with exclamation marks comes on. If i try to turn it on with usb cable plugged in while running XP mode on virtual machine, i see the white screen with version informations. But it only says RUU with an orange background.
Tried to install the new Gingerbread RUU from the HTC hp, but it still freezes. Think I'm out of luck
hmm... stick your phone in the freezer (in a plastic bag) for 5-10 minutes then try again.
I know it may sound strange.. but it may be overheating or something.
Whoever you borrowed this from will not be happy haha
Sent from my HTC Desire using XDA App
Which RUU are you trying to install?
I had the same issue when I realised I was trying to install a 2.1 RUU on my desire which was a bit silly, I had identical problems. used the correct 2.2 RUU and all ok
voodooboy3000 - Was trying to install official 2.3 Gingerbread RUU.
elliottg61 - It was crashing all the time when he had it, so he said i could have it if I could fix it. I couldn't
I would give the original firmware a go and get it back to stock. was it originally locked to a specific provider? if not use this RUU
http://forum.xda-developers.com/showthread.php?t=869048
Your not even s-off. How did he use anything to root. Granted my experience is with the bravoC. The GSM I'm sure is different. I would find the newest ruu available and try to flash that from hboot. If it takes forever go away. Don't touch it. Don't unplug it. Don't do anything till its done. If it wont flash after 30 minutes your screwed I think. U can try it over again. But if u have an official ruu it should flash no problem. If it gonna flash.
Try flashing a shooter port on the og evo, or flash a rom on the shooter. It can seem to hang on you for a while but it just takes time.
Edit: try this just rename it and stick on root of SD card and boot phone with volume down and power and then leave it be.
http://www.filefactory.com/file/b4a4027/n/RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed.exe
Sent from my PG86100 using XDA Premium App
evilution.dk said:
voodooboy3000 - Was trying to install official 2.3 Gingerbread RUU.
elliottg61 - It was crashing all the time when he had it, so he said i could have it if I could fix it. I couldn't
Click to expand...
Click to collapse
hahahahaha! gave you your first thanks because that made me laugh
Your phone is said to be bricked when you screw up with your radio partition of your phone. This contains the bootloader which loads the operating system. This is a hard brick and needs expensive hardware to fix. I can only help you with a soft brick.
benjamingwynn said:
Most people seen to not know the difference between a soft brick, a boot failure and a total brick.
Boot failure: commonly referred to as 'the HTC screen', 'the white screen' and of cause the 'help me my phone is stuck - problem'. This problem can be caused by many things, including the kernel, library's and ramdisk (think of a ramdisk like a map of your phones internal hardware). This can easily be resolved by flashing a new ROM.
Soft brick: Is where your phone gives out no screen output, but does give out some vibrations or you can access the bootloader utility/hboot, this can be fixed by flashing an RUU
Brick: your phone is as useless as a brick. It does not turn on nor make any vibrations, and you can not access the bootloader utility. There is no way to fix this.
Here's some ways to avoid soft bricking/bricking:
- Don't flash unofficial radio firmware
- Don't flash unofficial hboot software
- Don't throw your phone
- Don't flash anything suspicious in hboot
- Don't flash an RUU not designed for your phone
Here's some common misunderstandings:
- Roms, on there own will never brick your phone
- Kernels will never brick your phone
- The bootloader is not the radio
- Too many flashes will not brick your phone (however, you may make the internal memory smaller by KB because of bad sectors, but that story is for another time )
Sent from my HTC Wildfire S A510e using xda premium
Click to expand...
Click to collapse
Thanks to benjamingwynn for the above info. Original post
It is a good practice to keep at least 3 nandroid backups on your sd card or computer. Also, making a goldcard is also necessary to run an RUU and to flash a PG76IMG.zip these things make it easier to unbrick your phone
Install ADB and Fastboot here first.
A Soft brick may be of many types.
The 3/5/7 vibe Brick (common with A510c)
This is Qualcomm Diagnostics mode.
--> How To Fix It (Click here)
You have to use a PG76IMG.zip extracted from your RUU, and not the file given in that post.
kalaker said:
To extract from the RUU,
Launch RUU (For this to be easiest, close all other running applications)
At the screen for the README, launch Windows Explorer
In the navigation/address bar type "%TEMP%" without the quotes.
Choose the first long-named folder (actually, the most recent) and open it.
Follow folders until you get to where there is a whole, big list (it should only be 1 or 2 subfolders).
Look for ROM.zip
Drag to desktop
Rename to PG76IMG.zip
Put it on SD Card.
Click to expand...
Click to collapse
Phone doesn't boot but goes to recovery saying something like E:/ Invalid command argument
Your boot partition is messed up
-->How to fix it
-Flash your ROM again
or
-Flash another ROM
or
-Restore a nandroid backup.
If that didn't work,
-Extract the boot.img from your ROM zip and and copy it where ADB and Fastboot are.
-boot into your bootloader [wait 15 sec] select 'fastboot' and press power.
-type
Code:
fastboot flash boot boot.img
Reboot
Stuck on splash screen (White backgound with green 'htc')
Wait for at least 20 minutes to be sure its really stuck.
--> How to fix it
-remove the battery, boot into recovery, Wipe Data/Factory reset and try again
-still doesn't boot?
Restore a nandroid backup/Flash another Rom
Bootloop (Bootanimation plays repeatedly)
Connect the phone to your computer, run a logcat using the
Code:
adb logcat
command and look for repeating blocks
--> How to fix it
-remove the battery, boot into recovery, Wipe Data/Factory reset and try again
-still doesn't boot?
Restore a nandroid backup/Flash another Rom
Dont forget to click the Thanks button!!
Please leave your feedback/comments/corrections
Inform me if something is wrong and i will fix it
HI I have a 3 vibe brick on my CDMA VM USA HTC Wildfire S. It started with phone restarting and so I tried to recover though CWMod recovery, as I had backed it up when I first rooted my phone. During recovery it failed. I rebooted my phone then was stuck on the splash screen, after that I tried a battery pull and wound up with the 3 vibe brick. I have tried this method 4 times now, nothing seems to change, 3 vibes on power + vol down, wait 5 min, press vol up, wait 5 min again press vol up, no vibe, no nothing. screen stays black, no other vibes, do a battery pull, start over, same thing again. Any suggestions would be greatly appreciated cause I have no backup phone at the moment.
I'm sorry that's my mistake you have to do that with a PG76IMG.zip, not pb31img. Extract it from the ruu of your carrier and then follow the procedure
Sent from my HTC Wildfire S A510e
Ok cool. I was kinda thinking that's what it was, cause every time I was in hboot before this happened that's what it looked for, but I wasn't sure. Not really familiar with android but learning. Thanks again, btw, it works and you rock.
fr33kachu said:
Ok cool. I was kinda thinking that's what it was, cause every time I was in hboot before this happened that's what it looked for, but I wasn't sure. Not really familiar with android but learning. Thanks again, btw, it works and you rock.
Click to expand...
Click to collapse
So you're unbricked now? Could you post the PG76IMG for other users?
usb connection
Hi, really good tutorial bud, mine is stuck on 7 or five vibe seems random at the moment...transffered zip to sd but I think my battery is dead and does not seem to charge on charger and laptop not recognising usb connection (though red led comes on....do I need to find alternative way to charge battery ? Also if in diagnostics mode would this show in device manager... as I am guessing if it does not that means I aint so phone is truly bricked...
Thanks ahead
Ben
So did you try the method shown?
thank you mate! really help for us keep sharing!
Sent from my HTC Wildfire S A510e using Tapatalk 2
hard brick?
Hey all.
I recently purchased a Wildfire S(no simlock, no branding) from ebay. The touchscreen was responding very randomly so (without giving it too much thought, sigh) I decided to flash it. I'm in Germany so I used "RUU_Marvel_S_HTC_Europe_2.13.401.3_Radio_47.23c.35.3037_7.54.39.28M_release_236989_signed.exe"
I don't know what I did wrong but now I seem to have a bricked phone. When powered on it displays nothing, it doesn't vibrate and it is not recognizes by Windows when connected via USB, it doesn't even show up in the Device Manager as some sort of device. The display keeps turning on and off every 2,3 seconds regardless if I turn the phone on or i just plug in the battery so now it sits with no battery waiting to be salvaged.
Can you confirm that I have a hard bricked phone? I've read that it is possible to unbrick the HTC Sensation by putting it in QDL mode.
Can this be done with the Wildfire S? I saw two little holes near the upper right corner of the battery.
If it is absolutely impossible for the Wildfire S, can you recommend a place in Munich where I could get my phone fixed? What's a reasonable price so I don't get ripped off?
Thank you all! I hope I've posted in the right forum. Should I open a new thread for this?
Ciao.
Did you unlock your bootloader? If not, you can claim your warranty
vbhtt said:
Did you unlock your bootloader? If not, you can claim your warranty
Click to expand...
Click to collapse
I've got it from ebay, so I don't have any receipt, just the phone. Also didn't bother to check that before bricking it.
vbhtt said:
So did you try the method shown?
Click to expand...
Click to collapse
Yes mate I tryed..get as far as 5 vibe sometimes 7 vibes sometimes led on or off, wait 5 mins push up vol wait at least 10 mins push up again and no single buzz..gutted...I am unlocked so screwed there. Is there no way to get usb connection to do it the old way.
@ B3NJY What phone do you have (marvel/mavelc, which carrier)? Which pg76img did you use? Did you make a goldcard?
@machofx Can you boot into the bootloader? (remove and replace battery, press and hold vol- and power)
sigh
vbhtt said:
@ B3NJY What phone do you have (marvel/mavelc, which carrier)? Which pg76img did you use? Did you make a goldcard?
@machofx Can you boot into the bootloader? (remove and replace battery, press and hold vol- and power)
Click to expand...
Click to collapse
I can't boot into the bootloader. As I said, nothing is displayed when I turn the phone on nor does it vibrate, it just turns the backlight on and off every two seconds.
P.S. I tried VolumeDown+Power button after removing the battery, didn't work!
machofx said:
I can't boot into the bootloader. As I said, nothing is displayed when I turn the phone on nor does it vibrate, it just turns the backlight on and off every two seconds.
P.S. I tried VolumeDown+Power button after removing the battery, didn't work!
Click to expand...
Click to collapse
I think the ruu did not install properly. You probably have a hard brick. ( read 1st paragraph of 1st post)
I am pretty sure its marvel c and my carrier is 02uk I got it unlocked soff in shop,
I installed .sense rom but didnt like it so restored in recovery and all was fine but always had a problem with ota updates so tryed to do it manually, managed once but tryed latest update and its bricked me to black screen, volume down gives me 5/7 vibes.....
MARVEL PVT SHIP S-OFF RL
HBOOT - 1.08.0000
MICROP - 0451
RADIO - 7.53.39.03M
S/W 2.13.401.2
I got the rom from here....link proved on this site...
http://www.mediafire.com/?ih6amhh2kzm4q6g which was the correct one I think for europe, I cannot make goldcard if I cannot connect to usb can I ?
B3NJY said:
I am pretty sure its marvel c and my carrier is 02uk I got it unlocked soff in shop,
I installed .sense rom but didnt like it so restored in recovery and all was fine but always had a problem with ota updates so tryed to do it manually, managed once but tryed latest update and its bricked me to black screen, volume down gives me 5/7 vibes.....
MARVEL PVT SHIP S-OFF RL
HBOOT - 1.08.0000
MICROP - 0451
RADIO - 7.53.39.03M
S/W 2.13.401.2
I got the rom from here....link proved on this site...
http://www.mediafire.com/?ih6amhh2kzm4q6g which was the correct one I think for europe, I cannot make goldcard if I cannot connect to usb can I ?
Click to expand...
Click to collapse
My friend, you have a marvel, not marvelc. ( if it was a marvelc, then the 1st line would be MARVELC EVT1 S-OFF RL & O2 doesn't sell the marvelc). When did you check this?Which PG76IMG is that? It should have a higher s/w number than yours ( you can do it if it is lower also, but that is a much longer procedure). You can make a goldcard by putting your sd card in another htc phone also.
Help me
I cannot remember when I copied those details down but I have access to my girlfriends wildfire buzz or card reader can you help me with it please if you have time....I am on shifts at the moment and off to work now till 11.00pm but if you can find time to give me a guide I would really appreciate it....I dont think I am anywhere near as smart as you but I am sure I can follow your links and instructions...it may help a lot more people and in my eyes should be a sticky.
Thank you
Ben
B3NJY said:
I cannot remember when I copied those details down but I have access to my girlfriends wildfire buzz or card reader can you help me with it please if you have time....I am on shifts at the moment and off to work now till 11.00pm but if you can find time to give me a guide I would really appreciate it....I dont think I am anywhere near as smart as you but I am sure I can follow your links and instructions...it may help a lot more people and in my eyes should be a sticky.
Thank you
Ben
Click to expand...
Click to collapse
Well there are a lot of tutorials on the internet on how to make a goldcard. Just use Google
Sent from my HTC Wildfire S A510e using Tapatalk 2
my phone is doing the one where the screen stays white with the green htc logo i forgot to back mine up and flashing any roms are not helping
wildfire s unlocked bootloader with s-off marvelc
h-boot-1.10.0001
microp-0354
radio-0.94.00.0109
please help if u can my girlfriend is gonna kill me and/or steal my triumph lol
thank you for any help