Hey folks,
been searching and searching without any luck so far, trying to find a solution to my phone not being reconzied if i put it in recovery (volD+boot, back+power), windows sees it fine if i open the phone normally and connect it to the pc.. and i can use the ADB shell to detect it
# ../../..: adb devices
but no adb connection if the phone is in volD+power or back+Power.
sometimes Windows detects the Android 1.0 in Device manager but i wont find the drivers no matter what kind/version i fetch off the interwebz and no matter where i put it. i worked once and now the connection is just broken...
i have gotten sick and tired of the fact that i cannot get paid APPS and that the phone is filled after like 10 APP installs so i decided to root specially cause there now was a fix for the brick ...
but it seems like im pretty stuck .. neither of the 2 Rooting methods work cause of the lacking connection.... barghh...
I hope my english is not to horrible for you to read...
Kind Regards
Vicster
HELP
Hi!!! i have this problem!!! Help we please!!!
I want use usb connection for tether, but driver not found or error connection.
Also got this issue, one week that I'm trying EVERYTHING
The device is well recognized by windows but the adb can't find it (it says no device found)...
Thanks a lot for the help!
Noob question. .. did u installed htc sync? It contain USB driver 4 Windows. ..
Yeah. I have installed HTC sync and the drivers, and i have downloaded the exctracted drivers and tried to point android 1. 0 to Them, but all w7 does is tell me that it did not find any drivers for the device.
Install the leatest HTC Sync....
Boot the Phone normally and activate USB-Debugging.
Wait for Windows this installed the driver....
boot your phone into recovery and now you have driver...
Worked for me
Windos 7 Ultimate x64
Do not plug your phone on any kinds of USB HUBS, USB Extender cabels, Front PC USB ports, or any kind of strange PC cards with USB ports.
Also use only original HTC cabel which you got with your phone.
Plug your phone in first USB port on the motherboard closes to the mouse and keyboard.
My phone wasnt recognized by ADB while it was conected to front USB ports, but other things where working fine (Sd card browsing and copying)
Try and report back if it helps.
I plugged it with the OEM HTC cable, also installed the latest HTC Sync, with both latest HTC and Android SDK x64 drivers, it just doesn't work..
On win 7 64 too.
Motherboard asus p5k,my device is working only with the rear usb port.
Must be a question of usb amperage...
Works fine for me, W7 x64 Ultimate, but I only use Windows to get into recovery - linux to root the phone initially
The device acts as if it is being charged.
Steps I have taken so far:
-uninstalled T-mo Samsung mobile drivers and reinstalled
-deleted (uninstalled) ALL recognized USB devices via USB deview
-tried to connect without Samsung drivers installed and all USB devices uninstalled
-tried to connect with Samsung drivers installed and all USB devices uninstalled
-tried to connect without Samsung drivers and other devices installed
-tried to connect using safe mode, both with drivers installed and not
---**these are both trying with the current one provided on Samsung's site (1.5.14.0) and with the one found here on XDA from 25apr2013 (1.5.23.0)
-tried to connect using different USB ports
-tried to connect using a different USB port on a different USB controller altogether
The kicker:
Device is recognized instantly... on my laptop.
This means:
-It is not the USB cable I am using (even though I have tried 3 different cables altogether regardless, including the one that came with the phone)
-It is not the device itself
Possible: Windows issue? Last time this happened was long ago when I had gotten a MyTouch 3G Slide. I eventually just reinstalled Windows since I had been meaning to then. I don't want to do it now though because I have too many things installed on here to start a fresh install... but I suppose if nothing else works, that's what I'll have to do.
Before that though, I would love to hear any other suggestions from anyone here.
Some time the fault cud be the cable itself... I had same issue months ago my original samsung UsB cables didn't worked... It olwyz show the msg UsB not recognized... Then I tried with a different UsB cable (i had a Nokia UsB cable) and it worked...
Try it...
Cheers!!!
Sent from battery killer Jellybean GT-I9100 :-\
rjsmer said:
Some time the fault cud be the cable itself... I had same issue months ago my original samsung UsB cables didn't worked... It olwyz show the msg UsB not recognized... Then I tried with a different UsB cable (i had a Nokia UsB cable) and it worked...
Try it...
Cheers!!!
Sent from battery killer Jellybean GT-I9100 :-\
Click to expand...
Click to collapse
As stated, I have tried to use two other USB cables aside from just the one that came in the package.
Since all cables work on the laptop, but not this computer, I have pretty much singled it out to be a windows or a driver issue. :\
What are the specs of your desktop and the specs of your laptop? You claim it is a windows issue so I assume your laptop (that recognizes the phone) is not windows? Do you have Kies on the PC? If so, try to uninstall it completely and then install the individual drivers. Also, maybe just try updating Kies. You wouldn't need to install it, just download to your PC should work. As far as that goes, does Kies recognize the phone when plugged in at all? Does ODIN recognize the phone when plugged in? Maybe some of this will help you to find out if it is a driver issue or not. Good luck.
scott14719 said:
What are the specs of your desktop and the specs of your laptop? You claim it is a windows issue so I assume your laptop (that recognizes the phone) is not windows? Do you have Kies on the PC? If so, try to uninstall it completely and then install the individual drivers. Also, maybe just try updating Kies. You wouldn't need to install it, just download to your PC should work. As far as that goes, does Kies recognize the phone when plugged in at all? Does ODIN recognize the phone when plugged in? Maybe some of this will help you to find out if it is a driver issue or not. Good luck.
Click to expand...
Click to collapse
PC is i7 920, 12GB DDR3, Intel x58
Laptop is i5 2430M, 6GB DDR3, Sandy Bridge
Both are Win7 Pro, neither have Kies (I always just downloaded the drivers themselves) but I'm downloading it now to give it a try. As of now, nothing recognizes the phone on PC.
Kies method didn't work either
I did "Troubleshoot connection error", which I guess reinstalled the driver, but it still didn't work.
Getting ready to dig out that Win7 Pro CD at this point... :\
Shuurei said:
Kies method didn't work either
I did "Troubleshoot connection error", which I guess reinstalled the driver, but it still didn't work.
Getting ready to dig out that Win7 Pro CD at this point... :\
Click to expand...
Click to collapse
Samsung Kies isn't yet compatible with the sgh-m919. Samsung rep told me soon last night
Have you unlocked developer options yet and checked usb debugging? That might be your problem....
SBERG117 said:
Have you unlocked developer options yet and checked usb debugging? That might be your problem....
Click to expand...
Click to collapse
Enabling dev options and USB debugging was the first thing I did once I turned on the phone. Tried it both with and without, still not recognized either way. Still recognized on laptop.
I've also reinstalled windows altogether, since that fixed my issue last time around, but it's no good this time still. Clean install, formatted. No good. Previous steps from first post also taken, still no good. Tried the PDAnet method as well, no good.
At this point I am wondering if it might be an x58 issue, which would really suck, but it's the only thing I can think of given all the steps I have taken.
Okay... so what's the trick on getting Windows 7 x64 to recognize this device in Download Mode?
I have enabled USB Debugging. Tried several different ports on my Maximus V Extreme motherboard. I have tried using the PDANet drivers. Nothing works.Windows will prompt me with the "Device Driver software was not successfully installed" message. Anyone know a trick?
EDIT: FIGURED IT OUT. The last Android device I owned was the Galaxy S2. Now, back then it was understood that one should avoid Kies like the plague. However, in this case, it solved my problem. It installed all necessary drivers and I was able to communicate with ODIN. Cheers.
x58 issue
luckyduck69 said:
Okay... so what's the trick on getting Windows 7 x64 to recognize this device in Download Mode?
I have enabled USB Debugging. Tried several different ports on my Maximus V Extreme motherboard. I have tried using the PDANet drivers. Nothing works.Windows will prompt me with the "Device Driver software was not successfully installed" message. Anyone know a trick?
EDIT: FIGURED IT OUT. The last Android device I owned was the Galaxy S2. Now, back then it was understood that one should avoid Kies like the plague. However, in this case, it solved my problem. It installed all necessary drivers and I was able to communicate with ODIN. Cheers.
Click to expand...
Click to collapse
I might have pinpointed the issue!
I tried Kies again, uninstalled, reinstalled, updated. No go. I did Kies by air and got a connection! So It's gotta be something with the USB.
Although I thought it was weird, I think it might be an x58 issue, I decided to pursue that anyways.
I found out that USB issues are common with x58 (per this forum: http://www.evga.com/forums/tm.aspx?m=159610 ) and will be trying a fix located here: http://www.evga.com/forums/tm.aspx?m=442244&mpage=1
I'll report back once I try this out. Hopefully it fixes it.
If not, I just ordered another USB 3.0 controller (completely unrelated, it doesn't need to be USB 3.0, just a different controller altogether, but USB 3.0 is backwards compatible anyways. I just needed one for blackmagic) which was PCI-e x1 (still dependent on x58, so it wouldn't have mattered, check diagram on fix link), which I WAS going to install in my PCI-e x1 slot, but that would have not worked! Going to install in a PCI-e x16 and hope for the best.
I'll reply back once I test that out too.
Confirmed x58 and S4/general USB connectivity issues
Shuurei said:
I might have pinpointed the issue!
I tried Kies again, uninstalled, reinstalled, updated. No go. I did Kies by air and got a connection! So It's gotta be something with the USB.
Although I thought it was weird, I think it might be an x58 issue, I decided to pursue that anyways.
I found out that USB issues are common with x58 (per this forum: http://www.evga.com/forums/tm.aspx?m=159610 ) and will be trying a fix located here: http://www.evga.com/forums/tm.aspx?m=442244&mpage=1
I'll report back once I try this out. Hopefully it fixes it.
If not, I just ordered another USB 3.0 controller (completely unrelated, it doesn't need to be USB 3.0, just a different controller altogether, but USB 3.0 is backwards compatible anyways. I just needed one for blackmagic) which was PCI-e x1 (still dependent on x58, so it wouldn't have mattered, check diagram on fix link), which I WAS going to install in my PCI-e x1 slot, but that would have not worked! Going to install in a PCI-e x16 and hope for the best.
I'll reply back once I test that out too.
Click to expand...
Click to collapse
In case anyone was wondering or stumbles upon this later, I have a few updates.
I got the USB controller today and plugged it into the PCI-e x16 slot, plugged in the S4 and it worked completely fine.
I also contacted EVGA about the issue and will get an RMA, so perhaps it's just a faulty unit. However, this seems rather common (refer to previous linked threads) in x58 chips.
I imagine it has something to do with power distribution with the controller, which is why upping the ICH voltage fixes it for some people. The USB controller is powered via 4pin, not dependent on Southbridge. I guess the S4 has higher voltage(?) requirements for it to be recognized. It seems rather strange since my other devices are still recognized, but well, that's what I managed to come up with.
Cheers.
Shuurei said:
In case anyone was wondering or stumbles upon this later, I have a few updates.
I got the USB controller today and plugged it into the PCI-e x16 slot, plugged in the S4 and it worked completely fine.
I also contacted EVGA about the issue and will get an RMA, so perhaps it's just a faulty unit. However, this seems rather common (refer to previous linked threads) in x58 chips.
I imagine it has something to do with power distribution with the controller, which is why upping the ICH voltage fixes it for some people. The USB controller is powered via 4pin, not dependent on Southbridge. I guess the S4 has higher voltage(?) requirements for it to be recognized. It seems rather strange since my other devices are still recognized, but well, that's what I managed to come up with.
Cheers.
Click to expand...
Click to collapse
Here's my craziness.
USB connection was working yesterday. Today, it is not.
I have uninstalled/reinstalled the Samsung Windows drivers/Kies
I have even adjusted my southbridge voltage to 1.2V in my BIOS
Still, no joy.
Curiously, when I boot the phone into download/ODIN mode and connect it, ODIN recognizes the connection. Reboot back into normal mode, and no USB connection is recognized. It is not showing up in my Device Manager as an unrecognized device. It just doesn't know it is there (unless phone is in download mode).
UPDATE: Solved. I had installed this ROM (http://forum.xda-developers.com/showthread.php?t=2261013). Reading back over the thread, it provided instructions for re-enabling the USB recognition of the phone. Had to re-enable the developer options and reset USB debugging. Makes sense now.
HI
I'm facing this issue today, I've tried two different laptops, both have Windows 7 x64 installed. I've tried every USB port on the two machines, I've tried with three different cables, I've downloaded and installed every USB driver there is. no use!
I'm out of options here and I can't think where to look further.
any help please?
shuurei said:
the device acts as if it is being charged.
Steps i have taken so far:
-uninstalled t-mo samsung mobile drivers and reinstalled
-deleted (uninstalled) all recognized usb devices via usb deview
-tried to connect without samsung drivers installed and all usb devices uninstalled
-tried to connect with samsung drivers installed and all usb devices uninstalled
-tried to connect without samsung drivers and other devices installed
-tried to connect using safe mode, both with drivers installed and not
---**these are both trying with the current one provided on samsung's site (1.5.14.0) and with the one found here on xda from 25apr2013 (1.5.23.0)
-tried to connect using different usb ports
-tried to connect using a different usb port on a different usb controller altogether
the kicker:
Device is recognized instantly... On my laptop.
This means:
-it is not the usb cable i am using (even though i have tried 3 different cables altogether regardless, including the one that came with the phone)
-it is not the device itself
possible: Windows issue? Last time this happened was long ago when i had gotten a mytouch 3g slide. I eventually just reinstalled windows since i had been meaning to then. I don't want to do it now though because i have too many things installed on here to start a fresh install... But i suppose if nothing else works, that's what i'll have to do.
Before that though, i would love to hear any other suggestions from anyone here.
Click to expand...
Click to collapse
很想帮你啊 可是英文水平比较拙计
ok so now I'm guessing it is not windows, I tried on another machine with Windows Vista and got the same error.
any thoughts, anyone?
Did a factory reset for the phone
no it works!
don't know why
I just picked up this phone a couple days ago and last night tried to get the USB to work with no luck. I've tried everything I can think of. It does work in PTP mode but not MTP mode. I was able to use odin to on it though, so I was able to root it.
I've tried both in linux and on windows xp. I've never had an issue with any phone on linux and have installed/removed drivers numerous times on XP.
Tried 3 different cables, Factory reset with and without USB installed, tried pretty much everything I could find while googling similar problems (removing old registry entries, installed media player, etc)
I have adb installed on my linux box and even with debugging enabled I can't even get adb to connect to the phone.
Definitely something strange going on. Maybe I'll switch to cm10.1 to see if that makes a difference
I cant get my computer (windows 7) to connect with the phone when the phone is on, and was hoping some one might have found a fix.
This might fix it...
Shuurei said:
The device acts as if it is being charged.
Steps I have taken so far:
-uninstalled T-mo Samsung mobile drivers and reinstalled
-deleted (uninstalled) ALL recognized USB devices via USB deview
-tried to connect without Samsung drivers installed and all USB devices uninstalled
-tried to connect with Samsung drivers installed and all USB devices uninstalled
-tried to connect without Samsung drivers and other devices installed
-tried to connect using safe mode, both with drivers installed and not
---**these are both trying with the current one provided on Samsung's site (1.5.14.0) and with the one found here on XDA from 25apr2013 (1.5.23.0)
-tried to connect using different USB ports
-tried to connect using a different USB port on a different USB controller altogether
The kicker:
Device is recognized instantly... on my laptop.
This means:
-It is not the USB cable I am using (even though I have tried 3 different cables altogether regardless, including the one that came with the phone)
-It is not the device itself
Possible: Windows issue? Last time this happened was long ago when I had gotten a MyTouch 3G Slide. I eventually just reinstalled Windows since I had been meaning to then. I don't want to do it now though because I have too many things installed on here to start a fresh install... but I suppose if nothing else works, that's what I'll have to do.
Before that though, I would love to hear any other suggestions from anyone here.
Click to expand...
Click to collapse
Here's a link with a list of things to try what you may not have tried to fix your problems.
A small number of devices I have worked on have a weird thing, that the first time I plug the cable into the computer, it connects but won't show up on the screen. unplugging the USB cable from the machine for maybe 3 seconds, and reinserting makes the connection work... go figure! :>)
Aloha and Good Luck!
http://forum.xda-developers.com/showthread.php?p=32906335#post32906335
I have a S2 with T-Mobile. THe USB port is not recognized when I plug it in to the computer. I have tried Windows Xp, Windows 7 neither will see it. I have updated the drivers in both Xp and 7 I have tried different USB ports, nothing works. I have done a factory reset that still did nothing. Looking at the port itself I see no damage, no bent pins etc etc. What could be going on? Do USB ports go dead on these phones or what? I wonder if I root the phone and install a custom rom if that would help or fix the problem?? HELP!
Forgot to mention my phone does charge in the PC, but it will just not see it....
falcon26 said:
I have a S2 with T-Mobile. THe USB port is not recognized when I plug it in to the computer. I have tried Windows Xp, Windows 7 neither will see it. I have updated the drivers in both Xp and 7 I have tried different USB ports, nothing works. I have done a factory reset that still did nothing. Looking at the port itself I see no damage, no bent pins etc etc. What could be going on? Do USB ports go dead on these phones or what? I wonder if I root the phone and install a custom rom if that would help or fix the problem?? HELP!
Forgot to mention my phone does charge in the PC, but it will just not see it....
Click to expand...
Click to collapse
Hate to say in order to root the device ur going to need to connect to the PC and use Odin, no other way, if the port was dead it wouldn't charge, have u tried every USB port? And ur going to need the factory OEM USB wire, (the one that came with the phone) sometimes the computer won't recognize it as a device without the factory cable, it will still charge though
non of the phones are conecting to my pc.....my n7100 my mothers s7500 my girls gt5570 and when condected you can paste or copy because i get error and kies trying to conect but nothing....but my laptop works great.....any idea?
how about you uninstall Kies and install the USB drivers form here: http://forum.xda-developers.com/showthread.php?t=961956
also make sure you are using original samsung usb cable ,sometimes kies/odin doesn't recognize the phone when using non samsung cable
singhpratik87 said:
also make sure you are using original samsung usb cable ,sometimes kies/odin doesn't recognize the phone when using non samsung cable
Click to expand...
Click to collapse
its recpgnizable on laptop and not in pc?
Well, different PCs can act differently to different hardware, software, drivers, etc.
Just curious... what PC you have (Specs)... and if you have installed Intel RST (Rapid Storage Technology)? This Intel RST is a real piece of crap that is supposed to help boost your SSD and other drives (though mostly for RAID)... but seems too many people have headaches with it. I just built a new PC with these drivers that came with my motherboard... and it gave me a bunch of problems with my Note2 being detected (even with Samsung USB drivers installed). Finally I got rid of it, and presto, everything fine again.
Just at the title says. Yes i have tried different ports and cords. All drivers are up to date. All cables and ports work as they all work with my nexus 7. What am I missing?!?!
ShadeXVII said:
Just at the title says. Yes i have tried different ports and cords. All drivers are up to date. All cables and ports work as they all work with my nexus 7. What am I missing?!?!
Click to expand...
Click to collapse
Enabled USB debugging?
Thought that may have been the issue... Enabled USB debugging still same issue.
Edit: If i change it to PTP i can see it as phone on the PC but can't view it MTP.
Try reinstalling drivers and reboot computer
ShadeXVII said:
Thought that may have been the issue... Enabled USB debugging still same issue.
Edit: If i change it to PTP i can see it as phone on the PC but can't view it MTP.
Click to expand...
Click to collapse
I think some drivers have to be installed for viewing in MTP..
I have provided a zip file of Asus Android USB drivers... There is a folder named MTP... I think you have to install those drivers.. These drivers are compatible with XP,VISTA, 7..
Please confirm the working of MPT/Drivers if successful
I have the same issue.
Windows 7 only recognises the ZF2 once out of around 10 connection attempts.
I found that deleting the USB common drivers and re-booting Windows works for one new connection, but after that the problem returns. I think the drivers that are automatically downloaded are not very reliable / stable.
I find that if I keep unplugging / re-plugging the cable, it will eventually recognise it.
It's a bit of a pain to be honest and it doesn't matter how many different cables or different USB ports I try it makes no difference.
I just spent 20 minutes with this issue ... until I realized I was using my HTC USB cable. I decided to follow the most common suggestion and plugged in the ORIGINAL ASUS cable that came with the ZF2. Worked flawlessly.
Hope you have the same luck!
Ended up being something wrong with a quick charge driver on my mother board with this. Ended up reflashing BIOS and removing that and it fixed my issue. Talked to other people as well and a lot are reporting they have to use the cable it came with as well.
ShadeXVII said:
Ended up being something wrong with a quick charge driver on my mother board with this. Ended up reflashing BIOS and removing that and it fixed my issue. Talked to other people as well and a lot are reporting they have to use the cable it came with as well.
Click to expand...
Click to collapse
That's great to hear!
I also have an Asus board, but good thing I did not install the Quick charger drivers! I would never guess that as the culprit!
lordpipa said:
Try reinstalling drivers and reboot computer
Click to expand...
Click to collapse
Please. tell me how to install Asus UDB Drivers from the Zip File on Windows 7
Did you had to reflash with adb sideload? or just going to the recovery mode and selecting hard reset?