Installed the tmobile samsung galaxy SII USB drivers , I am using windows vista and it does not recognize the phone. I tried another vista computer it still can not recognize it. I tried an XP computer, it still can not recognize the phone.
How do I fix this?
Tried using the USB utilities under settings --> wireless and network
Still no luck
any suggestions will be appreciated
tomasitoc said:
Installed the tmobile samsung galaxy SII USB drivers , I am using windows vista and it does not recognize the phone. I tried another vista computer it still can not recognize it. I tried an XP computer, it still can not recognize the phone.
How do I fix this?
Tried using the USB utilities under settings --> wireless and network
Still no luck
any suggestions will be appreciated
Click to expand...
Click to collapse
since you install the drivers into multiple computers and tested them all... it might be your phone.
First can you give more detail on what happens when you plug your phone in? Does your computer make any sounds or searches anything?
ALSO Try installing kies.
if that doesn't work either... looks like you need a warranty exchange
Try using an oem Samsung usb to micro usb cable. I had this problem with my Samsung Galaxy Epic a while back. Everytime I used a generic cable lying around my computer would not recognize my phone. When I used a Samsung cable it worked. Your computer should automatically identify your phone using the right cable. If not re-install them and don't forget to restart your computer before attempting to connect to your computer again. Good luck.
I've had this problem too.
Initially I had kies installed and had to launch the program to access the two 'mounted' removable drives.
I assume the drives mount, but you can't access the drives?
If that's the case, look on the phone and pull down the status bar and check to see if it sees the USB connection. Select that, and allow it to connect as USB storage.
thanks guys for all the quick response.
The problem seem to fix itself. After removing and attaching the USB cable a number of times, the PC suddenly recognized the phone.
I don't know what fixed it.
Now, I can proceed to root my phone!
tomasitoc said:
thanks guys for all the quick response.
The problem seem to fix itself. After removing and attaching the USB cable a number of times, the PC suddenly recognized the phone.
I don't know what fixed it.
Now, I can proceed to root my phone!
Click to expand...
Click to collapse
you probably didn't give it enough time for the pc to actually install the needed components.. it takes a good 5-10 mins for everything to finish installing
I'm faced with the same problem. Only different is, as soon as it shows connect to usb from the notification bar if goes away. I tried the usb tool in wireless but still wont work. I tried the samsung cable as well
know it sounds dumb, but have you rebooted lately? mine wouldnt recognize the sd card when plugged into comp....rebooted....all is well
Ok so I have a new epic 4g (my other one broke). it is not rooted yet so I installed the drivers and everything and go to use odin but it never recognizes it. i have tried 2 different USB cords, even though I rooted my other epic using the same cord.
Any help would be appreciated,
Thanks!
grishky said:
Ok so I have a new epic 4g (my other one broke). it is not rooted yet so I installed the drivers and everything and go to use odin but it never recognizes it. i have tried 2 different USB cords, even though I rooted my other epic using the same cord.
Any help would be appreciated,
Thanks!
Click to expand...
Click to collapse
Did you use the same port? Also make sure you are not using a hub or extension cable.
DL Drivers from Samsung/Delete USB Hubs in Dev Mgr
I actually had the same problem. It took me a while, and I'm not sure I totaly understand why, but this is what I think I did:
I had an EVO 4G and it had been rooted on the same PC, so just plugging the phone in using that cable, the PC (Win 7) kept seeing an Android phone (Generic). I uninstalled via Device Manager all USB Root Hub (Found this in another post), and rebooted.
When I plugged the phone back in, again it came up as generic Android. I deleted that, scanned for HW changes, and installed drivers from Samsung web site.
Still couldn't get Odin to see my phone, so I switched cables to the OEM that came with my phone, placed the phone into DL mode (PWR + VOL DOWN) then plugged it in. My PC now saw this as a Samsung Android Device under the USB section in Device Manager. Odin then recogonized my phone and the rest was all down hill.
One trick I also figured out was to run Odin as Admin. Even though my profile was an admin, it's a stupid UAC thing. Hope this helps.
stuff to try
Different usb port
reboot PC after installing drivers
Make sure phone is not plugged in when you installed the drivers
Different usb cable
run odin in admin mode
refresh windows devices when phone is plugged in
good luck!
you might try heimdall, as it comes with a usb driver that you can force install (has worked for me perfectly when odin is overly picky)
The device acts as if it is being charged.
Steps I have taken so far:
-uninstalled T-mo Samsung mobile drivers and reinstalled
-deleted (uninstalled) ALL recognized USB devices via USB deview
-tried to connect without Samsung drivers installed and all USB devices uninstalled
-tried to connect with Samsung drivers installed and all USB devices uninstalled
-tried to connect without Samsung drivers and other devices installed
-tried to connect using safe mode, both with drivers installed and not
---**these are both trying with the current one provided on Samsung's site (1.5.14.0) and with the one found here on XDA from 25apr2013 (1.5.23.0)
-tried to connect using different USB ports
-tried to connect using a different USB port on a different USB controller altogether
The kicker:
Device is recognized instantly... on my laptop.
This means:
-It is not the USB cable I am using (even though I have tried 3 different cables altogether regardless, including the one that came with the phone)
-It is not the device itself
Possible: Windows issue? Last time this happened was long ago when I had gotten a MyTouch 3G Slide. I eventually just reinstalled Windows since I had been meaning to then. I don't want to do it now though because I have too many things installed on here to start a fresh install... but I suppose if nothing else works, that's what I'll have to do.
Before that though, I would love to hear any other suggestions from anyone here.
Some time the fault cud be the cable itself... I had same issue months ago my original samsung UsB cables didn't worked... It olwyz show the msg UsB not recognized... Then I tried with a different UsB cable (i had a Nokia UsB cable) and it worked...
Try it...
Cheers!!!
Sent from battery killer Jellybean GT-I9100 :-\
rjsmer said:
Some time the fault cud be the cable itself... I had same issue months ago my original samsung UsB cables didn't worked... It olwyz show the msg UsB not recognized... Then I tried with a different UsB cable (i had a Nokia UsB cable) and it worked...
Try it...
Cheers!!!
Sent from battery killer Jellybean GT-I9100 :-\
Click to expand...
Click to collapse
As stated, I have tried to use two other USB cables aside from just the one that came in the package.
Since all cables work on the laptop, but not this computer, I have pretty much singled it out to be a windows or a driver issue. :\
What are the specs of your desktop and the specs of your laptop? You claim it is a windows issue so I assume your laptop (that recognizes the phone) is not windows? Do you have Kies on the PC? If so, try to uninstall it completely and then install the individual drivers. Also, maybe just try updating Kies. You wouldn't need to install it, just download to your PC should work. As far as that goes, does Kies recognize the phone when plugged in at all? Does ODIN recognize the phone when plugged in? Maybe some of this will help you to find out if it is a driver issue or not. Good luck.
scott14719 said:
What are the specs of your desktop and the specs of your laptop? You claim it is a windows issue so I assume your laptop (that recognizes the phone) is not windows? Do you have Kies on the PC? If so, try to uninstall it completely and then install the individual drivers. Also, maybe just try updating Kies. You wouldn't need to install it, just download to your PC should work. As far as that goes, does Kies recognize the phone when plugged in at all? Does ODIN recognize the phone when plugged in? Maybe some of this will help you to find out if it is a driver issue or not. Good luck.
Click to expand...
Click to collapse
PC is i7 920, 12GB DDR3, Intel x58
Laptop is i5 2430M, 6GB DDR3, Sandy Bridge
Both are Win7 Pro, neither have Kies (I always just downloaded the drivers themselves) but I'm downloading it now to give it a try. As of now, nothing recognizes the phone on PC.
Kies method didn't work either
I did "Troubleshoot connection error", which I guess reinstalled the driver, but it still didn't work.
Getting ready to dig out that Win7 Pro CD at this point... :\
Shuurei said:
Kies method didn't work either
I did "Troubleshoot connection error", which I guess reinstalled the driver, but it still didn't work.
Getting ready to dig out that Win7 Pro CD at this point... :\
Click to expand...
Click to collapse
Samsung Kies isn't yet compatible with the sgh-m919. Samsung rep told me soon last night
Have you unlocked developer options yet and checked usb debugging? That might be your problem....
SBERG117 said:
Have you unlocked developer options yet and checked usb debugging? That might be your problem....
Click to expand...
Click to collapse
Enabling dev options and USB debugging was the first thing I did once I turned on the phone. Tried it both with and without, still not recognized either way. Still recognized on laptop.
I've also reinstalled windows altogether, since that fixed my issue last time around, but it's no good this time still. Clean install, formatted. No good. Previous steps from first post also taken, still no good. Tried the PDAnet method as well, no good.
At this point I am wondering if it might be an x58 issue, which would really suck, but it's the only thing I can think of given all the steps I have taken.
Okay... so what's the trick on getting Windows 7 x64 to recognize this device in Download Mode?
I have enabled USB Debugging. Tried several different ports on my Maximus V Extreme motherboard. I have tried using the PDANet drivers. Nothing works.Windows will prompt me with the "Device Driver software was not successfully installed" message. Anyone know a trick?
EDIT: FIGURED IT OUT. The last Android device I owned was the Galaxy S2. Now, back then it was understood that one should avoid Kies like the plague. However, in this case, it solved my problem. It installed all necessary drivers and I was able to communicate with ODIN. Cheers.
x58 issue
luckyduck69 said:
Okay... so what's the trick on getting Windows 7 x64 to recognize this device in Download Mode?
I have enabled USB Debugging. Tried several different ports on my Maximus V Extreme motherboard. I have tried using the PDANet drivers. Nothing works.Windows will prompt me with the "Device Driver software was not successfully installed" message. Anyone know a trick?
EDIT: FIGURED IT OUT. The last Android device I owned was the Galaxy S2. Now, back then it was understood that one should avoid Kies like the plague. However, in this case, it solved my problem. It installed all necessary drivers and I was able to communicate with ODIN. Cheers.
Click to expand...
Click to collapse
I might have pinpointed the issue!
I tried Kies again, uninstalled, reinstalled, updated. No go. I did Kies by air and got a connection! So It's gotta be something with the USB.
Although I thought it was weird, I think it might be an x58 issue, I decided to pursue that anyways.
I found out that USB issues are common with x58 (per this forum: http://www.evga.com/forums/tm.aspx?m=159610 ) and will be trying a fix located here: http://www.evga.com/forums/tm.aspx?m=442244&mpage=1
I'll report back once I try this out. Hopefully it fixes it.
If not, I just ordered another USB 3.0 controller (completely unrelated, it doesn't need to be USB 3.0, just a different controller altogether, but USB 3.0 is backwards compatible anyways. I just needed one for blackmagic) which was PCI-e x1 (still dependent on x58, so it wouldn't have mattered, check diagram on fix link), which I WAS going to install in my PCI-e x1 slot, but that would have not worked! Going to install in a PCI-e x16 and hope for the best.
I'll reply back once I test that out too.
Confirmed x58 and S4/general USB connectivity issues
Shuurei said:
I might have pinpointed the issue!
I tried Kies again, uninstalled, reinstalled, updated. No go. I did Kies by air and got a connection! So It's gotta be something with the USB.
Although I thought it was weird, I think it might be an x58 issue, I decided to pursue that anyways.
I found out that USB issues are common with x58 (per this forum: http://www.evga.com/forums/tm.aspx?m=159610 ) and will be trying a fix located here: http://www.evga.com/forums/tm.aspx?m=442244&mpage=1
I'll report back once I try this out. Hopefully it fixes it.
If not, I just ordered another USB 3.0 controller (completely unrelated, it doesn't need to be USB 3.0, just a different controller altogether, but USB 3.0 is backwards compatible anyways. I just needed one for blackmagic) which was PCI-e x1 (still dependent on x58, so it wouldn't have mattered, check diagram on fix link), which I WAS going to install in my PCI-e x1 slot, but that would have not worked! Going to install in a PCI-e x16 and hope for the best.
I'll reply back once I test that out too.
Click to expand...
Click to collapse
In case anyone was wondering or stumbles upon this later, I have a few updates.
I got the USB controller today and plugged it into the PCI-e x16 slot, plugged in the S4 and it worked completely fine.
I also contacted EVGA about the issue and will get an RMA, so perhaps it's just a faulty unit. However, this seems rather common (refer to previous linked threads) in x58 chips.
I imagine it has something to do with power distribution with the controller, which is why upping the ICH voltage fixes it for some people. The USB controller is powered via 4pin, not dependent on Southbridge. I guess the S4 has higher voltage(?) requirements for it to be recognized. It seems rather strange since my other devices are still recognized, but well, that's what I managed to come up with.
Cheers.
Shuurei said:
In case anyone was wondering or stumbles upon this later, I have a few updates.
I got the USB controller today and plugged it into the PCI-e x16 slot, plugged in the S4 and it worked completely fine.
I also contacted EVGA about the issue and will get an RMA, so perhaps it's just a faulty unit. However, this seems rather common (refer to previous linked threads) in x58 chips.
I imagine it has something to do with power distribution with the controller, which is why upping the ICH voltage fixes it for some people. The USB controller is powered via 4pin, not dependent on Southbridge. I guess the S4 has higher voltage(?) requirements for it to be recognized. It seems rather strange since my other devices are still recognized, but well, that's what I managed to come up with.
Cheers.
Click to expand...
Click to collapse
Here's my craziness.
USB connection was working yesterday. Today, it is not.
I have uninstalled/reinstalled the Samsung Windows drivers/Kies
I have even adjusted my southbridge voltage to 1.2V in my BIOS
Still, no joy.
Curiously, when I boot the phone into download/ODIN mode and connect it, ODIN recognizes the connection. Reboot back into normal mode, and no USB connection is recognized. It is not showing up in my Device Manager as an unrecognized device. It just doesn't know it is there (unless phone is in download mode).
UPDATE: Solved. I had installed this ROM (http://forum.xda-developers.com/showthread.php?t=2261013). Reading back over the thread, it provided instructions for re-enabling the USB recognition of the phone. Had to re-enable the developer options and reset USB debugging. Makes sense now.
HI
I'm facing this issue today, I've tried two different laptops, both have Windows 7 x64 installed. I've tried every USB port on the two machines, I've tried with three different cables, I've downloaded and installed every USB driver there is. no use!
I'm out of options here and I can't think where to look further.
any help please?
shuurei said:
the device acts as if it is being charged.
Steps i have taken so far:
-uninstalled t-mo samsung mobile drivers and reinstalled
-deleted (uninstalled) all recognized usb devices via usb deview
-tried to connect without samsung drivers installed and all usb devices uninstalled
-tried to connect with samsung drivers installed and all usb devices uninstalled
-tried to connect without samsung drivers and other devices installed
-tried to connect using safe mode, both with drivers installed and not
---**these are both trying with the current one provided on samsung's site (1.5.14.0) and with the one found here on xda from 25apr2013 (1.5.23.0)
-tried to connect using different usb ports
-tried to connect using a different usb port on a different usb controller altogether
the kicker:
Device is recognized instantly... On my laptop.
This means:
-it is not the usb cable i am using (even though i have tried 3 different cables altogether regardless, including the one that came with the phone)
-it is not the device itself
possible: Windows issue? Last time this happened was long ago when i had gotten a mytouch 3g slide. I eventually just reinstalled windows since i had been meaning to then. I don't want to do it now though because i have too many things installed on here to start a fresh install... But i suppose if nothing else works, that's what i'll have to do.
Before that though, i would love to hear any other suggestions from anyone here.
Click to expand...
Click to collapse
很想帮你啊 可是英文水平比较拙计
ok so now I'm guessing it is not windows, I tried on another machine with Windows Vista and got the same error.
any thoughts, anyone?
Did a factory reset for the phone
no it works!
don't know why
I just picked up this phone a couple days ago and last night tried to get the USB to work with no luck. I've tried everything I can think of. It does work in PTP mode but not MTP mode. I was able to use odin to on it though, so I was able to root it.
I've tried both in linux and on windows xp. I've never had an issue with any phone on linux and have installed/removed drivers numerous times on XP.
Tried 3 different cables, Factory reset with and without USB installed, tried pretty much everything I could find while googling similar problems (removing old registry entries, installed media player, etc)
I have adb installed on my linux box and even with debugging enabled I can't even get adb to connect to the phone.
Definitely something strange going on. Maybe I'll switch to cm10.1 to see if that makes a difference
I cant get my computer (windows 7) to connect with the phone when the phone is on, and was hoping some one might have found a fix.
This might fix it...
Shuurei said:
The device acts as if it is being charged.
Steps I have taken so far:
-uninstalled T-mo Samsung mobile drivers and reinstalled
-deleted (uninstalled) ALL recognized USB devices via USB deview
-tried to connect without Samsung drivers installed and all USB devices uninstalled
-tried to connect with Samsung drivers installed and all USB devices uninstalled
-tried to connect without Samsung drivers and other devices installed
-tried to connect using safe mode, both with drivers installed and not
---**these are both trying with the current one provided on Samsung's site (1.5.14.0) and with the one found here on XDA from 25apr2013 (1.5.23.0)
-tried to connect using different USB ports
-tried to connect using a different USB port on a different USB controller altogether
The kicker:
Device is recognized instantly... on my laptop.
This means:
-It is not the USB cable I am using (even though I have tried 3 different cables altogether regardless, including the one that came with the phone)
-It is not the device itself
Possible: Windows issue? Last time this happened was long ago when I had gotten a MyTouch 3G Slide. I eventually just reinstalled Windows since I had been meaning to then. I don't want to do it now though because I have too many things installed on here to start a fresh install... but I suppose if nothing else works, that's what I'll have to do.
Before that though, I would love to hear any other suggestions from anyone here.
Click to expand...
Click to collapse
Here's a link with a list of things to try what you may not have tried to fix your problems.
A small number of devices I have worked on have a weird thing, that the first time I plug the cable into the computer, it connects but won't show up on the screen. unplugging the USB cable from the machine for maybe 3 seconds, and reinserting makes the connection work... go figure! :>)
Aloha and Good Luck!
http://forum.xda-developers.com/showthread.php?p=32906335#post32906335
Hello all!
First: I promise I searched the forums and google as hard as I could!
I'm running AOKP JB with CWM, although the problem was present on stock ICS from T-Mobile.
Symptoms: Computer and phone will refuse to acknowledge any connection (nothing shows up in Device Manager), except the phone will still charge. If I do the "remove the battery with USB plugged in" trick, the first time I do it, it will recognize an unknown device, but kies and adb won't recognize it. If I unplug it and plug it back in, it'll go back to not acknowledging any connection.
I previously programmed it (when I was still running stock ROM) via ADB via WiFi, but I need to be able to use ADB via USB. Besides, I can't seem to get ADB over WiFi anymore.
When I plug it into a different computer (Win7), it will, however, recognize my phone.
Earlier this year, before I ever tried programming via WiFi, it connected to my Win8 machine with no problem. I don't think it's a problem with the wifi setup though because the ROM was reinstalled and of course I've restarted ADB in USB mode in the months since...
What I've tried:
Reinstalling Kies
Reinstalling Samsung USB drivers
[^]Restarting the ADB server
Updating ADB
Trying different USB cables
Trying different USB ports
Toggling USB debugging
Toggling MTP mode
The UART thing from the dialer
Restarting the phone and the computer (of course)
Checking to see if my computer's USB drivers need to be updated
The android terminal command "setprop persist.sys.usb.config mass_storage,adb"
Pulling and replacing the battery while connected via USB
Crying in a corner
If anyone can help me, it'd be greatly appreciated! I'm all out of ideas and Google is no longer helpful =/
try to uninstall the drivers that are present anything samsung related to your drivers ... then connect the phone and let the process do its thing if you have the samsung drivers saved on your PC and the drivers still aint working update the drivers and then manually click where the drivers are to install them and hopefully it will work and when you tried MTP is it the only option it gives you no storage or anything ??... and is usb debugging on when you are trying all this ??
krazierokz said:
try to uninstall the drivers that are present anything samsung related to your drivers ... then connect the phone and let the process do its thing if you have the samsung drivers saved on your PC and the drivers still aint working update the drivers and then manually click where the drivers are to install them and hopefully it will work and when you tried MTP is it the only option it gives you no storage or anything ??... and is usb debugging on when you are trying all this ??
Click to expand...
Click to collapse
I tried on my work computer that didn't have any samsung drivers and when the "unknown device" dialog popped up it didn't do anything or install anything, nor did it show up in Device Manager. Unplugging and replugging it back in did not reproduce the dialog box. Togged USB Debugging and still no dialog box saying it recognized it.
The thing with the samsung drivers is that they're self installing so even if it popped up in Device Manager, I wouldn't be able to manually update the drivers =/
I tried MTP both with and without USB Debugging, although it also gives the option for PTP.
At this point do you think I should unroot and go back to stock? It's not been recognized on three computers now! =[
Are you using the stock cable? My computer wouldn't recognize mine without it.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
foltz61 said:
Are you using the stock cable? My computer wouldn't recognize mine without it.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Click to expand...
Click to collapse
Both the stock cable and a generic cable.
Similar problem
Similar problem as the OP. And hi guys, it's nice to be on these forums.
My device, when I plug it in using the stock cable, doesn't even charge. It doesn't show up in device manager, nor does it give me a notification, or say it's unsupported and bear that yellow icon. I have tried using different USB ports, I have tried the toggling USB debugging, I have tried restarting phone, computer, and taking out battery. I have tried that PDA/MODEM dialer trick. I am using 4.1.2 Jellybean, not rooted. (that WAS my goal,, until I hit this roadblock) I have not connected it to the computer in the past, it's relatively new. I'm thinking the cable is bust.
Any suggestions would be appreciated. It charges fine through a wall outlet plug, be it generic or stock.
so guys ive come to a conclusion i think its something in the samsung usb cables try getting yourself a blackberry usb cable , TRUST ME !!! ever since i got my phoness etc... tablet and yadi yadi samsung usb cables have always seemed to give me problems i think its because they are multi data/charging cables and when using the blackberry usb cable i have never ever once encountered a problem with any of my phones sd/storage problems do yourself a favor and pick up one of those cables and you will be golden !! if not then i guess im the only lucky one :LOL here you go http://www.amazon.com/Blackberry-Travel-Adapter-Micro-Cable/dp/B004VMVSYK/ref=pd_sim_cps_2 5 bucks!
Edit also one more test boot into recovery and click in the advanced menu and see if mount usb works for you in recovery mode ??
FIX (try using a generic cable)
I actually solved it on my own! After borrowing a generic cable from a friend it booted up! The Samsung cable was just not doing its thing.
yeah im telling you those cables they provide are JUNK!!! i only use my samsung to charge because they do that well but data they are str8 CRAP!! glad you got it up and going
OP
Hope OP will have the same luck as me...pray to the Android gods...
Lol:thumbup:
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Prior to my SIII having charging/syncing problems it would connect to my Windows 8.1 PC without issue. When I started having charging/syncing problems I had the USB charging port replaced by a local store. Since then it won't connect to the PC for me to transfer files to the S|D card or the phone itself, phoned the store where I had it done and was told it should be the same driver. I connected my girlfriends S3 to my PC went into device manager and uninstalled the drivers for the phone and then disconnected hers re-installed the drivers still won't connect (but hers will without issue and it same make model phone only difference is the cell provider) did a windows update and it installed some Samsung drivers, but still won't connect to PC. I should mention it won't connect to PC but it will charge the phone. I tried shutting phone down pulling battery and waiting a few minutes replacing battery and powering on phone also rebooted the PC and still the same issue it won't connect to PC. All I get is USB device not recognized error. Would just having my old USB charging port changed and a new one soldered on change which drivers are used to connect it to the PC? Is there anything else I could try that would let me connect and transfer files to the SD card or the phone?
I assume you tried different cables and a Win7 machine?
audit13 said:
I assume you tried different cables and a Win7 machine?
Click to expand...
Click to collapse
Different cables yes (including stock cable for a SIII mini which was bought for girlfriends daughter about 2 weeks ago and that had same issues). Only tried the windows 8 laptop for thats was where i did all my charging syncing before and it had no issues until the usb port became damaged and then replaced by the store here.
audit13 said:
I assume you tried different cables and a Win7 machine?
Click to expand...
Click to collapse
I don't have a Win7 system to try it with but tried with an XP system and it also won't sync but will charge no error message but the device doesn't show up like the other SIII's in the house do
Based on what you have tried so far, I would conclule that the port was not properly installed.
audit13 said:
Based on what you have tried so far, I would conclule that the port was not properly installed.
Click to expand...
Click to collapse
Will take it back see if they can get it working or at least show me the drivers it is using at the store.
I would second that, if all of the sync points aren't properly soldered then it could charge but won't sync
Sent from my SGH-I747M using Tapatalk