Related
CAUTION: USE THIS ROM AS YOUR OWN RISK.......Be sure you have the official rom in case it is not working for you. It appears that even though you have the same tablet Reference, depending on when you buy it, hardware might be a bit different and most likely you will take the risk of having a unusable Touch screen or wifi...
It works for me on my SP704CET bought in France. (I use LSMOD and here the loaded driver: mxc622x, rtl8150, mcs 7830, qf9700, asix, sun5i_csi, gc0308, camera, cedarx, mali, gsl1680, gt811, byd693x,ZET622X, ssd253x, ft5x_ts)
Hi all,
If anyone is interrested in J.B.4.2.2 for Memup SlidePad 704 CET (Only CET, I did not test on 704 CE.
I can post the rom image created... (I will post it later on tonight)
Leave me a private message if you need it.
Content of the ROM
- Rom basically design for Manta13
- Your device will have MID13 as name (No more CET704)
- Jelly Bean 4.2.2
- Fast rom (Menu and all are way faster than 4.1.1 original firmware)
- CWM mod recovery working out of the box
- Root device with Play store.
This ROM come as east country language first, you need to go to setting icon, the language (Icon with a White A letter) and the first option will be language, select yours.
to check you table model, look on the back of the table, even if on the back it says 704CE, you need to look at the white sticker that will say if it is a CE or CET.
As usual, to flash the image, go to boot loader and use livesuite 1.7.
Procedure on the SP704CET with livesuit:
- completly turn off the tablet, unplug cable
- start livesuite and select the downloaded image file
- keep the VOL- button pressed and plug the usb cable
- without releasing the VOL- button press the Power button 6 times.
- You should hear windows sound saying a USB device has been plugged
- if windows request it, install the driver from Livesuitefolder\usbdriver
- Livesuite should automatically start the flashing process.
- when prompted, "Format device" press YEs. (It might take a minute)
- When it s 100% you tablet should reboot.
Done.
External download link: https://mega.co.nz/#!F4NizYZI!Tei4mztIuhv_jccLQCYWvBo5rZNI-0057p3MxzvoFNc
Note: I did not invent anything, thanks to the good work of MANTA team members. I just found out this rom works, I just had to modify the touchscreen drivers and idc files.
Cheers
I managed to create an other rom:
link:
Linked removed, this rom is bogus. Use the 1st one, i will try to update it again when i get back
Same version as the previous one with:
- Change to build.prop to match the tablet name 704CET (previous rom was detected as MANTA MID13, from the originial rom)
- Modified boot animation
- added some JellyBam tweak and application (if needed you can installed them from the apk files located in /system/app)
- Add Jellybam static and dynamic wall paper
- other small modifications
Let me know if you like it.
Small hick, you will need to reinstall firefox, the version I add to the rom is not working after first boot
go to /system/app and install jellybam launcher etc...
I hope you will like it, this is only my second rom cooking
Cheers
Guys,
Can you let me know what do you think of this rom? any customization idea I might integrate in a newer version?
Also let me know if that works for you..
if someone has a 704CE and can test the rom.... I can make another verison for 704 CE if you letme know the driver you need (Use an original rom, install any terminal emulator and run lsmod and post the result, just the loaded module names.)
Thanks.
Memup 704cet
pierrottls31 said:
Guys,
Can you let me know what do you think of this rom? any customization idea I might integrate in a newer version?
Also let me know if that works for you..
if someone has a 704CE and can test the rom.... I can make another verison for 704 CE if you letme know the driver you need (Use an original rom, install any terminal emulator and run lsmod and post the result, just the loaded module names.)
Thanks.
Click to expand...
Click to collapse
CWM not working in the new model send from factort a week ago.
Installs , mas every time goes to cwm e never gets the menu.
Tkanks
cpe1 said:
CWM not working in the new model send from factort a week ago.
Installs , mas every time goes to cwm e never gets the menu.
Tkanks
Click to expand...
Click to collapse
Arf, did you do the "format mode" in live suit? If not try it, latest rom may have a different nand mapping.
Cheers
Memup 704cet
pierrottls31 said:
Arf, did you do the "format mode" in live suit? If not try it, latest rom may have a different nand mapping.
Cheers
Click to expand...
Click to collapse
Tkans for your rapid unser. I already did it (format with suit ) Here is the picture it says after going to cwm e never comes back to the manta menu.
Tks a lot for the help.
Note i just received this tablet 2 days ago from MemUp service/garanty
cpe1 said:
Tkans for your rapid unser. I already did it (format with suit ) Here is the picture it says after going to cwm e never comes back to the manta menu.
Tks a lot for the help.
Note i just received this tablet 2 days ago from MemUp service/garanty
Click to expand...
Click to collapse
2 thing comes to my mind. First, try to restore with the original firmware first, make sure it, works. Then try to reapply the rom ( use the first one i post, i found out the second one is bogus and my tablet is restarting by herself from time to time.
From the screen shot it looks like your tablet doesnot have same nand mapping as mine. Try the first rom and letmme know. Cheers
Memup 704cet
pierrottls31 said:
2 thing comes to my mind. First, try to restore with the original firmware first, make sure it, works. Then try to reapply the rom ( use the first one i post, i found out the second one is bogus and my tablet is restarting by herself from time to time.
From the screen shot it looks like your tablet doesnot have same nand mapping as mine. Try the first rom and letmme know. Cheers
Click to expand...
Click to collapse
Thanks again.
No results not working.
I find this 4.2.2 A13_86VS_M758C1_1305007_20130503 from MANTA that works perfect.
The only thing is donot have CWM.
Link not working
Hi,
The link to download rom isnt working
Fernando Lemos said:
Hi,
The link to download rom isnt working
Click to expand...
Click to collapse
Hi The link has expired.
The new link is here...;
http://ovh.to/ZLaz9e
Will be available for 30 days.
Enjoy.
Question about instalation
Hi again!
I already have CWM installed and rooted the tablet, do i have to do anything before install this rom or is just install over the current rom?
Thanks for the link btw!
Fernando Lemos said:
Hi again!
I already have CWM installed and rooted the tablet, do i have to do anything before install this rom or is just install over the current rom?
Thanks for the link btw!
Click to expand...
Click to collapse
You can read the first post of this thread, basically no problem, you can do it whenever as you have to switch to Bootloader mode.
It will replace your current rom and delete everything you have on the tablet.
Good luck
Can you repost the link please ? Thank you.
imtheyoyo said:
Can you repost the link please ? Thank you.
Click to expand...
Click to collapse
Hi,
Here is the new link: (Sorry for the delay but my provider only share for a max of 30 days... )
http://ovh.to/5guuwGa
Have fun
Thanks !!!!
If you want I can upload it on MEGA and share the link here.
imtheyoyo said:
Thanks !!!!
If you want I can upload it on MEGA and share the link here.
Click to expand...
Click to collapse
Yes please, I do not have access to mega from work, and my home connection is crap...
Very appreciated. Thanks a lot
Cheers
Okay. I do it and when upload finished I post the link here.
merciii
There is the permanent link : 704CET_JB4.2.2_V1.img (560.5 Mo)
Thanks again for your work pierrottls31.
imtheyoyo said:
There is the permanent link : 704CET_JB4.2.2_V1.img (560.5 Mo)
Thanks again for your work pierrottls31.
Click to expand...
Click to collapse
Thanks again for posting the link.
have fun.
salut
you can use the Faaast JB custom rom with the correct driver
Hi, I cannot test this rom on 704CE as I do not have this tablet anymore. Also, this rom is for 704 CET so it will not work on CE. This is a driver issue... so the rom should install fine but you might have no TOuchscreen or no Wifi.....
If you know about replacing a driver in Android, you might want to try it (make sure you have the original rom just in case)
I manage to do this driver thing on my 704 CET tablet and it works well. you can help yourself with this thread:
http://forum.xda-developers.com/showthread.php?p=42274265
you can even use this rom (Fast jelly bean custom rom) and download the needed driver... (For your information, I have tested this fast JB rom on my 704 CET with the appropriate driver and it works fine, and it is super fast) . If you want to know the driver use on your tablet, run a adb shell and type lsmod (You will have a list of loaded/used driver.)
My advice, if you dont know how to use adb command, do not try it.
I hope this will help.
Best regards.
Hey guys, a bit of a newbie at all of this so please bare with me.
I'm looking at using the NExus 7 (2013) as the headunit on my car and to do this I would need OTG as well as Power at the same time through a USB hub.
Seems like the ElementalX1.6 allows this, but would it work on the new nexus 7?
Would I just have to root the device and install elemental on it for it to work?
your help is much appreciated.
Darkshrimp said:
Hey guys, a bit of a newbie at all of this so please bare with me.
I'm looking at using the NExus 7 (2013) as the headunit on my car and to do this I would need OTG as well as Power at the same time through a USB hub.
Seems like the ElementalX1.6 allows this, but would it work on the new nexus 7?
Would I just have to root the device and install elemental on it for it to work?
your help is much appreciated.
Click to expand...
Click to collapse
yes, you need to root. check the Official Development Section, there is a thread on it. I believe 1.7 just included the feature you are asking for.
Since I'm not yet allowed to post weithin dev threads, could somebody post for me stating that keyboard wouldn't pop up in both aosp and Dolphin Browser after flashing elementalx 1.8 beta (see attached log for kernel details I opted for). Thanks in advance and sorry for posting in the 'wrong' thread..
Edit: I'm using Slimbean 4.3.1 rom (oct 13 weekly)
Ænimal said:
Since I'm not yet allowed to post weithin dev threads, could somebody post for me stating that keyboard wouldn't pop up in both aosp and Dolphin Browser after flashing elementalx 1.8 beta (see attached log for kernel details I opted for).
Click to expand...
Click to collapse
It's extremely unlikely that the kernel is responsible.
I'm running ElementalX 1.8 and Slim Bean GIT version (a bit newer than the Oct 13 weekly) and the keyboard works fine.
tni.andro said:
It's extremely unlikely that the kernel is responsible.
I'm running ElementalX 1.8 and Slim Bean GIT version (a bit newer than the Oct 13 weekly) and the keyboard works fine.
Click to expand...
Click to collapse
Well, went back to 1.6 for now and everything's golden. Didn't change anything option-wise, except for the battery life extension feature, obviously. Just thought it would be nice to let dev know, because I really appreciate his work..
Update: Reinstalled ElementalX 1.8 beta with power button to bypass dt2w enabled this time and keyboard is working in all browsers (including 'minimus' as secondary rom - didn't run multirom the first time I tried.) So everything's fine now, thanks.
No problems here with keyboard using AOSP browser, 1.8 ElementalX beta, Carbon ROM 1015 build. I do use swiftkey tablet keyboard though.
[Q&A] [ROM-AOSP] OFFICIAL CM11.0 KFire HD 8.9 (KK 4.4.2) [05/20 AUDIO/CAMERA FIXES]
Q&A for [ROM-AOSP] OFFICIAL CM11.0 KFire HD 8.9 (KK 4.4.2) [05/20 AUDIO/CAMERA FIXES]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
LTE working?
So I searched through the CM 11, CM 10.2 and CM10.1 threads and am curious if LTE works on these ROMs?
Can anyone comment on if LTE works on the current snapshot/nightlies and if there are any LTE related issues? (I saw bluetooth support on 10.1/10.2 had some issues with diff firmware, does CM 11 suffer that as well?)
LTE
The LiquidSmooth ROM has LTE and bluetooth functionality; however there are some problems with video (Netflix, YouTube, etc.).
Upgrading from CM 10.1 to CM11 Clarification (New to this)
Thanks so much for your hard work on this project and others. I have a very stable running 10.1 setup that I just performed last week. I installed just as described and have TWRP 2.6.0.0 and the 2nd boot loader provided for that install. WORKS GREAT!
I wish to now go ahead though and upgrade again to the CM 11, and 4.4.2 etc.. I have read through both threads and still have a couple of questions... First- Do I need to JUST upgrade the TWRP to 2.7.*.*?, and if so what is the best way to do that ie. Run ADB commands again. Or, use something like FlashFly that I have seen used. Or, do I need to also load another new bootloader as well?. I assume if that is the case I would need to just run back through the whole ADB process again to just get to where I can Flash the latest CM release and Gapps.
Sorry if this seems like some basic information, but I am very new to this and am LOVING IT!... And your work Hashcode, as well as all of the other input from other users..
Any assistance would be greatly appreciated..
Thanks in advance!
Flash error
Still cannot quite figure this upgrade out. Seems I have lost ADB now.. When I use the
"fastboot -i 0x1949 flash bootloader kfhd8-u-boot-prod-8.1.4.bin" line I get Target reported max download size of 1006632960 bytes
error: cannot load 'kfhd8-twrp-2.7.0.0-recovery.img' : no error
Lost on this... ARRRRGGGG
---------- Post added at 07:58 PM ---------- Previous post was at 07:35 PM ----------
s I stated earlier the 10.1 install and upgrade went off without a hitch.. Pretty sure I just need to upgrade from 2.6 to 2.7 and then flash the new CM11 package and GAAPS, but I cannot figure out how to upgrade. This is very frustrating indeed.
Oh.. Secret Cynogen Menu for ADB.. LOL
Oh my.. Feeling like the fool. I had not heard of or read about the Developers Menu in Cm til just now. Obviously I know now why ADB was not working... LOL.... Maybe I can get this CM 11 installed now..
GEEEEEEEEEEEEEEEEEEEEEEEZ.
(Solved) Upgrading from CM 10.1 to CM11 Clarification Flash Issue
Ok, so that ONE little tidbit of information about how to activate "developers" menu in CyanogenMod was what was causing me to pull my hair out trying t figure out why I could no longer use ADB script and flash commands after I first installed CM10. That darn simple. That should be included for those of us that are new to doing this. Tap 4 times.....
Oh My... Well, maybe this 10 post limit will be up soon so I can actually start to engage and learn and assist.
Later
jem?
I have a KF 8.9 LTE software 8.5.1
How do Iknow if its a JEM?
tia
cancel
USB OTG Support
This build has been awesome for my KFHD. I bought it just because this was available.
My issue, though, right now, is that I can't get my OTG to work with a USB stick, or with a wireless keyboard/mouse. I have tried with both the ADB enabled and disabled, but no recognition of a device attached. I even double checked it against my Xperia Z3 just to be sure that it wasn't my cable. I have tried multiple apps as well with no luck. So, either, A) I am dumb (quite possible) and am doing something wrong, or B) the support isn't there yet.
I am running cm-11-20150309-NIGHTLY-jem.zip
If I am doing something wrong, please, let me know. Otherwise, are their plans to include it? If I were more linux literate, I would work on it myself, but I just haven't gotten to that level yet.
On a side note, is CM-12 in the works for Jem? Just curious.
Again, thank you so much for all your hard work, this is amazing.
kujo1b09 said:
The LiquidSmooth ROM has LTE and bluetooth functionality; however there are some problems with video (Netflix, YouTube, etc.).
Click to expand...
Click to collapse
And the GPS doesn't work.
Multi users
Is multi users supported on CM11? When I look under Settings > Device the "User" option is missing and as far as I know it should be supported in 4.4. Any way to get this feature working?
Present on mine.
That option is available on my 8.9 Jem. Running the March 30th nightly.
Q&A for [ROM][KITKAT][UNOFFICIAL] Cyanogenmod 11 for SM-T700 16gb
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][KITKAT][UNOFFICIAL] Cyanogenmod 11 for SM-T700 16gb. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
works with the t 705 ???
Can CM11 for SM-T700 use fingerprint lockscreen?
I have a Tab S 8.4 WiFi Edition(SM-T700) and I want to flash a CM11 fot it from here:
http://forum.xda-developers.com/galaxy-tab-s/development/rom-cyanogenmod-11-sm-t700-16gb-t2940737
And I want to ask that if the fingerprint lockscreen ia available or not. Is there anyone who can help?
Sorry for my bad English.
Mic not working
I saw that someone wrote that recorded video has no sound. From what I see, the microphone does not work at all, but I tested it only with Skype. I wonder if there is a chance to repair this problem in the near future?
---------- Post added at 02:11 ---------- Previous post was at 01:49 ----------
samszehonam263d said:
And I want to ask that if the fingerprint lockscreen ia available or not.
Click to expand...
Click to collapse
Hi samszehonam263d,
I'm afraid not. Fingerprint scanner is not working in this ROM and rather I would not expect that it will be in the near future.
Thank you so much for taking on development for this device.
So far, one thing I've noticed is that when I try to access Language and Input in settings, settings crashes on me
Question to [ROM][KITKAT][UNOFFICIAL] Cyanogenmod 11 for SM-T700 16gb
Does this unofficial ROM version not support mounting volumes? I try to use encfs to mount an encrypted drive (it uses "FUSE"), but it only reponds to me : "mount failed".
Does someone have any idea?
what are the differences between this custom room http://forum.xda-developers.com/galaxy-tab-s/orig-development/unofficial-cyanogenmod-11-android-4-4-4-t2835170 ?
The last build from he 20th november, does not support the camera.
The latest rom (from the 21st november) works great for me
All works right out of the box (even the camera, seems to be fixed right now) and most important really fast and responsible!
I believe I can tell that all of us are really thankful for the work you made and the astounding efforts you have taken until now!
There is just one thing that should be tweaked: "heating"! The tablet itself is getting much hotter running the latest custom rom than the stock TouchWiz. Maybe therefore the battery drain is increased. I am not considered myself as an kernel hacker but I think there is a problem hidden. (Clockspeed, dynamic, static, min, max and or arm.bigLittle, gpu maybe also --> the heat comes definitely from the SoC!)
I am using the build from the 24th, if I download an apk from a website, when I tap on the download complete notification, it doesn't do anything. I have enabled unknown sources. I am able to install the apk if I open my Download folder in ES file explorer and then tap on the apk there. Opening the downloads app and clicking on the apk also does nothing.
Anyone else seeing this?
Tablet dont charge the battery when its turned off. When you turn off the tablet and put USB cable in they reboot to TWRP.
I have just loaded the latest build and confirm that installing APKs from the notiofications works! Thanks so much for all of your work, you've made this tablet so much better than it was when I got it. I'm starting to learn how to build a rom and hopefully will be helping out soon with your work. Thanks again, well done!
Great Work
I just want to say thank you all who have contributed to this rom I would have returned my Galaxy Tab S if it wasn't for CM11
CWM Error Signature verification failed
Hi,
I'm getting an error when i try to flash using CWM.
Error is below:
E: failed to verify whole-file signature
E: signature verification failed
Installation aborted
My device is Galaxy Tab S 8.4 SM T700 16GB using this ROM version cm-11-20141202-v2-klimtwifi.
Thanks in advance.
odee2004 said:
Hi,
I'm getting an error when i try to flash using CWM.
Error is below:
E: failed to verify whole-file signature
E: signature verification failed
Installation aborted
My device is Galaxy Tab S 8.4 SM T700 16GB using this ROM version cm-11-20141202-v2-klimtwifi.
Thanks in advance.
Click to expand...
Click to collapse
I got this working now.
I copied the recovery image cwm-20140806-UNOFFICIAL-klimtwifi.img to /dev/block/platform/dw_mmc.0/by-name/RECOVERY on my tablet using below script:
dd if=/mnt/extSdCard/recovery.img of=/dev/block/platform/dw_mmc.0/by-name/RECOVERY
Take note that your external sdcard path might be different than mine.
Then after that I was able to recovery boot on CWM.
just wanted to thank baracuda for the awesome port. i would definitely be interested in donating to help get the device so he can be the official CM maintainer.
edit: oh and by the way, using the latest build (cm-11-20141202-v2-klimtwifi.zip) google play sound search was going berzerk and draining the battery. disabled it and everything seems fine now.
Stable
Hi. I'm new in the forum, and have a little experience flashing android devices.
I love my SM T700, however, like most of you, I'm sick of all the bloatware included by Samsung. I want a clean system that allows me to work, but also stable, as I use this device as my daily driver.
My basic questions, for experienced users with this ROM: Would you recommend it for daily use or is it needed to keep updating and losing data frequently? Does the fingerpring scanner for unlock work? What about media support?
Thank you!
Any way to have tap to wake/sleep..i know one is in settings,but it would be nice to have both...also thanks again !!!
Battery issue
So here are some screens of my funky battery issue. Battery discharge is quick, followed by a sudden drop from about 50% to 7 %. I was using Gsam battery monitor but after the sudden drop it loses its info and I get a debug list instead of a graph....
turbodmac said:
So here are some screens of my funky battery issue. Battery discharge is quick, followed by a sudden drop from about 50% to 7 %. I was using Gsam battery monitor but after the sudden drop it loses its info and I get a debug list instead of a graph....
Click to expand...
Click to collapse
Update- i installed a battery calibration app and did a couple drain/charge cycles and all seems to be well now. I no longer have the sudden drop. Very happy with this rom - many many thanks to @Barracuda77777
new to andriod. Want the tablet to turn on and off with engine or power. So what do i need to do?
What kernal/rom do people reccomend. People keep saying timur but hes charging. Anything free?
I bought the 2012 version nexus 7 first but that was so slow!! However there a decent app that allowed me to turn screen off when no power. it doesnt work with 2013 model nexus 7.
So any dummy guides or can anyone help me get the this tablet set up the ideal way!
Timur is the bezt for car use but you'll need to donate ....
goto35 said:
new to andriod. Want the tablet to turn on and off with engine or power. So what do i need to do?
What kernal/rom do people reccomend. People keep saying timur but hes charging. Anything free?
I bought the 2012 version nexus 7 first but that was so slow!! However there a decent app that allowed me to turn screen off when no power. it doesnt work with 2013 model nexus 7.
So any dummy guides or can anyone help me get the this tablet set up the ideal way!
Click to expand...
Click to collapse
I'd cough up the bucks. Don't forget, developers have to eat, have a place to sleep, and pay for electricity to run the hardware they're developing for.
ok so i got a copy of timur rom.
so what do i need to do. do i need to root first before installing?
I'm interested too, and have also heard about others using Timur's rom. But the site looked like it hadn't been updated in a while. What's the latest version, and does he keep it updated with each android release? Like is it using marshmallow? Also, what makes Timur's ROM better than any other? I'm using PureNexus on one and CM13 on another at the moment, and haven't done any setting up for car use yet.
goto35 said:
ok so i got a copy of timur rom.
so what do i need to do. do i need to root first before installing?
Click to expand...
Click to collapse
Yea u need to root unlock and install custom recovery
I would use wugs nexus toolkit
Also need to have ma5ching a android os for the timur kernel ...did you pruchase v3 or v4
---------- Post added at 03:35 AM ---------- Previous post was at 03:35 AM ----------
black_mamba said:
I'm interested too, and have also heard about others using Timur's rom. But the site looked like it hadn't been updated in a while. What's the latest version, and does he keep it updated with each android release? Like is it using marshmallow? Also, what makes Timur's ROM better than any other? I'm using PureNexus on one and CM13 on another at the moment, and haven't done any setting up for car use yet.
Click to expand...
Click to collapse
He has just updated his kernel for marshmallow ...search timur v4
What type of setup do you have? Fixed or removable?
You can achieve most things without Timur's... Currently, I'm using stock rom with ElementalX Kernel and Xposed