I apologize if this has been brought up before, but the data reporting in ICS is almost double what the myverizon app is showing.
Just wondering if the usage shown by Verizon is going to catch up. If not I got a lot more streaming I can do
Sent from my Galaxy Nexus using XDA App
do you have a task killer installed, if so then you may be killing the myverizon tracker their for its not collecting all data
You need to set the data usage to match your billing cycle dates than it should match. I have found that it needs set manually.
Please hit the thanks button if I helped.
Don't know about VZ, but comparing Tmo's website and ICS's data meter, they're almost identical (ICS was a few MB ahead)
The 'Total Data Usage' meter appears to be relatively consistent with my operators readings (Sunrise/Switzerland).
On the other hand, the 'per app' reading appears to be completely off the wall. (See this thread.)
etbrandt2 said:
I apologize if this has been brought up before, but the data reporting in ICS is almost double what the myverizon app is showing.
Just wondering if the usage shown by Verizon is going to catch up. If not I got a lot more streaming I can do
Sent from my Galaxy Nexus using XDA App
Click to expand...
Click to collapse
Measured by your phone. Your carrier's data usage accounting may differ.
My carrier (Unitel, Laos) is reporting me using just over double the data ICS is reporting.
I'm on O2 in the UK and the ICS data is about 85 mb behind the networks calculation ?
Two days ago I was pushing 2GB and now suddenly I have only used 608 MB? How can that be explained?
Has anyone seen their usage suddenly go down for no reason?
I'm in the middle of the billing cycle. I've done nothing to the phone.
Now I've lost all faith in the data usage meter.
GR
GPSRider said:
Two days ago I was pushing 2GB and now suddenly I have only used 608 MB? How can that be explained?
Has anyone seen their usage suddenly go down for no reason?
I'm in the middle of the billing cycle. I've done nothing to the phone.
Now I've lost all faith in the data usage meter.
GR
Click to expand...
Click to collapse
You remember to move the slider to correct date? It doesnt do this by default so it looks like your data usage dropped everytime you go to the data usage section.
Yes, it doesn't matter where the sliders are set, I get the same result.
It appears to have forgotten about one week's worth of data, my first week. I got the phone on the sixth and now it is showing zero data used until the 12th.
My usage cycle is set for 27th-26th, so it doesn't make any sense to me that it would suddenly forget about six days of data.
It's forgotten about the data used on the wifi side before the 12th as well.
Any ideas?
GR
For me the "data usage" on the phone was reporting slightly higher than VZW, but imo that's better than slightly lower!
badassirocz said:
You need to set the data usage to match your billing cycle dates than it should match. I have found that it needs set manually.
Please hit the thanks button if I helped.
Click to expand...
Click to collapse
There is no way to set it manually! If I am wrong please correct me.
GPSRider said:
Two days ago I was pushing 2GB and now suddenly I have only used 608 MB? How can that be explained?
Has anyone seen their usage suddenly go down for no reason?
I'm in the middle of the billing cycle. I've done nothing to the phone.
Now I've lost all faith in the data usage meter.
GR
Click to expand...
Click to collapse
Yes I have experienced the same! I was around 3GB, my phone went completely dead on a Sat night, when I plugged it up in the car and tried to boot it back up it apparently didn't have the juice to boot all the way. I let it charge for a while, booted it, all my SMS tones had been reset and so was my "data usage"!! Sucks!
Well, I have let the battery run down until the phone turned itself off several times, but I hope this is not causing this problem. That would be a pretty significant bug!
When I originally activated my phone, the billing cycle was the 16th of the month to the 15th of the next month. I've since changed accounts and now my cycle is the 26th to 25th.
How can I change the range used?
Hey not exactly sure if you mean this but go to settings>data usage>data usage cycle.
Hope it is what you want to know
Tap the dates in 'Data usage' next to 'Data usage cycle'.
Set it to the first date of your cycle.
thereddog said:
When I originally activated my phone, the billing cycle was the 16th of the month to the 15th of the next month. I've since changed accounts and now my cycle is the 26th to 25th.
How can I change the range used?
Click to expand...
Click to collapse
Just in case others get here from googling as I did. The way to fix the change date issue is making sure you have data enabled and WiFi off. At least that how I finally had access to change the cycle.
So go into settings make sure WiFi is off and then go to data usage and select data cycle dates and it should drop down under the dates and with a change data cycle.
jetbruceli said:
Just in case others get here from googling as I did. The way to fix the change date issue is making sure you have data enabled and WiFi off. At least that how I finally had access to change the cycle.
So go into settings make sure WiFi is off and then go to data usage and select data cycle dates and it should drop down under the dates and with a change data cycle.
Click to expand...
Click to collapse
Is ther any possibility to do this in Lollopop ? Can't find any
hey guys,
I got some issues with data usage, cycle, and graphs. i was wondering if anyone knows the answers to these questions of course without using another app or rom's data usage.
1) I was wondering if we can set the white lines to show the billing cycle (1 month) by default instead of the last 7 days only? I have to scroll back everytime to check.
2) my data usage reset on me a couple of times without me doing anything. Im not sure whats causing that, but i do have a theory that there is a "lag" of when you set your cycle and when the resets happen.
So if you initially have set on the 15th, then you change to the 1st.
And if its the 13th today. I think there is a reset on the 15th, then it goes to your new billing cycle.
This is just a theory, im not 100% sure. Can someone verify this?
If this is true, how can i make it instant instead of the delay?
Ive always found the stock data counter unreliable. Plus flashing and messing around info gets lost. I found 3g watchdog worked the best, it saves all your info when you backup(titanium or whatever). If data counting is something you need, definitely get that. It can be complicated looking at first but once you figure it out, flawless. Plus out of all the apps I've tested, it was the most accurate.
Xda T989
I'm trying to display the monthly data usage beginning with the 15th -> #NTMTHM15#
So now it should show the usage from the last 2 weeks, instead it shows only the last 24 hours.
Is it a bug in Zooper Widget or am I doing something wrong?
[Edit]
It actually shows the data usage for the current month (not the last 24hours as presumed)...
Hi, I'm trying to create a widget/progress bar to show weekly cellular data usage. The built-in fields can give me my Monthly data usage just fine, by using #NTMTHM29# which resets on the 29th of each month. However, I'm going to be moving to a weekly data plan and I'd like to know how I could monitor my weekly data usage. I can see that there is an option to display "Cellular data usage current week" which I assume will reset every Monday, but if my data plan starts say, on a Thursday, how could I cover this?
Any help would be appreciated. Thanks!
OK, I've managed to suss this out. As usual it's quite simple
For anyone who's interested, this is what I've done.....
7 rich text modules (one for each day of the week)
Let's say your weekly data allowance starts every Thursday....
Your 'Thursday' module would be:
$#DE#=Thu?#NTMTH1#$
This is saying "If today is Thursday, show me today's cellular data usage."
Your 'Friday' module would be:
$#DE#=Fri?#NTMTH2#$
Which says "If today is Friday, then show me the last 2 days' worth of data usage."
and so on, until you get to Wednesday which will show the last 7 days. Then the whole process starts again on Thursday and the data usage starts again.
There will only ever be one module that displays, as only one has met its' condition (i.e. the day of the week), all the others will show nothing. Works perfectly.
Dead easy to put into a progress bar too for a visual indicator.