Hi there,
i rooted my G3 using Towelroot and all worked fine.
Today i installed the actual Version Xposed Framework and after rebooting it entered a Bootloop.
So i tried to Hard Reset my G3 but when i confirm it the Android with the Gaers show up for a second and then my G3 keeps showing the LG Logo for a few Minutes till i disassamble the Battery.
Next step i try is to flash a firmware in Download mode, but i cant get the Drivers to work... =(
Someone have some hints for me?
patrickn2282 said:
Hi there,
i rooted my G3 using Towelroot and all worked fine.
Today i installed the actual Version Xposed Framework and after rebooting it entered a Bootloop.
So i tried to Hard Reset my G3 but when i confirm it the Android with the Gaers show up for a second and then my G3 keeps showing the LG Logo for a few Minutes till i disassamble the Battery.
Next step i try is to flash a firmware in Download mode, but i cant get the Drivers to work... =(
Someone have some hints for me?
Click to expand...
Click to collapse
Have you choosen ART modality?
If i would say "what the hell is that" ... would u slap me?
No.. i dont have chosen that..
Bigger problem is that i dont get any usb driver working for firmware update in Download mode.. =(
OK... i managed to get the drivers working.
But further Problem ist now that im not able to flash anything on my device...
Neither the TOT Method, nor updating with the Original LG Support Tool is working...
Support Tool tells me my Model Number and that my Version is most actual.
If i update anyway it stucks at 4% and tell me it cant connect.
TOT Tool tells me that my Version Number is not correct... but it is..
With the KDZ Update Tool it stucks at 4% like the Original method.
Same problem here
Any one can help us?
Solution
Hi there,
the Problem was my PC...
I was on a Windows 8.1 64bit.
Switched to a Win7-PC and all is working fine.
You should try to use the Original LG cable, or another "Original" Cable and connect it to a USB-Port on the Back of your PC (directly to the Mainboard)
On a blank Win 7:
- I installed the LG PC Suite
- Updated the PC Suite
- Connected my LG in Download Mode
- Let the PC install all drivers,
- Disconnected the Phone
- Downloaded the actual LG Mobile Support Tool
- Let the Support tool do the work
After this i got my first OTA Update and its working like a charme
Hello Community,
Yesterday my G3 stucked in a Bootloop without changing anything. Than I wanted to repair it with the LG PC Suite. This failed with the message "Assert" multiple times. Now it stucks in the download mode. Can I repair it? More important are the files on the G3. Is there a way to get them?
PJF16 said:
Hello Community,
Yesterday my G3 stucked in a Bootloop without changing anything. Than I wanted to repair it with the LG PC Suite. This failed with the message "Assert" multiple times. Now it stucks in the download mode. Can I repair it? More important are the files on the G3. Is there a way to get them?
Click to expand...
Click to collapse
Try this:
1) Remove battery
2) Hold down the power button for 30 seconds with the battery out
3) re-insert battery
4) Try turning it on again.
If that doesn't work, do a hard reset. You can find multiple posts on how to do it. Hope this helped!
Maybe I can help somebody with the same problem. I solved the problem with the following steps:
I setted up a new Windows 7 x64 PC. It must be Windows 7!!! No Windows 8 or other shiny things.
Installed the driver
Flashed a compleltely new firmware (.tot) over the old (!) FlashTool.
Hi guys. First, sorry my poor english. I'm Brazilian.
I make a firmware upgrade from LG PC Suite, 4.4 KK to 5.0 L. Problem is, the upgrade failed, and now my LG G3 are stuck in download mode. I try make this upgrade from LG Flash Tool but the problem persists, 65% appears in the screen of LG G3 a message "ASSERT" and reboot to download mode screen. Help, please?
plyndagos said:
Hi guys. First, sorry my poor english. I'm Brazilian.
I make a firmware upgrade from LG PC Suite, 4.4 KK to 5.0 L. Problem is, the upgrade failed, and now my LG G3 are stuck in download mode. I try make this upgrade from LG Flash Tool but the problem persists, 65% appears in the screen of LG G3 a message "ASSERT" and reboot to download mode screen. Help, please?
Click to expand...
Click to collapse
Although I have never come across this, using this site to download the right KDZ and using this thread to flash that KDZ may solve your problems. There is no harm done in trying this and you can be sure that it is the right file.
LG G3 Boot problems after download mode
Hello!
Sorry revive the topic but it was the only one who found a similar problem, after searching lot on google.
I have a LG G3 D855P. Yesterday he went out and restarted many times, but worked for a short time.
I can use the BoardDiag, but when I restore the D855P20C_00.kdz .kdz, to reach 36%, the cell phone goes off and does not return. I need to take the battery cable, so that it returns to the download screen, but still, to get 36% he goes again. Have made sure that the .kdz file works properly.
I followed the tutorial presented in this video.
/watch?v=gHAA5e2FQbU[
/watch?v=YsGHRKNT8EM
Porfavor guys, I'm desperate.
kernel adiutor. turn off cpu2 and 3. (notice it starts like CPU0,CPU1,CPU2,CPU3) you will thank me later.
let the 2475mhz max speed. set it on boot.
PJF16 said:
Hello Community,
Yesterday my G3 stucked in a Bootloop without changing anything. Than I wanted to repair it with the LG PC Suite. This failed with the message "Assert" multiple times. Now it stucks in the download mode. Can I repair it? More important are the files on the G3. Is there a way to get them?
Click to expand...
Click to collapse
Hello all.
I was charging my lg g3 Singapore version. Suddenly it reboot and cant boot up anymore.
Unrooted. Never install any tweak apps. I try hard reset boot back to same picture as attached. Any solution... I tried download mode cant get to firmware update page. Installed drivers on pc already. With lg pc suite.
So today I wanted to update my LG G3 (D855) 16 Gb model to 6.0 with the flash tool, bcs my phone was very buggy with the lollipop update. I did everything like it was said on a tutorial and downloaded the .kdz file. After starting to flash it I got a problem, maybe a big one even. The flash tool can't connect to my phone anymore and the process is stuck on 19% on the update firmware screen. I haven't unplugged it yes and I am kinda scared to do it. What should I do? I have red that I should maybe change the USB port from 3.0 to 2.0 but I don't know if I should unplug my phone just like that or turn it of for now?
Please help me!
Hi dear forum members
i got lg G3 D855 from friend with no service, WiFi not open and Bluetooth not working
i noticed phone firmware is Marshmallow 6.0 - D858hk double sim type
so i guessed phone is flashed with wrong firmware
am trying to flash again with D855 kdz but computer don't detect the phone
after connect to computer, 3-4 minutes computer show USB not recognized in both download mode or when phone is turned on
can anyone help me plz
best regards