its not that old, maybe 6 months old, about the last 3 times that my battery has nearly fully discharged, its not got all the way to 0% and has been going off at 3% but then when i plug the charger in and turn the tablet back on the battery shows as 0%
i also noticed the other day it was at about 4% battery and i wa son a pool game, the screen started flickering on and off, and then it turned off, not sure if that's just because it was on the very end of the battery, but was still around 4% anyway so should have been ok till 0%?
any ideas if i have something wrong or is it normal?
James
The tablet will shut off once the battery is depleted. Anywhere under 10% is normal. Letting your device run that low is hard on the battery and will reduce its lifespan.
Read this: http://batteryuniversity.com/learn/article/how_to_prolong_lithium_based_batteries
The battery meter is not even remotely as accurate as you expect it to be. Its just an estimate of battery voltage versus how you are using the device. Don't expect it to be accurate to within a few percent, or even 5-10%.
Heck, I've had some devices show a drop of 20-30% and shutoff. Probably just some metering error, and it didn't happen often. But that tells you how inaccurate the meter can be.
As another mentioned, deep cycles are not good for the long term life of Li ion batteries. Charge fully and frequently.
Related
Hi fellas..
Maybe you've noticed the messages I've sent to Unofficial BravoS thread of Coolexe's (http://forum.xda-developers.com/showthread.php?t=1200517&page=51) which is the ROM I use.
The issue is, the battery discharges rapidly. Actually, if you check mV values, it doesn't discharge rapidly, but if you look at percentages, there is a huge inconsistency. I used Battery Monitor Widget to log the battery performances last night, and saw these horrible results:
Code:
2011/09/19|04:59:49|-515mA|37%|3581mV|40.2ºC|1|0
2011/09/19|05:00:51|-465mA|36%|3576mV|40.2ºC|1|0
2011/09/19|05:01:49|-460mA|36%|3576mV|40.2ºC|1|0
2011/09/19|05:02:50|-462mA|35%|3517mV|40.2ºC|1|0
2011/09/19|05:03:49|-477mA|35%|3517mV|40.2ºC|1|0
2011/09/19|05:04:50|-471mA|34%|3449mV|40.3ºC|1|0
2011/09/19|05:06:06|-478mA|0%|3415mV|40.5ºC|1|0
2011/09/19|05:06:08|-478mA|0%|3415mV|40.5ºC|1|0
These are the last lines of the log, before the phone shuts down. As you can see, the phone gone to 0% from 34% in one minute! No low battery warnings or whatsoever..
Funny thing is, this doesn't happen in StarBurst ROM (which is a Froyo based one). Do you reckon this is a GingerBread issue or something? I saw some other people complaining about their phone shutting down at 20% as well.
So, what do you suggest?
when you look at the voltage there isnt that much drain, so its only a displaying problem
wipe battery stats and maybe recalibrate the battery
but first one should fix it
cheers
ps: i just checked, my desire is at 18% with 3.693mV, now you see the differance
crendot said:
when you look at the voltage there isnt that much drain, so its only a displaying problem
wipe battery stats and maybe recalibrate the battery
but first one should fix it
cheers
ps: i just checked, my desire is at 18% with 3.693mV, now you see the differance
Click to expand...
Click to collapse
This is what I've done so far:
Drained battery to 0% (log above) and charged it a little bit while powered off (like 20%). Turned on the phone, and obtained those logs (last lines only):
Code:
2011/09/19|14:41:25|-268mA|10%|3644mV|38.1ºC|1|0
2011/09/19|14:42:25|-267mA|10%|3644mV|38.1ºC|1|0
2011/09/19|14:43:25|-270mA|10%|3644mV|38.1ºC|1|0
2011/09/19|14:44:25|-269mA|9%|3644mV|38.1ºC|1|0
2011/09/19|14:45:25|-267mA|9%|3644mV|38.1ºC|1|0
2011/09/19|14:46:25|-268mA|9%|3644mV|38.1ºC|1|0
2011/09/19|14:47:25|-266mA|8%|3644mV|38.1ºC|1|0
2011/09/19|14:48:25|-267mA|8%|3644mV|38.1ºC|1|0
2011/09/19|14:49:25|-269mA|7%|3640mV|38.0ºC|1|0
2011/09/19|14:50:25|-267mA|7%|3640mV|38.0ºC|1|0
2011/09/19|14:51:25|-266mA|7%|3640mV|38.0ºC|1|0
2011/09/19|14:52:25|-267mA|7%|3640mV|38.0ºC|1|0
2011/09/19|14:53:25|-267mA|6%|3640mV|38.0ºC|1|0
2011/09/19|14:54:25|-267mA|6%|3640mV|38.0ºC|1|0
2011/09/19|14:55:25|-267mA|5%|3635mV|38.0ºC|1|0
2011/09/19|14:56:25|-266mA|5%|3635mV|38.0ºC|1|0
2011/09/19|14:57:25|-267mA|5%|3635mV|38.0ºC|1|0
2011/09/19|14:58:25|-268mA|5%|3635mV|38.0ºC|1|0
2011/09/19|14:59:25|-268mA|4%|3630mV|38.0ºC|1|0
2011/09/19|15:00:25|-319mA|4%|3630mV|38.0ºC|1|0
2011/09/19|15:01:25|-268mA|4%|3630mV|38.0ºC|1|0
2011/09/19|15:02:25|-270mA|3%|3610mV|38.1ºC|1|0
2011/09/19|15:03:25|-269mA|3%|3610mV|38.1ºC|1|0
2011/09/19|15:04:25|-270mA|2%|3586mV|38.1ºC|1|0
2011/09/19|15:05:25|-273mA|2%|3586mV|38.1ºC|1|0
2011/09/19|15:06:25|-273mA|2%|3586mV|38.1ºC|1|0
2011/09/19|15:07:25|-273mA|2%|3586mV|38.1ºC|1|0
2011/09/19|15:08:25|-289mA|1%|3513mV|38.3ºC|1|0
2011/09/19|15:09:25|-290mA|1%|3513mV|38.3ºC|1|0
2011/09/19|15:09:51|-290mA|0%|3464mV|38.3ºC|1|0
It seems more "smooth" discharge now. Right now, I'm charging my phone off; going to turn on phone once it reaches "green light" with charger on, and plug it off once phone booted. Maybe then, it can know what's maximum and minimum.
So far, I tried to charge my phone to full and erase batterystats.bin but, as you can see at the first post, it didn't work well.. On the other hand, the phone charged-discharged only once in this ROM, you think it could be better if I've given a "second chance"?
i dont know much about that "battery calibrating" and reseting stuff, you have to search in the forum
only thing i want to say is, dont do that deep drains!
recharge at least 5%! you kill your battery, lithium-ion batterys get serious damage from deep drains
crendot said:
i dont know much about that "battery calibrating" and reseting stuff, you have to search in the forum
only thing i want to say is, dont do that deep drains!
recharge at least 5%! you kill your battery, lithium-ion batterys get serious damage from deep drains
Click to expand...
Click to collapse
I know, but when phone thinks it's 30% and not warn me, how can I do it?
In order to calibrate the battery meter - FYI the battery itself cannot be calibrated, as Li-Ion batteries have a very low memory compared to old Ni-Cd etc. batteries - you have to go through the following procedure:
1) charge the battery to 100%;
2) let the battery discharge until the phone shuts itself down;
3) plug the wall charger into the phone, boot the phone up then charge the battery to 100% without interruptions.
If the above procedure does not yield the expected results, you can try fully charging the phone (LED showing green) with it completely turned off (after completely draining it). Again, the charging procedure should not be interrupted.
Source: personal experience - had to do this twice after installing new ROMs, as the phone was shutting down at ~14% (working like a charm now).
Regarding the matter of battery wear because of complete discharges, Li-Ion batteries do indeed have a lower cycle count than old-school batteries, but the standard charge/discharge number a Li-Ion battery can take is ~350, so you can't damage the battery pack by doing a full cycle per month (required to keep the battery meter accurate).
Good luck!
TVTV said:
In order to calibrate the battery meter - FYI the battery itself cannot be calibrated, as Li-Ion batteries have a very low memory compared to old Ni-Cd etc. batteries - you have to go through the following procedure:
1) charge the battery to 100%;
2) let the battery discharge until the phone shuts itself down;
3) plug the wall charger into the phone, boot the phone up then charge the battery to 100% without interruptions.
If the above procedure does not yield the expected results, you can try fully charging the phone (LED showing green) with it completely turned off (after completely draining it). Again, the charging procedure should not be interrupted.
Source: personal experience - had to do this twice after installing new ROMs, as the phone was shutting down at ~14% (working like a charm now).
Regarding the matter of battery wear because of complete discharges, Li-Ion batteries do indeed have a lower cycle count than old-school batteries, but the standard charge/discharge number a Li-Ion battery can take is ~350, so you can't damage the battery pack by doing a full cycle per month (required to keep the battery meter accurate).
Good luck!
Click to expand...
Click to collapse
Thanks for your answer...
Today I realized that it my concern was a quick one. Today, I discharged battery to 0 percent, plugged the AC charger while it's OFF and charged it for around 2h22m until Led-green-full; then turned on the phone with charger plugged and plugged it off just after the boot process. After that, I let the phone to discharge (I helped it a little )
I actually saw "Plug your charger" warning this time, and according to Bat. Mon. Widget, it gone down until 13%! If I do compare the mV values with the old ones, I can see that somehow the phone does learn which mV value correspond to which percentage better.
Even though it gone from 13% to 0% in two minutes, it's at least better than 30% to 0%.. Also, when I check the readings after I plugged in, I saw that percentage-voltage matching is slightly higher, showing that the phone now shows lower percentage for the same voltage - which shows that it learns percentage better.
After one or two charge-discharge cycle, I think it'll learn absolute 0
BTW; the battery says 3.4V 1400mAh and my maximum voltage is 4160mV (100%) and minimum is 3415mV (0%). Are these values normal, you think?
PS: What I'd recommend from anyone who loves flashing ROMs as much as I do is: AFTER YOU FLASHED A NEW ROM, CHARGE YOUR BATTERY TO FULL (100%) AND ERASE THE BATTERY STATS. AFTER THIS, NEVER, I SAY, NEVER ERASE YOUR BATTERY STATS FOR LONG TIME IN ORDER FOR YOUR PHONE TO LEARN STATS BETTER! Erase after long time, say 3 months for wear effects to be accounted, but well, I think you should be fine even after you don't do this
Maybe you did already know that, but, well, I learned it hard way
EDIT: Phone shutdown at 13% after this, but I think it'll do better in time..
Can't Calibrate the Widget
I am having a similar issue with my htc aria. Problem is that it gets to about 78% and then won't go any higher. It even shows (in Battery Monitor Widget)
"Discharging" and "AC plugged". I have let it sit plenty long enough to be fully charged and then completely discharged it (until it shut itself down, which was not 0%) and recharged until it reaches 78% again and stops charging. I'm guessing it is so far out of whack that it says I'm at 78% but I am really at 100%.
The widget says to charge to 100% and then drain completely to 0% to calibrate. I can't do either from what I can tell. So what to do?
theGanymedes said:
Today, I discharged battery to 0 percent, plugged the AC charger while it's OFF and charged it for around 2h22m until Led-green-full; then turned on the phone with charger plugged and plugged it off just after the boot process.
Click to expand...
Click to collapse
Quick tip - let the phone charge for another hour or so after the light goes green (when charging it while powered off). I've read that the light goes green at about 95%. It takes another hour for the phone to really charge to 100%. That's because Li-Ion batteries use two stages to charge: a fast one and a slow one. More details here.
Glad i could help.
P.S. - It also took me two complete charge/discharge cycles to fully calibrate my battery meter after switching from FroYo to Gingerbread.
@vkyjackie - Try fully charging the phone while powered off. If it still doesn't fully charge (LED green), then you might have an issue with either the battery pack or the wall charger.
I have a 3900 mAh battery from Mugen. Ive noticed the battery lasts about 30 hours. But I find something very strange. It drains around 96% in just 15 minutes on straight boot after charging every time. In fact, the first 80% of so drains pretty quickly? Ive had it in my phone for about 2 weeks. Has anyone else noticed this or know why this may be happening. Also when at 100%, and i inplug it, goes straight to 98!
Have you done a battery calibration? Get the Battery Calibration app from the play store.
There's some argument as to whether this does anything or not, but have you conditioned the battery? That means letting it drain completely, then charging it continuously till it hits 100% - do that several times.
Its been proven that the app does nothing, which wipes battstats.ini or something
As for conditioning, its been down to around 3% before being charged. Ivehad the battery 2 weeks now.
Lithium Ion batteries have a very steep drain for about the first 15-20% and also slower charging from those levels. Once past that the drain is nearly linear, and then gets very steep at about 3.6v.
You can see it in the graphs here:
http://www.ibt-power.com/Battery_packs/Li_Ion/Lithium_ion_tech.html
Typically the way our devices are designed, they do not charge the battery to 100% full it can actually cause damage to lithium ion based batteries. what happens is the battery is charged to 95%-98% then the device stops the charge and allows the battery to drop to abut 85%-90% and then starts trickling it again. By design the batteris typically drain a little bit fast at the top level.
further more lithium ion batteries survive more recharge cycles if the D0D (depth of discharge) is about 25% remaining.
Basically you battery will last longer by the device not charging to 100% and letting it discharge slightly when in trickle mode, and if you don't let it die completely and charge it when it reaches around 15%-20% left.
-Mr. X- said:
Typically the way our devices are designed, they do not charge the battery to 100% full it can actually cause damage to lithium ion based batteries. what happens is the battery is charged to 95%-98% then the device stops the charge and allows the battery to drop to abut 85%-90% and then starts trickling it again. By design the batteris typically drain a little bit fast at the top level.
further more lithium ion batteries survive more recharge cycles if the D0D (depth of discharge) is about 25% remaining.
Basically you battery will last longer by the device not charging to 100% and letting it discharge slightly when in trickle mode, and if you don't let it die completely and charge it when it reaches around 15%-20% left.
Click to expand...
Click to collapse
Hmm that kind of makes sense. Everyones been telling me to not let it drop to below 35% though cause it 'wears the battery out'. Ive been charging at around 40 cause thats where itd be after a full day at work and such.
Ive been getting concerned though because ive seen screenshots of people getting 31 hours with 7 hours of screen on time.
Im at 62%, 9.5 hours total, 1 hour 7 min screen on. Thats mostly with Wifi on though.
My stock battery used to drop 10% an hour on 4g, and this one dropped ~11% on 4g just now....
mknewman said:
Lithium Ion batteries have a very steep drain for about the first 15-20% and also slower charging from those levels. Once past that the drain is nearly linear, and then gets very steep at about 3.6v.
You can see it in the graphs here:
http://www.ibt-power.com/Battery_packs/Li_Ion/Lithium_ion_tech.html
Click to expand...
Click to collapse
Thanks for the graph!
Sent from my amazing G2x running EaglesBlood and Faux.
Now at 36% And its just sitting off mostly with some light texting
Now 35!
Got a weird feeling the battery is messed up.
Its 3900mah, divide by 650 = 6 hour charge
Its been 6 hours and its at 46% with the phone off so its not using power, and on the wall charger.
Rekzer said:
Its been proven that the app does nothing
Click to expand...
Click to collapse
I haven't heard that before. Got a source for that info?
mayonaise said:
I haven't heard that before. Got a source for that info?
Click to expand...
Click to collapse
http://www.androidcentral.com/wiping-battery-stats-doesnt-improve-battery-life-says-google-engineer
So I've been running some random tests with my battery and usage to try and figure out how this thing maintains charge and such. I'm running rooted stock TW 4.1.1 with Juice Defender.
1. Usually, I charge the phone overnight while I sleep, then when I unplug it, it drops down to 99% immediately. Lately, it's been dropping down to around 96% in 45 minutes of no use then leveling off. This is with a new battery that replaced another one right after the Jellybean upgrade as I thought my battery was busted.
2. I usually get about 12-14 hours with 2.5-3hrs of screen time (I get crappy service where I work and the phone is in airplane mode when not in use, and when in use, it has bad service).
3. This weekend, I didn't charge it over Friday night and let it die Saturday morning. Then I charged it for about 3 hours or so and ended up getting about 34ish hours with 3.5 hours of screen time out of it (using wifi and better network since I'm at home).
4. I charged it overnight last night (about 9 hours) and when I unplugged it, it dropped to 98 immediately, then 30 minutes later it was down to 96 again.
With all that said, I'm thinking that I probably should not be charging my phone overnight at all anymore. The only problem with that is that I don't have enough time in the morning to charge it before work and I can't charge it while at work as I move around all day.
Will I wear my battery down more by not fully charging it and using it throughout the day and only charging it when I can? I've read that battery website that people post constantly where they talk about how the new batteries stop charging after a certain period of time, but if that were the case, why would I get better battery service from only charging for 3 hours then leaving it overnight?
I know there are a million battery threads on here and we probably didn't need another one, but i thought I'd try to create one with a bit more substance than "oh i get 6 hours with 5 hours screen time on such and such a ROM". I'm more interested in the physical methods than the software methods for getting the best out of the battery.
The quick drop off in battery charge is probably partly due to some hysteresis that has already built up. There is a lag time between the voltage demand on the battery and the battery's ability to deliver the required current. Energy is lost during this lag time.
I posted this another forum so I am recycling but it is relevant.
Some general guidelines when charging Li-ion batteries:
A slow charge is preferable because it reduces heat and hysteresis. Heat of any sort decreases the overall life of the battery. Hysteresis reduces the performance of the battery in the discharge state causing a quicker plummet in battery charge from 100%. (NiMH batteries are worse with hysteresis, but Li-ion cells suffer from hysteresis also).
Unplug the charger as soon as possible when the battery is fully charged.
Lithium ion cells however can not tolerate overcharging or overvoltage and the charge should be terminated immediately when the upper voltage limit is reached.
Click to expand...
Click to collapse
Do not use charging pads or mats as they introduce more heat.
Pulse chargers do the best job because they give the battery brief rest periods to allow the chemicals to settle and accept the charge with reduced hysteresis and heat.
A memorable though not quite equivalent phenomenon is the pouring of beer into a glass. Pouring very quickly results in a lot of froth and a small amount of beer at the bottom of the glass. Pouring slowly down the side of the glass or alternatively letting the beer settle till the froth disperses and then topping up allows the glass to be filled completely.
Click to expand...
Click to collapse
Depth of discharge. Consistently letting the battery run down to very low reduces the overall lifetime. It is better to minimize the depth of discharge by topping off when convenient than running it down completely.
Similar to a mechanical device that wears out faster with heavy use, so also does the depth of discharge (DoD) determine the cycle count. The shorter the discharge (low DoD), the longer the battery will last. If at all possible, avoid full discharges and charge the battery more often between uses. Partial discharge on Li-ion is fine; there is no memory and the battery does not need periodic full discharge cycles to prolong life, other than to calibrate the fuel gauge on a smart battery once in a while.
Click to expand...
Click to collapse
Can't yet post direct links
Battery University . Com
mpoweruk . com / chargers . htm
gotcha. so i shouldn't be charging it overnight anymore. thanks for all that other info, too. very useful to know.
So I've noticed some weird battery behavior on my Pixel 2 XL and was wondering if anyone else has noticed this.
I normally like to ;et the battery drain down into 5% or so before plugging it in and letting it charge through to 100%. I started noticing that a full charge would take me nearly 2 hours fully charge. A couple of times last week, I had to step out and the phone was charged approximately 95%. I unplugged the charger and walked to my car (about 5-6 minutes to get to the car) and when I looked at my phone, charge had dropped to 88%. Over the next few days I noticed this kind of excessive drain immediately after unplugging the charger. Aside from this, I still achieve 24+ hrs of battery life on a single charge so I am not sure that it is a HUGE issue, but one I felt shouldn't be happening nonetheless. Last night the same happened - unplugged around 95% and i literally saw the battery indicator go to 93%, 91%, 88% and then stop at 87% in about a minute. I immediately called Google support, shared my screen, and after speaking with the person on the phone - i was told I should definitely RMA, which i did..so I have a replacement coming.
I don't use always on display or always listening and I am extremely good at clearing open apps before I put the screen to sleep. I have noticed this at home, on my wifi as i always need a charge later in the day when I'm home from work. Also, I use the OEM charging wire and brick.
Anyone else notice this ?
I have not noticed battery drain fast after unplugging at full charge level. I would say you probably should RMA the device. Also it is not good to let lithium-ion batteries go down to low levels a lot like that, it will degrade the battery faster. The less you let the battery go down to low levels, the more charge cycles you will have, which means long battery life over time.
raidflex said:
I have not noticed battery drain fast after unplugging at full charge level. I would say you probably should RMA the device. Also it is not good to let lithium-ion batteries go down to low levels a lot like that, it will degrade the battery faster. The less you let the battery go down to low levels, the more charge cycles you will have, which means long battery life over time.
Click to expand...
Click to collapse
I definitely did RMA, it was a painless process.
And I always thought that maximizing the charge of the phone (letting it get low, then charging up) would actually keep the battery healthier as it would reduce the # of times I charged it. Am i way off base with my logic for that?!
Going into my third week with my 2 XL and I haven't seen anything abnormal regarding battery drain.
I do practice the method of unplugging at 85% and plugging back in around 15% (per Accubattery's reco, and other reading done online)....
There's no proof that it helps as suggested, and while I realize that only allows me access to 70% of the battery's charge potential, I'm rarely, if ever, away from a plug for more than half a day.
This theory worked well in my 6P until it got the intermittent BLOD... My battery health was around 84% (via Accubattery) after 17 months of pretty heavy use.
Again, not sure it is solid fact or not, but you could always try it for a month and see if there is any noticeable difference in battery drain.
Thank you for that insight! I will absolutely do some research. You're battery health after 17 months is really impressive. I just switched from a Nexus 6p that was definitely showing signs of wear after 2 years of fairly standard use. I hadn't used accubattery, but I will download it on my new replacement and monitor results.
I will say though, that aside from that slight blip i noticed - the battery (andOS optimization i'm assuming) is amazing. I get through a day plus easily. So, anything I can do to keep that consistent or squeeze more time out of it is a no brainer.
Az Biker said:
Going into my third week with my 2 XL and I haven't seen anything abnormal regarding battery drain.
I do practice the method of unplugging at 85% and plugging back in around 15% (per Accubattery's reco, and other reading done online)....
There's no proof that it helps as suggested, and while I realize that only allows me access to 70% of the battery's charge potential, I'm rarely, if ever, away from a plug for more than half a day.
This theory worked well in my 6P until it got the intermittent BLOD... My battery health was around 84% (via Accubattery) after 17 months of pretty heavy use.
Again, not sure it is solid fact or not, but you could always try it for a month and see if there is any noticeable difference in battery drain.
Click to expand...
Click to collapse
AceKingNYC said:
I definitely did RMA, it was a painless process.
And I always thought that maximizing the charge of the phone (letting it get low, then charging up) would actually keep the battery healthier as it would reduce the # of times I charged it. Am i way off base with my logic for that?!
Click to expand...
Click to collapse
Lithium-ion batteries work on charge cycles and are happier between 50-85% charge levels. You cannot really "overcharge" the battery because the phone will stop charging at 100% and just trickle charge to keep the battery at this level. But unplugging it after full charge defiantly wont hurt. If you keep the battery at higher levels I would't be surprised that you would get 1500+ charge cycl.es out of the phone before any real degradation which should easily get you years of good battery life. I find the battery life on the XL to be awesome and it lasts me throughout the day with still 40% battery life left and that is with pretty heavy usage.
I've noticed that my 2 XL battery drains very fast after full charge, but then settles to acceptable drain rates from about 90%. I'd say it takes less than an hour to drop from 100 to 90% without basically any use. Often I can't even hit 100% when charging. More like 99/98% max. If it does charge to 100%, it stays there for a couple minutes tops, even if just on standby. Which leads me to my next issue...
This prompted me to calibrate my battery which seemed to help somewhat, but I found that I cannot monitor the charge rate when charging while the device is turned off. What is shown is just what "looks like" a full battery charged icon at all times, and the screen does not dim at any point during charge. It actually seems that the phone is frozen during charging when turned off, and needs a very long power button press to turn the phone on. I actually have two Pixel 2 XLs in front of me and they both do this! Is this a known issue?
In general I am getting 5-6 hours screen-on time per charge which seems about right from what I've read. But that initial fast drain and "freezing" while charging when turned off is puzzling. Any common experiences or insight?
nobaddreams said:
I've noticed that my 2 XL battery drains very fast after full charge, but then settles to acceptable drain rates from about 90%. I'd say it takes less than an hour to drop from 100 to 90% without basically any use. Often I can't even hit 100% when charging. More like 99/98% max. If it does charge to 100%, it stays there for a couple minutes tops, even if just on standby. Which leads me to my next issue...
This prompted me to calibrate my battery which seemed to help somewhat, but I found that I cannot monitor the charge rate when charging while the device is turned off. What is shown is just what "looks like" a full battery charged icon at all times, and the screen does not dim at any point during charge. It actually seems that the phone is frozen during charging when turned off, and needs a very long power button press to turn the phone on. I actually have two Pixel 2 XLs in front of me and they both do this! Is this a known issue?
In general I am getting 5-6 hours screen-on time per charge which seems about right from what I've read. But that initial fast drain and "freezing" while charging when turned off is puzzling. Any common experiences or insight?
Click to expand...
Click to collapse
It may be that the battery is not fully charged when the phone is telling you it is 100%. When using Accubattery to manually benchmark the battery, I found that my phones were still taking a low charge current (as measured by AB) for 45 minutes to sometimes even one hour after the phone was reading 100%. AB will register 100% when the phone's charging circuit cuts off to zero (and notify you). Using AB for a while will also give you a very close approximation of the remaining capacity of your battery relative to a new battery. When my 2XL was new, I was getting just over 100% (~103%). A year later, it is in the high 90's.
Thanks for the tip on Accubattery. I am going to give that a try for a while. So have you been charging up to 100% regularly in spite of what's recommended by this app?
nobaddreams said:
Thanks for the tip on Accubattery. I am going to give that a try for a while. So have you been charging up to 100% regularly in spite of what's recommended by this app?
Click to expand...
Click to collapse
Yes, I turn the 80% alarm crap off and leave it on the charger all night. It is fully charged before I go to bed but I leave it on the charger all night. I use AB for bench marking my battery's capacity and it's real good at that... if you start from when AB says your battery is full. You will see it converge to a % capacity after only 2-3 full discharges. I'm just guessing but I think you are not completely filling the battery to it's full capacity. At least using AB for a while will a) provide you with your battery's true capacity wrt a new battery, and b) will rule out you not charging up fully as your mystery 100-90% quick-drop. Please do report back. :good: