Develop Bugs

CM 10.2 for Canadian Optimus G (E973/E971)

Hi, This is a continuation of the CM 10.1 nightlies thread. Things has been moving on and we are now at CM 10.2. I have been working with xboxfanj, houstonn and bbelos to bring you this. Again, this is based on mako with adapted change for optimus G. This time we are even more in sync with CAF (Code Aurora Forum).
What is working
Everything.
What is not working
You tell me.
Here are the repo needed for our devices :
https://github.com/TeamPlaceHolder
Of course, you have to be rooted, to have bootloader unlocked and a working recovery to flash this custom rom.
DO NOT FLASH NEXUS 4 KENEL MADE BY 3rd PARTY. THIS WILL MOSTLY PERMA BRICK YOUR DEVICE.
This is simply because people tend to use partition number and not by-name and our partition is different than nexus 4 ones. i.e. The rpm partition on our phone is the boot partition on nexus 4. So flashing a custom kernel will flash a boot.img in your rpm partition and then you are bricked. You have been warned.
Like usually, i can't be hold responsible if you damage your phone during any of the process described in this thread.
Thanks :
Thracky and houstonn who also works with me on this.
xplodwild
codeworkx
IOMonster
sk8erwitskil
faux123
dvhexer
Cyanogenmod Team
and a special thanks to shelnutt2 who shown me how to fix 3G
and juggie who found out the good file to change to get wifi working

Download
All the downloads will go here :
ribs.bbqdroid.org
Use geeb package
Gapps package :
http://goo.im/gapps
Modem :
There is a newer modem now available (From JB update. Houstonn and I extracted each of them and made flashable so you don't need to do the painful process of kdz only to get a new baseband)
MAKE SURE TO NOT FLASH KOREAN MODEM.
http://downloads.codefi.re/houstonn/lgog/modem

How to intall that rom ?
This require you to have TWRP or CWM already installed on your device. I recommand the former. On our device, this mainly mean you have rooted your phone and unlocked the bootloader.
Apparently, it seems these instruction where not clear enough. So I'll try to make them dumbproof. If you are not following these instruction and it doesnt work, dont expect support. It's like buying a cake mix where you only need to add milk and call the company saying their product is bull****, you added water and only got a brick. To add to this metaphor, Asking if it's because you used CWM instead of twrp or reverse is like saying : Did it didnt work because i used a fork instead of a whip to mix it ?
To flash this rom, you have to be on older Bootloader. You can alternatively flash the bootloader i linked in this thread. Read the post carefully before you flash.
Download file in the download section.
Put the rom AND the gapps on your internal SDCard.
Reboot into recovery.
Flash CM rom.
Flash Gapps package.
DO A FACTORY RESET (EMPHASIS HERE)
reboot into system

Thos would work on the E971 from Rogers also? Im able to run ATT kernels and roms just like Telus E973, so i think it should be fine?

Voted as Newsworhty Thread. Great work so far chadouming!

theMaDHakkeR said:
Thos would work on the E971 from Rogers also? Im able to run ATT kernels and roms just like Telus E973, so i think it should be fine?
Click to expand...
Click to collapse
I have not tested on E971 and can't test as i dont have one. If you want to test, make sure you have a backup.

Just voicing my support, thanks for your hard work in getting the ball rolling.

This is awesome news. Very exciting. Just a stupid question. Would the ics lockscreen.apk work on this jb build?
Thks
Sent from my LG-E973 using xda app-developers app

gentledroid17 said:
This is awesome news. Very exciting. Just a stupid question. Would the ics lockscreen.apk work on this jb build?
Thks
Sent from my LG-E973 using xda app-developers app
Click to expand...
Click to collapse
I don't think so, but I am not sure.
Sent from my Nexus 4 using xda premium

Is there ANY WAY you can add to this the changes in faux123's Nexus 4 kernel (see here http://rootzwiki.com/topic/36722-kernellinux-340-makojbuvoctuncifsv001-nov-30/#entry1032460) to reduce the horrible msm_hsic_host wakelock battery drain?

brunes said:
Is there ANY WAY you can add to this the changes in faux123's Nexus 4 kernel (see here http://rootzwiki.com/topic/36722-kernellinux-340-makojbuvoctuncifsv001-nov-30/#entry1032460) to reduce the horrible msm_hsic_host wakelock battery drain?
Click to expand...
Click to collapse
You sir, deserve a punch in the face. Come on. We are not at optimizing things. I'm still trying to figure out what is working or not. This is really stupid.
Note to all other user : I WILL NOT ACCEPT FEATURE BEFORE EVERY PROBLEMS HAVE BEEN SOLVED.
on a related note to your question, if you would have read carefully, you would have seen that i already use faux123 kernel . . .
Anyway, this is not going to be the case soon.

Great work, OP. Can't wait for this build to run smoothly so we can have more fun with our phones.

Only want to add that the work on going to be able to actually build the rom easily is going good !

We've got it successfully building now, just testing our first experiment, then the real work can begin

thracky said:
We've got it successfully building now, just testing our first experiment, then the real work can begin
Click to expand...
Click to collapse
Yup, thracky and me now have a working environement. Working on source problem should begin soon !

This is fantastic! Thanks for the hard work guys. I am using a Bell E973, let me know if I can provide you with any files or information. I believe the phones are the same but I am not 100% sure.

One good news, i was able to make the phone boot from our rom !

Thanks for keeping us up to date.

Just here to profess my support for this development. I can't wait to have this running on my phone, Good job team!

I think I have to buy one now. Is it planned to have this as an officially supported device?
Sent from my GT-I9100 using Tapatalk 2

Custom kitkat roms

Hello all.
I see there are already some custom kitkat roms based on the stock kitkat for optimus g f180.
Here is the very stock kitkat rom provided by paulicat on the andoid development. It is good and battery life is awesome, as stock usually is, but there arent a lot of features.
Link to the thread: http://forum.xda-developers.com/showthread.php?t=2760328
(Thanks paulicat)
Here is the VDT superlite lg rom provided by brontok including nice install instructions for the rom.
http://www.filedropper.com/vdt-v20superlitelgg
(Thanks brontok)
roscatel said:
VDT v21 drive mirror
The kernel has been rebuilded with some optimizations (based on official sources), network speed statusbar added, and some audio effects.
Don't forget to flash proper patch and then 10h modem
later edit: G3 toggles as default for those of you that can't get it work.
Click to expand...
Click to collapse
Thanks roscatel!
And here is sling rom 2.0 from lgviet, it has many features, such as guest mode, slide aside and cool lockscreen effects, inclunding the "ocean" effect from lg g flex. It homewer doesnt have knock code or knock on. It does have the knock off which is nice
Battery life is almost as good as stock kk.
Lgviet thread:
http://lgviet.com/forum/threads/kitkat-4-4-2-sling-g-f180-v2-0-blueberry-lgviet-com.19093/
Sling DOWNLOAD FOR E975: https://docs.google.com/file/d/0B9PzP3TCsmt1VnNVSUJPSVdEaTQ/preview?pli=1
(Thanks roscatel)
Sling rom 2.1! Knock code added.( Only working if you press power button first.)
I dont have the full changelog yet but there should be more features added too.
Download:
mirror 1: https://drive.google.com/file/d/0B3K_1FtY2fy0TDFKTFQwc0F6Mk0/preview?pli=1
Thanks umair!
Mirror 2: https://drive.google.com/file/d/0B-bJnoATtPpOZmtyWTBXLW9hT00/preview?pli=1
Thanks roscatel!
furkandeger said:
For those who are on Sling 2.0 and want to switch to Sling 2.1, I've made an update package. Just flash it through cwm and you'll be good to go. No need to wipe anything.
http://www.mediafire.com/?918m8ppl1ld9ud0
Click to expand...
Click to collapse
Thanks furkandeger!
Here is lucky rom from lgviet.com (thanks Ahmed Xperia P)
http://lgviet.com/forum/threads/lucky-rom-v1-4-4-2-kitkat.21187/
Please share your experiences on different roms, all screenshots and links and other discussion is welcome.
AND IF I FORGOT TO CREDIT SOMEONE PLS PM ME AND I WILL GIVE YOU CREDIT. I DID NOT MAKE THESE ROMS. I AM A NOOB AND I ONLY WANT TO MAKE IT EASIER FOR PEOPLE TO FIND KITKAT STOCK ROMS.
Sent from my overheated phone while browsing cat pictures

Using the sling rom on my e975, haven't used it enough to give feedback on battery....
But heres some screenies
The first two hours I was using this rom, it felt very slow in animations, keyboard and such, but now that it has been running over the night and had a reboot aswell, its really snappy and responsive!
Sent from my LG-E975 using XDA Free mobile app

I am also on sling rom , very good rom , no korean language or bloatware etc . Battery timings is very impressive

steffenbakke said:
Using the sling rom on my e975, haven't used it enough to give feedback on battery....
But heres some screenies
The first two hours I was using this rom, it felt very slow in animations, keyboard and such, but now that it has been running over the night and had a reboot aswell, its really snappy and responsive!
Sent from my LG-E975 using XDA Free mobile app
Click to expand...
Click to collapse
Ahmed Xperia p said:
I am also on sling rom , very good rom , no korean language or bloatware etc . Battery timings is very impressive
Click to expand...
Click to collapse
can you guys please tell me how
you did make sling rom works with E975

AL_IRAQI said:
can you guys please tell me how
you did make sling rom works with E975
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2762171

Yeah Sling v 2.0 is really smooth and battery life is much more longer than 4.1.2 everything work fine 3G ,2G ,WIFI ,WIFI Tether is good to go . I don't have any lagging in this ROM

VocaloidBoy said:
Yeah Sling v 2.0 is really smooth and battery life is much more longer than 4.1.2 everything work fine 3G ,2G ,WIFI ,WIFI Tether is good to go . I don't have any lagging in this ROM
Click to expand...
Click to collapse
Only miss is option for data roaming...
Sent from my LG-E975 using XDA Free mobile app

alluebin said:
This is one rom that has some features such as lockscreen effects, but i havent tried it yet, as i am not sure if it works on e975.
http://bbs.gfan.com/forum.php?mod=v...=page=1&filter=typeid&typeid=6880&typeid=6880
Click to expand...
Click to collapse
Looking at screenshots, it appears to be the Sling ROM...

kt-Froggy said:
Looking at screenshots, it appears to be the Sling ROM...
Click to expand...
Click to collapse
Oh it appears to be so, could it be a chinese version of it or something?
But thanks for pointing it out, i will edit op
Sent from my overheated phone while browsing cat pictures

VocaloidBoy said:
Yeah Sling v 2.0 is really smooth and battery life is much more longer than 4.1.2 everything work fine 3G ,2G ,WIFI ,WIFI Tether is good to go . I don't have any lagging in this ROM
Click to expand...
Click to collapse
So how do you guys Install the sling rom from lgviet? Do you flash a patch or something? And if you do, Which patch is it? Im asking because I couldnt get it to boot past the lg logo. I flashed only the rom in lgviet. I have an e975. Thanks for help
Sent from my HTCSensation using XDA Free mobile app

alluebin said:
So how do you guys Install the sling rom from lgviet? Do you flash a patch or something? And if you do, Which patch is it? Im asking because I couldnt get it to boot past the lg logo. I flashed only the rom in lgviet. I have an e975. Thanks for help
Sent from my HTCSensation using XDA Free mobile app
Click to expand...
Click to collapse
I've flashed it over europe10h with no problem (E975 also)

roscatel said:
I've flashed it over europe10h with no problem (E975 also)
Click to expand...
Click to collapse
Okay, could you possibly give me the link that you downloaded it from? It could be a bad download for me. And also i flashed it over the stock kitkat by pauli.
Heres how i flashed:
(Twrp) format data n caches
Flash sling
Flash supersu (unneeded?)
Format data n caches again.
Could it be that i would have had to format system too? How did u flash?
Sent from my overheated phone while browsing cat pictures

alluebin said:
Okay, could you possibly give me the link that you downloaded it from? It could be a bad download for me. And also i flashed it over the stock kitkat by pauli.
Heres how i flashed:
(Twrp) format data n caches
Flash sling
Flash supersu (unneeded?)
Format data n caches again.
Could it be that i would have had to format system too? How did u flash?
Sent from my overheated phone while browsing cat pictures
Click to expand...
Click to collapse
Download

roscatel said:
Download
Click to expand...
Click to collapse
Thanks a bunch. I will try this. This could work as the previous file that i downloaded was bout 800mb, and your file was over 1gb so i might have downloaded a wrong file at the first place.
It works!!? but does this rom have knock code or knockon? How to activate it?
Sent from my overheated phone while browsing cat pictures

alluebin said:
Thanks a bunch. I will try this. This could work as the previous file that i downloaded was bout 800mb, and your file was over 1gb so i might have downloaded a wrong file at the first place.
It works!!? but does this rom have knock code or knockon? How to activate it?
Sent from my overheated phone while browsing cat pictures
Click to expand...
Click to collapse
Only knock off unfortunately

roscatel said:
Only knock off unfortunately
Click to expand...
Click to collapse
Okay, thats something atleast I hope we will get more features in the future. Can I put your download link to the op? As it is the one that works
Sent from my overheated phone while browsing cat pictures

alluebin said:
Okay, thats something atleast I hope we will get more features in the future. Can I put your download link to the op? As it is the one that works
Sent from my overheated phone while browsing cat pictures
Click to expand...
Click to collapse
Yes ofc. Sling is the fastest and less bloated so everybody should be greatfully using it.

Okay updated op with credits and links
Sent from my overheated phone while browsing cat pictures

Hi,
I'm using the first kitkat available here in the forum (4.4 rom.zip) and have a strage feature/problem.
When I receive a call is I Don't answer or reject in 10/15 seconds, the call is answered automatically...
Anyone with same "problem "? Any way to disable it?
Sent from my Sony Tablet S using Tapatalk

rimsilva said:
Hi,
I'm using the first kitkat available here in the forum (4.4 rom.zip) and have a strage feature/problem.
When I receive a call is I Don't answer or reject in 10/15 seconds, the call is answered automatically...
Anyone with same "problem "? Any way to disable it?
Sent from my Sony Tablet S using Tapatalk
Click to expand...
Click to collapse
Try disabling smart answer
Sent from my overheated phone while browsing cat pictures

Aosp 4.4.4 test [e975]

Hi! I compiled clean AOSP for E975 but I can't test it right now:/ I bought this phone but I must wait about 2-3 weeks to get it.
I would be grateful if someone can test it for me
Download:
http://hubdroid.com/~DevSwift/

DevSwift1 said:
Hi! I compiled clean AOSP for E975 but I can't test it right now:/ I bought this phone but I must wait about 2-3 weeks to get it.
I would be grateful if someone can test it for me
Download:
http://hubdroid.com/~DevSwift/
Click to expand...
Click to collapse
based on what kernel?

hasan4791 said:
based on what kernel?
Click to expand...
Click to collapse
based on caf (cm11) kernel

DevSwift1 said:
based on caf (cm11) kernel
Click to expand...
Click to collapse
No one? Ill give it a try tonight then.

DevSwift1 said:
Hi! I compiled clean AOSP for E975 but I can't test it right now:/ I bought this phone but I must wait about 2-3 weeks to get it.
I would be grateful if someone can test it for me
Download:
http://hubdroid.com/~DevSwift/
Click to expand...
Click to collapse
Nice to see you here mate, when i saw your name for the first time here i was like "i remember this name, he was an xperia u/p developer if i'm correct", and i was correct
I've tried your rom, it flashes without problems but it doesn't boot at all.
Here's a logcat i've taken : http://pastebin.com/u7gJgDYJ
I don't know much about building/compiling roms because i'm mostly a kernel developer (i sadly have my own limits even with that), if you need some help you better ask to @Kevinjoa, he's very experienced with this device and also a friendly guy

Loller79 said:
Nice to see you here mate, when i saw your name for the first time here i was like "i remember this name, he was an xperia u/p developer if i'm correct", and i was correct
I've tried your rom, it flashes without problems but it doesn't boot at all.
Here's a logcat i've taken : http://pastebin.com/u7gJgDYJ
I don't know much about building/compiling roms because i'm mostly a kernel developer (i sadly have my own limits even with that), if you need some help you better ask to @Kevinjoa, he's very experienced with this device and also a friendly guy
Click to expand...
Click to collapse
ok thx for test. I will wait for phone and then I will start work on it

Thank you so much loller, I felt so rude that I didn't download this ROM and provide feedback. @DevSwift1 welcome to LGOG community and sorry, I simply did not have time to test your ROM this week.

Loller79 said:
Nice to see you here mate, when i saw your name for the first time here i was like "i remember this name, he was an xperia u/p developer if i'm correct", and i was correct
I've tried your rom, it flashes without problems but it doesn't boot at all.
Here's a logcat i've taken : http://pastebin.com/u7gJgDYJ
I don't know much about building/compiling roms because i'm mostly a kernel developer (i sadly have my own limits even with that), if you need some help you better ask to @Kevinjoa, he's very experienced with this device and also a friendly guy
Click to expand...
Click to collapse
Was about to report back and someone already gave logcat:V damn you're fast dude.

[FIX][Oversharpening][All Variants] Stock kernel with oversharpening fix.

Many of you know exactly what "oversharpening" is... for those who not, just google "g3 oversharpening" or check this article.
After hours spent trying almost everything i finally managed to remove that. Check in the 2nd thread to see the difference.
Here you go... just flash the kernel in recovery but remember to make a backup of the boot partition before, just in case it will not works.
Remember... the only weird thing is that you have to turn off the screen and then on again to make it works. Just the 1st time after the boot.
DOWNLOADS:
D855 Kitkat Lollipop
D851 Kitkat
D850 Kitkat
LS990 Kitkat
F400 Kitkat
VS985 Kitkat
D852 Kitkat
Of course, tell me what you think.
Like always... DONATIONS are wellcome!!!
Lollipop Source
Kitkat Source
tnx to @Tectas for the kernel source

Skin1980 said:
Many of you know exactly what "oversharpening" is... for those who not, just google "g3 oversharpening" or check this article.
After hours spent trying almost everything i finally managed to remove that. Check in the 2nd thread to see the difference.
Here you go... just flash the kernel in recovery but remember to make a backup of the boot partition before, just in case it will not works.
Remember... the only weird thing is that you have to turn off the screen and then on again to make it works. Just the 1st time after the boot.
DOWNLOADS:
D855 Kitkat Lollipop
D851 Kitkat
D850 Kitkat
LS990 Kitkat
F400 Kitkat
VS985 Kitkat
D852 Kitkat
Of course, tell me what you think.
Like always... DONATIONS are wellcome!!!
Click to expand...
Click to collapse
Screenshots?

o0radryan0o said:
Screenshots?
Click to expand...
Click to collapse
Screenshot will not have sharpening... you must check with your eyes

Flashing right now. Will confirm in a bit.

THIS WORKS! OMG, I haven't been this excited since sliced bread!
Proof: https://drive.google.com/file/d/0B1jEsAgOSJx3TDRYNXRzUXprSkU/view?usp=sharing (16MB)
https://drive.google.com/file/d/0B1jEsAgOSJx3VWxkTEV4R29veFE/view?usp=sharing (34MB)
Download to view at full resolution. Taken with screen at 100% brightness. You can tell the text is very smooth without any halo.

Works for me
D855
Why is it that the sharpening is still there after boot but it's gone once the display has been off and on?

Delete

MasterThiefGarrett said:
Works for me
D855
Why is it that the sharpening is still there after boot but it's gone once the display has been off and on?
Click to expand...
Click to collapse
Maybe there's a piece of code that needs to be run after the device powers on.

Rockliveson123 said:
Is this only for stock Roms. I am on Mahdi and pretty sure it isn't as over sharpened
Sent from my LG-D851 using XDA Free mobile app
Click to expand...
Click to collapse
read the title of the thread.

Says stock kernel. Doesn't Mahdi still use the stock kernal?
Sent from my LG-D851 using XDA Free mobile app

Rockliveson123 said:
Says stock kernel. Doesn't Mahdi still use the stock kernal?
Sent from my LG-D851 using XDA Free mobile app
Click to expand...
Click to collapse
Mahdi rom is aosp based. That's not stock lg.
Sent from my LG-D851 using XDA Free mobile app

WOW I noticed it instantly when I saw my homescreen wallpaper! Thanks for this

Cloudy rom
Will this work on the cloudy rom since I have the kernel that came with the rom?

tymansdaddy said:
Will this work on the cloudy rom since I have the kernel that came with the rom?
Click to expand...
Click to collapse
Yes

I went ahead and flashed anyway. I had a backup. I'm just waiting for a lollipop t-mobile stock rom. All the 5.0 roms I've tried won't keep signal and they won't read my 128gb memory card. Thanks for your work.
Skin1980 said:
Yes
Click to expand...
Click to collapse
Sent from my LG-D851 using Xparent BlueTapatalk 2

Before it's asked, this won't work on D851 Lollipop until the full version is released from T-Mobile or LG because we need the Lollipop kernel from it. Just wanted to get that out of the way

Thanks for this, don't know what lg was thinking but the screen really shines now

Work on ZoneRom.
Thanks for this.

finally.. thanks! Now we just need some 3rd Party kernels to add this!

mxl180 said:
finally.. thanks! Now we just need some 3rd Party kernels to add this!
Click to expand...
Click to collapse
It was added to the Rin kernel. Latest version 1.8.5 I think.

[rom][geehrc][5.1.0] rastapop+vanilla [15/03/2015] [DISCONTINUE]

/// WHAT IS RASTAPOP
the way @rascarlo want Android
/// WHAT IS VANILLA
pure aosp built from source
RASTAPOP System Details:
Android 5.1.0_r1 LMY47D
build with kevin's kernel.
bugs:
keyboard light not working;
when open flashlight in notification bar SystemUI crashed.
Find one? Let me know.
rom:
google drive
Root:
Supersu
Google Apps:
PA
MOD:
turn on the keyboard light:
Capacitive Buttons
Sources:
rom:https://github.com/rascarlo?tab=repositories
device:device_lge_geehrc
kernel:kernel_msm
Credits:
google for the sources
kevin for new device tree
rascarlo for the great rom

welcome back bro ....
thx for rom ....
how is batery life in rom ?

Anyone want to test a pure aosp 5.1.0 ROM ?

lollipop (15-03-15):
add rastapop 5.1 build.
add vanilla 5.1.0 build.

Any changelog, any bugs? I believe if you update the OP accordingly, more people will install the ROMs.

How difficult would porting this to the e970 be?
Would I be able to use it by just flashing a geeb kernel?

First if you want something you should ask nicely or do it yourself.
This is international thread.
And for your second question I believe so because the only things you guys stay without are camera and SD card an that is kernel related.
Just do a backup first and then try it out with a geeb kernel.

And is because of that kind of people I stopped posting my projects in the community.
crime_of_heart said:
Any changelog, any bugs? I believe if you update the OP accordingly, more people will install the ROMs.
Click to expand...
Click to collapse

guidoido004 said:
And is because of that kind of people I stopped posting my projects in the community.
Click to expand...
Click to collapse
Just share my project with the one like it. That's all I want to do. ☺

guidoido004 said:
And is because of that kind of people I stopped posting my projects in the community.
Click to expand...
Click to collapse
I am developing kernels as well, just check my ops. I always update changelogs etc. It was a friendly suggestion/advice as I wanted to know at least if everything was working or tested. I don"t force anyone...
You should be a bit careful with your words before categorizing people as "this kind of people"
Not nice, especially on XDA.

crime_of_heart said:
I am developing kernels as well, just check my ops. I always update changelogs etc. It was a friendly suggestion/advice as I wanted to know at least if everything was working or tested. I don"t force anyone...
You should be a bit careful with your words before categorizing people as "this kind of people"
Not nice, especially on XDA.
Click to expand...
Click to collapse
XDA isn't what it used to be. There's so much people lazy to test and learn on they own, that I barely answer to anything nowadays.
Tho, if you're developing, and want to know, I bet the dev of this thread has a github, which you can check. As a dev, understand it is a must.
---------- Post added at 03:28 AM ---------- Previous post was at 03:28 AM ----------
JustinXu said:
Just share my project with the one like it. That's all I want to do. ☺
Click to expand...
Click to collapse
Sorry, wasn't to you. Dx

guidoido004 said:
XDA isn't what it used to be. There's so much people lazy to test and learn on they own, that I barely answer to anything nowadays.
Tho, if you're developing, and want to know, I bet the dev of this thread has a github, which you can check. As a dev, understand it is a must.
---------- Post added at 03:28 AM ---------- Previous post was at 03:28 AM ----------
Sorry, wasn't to you. Dx
Click to expand...
Click to collapse
I know, bro. ?

i cant install it it says this is e 975 model abort installation... i cant find latest twrp for my model i have 2.6.3 maybe thats the reason i have Lg G E975 european model 13mp and 32gb unlocked with freegee mako unlock, any solution?

soniccm said:
i cant install it it says this is e 975 model abort installation... i cant find latest twrp for my model i have 2.6.3 maybe thats the reason i have Lg G E975 european model 13mp and 32gb unlocked with freegee mako unlock, any solution?
Click to expand...
Click to collapse
use philz touch recovery or delete first line in updater-script in rom .zip

Is the bug still there?

dadi11 said:
use philz touch recovery or delete first line in updater-script in rom .zip
Click to expand...
Click to collapse
Either with philz touch recovery same error i dont now how to delete this first lines and i dont now where to find that script...lol

is anybody still developing this project ? has anybody successfully install it? it works ? any bugs?

soniccm said:
is anybody still developing this project ? has anybody successfully install it? it works ? any bugs?
Click to expand...
Click to collapse
Yeah, i think its dead. The last update was 9 days ago LOL.
Except for Bluetooth bug (which plagues all roms that use kevs sources) it will run close to perfect.
As with all roms you are curious to try, do a nandroid backup, test rom and if you dont like restore backup..... And read atleast the last 5+ pages thread before asking such questions.

thanx the developer about his time and for sharing his project