Hi, This is a continuation of the CM 10.1 nightlies thread. Things has been moving on and we are now at CM 10.2. I have been working with xboxfanj, houstonn and bbelos to bring you this. Again, this is based on mako with adapted change for optimus G. This time we are even more in sync with CAF (Code Aurora Forum).
What is working
Everything.
What is not working
You tell me.
Here are the repo needed for our devices :
https://github.com/TeamPlaceHolder
Of course, you have to be rooted, to have bootloader unlocked and a working recovery to flash this custom rom.
DO NOT FLASH NEXUS 4 KENEL MADE BY 3rd PARTY. THIS WILL MOSTLY PERMA BRICK YOUR DEVICE.
This is simply because people tend to use partition number and not by-name and our partition is different than nexus 4 ones. i.e. The rpm partition on our phone is the boot partition on nexus 4. So flashing a custom kernel will flash a boot.img in your rpm partition and then you are bricked. You have been warned.
Like usually, i can't be hold responsible if you damage your phone during any of the process described in this thread.
Thanks :
Thracky and houstonn who also works with me on this.
xplodwild
codeworkx
IOMonster
sk8erwitskil
faux123
dvhexer
Cyanogenmod Team
and a special thanks to shelnutt2 who shown me how to fix 3G
and juggie who found out the good file to change to get wifi working
Download
All the downloads will go here :
ribs.bbqdroid.org
Use geeb package
Gapps package :
http://goo.im/gapps
Modem :
There is a newer modem now available (From JB update. Houstonn and I extracted each of them and made flashable so you don't need to do the painful process of kdz only to get a new baseband)
MAKE SURE TO NOT FLASH KOREAN MODEM.
http://downloads.codefi.re/houstonn/lgog/modem
How to intall that rom ?
This require you to have TWRP or CWM already installed on your device. I recommand the former. On our device, this mainly mean you have rooted your phone and unlocked the bootloader.
Apparently, it seems these instruction where not clear enough. So I'll try to make them dumbproof. If you are not following these instruction and it doesnt work, dont expect support. It's like buying a cake mix where you only need to add milk and call the company saying their product is bull****, you added water and only got a brick. To add to this metaphor, Asking if it's because you used CWM instead of twrp or reverse is like saying : Did it didnt work because i used a fork instead of a whip to mix it ?
To flash this rom, you have to be on older Bootloader. You can alternatively flash the bootloader i linked in this thread. Read the post carefully before you flash.
Download file in the download section.
Put the rom AND the gapps on your internal SDCard.
Reboot into recovery.
Flash CM rom.
Flash Gapps package.
DO A FACTORY RESET (EMPHASIS HERE)
reboot into system
Thos would work on the E971 from Rogers also? Im able to run ATT kernels and roms just like Telus E973, so i think it should be fine?
Voted as Newsworhty Thread. Great work so far chadouming!
theMaDHakkeR said:
Thos would work on the E971 from Rogers also? Im able to run ATT kernels and roms just like Telus E973, so i think it should be fine?
Click to expand...
Click to collapse
I have not tested on E971 and can't test as i dont have one. If you want to test, make sure you have a backup.
Just voicing my support, thanks for your hard work in getting the ball rolling.
This is awesome news. Very exciting. Just a stupid question. Would the ics lockscreen.apk work on this jb build?
Thks
Sent from my LG-E973 using xda app-developers app
gentledroid17 said:
This is awesome news. Very exciting. Just a stupid question. Would the ics lockscreen.apk work on this jb build?
Thks
Sent from my LG-E973 using xda app-developers app
Click to expand...
Click to collapse
I don't think so, but I am not sure.
Sent from my Nexus 4 using xda premium
Is there ANY WAY you can add to this the changes in faux123's Nexus 4 kernel (see here http://rootzwiki.com/topic/36722-kernellinux-340-makojbuvoctuncifsv001-nov-30/#entry1032460) to reduce the horrible msm_hsic_host wakelock battery drain?
brunes said:
Is there ANY WAY you can add to this the changes in faux123's Nexus 4 kernel (see here http://rootzwiki.com/topic/36722-kernellinux-340-makojbuvoctuncifsv001-nov-30/#entry1032460) to reduce the horrible msm_hsic_host wakelock battery drain?
Click to expand...
Click to collapse
You sir, deserve a punch in the face. Come on. We are not at optimizing things. I'm still trying to figure out what is working or not. This is really stupid.
Note to all other user : I WILL NOT ACCEPT FEATURE BEFORE EVERY PROBLEMS HAVE BEEN SOLVED.
on a related note to your question, if you would have read carefully, you would have seen that i already use faux123 kernel . . .
Anyway, this is not going to be the case soon.
Great work, OP. Can't wait for this build to run smoothly so we can have more fun with our phones.
Only want to add that the work on going to be able to actually build the rom easily is going good !
We've got it successfully building now, just testing our first experiment, then the real work can begin
thracky said:
We've got it successfully building now, just testing our first experiment, then the real work can begin
Click to expand...
Click to collapse
Yup, thracky and me now have a working environement. Working on source problem should begin soon !
This is fantastic! Thanks for the hard work guys. I am using a Bell E973, let me know if I can provide you with any files or information. I believe the phones are the same but I am not 100% sure.
One good news, i was able to make the phone boot from our rom !
Thanks for keeping us up to date.
Just here to profess my support for this development. I can't wait to have this running on my phone, Good job team!
I think I have to buy one now. Is it planned to have this as an officially supported device?
Sent from my GT-I9100 using Tapatalk 2
Related
http://www.sendspace.com/file/zdq9uo
Working:About everything
Broken:Camera works for some people.
Tweaks:What comes with flexreaper, nothing special added in this version. Next version will have build.prop tweaks and hopefully working camera.
If anyone wants to help with development of roms for the iconia a100 just PM me.
Yesterday, I downloaded both Tabooyay and flexreaper from posts found in the Rom Thread in the General section.
Just curious if the two you have posted here in Development are the same or if you have made modifications within the last 24 hours?
I haven't flashed either yet so I'm just curious. Perhaps you could give each a version number or some other identifier.
The MD5's I get are:
Taboonay_A100.zip >> d16775ad627af91e43045d5a686a976a
Flexreaper_A100.zip >> 6b463663fc008ac2cb7a802c960e195b
MD5's are your friend. First thing to tell people to check if they experience issues.
Land Master said:
Yesterday, I downloaded both Tabooyay and flexreaper from posts found in the Rom Thread in the General section.
Just curious if the two you have posted here in Development are the same or if you have made modifications within the last 24 hours?
I haven't flashed either yet so I'm just curious. Perhaps you could give each a version number or some other identifier.
The MD5's I get are:
Taboonay_A100.zip >> d16775ad627af91e43045d5a686a976a
Flexreaper_A100.zip >> 6b463663fc008ac2cb7a802c960e195b
MD5's are your friend. First thing to tell people to check if they experience issues.
Click to expand...
Click to collapse
They are both the latest version as the ones on the a500 forum
Thanks
Installed it yesterday, works great. Much appreciated.
Does the gold edition work on this ROM
Sent from my SAMSUNG-SGH-I997 using Tapatalk
Thanks guys, broken camera is front or back or both? i am using the A500 version of Flex and the front camera is upside down even during chat and Wifi dies after inactivity (already turned it in settings to not do it)
I will try to push a full compatible build for the a100 based on the a100 ICS leak.
Give me some time and I need testers as I don't have a a100.
civato said:
I will try to push a full compatible build for the a100 based on the a100 ICS leak.
Give me some time and I need testers as I don't have a a100.
Click to expand...
Click to collapse
I am very much looking forward to your A100 release. I'm running Flexreaper now using Zeronulls boot.img. If you need me to test anything, I am willing to do so.
Gibson.Dubs said:
I am very much looking forward to your A100 release. I'm running Flexreaper now using Zeronulls boot.img. If you need me to test anything, I am willing to do so.
Click to expand...
Click to collapse
Where do I get that boot.img , because from what I hear the stock boot.img doesn't got full root ?
civato said:
Where do I get that boot.img , because from what I hear the stock boot.img doesn't got full root ?
Click to expand...
Click to collapse
The stock boot.img is usable. You may just need to re-root the rom when you flash it.
Will upload first release today
EDIT
To the OP , credit to the original rom builder would be great.
I could care less you changing build.prop , but I do care not being recognized.
It takes many hours to build a good custom rom and to mod.
Thanks , civ.
civato said:
Will upload first release today
EDIT
To the OP , credit to the original rom builder would be great.
I could care less you changing build.prop , but I do care not being recognized.
It takes many hours to build a good custom rom and to mod.
Thanks , civ.
Click to expand...
Click to collapse
Sorry about that, noone else had took any offense and I appologize for not giving you credit.
blmvxer said:
Sorry about that, noone else had took any offense and I appologize for not giving you credit.
Click to expand...
Click to collapse
No problem but understand it is all free and for the community so respect is needed.
So again please in your OP you need to refer to the base of the rom , it is even a XDA rule to point to the source.
Thanks.
as for tabooyay not care "[MOD] 2 MicroSD Internal Memory Swap".
otherwise very good ROM prometeur.
good job thanks
Thread closed.
OP was asked to give credit, none was given. If you make a new thread, do so ONLY with giving full credit as to the source of the code..
I have compiled CM9 for the wildfires CDMA and have got it to boot. There is still alot wrong with it but this is taking over the CM7 project i was doing before this. I may go back and get CM7 stable when this is done though, just because I hate leaving things unfinished.
Anyways, so far I have used alot of modpunks folders and kernel and modified them to work with the cdma version of the wildfire s. Its still being worked on heavily however. If you would like to compile the rom, instructions below follow. Of course you will need to have the environment already ready to compile roms.
::::NEW::::
I set out to fix wifi, And in turn I actually fixed a lot of things. Enough that I classify it as a beta, so seeing as that. Download link is below. Please, only report logcats or unknown problems. Thanks
Code:
mkdir ~/cm9
cd ~/cm9
repo init -u git://github.com/simonsimons34/android.git -b ics
repo sync -j12
. build/envsetup.sh
lunch 5
make -j2 bacon
Note this rom doesnt function well but does boot. If you'd like proof a precompiled rom is located here in this folder. I will make them whenever i build a change, and send them off to my testers.
goo.im/devs/simonsimons34/marvelc/cm9
Credits:
Modpunk
Alquez
Jmz
For all Roms please post bugreports here. Dont duplicate them if on is already open. also please use the logcat and please pastebin it. explain how to recreate the problem, as well. Thanks. Without this the rom will never get better
https://github.com/simonsimons34/marvelc_device_cm9/issues/
Release1:
Downloads
For changelog before releases see the following. They are my github commits towards fixing things:
https://github.com/simonsimons34/marvelc_vendor_ics/commits/ics
https://github.com/simonsimons34/marvelc_device_cm9/commits/ics
Release1:
this is all thats broken:
hq video
mms for uscc (vmus works fine)
camcorder (video its in the libs)
Anything else, let us know!
Beta2test2:
Wifi fixed
wifi tether fix attemt (needs conferm)
camera/bt still broken
better HWA added in kernel and rom
Beta1test1:
took a go at fixing wifi and camera, could of made it worse needs testing
changed firmware for wifi
fixed line in buildprop
changed kernel config to try to fix wifi
Beta 1:
What Doesn't Work:
Camera
Bluetooth
Wifi
GPS
HQvideo is buggy (blame non opensource libs)
What Does Work:
Everything Else
unless I got some rotten downloads, neither one of those zips flash. (error 7)
That error 7 would be the recovery your using. I think i can say its not cwm official for cdma, yes?
works fine here when I tested it no mobile data wifi (maybe blue tooth) and no camera I'll test more tomorrow with logcats of everything
Sent from my HTC_A510c using Tapatalk
Good to see that the CDMA users are getting some ICS love
simonsimons34 said:
That error 7 would be the recovery your using. I think i can say its not cwm official for cdma, yes?
Click to expand...
Click to collapse
Yes. I always had trouble with the official. I'll switch today.
Sent from my HTC_A510c using Tapatalk 2
simonsimons34 said:
Anyways, so far I have used alot of modpunks folders and kernel and modified them to work with the cdma version of the wildfire s. Its still being worked on heavily however. If you would like to compile the rom, instructions below follow. Of course you will need to have the environment already ready to compile roms.
Click to expand...
Click to collapse
Why don't you just send me patches so we have just one tree instead of forking? Forking should normally only be the last option. There is a reason why the Liberty and Marvel have a common kernel tree. Less work and everyone gets the fixes.
I just couldn't figure out how to send you anything because of your choice of git sites. All my work is wide open on github so feel free
Sent from my Wildfire S A510c using Tapatalk 2
simonsimons34 said:
I just couldn't figure out how to send you anything because of your choice of git sites.
Click to expand...
Click to collapse
http://git-scm.com/book/en/Distributed-Git-Contributing-to-a-Project
Maybe you should read a git book. Your commit history is a mess and the changes are also not cleanly made.
simonsimons34 said:
All my work is wide open on github so feel free
Click to expand...
Click to collapse
Yes, I've already looked at the mess
modpunk said:
Your commit history is a mess and the changes are also not cleanly made.
...
Yes, I've already looked at the mess
Click to expand...
Click to collapse
Go clean it up then bro
Well I'm happy with my near perfect cm9 so I'll continue this and you yours for GSM? Sounds fair to me
Sent from my Wildfire S A510c using Tapatalk 2
There is no Google Play? I downloaded an .apk for it but wont open. Did i do this wrong, or is it a bug?
Sent from my Wildfire S A510c using XDA
you must install gapps. THIS ROM IS NOT FOR NOOBS YET
Seriously, I can't get this to flash. I've tried multiple recoveries. Official just freezes and the others throw errors. You know I'm not THAT much of a n00b. What is going on?
Sent from my HTC_A510c using Tapatalk 2
BigChillin said:
Seriously, I can't get this to flash. I've tried multiple recoveries. Official just freezes and the others throw errors. You know I'm not THAT much of a n00b. What is going on?
Sent from my HTC_A510c using Tapatalk 2
Click to expand...
Click to collapse
I had issues as well. I flashed clockwork mod through rom manager and then I was finally able to flash the rom.
All I get is freezes and restarts, no matter how I try to flash with this official. It's quite ironic really. Something that will FINALLY get me to shut up, and I can't flash it....
BigChillin said:
All I get is freezes and restarts, no matter how I try to flash with this official. It's quite ironic really. Something that will FINALLY get me to shut up, and I can't flash it....
Click to expand...
Click to collapse
Yeah I used to get a lot of freezes and restarts when I was a noob and did not know what I was doing wrong with the flashing until I figured out it was my recovery. My phone (CDMA) doesn't like CWM version 5.0.2.6 or 5.0.2.8 or whatever those versions are. I am using 4.0.1.5 and things flash fine without restart. I have not tried this ROM and will try it later when I get more time but if it's random restarts during flashing and backups, then change your CWM to version 4.
Hope this helps. If it doesn't, sorry that I misunderstood your problem.
---------- Post added at 05:05 AM ---------- Previous post was at 05:01 AM ----------
One more thing while I'm on this thread, does the phone get recognized as an Android phone under this ROM? I know with Sense 3.5, it didn't and so I could not install Swype Beta and I can't live without swype on this small phone. Thanks to whoever answers this.
BigChillin said:
All I get is freezes and restarts, no matter how I try to flash with this official. It's quite ironic really. Something that will FINALLY get me to shut up, and I can't flash it....
Click to expand...
Click to collapse
Rename the zip file. I've had this with twrp before and shoving a few _s on the end in front of the .zip seemed to work.
If that doesn't work I would normally rebuild but in your case you would re download so try that.
Sent from my HTC Wildfire S A510e using xda premium
Please give thanks to madmack!!
I did nothing to help with this, just bringing it to the people of this forums that want it.
It has working A2DP by pulling some stuff from the 12-26-12 build and implementing them into 1-15-13 and might have some broken features. If anyone finds any broken features then let me know and I'll ad them to this post.
VoIP calling is borked (video chats)
Call Echo is possible to return
His post with the download link, give him a thanks
http://forum.xda-developers.com/showpost.php?p=36804356&postcount=10721
Here are some posts confirming
http://forum.xda-developers.com/showpost.php?p=36842057&postcount=10754
http://forum.xda-developers.com/showpost.php?p=36831201&postcount=10740
(Joe Dirt Voice) DAAANNGG I thought you people would love this haha. Oh well.
mt3g said:
(Joe Dirt Voice) DAAANNGG I thought you people would love this haha. Oh well.
Click to expand...
Click to collapse
Holy crap this is heroic. I'll bet people haven't really noticed... I know I don't look at the general section terribly often but glad I did today. Downloading now. A thousand thanks to you.
No worries. I know people want it cause I posted that I had the old build of 10.1 with working BT and my PM box got flooded with hits.
Report back for folks.
Sent from my SGH-T999 using xda premium
Hey thanks I was wondering when this would show up thanks downloading now
bad ass Baked sg3
mt3g said:
No worries. I know people want it cause I posted that I had the old build of 10.1 with working BT and my PM box got flooded with hits.
Report back for folks.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
A2DP definitely works as expected. Audio is busted in g+ hangouts (think this got fixed in the caf audio stuff that happened in later nightlies). But that's a decent tradeoff. Haven't seen any other issues other than the ones everyone knows about from the regular nightlies- occasional flicker, lag after some games, etc.
How do you install this? Since its ATT, I get an error with CWM6 on my TMO S3.
Is there a version out there for the SGH-T999 (d2tmo)? I'm guessing since this is the d2att version it won't work on the SGH-T999, right? Thanks for fixing this issue.
I've flashed about 7 different att ROMs on my phone without editing anything before flashing. They work fine after unless trying to use something T-Mobile specific, like T-Mobile voicemail. I didn't fix it just brought to t999s attention.
Sent from my SGH-T999 using xda premium
mt3g said:
I've flashed about 7 different att ROMs on my phone without editing anything before flashing. They work fine after unless trying to use something T-Mobile specific, like T-Mobile voicemail. I didn't fix it just brought to t999s attention.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Thank you, this helps. I have the latest experimental build of 10.1, do you know if I will have to wipe my phone or can I just flash it over the existing 10.1 build? Thank you
I would try flashing like this.
Boot into recovery
wipe system
flash A2DP working Cm-10.1 rom
Flash gapps
reboot and test, if it doesn't work then wipe.
mt3g said:
I would try flashing like this.
Boot into recovery
wipe system
flash A2DP working Cm-10.1 rom
Flash gapps
reboot and test, if it doesn't work then wipe.
Click to expand...
Click to collapse
I've installed dozens of roms over the last few years, including some AT&T ones, but this one specifically gives me an error when installing the rom. I always wipe everything when going to a new rom. I even downloaded it a 2nd time incase the first one was corrupted or something.
This isn't too important to me anymore, cause I found a 4.1.2 rom I like, that has BT and Hotspot with encryption working, which neither seem to work with any 4.2 roms. But I am curious why it wasn't working.
so madmack's patch has made it into the latest nightly correct? no need for the rom he posted, just use the latest cm10.1 nightly?
dodgefan67 said:
so madmack's patch has made it into the latest nightly correct? no need for the rom he posted, just use the latest cm10.1 nightly?
Click to expand...
Click to collapse
I looked at things merged and an a2dp commit was but seen that more then a few times added with nothing changed so I'm going with a no on that one dude.
T-Mobile SGS III
which GAPPs to use with this 10.1 fix
thanks for the link to a bluetooth solution. Which GAPPs do I use for this ROM? I am new to rooting.
I loaded a later version dated april 11 - 2013 but bluetooth and voice search is not working. Any pointers would be appreciated.
Running on Skyrocket.
very much appreciated
--------------
mt3g said:
Please give thanks to madmack!!
I did nothing to help with this, just bringing it to the people of this forums that want it.
It has working A2DP by pulling some stuff from the 12-26-12 build and implementing them into 1-15-13 and might have some broken features. If anyone finds any broken features then let me know and I'll ad them to this post.
VoIP calling is borked (video chats)
Call Echo is possible to return
His post with the download link, give him a thanks
http://forum.xda-developers.com/showpost.php?p=36804356&postcount=10721
Here are some posts confirming
http://forum.xda-developers.com/showpost.php?p=36842057&postcount=10754
http://forum.xda-developers.com/showpost.php?p=36831201&postcount=10740
Click to expand...
Click to collapse
1dufflebag said:
thanks for the link to a bluetooth solution. Which GAPPs do I use for this ROM? I am new to rooting.
I loaded a later version dated april 11 - 2013 but bluetooth and voice search is not working. Any pointers would be appreciated.
Running on Skyrocket.
very much appreciated
--------------
Click to expand...
Click to collapse
ahhh nothing says XDA like a thread being raised from the dead
ok, first off, this is for the S3, not the S2 Skyrocket as your sig says you are using
second, go to the CM download page for your device (http://get.cm/?device=skyrocket) and grab the most recent nightly or get the stable version of 10.1 for it here (http://get.cm/?device=skyrocket&type=stable) dated June 24th. those should work fine
third, go to http://goo.im/gapps and grab the first file there, dated 20130301 for 4.2.2
make sure your recovery is updated (CWM or TWRP) then flash CM first, then gapps
then go here (http://forum.xda-developers.com/forumdisplay.php?f=1399) for the AT&T Skyrocket forums
good luck!
Midnight_Rider said:
ahhh nothing says XDA like a thread being raised from the dead
ok, first off, this is for the S3, not the S2 Skyrocket as your sig says you are using
second, go to the CM download page for your device (http://get.cm/?device=skyrocket) and grab the most recent nightly or get the stable version of 10.1 for it here (http://get.cm/?device=skyrocket&type=stable) dated June 24th. those should work fine
third, go to http://goo.im/gapps and grab the first file there, dated 20130301 for 4.2.2
make sure your recovery is updated (CWM or TWRP) then flash CM first, then gapps
then go here (http://forum.xda-developers.com/forumdisplay.php?f=1399) for the AT&T Skyrocket forums
good luck!
Click to expand...
Click to collapse
---------
Thanks for the information and redirection
Well after much internal thought I decided to release a CarbonDev rom with Houcha kernel I built from source.
I used Haze028's guide along with great help from chadouming for device/vendor/houcha kernel work.
I have tried upgrading the kernel using the releases in the houcha kernel thread, that works to keep up to date on kernel changes.
Its built and tweaked for Canadian E971-E973 so thats all I can confirm working.
Its very stock except I chose to use Novalauncher as this is my own launcher of choice.
I baked in AwesomeBeats (credits to pimp my rom) for some quality sound as using dspmanager wasn't working for me at all.
As far as I know, everything is working, I tested all main functions as best I can but I'm sure someone will find something that's not working.
If you do, let me know about it here and I'll try to fix it.
Thanks to everyone I mentioned and anyone I forgot who helped along the way!
P.S If you're running CM10.1 or Houstonns AOKP/CM/PA, you can install this without KDZ'ing, just wipe data/factory reset/dalvik and install.
Otherwise you will likely have to KDZ to the first Freegee able kdz.
If someone wants to test please do and let me know!
Some highlights I didn't mention:
Automatic Zip aligning
Using houcha built in opensourced mpdecision and thermald (binaries for these two are fully removed from filesystem).
<update> ONLY ICS modem working, modem files I had were both ICS. </update>
I setup a "tweaks" (look for "kerneltweaks" file in /system/etc/init.d) file for colour settings and for setting your own governor and io scheduler at boot (I don't like using the Performance Control gui for setting at boot, I use it just to monitor settings).
Colour settings are active but the governor and io are remmed out. The governor io scheduler settings that are remmed out are what I use.
Download V1 here:
http://d-h.st/d4L
Download V2 here, fixed Hangout video call crash:
http://d-h.st/m4O
For manual fix, put this file in /system/lib/soundfx (replacing existing file) to fix Hangout video call crash. V2 fixed rom uploaded.
http://d-h.st/Yxy
Modem links removed because I found out they are were both the same ICS modem just renamed. Sorry for the confusion.
Nice, great work!
Is there anything special to do when flashing? Is it necessary to kdz back to a particular version before? Right now I'm on OTA Telus JB (rooted and freegee'd of course !)
Sent from my LG-E973 using xda app-developers app
glc011 said:
Nice, great work!
Is there anything special to do when flashing? Is it necessary to kdz back to a particular version before? Right now I'm on OTA Telus JB (rooted and freegee'd of course !)
Sent from my LG-E973 using xda app-developers app
Click to expand...
Click to collapse
Good question and the answer is yes you shouldn't be on OTA jb as far as I know.
Should have the same requisites as CM10.1/AOKP which was (for Rogers) the D version KDZ.
So if you're running CM10.1 or Houstonns AOKP, you can install this straight up.
Downloading now will test all day tomorrow at work!
Sent from my LG-E973 using xda app-developers app
hey bro.. good stuff.. btw. those of you guys that need to do the kdz.. I'm gonna make flashable zips for each Canadian variant so that u won't have to do that whole process.. there's still a few files I need..
houstonn said:
hey bro.. good stuff.. btw. those of you guys that need to do the kdz.. I'm gonna make flashable zips for each Canadian variant so that u won't have to do that whole process.. there's still a few files I need..
Click to expand...
Click to collapse
wow, that would be great...
thanks houstonn
Thanks Houstonn! That would be real helpful.
Is there any easy way we can get our phones in a position so we don't have to kdz back?
Or is it not worth the effort??
houstonn said:
hey bro.. good stuff.. btw. those of you guys that need to do the kdz.. I'm gonna make flashable zips for each Canadian variant so that u won't have to do that whole process.. there's still a few files I need..
Click to expand...
Click to collapse
Thanks man, I hope its as stable for you as it has been for me.
Keep me posted!
Natas82 said:
Downloading now will test all day tomorrow at work!
Sen
t from my LG-E973 using xda app-developers app
Click to expand...
Click to collapse
So anyone have any feedback for me!?
I am running it on an AT&T e970, and everything is working perfectly. Looking forward to a resync and update. There are some minor settings commits on carbons github that have been updated since you released. I have not run into any issues. Everything is working perfectly fine. Thanks for the great rom.
Thank you very much! I appreciate it greatly.
I was waiting for some feedback before going forward because I wanted to gauge how good/bad I'd done so far!
I'll resync/update in short order, going through some health stuff this week.
Cheers!!
Paulicat said:
Thank you very much! I appreciate it greatly.
I was waiting for some feedback before going forward because I wanted to gauge how good/bad I'd done so far!
I'll resync/update in short order, going through some health stuff this week.
Cheers!!
Click to expand...
Click to collapse
No rush man. Everything's working fine. There haven't been any major updates. I can wait and I'm sure others can too.
I'll update the first post when I have a new build.
Just like to hear from anyone else running this to see if there are any other problems that people have found!
Going to flash it tonight and let you know if I have any problems looks like good build though thanks
Sent from my Optimus G using xda app-developers app
jaynkc said:
Going to flash it tonight and let you know if I have any problems looks like good build though thanks
Sent from my Optimus G using xda app-developers app
Click to expand...
Click to collapse
Thank you, let me know if you find anything.
Paulicat said:
Thank you, let me know if you find anything.
Click to expand...
Click to collapse
damn, I really want to flash this...but I'm too lazy to
KDZ...:crying:
very tough decision to make !
glc011 said:
damn, I really want to flash this...but I'm too lazy to
KDZ...:crying:
very tough decision to make !
Click to expand...
Click to collapse
Do it! I can almost guarantee you'll love this rom!
And then after you flash it, try it out for a couple days and report back!
If I'm running Houston pa build do I need to kdz back or can I just wipe and flash this ROM?
Sent from my Optimus G using xda app-developers app
jaynkc said:
If I'm running Houston pa build do I need to kdz back or can I just wipe and flash this ROM?
Sent from my Optimus G using xda app-developers app
Click to expand...
Click to collapse
Just clean wipe factory reset. You should be good to go
I'll have a zip soon so no kdzing probably tmrw.
Sent from my Samsung Captivate using Tapatalk 2
Hey Houston running pa build and loving it!!!! Have had not problems crept for the hw overlay thing which real isnt a problem just thought I'd try this carbon and see how it is too thanks for the info about flashing it I was going to go through the whole kdz thing again
Sent from my Optimus G using xda app-developers app
Hi guys!
CyanogenMod have released cm10.2 for several days on github.
I have tried to build cm10.2 for SU640/P930 with the help of dczz Feishui,Men and so on.
Now,Phone can get into system,but I came across a serious problem:easily hot reboot.
In the days,I don't have time to fix the problems.
so post it out now!
Anyone can change and fix this rom as long as you are interested .
I will open sourse on github.com as soon as I can.
===================================================================
Aug.28:
Today,I will post the cm10.2's sourse of LG su640.
Anyone can download and use as long as you are interested .
My github:https://github.com/joyoki
Noticefication:
1)my sourse come from Rmcc's CM10.1,so Thx again.
2)I have checked Rmcc's cm10.2 sourse of P930,he focus on kernel and display and fix many bugs and errors.
3) I'm freshman,so just can fix display and apps,kernel don't change. you can directly use cm10.1' kernel sourse to build.
4)About P93X,Rmcc have post offical cm10.2 on Aug. 27.I have check his sourse,It's better than mine,so there is no need to post P93X's version.sorry...
Hope can help you!
============================================================
Aug.26:
chalog:
Fix rebooting
Fix Sdcard (Thx for Rmcc)
bugs:
Reported by you
Rom Download:
Su640:
Release3-cm-10.2-20130826-UNOFFICIAL-su640
p93x:
Release3-cm-10.2-20130826-UNOFFICIAL-p930
Rom is Uploading...
==========================================
Aug.25:
Rebooting is Fixed,but not perfect. you should switch on "Disable HW overlays" in Settings-Develoer options.th
This is theView attachment cm10.2-8.20log.txt caught by Feishui about hot rebooting
sdcard is the problem of Fstab. It will be fixed in the later version.
Today, I provide two way to flash the rom:The Backup To Restore and The Flashable ZIP
If you are interested,you can have a try.
At last,Looking forward to Rmcc's offical CM10.2.
Rom Download:
The Backup To Restore
The Flashable ZIP
Notification:
1.The Rom is released for developers and experienced users.You may come across serviral rebooting.
2.If your phone get into system,but easily rebooting, you must go Settings-Developer options to switch on "Disable HW overlays"
3.The Backup To Restore is same with The Flashable ZIP,you don't need to download all.
4.Above all,This is a Dev ,There are many bugs,so I am not responsible for bricked devices, dead SD cards, or any other issues that may arise from flashing this ROM !
5.About P93X,LU6200 and VS920 ,it is Dev version and is easy to port based on this rom, so don't provide for the moment.
P93X port guide: you just delete "etc" and "boot" of this rom instead of P93X'CM10.1,It will work well.Good luck to you
=========================================
Aug.23:
I have find a method to Fix Rebooting.
I will test again to make sure the method is working. The Fixed Rom will be post as soon as possible.
Please Just Wait a Moment.
New ScreenShot:
http://note.youdao.com/share/?id=387922c50460a2716c8a406dc6809b95&type=note
Rom Download: Please Wait For Fix Rom...
Very cool. Thanks for sharing
Sent from my LG-P930 using Tapatalk 4
Waiting for P930. Anyway thanks for developing.
Delete post
Any responses from susers?
slg1119 said:
Thanks...
I want fix this rom
but....
I'm only have SHW-E210S
Navik, You will check this github
https://github.com/OPENSEMC
https://github.com/Team-Hydra
Click to expand...
Click to collapse
Very thanks.I have check some days ago,but not work.
Now I kil the HW,Hot Rebooting is fixed.
Anyway thx again.
Built my own for the p930 today - worked well but did not get a data signal. Checked and the apn list was empty. Did you have this issue ? A cursor test of other features seemed to work gps/bluetooth etc...
Nz
notzippy said:
Built my own for the p930 today - worked well but did not get a data signal. Checked and the apn list was empty. Did you have this issue ? A cursor test of other features seemed to work gps/bluetooth etc...
Nz
Click to expand...
Click to collapse
No, Data work well.you can use hiapn(an apn manage app in google play) to set apn.It's very easy.
I have built P93X's CM10.2 yesterday,but my network has some problem,uploading is very slowly.
if you cant slove ,you can try to port mine to p93x.
Good luck to you!
@navik @rmcc have you ever seen an error like this, http://pastebin.com/N0qr2nCP?
I'm currently trying to port to a 4.3 ROM and keep rebooting back into recovery.
Thanks.
nexwave-mat said:
@navik @rmcc have you ever seen an error like this, http://pastebin.com/N0qr2nCP?
I'm currently trying to port to a 4.3 ROM and keep rebooting back into recovery.
Thanks.
Click to expand...
Click to collapse
I can't open your URL .
Keeping rebooting back into recovery may show that you didn't mount your system,just mount boot.
Hope can help you!
What kernel is in this rom?
ancifil said:
What kernel is in this rom?
Click to expand...
Click to collapse
Kernel is 3.0.87,wind kernel.
I have test kernel 3.4 on Jelly Bean 4.22/4.3,It can get into system，but on display...There are too many bugs and problems to deal.
navik said:
I can't open your URL .
Keeping rebooting back into recovery may show that you didn't mount your system,just mount boot.
Hope can help you!
Click to expand...
Click to collapse
Try this, http://pastebin.com/N0qr2nCP
I have test kernel 3.4 on Jelly Bean 4.22/4.3,It can get into system，but on display...There are too many bugs and problems to deal.
Click to expand...
Click to collapse
I'm sure it is. But seems we will have good graphic performance in JB roms only on 3.4 kernels(i'm sorry but now with 3.0 it works with microlags and microdelays)... I hope it will come.
ancifil said:
I'm sure it is. But seems we will have good graphic performance in JB roms only on 3.4 roms(i'm sorry but now with 3.0 it works with microlags and microdelays)... I hope it will come.
Click to expand...
Click to collapse
Stupid LG, why they didn't release 4.1 930? It's unfair for nitro users
6783 said:
Stupid LG, why they didn't release 4.1 930? It's unfair for nitro users
Click to expand...
Click to collapse
Especially considering they released it for its virtual twin the su640.
Sent from my LG-P930 using xda app-developers app
nexwave-mat said:
Try this, http://pastebin.com/N0qr2nCP
Click to expand...
Click to collapse
Your log didn't show any errors，I wonder the problem is cased by your flash updater，but，I just guess.... not very sure...
Sent from my LG-SU640 using xda premium
6783 said:
Stupid LG, why they didn't release 4.1 930? It's unfair for nitro users
Click to expand...
Click to collapse
It's not just LG's problem，It also depend on AT&T.
Sent from my LG-SU640 using xda premium
navik said:
Your log didn't show any errors，I wonder the problem is cased by your flash updater，but，I just guess.... not very sure...
Sent from my LG-SU640 using xda premium
Click to expand...
Click to collapse
I'm pretty sure this line is the problem. Just can find the source of the problem.
Code:
[ 27.999572] init: critical process 'servicemanager' exited 4 times in 4 minutes; rebooting into recovery mode
Is it just my imagination, but are the only download links for the su640?
Sent from my LG-P930 using xda app-developers app