Phone CPU stuck at 1.2 GHZ - G3 Q&A, Help & Troubleshooting

So I tried a graphics boost for the G3 and for some reason now when i run setcpu. My phone is stuck at only 1.2 ghz. Does anyone know how i can get it back to 2.5 without have to redo my ROM

Uninstall, charge, then dirty flash your rom

Tried that. Flash a second rom and its still stuck only at 1.2 GHz.

So ive wiped everything on the phone expect the sd card. Flashed a stock rom and still having the issue

Related

[Q] Changing SIM Issue with SetCPU

I have a HTC Desire with SLCD screen, HBOOT 0.93, Starburst Lite 1.2.0 ROM and flashed Data2Whatever v0.4d with a 1280Mb Ext3 partition.
(I konw I should have used the Data2SD Installer given in Starburst but I forgot.)
After the installation everything was fine, including installing and launching apps, and rebooting.
But on one boot I installed SetCPU and overclocked the CPU to 1190 MHz on smartass scaling. Rebooting was OK, but once I changed another SIM, and when I boot into the system I can't light up the screen, although when I pressed the sleep/wake button the keys did light up.
Then I reflashed the ROm and Data2Whatever and tried changing SIM and reboot without installing SetCPU, and there was no such issue. However, once I installed SetCPU, the same problem occured again. I've tried 3 times or 4 and got the same issue with SetCPU every time.
Does anyone have the same problem as I do? If there really is a problem, what should I do if I want to overclock?
Many thanks!
Sadly there is nothing you can do much. Overclocking a CPU, especially in a phone does not always work. What something works for some people won't necessarily work for you. You could try dropping it to 1113MHz since that is stable, but anything above that and it starts to get a little shakey.
would agree with the previous post, 1190 MHz is not stable for everybody, try overclocking to 1113 MHz (even though i'm not sure y do u need to overclock)

[Q] my phone freezes each time

i am new to this forum and rooted my phone and s-off everything is okey(i think)
but when i install a custom rom like leedroid 2.2 1.8ghz or coredroid 1.8 ghz
after a few restarts and a bunch of installed apps my phone freezes and doesn't do ANYTHING and makes me angry so i must reainstall everything and this happened 5 times ...-_-''
so please can someone help me out...:O
im getting desperate
(sorry for my bad english)
Did u wipe before installin rom use leedroid 2.2.2
Sent from my Desire HD using XDA App
It may be a problem related to CPU Overclock..some CPUs don't support it.
What's your CPU frequency?
Are you using SetCPU or No Frills or other?

[Q] Overclock failing after some changes

Hey!
My Defy stopped working with any Overclock app. With 2.1, it started failing yesterday, I don't remember why, I guess I installed something (i think defy2ndinit) and since then every time i try to OC with Setvsel ou Milestone Overclock the phone reboots.
I looked into the 2ndinit boot and found some OC settings, I tried to OC through those options but it loops at the M logo.
Today i upgraded to 2.2, did a factory reset, reinstalled everything, rooted, etc etc, and still, it's not working. It Keeps rebooting everytime I apply any new OC setting.
Guess I need some help.
Thanks!
EDIT: I was able to OC it with a 58vsel @1000Mhz, lower than this setting, it reboots (Only via Setvsel, using "APPLY + QUIT").
Any clues, please?

v6 supercharger

I have some issues that I never had before this newest update to V6 Supercharger.... So let me go into some detail here:
I'm running MikG V3.11 on my Evo 4g HW 004. I was using Underworld V.05 SBC Kernel until I ran the new V6 and chose the super UL version of 512 hp. It ran fine, until I rebooted and then the phone would freeze once booted and I'd have to pull the battery every time. So to counter this I flashed my old version of Anthrax and it worked fine so I did some research and found that you can't use any kernel tweaks with Underworld so I tried to turn them off and reflashed Underworld.... ran into phone locks again.
Decided to go with the Super option, I think #5 of 512HP and noticed that I had to manually run each tweak once before they took effect and did their thing during boot. So everything went fine until I tried to Zipallign everything and when it got to around 98%, everything started force closing like Phone, HTC, launcher.... everything that makes the phone work. They would just keep popping up and it rendered the phone unusable. So I rebooted and let it sit for 10 minutes thinking it had to rebuild a list, and it's stuck at HTC screen...
Bottom line, I'm very confused with this new version of V6 and am curious what settings I CAN and CANNOT use on my Evo 4g. I would like to try and use the Super UL setting because it was much faster than the other settings I tried in the OG V6 Supercharger. As well as my Underworld SBC kernel and MikG rom.
If any more information is required, please let me know and I will provide all I can and try to grab screenshots if necessary.
Naturesretard said:
I have some issues that I never had before this newest update to V6 Supercharger.... So let me go into some detail here:
I'm running MikG V3.11 on my Evo 4g HW 004. I was using Underworld V.05 SBC Kernel until I ran the new V6 and chose the super UL version of 512 hp. It ran fine, until I rebooted and then the phone would freeze once booted and I'd have to pull the battery every time. So to counter this I flashed my old version of Anthrax and it worked fine so I did some research and found that you can't use any kernel tweaks with Underworld so I tried to turn them off and reflashed Underworld.... ran into phone locks again.
Decided to go with the Super option, I think #5 of 512HP and noticed that I had to manually run each tweak once before they took effect and did their thing during boot. So everything went fine until I tried to Zipallign everything and when it got to around 98%, everything started force closing like Phone, HTC, launcher.... everything that makes the phone work. They would just keep popping up and it rendered the phone unusable. So I rebooted and let it sit for 10 minutes thinking it had to rebuild a list, and it's stuck at HTC screen...
Bottom line, I'm very confused with this new version of V6 and am curious what settings I CAN and CANNOT use on my Evo 4g. I would like to try and use the Super UL setting because it was much faster than the other settings I tried in the OG V6 Supercharger. As well as my Underworld SBC kernel and MikG rom.
If any more information is required, please let me know and I will provide all I can and try to grab screenshots if necessary.
Click to expand...
Click to collapse
1. Boot into recovery, and fix permissions
2. I would maybe try talking to ca1ne personally about this and/or posting this into the V6 supercharger thread.
3. Flash an old(er) version. Sometimes newer isn't better.

[Q] Correct ROM to flash for cleaning.

Hey, recently I've been switching between CWM and TWRP with 4.3 and 4.4 ROMs and now that I want to go back to my stable 4.3 daily driver, I'm having weirs issues such as low bench scores, WiFi and Facebook issues, also my processor speed always clocks back to 1100 even if I set it to 1500. Tried full wiping and doing a clean flash but to no avail. So I plan on starting from scratch by flashing a stock ROM from the PC. I was wonderimg which ROM should I use since I am in Nicaragua, with Movistar. Any help is really appreciated.
In case you are wondering I am currently using CWM recovery 6.0.4.5 and liquid smooth stable official with no tweaks whatsoever.
Edit: some issued turned out to be the very first virus I've ever encountered on my years with Android devices haha.

Categories

Resources