[Q] Overclock failing after some changes - Defy General

Hey!
My Defy stopped working with any Overclock app. With 2.1, it started failing yesterday, I don't remember why, I guess I installed something (i think defy2ndinit) and since then every time i try to OC with Setvsel ou Milestone Overclock the phone reboots.
I looked into the 2ndinit boot and found some OC settings, I tried to OC through those options but it loops at the M logo.
Today i upgraded to 2.2, did a factory reset, reinstalled everything, rooted, etc etc, and still, it's not working. It Keeps rebooting everytime I apply any new OC setting.
Guess I need some help.
Thanks!
EDIT: I was able to OC it with a 58vsel @1000Mhz, lower than this setting, it reboots (Only via Setvsel, using "APPLY + QUIT").
Any clues, please?

Related

[Q] Process system is not responding - Force close or Wait

Hi there
I think I destroyed my CPU or something ... I used a custom kernel which does OC and UV and it worked without any glitches for about 8 hours.
Then it froze and now I cannot boot any rom.
If there is user data it boots to a frozen lockscreen.
If I do a factory reset it says that the Process system is not responding...
Anybody got an idea?
I just flashed the official SLCD RUU and now it works again ...
I can only run official ROMs
If I root and flash a new one, the same error persists!
anybody any idea?
I cannot really tell HTC to replace my phone, it works with their froyo version :S
but I don't like Sense and now I'm stuck using it ... hate that -.-
Well you rooted with an RC of unrevoked. Could as well have something to do with that. Have you tried custom sense roms? Just to see if they work. Else, i would try the downgrade-to-hboot-0.83-method.. just practice the screenless method with the screen turned on, i managed to do iy in one attempt (H)

[Q] Changing SIM Issue with SetCPU

I have a HTC Desire with SLCD screen, HBOOT 0.93, Starburst Lite 1.2.0 ROM and flashed Data2Whatever v0.4d with a 1280Mb Ext3 partition.
(I konw I should have used the Data2SD Installer given in Starburst but I forgot.)
After the installation everything was fine, including installing and launching apps, and rebooting.
But on one boot I installed SetCPU and overclocked the CPU to 1190 MHz on smartass scaling. Rebooting was OK, but once I changed another SIM, and when I boot into the system I can't light up the screen, although when I pressed the sleep/wake button the keys did light up.
Then I reflashed the ROm and Data2Whatever and tried changing SIM and reboot without installing SetCPU, and there was no such issue. However, once I installed SetCPU, the same problem occured again. I've tried 3 times or 4 and got the same issue with SetCPU every time.
Does anyone have the same problem as I do? If there really is a problem, what should I do if I want to overclock?
Many thanks!
Sadly there is nothing you can do much. Overclocking a CPU, especially in a phone does not always work. What something works for some people won't necessarily work for you. You could try dropping it to 1113MHz since that is stable, but anything above that and it starts to get a little shakey.
would agree with the previous post, 1190 MHz is not stable for everybody, try overclocking to 1113 MHz (even though i'm not sure y do u need to overclock)

[Q] CM7 OC crash fix?

I foolishly set my kernel to OC to the max in CM7, with "Set at boot" checked (stupid, stupid, stupid...), and now LPP keeps crashing on boot, so I am unable to get to Performance Settings to reset the clock speed. I was running the Tiamat kernel at the time, but have since flashed stock over it to no avail.
Short of a full wipe, what can I do to get my CPU back to a more sane speed? I haven't done a full TiBackup in a few days, so I'd like to avoid the nuclear option if I can.
Try booting it in safe mode.
Hold the menu button while you turn the device on. (I think that's how you do it.)
It should let you fix SetCPU.
godsmacked4653 said:
Try booting it in safe mode.
Hold the menu button while you turn the device on. (I think that's how you do it.)
It should let you fix SetCPU.
Click to expand...
Click to collapse
I wasn't using SetCPU; I was using the Performance Settings within CM7. And as it turns out, my problems weren't related to overclocking: I was running at 998MHz once I flashed back to the stock kernel.
Regardless, I ended up being able to get into TiBackup to get an up-to-date backup set, then wiped and reinstalled. Much better now.

[Q] SetCPU Problem

My phone is R800i, -64 baseband, running the KA11 v2 ROM with DooMKernel.
I have SetCPU which works a treat. Overclocks / underclocks fine.
My problem is, every time I reboot the phone, it reverts back to the ondemand governor. I change it to Performance governor every time, but this becomes annoying.
I have no idea why. I read on another thread that the newer superuser app doesn't give root access to SetCPU early enough when booting? I have "set on boot" ticked.
Any suggestions?
My version of SetCPU is 2.3.0
Superuser v3.0.7 (41)
Su binary v3.0.3.2
Try no frills. I know that I had problems when rebooting the phone. It wouldn't set properly. Something about an improper shutdown.
Powering off and back on rather than rebooting would apply the changes properly for me.
I say try no frills because it will tell you if the settings have been applied. Not sure if SetCPU will tell you or not.
Never found a fix for it though.

Phone CPU stuck at 1.2 GHZ

So I tried a graphics boost for the G3 and for some reason now when i run setcpu. My phone is stuck at only 1.2 ghz. Does anyone know how i can get it back to 2.5 without have to redo my ROM
Uninstall, charge, then dirty flash your rom
Tried that. Flash a second rom and its still stuck only at 1.2 GHz.
So ive wiped everything on the phone expect the sd card. Flashed a stock rom and still having the issue

Categories

Resources