Related
Hi, im on the DK28 version of froyo, i cant update to ec05 because the phone will no longer mount to any pc, i have tried multiple pc's and multiple cords and cannot get the phone to mount.
When i try to flash the an update.zip other than the dk28 version i get errors. The phone used to have root but when i reflashed DK28 thinking it would fix the sd card issue, i lost root. I cant 0ne click it, i cant odin a rom. It left the Superuser application behind (Which I cant uninstall). Also I tried a wipe data/factory. When i try updating to EC05 i was getting an error 2. Basically im completely stuck on DK28.
At the very least i need to get the superuser application off the phone so i can return it since i believe the mounting issue is a hardware failure.
Does anyone have an update.zip that will not give me a signature error? Or have something i can try to get this fixed enough to return it to sprint.
I am on my phone so can't search for you right now but you are looking for that Samsung.exe file whichb was an Odin-like executable with EB13 stock files. I can look tonight if someone doesn't give you a link before then.
Do you BONSAI?
kennyglass123 said:
I am on my phone so can't search for you right now but you are looking for that Samsung.exe file whichb was an Odin-like executable with EB13 stock files. I can look tonight if someone doesn't give you a link before then.
Do you BONSAI?
Click to expand...
Click to collapse
That sounds like i would have to run the file from a pc, which at the moment, no pc is seeing this phone in either download mode nor via odin, one click or just plain ole mounting.
IzzyRios said:
That sounds like i would have to run the file from a pc, which at the moment, no pc is seeing this phone in either download mode nor via odin, one click or just plain ole mounting.
Click to expand...
Click to collapse
Bro try different t ports on the computer try restarting the phone and computer also if none of that works try different USB cords different computer as well if non of that works u need to get a new USB cable...
Sent from my Epic 4.1g bonsai plant
davidrules7778 said:
Bro try different t ports on the computer try restarting the phone and computer also if none of that works try different USB cords different computer as well if non of that works u need to get a new USB cable...
Sent from my Epic 4.1g bonsai plant
Click to expand...
Click to collapse
Unfortunatly ive tried 3 different cables as well as different computers and different usb ports on each one of them. What i need is a Non-pc involved solution for this. I can live without mounting the phone to the pc, if i could just get upgraded to Sprints official EC05 rom. I know it has its problems, but at least it wont lock me out of ota like DK28 has, and then i can at least take the phone bak to the store at my liesure.
Have you tried removing and reinserting the SD card? When you 3 finger the phone you only get stock recovery? Does the charge light come on with the data cable in the USB port?
kennyglass123 said:
Have you tried removing and reinserting the SD card? When you 3 finger the phone you only get stock recovery? Does the charge light come on with the data cable in the USB port?
Click to expand...
Click to collapse
The charging portion works fine, also i have 2 diff micro sd's tried with either one in and with neither in. didnt work. 3 finger only gives me stock and not Cwm anymore since i reflashed DK28
IzzyRios said:
The charging portion works fine, also i have 2 diff micro sd's tried with either one in and with neither in. didnt work. 3 finger only gives me stock and not Cwm anymore since i reflashed DK28
Click to expand...
Click to collapse
Have you tried toggling the USB debugging mode? Also try download mode (power on holding "1" key) then see if Odin recognizes your phone.
kennyglass123 said:
Have you tried toggling the USB debugging mode? Also try download mode (power on holding "1" key) then see if Odin recognizes your phone.
Click to expand...
Click to collapse
yes to both. odin does not see the phone. Im certain that its a hardware problem at this point, which is why im looking for an update zip i can manually put on the card that will let me flash ec05 on to the phone and erase super user. at the very least i want to remove super user.
IzzyRios said:
yes to both. odin does not see the phone. Im certain that its a hardware problem at this point, which is why im looking for an update zip i can manually put on the card that will let me flash ec05 on to the phone and erase super user. at the very least i want to remove super user.
Click to expand...
Click to collapse
I thought the sd cards won't mount? If they do then it will have to be a signed update zip that doesn't check for the stock apps and previous modem version.
kennyglass123 said:
I thought the sd cards won't mount? If they do then it will have to be a signed update zip that doesn't check for the stock apps and previous modem version.
Click to expand...
Click to collapse
Im Sorry i should have clarified this. The phone can see the SD cards just fine..Internally. But when i connect a cable (any cable, i have 4) to the pc (any pc, i tried on 3 dif pc's one xp, two windows 7), i cannot see the cards from the PC, odin does not see the phone, etc, basically interfacing between the 2 is nil. I am currently taking the micro sd card out of the phone, putting it into a usb adaptor and copying files to it from the pc that way, then returning the card to the phone in order to try to update it. My problem is, i need a Rom that will update without trying to verify the signature since it thinks my phone is rooted, even though it isnt anymore. At this point i wouldnt even mind a wipe since i did that yesterday anyway, just going back to DK28 Stock. Problem with Dk28 is it doesnt allow the OTA of Ec05 to come in.
Ok got it for you. Try this for update.zip to get you to DI18:
http://forum.xda-developers.com/showthread.php?t=786266
Do you BONSAI?
kennyglass123 said:
Ok got it for you. Try this for update.zip to get you to DI18:
http://forum.xda-developers.com/showthread.php?t=786266
Do you BONSAI?
Click to expand...
Click to collapse
Yeah this didnt work. the first link is broken, but once i found the rom much further in the thread i got it. Trying to install it produces this error...E:Signature Verification Failed. Installation abouted.
IzzyRios said:
Yeah this didnt work. the first link is broken, but once i found the rom much further in the thread i got it. Trying to install it produces this error...E:Signature Verification Failed. Installation abouted.
Click to expand...
Click to collapse
Look further in the thread to see if someone put up a signed version. Amend2edify will create a signed zip, it may convert the one you downloaded. I found that thread by googling "update.zip for dk28 samsung epic" there were a lot more results I didn't check out.
Do you BONSAI?
kennyglass123 said:
Look further in the thread to see if someone put up a signed version. Amend2edify will create a signed zip, it may convert the one you downloaded. I found that thread by googling "update.zip for dk28 samsung epic" there were a lot more results I didn't check out.
Do you BONSAI?
Click to expand...
Click to collapse
The rom i downloaded had signed in the name and its what gave me the signature error.
stock.di18.deodexed.updatev3.signed.zip
IzzyRios said:
The rom i downloaded had signed in the name and its what gave me the signature error.
stock.di18.deodexed.updatev3.signed.zip
Click to expand...
Click to collapse
D'OH! There is a thead with flashable stock ec05 roms. Maybe you can ask the dev to make it work as a signed flash from stock recovery.
Do you BONSAI?
Dial ##8778## and make sure that PDA is checked under the USB setting
stir fry a lot said:
Dial ##8778## and make sure that PDA is checked under the USB setting
Click to expand...
Click to collapse
What does that do?
Well for one it can cause your USB not to mount..
There is a guy named drockstar in the development section that has stock roms posted they might be able to help you
Sent from my SPH-D700 using XDA Premium App
Samsung galaxy SIII hard bricked will not boot no power, but ODIN 1.85 can recognize it, (not the new Odins), when I try to re-flash it with Odin I get stuck at setupConnection..
any help? can I use the small USB mod
If you don't mind me asking, how you brick your phone?
Sent from my SGH-T999 using xda app-developers app
i have the same problem i used the Odin3 v1.85 and installed CF-Root-SGS3-v6.4 zip but it failed. so then i tried to reboot it and said firmware update encountered an issue and something else. then i looked up how to unbrick and the post said to downloaded the zip CF-Insecure-SGS3_XX_NEE_ALE8-v1.2 and used Odin to install now i got nothing but a black screen buy it will go into download mode and Odin read it
You're not hard bricked if Odin can read your phone. Reboot your computer then reconnect and flash a stock rom to be safe.
chubby1_8888 said:
i have the same problem i used the Odin3 v1.85 and installed CF-Root-SGS3-v6.4 zip but it failed. so then i tried to reboot it and said firmware update encountered an issue and something else. then i looked up how to unbrick and the post said to downloaded the zip CF-Insecure-SGS3_XX_NEE_ALE8-v1.2 and used Odin to install now i got nothing but a black screen buy it will go into download mode and Odin read it
Click to expand...
Click to collapse
If I'm not wrong ODIN uses TAR files and not ZIP files. Try unziping and see if there is a TAR file if there is then thats what you have to use in ODIN.
Same as OP's phone
Sprint s3 flash pacman JB and google apps the went to reboot recovery ask to reflash su yes phone powered off and no coming back on Odin does detect it on com05 when I plug it in but anything I try to do just says waiting on connection, will not go into recovery or download modes. is there anything I can do to fix it? kies or anything? and I edited the updater scripts to be able to flash pacman because every rom I tried would fail with error 7............ please help
Kevinreid1 said:
Sprint s3 flash pacman JB and google apps the went to reboot recovery ask to reflash su yes phone powered off and no coming back on Odin does detect it on com05 when I plug it in but anything I try to do just says waiting on connection, will not go into recovery or download modes. is there anything I can do to fix it? kies or anything? and I edited the updater scripts to be able to flash pacman because every rom I tried would fail with error 7............ please help
Click to expand...
Click to collapse
Do you get a message when you plug it into your computer? Does the red LED turn on? Editing the scripts is dangerous if you don't know what you are doing!
serio22 said:
Do you get a message when you plug it into your computer? Does the red LED turn on? Editing the scripts is dangerous if you don't know what you are doing!
Click to expand...
Click to collapse
followed the guides about it just removed from top to quotes dealing with checking versions of device.
Kevinreid1 said:
followed the guides about it just removed from top to quotes dealing with checking versions of device.
Click to expand...
Click to collapse
I'm not saying that was the problem or that you did it wrong, but maybe the ROM was forced to flash and was truly not compatible or was corrupt, bricks are highly likely to occur in this case
serio22 said:
I'm not saying that was the problem or that you did it wrong, but maybe the ROM was forced to flash and was truly not compatible or was corrupt, bricks are highly likely to occur in this case
Click to expand...
Click to collapse
The roms I have downloaded are supposed to be for Sprint s3 I was running stock JB 4.3 if that makes any difference, any help on what to do know, thinking of trying the unbrick mmc card trick .... idk what else to do... thanks : ) and something went wrong somewhere for sure... lol I also found out my exact model number if that helps. SPH-L710MBBSPR again thanks for you responses..
Ok, a few things I noticed....
1. You are using a very old version of Odin. I recommend only using 3.07 or 3.09.
2. The COM port box is yellow, which probably was trying to caution you about something.
3. You have a Sprint model S3. This is the T-Mobile S3 forum.
4. You have a Sprint S3, but were trying to flash old T999 firmware! This simply will not work, and if it were to flash, insta-brick!
What you need to do is start using the Sprint forums. Only flash items you find in those forums, and nothing else. While some of our roms might flash and boot on yours, they will never function very well. This is one of the things the asserts in an updater script are intended to protect against.
Finally, just a bit of posting advice. Please use proper punctuation. Small mistakes are ok, but posting with no punctuation at all just makes it difficult for people to read, and many will just close the thread and move to the next without bothering to help.
---------- Post added at 02:28 AM ---------- Previous post was at 02:25 AM ----------
Oops! Just realized the pic in the op wasn't yours! But still, theyre all good points you should check before flashing. Also make sure kies is uninstalled or disabled on your computer.
But most importantly, you need to be in the Sprint forums. We can help a bit here, but you need to ONLY use stuff from your devices forum. And a lot of it we simply may not be familiar with.
Good luck!
DocHoliday77 said:
Ok, a few things I noticed....
1. You are using a very old version of Odin. I recommend only using 3.07 or 3.09.
2. The COM port box is yellow, which probably was trying to caution you about something.
3. You have a Sprint model S3. This is the T-Mobile S3 forum.
4. You have a Sprint S3, but were trying to flash old T999 firmware! This simply will not work, and if it were to flash, insta-brick!
What you need to do is start using the Sprint forums. Only flash items you find in those forums, and nothing else. While some of our roms might flash and boot on yours, they will never function very well. This is one of the things the asserts in an updater script are intended to protect against.
Finally, just a bit of posting advice. Please use proper punctuation. Small mistakes are ok, but posting with no punctuation at all just makes it difficult for people to read, and many will just close the thread and move to the next without bothering to help.
---------- Post added at 02:28 AM ---------- Previous post was at 02:25 AM ----------
Oops! Just realized the pic in the op wasn't yours! But still, theyre all good points you should check before flashing. Also make sure kies is uninstalled or disabled on your computer.
But most importantly, you need to be in the Sprint forums. We can help a bit here, but you need to ONLY use stuff from your devices forum. And a lot of it we simply may not be familiar with.
Good luck!
Click to expand...
Click to collapse
Thank you.. I knew I was in the wrong forum and that is why I said my s3 was a Sprint device... My problem however was the same exact problem. I got it fixed with file from another forum, while follow info from yet another forum, the file that worked for me was HomefixSprint_S3_L710.img the debrick_sph_l710.img would not work for me. I used win32diskimager and burned .img file to class 10 32gb card, stuck it in went in to download mode and used odin to write firmware file... Anyway back up any running.. I didn't download any t-mobile roms or anything that wasn't for the Sprint S3, what I did do was try and load an older JB rom that was under V4.3, it wasn't that long ago when a person could flash any android version one wished, it looks like Samsung is getting as bad as Apple you can move up but not back. Any tips on how to safely downgrade? Anyway thanks for taking the time to respond. : ) Cause no one has in the Sprint S3 forum yet.
Kevinreid1 said:
it wasn't that long ago when a person could flash any android version one wished, it looks like Samsung is getting as bad as Apple you can move up but not back. Any tips on how to safely downgrade?
Click to expand...
Click to collapse
No, Samsung is not turning into apple, there is a reason you cannot downgrade from a Knox bootloader. And to downgrade, with this device we can just flash an older ROM and it will work, maybe its different with the Sprint variant? Try to search in their forums if you haven't already
I had a beautifully running dlk3 at&t SGH-I747. had problems with battery so I flashed odin to stock DLK3. then I took the OTA from at&t and let it complete. at the end I told cwm not to let it lose root or lock boot loaders, I answered 2 questions about preserving root and secured or some thing like that. rebooted and I have the jb4.1.2 . all good.
you know I gotta see if I am missing out on any thing by using cwm to preserve root ect.
so I start over clean DLK3 take the OTA form At&t . this time I have cwm not interfear. ok great i'm jb 4.1.2 again works good.
I used CF-Auto-Root-d2att-d2uc-samsungsghi747 and now I get fail at system. as you can tell i'm still learning and learning my lessons, but if some one could direct me to what step I should try i'd appreciate it.
edit:
after I tries keis to fix it it failed and after a battery pull and retrying odin to DLK3 stock. open oden , plug phone in com does not light up but it lists the top 0 failed threads. so I un plug and plug in and retry DLK3 and end up taking screen shots
I have lost my recovery all together I only have download mode
Start with the basics...try a different micro usb/usb cable. Then if that doesn't work, try a different usb port on the pc. Don't use a hub. Make sure the phone's micro usb port is clean of debris, as well check the ends of the cable and usb port to make sure they are clean.
The cable is usually the cause of the failure in urs and other similar instances. :thumbup:
Sent from my SAMSUNG-SGH-I747 using xda premium
4-2ndtwin said:
Start with the basics...try a different micro usb/usb cable. Then if that doesn't work, try a different usb port on the pc. Don't use a hub. Make sure the phone's micro usb port is clean of debris, as well check the ends of the cable and usb port to make sure they are clean.
The cable is usually the cause of the failure in urs and other similar instances. :thumbup:
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
thankx for your reply I broke out the original usb cable and tried different portsand stilo the same.
I here searching the forums now looking for a clue as what to do to get my stock recovery back.
Just for giggles, try using Odin v3.07. Several people say the version your using is ok, but I've always used 3.07 on the s3 with no problems.
that's the version I'm using. I found a pit file reset it and got a recovery flashed. it allows flashing from external storage, but when I try to do that it sends me to the internal storage where I cannot put a file yet.
I'm thinking about sending it to get jtag repaired but then I wouldn't have gotten to fix it my self.
as I know see I flashed cf auto root on locked boot loaders ( the method of checking for locked boot loaders I used was dumb) and I got bit.
can any one tell me of how they handled this?
thankx
Bootloaders on this device, I747/m, are not locked, afaik. And the screen shot you posted was from Odin 1.81.
---------- Post added at 09:40 AM ---------- Previous post was at 09:28 AM ----------
Try flashing lg1 stock, not rooted. It will o wipe your internal sd, but may get you fixed up. Lg1 is the only full wipe stock package we have.
oh crap i now know what happened. th file that had odin 1.81 in it. i knew better but it was in the pre packaged auto root for the at&t sgh-I747.
after you pointing out i didn't use the rite one for the auto root (even tho i uves 3.07 sgs3 odin rite after i didn't notice that i used 1.81.
thats why i posted the errors in full scren shot just ncase i did some thing stupid hopping some one would point it out.
so i can get in to download and if i work at it i can now get into a buggy but usable stock recovery.
i was using stock not rooted DLK3 from the same place as the Lg1. i tried but still only barley alive.... but i believe i can fix it. no proof yet tho.
i already bought a brand new sgh-I747 off of swappa and it will be here about the 9th. so now i have time to fix it. it'll be a project / testing phone.
now that i know that the http://forum.xda-developers.com/showthread.php?t=1963790&highlight=autoroot where i downloaded http://autoroot.chainfire.eu/ sgh-I747 file using odin 1.81 packed in with it, and followed all the instructions.
i am using odin 3.07 galaxy 3 odin.
can any one help me on what i could do with my testing phone to fix it if i can adb in?
and suggestions will be considered.
i don't post much. i'm a reader but i had to speak out as i'm running out of options.
i read this forum more than the news. i'm always a little behind the development thats going on and i follow as a student.
Hey guys, I have a Samsung Galaxy S3 for Tmobile SGH T999 and I had cyanogen on it until it crapped out and got hard bricked. AFter following these links, http://forum.xda-developers.com/showthread.php?t=1949687 and http://forum.xda-developers.com/showthread.php?t=2439367, I was able to unbrick my phone and get into boot recovery mode. However, when i try to flash the stock firmware in odin, I get an error (the error is shown in the attachment). Can anyone please help me? Sorry if im posting something wrong, I am new to this forum. Thank you!
After booting into download mode, take out the sdcard before flashing with Odin. Also if kies is on the computer, uninstall it.
DocHoliday77 said:
After booting into download mode, take out the sdcard before flashing with Odin. Also if kies is on the computer, uninstall it.
Click to expand...
Click to collapse
I tried this still doesnt work.
You said there was an error msg, but im not seeing it in the screenshot.
How exactly did you brick it though? Have you tried flashing MJC or NC2 firmware from Odin?
If you are still running MD5 or earlier, you could try flashing TWRP, then boot recovery and flash the recovery firmware package in the development section.
DocHoliday77 said:
You said there was an error msg, but im not seeing it in the screenshot.
How exactly did you brick it though? Have you tried flashing MJC or NC2 firmware from Odin?
If you are still running MD5 or earlier, you could try flashing TWRP, then boot recovery and flash the recovery firmware package in the development section.
Click to expand...
Click to collapse
Sorry i meant failure not error. I bricked it because my cyanogenmod was having problems and i tried to restore it, after i did it completely bricked. Sorry can you please elaborate what is TWRP, MJC or NC2 firmware, im dont have much knowledge about these kind of things. Thank you so much for helping me, it means alot to me and I will do my best to follow your directions.
Ok, ill explain better when I get to my computer. It'll be too much to try to type on this tiny device im using right now!
But for now, TWRP is a custom recovery, like CWM. You use it when flashing roms like CM.
MJC and NC2 are just the different firmware builds you can flash in Odin. We shorthand it by just using the last 3 letters of the build version. T999UVUENC2 is what im referring to when I say NC2.
Take a look at my firmware thread. Its stickied at the top of development. Linked in my sig too.
Let me know if this helps your understanding at all. Ill explain more in what to do shortly.
Thanks for that, it gave me a better understanding. I tried to install flash and this happens when i try to flash twrp or MJC on odin
Ahhh! PIT=Partition Information Table
Odin uses this to know the partition layout of the device so it knows where to flash each part of the firmware. It usually gets this directly from the device, but occasionally it becomes corrupted or lost.
There is a thread in the General section that has all our PIT files. Should be on the first page right now, maybe second. Download the correct one for your device. (My last post has a link to my repo with all PIT files)
Now try flashing your firmware again, do everything the same way, but this time check the repartition checkbox, and click the PIT button and select the .pit file you just downloaded. Now click start and it should work. We hope....!
DocHoliday77 said:
Ahhh! PIT=Partition Information Table
Odin uses this to know the partition layout of the device so it knows where to flash each part of the firmware. It usually gets this directly from the device, but occasionally it becomes corrupted or lost.
There is a thread in the General section that has all our PIT files. Should be on the first page right now, maybe second. Download the correct one for your device. (My last post has a link to my repo with all PIT files)
Now try flashing your firmware again, do everything the same way, but this time check the repartition checkbox, and click the PIT button and select the .pit file you just downloaded. Now click start and it should work. We hope....!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1848267 are you talking about this page for the PIT file? because when i clicked this link it doesnt work and it pops up as an unsafe page on my myWOT.
Ok so i found a PIT file for my phone and when i tried to flash with the odin v3.07 it got stuck on Leave CS. I looked up a solution for this and it was to use an older version of odin, v1.85. After i tried this I made more progress but it failed again.
ojhasha said:
http://forum.xda-developers.com/showthread.php?t=1848267 are you talking about this page for the PIT file? because when i clicked this link it doesnt work and it pops up as an unsafe page on my myWOT.
Click to expand...
Click to collapse
Yes that's the thread. Which did it say was unsafe? The thread itself, or my link in the post in that thread?
If its my link, it just goes to my folder on http://androidfilehost.com. its a file sharing site solely for android stuff from sites like xda. Its perfectly safe. If that's the one being flagged its probably because it has files you can download m
ojhasha said:
Ok so i found a PIT file for my phone and when i tried to flash with the odin v3.07 it got stuck on Leave CS. I looked up a solution for this and it was to use an older version of odin, v1.85. After i tried this I made more progress but it failed again.
Click to expand...
Click to collapse
Where did you get the pit? May be that its either a corrupt download or for the wrong device.
And did you try with Odin 3.09?
DocHoliday77 said:
Yes that's the thread. Which did it say was unsafe? The thread itself, or my link in the post in that thread?
If its my link, it just goes to my folder on http://androidfilehost.com. its a file sharing site solely for android stuff from sites like xda. Its perfectly safe. If that's the one being flagged its probably because it has files you can download m
Where did you get the pit? May be that its either a corrupt download or for the wrong device.
And did you try with Odin 3.09?
Click to expand...
Click to collapse
It was invisibleK's link that was unsafe. I used your 16GB Pit file in here, http://www.androidfilehost.com/?w=files&flid=6471 and i got the same result. I dont remember where i got the other pit. I got stuck on Leave CS on the odin 3.09 and when i click start it failed again with the repartition failed.
You are still removing the sdcard before flashing, right?
I have no idea if this could help, but theres a program here on xda called PIT magic. Maybe take a look in that thread to see if you find anything useful.
You can try flashing the PIT only, no firmware selected, but I dont know if this would work or not.
Only other thing I can think of is to try everything over again with the NC2 firmware.
Try that first, but you can also try flashing cwm or TWRP with odin. If we can get recovery on there we might be able to try other stuff with that.
DocHoliday77 said:
You are still removing the sdcard before flashing, right?
I have no idea if this could help, but theres a program here on xda called PIT magic. Maybe take a look in that thread to see if you find anything useful.
You can try flashing the PIT only, no firmware selected, but I dont know if this would work or not.
Only other thing I can think of is to try everything over again with the NC2 firmware.
Try that first, but you can also try flashing cwm or TWRP with odin. If we can get recovery on there we might be able to try other stuff with that.
Click to expand...
Click to collapse
sorry i didnt respond in a while, I was really busy with homework. I tried what you said and still no sign of success. I brought my phone to a repair shop and they said the motherboard is damaged and it needs to be replaced for 150$. I hope this guy is just bull****ting me, can anyone confirm? I really hope there is still light at the end of the tunnel right now.
Its hard to say. Motherboards do go bad, usually an issue with the memory. Its pretty rare, but it does happen, and the frequency has been increasing since these devices are starting to get a little old now.
But $150 for a replacement is, imo, a rip off. You can find used boards on ebay for under $100. If you csn use a screwdriver and can be gentle with the ribbon cables, its a super easy swap. Just check the videos to see.
DocHoliday77 said:
Its hard to say. Motherboards do go bad, usually an issue with the memory. Its pretty rare, but it does happen, and the frequency has been increasing since these devices are starting to get a little old now.
But $150 for a replacement is, imo, a rip off. You can find used boards on ebay for under $100. If you csn use a screwdriver and can be gentle with the ribbon cables, its a super easy swap. Just check the videos to see.
Click to expand...
Click to collapse
do you recommend me doing it? or are there more alternatives.
If the memory itself has gone bad, that's your best option. It is possible to change just the memory chip, but the part is probably hard to find and it requires a higher level of soldering skills.
There's a video of this, if I can find it again ill post the link.
Here's the video to the emmc replacement for international S3, should be similar but will require BGA soldering skills. https://www.youtube.com/watch?v=rOYo9AcUQQI
I thought about attempting to do this for my T999v, but a EMMC chip is about 35-50 bucks.
yellowonion said:
Here's the video to the emmc replacement for international S3, should be similar but will require BGA soldering skills. https://www.youtube.com/watch?v=rOYo9AcUQQI
I thought about attempting to do this for my T999v, but a EMMC chip is about 35-50 bucks.
Click to expand...
Click to collapse
did you have my symptoms? did you ever fix your phone? if so please share, i want to get my phone back in the cheapest way possible.
PS. I charged my phone today and the red led light showed up, that means my motherboard isnt broken right?
Not necessarily. It means there is a problem and requires special drivers and programs to fix, (or the debrick sd card). It basically just means the computer sees something is plugged in. If the memory has gone bad it could very well still give the red led and/or boot from the sd.
The only good way to verify the board (or memory) needs replacing would be to go to a second shop and ask them to attempt a jtag repair. If they tell you the same thing as the first shop, ask if they can be more specific about what happened when they attempted the jtag repair. At this point though, its a pretty good guess that the memory has gone bad.
How do i get a rom on my note 4 i have sprint running N910PVPS4DPE
peterogg said:
How do i get a rom on my note 4 i have sprint running N910PVPS4DPE
Click to expand...
Click to collapse
Did you try Samsung Kies on. PC?
jimmbomb said:
Did you try Samsung Kies on. PC?
Click to expand...
Click to collapse
Hey I always use TWRP to flash Supersu to root but I was wondering cause Ive been asked several times what easiest way to root. My question is = Does CF Auto Root still work for our device or is it just for older firmware? Thanks in advance!
What's the best way to update to the latest OTA on a rooted phone without losing data or root?
Sent from my SM-N910P using XDA-Developers mobile app
skanndelus said:
What's the best way to update to the latest OTA on a rooted phone without losing data or root?
Sent from my SM-N910P using XDA-Developers mobile app
Click to expand...
Click to collapse
With systemless root can't we just flash back stock kernel and recovery, to accept ota. Or does phone still not pass system check for ota. I've never tried myself so I was wondering.
My phone is on PD1 via OTA update.
Unrooted and stock as bones in a bag.
Yet, Now it refuses to check for updates anymore.
Manually or auto update checks via wifi.
Im locked out of latest updates.
Any ideas?
Even keis says up to date, even though the PE1 has been out for a while.
Any id
Thanks.
peterogg said:
How do i get a rom on my note 4 i have sprint running N910PVPS4DPE
Click to expand...
Click to collapse
First step is to use Odin to flash twrp or cwm ( I use twrp)
After that boot to twrp and create a back up (always do a back up)
Then go to wipe, advanced wipe and wipe dalvik, system,data, and cache.
From there go to install and select the rom you want to install and swipe to to install. Make sure your phone is on the correct baseband and firmware version to run the rom otherwise you will have issue like WiFi not turning on and camera not focusing! Reading the OP of the rom is very important. Being on PE1 you would probably have to downgrade to OK1 or PC1/PD1 for majority of roms for now. Freeze has a page where he has all the firmwares and their baseband, you can just dl them and flash them through Odin. Let me know if you need anything explained. If you mean how to literally get the rom onto the phone, I usually will just download or put the SD card into my computer. Another good option is samsung side sync/android file transfer
---------- Post added at 12:23 AM ---------- Previous post was at 12:21 AM ----------
jimmbomb said:
My phone is on PD1 via OTA update.
Unrooted and stock as bones in a bag.
Yet, Now it refuses to check for updates anymore.
Manually or auto update checks via wifi.
Im locked out of latest updates.
Any ideas?
Even keis says up to date, even though the PE1 has been out for a while.
Any id
Thanks.
Click to expand...
Click to collapse
Did you manually unroot? Or did you flash back to a stock? You need to completely flash a stock firmware to take an OTA.
---------- Post added at 12:25 AM ---------- Previous post was at 12:23 AM ----------
aaron74 said:
Hey I always use TWRP to flash Supersu to root but I was wondering cause Ive been asked several times what easiest way to root. My question is = Does CF Auto Root still work for our device or is it just for older firmware? Thanks in advance!
Click to expand...
Click to collapse
I would say go with manually flashing root. CF auto root hasn't worked for me in a long time. Besides majority if roms you'll find are prerooted anyway so there's no reason to really have to flash a root. Unless of course you're rooting stock.
I have never rooted. Always bone stock since new and always have OTA the updates. 3 maybe so far.
Still cant OTA anymore
hi every one
i have a question
i just bought a sprint galaxy note 4 and im living outside USA and my problem is that i have this annoying message of handsfree activation and i cant also select cdma or lte i just can use gsm
my android version is marshmallow 6.0.1
and my device isnt rooted
so please help me to unlock my phone and what is the best way to root it safely
Hi, mine it's the same situation, anybody can help us with that because the gsm speed is to slow for navigate, thanks in advance.
I don't know if this thread is still active.
Okay,
So I have a Sprint 32gb model Note 4 SM-N910P UD, I was experiencing the random reboot issue so I removed the sim card, thought it was fixed and tried to install a sprint pushed update via the phones normal process. It power cycled in the update and now it's pretty bricked, I can't do a factory reset or clear cash. If I turn it on it goes straight into the "Firmware upgrade encountered an issue screen"
Now I try to be pretty self sufficient so I did some reading and downloaded two versions of Kies (both of which don't recognize my device) I downloaded three versions of Odin and have been attempting to restore with stock platforms. This is where I ran into my problem, I know nothing about this stuff and I am completely lost. I tried to go to Best Buy and their Samsung techs couldn't help me.
I've tried searching the site, but all the links people provide are to multiple versions of TWRS and basebands, but I don't know what those are or which ones I am supposed to download or what slot or order they are supposed to go into in Odin to re-flash this device, I keep getting "need PIT file" or other errors.
So I am throwing myself at the mercy of the court, is there an idiots guide to how I get this phone back up and running in a basic configuration? I don't need the latest update, or to even save the data that was on it before, I just need it to run like normal and I'll never download an update again. If you can link me to the thread of just tell me "look dummy download this files and install them in this order" I will be forever in your debt.
The_Malhavoc said:
Okay,
So I have a Sprint 32gb model Note 4 SM-N910P UD, I was experiencing the random reboot issue so I removed the sim card, thought it was fixed and tried to install a sprint pushed update via the phones normal process. It power cycled in the update and now it's pretty bricked, I can't do a factory reset or clear cash. If I turn it on it goes straight into the "Firmware upgrade encountered an issue screen"
Now I try to be pretty self sufficient so I did some reading and downloaded two versions of Kies (both of which don't recognize my device) I downloaded three versions of Odin and have been attempting to restore with stock platforms. This is where I ran into my problem, I know nothing about this stuff and I am completely lost. I tried to go to Best Buy and their Samsung techs couldn't help me.
I've tried searching the site, but all the links people provide are to multiple versions of TWRS and basebands, but I don't know what those are or which ones I am supposed to download or what slot or order they are supposed to go into in Odin to re-flash this device, I keep getting "need PIT file" or other errors.
So I am throwing myself at the mercy of the court, is there an idiots guide to how I get this phone back up and running in a basic configuration? I don't need the latest update, or to even save the data that was on it before, I just need it to run like normal and I'll never download an update again. If you can link me to the thread of just tell me "look dummy download this files and install them in this order" I will be forever in your debt.
Click to expand...
Click to collapse
Sounds like you need the 4 file repair firmware. At least this is where i would start. I'll try to find you the links and guide. Give me some time and I'll get back to you.
aaron74 said:
Sounds like you need the 4 file repair firmware. At least this is where i would start. I'll try to find you the links and guide. Give me some time and I'll get back to you.
Click to expand...
Click to collapse
I really appreciate it, take as much time as you need I'm just happy to have help from someone more experienced than me.
@The_Malhavoc
Ok, so this is what i would try first, since you said Odin gives Pit file error.
To start, uninstall all Samsung software (like kies) from your pc. Also uninstall Odin. I guess Odin don't install, but use the one in this post.
Download and install Samsung drivers from here to your pc.
Now download Odin 3.11.1 from here!
Unzip odin to your desktop.
Download the N910P repair firmware here! You'll need to unzip this. See below.
Ok now I provided all the files here. But now continue to this post and read carefully and follow directions!
https://forum.xda-developers.com/showpost.php?p=68854735&postcount=1
I hope this helps and all you have is a software issue!
---------- Post added at 08:35 PM ---------- Previous post was at 08:26 PM ----------
The_Malhavoc said:
I really appreciate it, take as much time as you need I'm just happy to have help from someone more experienced than me.
Click to expand...
Click to collapse
Fyi, i can't guarantee this will work. I personally have never needed to use it, or try it. But i know it has the pit file in this. So i figured it'd might help.
---------- Post added at 08:40 PM ---------- Previous post was at 08:35 PM ----------
@The_Malhavoc
Before you try this, respond back to me. So i know You didn't start yet. I'm trying to find you another solution.
aaron74 said:
@The_Malhavoc
Ok, so this is what i would try first, since you said Odin gives Pit file error.
To start, uninstall all Samsung software (like kies) from your pc. Also uninstall Odin. I guess Odin don't install, but use the one in this post.
Download and install Samsung drivers from here to your pc.
Now download Odin 3.11.1 from here!
Unzip odin to your desktop.
Download the N910P repair firmware here! You'll need to unzip this. See below.
Ok now I provided all the files here. But now continue to this post and read carefully and follow directions!
https://forum.xda-developers.com/showpost.php?p=68854735&postcount=1
I hope this helps and all you have is a software issue!
---------- Post added at 08:35 PM ---------- Previous post was at 08:26 PM ----------
Fyi, i can't guarantee this will work. I personally have never needed to use it, or try it. But i know it has the pit file in this. So i figured it'd might help.
Click to expand...
Click to collapse
I understand completely about no guarantee it'll work, but its more than I had so I'll give it a go. I wasn't expecting a reply so quickly and left my stuff at the office. Ill get it a shot tomorrow and report back, thank you so much for taking the time to help out a lost newbie have a great day!
The_Malhavoc said:
I understand completely about no guarantee it'll work, but its more than I had so I'll give it a go. I wasn't expecting a reply so quickly and left my stuff at the office. Ill get it a shot tomorrow and report back, thank you so much for taking the time to help out a lost newbie have a great day!
Click to expand...
Click to collapse
Ok great. Cause I'm trying to find you an easier firmware to try first. So don't try that just yet. I'll post back shortly.
Edit. What's your current firmware?
The_Malhavoc said:
I understand completely about no guarantee it'll work, but its more than I had so I'll give it a go. I wasn't expecting a reply so quickly and left my stuff at the office. Ill get it a shot tomorrow and report back, thank you so much for taking the time to help out a lost newbie have a great day!
Click to expand...
Click to collapse
Ok Im back. Before You do what I first told you. I want you to follow this guide. It will download you a firmware with a pit file. I actually have the file but it will take 8 hours for me to upload. so just do this.
First, All these links are from this post here. Its an old program "SamFirm" but it still works.
But Im providing shortcuts here for you. To simplify this process.
1. Download Samfirm0.3.6.zip Here!
2. It requires .NET Framework 3.5 (Microsoft Visual C++ 2008 Redistributable Package (x86) and Microsoft Visual C++ 2010 Redistributable Package (x86) installed)
3. So Download and Install above Links!
4. Unzip samfirm into its own directory.
5. Open it up and run as an Admin!
Now in Samfirm put in following info: (check pics)
Model== SM-N910P
Region== XAS (or if you want sprint default logo at boot then use SPR)
Check the box== Auto
and also box== Binary Nature
Then Click Check Update
It should show it found firmware SM-N910P/XAS/N910PVPS4DPK1/N910PSPT4DPK1/N910PVPS4DPK1/N910PVPS4DPK1
Make sure both boxes == Check CSC && Decrypt are both selected and Click Download!!!
IT'LL Download and Decrypt a special binary firmware, that will contain a PIT file. When you flash this file with Odin, It will completely wipe your device.
When its done just unzip the file. And then you will have a TAR.MD5 file to use with Odin!!
In Odin, Load this file to AP slot. Only select 'F.Reset Time' & 'AutoReboot' the first time, just like a normal flash.
Hope This Helps Ya!!! If This file doesnt solve your problem, you could try that other file from previous post, if you wish!
But just try this and let me know what happens!!
Good Luck!!
No luck,
I downloaded ALL_SPT_N910PVPS4DPK1_N910PSPT4DPK1_CL9120850_QB11420407_REV00_user_low_ship_MULTI_CERT.tar .md5 from Samfirm then extracted it.
Downloaded and installed odin 3.11.1 from the above link and ran as administrator.
Checked the AP box and linked it to the extraced md5 file, made sure autoreboot and f. reset time were the only things checked.
Started phone in download mode using vol down + home + power, then pressed up to enter download mode and plugged the usb into the computer.
Once Odin registered my phone with the "added" notification I clicked start.
Odin read:
<id:0/003> Odin engine v(ID:3.1101)...
<id:0/003> File analysis..
<id:0/003> SetupConnection..
<id:0/003> Initialization..
<id:0/003> Set PIT file..
<id:0/003> DO NOT TURN OFF TARGET!!
<id:0/003> FAIL!
<id:0/003>
<id:0/003> Re-Partition operation failed.
<OSM> ALl threads completed. (succed 0/ failed 1)
Meanwhile my Note read:
ddi: mmc_read failed
ODIN MODE (High Speed)
etc. etc.
Secure download: enable
UDC Start
ODIN: flash read failure
Error: There is no pit binary.
so barring any failure on my part (which I'll be the first to admit is very likely) I may have to try again using the first message you suggested. I'll hold off for now just to see if I did anything wrong, considering I've heard that if I manually try flashing a PIT I could hard brick my phone permanently and it should only be as a last resort.
In any case no matter how it works out, thanks again Aaron for taking the time to help me out. I just saw how to add thanks to the posts, so I'll be doing that now.
The_Malhavoc said:
No luck,
I downloaded .
Click to expand...
Click to collapse
Ok, well it definitely sounds like you got the emmc problem that i see floating around here.
I don't have any experience with it. But a couple more suggestions.
1. Try this file again. But in Odin select 'F.Reset' & 'Re- partition'. And don't select ' auto reboot '. Let it flash, and if successful, when done pull battery and reboot to recovery then wipe and reset.
2. If that is no go. Try the first solution i pointed you to.
If neither these work. Then its beyond me. Sorry.
Hope you get one of these to work for you. :fingers-crossed:
Edit. I should have mentioned, if your phone has twrp and you can boot to it. You should make a complete backup especially the efs. And copy and save it off phone.
Edit 2. You could try posting your question to that first thread i mentioned to you.
Why my SM-N910P the FRP couldn't activated.
I did a lot of factory resets but that FRP didn't activated at all.
I am on 6.0.1 PJ1 and bought it as a second hand device not new.
Why this happened... Could somebody explain this weird thing to me?