Related
I was angry at my current rom which was on MTD so i decided just to you the old samsung "phone flash utility" (Epic4G_FroyoUpgrade_EB13.exe) that was uploaded on their site like a year ago to go back to stock. well i think since the phone was MTD it didnt work and now its stock at the connect cable screen, is there anything i can do?
I am running CleanGB MTD. The first time I tried to install it I had a bad download & needed to redo it from scratch. I used the Samsung EB13 Windows Installer utility to restore my phone back to stock & had no problems at all. It was up & running on MTD just had a few errors that I did not have time to fix that morning & I ran it for a few days after restoring with the utility, rooting, & restoring my backup. But now I'm enjoying the MTD goodness.....
Can you get back into download mode?
If so I would get a different USB cable & try running the installer again.
endurance1 said:
I was angry at my current rom which was on MTD so i decided just to you the old samsung "phone flash utility" (Epic4G_FroyoUpgrade_EB13.exe) that was uploaded on their site like a year ago to go back to stock. well i think since the phone was MTD it didnt work and now its stock at the connect cable screen, is there anything i can do?
Click to expand...
Click to collapse
from what ive been reading on the threads, i believe you can just odin back, and back sure you have reboot and re-partition checked marked.
I found out what the problem was. I should have known this because this happened to me once before. I was using my front USB ports. Front ports on most pc's are only 1.0 and you need to use the back 2.0 ones to work. Most people think its cable issues but its usually just USB port. This samsung utility is a complete gem! screw odin. thanks for the response!!!
endurance1 said:
I found out what the problem was. I should have known this because this happened to me once before. I was using my front USB ports. Front ports on most pc's are only 1.0 and you need to use the back 2.0 ones to work. Most people think its cable issues but its usually just USB port. This samsung utility is a complete gem! screw odin. thanks for the response!!!
Click to expand...
Click to collapse
Glad you got it working. I wasn't sure if the Samsung utility repartitioned...now I know...thanks.
Sent from my SPH-D700 using XDA App
endurance1 said:
I found out what the problem was. I should have known this because this happened to me once before. I was using my front USB ports. Front ports on most pc's are only 1.0 and you need to use the back 2.0 ones to work. Most people think its cable issues but its usually just USB port. This samsung utility is a complete gem! screw odin. thanks for the response!!!
Click to expand...
Click to collapse
Good to hear!!
Glad you got it fixed......
thanks guys. Yeah ive been using that sammy file since ec05 came out. this is the 3rd brick maybe 4th it got me out of. it works for EVERYTHING. better than odin.
Wow, I didn't know this exe thing existed. Odin has NOT been working on my home PC for tje past few weeks(months?) and that has kept me from trying anything that would require Odin to recover from, i.e. mtd.
Glad I read here in the Q&A pretty regularly. Most of the time I'm seeing if there's anyone I can help, but times like this I end up learning new things.
sent from my secret underground bunker
That sounds like a great thing to have sitting on my computer. I tried to find it but was not successful. Can anyone point me to a copy of it.
Thanks
George
ghmacdonald said:
That sounds like a great thing to have sitting on my computer. I tried to find it but was not successful. Can anyone point me to a copy of it.
Thanks
George
Click to expand...
Click to collapse
I am at work so I cannot post the file I have, but I put the file name in & searched in Google & several download options popped up.
Google Search: Epic4G_FroyoUpgrade_EB13.exe
Check it out & let me know if you need me to post a copy of the file, I saw several already on services like multiupload in the search.
Look at the thread stickied in development. The Samsung tool won't work all the time.
-Marcusant via Tapatalk
So my friend gave me his phone to see if I could fix it. It loops in CWM and won't get out of it and I can't connect with odin to it. (My phone connects just fine.) This is the only other thing I can think of. Anyone else got other ideas?
---------- Post added at 01:25 PM ---------- Previous post was at 01:08 PM ----------
Well tried it and phone still not discovered by the PC. I am at a loss at what to do. I know my friend tried to install some type of rom to it and didn't make a backup. It boots in to CWM non-stop and I can flash zips but it never leaves that loop even after the flashes. I can boot into Download mode but the phone won't be recognized. Tried both Odin and this. The phone is getting charged through the cable though which confuses me even more. Any help?!
Anyone have any ideas?! I am at a loss at what to do!
KillerFu said:
Anyone have any ideas?! I am at a loss at what to do!
Click to expand...
Click to collapse
Use a different cable with odin... it may be charging it but its not getting a data connection... also put into download mode and plug in usb... then "jiggle" the cord until it recognizes it...
Sent from my SPH-D700 using Tapatalk
Uninstall and reinstall the drivers. Then also try Odin with the battery and phone plugged in. Make sure you use a better cable than stock.
I was running the ICS leaked release and decided to try another ROM. I think my mistake was that I didn't flash a custom recovery like Rogue's and just threw the ROM on my SD, went into the stock recovery that came with the ICS leaked ROM, ran Calkulin's wipe and flashed the ROM.
The phone won't boot up. I can get into Download Mode but I don't know where I can download a stock tar to flash in ODIN 1.85. If I try and go to the stock recovery it doesn't work.
Any help would be appreciated.
***EDIT***
It's still stuck at the data.img portion of the process (end process). It's probably not going far from there.
I can't get into the stock recovery but it does allow the download mode still.
Android300ZX said:
I was running the ICS leaked release and decided to try another ROM. I think my mistake was that I didn't flash a custom recovery like Rogue's and just threw the ROM on my SD, went into the stock recovery that came with the ICS leaked ROM, ran Calkulin's wipe and flashed the ROM.
The phone won't boot up. I can get into Download Mode but I don't know where I can download a stock tar to flash in ODIN 1.85. If I try and go to the stock recovery it doesn't work.
Any help would be appreciated.
Click to expand...
Click to collapse
In the dev threads look for sfhubs oneclick el29. Download it and follow instructions. It will be fine.
Team-Nocturnal Blended ICS
Right here is all you need. http://forum.xda-developers.com/showthread.php?p=21134991
Then use autoroot to get cwm back.
Team-Nocturnal Blended ICS
I tried that earlier and it didn't work. I deleted all the files and will try it again. When I tried the steps it just hung at waiting for connection or something to that effect.
Android300ZX said:
I tried that earlier and it didn't work. I deleted all the files and will try it again. When I tried the steps it just hung at waiting for connection or something to that effect.
Click to expand...
Click to collapse
That really sound like you don't have the drivers quite right. When you open the regular odin, and your phone is in download mode, does a yellow box on odin show up? If not its the drivers.
Team-Nocturnal Blended ICS
bigtoysrock said:
That really sound like you don't have the drivers quite right. When you open the regular odin, and your phone is in download mode, does a yellow box on odin show up? If not its the drivers.
Team-Nocturnal Blended ICS
Click to expand...
Click to collapse
Yes. It shows COM port I in yellow which is a good thing because it recognizes something is connected.
Android300ZX said:
Yes. It shows COM port I in yellow which is a good thing because it recognizes something is connected.
Click to expand...
Click to collapse
Then the one click should work just fine. Make sure you follow his instructions to the T. Also on his page he has some drivers, you should install those, it uninstall or over write the old ones. Just to be sure.
Team-Nocturnal Blended ICS
Thanks. It looks like it's working now. It's installing right now and then we shall see but I'm pretty sure it'll work. I'll leave it stock for now until ICS comes out. I'm so buy working on my new car that I barely have time to geek out anymore on my phone.
Don't try to flash anything with stock recovery ...it has to be officially signed by Samsung ...won't work
Sent from my SPH-D710 using XDA App
It didn't work. Last night I went to run the EL29 Restore - Rooted and it got stuck on the data.img portion. The progress bar on the phone and computer just hung there. I disconnected the cable and went to bed (after 1.5 hours of it just sitting there stuck).
I'm trying it again today and lets see if it gets stuck.
I'm reflashing EL29 over the FB21 (w/e the leaked version of ICS was) I had. Is that the issue?
Sorry but I think your bricked. There is a "Stuck at Data.img" thread here in q&a.
The issue still isn't repairable.
The way you went about getting stuck here is a little different tho. So hopefully I'm wrong.
Good luck
Are you stuck in a bootloop? If so, do you get any further than the Samsung splash screen?
Try re-flashing the ICS leak. I read somewhere that it could be a filesystem issue with switching to and from GB. If that doesn't work, maybe you'll have better luck with using ODIN as opposed to the one-click method. You'll find the tars here-
http://forum.xda-developers.com/showthread.php?t=1391732
In most cases you'll be flashing them in PDA, but read everything closely, and follow the steps.
If you have insurance, I almost suggest going to Sprint while it still seems there's no evidence you've been flashing (yellow triangle), as they'll likely just replace it for you.
If none of that works, then it sounds like a rare problem that happened to mine a few months ago. This was the only thread I found at that time, but it was for AT&T's GSII.
http://forum.xda-developers.com/showthread.php?p=20834412#post20834412
I ended up getting a new one, but I would love to finally find a solution since I still have it. Pretty much the only thing I haven't tried is a JTAG service.
Juq said:
Are you stuck in a bootloop? If so, do you get any further than the Samsung splash screen?
Try re-flashing the ICS leak. I read somewhere that it could be a filesystem issue with switching to and from GB. If that doesn't work, maybe you'll have better luck with using ODIN as opposed to the one-click method. You'll find the tars here-
http://forum.xda-developers.com/showthread.php?t=1391732
In most cases you'll be flashing them in PDA, but read everything closely, and follow the steps.
If you have insurance, I almost suggest going to Sprint while it still seems there's no evidence you've been flashing (yellow triangle), as they'll likely just replace it for you.
If none of that works, then it sounds like a rare problem that happened to mine a few months ago. This was the only thread I found at that time, but it was for AT&T's GSII.
http://forum.xda-developers.com/showthread.php?p=20834412#post20834412
I ended up getting a new one, but I would love to finally find a solution since I still have it. Pretty much the only thing I haven't tried is a JTAG service.
Click to expand...
Click to collapse
If I turn on the phone I get a screen that says
"Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
I don't get to the point where it even shows me a Samsung logo; just straight to that screen.
When I go into Download Mode I see
ODIN MODE
Product Name: SPH-D710
Custom Binary DOwnload: No
Current Binary: Samsung Official
Here's the thread caspersfi mentioned. I'm reading through it myself now.
http://forum.xda-developers.com/showthread.php?t=1504808&highlight=stuck+at+data+img
Good luck!
Juq said:
Here's the thread caspersfi mentioned. I'm reading through it myself now.
http://forum.xda-developers.com/showthread.php?t=1504808&highlight=stuck+at+data+img
Good luck!
Click to expand...
Click to collapse
I'm reading it now. I want to add that it was CWM touch that messed up my phone because I had flashed that before attempting to flash another ROM since ICS build came with the default factory recovery. So I'm guessing my file system is corrupt. I'll keep reading through the thread. (I skipped to the last couple of pages.
Hey so can you still get into download mode? I ran into the same problem where it kept getting stuck in odin. Try a different usb cable and a different port. Odin is very fussy with usb cables. When I had the trouble I was using a Logitech usb cable. Switched to the one that came with my phone and it worked like a charm.
rbtrucking said:
Hey so can you still get into download mode? I ran into the same problem where it kept getting stuck in odin. Try a different usb cable and a different port. Odin is very fussy with usb cables. When I had the trouble I was using a Logitech usb cable. Switched to the one that came with my phone and it worked like a charm.
Click to expand...
Click to collapse
I'm using the one that came with the phone and I tried different ports. I don't have another cable to use but I doubt that will help me out. Thanks for the suggestions though.
Android300ZX said:
I'm using the one that came with the phone and I tried different ports. I don't have another cable to use but I doubt that will help me out. Thanks for the suggestions though.
Click to expand...
Click to collapse
I didnt think it was possible that a simple cable swap would help me when I was in the exact same position as you either but it sure did. What could it hurt to just try a different cable? I am sure you could borrow one from a friend just to try it. According to qbking77 samsung cables are pretty bad when it comes to using odin.
rbtrucking said:
I didnt think it was possible that a simple cable swap would help me when I was in the exact same position as you either but it sure did. What could it hurt to just try a different cable? I am sure you could borrow one from a friend just to try it. According to qbking77 samsung cables are pretty bad when it comes to using odin.
Click to expand...
Click to collapse
I will try that shortly then. I have a paper that's due today to write so school before phone, lol.
Alright i really hope it works, let us all know.
Sent from my SPH-D710 using XDA App
Hi all,
So I got the txt message from AT&T about upgrade available.
So I opened Keis and let it update. (I have a whole seperate issue with Kies; it will only read my Glide about 10% of the time).
Once I FINALLY got it to connect to my phone, I began the update process. FAIL
fail, fail, fail, 4 hours of fail.
i've tried every recommendation from every post i';ve come across, including uninstalling keis, running reg cleaner, rebooting, reinstalling.
i've trie 3 diff version of the samsung usb driver program, whatever u search for on this forum and google, i've tried it.
The best I have gotten is for Kies to actually recognize my phone and begin the update process, a few times, I saw no progress bar on the phone and the Kies window stayed on 0%.
The first time I actually sw a progress bar on my phone, it moved about 1/8th of an inch and stopped. I left if overnight, and when I got up this morning, it was the same.
So again today, on a different computer, I created a new user profile and tried some more; nada.
So I'm so desperate for ICS on this phone, I tried using that one click release of the leaked ICS, same thing. several times of not recognizing the phone, then finally
the progress bar on the phone moved a little bit, so I left it for over an hour and it didn't move.
At least this time, I could see that it was hung on the bootloader part.
I've tried this on two diff Win7 x64 machines and an XP pro machine; all the same results.
interesting part:
Once last night, I kept my temp folder open while Kies was doing it's thing, and I grabbed this file:
https://docs.google.com/open?id=0B_Sgf7j8WktibEJ4NXVva08zYmM
(i couldn't find any free file share sites that would let me upload a file this big.)
This is the actual ROM (or whatever you would call it)
Kies downloaded a file and named it whatever.tmp, as soon as I saw it, I copied it and extracted the contents with uniextract - that is where I got this .tar file from.
So what can I do with this file to install ICS on my phone?
I did try renaming it update.zip and copying it to my sdcard, I tried to "install update from sdcard", but I get an error about it not being signed.
For anyone who doesn't want to download a 600+MB file, this is what's inside it:
boot.img
cache.img
factoryfs.img
hidden.img
modem.bin
recovery.img
Not too sure if this belongs in development. It's a question, but the file is development purposes . Anyway you can use boot.img and a system dump of the official ICS to make a flashable zip, or theme some system apps, etc. The possibilites are endless
ericpeacock79 said:
Hi all,
So I got the txt message from AT&T about upgrade available.
So I opened Keis and let it update. (I have a whole seperate issue with Kies; it will only read my Glide about 10% of the time).
Once I FINALLY got it to connect to my phone, I began the update process. FAIL
fail, fail, fail, 4 hours of fail.
i've tried every recommendation from every post i';ve come across, including uninstalling keis, running reg cleaner, rebooting, reinstalling.
i've trie 3 diff version of the samsung usb driver program, whatever u search for on this forum and google, i've tried it.
The best I have gotten is for Kies to actually recognize my phone and begin the update process, a few times, I saw no progress bar on the phone and the Kies window stayed on 0%.
The first time I actually sw a progress bar on my phone, it moved about 1/8th of an inch and stopped. I left if overnight, and when I got up this morning, it was the same.
So again today, on a different computer, I created a new user profile and tried some more; nada.
So I'm so desperate for ICS on this phone, I tried using that one click release of the leaked ICS, same thing. several times of not recognizing the phone, then finally
the progress bar on the phone moved a little bit, so I left it for over an hour and it didn't move.
At least this time, I could see that it was hung on the bootloader part.
I've tried this on two diff Win7 x64 machines and an XP pro machine; all the same results.
interesting part:
Once last night, I kept my temp folder open while Kies was doing it's thing, and I grabbed this file:
https://docs.google.com/open?id=0B_Sgf7j8WktibEJ4NXVva08zYmM
(i couldn't find any free file share sites that would let me upload a file this big.)
This is the actual ROM (or whatever you would call it)
Kies downloaded a file and named it whatever.tmp, as soon as I saw it, I copied it and extracted the contents with uniextract - that is where I got this .tar file from.
So what can I do with this file to install ICS on my phone?
I did try renaming it update.zip and copying it to my sdcard, I tried to "install update from sdcard", but I get an error about it not being signed.
For anyone who doesn't want to download a 600+MB file, this is what's inside it:
boot.img
cache.img
factoryfs.img
hidden.img
modem.bin
recovery.img
Click to expand...
Click to collapse
You should be able to flash that with ODIN
Fact, this is the same file I downloaded from http://www.hotfile.com/dl/170800037/7fd1f5e/I927UCLH2_I927ATTLH2_ATT.zip.html
Worked flashing with ODIN on a unlocked Rogers I927R
enewman17 said:
You should be able to flash that with ODIN
Fact, this is the same file I downloaded from http://www.hotfile.com/dl/170800037/7fd1f5e/I927UCLH2_I927ATTLH2_ATT.zip.html
Worked flashing with ODIN on a unlocked Rogers I927R
Click to expand...
Click to collapse
groovy!!
so... what do i do in odin?
i've got it downloaded, but which option, etc do i need to select?
ericpeacock79 said:
groovy!!
so... what do i do in odin?
i've got it downloaded, but which option, etc do i need to select?
Click to expand...
Click to collapse
Power Phone into DOWNLOAD MODE, Pressing POWER and VOLUME UP till it boots
Using ODIN 1.85
wait for phone to appear
Uncheck F. Reset Time (only AUTO REBOOT should be checked)
Check the box next to PDA
using the PDA button select the .tar file
Press start, sit back and drink a beer
Then apply CWM I prefer 5.0.27 "EXACTLY THE SAME WAY AS YOU INSTALLED THE ROM WITH ODIN" http://forum.xda-developers.com/showthread.php?t=1458153 (it's not touch, but it keeps backups in img form rather than the .blob like CWM6. just make's it easier to handle backups.
In CWM "If you want root", apply http://downloads.noshufou.netdna-cdn.com/superuser/Superuser-3.2-RC3-arm-signed.zip
In CWM apply the LH2 Keyboard backlight fix http://forum.xda-developers.com/showthread.php?t=1848433
Its running pretty smooth so far, no major issues to report: but I had the camera giving me issues till I cleared data form the app. still gave a few stutters then the whole phone started running well after a few reboots and some settling time.
enewman17 said:
Power Phone into DOWNLOAD MODE, Pressing POWER and VOLUME UP till it boots
Using ODIN 1.85
wait for phone to appear
Uncheck F. Reset Time (only AUTO REBOOT should be checked)
Check the box next to PDA
using the PDA button select the .tar file
Press start, sit back and drink a beer
Then apply CWM I prefer 5.0.27 "EXACTLY THE SAME WAY AS YOU INSTALLED THE ROM WITH ODIN" http://dl.dropbox.com/u/9459955/recovery/testing/SGHI927R/v2/CWMR5x_i927_recovery.tar.md5 (it's not touch, but it keeps backups in img form rather than the .blob like CWM6. just make's it easier to handle backups.
In CWM "If you want root", apply http://downloads.noshufou.netdna-cdn.com/superuser/Superuser-3.2-RC3-arm-signed.zip
In CWM apply the LH2 Keyboard backlight fix http://forum.xda-developers.com/showthread.php?t=1848433
Its running pretty smooth so far, no major issues to report: but I had the camera giving me issues till I cleared data form the app. still gave a few stutters then the whole phone started running well after a few reboots and some settling time.
Click to expand...
Click to collapse
Thanks for you replies. I appreciate it very much.
(here's something weird, when viewing post in thread, it stops after the word beer. I didn't see the other stuff until I clicked reply :-/ )
unfortunately, it's doing the same thing as before... ODIN is stuck on boot.img for about ten minutes now
any thoughts.... anyone?
I want ICS on this phone SO bad.
( would it be related to the fact that I substituted beer for southern comfort? )
A few posts up I posted a link to a download of the new update that is what I used It worked perfectly. Extract from the zip and you'll have a .tar.md5 file which just makes ODIN Check the md5 sum before flashing
Sent from my SGH-I927 ICS using xda premium
ericpeacock79 said:
Thanks for you replies. I appreciate it very much.
(here's something weird, when viewing post in thread, it stops after the word beer. I didn't see the other stuff until I clicked reply :-/ )
unfortunately, it's doing the same thing as before... ODIN is stuck on boot.img for about ten minutes now
any thoughts.... anyone?
I want ICS on this phone SO bad.
( would it be related to the fact that I substituted beer for southern comfort? )
Click to expand...
Click to collapse
I checked your files md5 sum to the .tar file I used, and they are the same cbd0c11c1aa578f6bcdb06099b5d3102 so you should be good to go flashing the .tar file you captured during the keis install. Maybe try flashing CWM first boot into it and format everything then try installing the rom via ODIN. Try a new cable and/or make sure the phone is plugged into a usb plug in the rear of the computer.
enewman17 said:
A few posts up I posted a link to a download of the new update that is what I used It worked perfectly. Extract from the zip and you'll have a .tar.md5 file which just makes ODIN Check the md5 sum before flashing
Sent from my SGH-I927 ICS using xda premium
Click to expand...
Click to collapse
same thing with that one... stuck on boot.img in Odin, progress bar on phone moved about 1/8th of an inch.
i left it overnight again, i just now got up and see it's not moved....
that makes me a sad panda....
i guess next, i'll try to do this on ubuntu, using heimdall....
arrrgh.
ericpeacock79 said:
same thing with that one... stuck on boot.img in Odin, progress bar on phone moved about 1/8th of an inch.
i left it overnight again, i just now got up and see it's not moved....
that makes me a sad panda....
i guess next, i'll try to do this on ubuntu, using heimdall....
arrrgh.
Click to expand...
Click to collapse
That is a real bummer, I'm sorry it didn't work for you. It should only take a few minutes, I don't have any other ideas other than maybe try flashing the UCLG9 leak then re-trying to flash your tar file. The leak contains a new bootloader, I had flashed that a few weeks prior to the new update.
Also did you try flashing CWM with Odin just to see if it would flash seems like it's probably a computer problem rather then your phone.
Sent from my SGH-I927 using xda premium
Hello,
Sorry to 'thread-jack' but hopefully a minor annoyance.
Can someone post just the 'modem.bin' file from the I927UCLH2 update?
FYI, in hopes of enabling 3G/HSPA voice calling on Galaxy Tab 10.1..
Using European Tegra 2 based phone modem (from I9103), 2G voice calling works.
Trying to avoid downloading the entire .tar for one file =p
To clarify - European Tab 10.1 users are fine; AT&T and Rogers Tab 10.1 users can currently use 2G only.
T-Mobile - apparently 'their' phone counterpart uses a combo of 2 modem-related files?
But I digress... (don't think I can embed links yet) thread is in Tab 10.1 Dev forum.
Thank you!
enewman17 said:
That is a real bummer, I'm sorry it didn't work for you. It should only take a few minutes, I don't have any other ideas other than maybe try flashing the UCLG9 leak then re-trying to flash your tar file. The leak contains a new bootloader, I had flashed that a few weeks prior to the new update.
Also did you try flashing CWM with Odin just to see if it would flash seems like it's probably a computer problem rather then your phone.
Sent from my SGH-I927 using xda premium
Click to expand...
Click to collapse
i did try flashing the CWM and it did the same thing stalling after about one second into it, same with UCLG9 leak one-click executable. (at least using that told me it was stuck on trying to flash the boot image)
I'm about to build a fresh win7 x86 VM with nothing but .net and VC++ runtime installed, to rule out both my living room and home office comps as the problem.
if it still don't work, the i'll build a fresh ubuntu VM and try it with heindall
Thank you, enewman17, for all your help. it is really appreciated. :good:
if it still don't work, i will call Samsung and demand a replacement phone.
spamam1:
modem.bin - 12,289KB
I used rom from 1st post and it's working flawless but is there any way to "super-duper" wipe this phone? after update I still have all my data, programs and even unlocked simlock. I will probably send it on warranty so I would like to have stock rom
edit: i think ICS is much slower than GB
timon12 said:
I used rom from 1st post and it's working flawless but is there any way to "super-duper" wipe this phone? after update I still have all my data, programs and even unlocked simlock. I will probably send it on warranty so I would like to have stock rom
edit: i think ICS is much slower than GB
Click to expand...
Click to collapse
Settings --> Back up and reset ---> Factory data Reset.....As it states this erases all data on the phone.
I'm getting it to boot up after cwmr but it hangs on the installing applications screen. Left it for an hour and still the same
are you kidding me?!?!
ARE YOU FREAKING KIDDING ME?!?!?!?!
ok, so here's what finally worked:
using a different USB cable that i found laying around.
for all of samsung's rhetoric about "only use the oem data cable" "never use anything but the oem data cable" "blah blah oem usb cable blah blah"
after trying this on like 6 different computers all with same results, i just found a usb cable laying around at work and decided to try it, just for the heck of it - IT DIDNT TAKE 5 MINUTES TO FLASH!
I AM NOW ICE CREAM SANDWICH!
seriously, FOUR days of banging my head on the wall, and it was the freaking OEM data cable that was the problem.
:silly::silly::silly::silly:
ericpeacock79 said:
are you kidding me?!?!
ARE YOU FREAKING KIDDING ME?!?!?!?!
ok, so here's what finally worked:
using a different USB cable that i found laying around.
for all of samsung's rhetoric about "only use the oem data cable" "never use anything but the oem data cable" "blah blah oem usb cable blah blah"
after trying this on like 6 different computers all with same results, i just found a usb cable laying around at work and decided to try it, just for the heck of it - IT DIDNT TAKE 5 MINUTES TO FLASH!
I AM NOW ICE CREAM SANDWICH!
seriously, FOUR days of banging my head on the wall, and it was the freaking OEM data cable that was the problem.
:silly::silly::silly::silly:
Click to expand...
Click to collapse
It's always something.... Haha
Glad it's working now.
Sent from my SGH-I927 using xda premium
ericpeacock79 said:
ok, so here's what finally worked:
using a different USB cable that i found laying around.
Click to expand...
Click to collapse
Same flash problem here, same exact solution. Flimsy micro-USB cable was the culprit. ODIN would get partially through and almost always fail during SetupConnection or Initialzation or NAND Write Start. Wasted about 12 hours testing a dozen possible causes. Changed to the thicker OEM cord and BAM!
Thanks!!
Funnny what a cable could do lol
Samsung galaxy SIII hard bricked will not boot no power, but ODIN 1.85 can recognize it, (not the new Odins), when I try to re-flash it with Odin I get stuck at setupConnection..
any help? can I use the small USB mod
If you don't mind me asking, how you brick your phone?
Sent from my SGH-T999 using xda app-developers app
i have the same problem i used the Odin3 v1.85 and installed CF-Root-SGS3-v6.4 zip but it failed. so then i tried to reboot it and said firmware update encountered an issue and something else. then i looked up how to unbrick and the post said to downloaded the zip CF-Insecure-SGS3_XX_NEE_ALE8-v1.2 and used Odin to install now i got nothing but a black screen buy it will go into download mode and Odin read it
You're not hard bricked if Odin can read your phone. Reboot your computer then reconnect and flash a stock rom to be safe.
chubby1_8888 said:
i have the same problem i used the Odin3 v1.85 and installed CF-Root-SGS3-v6.4 zip but it failed. so then i tried to reboot it and said firmware update encountered an issue and something else. then i looked up how to unbrick and the post said to downloaded the zip CF-Insecure-SGS3_XX_NEE_ALE8-v1.2 and used Odin to install now i got nothing but a black screen buy it will go into download mode and Odin read it
Click to expand...
Click to collapse
If I'm not wrong ODIN uses TAR files and not ZIP files. Try unziping and see if there is a TAR file if there is then thats what you have to use in ODIN.
Same as OP's phone
Sprint s3 flash pacman JB and google apps the went to reboot recovery ask to reflash su yes phone powered off and no coming back on Odin does detect it on com05 when I plug it in but anything I try to do just says waiting on connection, will not go into recovery or download modes. is there anything I can do to fix it? kies or anything? and I edited the updater scripts to be able to flash pacman because every rom I tried would fail with error 7............ please help
Kevinreid1 said:
Sprint s3 flash pacman JB and google apps the went to reboot recovery ask to reflash su yes phone powered off and no coming back on Odin does detect it on com05 when I plug it in but anything I try to do just says waiting on connection, will not go into recovery or download modes. is there anything I can do to fix it? kies or anything? and I edited the updater scripts to be able to flash pacman because every rom I tried would fail with error 7............ please help
Click to expand...
Click to collapse
Do you get a message when you plug it into your computer? Does the red LED turn on? Editing the scripts is dangerous if you don't know what you are doing!
serio22 said:
Do you get a message when you plug it into your computer? Does the red LED turn on? Editing the scripts is dangerous if you don't know what you are doing!
Click to expand...
Click to collapse
followed the guides about it just removed from top to quotes dealing with checking versions of device.
Kevinreid1 said:
followed the guides about it just removed from top to quotes dealing with checking versions of device.
Click to expand...
Click to collapse
I'm not saying that was the problem or that you did it wrong, but maybe the ROM was forced to flash and was truly not compatible or was corrupt, bricks are highly likely to occur in this case
serio22 said:
I'm not saying that was the problem or that you did it wrong, but maybe the ROM was forced to flash and was truly not compatible or was corrupt, bricks are highly likely to occur in this case
Click to expand...
Click to collapse
The roms I have downloaded are supposed to be for Sprint s3 I was running stock JB 4.3 if that makes any difference, any help on what to do know, thinking of trying the unbrick mmc card trick .... idk what else to do... thanks : ) and something went wrong somewhere for sure... lol I also found out my exact model number if that helps. SPH-L710MBBSPR again thanks for you responses..
Ok, a few things I noticed....
1. You are using a very old version of Odin. I recommend only using 3.07 or 3.09.
2. The COM port box is yellow, which probably was trying to caution you about something.
3. You have a Sprint model S3. This is the T-Mobile S3 forum.
4. You have a Sprint S3, but were trying to flash old T999 firmware! This simply will not work, and if it were to flash, insta-brick!
What you need to do is start using the Sprint forums. Only flash items you find in those forums, and nothing else. While some of our roms might flash and boot on yours, they will never function very well. This is one of the things the asserts in an updater script are intended to protect against.
Finally, just a bit of posting advice. Please use proper punctuation. Small mistakes are ok, but posting with no punctuation at all just makes it difficult for people to read, and many will just close the thread and move to the next without bothering to help.
---------- Post added at 02:28 AM ---------- Previous post was at 02:25 AM ----------
Oops! Just realized the pic in the op wasn't yours! But still, theyre all good points you should check before flashing. Also make sure kies is uninstalled or disabled on your computer.
But most importantly, you need to be in the Sprint forums. We can help a bit here, but you need to ONLY use stuff from your devices forum. And a lot of it we simply may not be familiar with.
Good luck!
DocHoliday77 said:
Ok, a few things I noticed....
1. You are using a very old version of Odin. I recommend only using 3.07 or 3.09.
2. The COM port box is yellow, which probably was trying to caution you about something.
3. You have a Sprint model S3. This is the T-Mobile S3 forum.
4. You have a Sprint S3, but were trying to flash old T999 firmware! This simply will not work, and if it were to flash, insta-brick!
What you need to do is start using the Sprint forums. Only flash items you find in those forums, and nothing else. While some of our roms might flash and boot on yours, they will never function very well. This is one of the things the asserts in an updater script are intended to protect against.
Finally, just a bit of posting advice. Please use proper punctuation. Small mistakes are ok, but posting with no punctuation at all just makes it difficult for people to read, and many will just close the thread and move to the next without bothering to help.
---------- Post added at 02:28 AM ---------- Previous post was at 02:25 AM ----------
Oops! Just realized the pic in the op wasn't yours! But still, theyre all good points you should check before flashing. Also make sure kies is uninstalled or disabled on your computer.
But most importantly, you need to be in the Sprint forums. We can help a bit here, but you need to ONLY use stuff from your devices forum. And a lot of it we simply may not be familiar with.
Good luck!
Click to expand...
Click to collapse
Thank you.. I knew I was in the wrong forum and that is why I said my s3 was a Sprint device... My problem however was the same exact problem. I got it fixed with file from another forum, while follow info from yet another forum, the file that worked for me was HomefixSprint_S3_L710.img the debrick_sph_l710.img would not work for me. I used win32diskimager and burned .img file to class 10 32gb card, stuck it in went in to download mode and used odin to write firmware file... Anyway back up any running.. I didn't download any t-mobile roms or anything that wasn't for the Sprint S3, what I did do was try and load an older JB rom that was under V4.3, it wasn't that long ago when a person could flash any android version one wished, it looks like Samsung is getting as bad as Apple you can move up but not back. Any tips on how to safely downgrade? Anyway thanks for taking the time to respond. : ) Cause no one has in the Sprint S3 forum yet.
Kevinreid1 said:
it wasn't that long ago when a person could flash any android version one wished, it looks like Samsung is getting as bad as Apple you can move up but not back. Any tips on how to safely downgrade?
Click to expand...
Click to collapse
No, Samsung is not turning into apple, there is a reason you cannot downgrade from a Knox bootloader. And to downgrade, with this device we can just flash an older ROM and it will work, maybe its different with the Sprint variant? Try to search in their forums if you haven't already
I just inherited a t-mobile phone that was rooted. I installed the latest version of TWRP and tried to re-root it but now it's in a boot loop and on top of that I can't connect the phone to a computer b/c I get the "USB Device Not Recognized" message. I've re-installed the drivers and I've tried the toothpick trick. Nothing is working. What are my options?
jconway1968 said:
I just inherited a t-mobile phone that was rooted. I installed the latest version of TWRP and tried to re-root it but now it's in a boot loop and on top of that I can't connect the phone to a computer b/c I get the "USB Device Not Recognized" message. I've re-installed the drivers and I've tried the toothpick trick. Nothing is working. What are my options?
Click to expand...
Click to collapse
First wrong section...second I'd say flash a different Rom/kernel pair... or redo your recovery from Odin
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
bmg002 said:
First wrong section...second I'd say flash a different Rom/kernel pair... or redo your recovery from Odin
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
First, I believe this is the correct section - the phone I am working with is a T-Mobile Galaxy S II... Second, I can't Odin because I don't have a working usb connection. I've tried several different ROMS from this fine section and I get the same result... Boot Loop
If you flashed TWRP 2.6.3, that's your problem.
Flash 2.6.1
This is the wrong section because it has nothing to do with ROM development.
With that being said if you can still boot into twrp you still have hope. Try loading a different ROM into an SD card using a converter and slide back in the phone to properly wipe first then re flash.
I don't understand why you can't get a proper USB connection going but above suggestion may solve it.
Sent from my SGH-T989 using xda app-developers app
You could always get a SD card reader, connect t to ur PC, DL a flashable twrp 2.6.1.0 and flash the recovery, then flash a ROM an u should be back in action, but above mentioned is right this is the wrong forum u need q&a
Sent from my -T989 using XDA Premium 4 mobile app
jconway1968 said:
First, I believe this is the correct section - the phone I am working with is a T-Mobile Galaxy S II... Second, I can't Odin because I don't have a working usb connection. I've tried several different ROMS from this fine section and I get the same result... Boot Loop
Click to expand...
Click to collapse
Just to confirm a few things: where do you not have the working USB connection? in download mode? If so, I'd try reinstalling the drivers.
Also, I see in your sig that you state your phones are:
Asus Nexus 7
Sprint Galaxy Note 2
Neither of which is a SGH-T989. Are you sure you are flashing the correct ROM/Kernel for your device?
also you said it came rooted but you re-rooted it. What process did you use to re-root it?
One last thing: you say you got it second hand, are you sure it is a T-Mobile galaxy S 2? May want to check under the battery for a "T989" or "i9100". The i9100 is NOT a T-Mobile galaxy S 2. It should be SGH-T989 if they didn't give you incorect info about the phone.
You could also try a different USB cable or hub. I've had USB extension cables give me grief and the front ports on my PC don't like my phone.
bmg002 said:
Just to confirm a few things: where do you not have the working USB connection? in download mode? If so, I'd try reinstalling the drivers.
Also, I see in your sig that you state your phones are:
Asus Nexus 7
Sprint Galaxy Note 2
Neither of which is a SGH-T989. Are you sure you are flashing the correct ROM/Kernel for your device?
also you said it came rooted but you re-rooted it. What process did you use to re-root it?
One last thing: you say you got it second hand, are you sure it is a T-Mobile galaxy S 2? May want to check under the battery for a "T989" or "i9100". The i9100 is NOT a T-Mobile galaxy S 2. It should be SGH-T989 if they didn't give you incorect info about the phone.
You could also try a different USB cable or hub. I've had USB extension cables give me grief and the front ports on my PC don't like my phone.
Click to expand...
Click to collapse
Thanks for your help. Here are the answers to your questions:
I think there is something wrong with the micro USB input on the phone. I have reinstalled the drivers several times. I have tried different cables and different computers. I even tried the toothpick trick. No luck.
I do have a GN2. The SG2 is for my daughter...
It is a genuine SGH-T989 I checked under the battery.
soupysoup said:
You could always get a SD card reader, connect t to ur PC, DL a flashable twrp 2.6.1.0 and flash the recovery, then flash a ROM an u should be back in action, but above mentioned is right this is the wrong forum u need q&a
Sent from my -T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Where do I find and how do I put a flashable twrp 2.6.1.0 on my micro sd card? I've always used goomanager in the past but obviously that won't work in this case...
jconway1968 said:
Where do I find and how do I put a flashable twrp 2.6.1.0 on my micro sd card? I've always used goomanager in the past but obviously that won't work in this case...
Click to expand...
Click to collapse
Everything I've found requires a computer connection. I need to be able to flash it back from v2.6.3.1 using TWRP to do it. Is that possible?
soupysoup said:
You could always get a SD card reader, connect t to ur PC, DL a flashable twrp 2.6.1.0 and flash the recovery, then flash a ROM an u should be back in action, but above mentioned is right this is the wrong forum u need q&a
Sent from my -T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
One more piece of information that might be helpful... When I try to wipe the cache I get this message "Formatting Data using make_ext4fs function" and it stays stuck there. I've left it for over 30 minutes and it doesn't ever move from that screen. Hope that helps... I really need some help here.
jconway1968 said:
One more piece of information that might be helpful... When I try to wipe the cache I get this message "Formatting Data using make_ext4fs function" and it stays stuck there. I've left it for over 30 minutes and it doesn't ever move from that screen. Hope that helps... I really need some help here.
Click to expand...
Click to collapse
In twrp settings change it to use rm instead of formatting
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
jconway1968 said:
Everything I've found requires a computer connection. I need to be able to flash it back from v2.6.3.1 using TWRP to do it. Is that possible?
Click to expand...
Click to collapse
If u go to the dev section on this phone and look around a bit, u will find the twrp thread, in that thread is a flashabke copy of 2.6.1.0, if u can't find it pm me, I have a copy, all u would need to do is put the zip file on any micro SD card then put it in the phone and flash it with the twrp u have now, it will revert it back to 2.6.1.0 and that should fix ur prob, but like I said of u can't find it pm me and I'll shoot u a copy
Sent from my -T989 using XDA Premium 4 mobile app
soupysoup said:
If u go to the dev section on this phone and look around a bit, u will find the twrp thread, in that thread is a flashabke copy of 2.6.1.0, if u can't find it pm me, I have a copy, all u would need to do is put the zip file on any micro SD card then put it in the phone and flash it with the twrp u have now, it will revert it back to 2.6.1.0 and that should fix ur prob, but like I said of u can't find it pm me and I'll shoot u a copy
Sent from my -T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ok so I Flashed it and now it's stuck on the Blue Teamwin screen???
jconway1968 said:
Ok so I Flashed it and now it's stuck on the Blue Teamwin screen???
Click to expand...
Click to collapse
Let it sit on the TeamWin screen for a minute or so... I find it sometimes takes a little bit.
If it doesn't ever get past there, try hooking it up to a PC and see if you can get ADB to load (presuming you have ADB installed and ADB drivers installed). If you can, try to do an "adb pull /proc/last_kmsg" and a "adb logcat > logcat.txt" and zip those up and toss them on here.
If you CAN'T get into adb, I would try hooking the phone up to Kies and see if it will do anything for you.
Or you could try following this guide as you have the T-Mobile SGH-T989 (not the Telus SGH-T989D):
http://forum.xda-developers.com/showthread.php?t=1513359
BUT make sure to grab the correct stock image file for whatever version your android currently is (ie if you are on Android 2.3.6, then make sure to get the T-mobile KL1 2.3.6 stock image).
Also, what ROM did you flash? was it a 4.3 ROM? If so, did you update your radio before you flashed the ROM? I think 4.1+ needs the updated radio to function properly.
I know you said you can't connect through ODIN, but I'm hoping it is because of some odd driver or odd ODIN version. That thread has the stuff to make it all work I believe.
I'm really hoping you can get ADB to work. If you can pull a logcat of your bootup process, it will be much easier to figure out what went wrong.
bmg002 said:
Let it sit on the TeamWin screen for a minute or so... I find it sometimes takes a little bit.
If it doesn't ever get past there, try hooking it up to a PC and see if you can get ADB to load (presuming you have ADB installed and ADB drivers installed). If you can, try to do an "adb pull /proc/last_kmsg" and a "adb logcat > logcat.txt" and zip those up and toss them on here.
If you CAN'T get into adb, I would try hooking the phone up to Kies and see if it will do anything for you.
Or you could try following this guide as you have the T-Mobile SGH-T989 (not the Telus SGH-T989D):
http://forum.xda-developers.com/showthread.php?t=1513359
BUT make sure to grab the correct stock image file for whatever version your android currently is (ie if you are on Android 2.3.6, then make sure to get the T-mobile KL1 2.3.6 stock image).
Also, what ROM did you flash? was it a 4.3 ROM? If so, did you update your radio before you flashed the ROM? I think 4.1+ needs the updated radio to function properly.
I know you said you can't connect through ODIN, but I'm hoping it is because of some odd driver or odd ODIN version. That thread has the stuff to make it all work I believe.
I'm really hoping you can get ADB to work. If you can pull a logcat of your bootup process, it will be much easier to figure out what went wrong.
Click to expand...
Click to collapse
You guys are great!!! I really appreciate all the help. No matter what I do, ADB, Kies, different cables, different computers, nothing gets past the "USB Device Not Recognized" pop up. I let it sit for 15 minutes, twice. Still no love... I loaded TWRP_2.6.1.0_Hercules and then reboot and that's when it got stuck. Prior to that I had loaded TMobileT989UVMC6RootedDeodexed Rom. I forget where I got it. I'm pretty sure it was a 4.1.2 based rom.
jconway1968 said:
You guys are great!!! I really appreciate all the help. No matter what I do, ADB, Kies, different cables, different computers, nothing gets past the "USB Device Not Recognized" pop up. I let it sit for 15 minutes, twice. Still no love... I loaded TWRP_2.6.1.0_Hercules and then reboot and that's when it got stuck. Prior to that I had loaded TMobileT989UVMC6RootedDeodexed Rom. I forget where I got it. I'm pretty sure it was a 4.1.2 based rom.
Click to expand...
Click to collapse
weird... I am not sure why it is being so fussy with your phone.
Hopefully somebody has a better suggestion than I do, but my next thought is to try ebay-ing the phone in hopes that somebody gives you a few bucks for it. It sounds to me like the internal memory module is dying and the USB port is shot.
Is your water damage sticker pink/red or missing? It should be under the battery.
I hate thinking that the phone is just dead, but without being able to connect it to the PC in either recovery or download mode and not being able to boot into a ROM or recovery, I think the next step is to scrap it and hope somebody can send you a few bucks... or if you have experience soldering, maybe try replacing the USB connector?
I could be wrong mind you... The only time I had issues like that it was due to a badly flashed recovery and I needed to use ODIN to get back up and running. As a thought, do you have a Windows XP 32-bit computer you could try plugging the phone into? And while the phone is plugged in, can you check device manager for all devices? maybe try installing the drivers manually? I suggest windows XP 32bit because that is what I use the majority of the time with my phone. I've also used Windows 7 64-bit and it worked.
bmg002 said:
weird... I am not sure why it is being so fussy with your phone.
Hopefully somebody has a better suggestion than I do, but my next thought is to try ebay-ing the phone in hopes that somebody gives you a few bucks for it. It sounds to me like the internal memory module is dying and the USB port is shot.
Is your water damage sticker pink/red or missing? It should be under the battery.
I hate thinking that the phone is just dead, but without being able to connect it to the PC in either recovery or download mode and not being able to boot into a ROM or recovery, I think the next step is to scrap it and hope somebody can send you a few bucks... or if you have experience soldering, maybe try replacing the USB connector?
I could be wrong mind you... The only time I had issues like that it was due to a badly flashed recovery and I needed to use ODIN to get back up and running. As a thought, do you have a Windows XP 32-bit computer you could try plugging the phone into? And while the phone is plugged in, can you check device manager for all devices? maybe try installing the drivers manually? I suggest windows XP 32bit because that is what I use the majority of the time with my phone. I've also used Windows 7 64-bit and it worked.
Click to expand...
Click to collapse
Thanks again for your time and suggestions... I've always been very impressed with the xda community. I actually got this phone, used, from Swappa. And I am in the process of returning it for a refund. But the seller is being difficult and is trying to stick me with the phone. I was just trying to salvage it on my own, just in case... Thanks again.
jconway1968 said:
Thanks again for your time and suggestions... I've always been very impressed with the xda community. I actually got this phone, used, from Swappa. And I am in the process of returning it for a refund. But the seller is being difficult and is trying to stick me with the phone. I was just trying to salvage it on my own, just in case... Thanks again.
Click to expand...
Click to collapse
that sucks. I've heard good things about Swappa, but living in Canada I can't use it. My opinion it sounds like you got a dud and based on how hard the guy is fighting to not give you a refund, I wouldn't be surprised if he knew it was doa and just fluked out and get it running before he sold it. Or maybe it got water damaged and he knew it would fail soon so he sold it before it completely quit.
I hope you get it all sorted out.
Good luck and sorry I couldn't be more helpful.
bmg002 said:
that sucks. I've heard good things about Swappa, but living in Canada I can't use it. My opinion it sounds like you got a dud and based on how hard the guy is fighting to not give you a refund, I wouldn't be surprised if he knew it was doa and just fluked out and get it running before he sold it. Or maybe it got water damaged and he knew it would fail soon so he sold it before it completely quit.
I hope you get it all sorted out.
Good luck and sorry I couldn't be more helpful.
Click to expand...
Click to collapse
You were great!!! Thanks again...