Verizon G3
CDC ECM
CDC Serial
LGE Android Phone
I have 3 computers all of which have the same issue of not loading the above drivers.
I have installed the latest lg drivers from their web site.
I made sure to uninstall the old drivers to prevent conflicts.
I tried installing the LG Suite.
I have rebooted between installing drivers.
I have tried everything to get these drivers installed / manually and automatically installing.
All my pc's are win7 64bit.
Getting frustrated.
I am trying to unroot to get the latest OTA.
re
Trying to seperate this post from my accidental one.
Waht exactly are you trying to do? Do you want adb to work or something? Missing drivers isn't a neccesarily thing .
re
sprremix said:
Waht exactly are you trying to do? Do you want adb to work or something? Missing drivers isn't a neccesarily thing .
Click to expand...
Click to collapse
trying to unroot my g3 to take the ota update.
i changed the com port to 41 and powered down the phone, holding up vol i plugged the phone into my pc.
I have the stock firmware and the TOL.
I get to the loader, and am using the flash tool but it just sits there with no progress made for over 10 min.
Related
Hi guys,
I tried to upgrade my rom to BSB WM6.5G I have been running several versions of 6.5 with no issues. This time I am away and am using Windows on a Mac. I tried to use VMware with XP the tfirst time and it sat at 0% and didn't move (XP also tried to add the phone as new hardware during the update, not a good sign). I went into the recovery mode of the customruu that got me back to the bootloader but it still couldn't run the rom update.
Now I am running windows under bootcamp and I can't get the bootloader to recognise the USB. Everytime I connect I get XP trying to find drivers for the Qualcomm chip. Does anyone have any ideas about how to get the bootloader screen to go into USB mode so I can reflash the rom?
Thanks for any help
SOLVED
Kind of embarrasing..... The version of XP I am using to try and recover it didn't have active sync installed. Installed that and all is well. Note to self, dont use VMware to flash ROMs
SOLVED
Problem solved...
@ mods: plse close this Thread
Hi, I installed Cyanogen without a problem however the USB connection did not work as well as some other things so I found the Note 2 stock ROM and went to try flash that.
However the USB connection not working seems to still be a problem as the ROM doesn't flash (failed) and isn't recognized by Kies if I try to do an emergency firmware recovery.
Help guys! I'm stuck at the either "downloading" screen when I turn my phone on to load the ROM or either "there was a firmware error", I cannot load my phone past that, arrrrgh!
looks like it is a driver issue . You can try installing the drivers manually or with a different pc which previously recognized Note 2 ..
Go to downloading mode and let the usb drivers install from online or windows update .. or try connecting a different Note 2 and check if your PC recognizes Note 2
Hi there,
i rooted my G3 using Towelroot and all worked fine.
Today i installed the actual Version Xposed Framework and after rebooting it entered a Bootloop.
So i tried to Hard Reset my G3 but when i confirm it the Android with the Gaers show up for a second and then my G3 keeps showing the LG Logo for a few Minutes till i disassamble the Battery.
Next step i try is to flash a firmware in Download mode, but i cant get the Drivers to work... =(
Someone have some hints for me?
patrickn2282 said:
Hi there,
i rooted my G3 using Towelroot and all worked fine.
Today i installed the actual Version Xposed Framework and after rebooting it entered a Bootloop.
So i tried to Hard Reset my G3 but when i confirm it the Android with the Gaers show up for a second and then my G3 keeps showing the LG Logo for a few Minutes till i disassamble the Battery.
Next step i try is to flash a firmware in Download mode, but i cant get the Drivers to work... =(
Someone have some hints for me?
Click to expand...
Click to collapse
Have you choosen ART modality?
If i would say "what the hell is that" ... would u slap me?
No.. i dont have chosen that..
Bigger problem is that i dont get any usb driver working for firmware update in Download mode.. =(
OK... i managed to get the drivers working.
But further Problem ist now that im not able to flash anything on my device...
Neither the TOT Method, nor updating with the Original LG Support Tool is working...
Support Tool tells me my Model Number and that my Version is most actual.
If i update anyway it stucks at 4% and tell me it cant connect.
TOT Tool tells me that my Version Number is not correct... but it is..
With the KDZ Update Tool it stucks at 4% like the Original method.
Same problem here
Any one can help us?
Solution
Hi there,
the Problem was my PC...
I was on a Windows 8.1 64bit.
Switched to a Win7-PC and all is working fine.
You should try to use the Original LG cable, or another "Original" Cable and connect it to a USB-Port on the Back of your PC (directly to the Mainboard)
On a blank Win 7:
- I installed the LG PC Suite
- Updated the PC Suite
- Connected my LG in Download Mode
- Let the PC install all drivers,
- Disconnected the Phone
- Downloaded the actual LG Mobile Support Tool
- Let the Support tool do the work
After this i got my first OTA Update and its working like a charme
Hello,
so i tried to upgrade my Android using .kbz file. I downloaded flash tool and set eveyrthing like in tutorials. Then my phone started updating but in half way software said :
I deleted LTE LG G3 modem from Windows devices and changed port to COM41.
Now i dont know what to do. I cant update via Flash Tool because there is problem with connection and i cant even start my phone! Argh...
Can you help me please?
maciek1o3s said:
Hello,
so i tried to upgrade my Android using .kbz file. I downloaded flash tool and set eveyrthing like in tutorials. Then my phone started updating but in half way software said :
I deleted LTE LG G3 modem from Windows devices and changed port to COM41.
Now i dont know what to do. I cant update via Flash Tool because there is problem with connection and i cant even start my phone! Argh...
Can you help me please?
Click to expand...
Click to collapse
you removed your phone in a vital area (where it just deleted the old files and before it had installed the new files(partitions) if your phone won"t do anything you need to bring it it if it boots to downloadmode reflash and treat the pc,usb cable & phone like it is a bomb that can go off with the slightest touch
I rooted my V410 with 5.0.2 using Kingroot. After rooting I used SuperSU-Me and it said the binaries needed updating. Since it restarted I have been stuck on the LG boot logo. I can get into download mode but LGflashtool 2014 doesnt recognize the device. Drivers are installed and it is recognized in Windows as an LG Mobile composite USB Device. Thanks for looking at this I hope to get it resolved soon.
robc1042 said:
I rooted my V410 with 5.0.2 using Kingroot. After rooting I used SuperSU-Me and it said the binaries needed updating. Since it restarted I have been stuck on the LG boot logo. I can get into download mode but LGflashtool 2014 doesnt recognize the device. Drivers are installed and it is recognized in Windows as an LG Mobile composite USB Device. Thanks for looking at this I hope to get it resolved soon.
Click to expand...
Click to collapse
Follow the steps in my thread and you'll be able to use custom ROMs. I don't think you can get back to stock 5.x from this point, but at least your device won't be bricked anymore.
http://forum.xda-developers.com/g-pad-10/general/tutorial-lg-gpad-v410-5-1-to-4-4-t3232150