someone please link me to it ?
If you need to ask, I strongly recommend to have your carrier do it. If you are under warranty and they screw it up, even better.
Sent from my SAMSUNG-SGH-I747
lol i m pretty good with rooting/roming stuff my dear..have been doing since 4 yrs back from s1 days...its just that i was outta the s3 scene since one year n when i recently logged on have been hearing abt people bricking their phones trying to upgrade hence thought any senior member would b able to shed some light !
this might help...
http://forum.xda-developers.com/showthread.php?t=2808654
i used it going from mj2 > mjb > NE4.
good luck. make backup. read.
err on the side of kindness
If you are sure you have the i747m and not the i747, you can flash the 4.4.2 ROM from sammobile.com using Odin.
yup its a i747m..but still anyway to confirm it ?
What baseband and bootloader is on your phone?
android 4.1.1 i747m baseband-i747mvldlk4..so whats the safest method now to go to 4.4 ?
Flash back to stock LK4 using firmware from sammobile.com and run OTA updates to 4.4.2.
any other alternatives ? my phones already rooted/custom recovery installed..also i would prefer a custom 4.4.2 touchwiz rom ?
cant i straight away download the stock firmware from sammobile 4.4.2 for i747m & update manually via odin ?
qamartheone said:
cant i straight away download the stock firmware from sammobile 4.4.2 for i747m & update manually via odin ?
Click to expand...
Click to collapse
You can. I suggested starting with 4.1.1 because it's easier to revive the phone if something goes wrong when flashing 4.1.1 in Odin. If something goes wrong when flashing 4.4.2, it could be harder to unbrick.
Related
I tired to root my galaxy s3 but ended up bricking it for a while and all i got was the Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. After trying odin so many time i finally got it to work but now i have another issue...i put verizon 4.1 on my phone using odin instead of att. my att sim wont work and i dont know how i am going to get it back to att stock rom so i can use my phone again!!! if anyone know how to reset this please help i just got the phone and now i cant use it because it has Verizon instead of att galaxy s3 stock rom on it.:crying:
pimpjayjay said:
I tired to root my galaxy s3 but ended up bricking it for a while and all i got was the Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. After trying odin so many time i finally got it to work but now i have another issue...i put verizon 4.1 on my phone using odin instead of att. my att sim wont work and i dont know how i am going to get it back to att stock rom so i can use my phone again!!! if anyone know how to reset this please help i just got the phone and now i cant use it because it has Verizon instead of att galaxy s3 stock rom on it.:crying:
Click to expand...
Click to collapse
Did you ever flash android 4.3 on you're phone? (This is important)
Ali7000 said:
Did you ever flash android 4.3 on you're phone? (This is important)
Click to expand...
Click to collapse
it already had 4.3 i was trying to root it but the process faild and all i get is the error Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again
pimpjayjay said:
it already had 4.3 i was trying to root it but the process faild and all i get is the error Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again
Click to expand...
Click to collapse
Try these http://forum.xda-developers.com/showthread.php?t=2498233, stock at&t rooted without Knox (Believe me man, better without knox). But they are only leaks of the official firmware. I am not a professional developer so you might wanna create a new thread and ask if it's possible in you're situation.
Ali7000 said:
Try these http://forum.xda-developers.com/showthread.php?t=2498233, stock at&t rooted without Knox (Believe me man, better without knox). But they are only leaks of the official firmware. I am not a professional developer so you might wanna create a new thread and ask if it's possible in you're situation.
Click to expand...
Click to collapse
okay i will look it up and see if it works , thanks.
The Canadian and US phones are pretty similar. Maybe a Canadian rom will work?
You can find official firmware here: http://www.sammobile.com/firmwares/1/?model=SGH-I747&pcode=ATT#firmware
audit13 said:
The Canadian and US phones are pretty similar. Maybe a Canadian rom will work?
You can find official firmware here: http://www.sammobile.com/firmwares/1/?model=SGH-I747&pcode=ATT#firmware
Click to expand...
Click to collapse
No it won't work. Since it is a stock rom it most likely will not work, he won't be able to call, text, or use data.
Ali7000 said:
No it won't work. Since it is a stock rom it most likely will not work, he won't be able to call, text, or use data.
Click to expand...
Click to collapse
I wasn't sure if the OP could install some sort of stock firmware to get his phone going and then install the necessary radio.
audit13 said:
I wasn't sure if the OP could install some sort of stock firmware to get his phone going and then install the necessary radio.
Click to expand...
Click to collapse
The best choice for him is to stick to a custom rom until the AT&T 4.3 update releases.
Ali7000 said:
The best choice for him is to stick to a custom rom until the AT&T 4.3 update releases.
Click to expand...
Click to collapse
Wow. it seems as if you got people in here just giving you ODIN TARS to flash. i wouldnt listen/ flash anything than the leaked 4.3 update for att because MOST odin files have bootloader upgrades in them and if you are on 4.3 you will brick trying to restore stock
Andy_nu said:
Wow. it seems as if you got people in here just giving you ODIN TARS to flash. i wouldnt listen/ flash anything than the leaked 4.3 update for att because MOST odin files have bootloader upgrades in them and if you are on 4.3 you will brick trying to restore stock
Click to expand...
Click to collapse
Hah Yah man I've been through a lot sh**.
Sent from my SGH-I747M using XDA Premium 4 mobile app
At&t Tar files
what should i do, the tar file for Verizon still fails but it will go as far as to let my device boot but so i can at least get to recovery mode and then i can reboot it and clear system data but of courses that not what i want because it running Verizon.I is there a way to find the tar file that has at&t on it so i can try to make it work?
Ali7000 said:
Hah Yah man I've been through a lot sh**.
Sent from my SGH-I747M using XDA Premium 4 mobile app
Click to expand...
Click to collapse
what should i do, the tar file for Verizon still fails but it will go as far as to let my device boot but so i can at least get to recovery mode and then i can reboot it and clear system data but of courses that not what i want because it running Verizon.I is there a way to find the tar file that has at&t on it so i can try to make it work?
Based on the OP, the phone is currently running Verizon's 4.1 which leads me to believe the bootloader has not been updated beyond 4.1.2 since recovery mode is accessible; therefore, I think flashing 4.11 or 4.1.2 stock roms would be fine.
As always, it's best to check the installed bootloader before proceeding with any more flashes.
I used the stock firmware from here to downgrade my Bell s3 from stock 4.1.2 to stock 4.1.1.
Stock firmware: http://www.sammobile.com/firmwares/1/?model=SGH-I747&pcode=ATT#firmware
pimpjayjay said:
what should i do, the tar file for Verizon still fails but it will go as far as to let my device boot but so i can at least get to recovery mode and then i can reboot it and clear system data but of courses that not what i want because it running Verizon.I is there a way to find the tar file that has at&t on it so i can try to make it work?
Click to expand...
Click to collapse
Download the ATT Image
Current I747UCDLK3 (JB 4.1.1)
http://forum.xda-developers.com/showthread.php?t=1739426
audit13 said:
Based on the OP, the phone is currently running Verizon's 4.1 which leads me to believe the bootloader has not been updated beyond 4.1.2 since recovery mode is accessible; therefore, I think flashing 4.11 or 4.1.2 stock roms would be fine.
As always, it's best to check the installed bootloader before proceeding with any more flashes.
I used the stock firmware from here to downgrade my Bell s3 from stock 4.1.2 to stock 4.1.1.
Stock firmware: http://www.sammobile.com/firmwares/1/?model=SGH-I747&pcode=ATT#firmware
Click to expand...
Click to collapse
i wouldnt flash the bootloader just to to be safe though. id flash the recovery from the root forum and then install a cm or aosp ROM.
or open the tar and make sure there are not bootloader related files i forgot all of them but one is mbl. something and 1,2,3 theres a post on here how to check i just dont know where
Hello, I am currently rooted and have CWM 6.0.4.3. installed. I'm on CM11 but want to go back to stock.. Is there an easy way to keep root and go back to stock. Want stock for a few functions that ROMS dont seem to be offering but can keep root and CWM ??
Thanks.
Which phone do you have? You could try flashing a pre-rooted stock ROM via Odin. Then use Odin to flash CWM.
Bt its better to firstly install ur stock rom and then again root it as it takes no longer than 5 mins
DeathNotice said:
Bt its better to firstly install ur stock rom and then again root it as it takes no longer than 5 mins
Click to expand...
Click to collapse
Ok perfect, thats what I was looking for. Phone btw is S3 - d2att - SGH i747) Sounds good to install the stock rom and re-root.. I'm sure its here but I have searched everywhere to find a tutorial on this and I cannot find a straight answer.
Would you mind giving me the steps or pointing me to a thread that explains how to and has the files in need to download ?
audit13 said:
Which phone do you have? You could try flashing a pre-rooted stock ROM via Odin. Then use Odin to flash CWM.
Click to expand...
Click to collapse
Do you know if there is a step by step on this somewhere ? I dont mind going back to complete stock.. I can just re-root and flash CWM after.
OR
Maybe you could just answer the bigger question : the reason I want to go back to stock is I need to use MHL/HDMI which CM11 doesnt support. I dont want to go back to stock, I would rather even go to another ROM that supports mhl/hdmi.. but if I have to go to stock, than so be it.?
Were you running the stock AT&T 4.3 ROM before you switched to CM11?
audit13 said:
Were you running the stock AT&T 4.3 ROM before you switched to CM11?
Click to expand...
Click to collapse
Yes, I bought the phone new and was running stock, Canadian Rogers version and had changed to CM10, then to 11.
robberrobbie said:
Yes, I bought the phone new and was running stock, Canadian Rogers version and had changed to CM10, then to 11.
Click to expand...
Click to collapse
Since you installed a custom recovery, that would have tripped the Knox counter which voids the warranty. It's not a problem if the phone is working properly.
Did you update to 4.3 or did it come with 4.3?
You may be better off installing a pre-rooted ROM.
http://forum.xda-developers.com/showthread.php?t=1739426
audit13 said:
Since you installed a custom recovery, that would have tripped the Knox counter which voids the warranty. It's not a problem if the phone is working properly.
Did you update to 4.3 or did it come with 4.3?
You may be better off installing a pre-rooted ROM.
http://forum.xda-developers.com/showthread.php?t=1739426
Click to expand...
Click to collapse
It was quite some time ago but I believe I was on ICS 4.0.. and switch to CM from there. Im not worried about the counter for warranty, that's expired on my unit anyways. I just want to be able to use MHL/HDMI function.. so if fine with flashing pre-rooted.. or stock.. or a different ROM that support MHL/HDMI. Can you recommend the easiest route ?
robberrobbie said:
It was quite some time ago but I believe I was on ICS 4.0.. and switch to CM from there. Im not worried about the counter for warranty, that's expired on my unit anyways. I just want to be able to use MHL/HDMI function.. so if fine with flashing pre-rooted.. or stock.. or a different ROM that support MHL/HDMI. Can you recommend the easiest route ?
Click to expand...
Click to collapse
I asked about 4.3 because the 4.3 bootloader cannot be downloaded. Flashing via mobile Odin will not touch the bootloader or modem.
You could try a pre-rooted rom and then flash a custom recovery via Odin.
I use Philz Touch from here: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2att
audit13 said:
I asked about 4.3 because the 4.3 bootloader cannot be downloaded. Flashing via mobile Odin will not touch the bootloader or modem.
You could try a pre-rooted rom and then flash a custom recovery via Odin.
I use Philz Touch from here: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2att
Click to expand...
Click to collapse
Ok thanks, I will do that. 1 thing I'm not quite sure of is the bootloader situation ? In the first tutorial there is a note : Flashing a prior bootloader can hard/soft brick your device. How do I know ?
I see the steps as:
Extract tar file you downloaded.
Use Odin, put phone into download mode [with phone off, hold vol. down + home + power ], connect to computer and open Odin.
once in odin click the PDA field and select the tar file
Leave Auto Reboot and F. Reset Time checked.
click start and when done let phone reboot.
If you just want a stock, rooted phone with no custom recovery, no plans to flash custom roms, etc. then you can stop HERE.
For my situation, is it just that easy ?
Before flashing, verify the version of your bootloader.
audit13 said:
Before flashing, verify the version of your bootloader.
Click to expand...
Click to collapse
OK I have made an effort to go read and figure out how to find out what version of bootloader on my own.. But i cannot find ? Any chance you know... And could help?
You mentioned your have the i747 and Rogers. Do you have the AT&T s3 (i747) or Rogers/Bell/Telus s3 (i747m)?
What is the most recent stock ROM you had on your phone?
Hey. I got the i747m. As for what was the last stock ROM I had, can't say. I know when I bought the phone it was ICS and I had received and update to jellybean.. But them went to cm10. The tutorial I followed told me had me back everything up, which I did. Have it in a file somewhere on my comp, would that tell me ?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
If you are flasjing back to stock you should flash back to the same baseband/bootloader that came stock on your phone.
I'm looking for a stock rooted zip for the sasktel i747m (MF1) that i can flash in CWM....I need to go back to stock to fix a data issue that ive encountered through flashing these new d2lte builds...
Does anyone know if a cwm flashable stock rooted rom exists for Sasktel's i747m with baseband MF1 ???I already have the Odin flashable stock rooted zip but don't have a laptop handy until tuesday....And im pretty sure i cant flash that zip in cwm recovery....
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Ariesdroid said:
If you are flasjing back to stock you should flash back to the same baseband/bootloader that came stock on your phone.
I'm looking for a stock rooted zip for the sasktel i747m (MF1) that i can flash in CWM....I need to go back to stock to fix a data issue that ive encountered through flashing these new d2lte builds...
Does anyone know if a cwm flashable stock rooted rom exists for Sasktel's i747m with baseband MF1 ???I already have the Odin flashable stock rooted zip but don't have a laptop handy until tuesday....And im pretty sure i cant flash that zip in cwm recovery....
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have not seen a stock mf1 ROM that can be flashed in CWM. You could use mobile Odin to flash back to stock and then flash Philz Touch via desktop Odin later.
OK, so back to my question.. If I have the i747M and bought the phone with ICS.. does this help.?
audit13 said:
You mentioned your have the i747 and Rogers. Do you have the AT&T s3 (i747) or Rogers/Bell/Telus s3 (i747m)?
What is the most recent stock ROM you had on your phone?
Click to expand...
Click to collapse
Hey there Audit, Sorry to bother you again, I just dont know how to move forward from here and neeeeeed some help.
I have been reading for days and days have not found a straight answer for my issue and I dont want to just go ahead and start flashing when I dont know if its the right method ?
I dont know how to get back to stock from where I'm at, I dont know how to figure out what bootloader I have (you asked me)
I have found a couple links on XDA that I can follow, I'm just not sure if they apply to my situation ?
This is a pretty detailed response/tutorial, but I dont know if I can just go ahead with this or not ?
http://forum.xda-developers.com/showthread.php?t=2186967
This is also very detailed: http://forum.xda-developers.com/showthread.php?t=1739426
Any help would be greatly appreciated !
robberrobbie said:
OK, so back to my question.. If I have the i747M and bought the phone with ICS.. does this help.?
Click to expand...
Click to collapse
If you are sure you have the Rogers i747m and you have never loaded a stock Rogers 4.3 ROM onto your phone, you could use desktop Odin to flash a pre-rooted 4.1.2 ROM from here: http://forum.xda-developers.com/showthread.php?t=1739426.
Flashing the pre-rooted 4.1.2 ROM will return the phone to completely stock, wipe out all installed apps and data, and you will have root. I do not recommend flashing the Rogers 4.3 pre-rooted ROM from the link.
Once you are able to boot into the phone and set things up, you can flash Philz Touch from Odin which will give you a custom recovery on a rooted stock 4.1.2 ROM.
Hey guys,
I got a I747 I want to give to my mother as a gift.
I downgraded 4.1.2 to 4.1.1 and ran the secret menu unlock to unlock the sim card, that worked perfectly.
Now I want to update this out of 4.1.1 to 4.4.2 but I cannot find a stock firmware to run on odin anywhere.
Do I need to go to 4.3 first? Is there a stock firmware for that?
SamMobile stops at 4.1.2... OTA obviously doesn't work.
How Can I get this done..
Iz3man said:
Hey guys,
I got a I747 I want to give to my mother as a gift.
I downgraded 4.1.2 to 4.1.1 and ran the secret menu unlock to unlock the sim card, that worked perfectly.
Now I want to update this out of 4.1.1 to 4.4.2 but I cannot find a stock firmware to run on odin anywhere.
SamMobile stops at 4.1.2... OTA obviously doesn't work.
How Can I get this done..
Click to expand...
Click to collapse
You can just flash stock 4.1.2 firmware from sammobile and then run OTA updates.
I also found this on sammobile: Canada (Bell Mobile) (Black Edition), Version: Android 4.4.2, PDA: I747MVLUFNE6
CSC: I747MOYCFNE6, MODEM: I747MVLUFNE6
audit13 said:
You can just flash stock 4.1.2 firmware from sammobile and then run OTA updates.
I also found this on sammobile: Canada (Bell Mobile) (Black Edition), Version: Android 4.4.2, PDA: I747MVLUFNE6
CSC: I747MOYCFNE6, MODEM: I747MVLUFNE6
Click to expand...
Click to collapse
Will it work though.
I have it already on my pc, I updated my wife's with it.
If I update to 4.1.2 will OTA come? Even with the I747(not the I747m) on the Bell network?
Iz3man said:
Will it work though.
I have it already on my pc, I updated my wife's with it.
If I update to 4.1.2 will OTA come? Even with the I747(not the I747m) on the Bell network?
Click to expand...
Click to collapse
I have a Motorola Atrix from Bell. I flashed it with stock ATT firmware and received OTA updates from ATT over wi-fi.
Since you have the i747, start with stock pre-rooted ATT 4.1.1. This will flash the stock recovery, radio, and bootloader. Run triangle away, flash a stock unrooted ATT stock 4.1.1 ROM, and take the OTA updates.
http://forum.xda-developers.com/sho...mctr=(not provided)&__utmv=-&__utmk=135374642
audit13 said:
I have a Motorola Atrix from Bell. I flashed it with stock ATT firmware and received OTA updates from ATT over wi-fi.
Since you have the i747, start with stock pre-rooted ATT 4.1.1. This will flash the stock recovery, radio, and bootloader. Run triangle away, flash a stock unrooted ATT stock 4.1.1 ROM, and take the OTA updates.
http://forum.xda-developers.com/sho...mctr=(not provided)&__utmv=-&__utmk=135374642
Click to expand...
Click to collapse
Ok, so I guess it wasn't clear, my bad.
I have 4.1.1 stock firmware on my att 1747. It has never been rooted.
I run the Ota and I got an error, now it tells me "Your software is up to date".
Can I flash a bell i747m 4.4.2 image onto this i747 or will it brick?
Iz3man said:
Ok, so I guess it wasn't clear, my bad.
I have 4.1.1 stock firmware on my att 1747. It has never been rooted.
I run the Ota and I got an error, now it tells me "Your software is up to date".
Can I flash a bell i747m 4.4.2 image onto this i747 or will it brick?
Click to expand...
Click to collapse
You can flash i747m firmware on your phone but DO NOT flash the radios or bootloader from an i747m to an i747 and vice versa. Bricking is a really possibility if you do that.
Do you have a custom recovery? If you do, you will need to install a stock recovery.
Try resetting the phone (wiping cache, data) in recovery or through the ROM itself.
audit13 said:
You can flash i747m firmware on your phone but DO NOT flash the radios or bootloader from an i747m to an i747 and vice versa. Bricking is a really possibility if you do that.
Do you have a custom recovery? If you do, you will need to install a stock recovery.
Try resetting the phone (wiping cache, data) in recovery or through the ROM itself.
Click to expand...
Click to collapse
Alright, I have the stock recovery. How do I not flash the radio and boatloads when using the firmware from sammobile?
You cant. You cannot flash another devices firmware. Odin wont let it happen and if it did youd end up hard bricked due to mixed firmware. For example your sbl1, modemst and param partitions (plus others) would be i747 and youd be flashing sbl2, sbl3, rpm, etc from an I747M.
The only thing you could use are the system partition and kernel, nothing else. There are two ways to accomplish this, one is to build a rom from the firmware and flash that. The other is to flash with mobile odin, but that requires root and youd still have to be very careful.
Another priblem I see you encountering is you cannot run 4.4.2 without 4.3 or newer firmware. It will not boot otherwise.
You need to go to the General section and follow one of enewman17's tutorials to get to either 4.3 or 4.4.2. Personally, I dont see any other way you will be able to accomplish it.
audit13 said:
You can flash i747m firmware on your phone but DO NOT flash the radios or bootloader from an i747m to an i747 and vice versa. Bricking is a really possibility if you do that.
Do you have a custom recovery? If you do, you will need to install a stock recovery.
Try resetting the phone (wiping cache, data) in recovery or through the ROM itself.
Click to expand...
Click to collapse
Alright, based on Doc holiday, and others they say It cannot be done and from my experience I beleive them.
Thank you,
It's very difficult to do this when others are giving bad advice.
So for the record, cannot flash i747m firmware to i747.
Thanks!
The annoying part here is I can do it with my m7, I just flashed the Dev edition onto my Bell m7 with no problems.
All devices are different in many ways. What is perfectly safe to do with one brand or model can brick another.
And I wouldnt call it "bad" advice... I've seen audit13 and others helping lots of folks with very good advice. We all make mistakes and we all have more we can learn about these devices. No one knows everything about this stuff and shouldnt let that prevent them from trying to help.
Those who are trying to help are doing so with the best of intentions and tell people what they think could be the best way to solve a given problem. In cases like this one, its easy to see how anyone would think its ok to flash different firmware between similar models based on being able to do so on other devices they are familiar with. (If I had gone into those forums I wouldve been telling people the opposite and ended up being wrong there.)
All I can say is chalk it up as a new lesson on a different device, and I hope you still appreciate that someone was trying to help.
@audit13 I hope none of this discourages you from helping. Ive seen plenty of threads where your advice was sound and appreciated, and I am glad you have been around to help so many people out!
Now, back on the problem at hand... if you want to be running the latest 4.4.2 kk, you will have the option to use the OS (/system and kernel) from either the I747 or I747M firmware. But first you must fully update to a minimum of the 4.3 MJB firmware for the I747. Once you have this running for your base firmware/bootloader, you can then run the Bell or AT&T (4.3 or 4.4.2) system. (I hope this is making sense!)
So first, update the full 4.3, MJB, firmware via Odin. (Theres a thread in General with the file, ill post the link in a min).
If you want to update to 4.4.2 firmware, you can then follow enewman17's tutorial to do so via OTA.
You can then either stay with that, or use Mobile Odin to flash ONLY the system and kernel from the Bell firmware.
Let me know if any of that needs better clarification! Also let us know what your ultimate goal is. From the options you have, where do you want to end up?
---------- Post added at 10:32 AM ---------- Previous post was at 10:26 AM ----------
Ok, here are some links.
Stock MJB firmware (flash in Odin)
http://forum.xda-developers.com/showthread.php?t=2722660
enewman17's thread for updating to 4.4.2 (high success rate)
http://forum.xda-developers.com/showthread.php?t=2789917
Official, unmodified 4.4.2 OTA
http://forum.xda-developers.com/showthread.php?t=2788012
After updating with the 4.3 firmware, you can first try using the official ota to update. Then, if that fails you can go to enewman17's thread and try his method.
DocHoliday77 said:
All devices are different in many ways. What is perfectly safe to do with one brand or model can brick another.
And I wouldnt call it "bad" advice... I've seen audit13 and others helping lots of folks with very good advice. We all make mistakes and we all have more we can learn about these devices. No one knows everything about this stuff and shouldnt let that prevent them from trying to help.
Those who are trying to help are doing so with the best of intentions and tell people what they think could be the best way to solve a given problem. In cases like this one, its easy to see how anyone would think its ok to flash different firmware between similar models based on being able to do so on other devices they are familiar with. (If I had gone into those forums I wouldve been telling people the opposite and ended up being wrong there.)
All I can say is chalk it up as a new lesson on a different device, and I hope you still appreciate that someone was trying to help.
@audit13 I hope none of this discourages you from helping. Ive seen plenty of threads where your advice was sound and appreciated, and I am glad you have been around to help so many people out! ]
:thumbup::beer::sly:
err on the side of kindness
Click to expand...
Click to collapse
I'm currently on MJB and I'm looking to update my bootloader/modem combo to the NE4, but before doing so I'd like to have on hand a stock NE4 Rom to fall back on if needed (since I can't use the stock MJB one that I have at that point).
I've been looking around but can't seem to find a Stock NE4 file. Can anyone point me in the right direction? Thank you.
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
There is no stock NE4 firmware because AT&T never released it and was only available via OTA updates.
This may help: http://forum.xda-developers.com/galaxy-s3-att/general/ucuemjb-to-ucufne4-firmware-update-t2808654
audit13 said:
There is no stock NE4 firmware because AT&T never released it and was only available via OTA updates.
This may help: http://forum.xda-developers.com/galaxy-s3-att/general/ucuemjb-to-ucufne4-firmware-update-t2808654
Click to expand...
Click to collapse
Is there a stock NJ1?
I guess what I'm trying to get at is how far can I go updating and still have a safe way of recovering to stock if anything were to go wrong?
(I used to flash LK3 stock when I'd run into problems and just go from there, but I understand with these you cannot downgrade or it'll brick)
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
well there's this. NE4 4.4.2 , but not sure if thats what youre looking for.(?).
http://forum.xda-developers.com/showthread.php?t=2788357
"all i can really do , is stay out of my own way and let the will of heaven be done"
There is no stock AT&T ROM beyond LK3. Once you are on mjb, you can only flash stock ROMs that have been specifically compiled for flashing via Odin or TWRP/CWM.
If you want to revert back to stock from a custom ROM, look for stock flashable ROM on the general section of the i747 forum.
I'm using SlimKat 4.4.4, yet my phone's baseband version is 4.1.1 (I747UCDLK3). I'm looking to upgrade my baseband version to 4.4.2 due to some issues.
Can I upgrade straight from 4.1.1 to 4.4.2?
Or do I need to upgrade to 4.1.2 -> 4.3 -> 4.4.2? If this is the case, I have one concern. There are many footnotes saying if you downgrade from 4.4.2 to a lower version, you will brick your phone. These footnotes don't specifically say whether they're talking about OS version or baseband version. Is it safe for me to upgrade to 4.1.2 -> 4.3 -> 4.4.2 with a 4.4.2 ROM? Is it safe for me to flash a 4.1.1 stock ROM?
Any help appreciated. Thanks!
scripte said:
I'm using SlimKat 4.4.4, yet my phone's baseband version is 4.1.1 (I747UCDLK3). I'm looking to upgrade my baseband version to 4.4.2 due to some issues.
Can I upgrade straight from 4.1.1 to 4.4.2?
Or do I need to upgrade to 4.1.2 -> 4.3 -> 4.4.2? If this is the case, I have one concern. There are many footnotes saying if you downgrade from 4.4.2 to a lower version, you will brick your phone. These footnotes don't specifically say whether they're talking about OS version or baseband version. Is it safe for me to upgrade to 4.1.2 -> 4.3 -> 4.4.2 with a 4.4.2 ROM? Is it safe for me to flash a 4.1.1 stock ROM?
Any help appreciated. Thanks!
Click to expand...
Click to collapse
first if wanted , i would get the free unlock sim code (am pretty sure is available on 4.1.1).
all i have ever read says to do the incremental updates (safest).; which i believe you can do OTA ; or flash thru recovery.
yes , you will most surely brick your phone if you try to downgrade bootloader from 4.4.2.
AND you want to keep bootloader and baseband at the same version. upgrade one then upgrade the other.
if your already on 4.1.1 , then yes flash away the stock 4.1.1 rom ; if youre talking about after you upgrade to 4.4.2 then the 4.1.1 may not flash unless you edit the updater script (think thats what its called , been awhile).
good luck !
"all i can really do , is stay out of my own way and let the will of heaven be done"
scripte said:
I'm using SlimKat 4.4.4, yet my phone's baseband version is 4.1.1 (I747UCDLK3). I'm looking to upgrade my baseband version to 4.4.2 due to some issues.
Can I upgrade straight from 4.1.1 to 4.4.2?
Or do I need to upgrade to 4.1.2 -> 4.3 -> 4.4.2? If this is the case, I have one concern. There are many footnotes saying if you downgrade from 4.4.2 to a lower version, you will brick your phone. These footnotes don't specifically say whether they're talking about OS version or baseband version. Is it safe for me to upgrade to 4.1.2 -> 4.3 -> 4.4.2 with a 4.4.2 ROM? Is it safe for me to flash a 4.1.1 stock ROM?
Any help appreciated. Thanks!
Click to expand...
Click to collapse
This is an I747, right? I think the I747M had LK3 firmware too. If you happen to be on an I747M don't flash any of the I747 specific stuff below, or you'll probably brick your phone.
Since you're still on the old firmware it might be a good idea to carrier unlock your phone if you haven't already done it. You'll lose that ability if you update.
To update to 4.4.2 firmware you can go two ways. You can Odin back to unrooted stock and you should start receiving OTA updates. They will be incremental and they'll come about 24 hours apart, or you can set your system time ahead a day to cheat that. Eventually you'll get up to the 4.4.2 firmware. NE4 is 4.4.2, but NJ1 is the most recent. This is probably the safest way, but it will be somewhat slower. Those OTA's are full firmware packages so they're big downloads.
Or you can flash bootloader/modem only upgrades in custom recovery. Enewman17 has posted everything you need to get an I747 up to date to XDA. I flashed all these while running the Slimkat stable 9 ROM to get my I747 from LK3 up to NJ1. This has to be done incrementally and you have to boot successfully into your ROM in between each firmware flash. You can't jump from the 4.1.1 bootloader to the 4.4.2 bootloader. First flash the MJB firmware update linked to this thread then reboot into your ROM. Next flash the NE4 firmware zip also linked to that thread and then reboot into your ROM. You're on 4.4.2 firmware at this point, but if you want to be on the newest bootloader and modem then flash the NJ1 zip attached to this thread. If you go this route be sure you read enewman's posts very carefully and understand exactly what you're doing because fiddling with the bootloader and modem is the #1 way to hard brick this phone.
For the most part you can flash any ROM you want no matter what firmware you're on as long as it is intended for I747. You might find that your wifi won't work or your modem doesn't work or maybe it just bootloops if you get on a ROM that wasn't intended for the bootloader/modem currently on your phone, but you can still boot up into recovery and restore a backup or flash another ROM and get out of that. What you have to be very, very careful with is the bootloaders since Knox was introduced, that's MJB, NE4, and NJ1. Those bootloaders cannot ever be downgraded; don't try it. You'll hard brick and it is pretty hard to recover from. Its also for the best to keep your bootloader and modem matched on this newer firmware; the OTA method or the zips linked to the threads above will do that. Custom ROMs that are AOSP/CM based won't ever mess with your bootloader and modem. They're just a system image and a kernel. What you have to be really careful with is Odin, those are usually full firmware packages. AT&T hasn't allowed a stock image beyond 4.1.1 to be released for the I747, so once you're on the newer bootloaders there is no more option to Odin back to stock.
Good luck.