Hey guys,
Running ILWT CM7. Flashed about two weeks ago. My phone has been working fine except for the past few days where it's been constantly freezing, requiring a battery-out and turn on, and rebooting on it's own.
Last time it froze, I removed the battery and turned back on, and it got to the "htc" logo and froze. After ~25minutes, I took the battery out and tried again.
Phone seems completely dead, won't respond to power on, volume down and power on, no lights come on when charger cable is plugged in. When USB cable is plugged in and no buttons or anything on the phone is pressed, my laptop attempts to install drivers.
Tried leaving battery out for 30minutes and trying again, but no luck.
Any suggestions?
Cheers!
Stuck in RUU mode?
Kaph said:
Hey guys,
...
Last time it froze, I removed the battery and turned back on, and it got to the "htc" logo and froze. ...
Phone seems completely dead ... When USB cable is plugged in and no buttons or anything on the phone is pressed, my laptop attempts to install drivers.
... Any suggestions?
Cheers!
Click to expand...
Click to collapse
Looks like your phone is stuck in RUU mode.
In RUU mode you see the silver "HTC" logo as long as your phone is connected to your computer with an USB data cable. No charging lights will show in this mode.
You can use the following command to boot your phone to Android:
Code:
fastboot oem boot
When that does not work, because your partition table or system partition might be corrupted, then you would have to use the correct RUU (Rom Update Utility) for your phone to get it back to a working state.
When you have a bricked internal memory chip (emmc) than nothing will work properly to restore your phone to normal working conditions.
In the case you have an engineering HBOOT you could boot a ROM from SD card, but that is a far shot.
Best regards,
Catherall
catherall said:
Looks like your phone is stuck in RUU mode.
In RUU mode you see the silver "HTC" logo as long as your phone is connected to your computer with an USB data cable. No charging lights will show in this mode.
You can use the following command to boot your phone to Android:
Code:
fastboot oem boot
When that does not work, because your partition table or system partition might be corrupted, then you would have to use the correct RUU (Rom Update Utility) for your phone to get it back to a working state.
When you have a bricked internal memory chip (emmc) than nothing will work properly to restore your phone to normal working conditions.
In the case you have an engineering HBOOT you could boot a ROM from SD card, but that is a far shot.
Best regards,
Catherall
Click to expand...
Click to collapse
Thanks for the help
When plugged in with the USB cable -> computer, I still get no response from the phone itself. Screen doesn't turn on, still seems dead. My laptop still says "Installing device driver software" to no avail, and phone is still dead. No lights, screen is off, nada. As though it was powered-off.
ADB Devices lists nothing, and fastboot oem boot hangs on <waiting for device>.
Am I out of luck? I could send the phone off for repair, but as I'm rooted I think warranty is void.
Remarks
Kaph said:
Thanks for the help
My laptop still says "Installing device driver software" to no avail, and phone is still dead
ADB Devices lists nothing, and fastboot oem boot hangs on <waiting for device>.
Am I out of luck? I could send the phone off for repair, but as I'm rooted I think warranty is void.
Click to expand...
Click to collapse
Windows seems to need a driver installation for using fastboot. Did you try to automaticall install device driver software? Have you installed HTC sync on your Windows computer?
When your device does not respond at all, and even refuses to connect in fastboot, then nobody can tell that you have been rooted.
Best regards,
Catherall
Sounds like your EMMC is fried, as of now I don't think there's a solution other than sending it back. Many say HTC accept and fix it even though it is s-off
Sent from my HTC Vision using XDA
did you get this worked out? i had a similar problem, ended up booting into fastboot by holding the trackpad and the power button, then just selected reboot and my phone powered on like nothing had happened, i was running the same rom.
Hey, did you alreasy tourned your phone to the fastboot mode?
Or does your device still have a black screen during boot?
I rooted this phone and when I was done trying S-OFF, phone would not respond to anything. It would only blink the orange notification light when I pressed Power and Vol+, or it would stay steady green with both Vol keys and Power. But the phone screen would never turn on. So after trying for hours to figure it out. I finally took the battery off, plugged the phone held pressed the power button and then put the battery in place the phone finally turned on and it worked. I turned the phone off again and it was doing the same issue. So I did the same step but this time with power and vol- to get in the bootloader and changed the hboot version to Desire Z. After that phone works perfectly, turns on and off with out any issues.
I did have to try the trick a couple of times idk why but it would work once in a while not everytime i tried it. Hope this helps anyone who also ends up with a similar issue.
I was trying to push new rom with odin3, while it was loading the the process hanged.
I removed the cable and then restarted the mobile connected it again with the computer and opend odin3 again.
Suddenly I got a strange boot error As i am new in this forum I have no authority to put pictures so I will try to describe what appears on the screen.
a picture of a mobile phone connected with yellow exclamation mark connected to a computer
I tried all the possible option I have been searching for more than 17 Hour with no hope.
I also tried omapflash but when I connect the mobile to computer without battery it keep connect and then disconnect infinite loop.
I cant access boot loader or download mode or any thing the phone is almost dead.
My phone Model is GT-I9250
erabah said:
I was trying to push new rom with odin3, while it was loading the the process hanged.
I removed the cable and then restarted the mobile connected it again with the computer and opend odin3 again.
Suddenly I got a strange boot error As i am new in this forum I have no authority to put pictures so I will try to describe what appears on the screen.
a picture of a mobile phone connected with yellow exclamation mark connected to a computer
I tried all the possible option I have been searching for more than 17 Hour with no hope.
I also tried omapflash but when I connect the mobile to computer without battery it keep connect and then disconnect infinite loop.
I cant access boot loader or download mode or any thing the phone is almost dead.
My phone Model is GT-I9250
Click to expand...
Click to collapse
Same problem, any advice?
Finally find the soloution.
Zenicorpse said:
Same problem, any advice?
Click to expand...
Click to collapse
After a long journey and after trying every single possible solution I finally find it wrapped up in the below link
http://forum.xda-developers.com/galaxy-nexus/general/guide-restore-to-stock-unbrick-galaxy-t2065470
Read the post carefully and make sure that you have Galaxy Nexus GSM I9250. So don’t try it on other devices.
Hello!
I have one LG G3 D815 16GB wich is stuck on fastboot mode, all I can do on it is to enter the Hard Reset menu, but even if I choose Yes from that menu, nothing happens.
When I try to put it in Download Mode it does nothing, but after few moments after the phone is connected to PC on screen appears "[211630] Fastboot mode started".
Can anyone help me? The phone has get bricked from nothing, I didn't do anything to him to get it bricked.
If I try to power it on normally it remains stucked with LG logo on the screen.
Can anybody help me? With a tutorial or something?
Thx!
PS: I didn't installed any custom firmware or something like this on this phone. I attached down there a photo with the screen wich appears after I connect it to PC.
The same problem as me: http://forum.xda-developers.com/lg-g3/help/lg-g3-hard-break-t2977485
No one can help me?
Do you have warranty?
I believe jtag is only option here as you cant enter anywhere.
Happened to me today, this one worked! http://forum.xda-developers.com/showpost.php?p=57655028&postcount=15
I was installing the latest update on my 7T and it got stuck on the reboot animation. I waited about half an hour and it was still stuck on the animation screen so I held Power+Volume Up to force reboot, nothing happened. Got into recovery mode and deleted system settings and cache still the same. Drained it and powered it up again still nothing works. And my laptop doesnt recognize it if I plug it into the USB port. I can access both fastboot and recovery mode. I need to extract some very important data. Please please help.
Try reflashing the ROM manually. There should be a guide somewhere in the 7/7T forum.
I've got a dead oneplus 5t from my son. It was not charging anymore.. So I've replaced charging cable and battery.. Seemed to work it was charging... However it doesn't boot... No logo screen screen stays black/blank.
Tried several suggestions on this forum to get into recovery mode, fastboot mode... But still nothing. Only vibrating works after a few seconds.
So tried to unbrick with OP5T_Unbrick_tool_dumpling_43_J.40_181105(OOS.5.1.7) and the qualcomdrivers..
I was able to install the drivers and I see they are installed in devicemanagement.. and an empty folder create for oneplus.
I charged the phone all night and was able to download the upgrade. It then says download complete and I tried to restart the phone..
Still just vibrating but nothing happens.. Seems like everything has vanished from the phone, no recovery, no bootloader, no files.
So how to proceed to get all the stuff on the phone? And maybe the displayscreen is dead, but how can I tell?
Also tried the SMT upgrade. Strange thing is the device and com port are seen in devicemanagement and active when I connect without volume up, but cannot start because it says When I try to use smt mode the program says: "This COM port is disable by user". With volume button up pressed and then connect, ledlight turns green but the qualcomdevice is grayed out in devicemanagement and it says waiting for device..
Any help is welcome. I am a noob in how to proceed on the phone however I have an IT background.
Spent already so many time figuring out .. maybe it's effortless and its for the trashbin.
Thanks in advance
SOLVED
I opened the phone again loosened all those tiny connections to battery, screen,charger, mainboard and re-attached them.. Somehow a connection seemed to be fitting allright as yI looked at it, but apparently wasn't :good: