[Q] huawei p6 stuck on ascend logo - Huawei Ascend P6, Mate

Hi, i have searched the forum before posting this.
my phone is stuck at the logo and i have tried pressing all possible key bindings (power + up, power + down, power + up + down) but still i can only see the log. I also tried to use adb fastboot but when i search for my device (adb devices) it says my phone is offline. And right now i can't even turn off my phone, so the battry is draining right now.
please help me as fast as possible as i dont think i can charge my phone

have you pressed the three buttons longer than 10seconds?
if not,try it..hold them until the screen changes (might take up to a full minute!!!!)..be patient..
to reach the bootloader (where adb can find your phone),hold power and vol. down until the huawei logo apears and stays (looks like it seems to be stuck)..then connect to the pc and wait for a few seconds..in adb cmd type "fastboot devices" (without "")..you should see many "?" and weird things in a line - thats ok! - your phone is recognized then..
from there you can start the adb cmds you want to (and can be found en masse here in this forum)..
hope this helps

blueIBI said:
have you pressed the three buttons longer than 10seconds?
if not,try it..hold them until the screen changes (might take up to a full minute!!!!)..be patient..
to reach the bootloader (where adb can find your phone),hold power and vol. down until the huawei logo apears and stays (looks like it seems to be stuck)..then connect to the pc and wait for a few seconds..in adb cmd type "fastboot devices" (without "")..you should see many "?" and weird things in a line - thats ok! - your phone is recognized then..
from there you can start the adb cmds you want to (and can be found en masse here in this forum)..
hope this helps
Click to expand...
Click to collapse
Thanx for they reply, i tried pressing the 3 buttons for 2 min but nothing,
i also tried fastboot devices and i found the ???????
Now what do i need to do to fix my phone?

Never mind, solved big thanx for your help

bobalyafeai09 said:
Hi, i have searched the forum before posting this.
my phone is stuck at the logo and i have tried pressing all possible key bindings (power + up, power + down, power + up + down) but still i can only see the log. I also tried to use adb fastboot but when i search for my device (adb devices) it says my phone is offline. And right now i can't even turn off my phone, so the battry is draining right now.
please help me as fast as possible as i dont think i can charge my phone
Click to expand...
Click to collapse
Bro. i have the same problem with you. and sadly my phone too cant recognize the adb. i mean the adb cant detect my phone. so if your phone fix please tell me. hope that your phone can fix so that i will do the same thing. :good:

Help999 said:
Bro. i have the same problem with you. and sadly my phone too cant recognize the adb. i mean the adb cant detect my phone. so if your phone fix please tell me. hope that your phone can fix so that i will do the same thing. :good:
Click to expand...
Click to collapse
My phone is fixed now, first i was using windows 8 to solve my problem but there was something wrong with driver for the phone, so i tried using my friend PC windows 7 and the driver installed automatically.
Now you need to connect your phone to the PC and hold power + volume down together until the phone restarts and the Acsend logo appears, now you can relase the buttons.
After that you need to type "fastboot devices" in the command promote, you should see a message like this "????/??,,? <>??????".
if you get the message let me know, i will tell you what you need to do next

bobalyafeai09 said:
My phone is fixed now, first i was using windows 8 to solve my problem but there was something wrong with driver for the phone, so i tried using my friend PC windows 7 and the driver installed automatically.
Now you need to connect your phone to the PC and hold power + volume down together until the phone restarts and the Acsend logo appears, now you can relase the buttons.
After that you need to type "fastboot devices" in the command promote, you should see a message like this "????/??,,? <>??????".
if you get the message let me know, i will tell you what you need to do next
Click to expand...
Click to collapse
Bro. Please give the link of all tools that you use like adb like that . and the complete process i will follow your instructions. Advance Thanks Bro. :good::highfive:

Help999 said:
Bro. Please give the link of all tools that you use like adb like that . and the complete process i will follow your instructions. Advance Thanks Bro. :good::highfive:
Click to expand...
Click to collapse
For the adb, i installed it long time ago and i dont remember from which website but you can search in this forum and find plenty of useful posts.
After I checked my device using this command 'fastboot devices', i downloaded boot.img and recovery.img for "Stock Firmware Huawei B506 CN KitKat" from this link: http://forum.xda-developers.com/showpost.php?p=51718316&postcount=2
and followed the steps.
after that i installed twrp by following the steps from this link: http://techbeasts.com/2014/04/29/in...3-7-or-twrp-2-7-recovery-on-huawei-ascend-p6/
then i used this link: http://forum.xda-developers.com/showthread.php?t=2739825
to install AOSP 4.4.4. but i think you can download other roms and follow the same steps

for custom roms yes..there you need twrp..
if you want to stay on stock roms you have always to reflash the respective recovery from the firmware (stock rom) you actually have running..

bobalyafeai09 said:
For the adb, i installed it long time ago and i dont remember from which website but you can search in this forum and find plenty of useful posts.
After I checked my device using this command 'fastboot devices', i downloaded boot.img and recovery.img for "Stock Firmware Huawei B506 CN KitKat" from this link: http://forum.xda-developers.com/showpost.php?p=51718316&postcount=2
and followed the steps.
after that i installed twrp by following the steps from this link: http://techbeasts.com/2014/04/29/in...3-7-or-twrp-2-7-recovery-on-huawei-ascend-p6/
then i used this link: http://forum.xda-developers.com/showthread.php?t=2739825
to install AOSP 4.4.4. but i think you can download other roms and follow the same steps
Click to expand...
Click to collapse
Thank you for this bro. i will follow this steps when my phone fix too. well thank you very much! :good: :highfive:
---------- Post added at 06:44 AM ---------- Previous post was at 06:31 AM ----------
bobalyafeai09 said:
For the adb, i installed it long time ago and i dont remember from which website but you can search in this forum and find plenty of useful posts.
After I checked my device using this command 'fastboot devices', i downloaded boot.img and recovery.img for "Stock Firmware Huawei B506 CN KitKat" from this link: http://forum.xda-developers.com/showpost.php?p=51718316&postcount=2
and followed the steps.
after that i installed twrp by following the steps from this link: http://techbeasts.com/2014/04/29/in...3-7-or-twrp-2-7-recovery-on-huawei-ascend-p6/
then i used this link: http://forum.xda-developers.com/showthread.php?t=2739825
to install AOSP 4.4.4. but i think you can download other roms and follow the same steps
Click to expand...
Click to collapse
Bro , AOSP 4.4.4 Rom is better? i will use the same rom bro Thanks again.
---------- Post added at 07:11 AM ---------- Previous post was at 06:44 AM ----------
HEY GUYS! MY COMPUTER RECOGNIZE MY PHONE , BUT .
WHEN I TRY TO FLASH A BOOT.IMG I GET THIS ERROR .
C:\Users\ASUS\Desktop\adb>fastboot flash boot boot.img
target reported max download size of 838860800 bytes
sending 'boot' <8192 KB>...
OkAY [ 0.281s ]
writing 'boot'...
FAILED <remote: flash failure, ErrNo:2>
finished. total time: 0.286s
THAT ERROR I GET WHEN I FLASH BOOT.IMG. (SORRY I DONT KNOW HOW TO PUT A IMAGE SO THATS WHY I TYPE THE ERROR)

Help999 said:
Thank you for this bro. i will follow this steps when my phone fix too. well thank you very much! :good: :highfive:
---------- Post added at 06:44 AM ---------- Previous post was at 06:31 AM ----------
Bro , AOSP 4.4.4 Rom is better? i will use the same rom bro Thanks again.
---------- Post added at 07:11 AM ---------- Previous post was at 06:44 AM ----------
HEY GUYS! MY COMPUTER RECOGNIZE MY PHONE , BUT .
WHEN I TRY TO FLASH A BOOT.IMG I GET THIS ERROR .
C:\Users\ASUS\Desktop\adb>fastboot flash boot boot.img
target reported max download size of 838860800 bytes
sending 'boot' <8192 KB>...
OkAY [ 0.281s ]
writing 'boot'...
FAILED <remote: flash failure, ErrNo:2>
finished. total time: 0.286s
THAT ERROR I GET WHEN I FLASH BOOT.IMG. (SORRY I DONT KNOW HOW TO PUT A IMAGE SO THATS WHY I TYPE THE ERROR)
Click to expand...
Click to collapse
Is this boot.img for the twrp or the stock pu-506?

bobalyafeai09 said:
Is this boot.img for the twrp or the stock pu-506?
Click to expand...
Click to collapse
i just downloaded the boot.img here http://forum.xda-developers.com/show...16&postcount=2
and follow the instutions. my phone stuck on logo and i want to fix it. but the first step flashing a boot.img
i got a failed message. how do i fix it? please help. :crying:

Help999 said:
i just downloaded the boot.img here http://forum.xda-developers.com/show...16&postcount=2
and follow the instutions. my phone stuck on logo and i want to fix it. but the first step flashing a boot.img
i got a failed message. how do i fix it? please help. :crying:
Click to expand...
Click to collapse
i cant open the link, what is the boot.img for?

bobalyafeai09 said:
Is this boot.img for the twrp or the stock pu-506?
Click to expand...
Click to collapse
i download the boot.img from "Stock Firmware Huawei B506 CN KitKat" here's the link.
http://forum.xda-developers.com/showpost.php?p=51718316&postcount=2
---------- Post added at 08:12 AM ---------- Previous post was at 07:50 AM ----------
GUYS PLEASE HELP , ABOUT MY ERROR ON FLASHING A BOOT.IMG I GET THIS ERROR .
C:\Users\ASUS\Desktop\adb>fastboot flash boot boot.img
target reported max download size of 838860800 bytes
sending 'boot' <8192 KB>...
OkAY [ 0.281s ]
writing 'boot'...
FAILED <remote: flash failure, ErrNo:2>
finished. total time: 0.286s
HOW I FIX IT?
---------- Post added at 08:31 AM ---------- Previous post was at 08:12 AM ----------
OMG! I FINALLY FIX MY PHONE BRO
FIRST I ESCAPE FLASHING BOOT.IMG AND TRY
TO FLASH A RECOVERY.IMG THEN ITS SUCCESS TO FLASH . THEN I HOLD THE POWER BUTTONG AND MY PHONE BOOTED THEN BOOOM! MY PHONE IS COMPLETE BOOTED ITS NOT STOCK ON LOGO AND IM HAPPY AS HELL! THANKS BRO FOR SHARING SOME IDEAS NOW I HARD RESET MY PHONE AND INSTALL NEW GAMES AND APPS THANKS BROOOOOOOOOOO! :good: :highfive:

Hey, sorry for not replying, i was sleeping
Congratulations on fixing your phone too :highfive:

Related

[STOCK] system and boot flashable images KGW42N

These are the boot and system images as dumped from my moto360. They can be useful for returning to stock if something goes wrong with your device. As far as I can tell, they're good, and I have tested them in my device, but I'm not responsible if they break your device or anything else. Use them at your own risk.
They can be flashed from fastboot.
- turn off the watch
- press and hold the power button until you feel the third vibration, display will show "Bootloader version..."
- connect the jig to your watch and secure it so it will not move accidentally.
- connect the USB cable to your computer. Displaty will show "Transfer mode: USB Connected..."
- Launch a terminal session in your computer and issue the commands:
Code:
fastboot flash boot boot.img
fastboot flash system system.img
fastboot reboot
https://drive.google.com/folderview?id=0BxTLcy78OveNWDI4d1IyZHY4RUU&usp=sharing
Code:
boot.img md5: f1837f04639b9372191387632d8bf537
system.img md5: 64d028f8dc800b8ca0c716c2feacc837
Big thank you to jcase and beaups, it wouldn't have been possible without their help!
Enjoy.
To encourage more research and developments, use the donate button on the right! thanks!
Is @jcase working on a rooted boot image at this time?
Sent from my XT1049 using XDA Free mobile app
Cyphir said:
Is @jcase working on a rooted boot image at this time?
Sent from my XT1049 using XDA Free mobile app
Click to expand...
Click to collapse
Already done, I worked with @dproldan and gave him a set. Since I dont have the watch, I am leaving it up to him to publish them, or not
jcase said:
Already done, I worked with @dproldan and gave him a set. Since I dont have the watch, I am leaving it up to him to publish them, or not
Click to expand...
Click to collapse
Thanks man, and thanks for all the work you have done and continue to do for this community.
Sent from my XT1049 using XDA Free mobile app
@dproldan do you have the MD5s for those files? Google Drive doesn't seem to show them and i just want to be sure the downloads are good before I go messing with stuff.
dproldan said:
These are the boot and system images as dumped from my moto360. They can be useful for returning to stock if something goes wrong with your device. As far as I can tell, they're good, and I have tested them in my device, but I'm not responsible if they break your device or anything else. Use them at your own risk.
They can be flashed from fastboot.
- turn off the watch
- press and hold the power button until you feel the third vibration, display will show "Bootloader version..."
- connect the jig to your watch and secure it so it will not move accidentally.
- connect the USB cable to your computer. Displaty will show "Transfer mode: USB Connected..."
- Launch a terminal session in your computer and issue the commands:
Code:
fastboot flash boot boot.img
fastboot flash system system.img
fastboot reboot
https://drive.google.com/folderview?id=0BxTLcy78OveNWDI4d1IyZHY4RUU&usp=sharing
Code:
boot.img md5: f1837f04639b9372191387632d8bf537
system.img md5: 64d028f8dc800b8ca0c716c2feacc837
Big thank you to jcase and beaups, it wouldn't have been possible without their help!
Enjoy.
Click to expand...
Click to collapse
Hey Bro, can you pull the recovery.img from the device? I want to begin work on CWMT/TWRP, but I need the recovery.img. I'm getting the watch tomorrow, and I want to have a build of TWRP ready for it
EDIT: Appears I also need a recovery.fstab for this device.
---------- Post added at 10:59 PM ---------- Previous post was at 10:49 PM ----------
jcase said:
Already done, I worked with @dproldan and gave him a set. Since I dont have the watch, I am leaving it up to him to publish them, or not
Click to expand...
Click to collapse
Got a question for you. I know that according to the instructions in the Bootable rooted image thread, it says just to "fastboot boot boot.img" and that will root the device... why does that root the device/why wouldn't you flash it? If you just boot it, won't you loose it on reboot?
Also, I know that there was some hubbub about the fact that you can "fastboot boot" a kernel without an unlocked BL, does that mean that we can use the rooted boot.img without unlocking our BL?
Thanks a billion,
dproldan said:
These are the boot and system images as dumped from my moto360. They can be useful for returning to stock if something goes wrong with your device. As far as I can tell, they're good, and I have tested them in my device, but I'm not responsible if they break your device or anything else. Use them at your own risk.
They can be flashed from fastboot.
- turn off the watch
- press and hold the power button until you feel the third vibration, display will show "Bootloader version..."
- connect the jig to your watch and secure it so it will not move accidentally.
- connect the USB cable to your computer. Displaty will show "Transfer mode: USB Connected..."
- Launch a terminal session in your computer and issue the commands:
Code:
fastboot flash boot boot.img
fastboot flash system system.img
fastboot reboot
https://drive.google.com/folderview?id=0BxTLcy78OveNWDI4d1IyZHY4RUU&usp=sharing
Code:
boot.img md5: f1837f04639b9372191387632d8bf537
system.img md5: 64d028f8dc800b8ca0c716c2feacc837
Big thank you to jcase and beaups, it wouldn't have been possible without their help!
Enjoy.
To encourage more research and developments, use the donate button on the right! thanks!
Click to expand...
Click to collapse
has anyone tested these images on there device yet or have they just been pulled and posted?
Tomsgt said:
has anyone tested these images on there device yet or have they just been pulled and posted?
Click to expand...
Click to collapse
came up with a little something http://www.rootjunky.com/motorola-moto-360-super-tool/ will make a post on this when i get some time.
I am trying to root my moto360 but it gets stuck on downloading boot.img . Any solutions?
i tried to flash these today, got FAILED bad file descriptor. now my moto 360 won't boot ): haha, time to try and fix this thing
edit: got it to flash, but it boots into the android laying on it's back with the red exclamation point. any help would be appreciated
come over to #moto360 on freenode ( you can use http://webchat.freenode.net/) and we'll see what happened.
beats4x said:
i tried to flash these today, got FAILED bad file descriptor. now my moto 360 won't boot ): haha, time to try and fix this thing
edit: got it to flash, but it boots into the android laying on it's back with the red exclamation point. any help would be appreciated
Click to expand...
Click to collapse
You have to use the mfastboot.exe to flash system.IMG to this device or you will end up in a recovery bootloop. Also try using my tool linked 2 post above.
---------- Post added at 12:06 PM ---------- Previous post was at 12:06 PM ----------
vincenzo697 said:
I am trying to root my moto360 but it gets stuck on downloading boot.img . Any solutions?
Click to expand...
Click to collapse
Make sure the moto 360 has at least 80% battery before flashing.
dproldan said:
come over to #moto360 on freenode ( you can use http://webchat.freenode.net/) and we'll see what happened.
Click to expand...
Click to collapse
thanks, i will definitely stop by if i need to in the future
Tomsgt said:
You have to use the mfastboot.exe to flash system.IMG to this device or you will end up in a recovery bootloop. Also try using my tool linked 2 post above.
---------- Post added at 12:06 PM ---------- Previous post was at 12:06 PM ----------
Make sure the moto 360 has at least 80% battery before flashing.
Click to expand...
Click to collapse
Your tool got it up and running for me. thank you so much dude! much appreciated. as i love learning the why behind the how, how come it causes a bootloop unless you use that specific variant of fastboot? is mfastboot a motorola variant of fastboot that's needed with their boot.img's?
i've had nexus, htc, and lg devices before, so this is my first run with motorola.
beats4x said:
thanks, i will definitely stop by if i need to in the future
Your tool got it up and running for me. thank you so much dude! much appreciated. as i love learning the why behind the how, how come it causes a bootloop unless you use that specific variant of fastboot? is mfastboot a motorola variant of fastboot that's needed with their boot.img's?
i've had nexus, htc, and lg devices before, so this is my first run with motorola.
Click to expand...
Click to collapse
Yes it is a Motorola fastboot file. The normal fastboot.exe is limited a certain size. The moto fastboot let's you flash bigger images its more or less a upgraded fastboot file.
Tomsgt said:
Yes it is a Motorola fastboot file. The normal fastboot.exe is limited a certain size. The moto fastboot let's you flash bigger images its more or less a upgraded fastboot file.
Click to expand...
Click to collapse
forsure, makes since. If i move mfastboot to my adb/fastboot directory, and use mfastboot commands, will that work? I prefer not to use toolkits when i don't have to (not that i'm not thankful for yours, it rescued my device lol)
beats4x said:
forsure, makes since. If i move mfastboot to my adb/fastboot directory, and use mfastboot commands, will that work? I prefer not to use toolkits when i don't have to (not that i'm not thankful for yours, it rescued my device lol)
Click to expand...
Click to collapse
Yes that should work just fine. I also like the manual commands but for the noons I make these fun super tools
Tomsgt said:
Yes that should work just fine. I also like the manual commands but for the noons I make these fun super tools
Click to expand...
Click to collapse
and i'm sure they help out quite a bit :silly: thanks for your help, it's much appreciated
Tomsgt said:
You have to use the mfastboot.exe to flash system.IMG to this device or you will end up in a recovery bootloop. Also try using my tool linked 2 post above.
---------- Post added at 12:06 PM ---------- Previous post was at 12:06 PM ----------
Make sure the moto 360 has at least 80% battery before flashing.
Click to expand...
Click to collapse
I tried with fully charged battery and still it gets stuck on downloading boot.img I follow exactly the tutorial and everything on my Moro360 is the same as the video until it sticks on the downloading boot.img
vincenzo697 said:
I tried with fully charged battery and still it gets stuck on downloading boot.img I follow exactly the tutorial and everything on my Moro360 is the same as the video until it sticks on the downloading boot.img
Click to expand...
Click to collapse
my super tool thread can be found here now please try it. http://forum.xda-developers.com/moto-360/development/script-motorola-moto-360-super-tool-t2897690
dproldan said:
These are the boot and system images as dumped from my moto360. They can be useful for returning to stock if something goes wrong with your device. As far as I can tell, they're good, and I have tested them in my device, but I'm not responsible if they break your device or anything else. Use them at your own risk.
They can be flashed from fastboot.
- turn off the watch
- press and hold the power button until you feel the third vibration, display will show "Bootloader version..."
- connect the jig to your watch and secure it so it will not move accidentally.
- connect the USB cable to your computer. Displaty will show "Transfer mode: USB Connected..."
- Launch a terminal session in your computer and issue the commands:
Code:
fastboot flash boot boot.img
fastboot flash system system.img
fastboot reboot
https://drive.google.com/folderview?id=0BxTLcy78OveNWDI4d1IyZHY4RUU&usp=sharing
Code:
boot.img md5: f1837f04639b9372191387632d8bf537
system.img md5: 64d028f8dc800b8ca0c716c2feacc837
Big thank you to jcase and beaups, it wouldn't have been possible without their help!
Enjoy.
To encourage more research and developments, use the donate button on the right! thanks!
Click to expand...
Click to collapse
im havving this problem, any advice??
sending 'boot' (16384 KB)...
FAILED (remote: unsupported command)
finished. total time: 0.006s
same with system
sending 'system' (49152 KB)...
FAILED (remote: unsupported command)
finished. total time: 0.006s
help please

Fast boot mode started, can't go to download mode

Hi Everyone
Sorry for my not so good English.
I have problem with my G3 and maybe someone can help? I instal root without problem, than I try to install Twrp recovery and after that I have that message ( [780] fast boot mode started) all the time, I try to do hard reset, click yes twice, but getting the same message, Is there any chance to unbrick that device when I can't go even to download mode?
Thank You very much for any suggestions
help!
help my G3 died the same thing happened!
same to me...
What model(s)? Youll need a pc, adb/fastboot, stock laf.img and boot.img for your device. Youll use adb commands to erase these img files and restore them with the new ones. Once you have adb running and recognizing your device with both files in same folder as adb you'll type adb erase laf [Enter] then adb flash laf laf.img [Enter] do the same steps for the boot.img. Next type adb reboot [Enter] you'll still be in fastboot but just pull the battery. Then replace battery and you should be able to enter download mode by inserting the usb and pressing vol +(i believe, it's been a while) and then kdz flash..
lg g3. maybe you have link ? how to do this..
Thanks.
nerija.nest said:
lg g3. maybe you have link ? how to do this..
Thanks.
Click to expand...
Click to collapse
I know its an lg g3 but what model. I dont have a link to these files and don't feel like searching youll have to search the forum.. Also I just told you how to do this..
D855 16gb , This is what needs to be missed for several days in search of forum. Will be a beautiful day..
nerija.nest said:
D855 16gb , This is what needs to be missed for several days in search of forum. Will be a beautiful day..
Click to expand...
Click to collapse
Ok well I'll meet you in the middle. Heres the link to the d855 partion files http://forum.xda-developers.com/showthread.php?t=2766437. I believe you'll need the second link in the ops first post. As far as adb.. If you dont know how to use it or get the files, Google should be able to help you.
Swizzle82 said:
Ok well Ill meet you in the middle. Heres the link to the d855 partion files http://forum.xda-developers.com/showthread.php?t=2766437. I believe youll need the second link in the ops first post. As far as adb.. If you dont know how to use it or get the files, Google should
be able to help you.
Click to expand...
Click to collapse
Did he drag the .img to the command prompt in order for it work. So its flash laf (the file that is dragged) next do the same thing with boot.img ( flash boot (drag boot file)) and the recovery.img
---------- Post added at 07:47 PM ---------- Previous post was at 07:46 PM ----------
Its suppose to boot up the phone with no problem
i have one problem, not can write files FAILED (remote: flash write failure fastboot unlock , bet I not can write and erase... failure...
download mode problem
I couldn't fix this problem.
[520] Fastboot mode started
[610]--reset--
[610]--portchange--
[730] fastboot: processing commads
can't go to download.I tried adb erase laf adb erase boot I guess I couldn't do.help
if not done contact fb tungkick777 i can help all every body free
fastboot mode started
plz
tungkick said:
if not done contact fb tungkick777 i can help all every body free
Click to expand...
Click to collapse
I have the same problem.. i have d852.. please help!!
i have the same problems after the new upgrade to lollipo 20E vodafone Italy..
Same here
Edit: Solved
1) Took battery and USB Cable off
2) Pressed Volume Up
3) Took battery back while pressing volume up
4) Inserted USB Cable while pressing volume up
5) Phone started Download Mode
6) installed kdz through LG Flash Tools
Right now typing from my LG G3
Great!!!
Thank you very mucho Fusquinha77!!!
I cant get it, I use every way(erase boot,system,recovery, use advence power menu ext..)
But i cant go to download mode
Sent from my Smartfren Andromax AD6B1H using XDA Free mobile app
Fusquinha77 said:
Same here
Edit: Solved
1) Took battery and USB Cable off
2) Pressed Volume Up
3) Took battery back while pressing volume up
4) Inserted USB Cable while pressing volume up
5) Phone started Download Mode
6) installed kdz through LG Flash Tools
Right now typing from my LG G3
Click to expand...
Click to collapse
I can see a different screen for a split of a second but it's going back to Fastboot mode...
@SaharLevi
Here's the fix Quick and easy
need to have fastboot, I used ubuntu can install with sudo apt-get install android-tools-fastboot
info on fastboot
[TOOL] [WINDOWS] ADB, Fastboot and Drivers - 15 seconds ADB Installer
also need recovery.img, I used the lastest twrp
In terminal
fastboot boot recovery.img
this will boot your phone with the img on your computer.
in recovery restore or install a good boot or kernel.
your phone should be good to go after that.
I had my phone fixed in about 5 min, I really should not play around with boot partition.
Also should be able to flash boot if you have a good one,
fastboot flash boot boot.img

Bootloop without USB Debug

My ZE551ML was rooted and I decided to update it being unaware that I was supposed to unroot it before updating. Once I got to the recovery menu, I attempted to sideload the newest firmware but the device was not found despite being able to be found during the bootloop. I then performed a factory reset and now it is stuck on a bootloop and cannot be detected by adb at any point.
U can use fastboot to flash ur device
But be careful with it u can hard brick ur device if done the wrong way
Sent from my Karbonn A1+ Super using XDA Free mobile app
yakub234go said:
U can use fastboot to flash ur device
But be careful with it u can hard brick ur device if done the wrong way
Sent from my Karbonn A1+ Super using XDA Free mobile app
Click to expand...
Click to collapse
But how do I fastboot to flash? Every tutorial I found told me to use adb sideload which I never found possible.
Edit:
I solved my problem by copying the firmware I downloaded into an external sd card under the name MOFD_SDUPDATE.zip and going to recovery mode.
download full firmware according to ur device from here https://mega.co.nz/#F!k4MHiAgL!dVuOKeH3eokcwPSNI79ffw give Thanks @shakalaca for this
download (Z00A)2.19.40.18 if u want to unlock ur bootloader cause latest one cause problems with unlocking bootloader
when the device is off press power wait till it vibrates once then immediately press vol up button
u will boot into fastboot mode
there u can use fastboot commands
now form ur pc go to the path where u downloaded the firmware
press & hold shift & right click
select open command window here
now in command prompt give these commands
fastboot flash boot boot.img
fastboot flash fastboot droidboot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot reboot
all done ur device will reboot
now u have a rooted device
remember if u want to update than first unroot it reboot than update
where do u get the system.img?
im also in a similar situation where im out of usb debug cause of factory reset
loganj said:
where do u get the system.img?
im also in a similar situation where im out of usb debug cause of factory reset
Click to expand...
Click to collapse
Here - http://forum.xda-developers.com/zenfone2/orig-development/rom-pre-root-img-t3079590
ultramag69 said:
Here - http://forum.xda-developers.com/zenfone2/orig-development/rom-pre-root-img-t3079590
Click to expand...
Click to collapse
thank you
well i manage to do adb sideload even though my phone was wiped completely clean from recovery and still unable to start the android.... it was a miracle . but thanks to your link i know now how to get the system.img
now if i can only understand what system.img is compare to entire firmware zip.....probably i should try to mount one and have a look
loganj said:
thank you
well i manage to do adb sideload even though my phone was wiped completely clean from recovery and still unable to start the android.... it was a miracle . but thanks to your link i know now how to get the system.img
now if i can only understand what system.img is compare to entire firmware zip.....probably i should try to mount one and have a look
Click to expand...
Click to collapse
System.img is the entire firmware except for boot, droidboot and recovery... These can be flashed separately BUT make sure you use the right commands...
If you get to the usb symbol only displaying on your screen, you've stuffed up and it is a true brick...
yakub234go said:
when the device is off press power wait till it vibrates once then immediately press vol up button
u will boot into fastboot mode
there u can use fastboot commands
now form ur pc go to the path where u downloaded the firmware
press & hold shift & right click
select open command window here
now in command prompt give these commands
fastboot flash boot boot.img
fastboot flash fastboot droidboot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot reboot
all done ur device will reboot
now u have a rooted device
remember if u want to update than first unroot it reboot than update
Click to expand...
Click to collapse
Hey the procces struck whe i flash system img, stuck at "sending sparse 'system' (524056 KB)" Can you help me please?
After a long time waiting, probably over 1 hour i touch my phone screen then it just powered off suddenly. I really need help please
EDIT: i figured out that when sending sparse, after 10 second my phone just turned off
Maybe this tutorial works for you: http://www.asus.com/zentalk/forum.php?mod=viewthread&tid=12528
Sent from my GT-I9500
krasCGQ said:
Maybe this tutorial works for you:
Sent from my GT-I9500
Click to expand...
Click to collapse
I can't access my phone, how am i gonna turn on USB Debuggin when it's on bootloop ?
okokokokok i meet it
i have done adb side load but cant turn my phone. so, i went fastboot mode to flash it. but the bootloader is locked and cannot unlock it. when i enter the command flashing unlock,there is no response in the command prompt. can you also tell me how can i turn on usb debugging without switch on my android phone
I have the same problem than vinod.katakam!
I try to update my Asus Zenfone 2 Laser (ze601kl), to a recente version of Android, because i'm stuck on a older version of Lollipop.
My system had a SKU WW, so i downloaded the recent version WW (marshmallow) from Asus website, and treid to update, and that gives me an error. But i reboot the phone a it works fine. But still on my old android version.
Then i tried to just update to a more recent version of Lollipop, the process appears to start fine, but then it gives me an error. Now, i tried to reboot and i end up with a endless bootloop.
I tried everithing, update by adb (cant open the file), update by sdcard (E:Error in /sideload/package.zip (Status 1) E: fota_return_code 408), and fastboot boot.img, recovery.img, but on system.img says the file is to big.
I dont have de USB Debbugind activated. Is that a problem?
I dont have important data on the phone, i just want to make it work again.
Please help!!!!
pedrofg said:
I have the same problem than vinod.katakam!
I try to update my Asus Zenfone 2 Laser (ze601kl), to a recente version of Android, because i'm stuck on a older version of Lollipop.
My system had a SKU WW, so i downloaded the recent version WW (marshmallow) from Asus website, and treid to update, and that gives me an error. But i reboot the phone a it works fine. But still on my old android version.
Then i tried to just update to a more recent version of Lollipop, the process appears to start fine, but then it gives me an error. Now, i tried to reboot and i end up with a endless bootloop.
I tried everithing, update by adb (cant open the file), update by sdcard (E:Error in /sideload/package.zip (Status 1) E: fota_return_code 408), and fastboot boot.img, recovery.img, but on system.img says the file is to big.
I dont have de USB Debbugind activated. Is that a problem?
I dont have important data on the phone, i just want to make it work again.
Please help!!!!
Click to expand...
Click to collapse
if you are on 64 bit windows and fastboot flash system system.img gives you error. probably you are not using 64 bit fastboot tool below is the link to 64 bit tool
https://drive.google.com/open?id=0B72QQTXqZSRwUkFRMl81b1pWa0k
The problem still remains!
The problem still remains!
"C:\adb>fastboot flash system system.img
target reported max download size of 268435456 bytes
erasing 'system'...
OKAY [ 0.022s]
sending sparse 'system' 1/12 (259338 KB)...
OKAY [ 11.418s]
writing 'system' 1/12...
FAILED (remote: size too large)
finished. total time: 11.471s"
Hello guys!
Well, i manage to understand my problem and solv it!
I bought my phone from Gearbest, and the problem begins there. Why? Because, regarless my phone is a CN device, it came somehow with a WW sku. You must know that a CN device have system partition smaller than the WW device.
So, when i tried to updated it with a more recent WW system there was no room for that, and the instalation stops with a error message.
After many "Trial and error", i understand what my problem is, and tried to install a CN system version by "fastboot flash" with a system.img with root that i find here: "https://mega.nz/#F!lodnzDhK!H5ChxausDTyko1qGlnF7dw"
To fastboot i used the fastboot tool that sukhwant717 told me to, in the post #15.
Well, that worked, so i now have a phone working. Them i go to Asus website and downloaded the latest CN firmware to my divece, copy it by USB to the internal memory of my device and upgrade it.
So, now i have a phone working with a factory system but with no google apps.
I found this website with google installer: "https://www.digitbin.com/google-installer-apk/" follow the intructions and finaly i have Google play in my phone!
Now everithing works fine!
I hope that my story could help someone with the same problem!

[SOLVED] Could not install TWRP

Hi,
I want to enable dualsim on my singlesim device and for that the TWRP has to be installed. After checking many threads, which less or more describe the same steps, I managed to unlock the bootloader and downloaded an "unofficial" twrp image for the Moto Z Play. But on the last step while trying to flash it I got the error "Image not signed or corrupt" and the image is not installed. Here is the output by flashing:
Code:
D:\Programs\Minimal ADB and Fastboot>fastboot.exe flash recovery twrp-3.1.1-0-addison.img
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
(bootloader) has-slot:recovery: not found
target reported max download size of 536870912 bytes
sending 'recovery' (11374 KB)...
OKAY [ 0.255s]
writing 'recovery'...
(bootloader) Image not signed or corrupt
OKAY [ 0.246s]
finished. total time: 0.510s
Is there a way to avoid this error ?
Use: "fastboot flash recovery twrp.img" no quotes. I change the filename to just "twrp.img" less chance of typing something wrong.
and no the .exe you did.
FSabbane said:
Hi,
I want to enable dualsim on my singlesim device and for that the TWRP has to be installed. After checking many threads, which less or more describe the same steps, I managed to unlock the bootloader and downloaded an "unofficial" twrp image for the Moto Z Play. But on the last step while trying to flash it I got the error "Image not signed or corrupt" and the image is not installed. Here is the output by flashing:
Is there a way to avoid this error ?
Click to expand...
Click to collapse
I think it is flashed. After flashing the twrp via fastboot and u see that error then just ignore it, instead directly boot your phone in recovery mode using the volume buttons and look for the word "recovery" then press on power button then it booted there.
Jimi Mack said:
Use: "fastboot flash recovery twrp.img" no quotes. I change the filename to just "twrp.img" less chance of typing something wrong.
and no the .exe you did.
Click to expand...
Click to collapse
I've changed the filename to "twrp.img" and used the command:
Code:
fastboot flash recovery twrp.img
The output is exactly the same as before.
Kap_Tutan said:
I think it is flashed. After flashing the twrp via fastboot and u see that error then just ignore it, instead directly boot your phone in recovery mode using the volume buttons and look for the word "recovery" then press on power button then it booted there.
Click to expand...
Click to collapse
unfortunatly not, after entering the recovery mode I see the message "no command" and I have to hold the power button and press volume up to enter into the Android Recovery menu.
FSabbane said:
unfortunatly not, after entering the recovery mode I see the message "no command" and I have to hold the power button and press volume up to enter into the Android Recovery menu.
Click to expand...
Click to collapse
Try to redownload the twrp again, try to use the lower version not the updated one. And after u flash that then update it with the newest one. Lets see if its work
Kap_Tutan said:
Try to redownload the twrp again, try to use the lower version not the updated one. And after u flash that then update it with the newest one. Lets see if its work
Click to expand...
Click to collapse
I've tried with the following images:
twrp-3.1.1-0-addison.img
twrp-3.1.0-0-addison.img
twrp-3.0.2-0-addison.img
which were downloaded from the url: https://www.androidfilehost.com/?w=files&flid=126925
The result is the same by all of them.
Just to be sure, the image should be copied within the "ADB/Fastboot" folder on my PC and not on the device storage/SD card, isn't it ?
FSabbane said:
I've tried with the following images:
twrp-3.1.1-0-addison.img
twrp-3.1.0-0-addison.img
twrp-3.0.2-0-addison.img
which were downloaded from the url: https://www.androidfilehost.com/?w=files&flid=126925
The result is the same by all of them.
Just to be sure, the image should be copied within the "ADB/Fastboot" folder on my PC and not on the device storage/SD card, isn't it ?
Click to expand...
Click to collapse
Did u unlock bootloader?
Yap it should be in pc adb folder
Kap_Tutan said:
Did u unlock bootloader?
Yap it should be in pc adb folder
Click to expand...
Click to collapse
Yes, I did unlock it with the unlock key received from motorola:
Code:
fastboot oem unlock UNLOCK_KEY
After that a message is displayed at each start:
your device has been unlocked and can't be trusted
ID: bad key
your device will boot in 5 seconds
Click to expand...
Click to collapse
FSabbane said:
Yes, I did unlock it with the unlock key received from motorola:
After that a message is displayed at each start:
Click to expand...
Click to collapse
After flashing twrp do not boot the phone otherwise the stock recovery will over write twrp,
After twrp is flashed while still in fastboot mode, use the volume buttons and select recovery on the menu.
flashallthetime said:
After flashing twrp do not boot the phone otherwise the stock recovery will over write twrp,
After twrp is flashed while still in fastboot mode, use the volume buttons and select recovery on the menu.
Click to expand...
Click to collapse
That was it, at each boot the recovery partition was overwritten.
Thank you very much for the help !
still doesn't work for me
FSabbane said:
That was it, at each boot the recovery partition was overwritten.
Thank you very much for the help !
Click to expand...
Click to collapse
I am still getting error saying your device is unlocked can't be trusted and will be restarted in 5 seconds,
please help me out. Also need adb zip file
velpoori said:
I am still getting error saying your device is unlocked can't be trusted and will be restarted in 5 seconds,
please help me out. Also need adb zip file
Click to expand...
Click to collapse
This is not an error. If your bootloader is unlocked this message will display at every boot.
velpoori said:
I am still getting error saying your device is unlocked can't be trusted and will be restarted in 5 seconds,
please help me out. Also need adb zip file
Click to expand...
Click to collapse
As Fandroid mentioned, it's not an error. My device also diplays it at startup.
I've added to this post a zip file that contains adb, fastboot and twrp version used to configure my device.
FSabbane said:
As Fandroid mentioned, it's not an error. My device also diplays it at startup.
I've added to this post a zip file that contains adb, fastboot and twrp version used to configure my device.
Click to expand...
Click to collapse
Have you installed twrp successfully and which OS r u running on your moto z play right now, how is it?
velpoori said:
Have you installed twrp successfully and which OS r u running on your moto z play right now, how is it?
Click to expand...
Click to collapse
I wanted twrp just to create a backup and configure my device to support dualsim. Therefore and as mentioned in a previous post, TWRP is installed only momentarly and after a reboot it would be overwritten.
My OS is the Moto Android 7.0.
What is the issue that you have now ?
FSabbane said:
I wanted twrp just to create a backup and configure my device to support dualsim. Therefore and as mentioned in a previous post, TWRP is installed only momentarly and after a reboot it would be overwritten.
My OS is the Moto Android 7.0.
What is the issue that you have now ?
Click to expand...
Click to collapse
As I told earlier I am not able to install twrp due to which I am not able to install custom rom. I tried many times to install twrp, everytime it showed "image is not found" as you guys said I tried going recovery but again it shows you already unlocked boot loader, your device can't be trusted then says " your device will reboot in 5 seconds" this is what my issue is.
velpoori said:
As I told earlier I am not able to install twrp due to which I am not able to install custom rom. I tried many times to install twrp, everytime it showed "image is not found" as you guys said I tried going recovery but again it shows you already unlocked boot loader, your device can't be trusted then says " your device will reboot in 5 seconds" this is what my issue is.
Click to expand...
Click to collapse
So that we can see where you're stuck at the moment, please follow this guide and tell us which step didn't work :
https://www.obeygeek.com/install-twrp-recovery-on-moto-z-play/
P.S.: use the adb, fastboot and twrp image I've sent you in the previous post.
FSabbane said:
So that we can see where you're stuck at the moment, please follow this guide and tell us which step didn't work :
https://www.obeygeek.com/install-twrp-recovery-on-moto-z-play/
P.S.: use the adb, fastboot and twrp image I've sent you in the previous post.
Click to expand...
Click to collapse
I will try once I reach home by 6pm, you are so helpful thank you...
FSabbane said:
I wanted twrp just to create a backup and configure my device to support dualsim. Therefore and as mentioned in a previous post, TWRP is installed only momentarly and after a reboot it would be overwritten.
Click to expand...
Click to collapse
It makes no sense then to flash it. Why don't you just use
fastboot boot twrp.img
when you want to start it? Then no flash will be involved, and twrp will be just booted for this single usage. You can repeat this whenever you need it.

I can not do unbrick ZX551ML

I can not get into the fastboot anymore after a frustrated attempt to downgrade, I do not find zenfone zoom files (ZX551-ML) to use through the Asus Flash tool, I tried some things and to no avail, could anyone please help me?
Hi, have you solved it?
mauricionunessouza said:
I can not get into the fastboot anymore after a frustrated attempt to downgrade, I do not find zenfone zoom files (ZX551-ML) to use through the Asus Flash tool, I tried some things and to no avail, could anyone please help me?
Click to expand...
Click to collapse
Hi, have you solved it?
If you still there, Ithink Ican help you.
arturmaj said:
If you still there, Ithink Ican help you.
Click to expand...
Click to collapse
I have bricked my zx551ml, please help me. I'm in bootlogo but asus flashtool doesn't work.
a.cocivera said:
I have bricked my zx551ml, please help me. I'm in bootlogo but asus flashtool doesn't work.
Click to expand...
Click to collapse
Does fastboot work? Run "fastboot devices" this should show your phone.
No fastboot doesn't work, i have just a usb image. I need the 3 files for xFSTK downloader.
---------- Post added at 02:56 PM ---------- Previous post was at 02:23 PM ----------
arturmaj said:
Does fastboot work? Run "fastboot devices" this should show your phone.
Click to expand...
Click to collapse
No fastboot doesn't work, i have just a usb image. I need the 3 files for xFSTK downloader.
a.cocivera said:
No fastboot doesn't work, i have just a usb image. I need the 3 files for xFSTK downloader.
---------- Post added at 02:56 PM ---------- Previous post was at 02:23 PM ----------
No fastboot doesn't work, i have just a usb image. I need the 3 files for xFSTK downloader.
Click to expand...
Click to collapse
Use those three: https://drive.google.com/open?id=0B57GC_zqe_v5LVRjSm5pbkJtaTQ
arturmaj said:
Use those three: https://drive.google.com/open?id=0B57GC_zqe_v5LVRjSm5pbkJtaTQ
Click to expand...
Click to collapse
Thanks for the help, but i tried many times and not works (XSFTK-LOG--Abort......Attempt1;Attempt2,etc)
Wrong files. I tried zenfone 2 files and the download finish correctly, but at the end appear a battery and i have to disconnect the battery.
a.cocivera said:
Thanks for the help, but i tried many times and not works (XSFTK-LOG--Abort......Attempt1;Attempt2,etc)
Wrong files. I tried zenfone 2 files and the download finish correctly, but at the end appear a battery and i have to disconnect the battery.
Click to expand...
Click to collapse
I revived my Zenfone Zoom with these files dnx and droidboot are the same as for ZE551ml only ifwi is for ZX551ML. Ifwi should be taken from the last stock upgrade. The file is zipeed in ifwi.zip.
arturmaj said:
I revived my Zenfone Zoom with these files dnx and droidboot are the same as for ZE551ml only ifwi is for ZX551ML. Ifwi should be taken from the last stock upgrade. The file is zipeed in ifwi.zip.
Click to expand...
Click to collapse
I downloaded ifwi file from the stock firmware. It works!! Now i need the stock firmware (WW-4.21.40.209) in raw version . Can you help me?
a.cocivera said:
I downloaded ifwi file from the stock firmware. It works!! Now i need the stock firmware (WW-4.21.40.209) in raw version . Can you help me?
Click to expand...
Click to collapse
Use the highest version you can get from https://forum.xda-developers.com/zenfone2/general/z008-z00a-z00d-z00x-raw-fw-collection-t3448966 and then OTA asus upgrade.
arturmaj said:
Use the highest version you can get from https://forum.xda-developers.com/zenfone2/general/z008-z00a-z00d-z00x-raw-fw-collection-t3448966 and then OTA asus upgrade.
Click to expand...
Click to collapse
Asus Flashtool doesn't recognize my zoom because the serial number is corrupted (0123456789abcdef) , what can i do?
a.cocivera said:
Asus Flashtool doesn't recognize my zoom because the serial number is corrupted (0123456789abcdef) , what can i do?
Click to expand...
Click to collapse
I had the same problem. The first time it didn't work but the second the serial number was corrected and all went well.
There is a manual way to upload the raw using fastboot. Just look inside the update.bat. You can even rubn it instead of using flashtool.
---------- Post added at 12:57 PM ---------- Previous post was at 12:55 PM ----------
arturmaj said:
I had the same problem. The first time it didn't work but the second the serial number was corrected and all went well.
There is a manual way to upload the raw using fastboot. Just look inside the update.bat. You can even rubn it instead of using flashtool.
Click to expand...
Click to collapse
Sorry "You can even run it (update.bat) insead of using the flashtool.
arturmaj said:
I had the same problem. The first time it didn't work but the second the serial number was corrected and all went well.
There is a manual way to upload the raw using fastboot. Just look inside the update.bat. You can even rubn it instead of using flashtool.
---------- Post added at 12:57 PM ---------- Previous post was at 12:55 PM ----------
Click to expand...
Click to collapse
I tried lot of times with Asus Flash Tool but it doesn't work. Could you please explain me the manual procedure? I extracted the raw firmware in to a folder with 7zip.
a.cocivera said:
I tried lot of times with Asus Flash Tool but it doesn't work. Could you please explain me the manual procedure? I extracted the raw firmware in to a folder with 7zip.
Click to expand...
Click to collapse
Update.bat(batch file) is a Collection of commands to run. You can just doubleclick it or copy and paste each line to a cdm.exe window.
arturmaj said:
Update.bat(batch file) is a Collection of commands to run. You can just doubleclick it or copy and paste each line to a cdm.exe window.
Click to expand...
Click to collapse
Now i have a bootloader with fastboot, no recovery, serial: 0123456789abcdef, a downgraded firmware 115 MM. The smartphone is in bootloop, infinite circle, but i can charge it. Adb commands does not work, and now?
a.cocivera said:
Now i have a bootloader with fastboot, no recovery, serial: 0123456789abcdef, a downgraded firmware 115 MM. The smartphone is in bootloop, infinite circle, but i can charge it. Adb commands does not work, and now?
Click to expand...
Click to collapse
Have you read my post? Did you look inside update.bat?
arturmaj said:
Have you read my post? Did you look inside update.bat?
Click to expand...
Click to collapse
Yes I did it. Now i have a complete bootloader, recovery stock but nothing to do, the zoom doesn,'t start , infinite boot .
I started again from xSFTK (success), after , Asus Fash Tool (success). In ADB:
fastboot flash splashscreen splashscreen.img
fastboot fastboot flash droidboot.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot reboot
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash splashscreen splashscreen.img
target reported max download size of 536870912 bytes
sending 'splashscreen' (464 KB)...
OKAY [ 0.179s]
writing 'splashscreen'...
FAILED (remote: Can not mount the necessary partition)
finished. total time: 0.349s
After flashing with Asus Flash Tool, how many minutes i have to wait to boot the system? I think my zoom is broken.

Categories

Resources