Develop Bugs

Galaxy S4 SPH-L720 Language.

Hello everyone!
I just bought a SPH-L720 on amazon and the seller didn't send me the i9505 as he promised. This week I did unlock the cellphone and it's working fine here in Brasil. The main question is: Is there anyway to configure it on Brazilian Portuguese? There isn't this option to choose as a language. Can I use some rom or root it to get my country language?

go to samfirmware and download Unknown firmware for sph-l720
that Ok

did not work.
astrenoc said:
go to samfirmware and download Unknown firmware for sph-l720
that Ok
Click to expand...
Click to collapse
I did what you said and, it did not work.
Downloaded the unknown firmware, used odin to instal it and, the portuguese language did not apeared.
Please, is there anything that I can do to solve this problem?

lsn_82 said:
I did what you said and, it did not work.
Downloaded the unknown firmware, used odin to instal it and, the portuguese language did not apeared.
Please, is there anything that I can do to solve this problem?
Click to expand...
Click to collapse
instal a custom firmware
Cyanogenmod or else
---------- Post added at 10:29 AM ---------- Previous post was at 10:14 AM ----------
astrenoc said:
instal a custom firmware
Cyanogenmod or else
Click to expand...
Click to collapse
go to get.cm and install a stable version of fltespr Samsung Galaxy S4 (Sprint)

It didn't work.
astrenoc said:
instal a custom firmware
Cyanogenmod or else
---------- Post added at 10:29 AM ---------- Previous post was at 10:14 AM ----------
go to get.cm and install a stable version of fltespr Samsung Galaxy S4 (Sprint) [/Q
I couldn't find any firmwarefor my device in this website. Does anyone else can help me?
Click to expand...
Click to collapse

cm l720
install this
look attachments

astrenoc said:
install this
look attachments
Click to expand...
Click to collapse
Ok, I just downloaded the file and now, do I need to use Odin or something like that or may I move it to my device storage?

install CM on CWM
firstly your l 720 must be rooted
Keep your galaxy S4 charged to a minimum of 85% so it does not shut off during the ROM installation.
Boot your galaxy S4 into recovery mode by pressing Volume down + home button + power button. As soon as you see the warning screen, press Volume up. You are now in your custom recovery mode.
Now select Clear cache and then select clear dalvik cache under Advanced. Go back to the recovery menu and select Data Wipeout / Factory Reset.
Next, click Install Zip from SD Card and choose the CyanogenMod 10.2 custom ROM zip file to install it. Done? Now, select the Install Zip from SD Card option again and choose the ZIP file pasted to your SD card earlier.

Did not work.
Hello,
I did everything that you guys told me to do but, without any success.
I did unlock the cellphone but, I'm not able to configure the apn to use 3g/4g from Brasil and to set it up with Brasilian Portuguese.
Is there anything else I can do to try it again?
Ps.: I'm a beginner with android configuration and, if you guys have some easy mode to root and configure it, I'll apreciate your help.
Thanks!
astrenoc said:
firstly your l 720 must be rooted
Keep your galaxy S4 charged to a minimum of 85% so it does not shut off during the ROM installation.
Boot your galaxy S4 into recovery mode by pressing Volume down + home button + power button. As soon as you see the warning screen, press Volume up. You are now in your custom recovery mode.
Now select Clear cache and then select clear dalvik cache under Advanced. Go back to the recovery menu and select Data Wipeout / Factory
Next, click Install Zip from SD Card and choose the CyanogenMod 10.2 custom ROM zip file to install it. Done? Now, select the Install Zip from SD Card option again and choose the ZIP file pasted to your SD card earlier.
Click to expand...
Click to collapse

i'm having the same issue. any idea?

Up!
B.U.M.P.!

!!
howa can i get the donwloaded files plz

[Q] (Q) accidentally wiped OS ,Need help getting OS back on sgh-i747

To start I bought this phone from a friend was working fine. It seemed to be rooted after going to recovery mode and realizing it was a custom recovery that I got into. I've had plenty on iPhones and androids , so far this is the first time after hours of research and trying everything that I've had to make a post asking for help. I have a sgh-i747 pebble blue ATT phone. It had 4.3 OS on it and was rooted before I acidentally wiped the OS off of it. I've tried the past few days to use Odin to get the stock firmware back on, I've tried 4.0.1 - 4.3 , no luck. Odin recognizes phone after I click start after choosing the md5 tar file it either says fail or stays at setupconnection. I've tried many times over and over unistalling and re installing drivers , kies, and downloading different firmware and every version of Odin. I need help guys please , thanks alot

k4krisbrah said:
To start I bought this phone from a friend was working fine. It seemed to be rooted after going to recovery mode and realizing it was a custom recovery that I got into. I've had plenty on iPhones and androids , so far this is the first time after hours of research and trying everything that I've had to make a post asking for help. I have a sgh-i747 pebble blue ATT phone. It had 4.3 OS on it and was rooted before I acidentally wiped the OS off of it. I've tried the past few days to use Odin to get the stock firmware back on, I've tried 4.0.1 - 4.3 , no luck. Odin recognizes phone after I click start after choosing the md5 tar file it either says fail or stays at setupconnection. I've tried many times over and over unistalling and re installing drivers , kies, and downloading different firmware and every version of Odin. I need help guys please , thanks alot
Click to expand...
Click to collapse
I can get into recovery mode but it's a custom one , and I can get into download mode. Someone please help I'm sire it's somethig small I'm missing like the correct downloads for the firmware and odin

k4krisbrah said:
I can get into recovery mode but it's a custom one , and I can get into download mode. Someone please help I'm sire it's somethig small I'm missing like the correct downloads for the firmware and odin
Click to expand...
Click to collapse
it was rooted with a custom recovery on it before i wiped the OS off , it was on 4.3 , working okay. ive tried so many firmwares , so many threads on how to , so many downloads of odin and the firmware and tried uninstalling and re installing everything from drivers to kies to everything. someone please help or forward me to a thread that WILL work. ive even tried 2 different cords and 3 different usb ports and am not using a usb hub. the pc im using recognizes my phone in odin but always either freezes after i select firmware and click start or it goes thru and comes up with fail, or failed auth. someone please help thanks.

k4krisbrah said:
it was rooted with a custom recovery on it before i wiped the OS off , it was on 4.3 , working okay. ive tried so many firmwares , so many threads on how to , so many downloads of odin and the firmware and tried uninstalling and re installing everything from drivers to kies to everything. someone please help or forward me to a thread that WILL work. ive even tried 2 different cords and 3 different usb ports and am not using a usb hub. the pc im using recognizes my phone in odin but always either freezes after i select firmware and click start or it goes thru and comes up with fail, or failed auth. someone please help thanks.
Click to expand...
Click to collapse
Since your phone was on 4.3, the only thing you can do now would be a stock restore to 4.3. Please see the thread below for the stock restore zip as well as instructions. You may use another device to copy the stock restore zip to an external SD card and then place this card in your phone, then flash from (custom) recovery. Odin cant help you now except to flash custom recovery if you need to redo this.
http://forum.xda-developers.com/showthread.php?t=2658486

Larry2999 said:
Since your phone was on 4.3, the only thing you can do now would be a stock restore to 4.3. Please see the thread below for the stock restore zip as well as instructions. You may use another device to copy the stock restore zip to an external SD card and then place this card in your phone, then flash from (custom) recovery. Odin cant help you now except to flash custom recovery if you need to redo this.
http://forum.xda-developers.com/showthread.php?t=2658486
Click to expand...
Click to collapse
the only option i have is a s3 with a lcd thats not working it will boot and go on but i cant see anything. how would i go upon sticking my sd card inside there and getting that 4.3 download on there.

k4krisbrah said:
the only option i have is a s3 with a lcd thats not working it will boot and go on but i cant see anything. how would i go upon sticking my sd card inside there and getting that 4.3 download on there.
Click to expand...
Click to collapse
i found out i have twrp custom recovery that i can access and download mode. its twrp v2.6.3.1

k4krisbrah said:
i found out i have twrp custom recovery that i can access and download mode. its twrp v2.6.3.1
Click to expand...
Click to collapse
Good you have TWRP already. You can try to see if you can save the zip to your phone's internal memory as the PC may be able to recognize it in download or recovery mode. Otherwise, you may try using any other device at all that accepts (micro) SDHC card e.g. camera, card adapter etc. You may also be able to flash the zip directly from your PC using the desktop flasher. See thread with instructions below ...
http://forum.xda-developers.com/showthread.php?t=2383148
Let me know if this works for you.
---------- Post added at 09:02 PM ---------- Previous post was at 09:00 PM ----------
Larry2999 said:
Good you have TWRP already. You can try to see if you can save the zip to your phone's internal memory as the PC may be able to recognize it in download or recovery mode. Otherwise, you may try using any other device at all that accepts (micro) SDHC card e.g. camera, card adapter etc. You may also be able to flash the zip directly from your PC using the desktop flasher. See thread with instructions below ...
http://forum.xda-developers.com/showthread.php?t=2383148
Let me know if this works for you.
Click to expand...
Click to collapse
Of course, you need to first download the stock recovery zip for TWRP to your PC.

Larry2999 said:
Good you have TWRP already. You can try to see if you can save the zip to your phone's internal memory as the PC may be able to recognize it in download or recovery mode. Otherwise, you may try using any other device at all that accepts (micro) SDHC card e.g. camera, card adapter etc. You may also be able to flash the zip directly from your PC using the desktop flasher. See thread with instructions below ...
http://forum.xda-developers.com/showthread.php?t=2383148
Let me know if this works for you.
---------- Post added at 09:02 PM ---------- Previous post was at 09:00 PM ----------
Of course, you need to first download the stock recovery zip for TWRP to your PC.
Click to expand...
Click to collapse
thanks so much for your help. i took my s3 that had a bad lcd and put my sd in that and moved the zip file i downloaded here http://forum.xda-developers.com/showthread.php?t=2658486 then i flashed it from twrp and wiped cache and all that good stuff everything was fine after that. only question i have for you now is to root or not to root , i forget the pros and cons of it , its been a while. i know i rooted my s2 and note 2 a while back but i havent had a android in a while. thanks so much for your help , thumbs up :good:

k4krisbrah said:
thanks so much for your help. i took my s3 that had a bad lcd and put my sd in that and moved the zip file i downloaded here http://forum.xda-developers.com/showthread.php?t=2658486 then i flashed it from twrp and wiped cache and all that good stuff everything was fine after that. only question i have for you now is to root or not to root , i forget the pros and cons of it , its been a while. i know i rooted my s2 and note 2 a while back but i havent had a android in a while. thanks so much for your help , thumbs up :good:
Click to expand...
Click to collapse
Glad to know your phone is now working fine. To root or not is a choice you'll have to make depending on how much control you want over your phone. The pros are that you literally have control over your phone in terms of installing apps or making modifications to the operating system. You can install custom ROMs and/or apps that you would otherwise not be able to install. The con, of course, is security and integrity of your phone. There is always a risk that you may end up bricking your phone or creating access for malware. Rooting should, therefore, be something you do only if you have need for it.

... Just Odin stock ROM and work from there or if twrp isn't latest... Odin latest recovery and then USB files into phone using recovery and then flash... Or again just use odin to flash and then do whatever you want afterward
Sent from my d2lte using Tapatalk

[Q] P6 stuck on Logo and there is no OS

Hi Everyone,
my p6 stuck on the logo (Huawei Logo).
I already installed TWRP v2.6.3.7
When I go to TWRP, reboot into System ...it said "No OS Installed!"
how can i do it?
Please help me..
Thanks

notwo said:
Hi Everyone,
my p6 stuck on the logo (Huawei Logo).
I already installed TWRP v2.6.3.7
When I go to TWRP, reboot into System ...it said "No OS Installed!"
how can i do it?
Please help me..
Thanks
Click to expand...
Click to collapse
Try following these instructions to reintall android http://forum.xda-developers.com/showpost.php?p=54717666&postcount=8

digijedi007 said:
Try following these instructions to reintall android http://forum.xda-developers.com/showpost.php?p=54717666&postcount=8
Click to expand...
Click to collapse
Thanks for help.
if u dun mind, can u upload these to dropbox? (in my area, mediafire is blocked )
http://www.mediafire.com/download/q0..._Stock.1.4.zip
http://www.mediafire.)com/download/z...g_Version).zip
I can't revert to stock recovery .. it stuck in waiting device (cuz i think usb debugging is not on)
My room is already on B510.
I think the problem (stuck on huawei logo and there is no os) occurs bcoz I accidentally wipe all data (Dalvik Cache, System, Cache, Custom Storage, Data, Internal Storage) via TWRP.
What can I do to install OS?

download this stock recovery first
http://www.androidfilehost.com/?fid=23252070760973625
^ after you download extract and rename it's file to recovery.img
then
If you can still access your twrp try rebooting in bootloader mode then>
use your adb /fastboot on pc
fastboot flash recovery recovery.img
then follow the instructions above for how to reinstall your android os
also to download those mediafire files try using http://onlineproxyfree.com/
also in the future when using twrp never format internal or external memory..
---------- Post added at 09:18 AM ---------- Previous post was at 09:08 AM ----------
also make sure you have adb drivers loaded? try this maybe http://adbdriver.com/upload/AdbDriverInstaller.exe

digijedi007 said:
download this stock recovery first
http://www.androidfilehost.com/?fid=23252070760973625
^ after you download extract and rename it's file to recovery.img
then
If you can still access your twrp try rebooting in bootloader mode then>
use your adb /fastboot on pc
fastboot flash recovery recovery.img
then follow the instructions above for how to reinstall your android os
also to download those mediafire files try using http://onlineproxyfree.com/
also in the future when using twrp never format internal or external memory..
---------- Post added at 09:18 AM ---------- Previous post was at 09:08 AM ----------
also make sure you have adb drivers loaded? try this maybe http://adbdriver.com/upload/AdbDriverInstaller.exe
Click to expand...
Click to collapse
Hello,
Thanks again bro. but i still have problems.
in CMD, when i typed "fastboot flash recovery recovery.img", it's still in waiting for device.
For "onlineproxyfree(dot)com", it's also blocked by FortiGuard Web Filtering.
Yeah.. I won't format internal / ext again
I already installed adb drivers to my laptop.

hmm try rebooting your phone directly into fastboot> hold vol- and power continuously till it boots in fastboot>plug phone back in> then try flashing the recovery again
also make sure to replace your drivers with the ones in the software i provided the link for, also remove any huawei pc sync or whatever the name of the pc software was, it sometimes clashes with adb
maybe try using tor for downloading from mediafire.

digijedi007 said:
hmm try rebooting your phone directly into fastboot> hold vol- and power continuously till it boots in fastboot>plug phone back in> then try flashing the recovery again
also make sure to replace your drivers with the ones in the software i provided the link for, also remove any huawei pc sync or whatever the name of the pc software was, it sometimes clashes with adb
maybe try using tor for downloading from mediafire.
Click to expand...
Click to collapse
still stuck in "waiting for device"

hmm i faced that issue too once, give me a few min let me check something
---------- Post added at 10:38 AM ---------- Previous post was at 10:35 AM ----------
Can you send me a screenshot of your device manager screen? ie goto control panel>admin tools>Computer management>Device manager, also are you using adb in your cmd command or are you using fastboot? Try adb devices and see if it shows a serial number,
also maybe try replacing your adb/device/fastboot (whatever device manager is picking your phone up as) with this driver http://download.clockworkmod.com/test/UniversalAdbDriverSetup6.msi
---------- Post added at 11:12 AM ---------- Previous post was at 10:38 AM ----------
If you are still stuck maybe try reviewing steps here http://forum.xda-developers.com/ascend-p6/development/diy-rom-b510-based-add-want-t2843511

digijedi007 said:
hmm i faced that issue too once, give me a few min let me check something
---------- Post added at 10:38 AM ---------- Previous post was at 10:35 AM ----------
Can you send me a screenshot of your device manager screen? ie goto control panel>admin tools>Computer management>Device manager, also are you using adb in your cmd command or are you using fastboot? Try adb devices and see if it shows a serial number,
also maybe try replacing your adb/device/fastboot (whatever device manager is picking your phone up as) with this driver http://download.clockworkmod.com/test/UniversalAdbDriverSetup6.msi
---------- Post added at 11:12 AM ---------- Previous post was at 10:38 AM ----------
If you are still stuck maybe try reviewing steps here http://forum.xda-developers.com/ascend-p6/development/diy-rom-b510-based-add-want-t2843511
Click to expand...
Click to collapse
Thank you so much bro...
my phone now totally working
I done with twrp sideload for rom 513 from http://forum.xda-developers.com/showpost.php?p=54351633&postcount=1

What did you do differently this time ?

digijedi007 said:
What did you do differently this time ?
Click to expand...
Click to collapse
I tried different rom... mine doesn't include boot.img. just only update.app

oh ok, which do you have installed now? b513? also you can still use the mods posted on that thread to make the p6 much better

digijedi007 said:
oh ok, which do you have installed now? b513? also you can still use the mods posted on that thread to make the p6 much better
Click to expand...
Click to collapse
yeah.. B513.. thanks i now downloading tor browser to use mediafire..
Tq. I'll try them
btw, whz difference b/t 513 & 512.
need to update?

Actually not much aside from a few minor tweaks/improvements, which is why I am staying with b510 it's stable,works well,fast and it has everything i need.? Also check out the b510 link in my sig, if you want to see different root methods,and good apps.
---------- Post added at 12:24 PM ---------- Previous post was at 11:49 AM ----------
when you are finished installing the mods let me know what you think of them

digijedi007 said:
Actually not much aside from a few minor tweaks/improvements, which is why I am staying with b510 it's stable,works well,fast and it has everything i need.? Also check out the b510 link in my sig, if you want to see different root methods,and good apps.
---------- Post added at 12:24 PM ---------- Previous post was at 11:49 AM ----------
when you are finished installing the mods let me know what you think of them
Click to expand...
Click to collapse
sorry man.
I can't find any difference b/f and a/f

That is quite strange, try reflashing them, difference should be noticeable immediately.

plz help me����
I'm using huawei ascend p6 with emui 3.0 b708 with twrp recovery ...when I uninstalled xposed it told me to reboot ...I rebooted my phone but it was stuck at huawei logo .,..so I opened twrp recovery and cleared cache,delvik cage ,and system thinking it will fix my phone and then when tried to reboot it said os not installed do u want to reboot......I rebooted ....but now its stuck at huawei ascend logo ....so I researched and did exactly steps posted by digijedi007
http://forum.xda-developers.com/asce...-want-t2843511
I flashed the stock recovery but I'm having trouble installing b132 through force update it fails and the twrp recovery is gone plz help me plzplz

Sorry for the late reply, have you managed to successfully flash your device? Or are you still stuck

Good Day Everyone! I messed up with my Huawei P8 Lite ALE-L21 and now it is bricked. I installed TWRP recovery and accidentally reformatted everything without any backup. Now it got stuck at Huawei Logo and everytime I open TWRP, it says No OS installed when I reboot. Hope you can help me. Thanks in advance. :crying:

darkster24 said:
Good Day Everyone! I messed up with my Huawei P8 Lite ALE-L21 and now it is bricked. I installed TWRP recovery and accidentally reformatted everything without any backup. Now it got stuck at Huawei Logo and everytime I open TWRP, it says No OS installed when I reboot. Hope you can help me. Thanks in advance. :crying:
Click to expand...
Click to collapse
Download firmware from official website and extract it. Copy dload folder and paste it in sdcard. Now turn on your device by pressing volume up + volume down + power button. This will force install firmware in your phone.
Sent from my ALE-L21 using XDA-Developers mobile app

Tab Pro 10.1 ROM problem - tablet hung

My tablet kept locking on the SAMSUNG startup screen. Previously, I had to do a hard reset. It just happened again. Now I think the original ROM image is lost or damaged. I can do a hard reset, but upon reboot, it does not load the factory image and ask the new computer questions. I have the Wi-Fi SM-T520 and can't find a stock ROM for it.
I downloaded the GraveD ROM 3.0 zip file. But I don't know how to install it. I tried to install update from external device. I put the ZIP file on the sd card and selected the file, but that did nothing. I am very much a beginner at this.
Any advice?

GaryK2 said:
My tablet kept locking on the SAMSUNG startup screen. Previously, I had to do a hard reset. It just happened again. Now I think the original ROM image is lost or damaged. I can do a hard reset, but upon reboot, it does not load the factory image and ask the new computer questions. I have the Wi-Fi SM-T520 and can't find a stock ROM for it.
I downloaded the GraveD ROM 3.0 zip file. But I don't know how to install it. I tried to install update from external device. I put the ZIP file on the sd card and selected the file, but that did nothing. I am very much a beginner at this.
Any advice?
Click to expand...
Click to collapse
Are you on a custom ROM? Do you have a custom recovery?
- If yes, just download CM12.1 for picassowifi from here: http://cyanogenmod.altervista.org/ and flash it (and gapps ARM-5.1) and enjoy!
If you are pure stock in all respects:
https://forum.xda-developers.com/ga...-how-to-root-install-custom-recovery-t3087451

shikhanshu said:
Are you on a custom ROM? Do you have a custom recovery?
- If yes, just download CM12.1 for picassowifi from here: http://cyanogenmod.altervista.org/ and flash it (and gapps ARM-5.1) and enjoy!
If you are pure stock in all respects:
https://forum.xda-developers.com/ga...-how-to-root-install-custom-recovery-t3087451
Click to expand...
Click to collapse
I am running a stock ROM. I assume that I have to root the device first. I downloaded USB_Drivers_1.6.27.0.exe. Win10 will not let me run it "This publisher has been blocked from running software on your machine.". I did some searches and cannot get it to run.
I also tried skipping this step and tried running CF-Auto-Root-picassowifi-picassowifixx-smt520.tar.md5 from the sd card using external option and I get a signature error.
If I use Odin3-v3.10.6.exe, the program "sees" the usb in ID:COM. However after a long wait it reports Fail.
I also tried installing GraveD_V3.0 for the sd card and got the same signature error.
I am close to giving up!

Saw a link to fix the win10 error. Tried it?
https://www.technipages.com/windows-10-fix-this-publisher-has-been-blocked-from-running-software
Also see if you can install win7 in virtualbox and use that.
I remember having a hard time finding the right drivers myself for the download mode. But once i was able to get twrp installed on it, i am free
---------- Post added at 07:46 AM ---------- Previous post was at 07:29 AM ----------
Before anything else, please download the three things you need to resurrect your tablet. With Cyanogenmod download servers gone, there's no telling when (and if) you might be able to find another mirror. I was lucky enough to find one myself by intense googling
CM12.1 final nightly (the BEST ROM) for SM-T520
https://archive.org/download/cmarchive_nighlies/cm-12.1-20161016-NIGHTLY-picassowifi.zip
OpenGapps.org -> ARM, 5.1, pico (or whichever variant you want)
TWRP custom recovery for SM-T520 - Download link and instructions available here:
https://twrp.me/devices/samsunggalaxytabpro101exynoswifi.html
You don't need root to put TWRP, do it through bootloader (you need Odin and drivers for it at the minimum). Follow instructions very precisely under the section "Odin Install Method (No Root Required)"
I really hope you can bring back the tab to life and get CM12.1 on it. I can feel your pain as I went through the same
---------- Post added at 07:48 AM ---------- Previous post was at 07:46 AM ----------
Also found this (says works with Win10):
http://www.odindrivers.net/
Remove all previously installed Samsung drivers and/or Odin tool before installing from here.
---------- Post added at 07:53 AM ---------- Previous post was at 07:48 AM ----------
LOL, one more thing. Be sure to copy the CM12.1 zip and opengapps zip to your internal storage (or SD card) first. So that by the time you are able to install TWRP successfully and can get inside it, you already have everything you need.
Once in TWRP, do an advanced wipe, wipe out cache/dalvik/system/data (NOT internal storage and SD card). Then "Install" and choose the CM12.1 zip FIRST, then "add more zips", choose opengapps zip second; then flash zips; reboot.

hello
i think if you have a problem with a recovery you must install an other recover
cfautoroot is ok for that
before copy a rom zip on an sd card
then install cfautoroot with odin the tablet will boots on cmw recovery
then install a new rom and a new recovery
in cfautoroot you have drivers and recovery
don't use drivers from kies or smart switch
regards

validatus said:
hello
i think if you have a problem with a recovery you must install an other recover
cfautoroot is ok for that
before copy a rom zip on an sd card
then install cfautoroot with odin the tablet will boots on cmw recovery
then install a new rom and a new recovery
in cfautoroot you have drivers and recovery
don't use drivers from kies or smart switch
regards
Click to expand...
Click to collapse
Where do I get cfautoroot?

//SM-G928P\\ **Stock Nougat odin Firmware G928PVPU3DQC5**

Here is stock nougat odin ... you can update or just go back to stock ... enjoy!
AP_G928PVPU3DQC5_CL10809541_QB12864192_REV00_user_low_ship_meta.tar.md5
BL_G928PVPU3DQC5_CL10809541_QB12864192_REV00_user_low_ship.tar.md5
CP_G928PVPU3DQC5_CP5984293_CL10809541_QB12864192_REV00_user_low_ship.tar.md5
CSC_SPT_G928PSPT3DQC5_CL10809541_QB12864192_REV00_user_low_ship.tar.md5
ZENLTE_USA_SPR.pit
https://www.androidfilehost.com/?fid=673368273298945585

Galaxy SM G928P
How do I update my phone with this stock recovery?
Which of these tar.md5 files do I flash with Odin, or do I flash the zip file with TWRP?
My phone is rooted.
Help,,,,,
Thanks
---------- Post added at 09:51 PM ---------- Previous post was at 09:40 PM ----------
How do I update my phone with this stock recovery?
Which of these tar.md5 files do I flash with Odin, or do I flash the zip file with TWRP?
My phone is rooted.
Help,,,,,
New to forum
Thanks

Mulzac said:
How do I update my phone with this stock recovery?
Which of these tar.md5 files do I flash with Odin, or do I flash the zip file with TWRP?
My phone is rooted.
Help,,,,,
Thanks
---------- Post added at 09:51 PM ---------- Previous post was at 09:40 PM ----------
How do I update my phone with this stock recovery?
Which of these tar.md5 files do I flash with Odin, or do I flash the zip file with TWRP?
My phone is rooted.
Help,,,,,
New to forum
Thanks
Click to expand...
Click to collapse
Use Odin with the appropriate files in the specified boxes (i.e. in the AP box select the AP, the BL box the BL... and then don't forget the .pit file which is a few tabs over). Also make sure you have developer options enabled and OEM UNLOCK on. And a huuuuuge thanks to the op!!!!

SM-G928P
Ok,
I'll update with Odin later.
BTW, how do I reroot on this new Nougat update?
I previously used CF-Auto Root zenltespr-smg928p.tar.md5
Thanks.

JUSMEJOSE said:
Here is stock nougat odin ... you can update or just go back to stock ... enjoy!
AP_G928PVPU3DQC5_CL10809541_QB12864192_REV00_user_low_ship_meta.tar.md5
BL_G928PVPU3DQC5_CL10809541_QB12864192_REV00_user_low_ship.tar.md5
CP_G928PVPU3DQC5_CP5984293_CL10809541_QB12864192_REV00_user_low_ship.tar.md5
CSC_SPT_G928PSPT3DQC5_CL10809541_QB12864192_REV00_user_low_ship.tar.md5
ZENLTE_USA_SPR.pit
i used odin 3 v3.10 flash my phone, but it's fail in process load Userdata of file AP_G928PVPU3DQC5_CL10809541_QB12864192_REV00_user_low_ship_meta.tar.
Now, i can't update my phone. Help me, please !!!!
Click to expand...
Click to collapse

Can we keep root? Or is there a root method yet?

Galaxy SM G928P
Nguyenloc said:
JUSMEJOSE said:
Here is stock nougat odin ... you can update or just go back to stock ... enjoy!
AP_G928PVPU3DQC5_CL10809541_QB12864192_REV00_user_low_ship_meta.tar.md5
BL_G928PVPU3DQC5_CL10809541_QB12864192_REV00_user_low_ship.tar.md5
CP_G928PVPU3DQC5_CP5984293_CL10809541_QB12864192_REV00_user_low_ship.tar.md5
CSC_SPT_G928PSPT3DQC5_CL10809541_QB12864192_REV00_user_low_ship.tar.md5
ZENLTE_USA_SPR.pit
i used odin 3 v3.10 flash my phone, but it's fail in process load Userdata of file AP_G928PVPU3DQC5_CL10809541_QB12864192_REV00_user_low_ship_meta.tar.
Now, i can't update my phone. Help me, please !!!!
Click to expand...
Click to collapse
Had same problem... what I did was updated to G928PVPS3BQB1 from Sam mobile, then checked for updates and received OTA
Nougat 7.0 (G928PVPU3DQC5) working perfectly.
Not sure if I can root on this new firmware.
Click to expand...
Click to collapse

I tried multiple versions of odin to flash the G928PVPU3DQC5 zip, yet it would always hang on user data in odin at 90-95% complete. Not to say it doesn't work for anyone. What I did was I used the G928PVPS3BQB1 in odin and updated to U3DQC5 through the system update. Now I was able to install TWRP and root how I will explain, you have to have OEM unlock and USB debugging on in developer options. To unlock the developer settings you go to settings, about phone, build number and touch it several times. Make sure you have Magisk-v12.0 in your sd card. Now in odin flash the twrp-3.1.0-0-zenltespr.img.tar make sure auto reboot is unchecked in odin. To reboot simply hold the volume down button, home button, power button. When the screen goes black "quickly" hold the volume up button, home button, power button in twrp flash the Magisk-v12.0 zip and FYI the debloat.zip did work as well. Hope this helps!

umm... Does anyone else have 64gb device? I did a full wipe before flashing but now it says I only have 16gb and half of that is system. Wow this is bad. I was hoping to start frsh and get my space back but now I have way less than when I started

jmckeejr said:
umm... Does anyone else have 64gb device? I did a full wipe before flashing but now it says I only have 16gb and half of that is system. Wow this is bad. I was hoping to start frsh and get my space back but now I have way less than when I started
Click to expand...
Click to collapse
Try a factory reset in recovery, wipe cache, wipe system.

Yuwei01 said:
I tried multiple versions of odin to flash the G928PVPU3DQC5 zip, yet it would always hang on user data in odin at 90-95% complete. Not to say it doesn't work for anyone. What I did was I used the G928PVPS3BQB1 in odin and updated to U3DQC5 through the system update. Now I was able to install TWRP and root how I will explain, you have to have OEM unlock and USB debugging on in developer options. To unlock the developer settings you go to settings, about phone, build number and touch it several times. Make sure you have Magisk-v12.0 in your sd card. Now in odin flash the twrp-3.1.0-0-zenltespr.img.tar make sure auto reboot is unchecked in odin. To reboot simply hold the volume down button, home button, power button. When the screen goes black "quickly" hold the volume up button, home button, power button in twrp flash the Magisk-v12.0 zip and FYI the debloat.zip did work as well. Hope this helps!
Click to expand...
Click to collapse
link for the debloat.zip
Thanks

soccer_rm said:
link for the debloat.zip
Thanks
Click to expand...
Click to collapse
Go to the Note 5 Android Development, the zips in the post of tdunham's deodexed stock rom.

Sim problem after Update
Hello guys help me. I updated it but now my sim not working in mobile. What should I gonna do now. Please help.

why is this 2.2gb download but the same thing from sammobile 1.9 gb

will someone help me stop the hourly going on daily and help me find the G928PVPS3BQB1