Develop Bugs

[Q] One X - can´t update to JB. All ICS works.

Hello,
Here´s the problem.
I have here a HTC One X, engineer model. (fully factory unlocked)
The problem is that he has 2.17.401.2 and works OK. But can´t upgrade to any version above.
As he came:
Bootloader Unlocked
Model : ENDEAVORU XC Ship S-Off RH
CID : HTC__001
Hboot - 1.12.0000
CPLD - None
MICROP - None
Radio -
eMMC-bootmode : disabled
CPU-bootmode : disabled
HW Secure boot : disabled
Modem PATH : Off
Tried to update by RUU to 3.14.401.31 (I believe it´s the latest official), but an error came along about image error.
So I manually, updated the HBoot to 1.39.0000, and the RUU update now get´s complete, but the phone restart few seconds after power on. And recovery get´s the same restart cycle.
So, I update to RUU 2.17.401.2 and everything works again.
Changed the CID to 1111111 (supercid)
Flashed again the 3.14 and now he is at this point:
Code:
C:\Fastboot>fastboot getvar all
INFOversion: 0.5a
INFOversion-bootloader: 1.39.0000
INFOversion-baseband: 5.1204.162.29
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.14.401.31
INFOserialno: HT21LWxxxxx
INFOimei: 35918xxxxxxxx
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ461****
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 3873mV
INFOdevpower: 60
INFOpartition-layout: None
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
all: Done!
Code:
C:\Fastboot>fastboot getvar version-main
version-main: 2.17.401.2
But at any time, I can downgrade to 2.17 or 1.29 and make it work.
BTW, I also tried other methods... when on 2.17, tried to update by CWM with zip file. Relocked the bootloader, unlocked it again... Tried to restore a nandroid backup from a 3.14.** working unit... but all ended in a restart loop. So always came back to 2.17 and get it working.
I think the problem in this unit remains here:
Code:
INFOmodelid: PJ461****
Should be PJ46100... or PJ4610000
If I try to write it on fastboot
Code:
fastboot oem writemid PJ46100
Command error !!!
Not sure if write model ID is supported on this unit.
Any way of writting the model id? or solve the main issue of not updating to 3.14?
Thank you

The model id was fine, what is the name of the files are you trying to flash and what command you used ?

Vcek said:
The model id was fine, what is the name of the files are you trying to flash and what command you used ?
Click to expand...
Click to collapse
Tried a bunch... RUU 3.14.401.27 / 3.14.401.31, tried install zip by cwm (ROM_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.31.zip), tried a nandroid backup form a 3.14.401.31 working unit...
Also tried ota update (OTA_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.27-2.17.401.2_release_298985n1wwcwzs385c0bvz.zip) by adb... but no sucess.
fastboot oem rebootRUU
fastboot flash zip (ota_file).zip
Came an error saying it android-info.txt file was not found
I´m running out of options...
Thanks

I´m kind in a dead end...
Phone works on all ICS, but if update hboot, and install JB, reboot loop... always, no matter what I do.

Drug_Store said:
I´m kind in a dead end...
Phone works on all ICS, but if update hboot, and install JB, reboot loop... always, no matter what I do.
Click to expand...
Click to collapse
Try twrp to install the rom, or cwm 5.8.4.0
Sent from my HTC One X using xda app-developers app

Vcek said:
Try twrp to install the rom, or cwm 5.8.4.0
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Tried CMW to install zip... flashed, but same result... reboot loop.
Tried to restore a twrp backup from 3.14.401.31, but always end up like this.

why dont you just go back to stock and update through OTA?

robchongke said:
why dont you just go back to stock and update through OTA?
Click to expand...
Click to collapse
If I go back to 2.17, there´s no OTA notify of newer update.
Only if I go to 1.29, then I receive 2.17 OTA notify, install it... but after that no more ota notify.

I am not sure for engineer version, but did you try to do steps like for "normal" One x when you do RUU flash! Need to lock bootloader and in win based systems with administrator control run RUU as administrator, and with phone in fastoboot mode.. I know that's you phone have unlock bootloader and S-Off but try..
And for use of nandroid backup that you mention did you try after flashing backup flash boot.img also..
link to firmware for your CID : http://forum.xda-developers.com/showthread.php?t=1957376, and link for CID match software:http://forum.xda-developers.com/showthread.php?t=2189048

Mis-read, delete please.

hpnxfox said:
I am not sure for engineer version, but did you try to do steps like for "normal" One x when you do RUU flash! Need to lock bootloader and in win based systems with administrator control run RUU as administrator, and with phone in fastoboot mode.. I know that's you phone have unlock bootloader and S-Off but try..
And for use of nandroid backup that you mention did you try after flashing backup flash boot.img also..
link to firmware for your CID : http://forum.xda-developers.com/showthread.php?t=1957376, and link for CID match software:http://forum.xda-developers.com/showthread.php?t=2189048
Click to expand...
Click to collapse
Already tried to flash RUU as Admin, and bootloader locked. But ended up the same... reboot loop.
Can´t recall for sure about flashing boot.img after nandroid backup, but will retry.
Thank you

Same Problem
Drug_Store said:
Already tried to flash RUU as Admin, and bootloader locked. But ended up the same... reboot loop.
Can´t recall for sure about flashing boot.img after nandroid backup, but will retry.
Thank you
Click to expand...
Click to collapse
Hi Drug_Store,
I have same problem. not able to upgrade to JB.
hboot 1.12. Super CID. S-Off. Ver: 2.17.401.2.
Tried all possible things. still no use., boot loop.
Are you able to flash any JB rom apart from RD-MIUI?
http://forum.xda-developers.com/showthread.php?t=1817633

Super CID, not able to upgrade to JB
mods, any inputs on the above?

Having the same issue
I'm having the same issue.
My phone is currently at RUU_ENDEAVOR_U_ICS_40_S_HTC_Europe_2.17.401.2_Radio_2.1204.135.20_release_274900
but if I try to update it with RUU_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.31_R_Radio_5.1204.162.29_release_302015_signed
OTA will download the file fine and wipe the phone, then in the recovery menu (stock) it will reboot after 10 seconds of "installing".
All other RUU's or manual flashes fail and end up in a boot loop.

try to set another CID which is for exmaple from WWE so that it will download for sure the update...maybe it's due to supercid

Didnt work
One-X-master said:
try to set another CID which is for exmaple from WWE so that it will download for sure the update...maybe it's due to supercid
Click to expand...
Click to collapse
Changed cid to HTC__001 & checked with bootloader locked & unlocked. no update available.

vnayrox said:
Changed cid to HTC__001 & checked with bootloader locked & unlocked. no update available.
Click to expand...
Click to collapse
Try factory reset the phone with cid at HTC_001 and try update again

wigankev said:
Try factory reset the phone with cid at HTC_001 and try update again
Click to expand...
Click to collapse
Yup try that should work ...I just deleted cache and data in all Google things and HTC update thing restarted phone and searched again for and found one...and factory reset should work really, too...
Gesendet von meinem HTC One X mit Tapatalk 2

One-X-master said:
Yup try that should work ...I just deleted cache and data in all Google things and HTC update thing restarted phone and searched again for and found one...and factory reset should work really, too...
Gesendet von meinem HTC One X mit Tapatalk 2
Click to expand...
Click to collapse
Did factory reset via recovery with cid HTC__001, found no updates

vnayrox said:
Did factory reset via recovery with cid HTC__001, found no updates
Click to expand...
Click to collapse
As long as your on the right Hboot you should be ok flashing ARHD or any other Jelly Bean custom rom of your choice.

HOX Hboot 0.94.0/main version 1.28.161.9 no JB?

Hi guys,
I got a HOX with CID VODAP102.
Using HBOOT 0.94.0000 and main version 1.28.161.9
Radio uknown ('none' says bootloader)
I want to update to JB, specifically CM10.1.
But i need to update my HBOOT, though can't seem to figure out how with my CID...
How would i go about this? The threads i found are either inconclusive or with different versions.
Oh yeah, this didn't work because of the CID thing:
http://forum.xda-developers.com/showthread.php?t=1924003
edit; just noticed, i already did the fastboot flash boot boot.img. So now i have a boot.img with an older version of the CM software. Which appearantly does not boot.
Thanks, Ice

are you rooted and unlocked?

matt95 said:
are you rooted and unlocked?
Click to expand...
Click to collapse
Rooted and unlocked. Been running CM10 for a while (beta's).
Device is still S-on though; but thats for all HOX's i think?

yeah, however to update your HBOOT you need to download the right firmware package for your CID here
Code:
# adb reboot bootloader
# fastboot oem lock
# fastboot oem rebootRUU
# fastboot flash zip firmware.zip
# fastboot reboot
now you need to unlock it again and flash a custom recovery... and that's it, flash whatever you want now

well that did it! at least; the phone boots again.
rebooted to bootloader and that now says hboot 1.36 which probably means i can update to 10.1.
just to be sure; i need to install CWM again, copy the boot.img and flash cm10.1?
ill try that tonight. just glad i can be reached again.. need the phone for work
Thanks!
edit; oh and unlock the bootloader again. Or is that not necessary since i should already have root access?

IceDustbin said:
well that did it! at least; the phone boots again.
rebooted to bootloader and that now says hboot 1.36 which probably means i can update to 10.1.
just to be sure; i need to install CWM again, copy the boot.img and flash cm10.1?
ill try that tonight. just glad i can be reached again.. need the phone for work
Thanks!
edit; oh and unlock the bootloader again. Or is that not necessary since i should already have root access?
Click to expand...
Click to collapse
you need to unlock the bootloader again, flash again the recovery through fastboot, full-wipe, flash the new rom nd its boot.img and that's it

Hi guys,
I have a kind of same problem but bigger, it means that I don't know how to root bcuz my phone is second hand.
My software is:
Android Revolution HD 7.1.0 by mike1986
HTC Sense 4.0
Android version 4.0.4
Additional Info:
ENDEAVORU PVT SHIP S-ON RL
HBOOT - 0.94.0000
RADIO - 1.1204.103.14
CID - VODAP304
Versión Firmware o Bootloader: 1.28.161.9
Could someone tell me how I should do to get HTC Sense 5? I'd prefer the original firmware, but I don't mind having a root one neither.
Thanks

adr.lahoz said:
Hi guys,
I have a kind of same problem but bigger, it means that I don't know how to root bcuz my phone is second hand.
My software is:
Android Revolution HD 7.1.0 by mike1986
HTC Sense 4.0
Android version 4.0.4
Additional Info:
ENDEAVORU PVT SHIP S-ON RL
HBOOT - 0.94.0000
RADIO - 1.1204.103.14
CID - VODAP304
Versión Firmware o Bootloader: 1.28.161.9
Could someone tell me how I should do to get HTC Sense 5? I'd prefer the original firmware, but I don't mind having a root one neither.
Thanks
Click to expand...
Click to collapse
you have a custom rom so you are already rooted. follow the instructions in post 4 above or go to this thread>>>>>http://forum.xda-developers.com/showthread.php?t=1975140 and go back to stock and your phone will update to the latest version

nogotaclue said:
you have a custom rom so you are already rooted. follow the instructions in post 4 above or go to this thread>>>>>http://forum.xda-developers.com/showthread.php?t=1975140 and go back to stock and your phone will update to the latest version
Click to expand...
Click to collapse
Thanks nogotaclue,
I will opt for go back to stock. Just I have two questions.
1. Which recovery.img should I choose? 1.26-1.29?
2. What do I have to be on mind to choose the Nandroid Stock? I have found these three on another website, and I don't know if there is any difference, basically the features in bold are what I don't understand!
- Nandroid Rom Vodafone España VODAP304
- Nandroid Rom Vodafone España 1.29 VODAP304
- Nandroid Rom Vodafone España VODAP304 [version firmware 2.17, banda base 2.1204, hboot 1.12 ROOT]
Thanks

adr.lahoz said:
Thanks nogotaclue,
I will opt for go back to stock. Just I have two questions.
1. Which recovery.img should I choose? 1.26-1.29?
2. What do I have to be on mind to choose the Nandroid Stock? I have found these three on another website, and I don't know if there is any difference, basically the features in bold are what I don't understand!
- Nandroid Rom Vodafone España VODAP304
- Nandroid Rom Vodafone España 1.29 VODAP304
- Nandroid Rom Vodafone España VODAP304 [version firmware 2.17, banda base 2.1204, hboot 1.12 ROOT]
Thanks
Click to expand...
Click to collapse
dont use any of those, you're best option is to go completely stock by using an ruu from the link I will post at the end for you. when you go to the page the ruu that you want is the 7th from the bottom, it will be version 1.28.161.9 and should be 609MB. start downloading it then there are some other things that you need to do in the meantime>>>>>http://www.androidruu.com/?developer=Endeavor make sure it matches exactly the version I have stated

htc one m8 ( htc_017) won't update OTA !?

hello guys
i need help my phone m8 won't update ota to 4.4.4 or 4.4.3 m still on 4.4.2
my cid is htc_017 , model id 0P6B10000
no root . no s-off , no unlock
and i want ask if this cid htc_017 for EMEA or US ?
ty

P.R.F.S said:
hello guys
i need help my phone m8 won't update ota to 4.4.4 or 4.4.3 m still on 4.4.2 :crying:
my cid is htc_017 , model id 0P6B10000
no root . no s-off , no unlock
and i want ask if this cid htc_017 for EMEA or US ?
ty
Click to expand...
Click to collapse
near as I can tell your one is from Cinncinati Bell and you'll probably never see an update. It's similar to a T-mobile One if memory serves me right. Anyway you'll need S-OFF to convert your phone to DE or international if you want to receive updates

clsA said:
near as I can tell your one is from Cinncinati Bell and you'll probably never see an update. It's similar to a T-mobile One if memory serves me right. Anyway you'll need S-OFF to convert your phone to DE or international if you want to receive updates
Click to expand...
Click to collapse
is that mean my phone not international ver ?
and can i install rom.zip without s-off like htc m7 or have to on s-off ?

Basically if you want 4.4.4 you will have to unlock s-off convert to a different firmware

P.R.F.S said:
is that mean my phone not international ver ?
and can i install rom.zip without s-off like htc m7 or have to on s-off ?
Click to expand...
Click to collapse
you can flash roms without s-off, but some roms are going to need firmware that's up to date. Your phone will not get that up to date firmware unless you get s-off and do the developer edition conversion ( change CID and MID and flash DE RUU)
As Far as your phone being international it really should not matter as long as it's working on the carrier you use, it is a LTE compatable M8_UL

clsA said:
you can flash roms without s-off, but some roms are going to need firmware that's up to date. Your phone will not get that up to date firmware unless you get s-off and do the developer edition conversion ( change CID and MID and flash DE RUU)
As Far as your phone being international it really should not matter as long as it's working on the carrier you use, it is a LTE compatable M8_UL
Click to expand...
Click to collapse
ok thank u , last question can i install cwm and root files for international ver on my phone or that isn't compatible ?

P.R.F.S said:
ok thank u , last question can i install cwm and root files for international ver on my phone or that isn't compatible ?
Click to expand...
Click to collapse
Yes you can use TWRP and flash GSM Roms

clsA said:
and flash GSM Roms
Click to expand...
Click to collapse
is this rom :
http://www.androidrevolution.org/downloader/download.php?file=One_M8_3.28.401.7_deodexed.zip
compatible with my phone cid is htc_017 , model id 0P6B10000 ?
thank you :good:

P.R.F.S said:
is this rom :
http://www.androidrevolution.org/downloader/download.php?file=One_M8_3.28.401.7_deodexed.zip
compatible with my phone cid is htc_017 , model id 0P6B10000 ?
Click to expand...
Click to collapse
You need to s-off and update firmware to run that ROM, otherwise you will have some serious issues including long (like 5-10 minute) boot times and broken WiFi.
Same is going to happen if you try to run any 4.4.3 Sense based custom ROMs coming from 4.4.2.
Just search and read if want more info on firmware. This has been discussed probably dozens of times on other threads.

clsA said:
Yes you can use TWRP and flash GSM Roms
Click to expand...
Click to collapse
redpoint73 said:
You need to s-off and update firmware to run that ROM, otherwise you will have some serious issues including long (like 5-10 minute) boot times and broken WiFi.
Same is going to happen if you try to run any 4.4.3 Sense based custom ROMs coming from 4.4.2.
Just search and read if want more info on firmware. This has been discussed probably dozens of times on other threads.
Click to expand...
Click to collapse
ok now i am on s-off what is next step? install firmware or GSM Roms ? and where i can find it ?
( cid htc_017 , mid 0P6B10000 )
thank u

P.R.F.S said:
ok now i am on s-off what is next step? install firmware or GSM Roms ? and where i can find it ?
( cid htc_017 , mid 0P6B10000 )
thank u
Click to expand...
Click to collapse
Do you still want to convert the phone to Developer Edition ?
If you want to just use the international firmware their here > http://xda7.androidrevolution.org/db_mirror/Firmware/index.php?dir=HTC/HTC_One_M8/401/
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot flash zip firmware.zip
fastboot reboot
If your looking to convert, you change your CID to BS_US002
and MID to 06PB12000 >> http://forum.xda-developers.com/showthread.php?t=2708581
and then use the RUU here >> http://forum.xda-developers.com/htc-one-m8/development/ruu-developer-edition-3-28-1540-5-t2918749
fastboot oem writecid BS_US002

clsA said:
Do you still want to convert the phone to Developer Edition ?
If you want to just use the international firmware their here > http://xda7.androidrevolution.org/db_mirror/Firmware/index.php?dir=HTC/HTC_One_M8/401/
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot flash zip firmware.zip
fastboot reboot
If your looking to convert, you change your CID to BS_US002
and MID to 06PB12000 >> http://forum.xda-developers.com/showthread.php?t=2708581
and then use the RUU here >> http://forum.xda-developers.com/htc-one-m8/development/ruu-developer-edition-3-28-1540-5-t2918749
fastboot oem writecid BS_US002
Click to expand...
Click to collapse
thank you for this help , but all i need update to 4.4.4 by easiest step! no need to change or convert anything if that not necessary?
thank you again

P.R.F.S said:
ok now i am on s-off what is next step? install firmware or GSM Roms ? and where i can find it ?
( cid htc_017 , mid 0P6B10000 )
thank u
Click to expand...
Click to collapse
Just look in the Development forum section for the threads regarding firmware. You can flash after the fact (after ROM is already installed). But I normally recommend to backup any important data before flashing just about anything "just in case".

redpoint73 said:
Just look in the Development forum section for the threads regarding firmware. You can flash after the fact (after ROM is already installed). But I normally recommend to backup any important data before flashing just about anything "just in case".
Click to expand...
Click to collapse
so can i install this firmware 3.28.401.7.zip ? and need to re-lock bootloader before install firmware or not necessary?
thx

P.R.F.S said:
so can i install this firmware 3.28.401.7.zip ? and need to re-lock bootloader before install firmware or not necessary?
thx
Click to expand...
Click to collapse
Relocking bootloader is not required or suggested.
I'm not sure which firmware goes with your CID. You'll need to research yourself, unless somebody who knows chimes in.
As long as you have a GSM M8, the firmware should be fine. But you may or may not experience some minor network issues, if the firmware is not intended for your carrier.

P.R.F.S said:
so can i install this firmware 3.28.401.7.zip ? and need to re-lock bootloader before install firmware or not necessary?
thx
Click to expand...
Click to collapse
Yes but your s-off go ahead and do the conversion it's very easy
If you want to use the .401 versions just use the CID HTC__001 and MID 0P6B10000
with the instructions i posted above

[Q] how to update to least lollipop

hi all
my friend tried to update his phone, and all he's got is:
the phone can't boot into recovery. stuck on "entering recovery"
insert coin rom (v 3.0.8) works fine, except the play store!
i tried to flash a new recovery with no success. finally i flash a twrp by captain throwback version 2.8.0.6, and wow it works!
now, i'm wanna to update his M8 to least android version.
fastboot getvar all:
m8_ul
s-on
CID: HTC__K18
MID: 0P6B10000
HBOOT: 3.16.0.0000
version main: empty
settings >> about >> software information:
android version 4.4.2
sense 6.0
InsertCoin version 3.0.8
build number 1.54.401.10
can i simply flash 4.16.401.10 firmware.zip, least TWRP version, ARHD 34.0 (don't worry i don't forget the boot.img )
or
it's better to return to stock and perform software updates?
by the way,
the build number in settings, is the current firmware.zip that installed? or the firmware that the rom based on??
thank's

i read somewhere that its safer to flash firmwares in row, start at 1.54.401.10 then the others in the x.xx.401.xx line
you can also try simply to flash the latest RUU. maybe you get some wifi errors.
i was on 3.xx.401 firmware and installed the 4.x DEV RUU without any errors
yeah the build number in settings shows the rom base.

ok, thanks
erislav said:
yeah the build number in settings shows the rom base.
Click to expand...
Click to collapse
so, i cannot know the exact firmware he has..
i'm asked that because the safest way to update is going back to stock. i found only 1.54.401.5 NAND Backups.
i'm afraid to flash the wrong nand backup..
how can i know which firmware he has?

http://forum.xda-developers.com/showthread.php?t=2701376
If you want to go the save way Try the 1.54.401.x RUU.exe from the thread. Then you should be fine to apply the otas
Dont be to afraid from flashing wrong files in most cases your phone wont get bricked it just dont boot up

erislav said:
http://forum.xda-developers.com/showthread.php?t=2701376
If you want to go the save way Try the 1.54.401.x RUU.exe from the thread. Then you should be fine to apply the otas
Dont be to afraid from flashing wrong files in most cases your phone wont get bricked it just dont boot up
Click to expand...
Click to collapse
sorry about all of my questions but, i found there only 1.54.1540.10 RUU EXE
not 401 ..

TUR_G7 said:
hi all
my friend tried to update his phone, and all he's got is:
the phone can't boot into recovery. stuck on "entering recovery"
insert coin rom (v 3.0.8) works fine, except the play store!
i tried to flash a new recovery with no success. finally i flash a twrp by captain throwback version 2.8.0.6, and wow it works!
now, i'm wanna to update his M8 to least android version.
fastboot getvar all:
m8_ul
s-on
CID: HTC__K18
MID: 0P6B10000
HBOOT: 3.16.0.0000
version main: empty
settings >> about >> software information:
android version 4.4.2
sense 6.0
InsertCoin version 3.0.8
build number 1.54.401.10
can i simply flash 4.16.401.10 firmware.zip, least TWRP version, ARHD 34.0 (don't worry i don't forget the boot.img )
or
it's better to return to stock and perform software updates?
by the way,
the build number in settings, is the current firmware.zip that installed? or the firmware that the rom based on??
thank's
Click to expand...
Click to collapse
Version main is empty because of the older recovery. Try to flash TWRP 2.8.4.0 again.
You can't flash the firmware zip without being S-Off. Sunshine is the only way to do it now, and it costs $25 (totally worth it). Or you could return to stock and take the OTAs. (stock ROM and recovery plus unmodified system partition)
The build number in settings is in fact the ROM base, and not the current firmware version.

xunholyx said:
Version main is empty because of the older recovery. Try to flash TWRP 2.8.4.0 again.
You can't flash the firmware zip without being S-Off. Sunshine is the only way to do it now, and it costs $25 (totally worth it). Or you could return to stock and take the OTAs. (stock ROM and recovery plus unmodified system partition)
The build number in settings is in fact the ROM base, and not the current firmware version.
Click to expand...
Click to collapse
first thanks for your help!
i will try this tomorrow .
on my m8 I bought sunshine (totally worth it) agree
but before i have s-off i'm flashed new firmware.zip (you have to relock your bootloader)
s-off lets you to flash firmware.zip without Signature and without relock
look at this http://forum.xda-developers.com/showthread.php?t=2696282

TUR_G7 said:
first thanks for your help!
i will try this tomorrow .
on my m8 I bought sunshine (totally worth it) agree
but before i have s-off i'm flashed new firmware.zip (you have to relock your bootloader)
s-off lets you to flash firmware.zip without Signature and without relock
look at this http://forum.xda-developers.com/showthread.php?t=2696282
Click to expand...
Click to collapse
Another part of the problem is that HTC updates incrementally. You can't just leap frog from 4.4.2 to 5.0.1.
Once you get S-Off, you can flash a firmware zip from this thread. @Sneakyghost makes his firmware packages so that you don't have to flash each update one at a time. You can just jump to the newest.
But.....from the readout on the earlier post, it is WWE and there is an RUU for that. It is signed, so it should work. It will only get you to 4.4.4. (3.28.401.9 is the newest on this thread). You could try to flash the Lolly firmware after you have updated to this.

[Q] HTC One X Stuck at Boot Loop. Need RUU!!!!

HTC One X stuck at boot loop after installing custom ROM.
CID: BSTAR301
Hboot: 1.12
How to fix it? I don't have any backup of stock ROM which was working fine on it. Please help me to get Stock ROM for this device. I've spent hours but I'm not able to find RUU for BSTAR301 CID. Anyone please give me RUU for this device.!!!

hamza_0o7 said:
HTC One X stuck at boot loop after installing custom ROM.
CID: BSTAR301
Hboot: 1.12
How to fix it? I don't have any backup of stock ROM which was working fine on it. Please help me to get Stock ROM for this device. I've spent hours but I'm not able to find RUU for BSTAR301 CID. Anyone please give me RUU for this device.!!!
Click to expand...
Click to collapse
give the result from command fastboot getvar version-main

Thant said:
give the result from command fastboot getvar version-main
Click to expand...
Click to collapse
Version Main: 2.17.513.2

hamza_0o7 said:
Version Main: 2.17.513.2
Click to expand...
Click to collapse
NOw you must to find nandroid backup with this numbers or read this thread for your CID

Thant said:
NOw you must to find nandroid backup with this numbers or read this thread for your CID
Click to expand...
Click to collapse
How I can use Nandroid backup to make my phone working again?

hamza_0o7 said:
How I can use Nandroid backup to make my phone working again?
Click to expand...
Click to collapse
unlock bootloader, flash custom recovery. restore nandroid backup, flash stock recovery and then update you have update to 1.39 hboot

Thant said:
unlock bootloader, flash custom recovery. restore nandroid backup, flash stock recovery and then update you have update to 1.39 hboot
Click to expand...
Click to collapse
I've figured out the problem! (Y)
1. Installed Twrp Recovery
2.Mounted SD Card
3.Placed Cyanogen 9 ICS ROM in SDcard
4.Installed Cyanogen from recovey
Now how I can update my Hboot version from 1.12 to 1.29 or above? As I'm not able to find Jellybean RUU for my CID (Bstar301 SPAIN).

hamza_0o7 said:
I've figured out the problem! (Y)
1. Installed Twrp Recovery
2.Mounted SD Card
3.Placed Cyanogen 9 ICS ROM in SDcard
4.Installed Cyanogen from recovey
Now how I can update my Hboot version from 1.12 to 1.29 or above? As I'm not able to find Jellybean RUU for my CID (Bstar301 SPAIN).
Click to expand...
Click to collapse
Are you read the thread where I give you there have link to some spanish forum with explanation I don't speak spahish but I see most of the comand to flash manualy hboot and I see it is for hboot 1.39 or 1.31 I don't remember good the numbers