FYI I've noticed that if I put the watch in Airplane mode it's possible to let the screen off while charging. (Enabled in developers mode) Yesterday I did it and the screen shows charging indicator for a few seconds and then it goes off.
I don't know about this screen off stuff.
One time I put in on charger and screen stays ON,
One time in goes OFF.
One time it goes OFF and I wake up, look at the watch and the screen is LIT but black. (LCD is ON, but nothing is showing.)
I can say just one think, If it is black or low light in the room, than 90% screen stays ON.
If the light is high in the middle of the day, or I have lights ON, than the screen turns OFF when charging.
Very confused.
Related
Hi, got a SGH-T889 with the back lit led screen keep go out once in deep sleep (happen over night or after not using for a period of time). This can happen during charging or not charging, the phone is cold or warm, its environment warm or cold.
Detail steps of issue:
-Press the Wake/Power button, screen and backlit buttons lit up for a micro of second and turned off.
-Any button or combination of buttons pressed will wake the phone.
-Pull battery and pop it right back in, phone turn on but screen and backlit buttons lit up for a micro of second and turned off. The phone still function.
-Pull battery and leave it out for a minute, pop battery back in.
-Phone wake and function normally until the next time it happen.
After problem, I've notice I've got some new files which I don't know what are they but they're seem to relate to the issue. See attached.
I'm running sammobile stock 4.3 ROM: T889UVCMK7
Phone is rooted, have teamwin touch recovery v2.7.0.1
Does anyone experience this? and hopefully have a solution.
I've had the moto360 for a while and never had any problems till now, I had a normal day but the battery died before I could put it into the cradle. When I did, it showed the battery charging icon (not ring), after letting it charge for a while it wouldn't startup. After an hour it showed the battery charging ring, but when I lift it from its cradle it would go black. The next day, the screen doesn't display anything and when you press the button for a few seconds, it would vibrate and turn on the display (not showing anything. I hope it's not bricked!!!
Do you have a black screen app like Slumber that shows black screen when charging?
If you hold down the side button it should reset eventually
v3ngence said:
Do you have a black screen app like Slumber that shows black screen when charging?
If you hold down the side button it should reset eventually
Click to expand...
Click to collapse
well when its charging, it would always show the charging ring and the time, also I have held the power button for 2-3 minutes and nothing else happens
My SW3 ran to about 10%, I went to turn the brightness down before recharging and the screen greyed out (the brightness adjustment menu item is just about visible, no backlight).
The screen is non-responsive and I suspect the watch is actually off with a residual image on the screen. I can't turn it on or reboot by holding the power button down.
Plugged in now for 2.5h, no signs of life and still won't turn on.
What now? is this a recognised issue?, will it come back to life if I keep it plugged in or should I be doing something else.
Sideburnt said:
My SW3 ran to about 10%, I went to turn the brightness down before recharging and the screen greyed out (the brightness adjustment menu item is just about visible, no backlight).
The screen is non-responsive and I suspect the watch is actually off with a residual image on the screen. I can't turn it on or reboot by holding the power button down.
Plugged in now for 2.5h, no signs of life and still won't turn on.
What now? is this a recognised issue?, will it come back to life if I keep it plugged in or should I be doing something else.
Click to expand...
Click to collapse
Okay, 5 different cables later, and finally the phone vibrated once and is now charging having blanked it's screen of the residual greyed out screen. Whether this was due to the battery fully draining or the right cable who knows.
I was on a phone call with a friend when I noticed that the screen wouldn't turn on anymore. After the call was done, I popped out the battery to shut it down.
When I take out the battery and plug the phone via usb charger, the screen turns on and is blacked out. When the battery is in, and I 'turn on' the phone, there is a very slight vibration, and after some time the phone blinks that red LED light like when I have a gmail waiting--it is as though the phone really is on and active, but the screen isn't getting signal.
I'm guessing that there's a loose connection somewhere.
Any suggestions?
I disassembled and reassembled. Didn't work initially.
Left my phone alone for 5 minutes after it booted with no screen signal, and then I press the power button, and it turned on.
So weird. Seems like I'd better back up my stuff while I can.
After the Oct update, my phone know "stops" charging after reaching 100%. My screen saver is set to run when on charger, so it stops also. Went to Always on display, turned it on, keeps turning itself off. won't hold changes. I back out, and says on, then phone goes to lock screen, then black. Open again and it's off.
Any others or tips?
mt2020 said:
After the Oct update, my phone know "stops" charging after reaching 100%. My screen saver is set to run when on charger, so it stops also. Went to Always on display, turned it on, keeps turning itself off. won't hold changes. I back out, and says on, then phone goes to lock screen, then black. Open again and it's off.
Any others or tips?
Click to expand...
Click to collapse
Charging always stops when it reaches 100% otherwise it would damage the battery / cause a fire
OK, I can see that, but my screen saver always stayed on before, now the screen saver goes off when fully charged. And no always on display??? Figure I'd turn that on and won't hold selection for on.