I have used Kies 3 to return to stock firmware and factory reset on many other Samsung products including a Tab 3 Lite, Note Pro 12.2, even the latest AT&T Note 4. But it doesn't work with the AT&T Note 2.
I need to use Kies because I don't want to trip the Knox flag.
My Note 2 is on the latest AT&T firmware, upgraded via OTA updates.
Build KOT49H.I317UCUCNE5
Bootloader I317UCUCNE5
When the command "Firmware Upgrade and Initialization" is chosen, the program says 'SGH-I317' does not support initializing. Is there any way to get this to work?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
From searching xda, there is a second method, but it doesn't work either.
The second method is this: Start with the phone disconnected. Then choose "Firmware Upgrade and Initialization".
It will prompt for the model name. Enter 'SGH-I317' without any lowercase letters.
Then it will ask for the serial number, which you can get by opening up the back and looking under the battery.
Now you can connect the Note 2 in Download mode.
Then it will go through the entire process of downloading the firmware and extracting it to a folder in:
C:\Users\<windowsid>\AppData\Local\Temp\tmp<random>.tmp.zipfilder\
Inside this folder are 5 files. I noticed that these firmware files (I317UCAMA4) are for 4.1.2 Android version rather than the latest firmware.
02/14/2013 03:00 AM 1,914,967 BOOTLOADER_I317UCAMA4_578342_REV04_user_low_ship.tar.md5
02/14/2013 03:00 AM 1,235,466,321 CODE_I317UCAMA4_578342_REV04_user_low_ship.tar.md5
02/14/2013 03:00 AM 63,457,365 CSC_ATT_I317ATTAMA4_578342_REV04_user_low_ship.tar.md5
02/14/2013 03:00 AM 47,452,242 MODEM_I317UCAMA4_578342_REV04_user_low_ship.tar.md5
11/01/2014 10:27 PM 1,674,752 SS_DL.dll
5 File(s) 1,349,965,647 bytes
But it gets an error when it tries to start the firmware update.
Notice the recovery code is blank, so you actually can't start firmware emergency recovery.
On the Note 2 side, it says "SW REV. Invalid magic string."
Using ODIN 3.07 with the files downloaded above doesn't work either. Gets a "FAIL!" error.
chiwalfrm said:
Using ODIN 3.07 with the files downloaded above doesn't work either. Gets a "FAIL!" error.
Click to expand...
Click to collapse
I am having the same "FAILED" issue on both Odin and Kies (except I am using Note 8.0). Seeing as this post is over a month old, have you found a fix or anything helpful regarding this annoying issue?
Looks like the flash is failing because you are trying to flash an incompatible bootloader.
Posted above is correct.
Flash back to LJ2
How to OTA to 4.4.2 from LJ2 4.1.1 (w/NE5/MK6 bootloader!)
http://forum.xda-developers.com/showthread.php?t=2618447
Related
Telstra replaced the phone no hussle but i want to get some photos of it...
the phone just boots to samsung logo screen and blue light stays lit on top
the phone is complete stock nothing ever done to modify it(not my phone family member and she doesnt remember or know the last os version)
Can get it into download mode only been researching about using odin to flash stock...but most links are dead or stuff outdated
and i dont want to lose the photos
any chance of saving the photos(dont really care about anything else just photos)
update...
tried flashing stock rom from sammobile(4.3 Telstra Australia) and it would fail everytime....
Still need help
tried 3 different pcs...5cables...4 version of odin(1.3,1.85,3.04,3.07) all fail after it selects sboot.bin
trying to flash 4.3 telstra rom
PRODUCT NAME : GT-7105
CUSTOM BINARY DOWNLOAD :NO
CURRENT BINARY : Samsung Official
SYSTEM STATUS : Official
KNOX :0
RP SWREV : A2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
BUMP....
Can you get into recovery mode? Or just download mode?
Do you have KIES installed?
Try keep Odin open and change USB ports, remount the PDA & flash.
xLeonardo said:
Can you get into recovery mode? Or just download mode?
Do you have KIES installed?
Try keep Odin open and change USB ports, remount the PDA & flash.
Click to expand...
Click to collapse
just download mode...(when i try to get to recovery it just keeps re-flashing the first screen with samsung note g-tn7105t)
yeah kies installed...removed from processes ...the other pc has no kies
tried every single way (even gave a recovery.tar ago cf auto root.tar (all right files for n7105 and all fail with nand write)
so if its rw corrupt nand ...whats my options....
May need to flash pit as a last resort.
http://forum.xda-developers.com/showthread.php?t=2032849
Post 4
Do you still have warranty?
xLeonardo said:
May need to flash pit as a last resort.
Do you still have warranty?
Click to expand...
Click to collapse
i could care less what happens to the phone i just need some photos from it very important to me last few photos weren't backed up (ARGHHHHH)
been searching for the pit for 32gb can not find it...
Cile90 said:
i could care less what happens to the phone i just need some photos from it very important to me last few photos weren't backed up (ARGHHHHH)
been searching for the pit for 32gb can not find it...
Click to expand...
Click to collapse
I've edited my post above.
nope...it doesn't wont to be flashed
fails right at the start...
Cile90 said:
nope...it doesn't wont to be flashed
fails right at the start...
Click to expand...
Click to collapse
Looks like the motherboard is stuffed. Take it into Samsung.
Hi all,
This is my first post and I apologize if I am in the wrong place!
I have been reading through the different forums associated with my issue and have yet to find a fix for my particular situation. So here is the deal...
I can in to download mode just fine but when I boot up normally I get pushed to the stock Android Recovery screen where I am bombarded with red error messages identical to this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have exhausted Odin as well as Kies. I have tried re-partitioning using pit files (I did not have a backup of my own so I might just need the right one however I got the T889V pit file from one of the forums on xda). I continuously get stuck at "Get PIT Mapping" and "NAND Write Start" when using Odin and have tried flashing it on its own and along with the stock tar file I got from SamMobile.
I am wondering if anyone has any other ideas that can help as this is for a friend who is not tech savvy whatsoever.
* I will also note that I have tried uninstalling the drivers and kies and ending kies processes while using odin.
danloney said:
Hi all,
This is my first post and I apologize if I am in the wrong place!
I have been reading through the different forums associated with my issue and have yet to find a fix for my particular situation. So here is the deal...
I can in to download mode just fine but when I boot up normally I get pushed to the stock Android Recovery screen where I am bombarded with red error messages identical to this:
I have exhausted Odin as well as Kies. I have tried re-partitioning using pit files (I did not have a backup of my own so I might just need the right one however I got the T889V pit file from one of the forums on xda). I continuously get stuck at "Get PIT Mapping" and "NAND Write Start" when using Odin and have tried flashing it on its own and along with the stock tar file I got from SamMobile.
I am wondering if anyone has any other ideas that can help as this is for a friend who is not tech savvy whatsoever.
* I will also note that I have tried uninstalling the drivers and kies and ending kies processes while using odin.
Click to expand...
Click to collapse
Sir, ur phone is a brick. Send it to samsung service station.
Sent from my GT-N7100 using Tapatalk
I bought this samsung galaxy the T model. I rooted using ODIN>CWM>SUPERSU. Now i want to install wickedXrom but I have to update the bootloader to ND8 I believe or else risk bricking my phone. I've downloaded the philz recovery to odin flash it to my phone, but it doesnt show up after I click AP on ODIN, even though i have TWO philz recovery files in the folder. I tried removing ".md5" from the name and it turned into a zip file and that didnt help at all. The problem I'm having is with oDIN. If i try to flash "L710-ND8-Bootloader" I get a fail. If i try to flash philz it wont even show up under pda...
I've been researching and looking around for hours now before i finally decided to make a post.
Spidakid said:
I bought this samsung galaxy the T model. I rooted using ODIN>CWM>SUPERSU. Now i want to install wickedXrom but I have to update the bootloader to ND8 I believe or else risk bricking my phone. I've downloaded the philz recovery to odin flash it to my phone, but it doesnt show up after I click AP on ODIN, even though i have TWO philz recovery files in the folder. I tried removing ".md5" from the name and it turned into a zip file and that didnt help at all. The problem I'm having is with oDIN. If i try to flash "L710-ND8-Bootloader" I get a fail. If i try to flash philz it wont even show up under pda...
I've been researching and looking around for hours now before i finally decided to make a post.
Click to expand...
Click to collapse
It's good you're getting a fail. This doesn't apply to the L710T Model. Simply go to post #4 of my thread and there is a link to a tutorial on how to flash with the L710T Model. I'll update the OP to include this information so no one gets confused.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My ROMs: Wicked X & Wicked S5 Xperience
these are the instructions.. they're pretty simple but at #4 that file doesnt show up when I click PDA
1. Extract Download file
2. Put phone into download mode (power off, then power button + Volume Down, then volume up when prompted)
3. Open Odin (right click > open as administrator)
4. Load File L710VPUCND8_L710SPRCND8_L710VPUCND8_HOME.tar.md5 into the PDA slot
5. Start flashing
6. Grab some popcorn because it will take a while
I first was stuck in this screen ,
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i have flashed the 2 lastest 5.1.1 firmwares availables in sammobile G925TTMB2DOH6 and G925TUVU2COF8, but i get stuck on the samsung gs6 edge logo without red text and i have to wait the battery to fully drain to boot to stock recovery or download mode again, im downloading G925TUVU2COF6 is the earlier 5.1.1 firmware , i guess phone wont let me flas 5.0.2 ,, any sugestions???:crying:
Try and redownload the latest version. Once the bootloader has been upgraded you can not downgrade it. Also do a full master reset if you haven't then flash.
M9x3mos said:
Try and redownload the latest version. Once the bootloader has been upgraded you can not downgrade it. Also do a full master reset if you haven't then flash.
Click to expand...
Click to collapse
what you mean with full master reset? i flashed the last twiece, i also did a data wipe but not cache ill reflash again and wipe cache also,
where can i get the individual stock tars?
This is what i get in downlod mode
UPDATE: iflashed a sboot.tar file in odin and phone booted up but i get this green text and if i flash any of the sammobile 5.1.1 firmwares it get stuck again in the s6 edge logo i need the 4 tars AP BL CP CSC files to fully get back to stock i guess
also the system status and knox changed in odin mode
elmy2424 said:
UPDATE: iflashed a sboot.tar file in odin and phone booted up but i get this green text and if i flash any of the sammobile 5.1.1 firmwares it get stuck again in the s6 edge logo i need the 4 tars AP BL CP CSC files to fully get back to stock i guess
also the system status and knox changed in odin mode
Click to expand...
Click to collapse
Same situation, do you have a link to the sboot.tar file? It really works? Because ive done everything possible.
Hi, I have a problem since a few days ago.
I have a J2 prime that had certain system problems so I decided to flash it with Odin.
The process ended correctly but never started the phone (stuck in erasing...)
I did many operations:
I did a wipe data in recovery (and stuck in rebooting...), I have marked nand erase all in odin, I have even downloaded another firmware of the same model, I flashed with another Odin and the problem continues.
The phone was connected to the charger all night (7+ hours) While the screen appeared "erasing ..."
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If I remove the battery I get the message "no Command" when turning on the device again
I need help, please.
Sorry for my bad english
andrecuellar said:
Hi, I have a problem since a few days ago.
I have a J2 prime that had certain system problems so I decided to flash it with Odin.
The process ended correctly but never started the phone (stuck in erasing...)
I did many operations:
I did a wipe data in recovery (and stuck in rebooting...), I have marked nand erase all in odin, I have even downloaded another firmware of the same model, I flashed with another Odin and the problem continues.
The phone was connected to the charger all night (7+ hours) While the screen appeared "erasing ..."
If I remove the battery I get the message "no Command" when turning on the device again
I need help, please.
Sorry for my bad english
Click to expand...
Click to collapse
Some small details needed I guess. These are mandatory for flashing w/ Odin anyway:
0. Firmware is downloaded from known site like SamMobile or Updato.
1. Odin version is 3.12.3
2. Firmware matches your model name (which i guess you have)
3. Flash all 4 (BL/AP/CP/CSC)
It seems like your phone stuck in erasing tho. Maybe try replace the CSC with the HOME_CSC included in zip file.
( The HOME_ one is basically the same with normal, except it skips wiping data)
Looking forward for the reply~!
Prove N. said:
Some small details needed I guess. These are mandatory for flashing w/ Odin anyway:
0. Firmware is downloaded from known site like SamMobile or Updato.
1. Odin version is 3.12.3
2. Firmware matches your model name (which i guess you have)
3. Flash all 4 (BL/AP/CP/CSC)
It seems like your phone stuck in erasing tho. Maybe try replace the CSC with the HOME_CSC included in zip file.
( The HOME_ one is basically the same with normal, except it skips wiping data)
Looking forward for the reply~!
Click to expand...
Click to collapse
I've run everything but it still doesn't work