Mirrorlink - Sprint Galaxy Note 4 Q&A, Help & Troubleshooting

Does anyone know how to use Mirrorlink on Note 4? Setting is in NFC but I can't check box

Connect it to the head unit
Once you connect the phone via usb to a mirrorlink enabled device you'll be able to check the box.
Please let me know if you are able to launch the app because it just won't connect in my jvc nsx700. The app just loop crush on mine

I have a 2015 Subaru outback, the stereo has mirrorlink and it works pefectly with my wife's galaxy note 2 (pre-kitkat). When I connect my note 4 it says on the phone that mirror link is starting, but the radio never seems to recognize it. I have not had time to look into it much, but I wonder if the version of mirror link has something to do with it. I have not tried checking the box to start it. It seems like the phone automatically picks up it's connected to a mirrorlink device.

Having the same issue with AT&T Note 4 on a 6000NEX. I even get the message on my phone that mirrorlink is connected, but the screen on my deck stays black like it is trying to load.

I have a note 4 on us cell and a pioneer appradio 3. I was getting the same issues with mirrorlink. I found a post where someone had contacted pioneer and the response they got was that the note 4 uses mirrorlink 1.1 and my head unit uses 1.0 and they didn't know if or when they would update the firmware. I suspect this is the issue for anyone trying to use mirrorlink with the note 4. Sometimes it sucks having the latest and greatest. I do have mine working with a mhl adapter and have full screen mirroring on my head unit. I just hate having all the clutter and would love to just have one usb cable.
Thread I referenced

Reefermattness said:
Having the same issue with AT&T Note 4 on a 6000NEX. I even get the message on my phone that mirrorlink is connected, but the screen on my deck stays black like it is trying to load.
Click to expand...
Click to collapse
I am also facing the same problem with Samsung Galaxy Note 4. Have you had any luck with that yet??

dogmir said:
I have a note 4 on us cell and a pioneer appradio 3. I was getting the same issues with mirrorlink. I found a post where someone had contacted pioneer and the response they got was that the note 4 uses mirrorlink 1.1 and my head unit uses 1.0 and they didn't know if or when they would update the firmware. I suspect this is the issue for anyone trying to use mirrorlink with the note 4. Sometimes it sucks having the latest and greatest. I do have mine working with a mhl adapter and have full screen mirroring on my head unit. I just hate having all the clutter and would love to just have one usb cable.
Thread I referenced
Click to expand...
Click to collapse
I had also seen that thread. Very good info. Am going to give them a call myself. Pioneer did just update to 1.08. Has anyone tried with that firmware yet? My car is at the shop currently.
shwetha_kn said:
I am also facing the same problem with Samsung Galaxy Note 4. Have you had any luck with that yet??
Click to expand...
Click to collapse
Still fighting with it.

I have tried everything on my pioneer avh x7700bt wich hase mirrorlink version 1.1 en my n910c Note 4 hase 1.1 to and it dosent work Either tried it with a friend his Sony Xperia z en works perfect i think its a bug in the touch wiz rom
Can Anybody please verify this.

Just look for appradio unchained reloaded. Root, a permissive selinux kernel, and that app. You can have full touch mirroring on your pioneer app radio and nex rads
Sent from my SM-N910P using XDA Free mobile app

App radio unchained is for hdmi or mhl connections wich my app radio dosent have it hase only usb mirrorlink en Bluetooth

Steves1990 said:
I have tried everything on my pioneer avh x7700bt wich hase mirrorlink version 1.1 en my n910c Note 4 hase 1.1 to and it dosent work Either tried it with a friend his Sony Xperia z en works perfect i think its a bug in the touch wiz rom
Can Anybody please verify this.
Click to expand...
Click to collapse
I have the same combo Galaxy Note 4 with the AVH-X7700BT AND i GET THE ERROR MESSAGE "RESET SMART DEVICE".
The Note4 does work with Appradioone after you update the firmware on the X7700. But it will not launch directly to Mirrorlink to mirror the smartphone directly.

I'm guessing that there has been no progress made on this?
I've got a Tmo Note 4 with a Pioneer x2700BS. I get the "Reset Smart Device" message.
I think that you might need a MirrorLink app first, but I tried to load one on there (MiRoamer) to see if it would do anything. The phone says that the app is certified, but the head unit doesn't do anything.

This is a Samsung issue. The s5 is receiving lollipop update with mirrorlink and doesn't work either. The s4 mini, note 4 and note edge were removed from the approved devices list on the mirrorlink site a few days ago. We need to be pushing Samsung on this issue.

dogmir said:
I have a note 4 on us cell and a pioneer appradio 3. I was getting the same issues with mirrorlink. I found a post where someone had contacted pioneer and the response they got was that the note 4 uses mirrorlink 1.1 and my head unit uses 1.0 and they didn't know if or when they would update the firmware. I suspect this is the issue for anyone trying to use mirrorlink with the note 4. Sometimes it sucks having the latest and greatest. I do have mine working with a mhl adapter and have full screen mirroring on my head unit. I just hate having all the clutter and would love to just have one usb cable.
Thread I referenced
Click to expand...
Click to collapse
How did you get this to work i cant figure it out i have note 4 on sprint and app radio 3 went to best buy and they sais it wasnt compatible but i thought it would be

krazyflipj said:
Does anyone know how to use Mirrorlink on Note 4? Setting is in NFC but I can't check box
Click to expand...
Click to collapse
I have a Pioneer AVH-x7700bt and the Note 4 and no luck either.
I believe it to be a ver 1.1 vs 1.0 issue , even though this https://cert.mirrorlink.com/ProductListing/ says they are both ver 1.1!!!

Mirrorlink works under the Lollipop update for the Note 4.
However, you need a Mirrorlink app to use it. An example is miRoamer.
There's only a few, and they all kinda suck.

Hi! Install Apps miRoamer, Glympse, iCoyote, Audioteka, and Parkopedia for MIrrorLink usage.
With Note 4 after the MirrorLink connection established you have to install the Car App, then on the MirrorLink menu on the HU the Certified Apps are shown.
If somebody have time to do this installations please test the apps while driving. And give a feedback regarding driver distractions.

caba85 said:
Hi! Install Apps miRoamer, Glympse, iCoyote, Audioteka, and Parkopedia for MIrrorLink usage.
With Note 4 after the MirrorLink connection established you have to install the Car App, then on the MirrorLink menu on the HU the Certified Apps are shown.
If somebody have time to do this installations please test the apps while driving. And give a feedback regarding driver distractions.
Click to expand...
Click to collapse
No luck here. I installed miRoamer on my Note 4. In the mirror link settings on the phone the app is listed as a certified app. when I connect the the phone to the car it shows the "phone is connected using mirror link" but nothing happens on the car display. The only thing I see missing from what I have done, was install the Car App. I'm not sure what you meant by the car app.

Hi,
The connection between my NOTE 4 and my car radio device (Volkswagen POLO, with MIRRORLINK) was very difficult until yesterday...
Before yesterday, when my phone was connected with Mirrolink, i was able to see applications (only ones fully compatible)...but when i started one, screen was black and nothing appeared!
Until Yesterday, after 1 day by my Car Seller (and after a software update of my car stereo device), Mirrolink is fully compliant with my NOTE 4!!!
So, if you have any problem of black screen, ask your manufacturer if an update exists...that could be a solution!

Hey guys something new? I got the new firmware 8.40 for Pioneer Avh-x7700bt in Germany and my note 4 is latest update too. Doesn't work there was something new, new screen with "searching mirror link" and two monitors on my note 4 but failed after searching again nothing. Both are now mirror link 1.1 I thought my avh-x7700bt is broken but if all of you have the same problem. And the app doesn't work.

Related

AllshareCast Dongle S/W update today

I got a notice to download the "AllshareCast Dongle S/W Update" to version LJ02 today. I don't have an AllshareCast dongle and I didn't even know that this app was installed on my phone. I'm wondering why they've pushed it out to everybody (I assume), since I imagine that only a tiny number of people have the app. Seems like it would make sense to install it only for people who actually have the dongle.
I'm thinking about uninstalling or freezing it. Has anybody else received it? Any thoughts?
I received the update last night around 130 am eastern........ Had no clue what it was. I am going to delete in a few minutes
Sent from my SAMSUNG-SGH-I747 using xda premium
even after update not clear it really updated the dongle.. no real way to tell.. still get system crash after connecting to the dongle. in lh1 firmeware.
lgkahn said:
even after update not clear it really updated the dongle.. no real way to tell.. still get system crash after connecting to the dongle. in lh1 firmeware.
Click to expand...
Click to collapse
What exactly is it
Sent from my SAMSUNG-SGH-I747 using xda premium
DerekPradoFLA said:
What exactly is it
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
It's supposed to allow the GS3 to update the software on the Allcast dongle that you can attach to TVs and such for device mirroring.
Sir_Brizz said:
It's supposed to allow the GS3 to update the software on the Allcast dongle that you can attach to TVs and such for device mirroring.
Click to expand...
Click to collapse
The update is showing as not compatible with my SGS3 if I look at it on the Play Store. Dunno if it's a region thing or the fact I'm rooted with stock?
I'm keen to try this update on my Allshare dongle. Would anyone be able to extract the APK for this update?
skuffle said:
The update is showing as not compatible with my SGS3 if I look at it on the Play Store. Dunno if it's a region thing or the fact I'm rooted with stock?
I'm keen to try this update on my Allshare dongle. Would anyone be able to extract the APK for this update?
Click to expand...
Click to collapse
Are you on LH9? It seems to only work on LH9 and LI5.
It's not an ATT GS3, so it's not got that firmware on it, but is the latest stock for my region, as far as I know (UK).
I was hoping the APK alone might still work, as it appears to be updating the Allcast dongle itself, rather than being tied to anything on the phone, hardware-wise.
Perhaps Samsung are rolling it out to a select few 'test' firmwares first? I believe I'm on LJ4, but I'm not up on Samsung's firmware terminology - not needed to really stray from rooted stock on this phone.
If you're able to extract the APK, it would be much appreciated
Sent from my GT-I9300 using Tapatalk 2
skuffle said:
It's not an ATT GS3, so it's not got that firmware on it, but is the latest stock for my region, as far as I know (UK).
I was hoping the APK alone might still work, as it appears to be updating the Allcast dongle itself, rather than being tied to anything on the phone, hardware-wise.
Perhaps Samsung are rolling it out to a select few 'test' firmwares first? I believe I'm on LJ4, but I'm not up on Samsung's firmware terminology - not needed to really stray from rooted stock on this phone.
If you're able to extract the APK, it would be much appreciated
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
I will see if I can get it.
The developers email is s[email protected]. If that doesn't ring alarm bells I'm not sure what would..
z2k said:
The developers email is [email protected]. If that doesn't ring alarm bells I'm not sure what would..
Click to expand...
Click to collapse
This is a legitimate Samsung update and it is a part of the function that allows you to share the screen with Dlna enabled devices such as blue ray players, wdtv (and other streaming boxes) and hdtv with the function.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
stan.s said:
This is a legitimate Samsung update and it is a part of the function that allows you to share the screen with Dlna enabled devices such as blue ray players, wdtv (and other streaming boxes) and hdtv with the function.
Click to expand...
Click to collapse
Are you sure about that? What you're describing sounds like "AllShare Play" which is a completely different app. Where did you get your information that this app has some connection to DLNA?
I have been using the all share dongle. It is just as described as above. I mirror my phone thru the dongle to and TV with a HDMI port. Or Samsung devices. Play videos games whatever. All share play let's you remote control devices from your phone. All share dongle does work thru some type of dlna service from what I read on Samsung site and other places.
I was using this feature before the update was put out. It now shows up as a installed app. Before the update it was just something you could turn on in settings and still is.
It's the pre configured scan portion for the $90 wifi dongle that you buy to connect to hdmi port on projectors and hdtv displays and or the software for your computer that allows you to share via wifi or Internet.
I bought the MHL connection and carry a cable so when I am in hotels I watch what I want (netflix, Hulu) while the phone charges.
But the address of the developer is legit.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
stan.s said:
It's the pre configured scan portion for the $90 wifi dongle that you buy to connect to hdmi port on projectors and hdtv displays and or the software for your computer that allows you to share via wifi or Internet.
I bought the MHL connection and carry a cable so when I am in hotels I watch what I want (netflix, Hulu) while the phone charges.
But the address of the developer is legit.
Click to expand...
Click to collapse
I'm sure that the update is legit. I just want to avoid confusion and misinformation about what it's for:
The Allshare Cast Dongle app supports the Allshare Cast Dongle
The Allshare Play app provides DLNA connectivity to DLNA-capable devices
I believe that the Allshare Cast Dongle does not use DLNA and that this update has no relationship to the Allshare Play app or to DLNA capability. If anybody has good evidence to the contrary, please post it.
That being said, my guess is that this new update being pushed out is useless to the great majority of us who don't have the dongle.
I'm pretty sure All Share Cast is Samsung's version of Miracast.
Sir_Brizz said:
I'm pretty sure All Share Cast is Samsung's version of Miracast.
Click to expand...
Click to collapse
That's exactly what it is, I don't think the dongle uses DLNA at all.
I've found that this update has been changed to be compatible with my phone (stock UK GS3) over the last few days. It originally was shown as not compatible.
It basically prompts you to update your Allshare Cast dongle firmware when you next connect to it. It updates the dongle firmware - wirelessly - to version LJ02, which appears to have made the dongle connection much more stable, and quicker to establish.
OK, so I installed the update, then uninstalled it when I saw that it was useless for me. Now, I am getting a perpetual update notice in Google Play. Does anybody know a way to make the update notice go away without actually installing the app? The only way I can think of is to install it and then freeze it, but that seems like a waste.
stan.s said:
It's the pre configured scan portion for the $90 wifi dongle that you buy to connect to hdmi port on projectors and hdtv displays and or the software for your computer that allows you to share via wifi or Internet.
I bought the MHL connection and carry a cable so when I am in hotels I watch what I want (netflix, Hulu) while the phone charges.
But the address of the developer is legit.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
Why do you believe that the email address is legit? If you go to the "Samsung Mobile Print" app in google playstore the developers email is mprint.sec@samsung.com
z2k said:
Why do you believe that the email address is legit? If you go to the "Samsung Mobile Print" app in google playstore the developers email is mprint.sec@samsung.com
Click to expand...
Click to collapse
I just had a quick back and forth with Samsung. It is Not a official app. All official app can be found at www.Samsungapps.com.
Edit: seems that Samsung isn't sure it is or not.... They talked with someone else who says that it is valid. XDA has it marked as bloatware that can be removed.
Edit2: Lookout Security says they've been asked about it before and "We have encountered this in the past and Samsung has stated that this is their app via our contact." I'm requesting it be confirmed.
Edit3: A second person at Samsung support says it's not official and a 3P app.
It CAN be un installed with TI. First detach it from the market and then uninstall. It's actual name is com.sec.fwupgrade so don't be alarmed when it says that. I will be sending it to a couple of security vendors to include in malware lists and questioned Samsung why they have not had the app removed.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

Allshare cast update available - ME29

Just got ME29 firmware update, and i think it takes away the lag i used to see before.
Screen mirroring from my s3 and note10.1 is much faster now!
I think they have added true HD support for mirroring now.... i am guessing in preparation for note 3 release.
Sent from my GT-N8013 using Tapatalk
Did this update the dongle itself like the previous updates?
I've installed the app update, but am not getting the firmware upgrade prompt when I connect to the dongle.
My dongle still shows version LJ02. Previous updates have changed the actual dongle firmware version for me...?
Sent from my GT-I9300 using Tapatalk 2
skuffle said:
Did this update the dongle itself like the previous updates?
I've installed the app update, but am not getting the firmware upgrade prompt when I connect to the dongle.
My dongle still shows version LJ02. Previous updates have changed the actual dongle firmware version for me...?
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Yes, it did for me.
Hmm, strange. Does yours say version ME29 on the connection standby screen (on the TV) now?
Is your phone a GT-I9300 too?
Thanks
Sent from my GT-I9300 using Tapatalk 2
My Allsharecast dongle with version ME29 refuse to connect
Hello.
I updated my Allsharecast doungle to latest version ME29, and also got the connectivity problem.
The solution was to disconenct the Allshare Cast Doungle from my Yamaha receiver and connect it directly to my Samsung TV HDMI port. This solved the problem ( a RESET was also needed ). Hope it helps !!!!!!
Hello
I can't update my allshare cast dongle and I don't know why
Enviado desde mi GT-N7100 usando Tapatalk 2
ezrakoper said:
Hello.
I updated my Allsharecast doungle to latest version ME29, and since then i am unable to sync my Galaxy Note2 to the device. The connection will always fail, and i lost my mirroring capability.
Before the upgrade it was working just fine.
Anyone with similar problem, and any idea how to fix it or go back to previous version?
Thanks
Click to expand...
Click to collapse
I've got exactly the same problem. With the version before it was working. After the update the connection failes every time.
I'm on stock kernel and checked flash counter and reset it. No help anyway. I hope Samsung is going to fix this. Is there anyone with a note 2 on which it is working with the new version ME29?
Damn...
Sent from my GT-N7100 using xda app-developers app
kiwiwiwi said:
I've got exactly the same problem. With the version before it was working. After the update the connection failes every time.
I'm on stock kernel and checked flash counter and reset it. No help anyway. I hope Samsung is going to fix this. Is there anyone with a note 2 on which it is working with the new version ME29?
Damn...
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
Exactly the same problem, but with an S3. Worked fine rooted with the previous dongle version, connection now always disconnects after 10 seconds with ME29.
If anyone is thinking of upgrading and is rooted, I'd hold on until this is resolved - the dongle is essentially useless for me now. FFS Samsung!
Same issue, not with root
skuffle said:
Exactly the same problem, but with an S3. Worked fine rooted with the previous dongle version, connection now always disconnects after 10 seconds with ME29.
If anyone is thinking of upgrading and is rooted, I'd hold on until this is resolved - the dongle is essentially useless for me now. FFS Samsung!
Click to expand...
Click to collapse
Hi all,
Updated my dongle to ME29 as well and none of my devices can connect to it either. Well noted is that none of them are rooted, so root has nothing to do with the issue! Have tried with both galaxy s3 and galaxy note 8.0.
Hope Sammy fixes it really soon!
Ps. Another thing was that the update also changed my device name which didn't happen on the last update...
popeppel said:
Hi all,
Updated my dongle to ME29 as well and none of my devices can connect to it either. Well noted is that none of them are rooted, so root has nothing to do with the issue! Have tried with both galaxy s3 and galaxy note 8.0.
Hope Sammy fixes it really soon!
Ps. Another thing was that the update also changed my device name which didn't happen on the last update...
Click to expand...
Click to collapse
Hello,
Exactly the same thing with an S3 and "multiple windows" are activated by themselves.
I have stock, unrooted note 10.1 tablet and att s3 cell.
I can connect fine as mentioned in OP.
So maybe its rooted phones that have this issue.
Sent from my GT-N8013 using Tapatalk
Upgraded my galaxy s3 to 4.1.2, and can confirm that allshare dongle still works nicely.
So it may be phones with modified or custom status that are now having issues.
Sent from my GT-N8013 using Tapatalk
To further confuse the situation, it seems my rooted s3 connects fine to the ME29 dongle when it is plugged directly into my Sony TV. It doesn't work at all via my Onkyo AV receiver.
Both worked fine on the previous version, so it looks like the update makes some kinds of connections to certain devices unstable or impossible.
Other threads posted seem to clarify this, perhaps due to it not waiting long enough to negotiate the HDCP connection on some TVs and projectors.
It certainly doesn't seem related to having rooted the phone. I've just watched a full film without issue on the working TV using Allshare.
Hopefully Samsung will note and address this issue quickly.
Sent from my GT-I9300 using Tapatalk 2
no problem
Hello,
I have rooted galaxy note 10.1, I update allshare cast dongle to ME29 version.
There is no problem at all. The tablet connected to the dongle and I used it more than twenty minutes without any disconnection.
Anyone try to solve the problem by pushing the reset button in the back of the dongle? (just try)
By the way my TV is Samsung LCD series 3.
Previous version works with Nexus 4.. not now
Samsung is getting more and more proprietary
Sent from my GT-N5100 using Tapatalk 4 Beta
Same issue - connection Problem NOT - NOT root
My Allsharecast dongle with version ME29.
Hello.
I updated my Allsharecast doungle to latest version ME29, and it was a bad decision....after upgrade connection problem...
Solution from few post above:
"The solution was to disconenct the Allshare Cast Doungle from my Yamaha receiver and connect it directly to my Samsung TV HDMI port. This solved the problem ( a RESET was also needed ). Hope it helps !!!!!! "
in my case dongle not working with Pioneer receiver and Epson projector.
Darius310 said:
My Allsharecast dongle with version ME29.
Hello.
I updated my Allsharecast doungle to latest version ME29, and it was a bad decision....after upgrade connection problem...
Solution from few post above:
"The solution was to disconenct the Allshare Cast Doungle from my Yamaha receiver and connect it directly to my Samsung TV HDMI port. This solved the problem ( a RESET was also needed ). Hope it helps !!!!!! "
in my case dongle not working with Pioneer receiver and Epson projector.
Click to expand...
Click to collapse
I have the same problem with denon receiver. Is any way to fix it?
If I connect directly with LG TV it is works.
Same problem with my onkyo receiver just spent 45 minutes on the phone with Samsung support and got nowhere. GN2 Beans Build 21
Have tried contact with Samsung Support multiple times regarding this but they do not even seem to acknowledge the problem, still want me to do a factory reset of my phone... *sigh*.
As the rest, works perfectly connected directly to the TV but I can forget about the reciever. Have tried to find a way to revert firmware but seems impossible, has anyone got a clue how to go back to the previous dongle firmware?
can anyone tell me if (in the end) it is possible to have two remembered devices? e.g. two phones in the house... I've heard that in order to do this you need to reset de dongle each time you wanna connect a second phone...
any inputs?

[Q] screen mirroring not working, hardware problem?

Hello everyone, I just bought a Samsung smart tv with screen mirroring feature and my note 4, my wife old note tablet connects with no problems, but my note 10.1 2014 edition gives me "unable to connect because of an hardware problem" message. I am not rooted, I have the U.S wifi edition. patch did not help either.
does anybody have a solution please. going crazy. spent arm and a leg for a smart Samsung TV and can not do a simple task.
Have same problem connecting to Sony cinema system. S4 connects with screen mirrowing but note note 2014 with same Android version gives connecting error. If I find solution I will let you know.
Sent from my SM-P600 using Tapatalk
Also having Mirroring issues
I also have a Samsung Galaxy Note 10.1 (2014 Edition) that is having issues with mirroring. I have an older TV and purchased a Netgear Push2TV device PTV3000 for wireless mirroring. When I try to connect to the Netgear device the Tablet usually fails to connect and displays the "unable to connect because of a hardware problem". I have been able to get it to connect, however, if I reboot the tablet, but if you disconnect and try to reconnect it will display the same error message.
Even if you do get it to connect it will drop out like clockwork about every 3-5 minutes. I tried to stream a movie to it and locked up every 3-5 minutes all the way through over and over. The movie will just freeze and then the tablet It will display something like "lost connection to the server " and you can report or reconnect. It will reconnect and start back where it left off, but quit again in 3-5 minutes. Very frustrating for a brand new 600 dollar device.
This is most likely a software problem if you don't have any trouble with your wifi connection.
I do not have any reason to believe my WIFI has any issues. I can stream the movie to the Samsung Tablet without any problem, it's only when I try to use the mirroring that problems occur. Also, I was able to mirror using the exact same setup with an android phone I had laying around that's about 3 years old and was able to 1) connect to the Push2TV much more readily 2) stream the movie without it locking up every 3-5 minutes.
I just bought a brand new Samsung smart TV 7250 series. Exact same problem. P600, US, totally stock. Not even root.
Sent from my XT1060 using Tapatalk
mikejj24 said:
I also have a Samsung Galaxy Note 10.1 (2014 Edition) that is having issues with mirroring. I have an older TV and purchased a Netgear Push2TV device PTV3000 for wireless mirroring. When I try to connect to the Netgear device the Tablet usually fails to connect and displays the "unable to connect because of a hardware problem". I have been able to get it to connect, however, if I reboot the tablet, but if you disconnect and try to reconnect it will display the same error message.
Even if you do get it to connect it will drop out like clockwork about every 3-5 minutes. I tried to stream a movie to it and locked up every 3-5 minutes all the way through over and over. The movie will just freeze and then the tablet It will display something like "lost connection to the server " and you can report or reconnect. It will reconnect and start back where it left off, but quit again in 3-5 minutes. Very frustrating for a brand new 600 dollar device.
Click to expand...
Click to collapse
I just got the ptv3000, updated the firmware, and can connect no problems, except for the fact that it only mirrors a corner of my screen (only 1080p out of 1600p of the tab). I just can't figure out what to do. Yet I also saw that others had got it working. Why is it difficult with this tab.
scarlettwings said:
I just got the ptv3000, updated the firmware, and can connect no problems, except for the fact that it only mirrors a corner of my screen (only 1080p out of 1600p of the tab). I just can't figure out what to do. Yet I also saw that others had got it working. Why is it difficult with this tab.
Click to expand...
Click to collapse
So you got that working except the resolution issue right? To help others can you please share info of your device?
Which version of the tablet? (4g, 3g or wifi)
Rooted or not?
Stock or custom rom?
SM-P601 cihazımdan Tapatalk kullanılarak gönderildi
Samsung Tablet unable to screen share ...FIXED
mikejj24 said:
I also have a Samsung Galaxy Note 10.1 (2014 Edition) that is having issues with mirroring. I have an older TV and purchased a Netgear Push2TV device PTV3000 for wireless mirroring. When I try to connect to the Netgear device the Tablet usually fails to connect and displays the "unable to connect because of a hardware problem". I have been able to get it to connect, however, if I reboot the tablet, but if you disconnect and try to reconnect it will display the same error message.
Even if you do get it to connect it will drop out like clockwork about every 3-5 minutes. I tried to stream a movie to it and locked up every 3-5 minutes all the way through over and over. The movie will just freeze and then the tablet It will display something like "lost connection to the server " and you can report or reconnect. It will reconnect and start back where it left off, but quit again in 3-5 minutes. Very frustrating for a brand new 600 dollar device.
Click to expand...
Click to collapse
Hi There, No need to worry. Please read below the fix.
Alright, here is the Fix for this. Please spread the word if this works for you. Because it worked for me. I didn't discover this solution so I can't take credit for this. Here it goes:
1. On your Note Pro/Tab Pro find All Share Cast from Samsung and UnInstall all the updates. Then click Force Close, all of this should be done in Application Manager.
2. Restart your Note Pro/Tab Pro (Very Important)
3. Using two fingers pull down the main screen from top down to unveil the controls menu. Touch Screen Sharing while the Miracast or other screen sharing service (Wifi Direct etc) is activated on Your TV.
4. Let it auto find it and auto connect..........Viola!
uncensoredtr said:
So you got that working except the resolution issue right? To help others can you please share info of your device?
Which version of the tablet? (4g, 3g or wifi)
Rooted or not?
Stock or custom rom?
SM-P601 cihazımdan Tapatalk kullanılarak gönderildi
Click to expand...
Click to collapse
Hi, I have the P605 with 4G, unrooted and on stock 4.3.
imagine cars said:
Hello everyone, I just bought a Samsung smart tv with screen mirroring feature and my note 4, my wife old note tablet connects with no problems, but my note 10.1 2014 edition gives me "unable to connect because of an hardware problem" message. I am not rooted, I have the U.S wifi edition. patch did not help either.
does anybody have a solution please. going crazy. spent arm and a leg for a smart Samsung TV and can not do a simple task.
Click to expand...
Click to collapse
Hi try this.delete all share cast dongle s/w update version which is 1.2.3717 uninstall this.maybe it will help.i have the same problem on my note 3 N9000 non rooted device.if it help you please let me know.
Have p600 WiFi and tried fix and got same result. I select device, tries to connect, and returns can't connect after awhile.
Sent from my SM-P600 using Tapatalk
So I contacted Samsung customer support regarding this problem.
The first contact, they required me to do a factory reset, so in order to go any farther, I did that.
Once that was done, and the problem still existed, even before doing any updates or anything, I contacted Samsung Support again.
This time, they told me that I would have to send it in for repair at my expense (because mine is out of warranty; which pisses me off, because it was less than 3 weeks out of warranty.) Mind you, they never could tell me what the cost would be.
So apparently, I'm just not going to be able to screen cast from my SAMSUNG tablet to my SAMSUNG TV... even though screencasting from my Moto X works perfectly fine...
I do have squaretrade, but I'm not sure I want to claim that warranty just because of some screen mirroring not working...
Screen Mirroring Issue FIXED!!
Enzymaticracer said:
So I contacted Samsung customer support regarding this problem.
The first contact, they required me to do a factory reset, so in order to go any farther, I did that.
Once that was done, and the problem still existed, even before doing any updates or anything, I contacted Samsung Support again.
This time, they told me that I would have to send it in for repair at my expense (because mine is out of warranty; which pisses me off, because it was less than 3 weeks out of warranty.) Mind you, they never could tell me what the cost would be.
So apparently, I'm just not going to be able to screen cast from my SAMSUNG tablet to my SAMSUNG TV... even though screencasting from my Moto X works perfectly fine...
I do have squaretrade, but I'm not sure I want to claim that warranty just because of some screen mirroring not working...
Click to expand...
Click to collapse
Please read my response on the previous page.
chief10rules said:
Please read my response on the previous page.
Click to expand...
Click to collapse
The instructions didn't help chief. My tablet doesn't even have all share cast installed. Thanks for the idea though.
Enzymaticracer said:
The instructions didn't help chief. My tablet doesn't even have all share cast installed. Thanks for the idea though.
Click to expand...
Click to collapse
stock rom should have it. are you using a custom rom?
Nope, fully stock. Not even rooted. Is there some other name for it?
Sent from my XT1060 using Tapatalk
Enzymaticracer said:
Nope, fully stock. Not even rooted. Is there some other name for it?
Sent from my XT1060 using Tapatalk
Click to expand...
Click to collapse
That's strange. try flashing latest stock rom for your device via odin. You can download it from sammobile
SM-P601 cihazımdan Tapatalk kullanılarak gönderildi
If I had the time I'd be happy to try, but I need this tablet for work right now, and I finally just got everything set back up from when I had to factory reset over the weekend. Maybe when I have the time in the future.
Thanks
All Share Cast replaced by Samsung Link
chief10rules said:
Hi There, No need to worry. Please read below the fix.
Alright, here is the Fix for this. Please spread the word if this works for you. Because it worked for me. I didn't discover this solution so I can't take credit for this. Here it goes:
1. On your Note Pro/Tab Pro find All Share Cast from Samsung and UnInstall all the updates. Then click Force Close, all of this should be done in Application Manager.
2. Restart your Note Pro/Tab Pro (Very Important)
3. Using two fingers pull down the main screen from top down to unveil the controls menu. Touch Screen Sharing while the Miracast or other screen sharing service (Wifi Direct etc) is activated on Your TV.
4. Let it auto find it and auto connect..........Viola!
Click to expand...
Click to collapse
All Share Cast has been replaced by Samsung Link. Screen Mirror works in Chromecast app on S5 and Note 10.1 (2014) but uses the network so has some lag. Screen Mirror works with Microsoft Display Adapter on S5 without network or lag but get the hardware error on stock Note 10.1 (2014). Tried the All Share Cast Patch and that did not work either. Still looking.

[Q] MirrorLink

Howdy yall!!! I just recently obtained my Verizon Note 4 and noticed in Settings>More Networks>MirrorLink it says "Use your phone while keeping both hands in the wheel by mirroring your phone's screen on your car's display. Connect your phone to your car via a USB cable to access applications designed specifically for MirrorLink. Your car system must support MirrorLink to use this feature"..... I have Verizon Note 4 SM-910V running 4.4.4 if it helps...
So thus i tried this yet to no avail.....I have a 2014 Chrysler 300 Sport..I would think having such a newer car that it would support MirrorLink...Maybe the car system doesn't support MirrorLink??? If not any ideas on how to get this program into my vehicle's system?
Treeboy843 said:
Howdy yall!!! I just recently obtained my Verizon Note 4 and noticed in Settings>More Networks>MirrorLink it says "Use your phone while keeping both hands in the wheel by mirroring your phone's screen on your car's display. Connect your phone to your car via a USB cable to access applications designed specifically for MirrorLink. Your car system must support MirrorLink to use this feature"..... I have Verizon Note 4 SM-910V running 4.4.4 if it helps...
So thus i tried this yet to no avail.....I have a 2014 Chrysler 300 Sport..I would think having such a newer car that it would support MirrorLink...Maybe the car system doesn't support MirrorLink??? If not any ideas on how to get this program into my vehicle's system?
Click to expand...
Click to collapse
======
Seems like first thing to check would be ...the car specs...check with Chrysler.
Sent from my SM-N910V / VZW Note 4 DE / Factory Bootloader Unlocked / Rooted / Custom Kernel-ed / TWRP 2.8.4.0.trltevzw

Note 10+ and Android Auto Issues

This issue has been logged numerous times on Google Forums - but I wanted to check in with people here. I have the new Note 10+ 5G and having serious issues keeping Android Auto running with my Pioneer Head Unit (please note, I have had NO issues with other Android Phones - OnePlus 7 Pro, Google Pixel 3XL, Sony Xperia 1).
Basically, when connecting the Note 10+, Android Auto worked fine for the first session, then crashed on the second, and since simply won't connect until the phone does a full reboot (then will only work once and run into the same issues). At first I thought DEX was interfering (which it probably is!) but unfortunately there is no way to disable DEX apps or the USB response when plugging in an external connection.
Have others had this issue? Any ideas??
Thanks!
entropylabs said:
This issue has been logged numerous times on Google Forums - but I wanted to check in with people here. I have the new Note 10+ 5G and having serious issues keeping Android Auto running with my Pioneer Head Unit (please note, I have had NO issues with other Android Phones - OnePlus 7 Pro, Google Pixel 3XL, Sony Xperia 1).
Basically, when connecting the Note 10+, Android Auto worked fine for the first session, then crashed on the second, and since simply won't connect until the phone does a full reboot (then will only work once and run into the same issues). At first I thought DEX was interfering (which it probably is!) but unfortunately there is no way to disable DEX apps or the USB response when plugging in an external connection.
Have others had this issue? Any ideas??
Thanks!
Click to expand...
Click to collapse
No issues here in both of my cars
This is not note 10 this is general issues with any not stock google android and android auto. Are you trying to use wireless or usb AA? They just got wireless working with non google devices, but it's very random when it works. I've had the issue you describe(having to reboot) with wireless, USB is far more reliable.
gottahavit said:
This is not note 10 this is general issues with any not stock google android and android auto. Are you trying to use wireless or usb AA? They just got wireless working with non google devices, but it's very random when it works. I've had the issue you describe(having to reboot) with wireless, USB is far more reliable.
Click to expand...
Click to collapse
Thanks so much for your reply. I'm using a direct cable plugged into the Pioneer Head Unit. I have not had this issue with any other handset - and I suspect it may have something to do with DEX. Any other thoughts you may have?
I use it daily on my F150 and I'm not having any issues at all, working perfectly fine. You can try reinstalling the app if you haven't done that already.
Sent from my SM-N975U1 using Tapatalk
Yeah, sorry to hear that. I have a Kenwood DDX9906XR and it does wireless android auto. I have a Google Pixel 3 XL and the Note 10+. I've been able to get wireless android auto working (as well as wired) with NO issues at all. I do think the wireless option is a bit overrated and even sometimes annoying as it doesn't connect as fast as using wired. I just love that Samsung phones are one of the only few left that still use miracast so I get to use the wireless display function in my car.
I have had issue with Waze showing correctly but sometimes when switch to music music plays on screen but not audio. Have to unplu and replug..I did see new apk yesterday so will try it.
My Note 10+(4G model) is having AA issues..
Whenever I plug mine into the Focus RS(SYNC 3) it crashes at 1st use and the Note thinks I am using DEX for PC and to turn it on.
I have tried different cables including Sammy one . and reset the phone to a clean install no joy
I also had an issue with note 10+ connected to my Kenwood Excelon DDX9905S, pandora and spotify - no audio to kenwood would play. I see today there are play store updates for both, perhaps a fix.
on my car, i have to plug in the phone to the car first BEFORE starting the engine. otherwise i get no audio.
netnerd said:
on my car, i have to plug in the phone to the car first BEFORE starting the engine. otherwise i get no audio.
Click to expand...
Click to collapse
aussieak said:
My Note 10+(4G model) is having AA issues..
Whenever I plug mine into the Focus RS(SYNC 3) it crashes at 1st use and the Note thinks I am using DEX for PC and to turn it on.
I have tried different cables including Sammy one . and reset the phone to a clean install no joy
Click to expand...
Click to collapse
entropylabs said:
This issue has been logged numerous times on Google Forums - but I wanted to check in with people here. I have the new Note 10+ 5G and having serious issues keeping Android Auto running with my Pioneer Head Unit (please note, I have had NO issues with other Android Phones - OnePlus 7 Pro, Google Pixel 3XL, Sony Xperia 1).
Basically, when connecting the Note 10+, Android Auto worked fine for the first session, then crashed on the second, and since simply won't connect until the phone does a full reboot (then will only work once and run into the same issues). At first I thought DEX was interfering (which it probably is!) but unfortunately there is no way to disable DEX apps or the USB response when plugging in an external connection.
Have others had this issue? Any ideas??
Thanks!
Click to expand...
Click to collapse
I've experienced many issues with AA with a spectrum of devices. I firsts believed that my vehicle was to blame, due to the technology differences, however I've realized that my Buick Encore Preferred II (ALL STOCK EQUIPMENT IN VEHICLE) immediately broadcasts it's Bluetooth/Wifi-Direct as soon as the head-unit/radio is supplied power. I've concluded that MY issues with android auto came from the app recognizing device movement while I was driving.
Now, I'm no expert, but here's my suggestion.
1. Ensure the USB-C cable supports data-transfer and charging simultaneously. (I've made this mistake by ordering USB-C cables ((that only supported charging....poorly)) )
2. Restore Android Auto's factory settings that came with the phone, ensure any Android Auto data-backups are deleted (for troubleshooting purposes).
3. Install/Update via Play store.
4. Disable bluetooth & "forget" any paired vehicles/head-units on your phone.
5. Remove your phone from your vehicle's bluetooth memory.
At this point, your phone should be plugged in to your COMPATIBLE head-unit***, with neither devices recognizing each other.
6. Start your vehicle's battery/engine & stay stationary.
Your phone may immediately start Android Auto. Some head-units automatically do this for you as a "safety/handsfree" feature.
If Android Auto doesn't automatically initiate when you power your head-unit, run the application.
7. Follow your phone's on-screen prompts to finalize set-up.
8. Ensure your phone is connected to your vehicle's bluetooth.
Worked for me!
Remember, if it's not broken, don't fix it.
*** Supported Cars/Models can be found via google's official website
Same issue here. Worked like a charm with Mate 10 Pro, crashed with my new Note 10 + after a few seconds. Solved it by going through all my USB cables and somehow I found one that worked! (tried 5 different cables). Only a one out of 5 works. My Mate worked with all of them.
Btw: this is the one that worked
Originele Huawei 5A USB Type C Kabel Huawei Mate 20 P20 P30 Pro Type-C Kabel Voor Samsung S9 s8 Plus Oneplus 6 t USB-C Lading Kabel
https://s.click.aliexpress.com/e/kleHUWKk
---------- Post added at 10:05 PM ---------- Previous post was at 10:02 PM ----------
Would like to add that the performance of Google maps is incredibly sluggish when zoomed in. Unusable type of sluggish... Waze is perfectly fine.
works fine for me note 9 and note 10 + 5g in ford kuga. Need to make sure you set your permissions correctly and also go inot dev options and enable unknown sources if using things like spotify etc
If you want to disable dex, i've finally found an app to take the place of Samsung package disabler. . It's called CCSWE. I bought the pro license for $2.99. Samsung package disabler from android police worked great when it worked, but they kept losing your license info and have to re-purchase. Since s10+ i haven't got it to work, says something about failed registration or no license.. something to that effect. Developer is not answering any questions.
I had AA running fine on a Note 8 and an S9. On the Note 10+ it kept disconnecting after a couple of seconds. At the end I have it stable, but I had to modify all battery savings options for this app. I did not disable DeX. When I connect the Note 10 to the head unit (USB), I do get the DeX notification but that does not interfere with the connection anymore.
What I do find annoying is that I have the light and dark mode switched based on day and night time. I noticed that the mode follows the day and night mode of my head unit when connected. However, after disconnecting, the original setting (where it switches based on planned schedule on the phone itself) is no longer activated. I like the detail though, that the phone follows the car scene.
Note 10+ Android Auto on 2017 Ford F150 with SYNC 3 Version 3.0
Android Auto on 2017 Ford F150 with SYNC 3 Version 3.0 worked fine with a Samsung Note 8.
Phone was upgraded to Note 10+ and Android Auto connects and works for a few seconds and then does not work and SYNC 3 reverts back to standard Ford SYNC 3 screen.
Android Auto still works fine with same USB cable and Note 8 in either USB port in truck on SYNC 3.
Note 10+ Android Auto version is 4.5.592854-release
Note 8 Android Auto version is 4.5.592854-release
Note 10+ Android Software is Version 9 Kernel version 4.14.83
Note 8 Android Software is Version 9 Kernel version 4.4.153
Note 10+ Build number PPR1.180610.011.N975USQU1ASH4
Note 8 Build number PPR1.180610.011.N950USQS6DSG4
2017 Ford F150 SYNC 3 Version is Build 18093_PRODUCT Ford Motor Company
I can confirm that in my case I have turned off optimized power and set the phone to maximum performance. I have tried every setting for power and have not had any luck in my case on my Note 10+ phone.
I can confirm that in my case I have run through all of the USB debugging ON/OFF scenarios as well as matching every setting that is on the Note 8 that continues to work with AA and SYNC 3. I have tried every setting and have not had any luck in my case on my Note 10+ phone. I have switched USB cables using everything from Samsung to Anker one-foot to three-foot. All of these cables continue to work with the Note 8 on Android Auto, SYNC 3.
My assumption is this is a new ore revised USB security or access setting embedded somewhere I am unable to locate in the Note 10+ settings/software.
I also tried disabling DEX as that is something new that notifies when connecting USB on the Note 10+ and I figured it might be a conflict with other USB connectivity. No luck there either.
My Note 8 continues to work fine. I am even able to run a Hotspot on the Note 10 + feeding the Note 8 via Wi-Fi connected directly to the USB in the vehicle and that works.
Nothing works on the Note 10+ directly connected to the vehicle via USB with Android Auto and it sounds like it was a problem with the Note 9 and other phones also.
It's frustrating how everything could change so drastically with a new phone release.
I just want Android Auto to work on my new $1100.00 SAMSUNG FLAGSHIP PHONE Note 10+ like it did with my previous SAMSUNG FLAGSHIP PHONE Note 8 ...
Based on all of the previous posts, it appears to be a big problem and I'm sure the others posting have not found resolution, unless they are just not following up with a post.
FYI, Andoid Auto works perfectly on my Note 10 + (and it also worked on my previous Note 8). Using wired set up to 2017 GMC. (And it did work when Dex was on my phone, and it also works now with Dex disabled.)
Thanks
Thanks for responding. Might be a Ford SYNC 3 thing as that appears to be the difference.
tsells said:
FYI, Andoid Auto works perfectly on my Note 10 + (and it also worked on my previous Note 8). Using wired set up to 2017 GMC. (And it did work when Dex was on my phone, and it also works now with Dex disabled.)
Click to expand...
Click to collapse
Frank 8252019 said:
Thanks for responding. Might be a Ford SYNC 3 thing as that appears to be the difference.
Click to expand...
Click to collapse
I believe (I could be wrong) FORD SYNC 3 is Microsoft (back end).
I had no issues on the S10+ so I can't blame One UI . Tried power settings tried to change USB settings (won't let me when connected to the head unit)
Will try power settings next
My AA works with my Chevy Redline no issues

Categories

Resources