Q&A for [ROM][4.4.2][KOREAN VARIANTS] Sling v2.2.2
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][4.4.2][KOREAN VARIANTS] Sling v2.2.2. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
can anyone please make a video tutorial. it will be very helpful for a newbie.
SLing
ủng hộ hàng việt nam
Sensors not working
I have F180L and after update from korean jellybean sensors stopped working. Rotation of the screen not working. Baseband flashed to right version. Did resets, wipes. I have no idea what happens. Somebody have a solution for that ?
abc-cpu said:
I have F180L and after update from korean jellybean sensors stopped working. Rotation of the screen not working. Baseband flashed to right version. Did resets, wipes. I have no idea what happens. Somebody have a solution for that ?
Click to expand...
Click to collapse
You Should be on Stock KitKat 30C is recommended..
Restore backup and OTA to Latest.
Or Flash Stock ROM..
Then flash Sling 2.2.2
Murshad007 said:
You Should be on Stock KitKat 30C is recommended..
Restore backup and OTA to Latest.
Or Flash Stock ROM..
Then flash Sling 2.2.2
Click to expand...
Click to collapse
Of course it was done and unfortunely without success.
i have f180k,
should i install the patch after install the beta sling version?
thanks
---------- Post added at 03:46 PM ---------- Previous post was at 02:46 PM ----------
wont reboot on my f180k,,,
Murshad007 said:
You Should be on Stock KitKat 30C is recommended..
Restore backup and OTA to Latest.
Or Flash Stock ROM..
Then flash Sling 2.2.2
Click to expand...
Click to collapse
Hello bro, the procedure would be the same to install the Sling v3.0? Because I try to install over the KitKat Stock E977-Brazil and are stuck on the logo or I get "Error Boot Security", thanks in advance.
Milos Rea said:
Hello bro, the procedure would be the same to install the Sling v3.0? Because I try to install over the KitKat Stock E977-Brazil and are stuck on the logo or I get "Error Boot Security", thanks in advance.
Click to expand...
Click to collapse
Boot loader must be locked for 3.0
Sent from My LG G Flex LG-F340K Stock KitKat V20D in LTE Network using XDA Free Mobile app
3.0 a big things )
Murshad007 said:
Boot loader must be locked for 3.0
Sent from My LG G Flex LG-F340K Stock KitKat V20D in LTE Network using XDA Free Mobile app
Click to expand...
Click to collapse
Thanks, but i found a way to install the ROM at E976 (E977 and E987 also) (4.4.2 or 4.1.2) steps would be (Thanks to Alejandro VC for help):
- Backup of IMEI and Módem
- Flash the firmware 4.4.2 v30c F180L
- Root (with Towelroot)
- Install Freegee, then open and install CWM Recovery (not unlocked bootloader)
- Reboot in Recovery Mode
- Full Wipe
- Install the ROM (v3.0)
- Install Patch v3.1
- Reboot
Cheers. :good:
Good Job ^^ ủng hộ bác
---------- Post added at 04:53 PM ---------- Previous post was at 04:43 PM ----------
Sling Rom 3.0 flashes fine on e975 but it doesnot boot after flashing the rom. Developer quotes it requires a locked bootloader.
It actually requires a stock 20c kernel of e975 to be flashed after installation.
so i tried by flashing solid kk kernel but still it didnt boot.
To get this rom to boot up on unlocket bootloader follw this simple procedure.
you have to be on stock rom or custom stock rom with unmodified kernel.
1.Install philz Recovery.
2.Backup the current stockrom.
3.Do a factory reset.(clean to install a new rom in philz recovery)
4.Install the rom.
5.Uncheck the reboot now in the aroma installation at the end.
6.Go to custom restore option in the recovery and restore only boot img.(tick only boot and then start custom restore)
7.After restoring boot do a factory reset(dont click on "clean to install rom", Just a normal factory reset)
8.Reboot now.
Now you will have sling Rom booting up with unlocked bootloader.
Click to expand...
Click to collapse
Here
goo.gl/Por8WI
Is the 20c kernel different to 20a and 20b?
Milos Rea said:
Thanks, but i found a way to install the ROM at E976 (E977 and E987 also) (4.4.2 or 4.1.2) steps would be (Thanks to Alejandro VC for help):
- Backup of IMEI and Módem
- Flash the firmware 4.4.2 v30c F180L
- Root (with Towelroot)
- Install Freegee, then open and install CWM Recovery (not unlocked bootloader)
- Reboot in Recovery Mode
- Full Wipe
- Install the ROM (v3.0)
- Install Patch v3.1
- Reboot
Cheers. :good:
Click to expand...
Click to collapse
Done this on e975 and choose f180L in aroma... boot succesfully but no signal. Try kitkat baseband v20b, reboot, restore efs, reboot...baseband v20a, reboot.... but no luck :/
Then try same method but choose e975 version in aroma and no boot -> black screen after google logo.
any solution?
about sling 3.1 for lg f180
Hello
I am using sling 3.1 but knock on(knock knock) is not working. Could you please help me, what should i do?
Wireless storage and Bluetooth
In sling 3.0 the wireless storage is not shown in the "share and connect" while it works perfectly from the notification drawer but when you go to Settings>Share and Connect there is no wireless storage.. also when 2 devices have sling rom, the bluetooth doesn't connect... it works perfectly with other devices though
The bluetooth issue was in sling 2.1 and 2.2 too
My lg f180k not rebooting after installing sling 3.0
Lg OG is not rebooting when I installed sling 3.0 and google animation shows and then again black screen... previously I was using sling 2.2.2 and no issue was there... please HELP. Thanx.
SheryCool said:
Lg OG is not rebooting when I installed sling 3.0 and google animation shows and then again black screen... previously I was using sling 2.2.2 and no issue was there... please HELP. Thanx.
Click to expand...
Click to collapse
I resolved this issue.. In my phone's about section, it was showing my phone was 180K but if you install THE F180L file then there will be no problem at all.. Thanks for this awesome Rom.. Cheers
SheryCool said:
I resolved this issue.. In my phone's about section, it was showing my phone was 180K but if you install THE F180L file then there will be no problem at all.. Thanks for this awesome Rom.. Cheers
Click to expand...
Click to collapse
Then, your phone might be F180L actually..
Why not U checked it with UR IMEI. That which KDZ file its Downloading..
Any how IF F180L is booting up. Enjoy it
Sent from My LG G Flex LG-F340K Stock KitKat V20D in LTE Network using XDA Free Mobile app
Murshad007 said:
Then, your phone might be F180L actually..
Why not U checked it with UR IMEI. That which KDZ file its Downloading..
Any how IF F180L is booting up. Enjoy it
Sent from My LG G Flex LG-F340K Stock KitKat V20D in LTE Network using XDA Free Mobile app
Click to expand...
Click to collapse
Hmm.. Maybe but i think its K model.. Anyhow if someone gets lucky with it and boots up the device then its great right!! Btw thanx
Related
Hi All,
I wish to start a new thread for LG Optimus E615 with the hope that 615 users will get help from XDA colleagues for unlocking the boot loader, install custom recover, kernel and ROM. I am not a developer, so sorry for my ignorance if I type anything funny.
We have a good rooting guide for 615 written by XxXKINGMAKXxX @ http://forum.xda-developers.com/showthread.php?t=2098550 . A lot of thanks to him. I have seen dedicated pages for LG 610 and 612 in XDA for unlocking the boot loader and for custom recrovery and ROM that support overclocking and other features.
I welcome help from everyone those wish to assist us.
Regards,
GG
After rooting using the link you provided, you have instructions in this thread - http://forum.xda-developers.com/showthread.php?t=2163698 - to unlock bootloader and install CWM recovery. There is a link there with specific E615 files for bootloader unlocking.
nundoo said:
After rooting using the link you provided, you have instructions in this thread - http://forum.xda-developers.com/showthread.php?t=2163698 - to unlock bootloader and install CWM recovery. There is a link there with specific E615 files for bootloader unlocking.
Click to expand...
Click to collapse
Thanks for your reply.However a reboot loop issue has be reported from many guys and the fix for the reboot issue is to install the unofficial firmware by Chacha_Ivanov, Right? I believe Chacha_Ivanov firmware is only for E610 / 612 right? 615 is dual SIM and will it be suitable? Or just wanted to know whether the reboot loop issue is there with E615 official firmware?
Regards,GG
I found an active discussion in 4PDA.ru regarding E615 kernel, ROM. .. here goes the translated page http://translate.google.com/transla...da.ru/forum/index.php?showtopic=396754&st=520
Follow the guide by ldeleeuw on http://forum.xda-developers.com/showthread.php?t=2163698 to unlock the boot loader and installa custom recovery. It is working fine with my e615.
Would any of this work on E617G ? And I couldnt locate any flashable roms for the Optimus. Any pointer?
Thank you!
Sent from my LG-E617G using xda app-developers app
sebtes said:
Would any of this work on E617G ? And I couldnt locate any flashable roms for the Optimus. Any pointer?
Thank you!
Sent from my LG-E617G using xda app-developers app
Click to expand...
Click to collapse
So far I did not see any thing for 617 model. However there are tutorials available for Rooting, Unlocking boot loader and installing CWM recovery..
Link2SD
Guys,
i rooted my phone ( E615 ) and tried to follow this thread for moving apps to SD card : http://forum.xda-developers.com/showthread.php?t=1476121
but at step D, when says to copy attached file ( link2sd.apk ) to system/app root, i dont find this address in my phone !!!
what should i do ?
where should i install it to be installed as system app ( not user app ! as mentioned in that topic )
tried following the steps provided yet I'm stuck on cyanogen boot animation
did anyone successfully installed the CM rom for e610 on Lg E615?
Anyway the Official Jellybean Update for Lg E610 is already available. Why not on Lg E615?
ganeshg1982 said:
Follow the guide by ldeleeuw on http://forum.xda-developers.com/showthread.php?t=2163698 to unlock the boot loader and installa custom recovery. It is working fine with my e615.
Click to expand...
Click to collapse
after you installed the custom recovery were you able to install a custom rom? what version of CWM did you install?
:cyclops:thread starter any updates? seems no cm for e615
notification LED
Guys, is there any solution ( any app ) to use front keys back light as notification LED for missed calls and sms ... ?!!
LG E615 Custom Rom Pls
Hi!!
Is there a Custom rom for LG E615
Pls can somebody do a custom ROM for this device???
Thanks,
Vino
jelly bean?
L5 single sim version has already got official jelly bean. Can anybody who knows to do alter it and make it work on L5 dual?
Thanks in advance.
hisushrutha said:
L5 single sim version has already got official jelly bean. Can anybody who knows to do alter it and make it work on L5 dual?
Thanks in advance.
Click to expand...
Click to collapse
Seems no one is cooking a custom rom for this type of phone. Ive' been constantly checking for the jellybean update but it seems no update for LG E615. I regret buying this phone.
---------- Post added at 04:07 PM ---------- Previous post was at 03:45 PM ----------
ganeshg1982 said:
Follow the guide by ldeleeuw on http://forum.xda-developers.com/showthread.php?t=2163698 to unlock the boot loader and installa custom recovery. It is working fine with my e615.
Click to expand...
Click to collapse
are you sure this is working on lg e615?
there is a new firmware for E615, version V20D, seems to be android 4.1.
have you tried it ?
i tried it using kdz uploader, but cant flash phone with this firmware, it gives error in kdz at last ... so i had to reflash my last version, V10n
sure?
thanks. got it installed. now my phone runs on android 4.1.2 jellybean
ronyang said:
thanks. got it installed. now my phone runs on android 4.1.2 jellybean
Click to expand...
Click to collapse
you mean you installed V20D on your e615 using KDZ and it's working ?? if so, can you indicate the tutorial you followed please ? thanks a lot !
I just used KDZ updater and I never encountered any problem at all.
Hello Guys,
Check below post on LGVIET. A custom rom for E980 specially.. Enjoy.. :good: :victory:
All links removed as per request by Hoangnova. . Please wait for further instructions...
Procedure :
1.Flash the stock 4.4.2 for on E980 (V20g)
(its a must or u may end up having low storage or brick the phone)
2.Install Root
3.Install recovery
4.Goto recovery and wipe data/Cache/Dalvik Cache
5.Flash ROM and perform wipes again..
6.Reboot and enjoy
First boot will take time.. so be patient..
Screenshot below :
mandarjoshiin said:
Hello Guys,
Check below post on LGVIET. A custom rom for E980 specially.. Enjoy.. :good: :victory:
http://lgviet.com/forum/threads/sphinx-e980-v1-6-kitkat-4-4-2-danh-rieng-cho-lg-gpro-e980.20597/
Procedure :
1.Flash the stock 4.4.2 for on E980 (V20g)
2.Install Root
3.Install recovery
4.Goto recovery and wipe data/Cache/Dalvik Cache
5.Flash ROM and perform wipes again..
6.Reboot and enjoy
First boot will take time.. so be patient..
Click to expand...
Click to collapse
hello mandarjoshin,
Due to soft brick, I flashed my e980 US model with a e988 Hongkong JB stock KDZ coz i always get an error in tot flashing.
Currently, Im in stock JB e988 rom in my e980 smartphone.
Would the OP rom be safe for me to flash?
souleater11 said:
hello mandarjoshin,
Due to soft brick, I flashed my e980 US model with a e988 Hongkong JB stock KDZ coz i always get an error in tot flashing.
Currently, Im in stock JB e988 rom in my e980 smartphone.
Would the OP rom be safe for me to flash?
Click to expand...
Click to collapse
Hi Bro,
You can use the latest LG Flashtool 1.8 and the latest .tot file. It works flawlessly.. I'd recommend not to flash this Rom on ur current rom as the base of this rom is E980.
This ROM has also European Languages .Very nice. I removed the modem.img from zip and flashed it on my E986. I did a factory reset in recovery and format system and wipe dalvik cache and than install zip from external SD in CWM 6.0.4.8. The External SD card is working. Fotos and downloads remained on internal storage. Also speakerphone is working in a call. Awesome Finally a fully working LG 4.4 2 KitKat with Dutch language.
Planet X said:
This ROM has also European Languages .Very nice. I removed the modem.img from zip and flashed it on my E986. I did a factory reset in recovery and format system and wipe dalvik cache and than install zip from external SD in CWM 6.0.4.8. The External SD card is working. Fotos and downloads remained on internal storage. Also speakerphone is working in a call. Awesome Finally a fully working LG 4.4 2 KitKat with Dutch language.
Click to expand...
Click to collapse
Yup.. This is by far the best rom (in terms of bugs) we have.. Enjoy.. :good:
mandarjoshiin said:
Yup.. This is by far the best rom (in terms of bugs) we have.. Enjoy.. :good:
Click to expand...
Click to collapse
Using it for last four days and so far so good, one user complained of battery drain, hoping that it might be a sporadic event as every thing is working like a charm
Planet X said:
This ROM has also European Languages .Very nice. I removed the modem.img from zip and flashed it on my E986. I did a factory reset in recovery and format system and wipe dalvik cache and than install zip from external SD in CWM 6.0.4.8. The External SD card is working. Fotos and downloads remained on internal storage. Also speakerphone is working in a call. Awesome Finally a fully working LG 4.4 2 KitKat with Dutch language.
Click to expand...
Click to collapse
can i ask you what modem do you use instead on the rom.
thanks
bijandoroudian said:
can i ask you what modem do you use instead on the rom.
thanks
Click to expand...
Click to collapse
My modem is still stock I guess. It is APQ8064/MDM9x15M. It has worked on all CM and earlier Sphinx versions.
Hi, I dont understand wich file I must download. My Vieatnemeze is too bad (actualy negative value).
Please provide any translation in OP, I'm so confused.
I can't download the DLL file http://lgviet.com/forum/threads/tong-hop-root-recovery-lg-e980-kitkat.19251/ and I don't understand how to unlock and root the 4.4.2.
Thank's!
jorrddan said:
Hi, I dont understand wich file I must download. My Vieatnemeze is too bad (actualy negative value).
Please provide any translation in OP, I'm so confused.
I can't download the DLL file http://lgviet.com/forum/threads/tong-hop-root-recovery-lg-e980-kitkat.19251/ and I don't understand how to unlock and root the 4.4.2.
Thank's!
Click to expand...
Click to collapse
Hi, why r u checking the Viet site u can check xda to get the stock ATT 4.4.2 and how to root 4.4.2. Check Xitrom post in development section only and get the recovery mentioned there..
Sent from my LG Optimus G Pro E980
Hi D/led SphinX_E980_1.6_update.zip from lgviet site. 1.8gb.(is this correct one?)
Im on ATT stock KK 4.4.2 Rooted.
Software ver. is E98o20g
Baseband is APQ806/MDM9x15M
Kernal 3.40
My CM Recovery Version is V6.0.4.7
So I can just flash the Zip straight up?
is My Recovery work or i need different version to flash?
jonahy said:
Hi D/led SphinX_E980_1.6_update.zip from lgviet site. 1.8gb.(is this correct one?)
Im on ATT stock KK 4.4.2 Rooted.
Software ver. is E98o20g
Baseband is APQ806/MDM9x15M
Kernal 3.40
My CM Recovery Version is V6.0.4.7
So I can just flash the Zip straight up?
is My Recovery work or i need different version to flash?
Click to expand...
Click to collapse
Hi,
Yes u can go ahead with this recovery... if doesn't work.. Try this
http://www.mediafire.com/download/rr...5-Recovery.zip
But it should work.. Enjoy.. Report back once u r done.. :good:
mandarjoshiin said:
Hi,
Yes u can go ahead with this recovery... if doesn't work.. Try this
http://www.mediafire.com/download/rr...5-Recovery.zip
But it should work.. Enjoy.. Report back once u r done.. :good:
Click to expand...
Click to collapse
Hi Thanks for the quick reply.
that mediafire link its no good "Invalid or Deleted File."
I'm running radeonmaya's KK, do i have to flash the stock AT&T first? this rom looks pretty sweet! Another question, is viperforandroid working with this rom?
Yes, from stock other wise you would brick the phone
Sent from my LG-E980 using Tapatalk
luisoman2000 said:
I'm running radeonmaya's KK, do i have to flash the stock AT&T first? this rom looks pretty sweet! Another question, is viperforandroid working with this rom?
Click to expand...
Click to collapse
Yes.. plz do flash AT & T stock Rom first.. radeonmaya is based on F240 so ur phone would brick. And yes viperforandroid should work.. test n reply.. :thumbup:
Sent from my LG Optimus G Pro E980
mandarjoshiin said:
Yes.. plz do flash AT & T stock Rom first.. radeonmaya is based on F240 so ur phone would brick. And yes viperforandroid should work.. test n reply.. :thumbup:
Sent from my LG Optimus G Pro E980
Click to expand...
Click to collapse
Does it have to be a tot flash or will the flashable version from the forum would do the trick?
Sent from my LG-E980 using Tapatalk
mandarjoshiin said:
Hi Bro,
You can use the latest LG Flashtool 1.8 and the latest .tot file. It works flawlessly.. I'd recommend not to flash this Rom on ur current rom as the base of this rom is E980.
Click to expand...
Click to collapse
This is easier said than done, but i always got an LG Flash Tool error saying that my device is wrong.
LG Mobile Tool Support currently recognize my phone as e988 coz i flashed a stock JB e988 hongkong KDZ.
By default, i think LG Flash Tool does not work for OG Pro International variants
Has anyone by pass this error.
Sent from my SGH-T959 using XDA Free mobile app
luisoman2000 said:
Does it have to be a tot flash or will the flashable version from the forum would do the trick?
Sent from my LG-E980 using Tapatalk
Click to expand...
Click to collapse
Flashable version would do it for you.. make sure u do all the necessity wipes..
Sent from my LG Optimus G Pro E980
souleater11 said:
This is easier said than done, but i always got an LG Flash Tool error saying that my device is wrong.
LG Mobile Tool Support currently recognize my phone as e988 coz i flashed a stock JB e988 hongkong KDZ.
By default, i think LG Flash Tool does not work for OG Pro International variants
Has anyone by pass this error.
Sent from my SGH-T959 using XDA Free mobile app
Click to expand...
Click to collapse
Have u tried with the latest LG flashtool v1.8??
Sent from my LG Optimus G Pro E980
Q&A for [ROM][Jan 19] -=- CloudyCat6 1.0 -=- [F460S/L/K]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][Jan 19] -=- CloudyCat6 1.0 -=- [F460S/L/K]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Thank you
How to root F460 android 5.0.x
From 5.0.1 official ------>to-----> CloudyCat6 ¿?
Hello, how I can apply CloudyCat6 in my G3 if I upgrade the phone to 5.0.1 via official? , I know that in 5.0.1 can not be root or install the Rcovery , please help , by the way, thank you very much for your great contribution!!! I was waiting for this!! You Rock!!
---------- Post added at 07:55 PM ---------- Previous post was at 07:50 PM ----------
Hello, how I can apply CloudyCat6 in my G3 if I upgrade the phone to 5.0.1 via official? , I know that in 5.0.1 can not be root or install the Rcovery , please help , by the way, thank you very much for your great contribution!!! I was waiting for this!! You Rock!!
You should downgrade to kitkat first and install the recovery from there then flash this rom
Sent from my LG-F460S using XDA Premium 4 mobile app
Done!
Falcon51 said:
You should downgrade to kitkat first and install the recovery from there then flash this rom
Sent from my LG-F460S using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thank you brother, it's done. I have now CloudyCat6 installed in my F460K, it is a great rom, I installed a Recovery too, but the only problem I see is that G3 TweaksBox doesnt run because lollipop... nothing is perfect
Missing usb tethering, anyone got it?
Is there any solution for the stock 2k videos ? It won't open(license expired)
Sent from my LG-F460S using XDA Premium 4 mobile app
Installed everything and it is all working well. I tried installing CWM (the version found at http://forum.xda-developers.com/lg-g3/development/cwm-recovery-6-0-5-0-f460s-l-k-t2874916) but it is not able to boot into recovery. Is there any possibility for a fix for this? The only way to install certain features is by flashing zips.
after install this rom cannot go into the CWM Recovery & default Recovery too.
Than God found you!!!!!!!!!!!!!!!!
MANY THANKS SIR! Ive been waiting a century for this!
cant boot to recovery
I cant seem to access recovery after inatallation.. Is there anyway?
How to root and flash recovery lg g3 cat 6.
How to root and flash recovery lg g3 cat 6.
please help
lastdev said:
How to root and flash recovery lg g3 cat 6.
please help
Click to expand...
Click to collapse
If youre running on stock Lollipop, you have to flash a Kitkat .TOT and .DLL of your model version via LG flash tool, Root, Install a recovery(CWM), then flash this Rom.
:fingers-crossed:
The help is here!!
lastdev said:
How to root and flash recovery lg g3 cat 6.
please help
Click to expand...
Click to collapse
KitKat to CloudyCat6 do this
Root with Stump-v1.2.0.apk------->install and reboot
Recovery with RecoveryInstaller_F460-v1.0_AnZhi.apk------->Install and Reboot into Recovery mode
Flash from Sd the CloudyCat6
done, enjoy.
Lollipop to CloudyCat6 do this
Downgrade to kitkat stock firmware (search LGF460KAT-00-V10i-KT-KR-AUG-18-2014+0.kdz) with the Lg Flash Tool
Root with Stump-v1.2.0.apk------->install and reboot
Recovery with RecoveryInstaller_F460-v1.0_AnZhi.apk------->Install and Reboot into Recovery mode
Flash from Sd the CloudyCat6
done, enjoy.
--------------->ONLY FOR LG G3 F460K<----------- Be Aware!!
manowar24 said:
Thank you brother, it's done. I have now CloudyCat6 installed in my F460K, it is a great rom, I installed a Recovery too, but the only problem I see is that G3 TweaksBox doesnt run because lollipop... nothing is perfect
Click to expand...
Click to collapse
How did you root your F460?
It is very simple, use this app: "Stump Version 1.2.0" install the apk, choose use brute force metod, reboot when finish, then you must install the supersu app in the playstore, its free, thats all brother.
Sent from my LG-F460K using XDA Free mobile app
Thanks!
[/COLOR]
manowar24 said:
It is very simple, use this app: "Stump Version 1.2.0" install the apk, choose use brute force metod, reboot when finish, then you must install the supersu app in the playstore, its free, thats all brother.
Sent from my LG-F460K using XDA Free mobile app
Click to expand...
Click to collapse
Do you manage to root last 20e lollipop for the F460?
Sent from my LG-F460S using XDA Free mobile app
manowar24 said:
KitKat to CloudyCat6 do this
Root with Stump-v1.2.0.apk------->install and reboot
Recovery with RecoveryInstaller_F460-v1.0_AnZhi.apk------->Install and Reboot into Recovery mode
Flash from Sd the CloudyCat6
done, enjoy.
Lollipop to CloudyCat6 do this
Downgrade to kitkat stock firmware (search LGF460KAT-00-V10i-KT-KR-AUG-18-2014+0.kdz) with the Lg Flash Tool
Root with Stump-v1.2.0.apk------->install and reboot
Recovery with RecoveryInstaller_F460-v1.0_AnZhi.apk------->Install and Reboot into Recovery mode
Flash from Sd the CloudyCat6
done, enjoy.
--------------->ONLY FOR LG G3 F460K<----------- Be Aware!!
Click to expand...
Click to collapse
hi. u seem to be happy with this rom is there any CWM available for this one. actually i am using this rom and trying to reset the phone. (factory data reset) but it does not work? any ideas
Hi, how are you?
Thank you so much for this rom, I'm really enjoying it.
I'm missing recovery but that's ok.
May I ask, how can I make the navigation buttons look like Lollipop?
Thank you so much again.
Best wishes, HFoletto.
Update LG GPro F240K (Korean) to Lollipop 5.0.1 with ROOTED and Fixed All Korean:
* Download link: https://www.youtube.com/edit?o=U&video_id=YTOFHkFJrEc
* Flash by Custom Recovery - TWRP
* Based on official firmware F240K30D
* Android version 5.0.1 (Lollipop)
* Fixed dial pad (no Korean) with Call Record
* Removed all Korean Apps.
* Default language: ENGLISH (GB)
For LG-F240L and LG-F240S coming soon...
Facebook: https://www.facebook.com/pages/LG-Optimus-G-PRO/886760358040770
supported devices..???
WINMACK.COM said:
Update LG GPro F240K (Korean) to Lollipop 5.0.1 with ROOTED and Fixed All Korean:
* Download link: https://www.youtube.com/edit?o=U&video_id=YTOFHkFJrEc
* Flash by Custom Recovery - TWRP
* Based on official firmware F240K30D
* Android version 5.0.1 (Lollipop)
* Fixed dial pad (no Korean) with Call Record
* Removed all Korean Apps.
* Default language: ENGLISH (GB)
For LG-F240L and LG-F240S coming soon...
Facebook: https://www.facebook.com/pages/LG-Optimus-G-PRO/886760358040770
Click to expand...
Click to collapse
link for download?
doesn't work : https://www.youtube.com/edit?o=U&video_id=YTOFHkFJrEc
Pilaf said:
link for download?
doesn't work : https://www.youtube.com/edit?o=U&video_id=YTOFHkFJrEc
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=YTOFHkFJrEc
On uploading...
ATENCIO77 said:
supported devices..???
Click to expand...
Click to collapse
It is for Korean F240K only at the moment.
Its working on 240L?
Sent from my LG-F240L using XDA Free mobile app
khan.28885 said:
Its working on 240L?
Sent from my LG-F240L using XDA Free mobile app
Click to expand...
Click to collapse
Not yet... For now, it is only for F240K.
Hey guys I have flashed a f240k ROM on my f220k and it has worked in the past without any issues but today it left my phone only booting into recovery so I tried to restore a backup and it still boots into recovery so I figured that I should just use my old version of the lg flash tool and flash a KitKat DLL and TOT but in the past when I would try to use the flash tool I would have to change the date of my computer to any date before august 2012 and I would be able to get past the id and password login but now it doesn't work , I know there's a guide to flash to stock using thenlg flash tool 2014 method but I can't find a kdz for my phone on the net and I'm not sure if it would actually fix my phone any ideas or any idea how I could just use the old lg flash tool I prefer this method... Thanks
Never mind I found out that I needed to replace the megalock.DLL and boom it opened the lg flash tool whoop whoop
Password?
Waxim1 said:
Not yet... For now, it is only for F240K.
Click to expand...
Click to collapse
I have emailed the people who posted this password-locked firmware
asking
Can you provide the password to open the 7z please?
this is the reply
"this firmware has been sold to the phone shop."
From the looks of the very lengthy video, this is the same procedure that is described elsewhere
but the poster wishes to gain in some way by selling the slightly customised firmware.
The stock korean rom can be rooted and runs some xposed modules .. recording and everything works
god, do you really need to password a freaking rom based on STOCK?!!
not looking at this thread again
Can you make post a F240K ROM rooted without the Korean apps removed? I have an F240K in Korea and want to keep the Korean apps, but have root.
Firmware is password locked. There's an easy method to root the original stock ROM
tanclo said:
Firmware is password locked. There's an easy method to root the original stock ROM
Click to expand...
Click to collapse
How? Please tell us.
JaySee5 said:
How? Please tell us.
Click to expand...
Click to collapse
downgrade to kitkat, root the kitkat
Find the vietnamese rom link from this link here (use flashget)
http://sccn.vn/threads/rom-va-root-5...-f240lsk.8575/
save this recovery and the vietnamese zip lollipop rom to your phone
https://yadi.sk/d/JSASDovUfGu6D
save also this superuser to your phone https://yadi.sk/d/W7G1L0exfGuBn
run the script from the second folder of this zip
https://yadi.sk/d/fESs_CYbfGu4f
hit any key when you see prompt in pc terminal,
allow superuser from the phone,
You will enter recovery eventually,
flash the cantata recovery.zip
flash the loillipop.zip
flash the superuser zip
lokify verification will fail
it's ok.
enter the rom and set it up
then make sure root works
run the alma second folder again.. you should check cantat recovery is flashed again, reboot recovery and see if lokify verification passes
you can use alpha 2 of exposed and i use burnt toast and gravitybox
most of the features on gravitybox work well including pie and status bar, batter bar, etc.
unicon also works
Thread closed. @WINMACK.COM please produce new download links, the given link is not working. Also make sure that it is not password protected or provide the password along with the download links.
Thanks!
Hello everyone, after i updated my E975 to 6.0.1 i found out that ui had no sensor response whatsoever, except for proximity and brightness, so i decided to investigate.
I did a comprehensive search of the forums since the old 4.4.2 times and found out this could be caused by a corruption / overwrite of some stock information, stored into persist, and sns partitions, which controls the sensors.
Everyone found a solution by reflashing stock KDZ, but i did not want to lose precious time by wiping and having to flash / root / restore my poor device.
Reading from my own partition table, the partitions are mapped at:
Code:
sns -> /dev/block/mmcblk0p16
persist -> /dev/block/mmcblk0p26
I wrote a modified version of this script (from @autoprime), and got a dump of @cabe2001 's partitions, which i then flashed on my device, only to find out that as i thought, it works! No more AxxionKat / Resurrection Remix / KDZ flashing to restore rotation!
I wrote a new recovery script, which flashes the uncorrupt partitions over the broken ones, just flash, reboot and voilà, sensors are working again!
In the attachments you'll also find the script to backup, if you want to keep a copy of your own ones before flashing!
It works flawlessly on E975, but i think it should work also on other GEE/GEEHRCs, just make sure to take a backup of your own ones before trying out!
Thanks again @cabe2001 for the working dump
I'm using CM12.1 from @Kevinjoa and my sensors works OK, here are my images.
cabe2001 said:
I'm using CM12.1 from @Kevinjoa and my sensors works OK, here are my images.
Click to expand...
Click to collapse
Thanks! now trying!
EDIT: as supposed, it works just fine! Going to make a flashable zip for everyone having sensors issues!
Thanks a lot. Were on GEEHRC AOSP from DevSwift1, thought my proximity sencor was broke. Fixed that flashing your script.
Great job!
Thanks a lot
Congratulations for your job !
Nice work man, saving lives.
@blackbird5308 This should be a sticky in dev section. Well done
nchc said:
@blackbird5308 This should be a sticky in dev section. Well done
Click to expand...
Click to collapse
Well, technically no dev action was made, just some scripting and a dump of stock partitions. I would not say it deserves a sticky, it's just here for people who need it
Nice finding. Thanks for sharing.
I need help from the holder F180l to send its own backup running because your still not working sensor on my phone :crying:
Some one plz fix the no service error am using f180k only signals are working on 4.4.4 not in cm12 or 6.0.1 sensore works perfectly
kriss1245 said:
I need help from the holder F180l to send its own backup running because your still not working sensor on my phone :crying:
Click to expand...
Click to collapse
What rom are you running? i don't think there should be any difference from E975, but i can try and make a version for F180, if someone provides me a working dump!
blindsh3ll said:
Some one plz fix the no service error am using f180k only signals are working on 4.4.4 not in cm12 or 6.0.1 sensore works perfectly
Click to expand...
Click to collapse
I think your issue is not related at all with the one described here. Did you flash a compatible E975 modem before flashing any rom?
EDIT: you should really try this http://forum.xda-developers.com/showthread.php?t=2792877
i am using ressurection remix6.0.1 on my f180l and my rotation sensor doesnt work,help me.thank you
cabe2001 said:
I'm using CM12.1 from @Kevinjoa and my sensors works OK, here are my images.
Click to expand...
Click to collapse
blackbird5308 said:
I think your issue is not related at all with the one described here. Did you flash a compatible E975 modem before flashing any rom?
EDIT: you should really try this http://forum.xda-developers.com/showthread.php?t=2792877
Click to expand...
Click to collapse
Nope I didn't flash any modem before any rom
I am using lg f180k kdz flashed f180k then root change the name or f180k to e975 using file explorer then flash recovery using freegee after that flash twrp 2.8.7.0 and then flash sling g akahroba everything works fine but when I try to flash cm12 cm13 lollipop or marshmallow no signal
blindsh3ll said:
Nope I didn't flash any modem before any rom
I am using lg f180k kdz flashed f180k then root change the name or f180k to e975 using file explorer then flash recovery using freegee after that flash twrp 2.8.7.0 and then flash sling g akahroba everything works fine but when I try to flash cm12 cm13 lollipop or marshmallow no signal
Click to expand...
Click to collapse
Well, then look at the thread i linked up there, and repeat the conversion process
shahbazz94 said:
i am using ressurection remix6.0.1 on my f180l and my rotation sensor doesnt work,help me.thank you
Click to expand...
Click to collapse
As i wrote in my previous reply i don't have any working F180 sensor image, i need a working F180 dump to make a flashable, as i only own an E975
Thanks for reply,but I'm new to the forum so I don't know what does dump means
shahbazz94 said:
Thanks for reply,but I'm new to the forum so I don't know what does dump means
Click to expand...
Click to collapse
A 1:1 copy of the partitions from a working phone
does this work on lg f180 l android 5.1
some sensors dont work well in the rom i use
its this rom http://forum.xda-developers.com/optimus-g-intl/orig-development/rom-aosp-5-1-1r8-optimus-g-t3160195