[Q&A] [ROM][4.3.1][TeamCanjica] CyanogenMod 10.2 [BUGFREE] - Galaxy Ace II Q&A, Help & Troubleshooting

Q&A for [ROM][4.3.1][TeamCanjica] CyanogenMod 10.2 [BUGFREE]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][4.3.1][TeamCanjica] CyanogenMod 10.2 [BUGFREE]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

which is the right gapps file?
Hello,
I was preparing to flash this rom and downloaded from the link you gave this version
cm-10.2-20140728-UNOFFICIAL-codina.zip
but now I'm in trouble because, going at the goo.im link,
I don't understand which is the Gapps file that matches best with the above rom
Can you tell me wich one is more suitable
Thanks in advance

Use JB Gapps - these are the lastest on goo.im
https://goo.im/gapps/gapps-jb-20130813-signed.zip
Maybe there are newer ones arround in the net - But please search for yourself if you need it newer...
http://wiki.cyanogenmod.org/w/Google_Apps

Very kind of you, thanks! :good:

tethering not working and no wake up from lockscreen
Hi,
I'm very happy with this ROM but I have a serious (for me) issue with tethering.
Usb tethering procedure simply remains stucked to "obtaining IP address" and then quits.
WiFi tethering shows that the signal is strong but after some time trying to connect it quits
with notification of " deactivated net. Low quality connection"
(sorry if my translation is wrong, but I think you can understand)
I don't think it could be a provider problem because my italian provider (H3G) allows tethering
without limitation, and moreover I had never a problem of tethering with stock rom.
Any clue..?
the other annoying issue is with wake up from lockscreen.
Many times (mostly after a notification) the phone remains with black screen, completely unresponsive to all buttons.
Sometimes it wakes up retrying in few seconds, sometimes I have to reboot.
Suggestions?
By the way I would like to try changing the level of "deep sleep" from default 3 to 4 but I can't remember how to enter to that page in the menu, can you help me?
Thanks in advance, beside these bugs this ROM is wonderful, my phone flies...

Would you be so kind as to release cm-10.2-20140728 for codinaP?
We NFC users are still stuck with the 20140228 release...

GrinningArmor said:
Would you be so kind as to release cm-10.2-20140728 for codinaP?
We NFC users are still stuck with the 20140228 release...
Click to expand...
Click to collapse
Rox (the dev of this) is out of business for the ACE 2 - So I don't think that you/we can expect an updated on this.

1351
GrinningArmor said:
Would you be so kind as to release cm-10.2-20140728 for codinaP?
We NFC users are still stuck with the 20140228 release...
Click to expand...
Click to collapse
My friend installed cm-10.2-20140728 and quicky returned to 20140228 (hes using I8160). I think that our version cm-10.2-20140228-UNOFFICIAL-codinap.zip is fast, stable and bugfree.
Not planing to install CM11.

Anyone noticed that tethering doesn't work correctly?
I mean turn on tethering + mobile data, it's okay until you connect to this wi-fi via PC, then the tethering automatically is being disabled and even trying to turn it back doesn't work, phone reboot required to be able to switch it on but the same situation happens.
I didn't touch anything in this ROM. 2.3.6 GingerBread -> 4.1.2 beta -> 4.1.2 XEO -> 4.3.1 this ROM and after every installation wipe data and cache

Tethering now working
vanometro said:
Usb tethering procedure simply remains stucked to "obtaining IP address" and then quits.
WiFi tethering shows that the signal is strong but after some time trying to connect it quits
with notification of " deactivated net. Low quality connection"
(sorry if my translation is wrong, but I think you can understand)
I don't think it could be a provider problem because my italian provider (H3G) allows tethering
without limitation, and moreover I had never a problem of tethering with stock rom.
Any clue..?
Click to expand...
Click to collapse
I just want to share my experience. Hopefully it will help someone out there, and give feedback to the developers.
I had flashed the latest build (cm-10.2-20140728-UNOFFICIAL-codina.zip) from stock Jelly Bean (XXMF2). I like the ROM very much except I had problem tethering (both WIFI and USB), which is a very important function for me. My problem seems similar to vanometro.
When USB tethered, my laptop connects but it take a long time to acquire network address, finally results in "low or limited connectivity", with no access to the internet. When WIFI tethering, my laptop finds hotspot and successfully authenticates password, but there is no internet access. Same situation when I try to tether to another laptop / desktop / android phone.
On further investigation, I realized that my laptop is not getting the correct network addresses. On manually keying in the correct addresses (took me quite a while to learn how to do this), I finally can access the internet both via USB and WIFI. However, I find it too troublesome to manually key in the network configurations each time I want to tether.
In my limited understanding, I believe the DHCP server in my Ace 2 is not working properly. But I have no idea how to troubleshoot this. Tried clearing cache partition / Dalvic cache / factory reset. Even tried reinstalling the ROM. But no success.
Finally tried installing the previous build (cm-10.2-20140227-UNOFFICIAL-codina.zip), and everything works! Now I can tether by USB and WIFI, no need to manually key in network configurations.
Hopefully this helps someone, and someone more knowledgeable can look into the problem.

Related

[Q] Android 2.3.3 wifi compatability problems in custom roms

hi guys, go easy on me its my first post
love the website the guides have helped me to successfully downgrade, s-off and flash custom roms to my dhd
I searched for the answer to this question but couldnt find anything. Is there any plan for custom rom developers to fix the 2.3.3 rom wifi compatability problems with speedtouch modems, as this is the only reason i cant use 2.3.3 based roms? (a lot of people have this problem with the stock rom but it is also in leedroids new one, android rev. etc) Would like to ask this in the android dev section but i need 10 posts for that.
Thanks for the help you lot have already given me, and i love the video!
Steve
Hi, welcome and congrats on your first post.
What specifically is the problem with the wifi? Is it specific to a type of authorisation (WEP, WPA/2) issue or something else?
thanks
this is a link to a detailed description of this exact problem: http://forum.xda-developers.com/archive/index.php/t-1063103.html
i really dont expect anyone to go through the hassle of reading this, so summarized it says that ever since the gingerbread 2.3.3 update the phone is capable of connecting to all modems, but cannot transfer data on certain ones (such as the speedtouch modems)
I found a good post on this in a german forum a couple of weeks ago but i cant find it now, (i'll keep looking) but it said the problem was that some modems transmit with n and some with b or something like that. and that the only answer was to wait (ages) for a stock rom update (2.3.4?) as 2.3.3 isn't compatible with these types of modems
i would have expected this had been solved in the custom roms though
this is a qoute from the link below
"It turns out the Be Box router which Be supplied, which is a THOMSON ST585v6, is not compatible but also other versions of THOMSON routers as well."
ptth://vvv.htcdesirehdforum.com/htc-desire-hd-troubleshooting/wifi-issue-with-gingerbread-update/ (change the ptth to http and vvv to www) i cant post outside links
Ok, just read through that thread. What model of Speedtouch router are you using?
One workaround is to use a static IP. Have you tried this? I can help you set this up if required.
HTC seem to blame this issue on Google, as an Android issue. Not sure about that as any ROM that uses Gingerbread would exhibit the same problem, which isn't the case.
modem is a Thompson Speedtouch ST585 v6
Thanks but i have already tried and the modem only works with dynamic IPs (tried to solve it with a static IP for ages with my dad but it didnt work xD)
This qoute from dioky on page 4 of the link below states (i'm pretty certain) the problem: (i clicked the thanks button for this answer)
"Hi there,
I have the same WiFi problems as all of you.
Furthermore I can confirm that changing ROM (ARHD or Leedroid) won't help, if you stay with Gingerbread versions, that is.
I found out that:
* Data won't flow (although connected fine) to SpeedTouch WiFi access point (b/g).
* Data won't flow (although connected fine) through D-Link DAP1360 .
* BUT: does flow (and connected fine off course) through Belkin G Plus MIMO access point (g)!
I have rechecked it by reflashing back to ARHD 3.7 returning to ARHD 5.1.7 and ARHD 5.1.4 and LeeDroiD 3.0.3.
Which in all, makes me conclude that there definitely is something on the software side concerning compatibility!
For now, I will return to ARHD 3.7 Android 2.2.1 until solution is found.
Regards,"
http://forum.xda-developers.com/showthread.php?p=13922024
Does anybody know if the Rom devs.plan to solve this (or even know about this problem)?
any ideas peeps?? this is a major problem for me
You want to try giving a static IP another shot?
i'm pretty sure it wont work as i tried to solve the prob like this but whatever i did i couldnt get it to work. but i'll give it another shot. another idea would maybe be updating the modem drivers if there is such a thing?
What is your routers current firmware version? And is that a branded router?
i really have no idea. i'm a total noob with routers
can you tell me an easy way how i could find out?
Sure, are you using your PC to access the web at the minute?
If you install TeamViewer I could show you.
?????? What is that ?
Its a piece of software that will allow me to remotely control a computer.
I can confirm that I have this problem with 2.3.3 and my Thomson/SpeedTouch 585v6 (FW 6.1.4.3) too.
It seems to connect WiFi fine, even assigns an IP but nothing actually works.
Solution for Wifi problem 2.3.3
Hello!
I have the same problem on my DHD with 2.3.3
Before there is an permanent fix for this You could manually configure the IP adress in the phones Wifi and it works great.
You can not use the DHCP in the phone.
it-solutions4u.se said:
Hello!
I have the same problem on my DHD with 2.3.3
Before there is an permanent fix for this You could manually configure the IP adress in the phones Wifi and it works great.
You can not use the DHCP in the phone.
Click to expand...
Click to collapse
I should have mentioned that I actually have a HTC Desire (not HD). But the ROM is a 2.3.3. It actually assigns the IP via DHCP just fine.
I have already tried manually assigning the IP address (and other fields) but still no luck.
There are those who can connect with a manual IP and a few, even after assigning it manually, still can not connect.
i tried using a static IP but it doesnt work..tried for days now
sounds like i am one of the few it doesnt work for after assigning manually...
i am a total noob but i was wondering if it would be possible for a custom rom dev to take the wifi drivers from froyo and use them in a gingerbread based rom??
UPDATE
I called up my ISP requesting a newer firmware for the 585v6 router (although I know it is no longer supported). Anyway, without any hassle at all, they gave me the newer: TG585 v7 router with firmware 8.2.23.0 (pre-installed).
This connects without any problems to my 2.3.3 ROM (RCMix 2.0).

Router crashing with new Jelly Time rom

Hey guys,
I tried searching and could not find a similar problem.
Since getting the new rom I have noticed that my wireless router has been experiencing connection issues. all my devices show connectivity but i dont have access to the net. Anyways i decided to have a look and the android is creating multiple Ip entries on the router with the same mac address and everytime I turn the wifi off on my phone the problem does not occur.
Any ideas?
Thanks
tjturko13 said:
Hey guys,
I tried searching and could not find a similar problem.
Since getting the new rom I have noticed that my wireless router has been experiencing connection issues. all my devices show connectivity but i dont have access to the net. Anyways i decided to have a look and the android is creating multiple Ip entries on the router with the same mac address and everytime I turn the wifi off on my phone the problem does not occur.
Any ideas?
Thanks
Click to expand...
Click to collapse
Have you tried going into development settings and turning of Android Debugging or ADB over network? Just a suggestion, not sure if it will work.
etdude said:
Have you tried going into development settings and turning of Android Debugging or ADB over network? Just a suggestion, not sure if it will work.
Click to expand...
Click to collapse
nah cant be that, I had them turned off already.
Thanks for replying anyway. I searched google and its a pretty common problem with no concrete solution, might need to flash the rom again.
tjturko13 said:
Hey guys,
I tried searching and could not find a similar problem.
Since getting the new rom I have noticed that my wireless router has been experiencing connection issues. all my devices show connectivity but i dont have access to the net. Anyways i decided to have a look and the android is creating multiple Ip entries on the router with the same mac address and everytime I turn the wifi off on my phone the problem does not occur.
Any ideas?
Thanks
Click to expand...
Click to collapse
Why don't you try binding the MAC Address to a static IP so it's no longer able to create multiple entries on the DHCP Table?
tjturko13 - have you tested to use another standard 802.11 Modus - instead "n"? Just switch it at your phone or router.
What router do you have? Can you update the firmware? ^^
Sent from my HTC One X / Desire HD using xda premium
Wolfy9247 said:
Why don't you try binding the MAC Address to a static IP so it's no longer able to create multiple entries on the DHCP Table?
Click to expand...
Click to collapse
i dont think my router allows this, the only option I have is to specify if I want to allow mac filtering.
Have checked out my last post about the wlan-standard?
I found also another thread about a member with wifi problems after updating his rom. He didnt flash the new boot.img - but dont know if it was the solution.
See this thread http://forum.xda-developers.com/showthread.php?t=1831299
Sent from my HTC One X / Desire HD using xda premium
\/\/iLLow said:
Have checked out my last post about the wlan-standard?
I found also another thread about a member with wifi problems after updating his rom. He didnt flash the new boot.img - but dont know if it was the solution.
See this thread http://forum.xda-developers.com/showthread.php?t=1831299
Sent from my HTC One X / Desire HD using xda premium
Click to expand...
Click to collapse
thanks ill check out that thread,
at the moment my router is set to just g
its a isp provided cablel router that does not let me mess around with FW but i have checked and it seems to have the latest FW
where do i get the boot.img file from?
Did you get your new rom over the air? (Stock rom)
Or did you flash a custom rom?
You have to give us more software informations about your rom. Is your device s-on or s-off?
Stock rom you need the right RUU exe file. Just doubleclick - yes yes yes
Custom rom you need to download the custom boot.img.
\/\/iLLow said:
Did you get your new rom over the air? (Stock rom)
Or did you flash a custom rom?
You have to give us more software informations about your rom. Is your device s-on or s-off?
Stock rom you need the right RUU exe file. Just doubleclick - yes yes yes
Custom rom you need to download the custom boot.img.
Click to expand...
Click to collapse
sorry willow
I have the jelly time rom beta 10
s-off
and have also flashed the kernel zip file in the jelly time rom thread
Ow, okay =)
so do you have this rom? http://forum.xda-developers.com/showthread.php?t=1778202
There is an update available. I saw another post of an user with wifi-problems. He flashed the update and the problems were solved.
I've also noticed, that the wifi might have some problems with some channels as you can see here:
Broken:
bluetooth - works in beta 7. Broken in beta 8 +
Working:
Wifi Tethering
camera - not perfect still buggy
Mic
accelerometer
audio
bluetooth
wifi - may not support some channels
hw acceleration
buttons
lights
gps
gsm
lots more
Click to expand...
Click to collapse
Hope it works :cyclops:
PS. this is the thread with the same problem i think:
http://forum.xda-developers.com/showthread.php?t=1818819
just did a full wipe, format, installed new update and still have the issue. some one has to have also experienced this before.
tjturko13 said:
just did a full wipe, format, installed new update and still have the issue. some one has to have also experienced this before.
Click to expand...
Click to collapse
I'm sorry for you.
- You could even try to change the wifi-channel to 1, 4 or 6 and disable wifi-security in the second attempt for test only.
- Try also to set a static ip in your phone (for your wlan).
- If you are bored you can reset the whole router to its factory defaults and leave all standard. Just enable wlan (and the isp connection) - but dont change the default ssid, wlan-security or channel etc.
Otherwise I have no more ideas.
With google you can find dozens of users crashing their routers with android or ios phones . Good luck dude!
wifi crashes router
\/\/iLLow said:
I'm sorry for you.
- You could even try to change the wifi-channel to 1, 4 or 6 and disable wifi-security in the second attempt for test only.
- Try also to set a static ip in your phone (for your wlan).
- If you are bored you can reset the whole router to its factory defaults and leave all standard. Just enable wlan (and the isp connection) - but dont change the default ssid, wlan-security or channel etc.
Otherwise I have no more ideas.
With google you can find dozens of users crashing their routers with android or ios phones . Good luck dude!
Click to expand...
Click to collapse
Ive had this problem to since switching to 'randomblame's kernel based ROMS (jellytime CM, jellytime aokp and jellytime by PACMAN - Paranoid, CM and AOKP).
Apparently it is a kernel issue and the only thing you can do is some of the things above or here
I was here hoping there might be a fix... I tried static IP, changing the router channel, WIFI never sleep etc etc etc.
The only workaround I found so far was to turn off wifi when Im done, it only seems to break when the phone is inactive for 5 minutes +.
brandub said:
Ive had this problem to since switching to 'randomblame's kernel based ROMS (jellytime CM, jellytime aokp and jellytime by PACMAN - Paranoid, CM and AOKP).
Apparently it is a kernel issue and the only thing you can do is some of the things above or here
I was here hoping there might be a fix... I tried static IP, changing the router channel, WIFI never sleep etc etc etc.
The only workaround I found so far was to turn off wifi when Im done, it only seems to break when the phone is inactive for 5 minutes +.
Click to expand...
Click to collapse
Exact same problem here. It took some time before I figured out that my phone was overwriting my gateway's MAC address, but I finally saw that message from another machine in my network:
Code:
arp info overwritten for 192.168.1.254 by 91:31:58:5d:e8:34
1.254 being my gateway's IP. I also tried giving my phone a static DHCP entry but it just didn't change anything. Any useful sysctl maybe ?
FWIW, it seems I "fixed" that issue by making my routers MAC address association permanent on my (manageable) switch. That obviously don't fix the real problem, but does not shut down the router's NIC. FYI, on a GNU/Linux machine, this is done with the arp command, i.e.:
Code:
# arp -s 192.168.1.254 00:ca:fe:ba:be:00
192.168.1.254 being your router's IP
HTH

[Q] CM11 WiFi doesn't connect

Hi there, my first post.
I've used arco68's guide to root my S4 mini LTE (serranoltexx) and flashed the CyanogenMod 11 M9 snapshot (cm-11-20140804-SNAPSHOT-M9-serranoltexx.zip), but the WiFi isn't working properly. Sometimes it connects (very rarely), but most of the time it just says "Connecting", "Authenticating..." and then goes back to say "Saved, secued with WPA" and the process repeats again.
I've tried flashing the following ROMs, but the WiFi isn't working properly on either of them:
cm-11-20140804-SNAPSHOT-M9-serranoltexx.zip (current)
cm-11-20140708-SNAPSHOT-M8-serranoltexx.zip
cm-11-20140813-NIGHTLY-serranoltexx.zip
Other things I've tried so far:
Using CM File Manager to delete contents of /data/misc/wifi and rebooting, as described here, but it didn't help.
Installed SQLite Debugger, went to Settings Storage > setttings.db > Global, where I wanted to change the value of wifi_display_on to 0 as described here, but it was already set to 0, so no luck here.
Changed the Region Code in WiFi settings (as described here) to United States, then to Europe, but this didn't help either.
Installed the latest nightly update, but still nothing.
Basically, I've tried everything I could find, but the WiFi still doesn't work, and I have no idea why. I don't want to downgrade to CM 10.2, since later when I decide to upgrade to CM 11, I'd need to wipe all the data and make a clean CM11 install. Also, I don't want to flash any other ROM except CM, so telling me to install Paranoid Android or anything else wouldn't help.
If you have any ideas how to solve this, that would be great! Also, feel free to ask for any additional details.
Update: I've just discovered that it connects to open WiFi networks without any problems (though I've only tried it on 2 so far), so probably WPA encryption or my old home router can be the cause of the problem. I can only change my home router to WPA (it doesn't work with WPA2), so I've yet to try it on another router supporting WPA2. If that works, it would solve the whole problem! I'm ashamed to say I haven't thought of this earlier...
Update 2: I just tested it on a WPA2-protected WiFi network and it connects without problems. The most likely conclusion seems that CM11 has some problem with WPA, so for the time being I'll switch to another router with WPA2. Hopefully gets fixed with the next snapshot!

Samsung Galaxy Ace 2x flashed with CM11, no mobile internet (Public Mobile)

Hello to everyone! I have Samsung Ace 2x (GT-S7560M) with Public Mobile, Canada. After the phone become incredibly lagging, I have decided to flash it with custom ROM, which I successfully did following instructions on this forum (http://forum.xda-developers.com/show...7#post50909757). I like my phone back again, the ROM is amazing.
BUT there are two huge issues - it is not connecting to Mobile Network and Bluetooth can not be enabled. (WiFi connects and working fine).
As I mentioned earlier I am with Public Mobile and able to make calls and recieve/send SMS messages with CM11. After every reboot there is message : "SIM card added. Restart your device to access the mobile network." , which can be easily bypassed by pressing right bottom button (not sure about the name, probably "Escape"). The phone indicates TELUS Network.
I read over the posts on this forum and tried to change settings in Prefered Network to GSM/CDMA auto(PRL). Also checked APN to Public Mobile (tried Telus as well) but no success in getting back 4g network.
Any suggestion? Really do not want to go back to official ROM
novice70 said:
Hello to everyone! I have Samsung Ace 2x (GT-S7560M) with Public Mobile, Canada. After the phone become incredibly lagging, I have decided to flash it with custom ROM, which I successfully did following instructions on this forum (http://forum.xda-developers.com/show...7#post50909757). I like my phone back again, the ROM is amazing.
BUT there are two huge issues - it is not connecting to Mobile Network and Bluetooth can not be enabled. (WiFi connects and working fine).
As I mentioned earlier I am with Public Mobile and able to make calls and recieve/send SMS messages with CM11. After every reboot there is message : "SIM card added. Restart your device to access the mobile network." , which can be easily bypassed by pressing right bottom button (not sure about the name, probably "Escape"). The phone indicates TELUS Network.
I read over the posts on this forum and tried to change settings in Prefered Network to GSM/CDMA auto(PRL). Also checked APN to Public Mobile (tried Telus as well) but no success in getting back 4g network.
Any suggestion? Really do not want to go back to official ROM
Click to expand...
Click to collapse
Unfortunately your issue with Bluetooth is super common with this phone and roms. In fact, as far as I'm aware there's not a single kitkat rom that doesn't disable Bluetooth. You might find a solution buried in one of the other threads pertaining to this phone, but I'm almost positive there's not a solution.
Just about every rom I've flashed for this phone gives me the sim card added message when I start it up, ignoring it is the best fix I've come across. Regarding your inability to connect to a network, it seems you've already tried everything I would have suggested. Which cm11 build did you flash, by the way?
If you can't get that sorted out you aren't stuck with going back to stock. There's also another cm11 build for the IIx/ Trend, as well as Omni 4.4.4, PAC 4.4.4, Beanatalk 4.4.3 and ALLEGEDLY SlimKat (I can't find the download link to save my life, but a few people have said someone ported slimrom to this phone).
Sorry I couldnt be of more help bru.
about my ROM
thank you for response, I am currently using CM11-20141114-UNOFFICIAL-kylessopen (240DPI) with gapps - kk -20140629-signed.
Hmm, the first time I flashed that same build I had quite a few issues and they rectified themselves when I flashed a different gapps. I think it was the January 2014 4.4.4 full package (when I've got some free time in an hour or so I'll let you know the exact one), which I found odd considering it was super out of date and yet cured what ailed me. Next time I flashed it the 20140629 package worked fine though, so who knows. You've tried redownloading that gapps package right? Sometimes an ever so slightly corrupted gapps zip can do this kind of stuff. Unfortunately I'm not super familiar with the ins and outs of this phone since its just to tide me over until I can afford to replace my Note 4 in earnest, so my ability to help here is mostly guesswork and drawing parallells. I hope you get this on the ropes dude. If you can't get it sussed out in the end I'd recommend going with Beanstalk. It doesn't have a working theme engine unfortunately and is ever so slightly more buggy (well, less buggy I. Your case I guess), but it's waaaaaaay more feature rich than either of the cm11 builds. If you value stability more than customization than Omnirom is your best bet. ALL of the roms for this phone are kinda glitchy, but I found Omnirom to be the least so.

elephone p8000 can't access network or google play neither via wi-fi nor cellular dat

Hi there,
Excuse the novice. Just got this 2 days ago and I am still trying to figure it out why I can't access the net at all.
I have not got Android experience much and I am digging now how to come out of this situation.
So no option to access Net at all. The Error in response is " Couldn't sign in. There was communicating problem with Google servers . Try again later." So this is like a loop there.
Android Version -5.1
Baseband Varsion - MOLY.LR9.W1444.MD.LWTG.MP.V16.P10
Kernel Version - 3.10.65
Build Number -ALPS.L1.MP3.V2_NB6753.65U.L1_P22
Custom Build Version - Elephone_P8000_20151014
I must admit the Phone came preset and once I have switch it on it picked up GMT time without I have set anything.
I will appreciate any help or pointing to a resources to try to solve as now it is unusable as I can't download anything.
Thanks in advance.
Check:
Settings --> Data Usage --> (cellular provider tab) --> toggle 'enable mobile data'
See if that's the issue. Good luck.
Now Stacked to The Elephone Logo on and unresponsive.
kevvyboy said:
Check:
Settings --> Data Usage --> (cellular provider tab) --> toggle 'enable mobile data'
See if that's the issue. Good luck.
Click to expand...
Click to collapse
Thanks kevvyboy,
I can't do anything right now. The phone by itself (really) got in a mode I can't read even with letters so small, went to the Android Man with red Mark and now is in front of me unresponsive with the logo of Elephone totaly unresponsive.
Just to underline - I have not touch anything- I have left it on stand by last time I have played with it.
Any clues and help please will be much appreciated.
PS. NOW I have managed to (I guess Switched it off) and again on and there was window with APP UPDATE - came to 116 out of 116 updated and now again can't access the net neither Google Play.
Could this be a OTA Update completed somehow?
Thanks everyone in advance!
saxon_fan_since_1980 said:
Thanks kevvyboy,
I can't do anything right now. The phone by itself (really) got in a mode I can't read even with letters so small, went to the Android Man with red Mark and now is in front of me unresponsive with the logo of Elephone totaly unresponsive.
Just to underline - I have not touch anything- I have left it on stand by last time I have played with it.
Any clues and help please will be much appreciated.
PS. NOW I have managed to (I guess Switched it off) and again on and there was window with APP UPDATE - came to 116 out of 116 updated and now again can't access the net neither Google Play.
Could this be a OTA Update completed somehow?
Thanks everyone in advance!
Click to expand...
Click to collapse
Hi again,
I have enabled the cellular data - no luck again.
When I am trying google play again message Google servers can't be reached and the more interesting - using the - preload browser it try to search trough yahoo search. This phone was sold to me as new, but I am starting to wonder what it has been through before it reached me?
Will a flash using PhilZ Recovery will help?
Could someone point me the way out of this please?
Thanks!
New bizarre Message.
Hi again,
Just to make it more interesting out of the blue it Popped up a Message box with following wording.
"In a Previous Android Version You have disabled all Google App services. Do you want to enable them. Yes/NO,
Of course I have chosen Yes and Again Can't reach net neither via Cellular data nor Wi-Fi.
Any useful contribution will be much appreciated.
Thanks!
Stuck on Airplane Mode? Try toggling it on and off. I remember my HTC OneX having an Airplane Mode issue - had to toggle on / off several times and reboot.
ETA - faulty APN settings for your provider? May explain a mobile data issue, but doesn't address the wifi issue.
Dammit.
Got It Work on Cellular
kevvyboy said:
Stuck on Airplane Mode? Try toggling it on and off. I remember my HTC OneX having an Airplane Mode issue - had to toggle on / off several times and reboot.
ETA - faulty APN settings for your provider? May explain a mobile data issue, but doesn't address the wifi issue.
Dammit.
Click to expand...
Click to collapse
Thanks Kevvyboy for your contribution.
Somehow I have managed to get the Cellular data connected and now have updated the Google Service.
WI-FI still an issue. Is there any sense - updating a driver (if I am not asking stupid question here)?
Thanks!
Glad to hear at least cellular working! The wifi issue is a bit of a mystery to me though - I'm all out of smart ideas, sorry
Hopefully some other bright soul can chip in.
saxon_fan_since_1980 said:
Hi again,
Just to make it more interesting out of the blue it Popped up a Message box with following wording.
"In a Previous Android Version You have disabled all Google App services. Do you want to enable them. Yes/NO,
Of course I have chosen Yes and Again Can't reach net neither via Cellular data nor Wi-Fi.
Any useful contribution will be much appreciated.
Thanks!
Click to expand...
Click to collapse
download drivers for SP flash tools and SP flash tools program.
go and download mediatek drivers and sp flash tool.
you can get these from elephones website, google or where ever. i got mind from needarom. i used the latest versions for both.
i downloaded the 5th November 2015 firmware from elephones rom. it came pre 7-zipped. i unzipped it and left it's structure.
installing the drivers part:
you need to disable signature enforcement in your OS to install the drivers.
open SP flash tools.
load the scatter file in the official rom folder you unzipped with 7 zip.
at this point press the download button in SP tools.
switch off your phone. connect the usb cable to the phone and the computer.
you should now have the latest firmware on you phone when complete.
please note it wipes everything, so back up anything important to you.
once done, set up your apn in settings, mobile networks, access points.
wifi should work after a clean factory reset if you don't have a dodgy device.
elephone only supports 2.4ghz for wifi as far as a i know.
also make sure your network bands and are supported by the p8000.
El_Nino9 said:
download drivers for SP flash tools and SP flash tools program.
go and download mediatek drivers and sp flash tool.
you can get these from elephones website, google or where ever. i got mind from needarom. i used the latest versions for both.
i downloaded the 5th November 2015 firmware from elephones rom. it came pre 7-zipped. i unzipped it and left it's structure.
installing the drivers part:
you need to disable signature enforcement in your OS to install the drivers.
open SP flash tools.
load the scatter file in the official rom folder you unzipped with 7 zip.
at this point press the download button in SP tools.
switch off your phone. connect the usb cable to the phone and the computer.
you should now have the latest firmware on you phone when complete.
please note it wipes everything, so back up anything important to you.
once done, set up your apn in settings, mobile networks, access points.
wifi should work after a clean factory reset if you don't have a dodgy device.
elephone only supports 2.4ghz for wifi as far as a i know.
also make sure your network bands and are supported by the p8000.
Click to expand...
Click to collapse
Hi El_Nino9,
Thank you for the reply and sorry I am delaying my response. I have actually done some of the suggested previously once I read more on the site - thanks for the contributors here. I had Eragon 9.5.0 Custom ROM set with Philiz recovery tool after Mediatek driver download but the wi-fi is still an issue.
I will try to perform the the one suggested from you, I just have located the latest Elephone p8000 ROM on the Elephone site and will perform this on a first chance I have. - most probably on Friday.
Thanks once again and I will post an update from the outcome.
OK!
I have done the upgrade to the 05.11.15 Stock ROM.
Have made a Factory Reset and the Wi-Fi is working as before but I can't reach internet basically.
Again after attempts to get to Play Store or to or to perform a simple Google Search it comes again after message "Just a second" and after 20- 30 seconds it end up with the message.
"Google Server can't be reached at the moment please try again later."
Any help on this will be much appreciated!
Thanks a lot in advance!
P.S>
I have just discovered that the icon of the WI - FI showing a processes going on but I can't reach My Router URL for example through the Local network.
Does it mean this is really dodgy unit or I am missing any settings or there is any cure for this?
Thanks again!
saxon_fan_since_1980 said:
OK!
I have done the upgrade to the 05.11.15 Stock ROM.
Have made a Factory Reset and the Wi-Fi is working as before but I can't reach internet basically.
Click to expand...
Click to collapse
so your mobile data still works on the latest firmware? specially after typing the correct apn settings?
regarding your wifi, where is the router in relation to your position? far away? standing right next to it with the phone? whats your encryption for your wifi? tried changing that to a different type and seeing if it connects?
if you have big concrete walls and live in a nice solid building that may too cause signal not to reach. the wifi isn't that great on the device speaking from experiance in comparison to other devices.
if all fails... possibly dodgy device
El_Nino9 said:
so your mobile data still works on the latest firmware? specially after typing the correct apn settings?
regarding your wifi, where is the router in relation to your position? far away? standing right next to it with the phone? whats your encryption for your wifi? tried changing that to a different type and seeing if it connects?
if you have big concrete walls and live in a nice solid building that may too cause signal not to reach. the wifi isn't that great on the device speaking from experiance in comparison to other devices.
if all fails... possibly dodgy device
Click to expand...
Click to collapse
Hi EL_Nino9,
I guess either the p8000 not like my D-LinkDIR-655 router or I am missing something in general.
I have an extension for the other rooms and the phone connecting to a simple TP-Link with no hassle at all, but D-Link is like a brick wall - you see the wi-fy working but no internet access.
It is still a mystery.
At least is proven the wi-fi module is working.
Believe me - I have tried to alter the setting on the route and still can't get to the net content.
Will keep exploring this and will report if any luck.
Thnaks!
I´m facing the same issue here. Google-Services like Google-Photo, Gdrive, Inbox are not working. Any solutions so far?
Looks Like I have rooter WI-FI issues
kraftmaschine said:
I´m facing the same issue here. Google-Services like Google-Photo, Gdrive, Inbox are not working. Any solutions so far?
Click to expand...
Click to collapse
Hi kraftmaschine - I have discovered that my aged D-LInk DIR-655 was giving me problems dropping out the signal. I had an access through mobile network and through my other room extension rooter, so I got on mind either compatibility issue or router problem. So I have upgraded the router and voila. Everything got sorted.
Also upgrade to the latest mod - not OWA but using the standard methods described here.
Hope that helps.

Categories

Resources