Anybody come across a USB travel charger for the XDA II? I have the USB cable just need a charger that outputs 5v and between 1 and 2amps and has the usual US, UK, EU, Aus and NZ attachements. Expansys.com have one but outputs 5.5v - not sure if that will damage the battery, proporta.com have one also but outputs 9v! Why these chargers don't stick to the standard 5v is beyond me.
not sure what you mean but usb in this context
the connector in the buttom of the xda2 is not a usb connector
and usb cant provide more then 500mA
If you have a usb cable for xda 2 you can acquire a lighter adaptor into which you plug the cable, this will give the correct voltage.
Link to ebay item:
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=4668&item=5735965938&rd=1&ssPageName=WDVW
not sure what you mean but usb in this context
the connector in the buttom of the xda2 is not a usb connector
and usb cant provide more then 500mA
Click to expand...
Click to collapse
Some power adapters come with USB sockets - I think it should become a standard so with the same cable you can get power from laptop/cigarette lighter/mains. Ericsson used RJ11 cables (modem cable) for it's mobile phone chargers but it never caught on.
If you have a usb cable for xda 2 you can acquire a lighter adaptor into which you plug the cable, this will give the correct voltage.
Click to expand...
Click to collapse
Thanks for the link, I have two of them already, looking for something to plug into mains.
Mark,
I think I know what you mean: A plug (either 12v in-car or 110V/230V mains) that supplies just +5V DC on a USB socket.
Received one with my retractable sync'n'charge cable from time168.com (but those guys dont exist anymore).
Also received two with my BT GPS from DConnex.
I would say they are for sale on eBay, at least with the sellers that supply these sync'n'charge cables.
I made an emergency charger myself based on USB: 4 NiMH AA cells (1.2V each) in a battery-holder & wired to a USB socket. Not pretty, but good enough for emergency.
You might want to look at www.javoedge.com. They have a USB retractable sync/charge cable and you can also get adapters that allow you to plug the usb cable into a US/European/wherever plug socket adapter.
You might want to look at www.javoedge.com. They have a USB retractable sync/charge cable and you can also get adapters that allow you to plug the usb cable into a US/European/wherever plug socket adapter.
Click to expand...
Click to collapse
I had a look at those - they're not really travel chargers just US and EU chargers and a bulky adapter for the UK.
I made an emergency charger myself based on USB: 4 NiMH AA cells (1.2V each) in a battery-holder & wired to a USB socket. Not pretty, but good enough for emergency.
Click to expand...
Click to collapse
That sounds like a good idea. Proporta.com have a 9v charger
http://www.proporta.com/F02/PPF02P05.php?t_id=940&t_mode=des but I was thinking AA batteries would be easier to get in an emergency.
Since I only know basic electronics I used 4 rechargeable NiMH cells that gice approx 4.8v alltogether. With normal (alkaline) AA cells you probably end up above 6V. I would not try that . . .
Setback of my solution is to have an AAcharger with me for longer trips.
About the travel adapter: The usb travel adapters I have came in two flavours:
1. Car cigarette lighter use
2. Mains use. I also got a number of 'plugs' with it to make the adaptor fit a variety of mains wall outlets.
I bought these on ebay. The HDMI is short but worked but when I connect both cables to lapdock, the USB is not being recognized so the keyboard/mouse is not working. I want this just to act as an extension so I can use full lapdock abilities with cables. Any idea what's going on (cable charges on plug but does not charge on lapdock)? Maybe someone has better usb cables.
fixed the link:
http://www.ebay.com/itm/29059482363...X:IT&_trksid=p3984.m1497.l2649#ht_3046wt_1508
http://www.ebay.com/itm/36042990934...X:IT&_trksid=p3984.m1497.l2649#ht_2333wt_1010
links appear to be broken...
From your title I've been looking for these (or similar) cables for a long time and have been unsuccessful. However I have yet to try them.
Fixed the link
http://www.ebay.com/itm/29059482363...X:IT&_trksid=p3984.m1497.l2649#ht_3046wt_1508
http://www.ebay.com/itm/36042990934...X:IT&_trksid=p3984.m1497.l2649#ht_2333wt_1010
i don't think it will work either way, tried a few things like this with no avail.
why wouldn't they? Cheap build quality that doesn't include the data wires? Hell I'll be willing to splice two cables together to get our desired effect, the only problem is that cords with a female micro usb are incredibly hard to come by
So that is what you think it is? No data on the usb cables.
Sent from my MB860 using XDA App
mamoranto said:
So that is what you think it is? No data on the usb cables.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
the only reason that is my suspicion is because there are many "charging" products out there that don't really need data. Why there would be a need for such a small charging extension cable is beyond me, but it's the only solution I can think of, but I have no way of confirming or denying it either. The ebay descriptions seem to imply that the data wires are there, but we all know how reliable ebay can be...
Another idea I had was that it might be sensing the resistance in the cable, since, if I remember correctly, that was how some think/though the car dock puts the atrix into car mode without a magnet as is/was commonly used. Again these are just ideas.
Or the cable is just so poorly made that it's defective...I honestly have no clue
Has anyone got full lapdock capabilities using extension cables? I can only get the screen working and not the mouse and keyboard.
The HDMI extender was the hard one to find. There are other micro USB extenders out there, theoretically with all wires connected....
http://www.usbfirewire.com/uextendmicrob.html
Kind of makes me wish i hadn't hacked up my lapdock to work with the Otterbox
Where did you get your HDMI extender? I got mine from All4Cellular but it's quite short. Will have to get another HDMI one if the usb cable you recommended works.
mamoranto said:
Where did you get your HDMI extender? I got mine from All4Cellular but it's quite short. Will have to get another HDMI one if the usb cable you recommended works.
Click to expand...
Click to collapse
If you're asking me, i didn't. I was referring to the ebay link in the third post.
grevedan said:
The HDMI extender was the hard one to find. There are other micro USB extenders out there, theoretically with all wires connected....
http://www.usbfirewire.com/uextendmicrob.html
Kind of makes me wish i hadn't hacked up my webtop to work with the Otterbox
Click to expand...
Click to collapse
before I read that post, I was looking around the forums and the web yesterday well into the night. here are some of the things I've found that might be relevant to everyone (and it might possibly be cheaper, though more diy).
Micro USB stuff:
I have no idea why this exists http://www.dealextreme.com/p/micro-...r-cable-for-blackberry-9900-black-30cm-107901
I have no idea why this only has 4 pins http://www.sparkfun.com/products/9614
http://www.sparkfun.com/products/10031
mamoranto said:
Where did you get your HDMI extender? I got mine from All4Cellular but it's quite short. Will have to get another HDMI one if the usb cable you recommended works.
Click to expand...
Click to collapse
Here's what I am thinking about doing:
http://www.ebay.com/itm/140626354628#ht_2821wt_1177 or http://www.ebay.com/itm/Micro-HDMI-...ultDomain_0&hash=item415eac6dc0#ht_2821wt_980
http://www.amazon.com/HDMI-Female-M...YPB4/ref=sr_1_2?ie=UTF8&qid=1329854686&sr=8-2
then the hdmi cable that came with our phone:
http://www.amazon.com/Motorola-Stan...QTA8/ref=sr_1_8?ie=UTF8&qid=1329854856&sr=8-8
The HDMI certainly looks like it may work but the reason I didn't buy that product from ebay a few weeks ago was because it was $50. Now miraculously, it's only $6. Maybe I'll get that if the USB cable I just bought that was suggested works a few posts back.
misiek93 said:
why wouldn't they? Cheap build quality that doesn't include the data wires? Hell I'll be willing to splice two cables together to get our desired effect, the only problem is that cords with a female micro usb are incredibly hard to come by
Click to expand...
Click to collapse
This micro usb extension cord explicitly states that all 5 wires are connected (compatible with droid bionic for the purpose of docking with a case on the phone):
http://www.ebay.com/itm/Micro-USB-E...395?pt=LH_DefaultDomain_0&hash=item335d13272b
I bought the HDMI extension cable and the USB cable above. I have a lapdock so I'll post if it works.
everything asked/answered in here is already covered in the original thread:
http://forum.xda-developers.com/showthread.php?t=1376679
robrj said:
This micro usb extension cord explicitly states that all 5 wires are connected (compatible with droid bionic for the purpose of docking with a case on the phone):
http://www.ebay.com/itm/Micro-USB-E...395?pt=LH_DefaultDomain_0&hash=item335d13272b
I bought the HDMI extension cable and the USB cable above. I have a lapdock so I'll post if it works.
Click to expand...
Click to collapse
The HDMI cable seems to work. On the lapdock, with just the HDMI cable hooked up, it functions like it was it's an entertainment center.
The USB cord will need to be modified a little bit. I can't get it to seat right on the USB jack of the dock. I'll need to shave it down a bit as it doesn't sit down snugly.
robrj said:
The HDMI cable seems to work. On the lapdock, with just the HDMI cable hooked up, it functions like it was it's an entertainment center.
The USB cord will need to be modified a little bit. I can't get it to seat right on the USB jack of the dock. I'll need to shave it down a bit as it doesn't sit down snugly.
Click to expand...
Click to collapse
I ordered the USB cable and experience this same problem, though I am waiting for my hdmi parts to come in (by April 6th I should have all my parts...). The cable itself works flawlessly as a micro usb extension cable when connecting it to the computer.
again as mentioned in the other thread, you want to be careful with the 5v coming out that micro hdmi port. for connecting back to your phone would be no issue, as the phone charges using this voltage, but hooking the lapdocks micro usb up to a host device probably wont appreciate the 5v coming back up the cable, where normally the usb device would be pulling power from said host, not providing it.
one suggestion is to just clip the red wire inside your micro usb cable/adapter.
btw the adapters i use do fit snugly side by side, without modification.
I've been following this thread for a little while now, and I wanted to share something I found.
I was looking at the Motorola Travel Webtop adapter. And I was curious to see whether it could be tweaked to suite our needs. I naively thought/hoped that I could flip the connectors in the device to make a small adapter to connect the Atrix to newer Lapdocks. Unfortunately as you can see in the pictures below (sorry not enough posts to link to the pictures) the two connectors are connected via a PCB not wires or a ribbon cable. Although I still have high hopes that I can de-solder the HDMI and USB connectors, and use a small length of flat ribbon cable to connect them and then re-positions the connectors in the case, to build a micro adapter to use the Atrix on the newer Lapdocks. Should this fail this will at least prevent others from making the same mistake, and solve the mystery of what's really inside the Webtop Travel adapter.
Do any one know if this Micro HDMI Cable would work for Lapdock.
http://www.ebay.com/itm/1-Feet-HDMI...s_Adapters&hash=item416612cecb#ht_1149wt_1187
Description says for Asus tf201 MEMO ME171.
I believe all Cables are standard. Can this used to Atrix 4g with Lapdock?
I have otterbox case for Atrix and don't want to Remove cover everytime to plug in Lapdock.
I have a cable which plugs into my charging port which then has a usb slot on the end. I want to watch films on my tablet which I can now do but I also need to be able to charge the tablet at the same time. Is there some kind of double socket I can plug into the charger point that I can then use to plug the charger and my existing usb cable into use both at the same time? What would this be called, I've tried searching splitters and adapters but this only seems to come up with car chargers which is not what I need.
Thanks!
I had some initial difficulty getting a micro usb OTG cable working, I ended up testing a few and thought I would share in case it saves anyone else some time or money.
if anyone else has adapters they've tried feel free to list them
I actually haven't tried a straight USB type C OTG cable yet, all have been micro USB OTG units with a micro USB to type C converter since I already had so many lying around.
First off I should mention not all micro usb to USB type C converters support OTG.
this Meenova one does and works with the oneplus 3t: https://www.amazon.com/gp/product/B018G6IK7E/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
with that converter pretty much any OTG adapter will work.
Charging also works.
This micro USB OTG adaptor is nice because its so low profile.
I tested it with a flash drive and it works fine with the Meenova adapter listed above.
https://www.amazon.com/gp/product/B0196FG4DG/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
This Samsung adapter also works well with the Meenova adapter, it has quite a few features which I tested on the Oneplus 3t, its expensive though so unless you have a Samsung tablet as well its not likely to be worth it for most people:
built in features:
two USB ports
Ethernet port
Charging port for simultaneous charging and OTG
On the Oneplus 3t both charging and OTG work fine but not at the same time.
whichever you plug in first is what it will use until you unplug and re-plug in the adapter.
That being said my understanding is that this is likely just a kernel limitation, it was the same way on the nexus 7 and a custom kernel enabled the simultaneous charging.
I'm not sure how useful that would be on a phone but I thought I would mention it.
Both USB ports work simultaneously, I connected two flash drives and both were picked up by the phone right away.
I wasn't able to get the Ethernet port working, or at least there was no indicator that it was working (My samsung tablet gives a notification that the Ethernet is plugged in but Samsung may have added that, I'm not sure) I'll play with it some more later.
Adaptor link: https://www.amazon.com/gp/product/B00J2N0GB4/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1
and lastly I tried this micro USB to type c adapter and charging works but OTG does not:
https://www.amazon.com/gp/product/B0191FRCAA/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Thanks for your post about OTG adapters. Do you have any updates on this issue? I'm looking for possible adapters but cannot find any.
The Meenova adapter is not available in Europe and also seems not to be available from Amazon.com anymore. I can also disadvise from Anker USB adapter because it doesn't work.
What I'm looking for is an USB typ-C to microUSB adapter for audio output via USB.
Anker adapter supports dash charge (works with oppo vooc power bank). I am trying OTG now, but I have some cheap OTG dongle (https://www.aliexpress.com/item/5pc...G-adapter-for-HTC-for-Samsung/1734417126.html) and I am not sure if it works at all Anyway OTG via Anker is not working for me at this moment.
mmmm1234 said:
Thanks for your post about OTG adapters. Do you have any updates on this issue? I'm looking for possible adapters but cannot find any.
The Meenova adapter is not available in Europe and also seems not to be available from Amazon.com anymore. I can also disadvise from Anker USB adapter because it doesn't work.
What I'm looking for is an USB typ-C to microUSB adapter for audio output via USB.
Click to expand...
Click to collapse
i have this one
http://www.ebay.co.uk/itm/381793306261
Black / For One Plus Two 2 3 (that's what it says in the drop down)
my Fiio E10k headphone amplifier works with it if that's what you're looking for
reubenbubu said:
i have this one
Black / For One Plus Two 2 3 (that's what it says in the drop down)
my Fiio E10k headphone amplifier works with it if that's what you're looking for
Click to expand...
Click to collapse
Thanks! Though it's USB type B. I need micro USB.
Hi all,
I need a new USB cable for Android Auto in my car. Having some problems and want to start by ruling out the cables as a problem. (Pioneer have told me the cable included is not usb-C certified). It needs to be plugged into the back of the Pioneer unit which involes removing half of my car interior, so I want to buy a good cable and not have to do this again any time soon!
So it needs a 'male' end to go into the back of the unit, and a 'female' end which sticks out of my glovebox permanently. Then I'll need a second cable (a usb-a to usb-c to attach the pixel.)
Having seen all the news about dodgy cables and Benson Leung (Spelling?) approved cables I confess I'm more confused than I've ever been. Plus the options seems less with the male to female cable and I can't find any recent online reccomendations.
Can someone either tell me what I need to look for, or preferably, link me to a high quality male to female cable on Amazon UK? and of course one that's certified and will play nice with the USB-C device (my first gen pixel) that's gonna be plugged into the other end.
Getting the other cable is less of a problem, there seem to be plenty of lists online for recommended high quality usb-a to usb-c cables.
Thanks in advance for any help.