I was trying to instal a custom rom from clockwork mod and while it was instaling the instalation was aborted because of status 7 problem and its stuck in the recovery mode and i cant do anything and my pc cant see it.
Any help appricated
karafliaris said:
I was trying to instal a custom rom from clockwork mod and while it was instaling the instalation was aborted because of status 7 problem and its stuck in the recovery mode and i cant do anything and my pc cant see it.
Any help appricated
Click to expand...
Click to collapse
Be specific.
What rom you want to install
What recovery you use (means version).
khairulez said:
Be specific.
What rom you want to install
What recovery you use (means version).
Click to expand...
Click to collapse
i was trying to install cm 11 http://download.cyanogenmod.org/?device=endeavoru
and the recovery was clockwork mod
but today it doesnt even start
karafliaris said:
i was trying to install cm 11 http://download.cyanogenmod.org/?device=endeavoru
and the recovery was clockwork mod
but today it doesnt even start
Click to expand...
Click to collapse
If you want install cm11 rom you musst use cwm v6.xx.
thank you for your replies but now the priority is to get it to start running again , cause its completely dead
Related
I am sorry about the noobness but i cant seem to find a proper thread for recovery setup.
I installed ROM Manager and then the CWM recovery from there.
But if i try to root into recovery I get a " android with a exclamation mark" - so assumes i messed something up ?
only way is to power cycle the device .
Can anyone here please help how i install CWM as i want to flas CM 11
mshenoy4573 said:
I am sorry about the noobness but i cant seem to find a proper thread for recovery setup.
I installed ROM Manager and then the CWM recovery from there.
But if i try to root into recovery I get a " android with a exclamation mark" - so assumes i messed something up ?
only way is to power cycle the device .
Can anyone here please help how i install CWM as i want to flas CM 11
Click to expand...
Click to collapse
Have you tried going back to freegee and installing cmw there?
I used freegee.......it works...but couldn't get philz to work.. Its all good though 6.0.4.7 I think it is works fine for me so far
*2SHAYNEZ*KCCO*E980*
Yes guys. Thank you for the help.
Tried freegee and I got CWM to work finally pheww.
Now I have backup and just installed CM11 nightly
Thank you so much
Sent from my LG-E980 using xda app-developers app
shayneflashindaily said:
I used freegee.......it works...but couldn't get philz to work.. Its all good though 6.0.4.7 I think it is works fine for me so far
*2SHAYNEZ*KCCO*E980*
Click to expand...
Click to collapse
How were you able to make flashing custom roms work using freegee? I successfully rooted my Optimus G Pro and used freegee to install CWM recovery 6.0.4.7, but everytime I try to flash a custom rom - the phone would reboot after 10 -15 seconds. I followed and installed the custom roms accordingly to the instructions. Can you help me?
DraghanC said:
How were you able to make flashing custom roms work using freegee? I successfully rooted my Optimus G Pro and used freegee to install CWM recovery 6.0.4.7, but everytime I try to flash a custom rom - the phone would reboot after 10 -15 seconds. I followed and installed the custom roms accordingly to the instructions. Can you help me?
Click to expand...
Click to collapse
When you start the freegee app is there an option to "unlock" ?
also, are you able to use CWM otherwise? liks to make a nandroid backup and such ?
mshenoy4573 said:
When you start the freegee app is there an option to "unlock" ?
also, are you able to use CWM otherwise? liks to make a nandroid backup and such ?
Click to expand...
Click to collapse
There are two different versions of Freegee on the Playstore. One is the free version and One is the paid version. I used the free version and when I open the app to install CWM recovery I don't see the "unlock" option, so I think the "unlock" option is only available in the paid version. Also, when I used the free version of Freegee to install CWM recovery, I can make and restore my nandroid backup. Maybe I need to buy the paid version of Freegee??
no u don't need paid.
also I didn't have the unlock option and I was able to flash.
I would say try twrp.
also are u trying just 1 ROM or have to tried a couple. maybe do that
mshenoy4573 said:
no u don't need paid.
also I didn't have the unlock option and I was able to flash.
I would say try twrp.
also are u trying just 1 ROM or have to tried a couple. maybe do that
Click to expand...
Click to collapse
I already tried 3 different roms and they all turned out the same. Keep rebooting after 10 - 15 seconds. I might have to give twarp a try. thanks
Just wondering, what software version is your phone?
Sent from my LG-E980 using XDA Premium 4 mobile app
Check in CWM recovery, before you flash any of the ROM's that LOKI support is enabled, I think you can find it under Advanced and it says something like "Toggle LOKI support"
Erik
ricco333 said:
Check in CWM recovery, before you flash any of the ROM's that LOKI support is enabled, I think you can find it under Advanced and it says something like "Toggle LOKI support"
Erik
Click to expand...
Click to collapse
okay I will try that and see if it works.
ricco333 said:
Check in CWM recovery, before you flash any of the ROM's that LOKI support is enabled, I think you can find it under Advanced and it says something like "Toggle LOKI support"
Erik
Click to expand...
Click to collapse
do I enable Loki after the flash or before the flash? Because I enable loki in the advance option of CWM recovery after I flash a custom rom and the phone still reboots 10-15 seconds. I did all the normal wipes and stuff too. I'm thinking maybe its because of I'm the software version that I'm on which is E98010g.
He said "check before you flash any rom,that LOKI support is enabled"... You should carefully read instructions before you do anything or you will end with bricked device...
Sent from Tapatalk
mshenoy4573 said:
I am sorry about the noobness but i cant seem to find a proper thread for recovery setup.
I installed ROM Manager and then the CWM recovery from there.
But if i try to root into recovery I get a " android with a exclamation mark" - so assumes i messed something up ?
only way is to power cycle the device .
Can anyone here please help how i install CWM as i want to flas CM 11
Click to expand...
Click to collapse
i did this as well and somehow now i can only get into twrp however i cant flash anything...any direction on this? i cant find the file i need to put on the sd card and flash thru twrp...any help?
For some reason Rom manager cwm didn't work for me so I tried installing freegee from the play store and installing cwm from there.
Since freegee my cwm works fine and I was able to flash.
Have you given freegee a try ?
Sent from my LG-E980 using xda app-developers app
I'm having the same trouble with recovery. I was on SlimBean for several months and decided to flash a ROM from RadeonMaya, but it wouldn't boot, so I tried to restore my backup of Slim from CWM. It looked like it restored properly, but it wouldn't boot either. I finally reverted back to stock and rooted again, downloaded Freegee and tried to flash CWM. I booted into recovery to flash my Slim backup, but I got an "error loki-ifying the boot image". I tried Phil's recovery, but couldn't boot back into recovery from CWM
Since then, I have not been able to flash anything, and have reverted back to stock probably a dozen times. I've tried TWRP, but can't flash a version that works on 4.1.2. I'm beyond frustrated at this point. I had fun flashing on this phone until these problems showed up, now I'm just going to try to like the stock ROM and hope we get an update to KitKat.
Just a quick question guys. What does freegee's "unlock" feature do? I ask because I don't get that option in Freegee either. Is it supposed to network unlock your phone or? Also, what is the need for the unlock?
I installed clockwork mod through odin, when I try turning the tablet on it goes streight into recovery, how do I fix this?
bitterdee said:
I installed clockwork mod through odin, when I try turning the tablet on it goes streight into recovery, how do I fix this?
Click to expand...
Click to collapse
Have installed the Quickboot.app to reboot into recovery?
The way to fix it, go back to stock with odin.
bierma32 said:
Have installed the Quickboot.app to reboot into recovery?
The way to fix it, go back to stock with odin.
Click to expand...
Click to collapse
I can't remember whether I istalled quickboot, I might have as at first after I installed CM it did go into android OS but I wanted to check whether CM stays if I boot into recovery and that's when it didn't let me get out of recovery no matter what I did.
I did fix it by installing the stock rom. Thanks for your help.
bitterdee said:
I can't remember whether I istalled quickboot, I might have as at first after I installed CM it did go into android OS but I wanted to check whether CM stays if I boot into recovery and that's when it didn't let me get out of recovery no matter what I did.
I did fix it by installing the stock rom. Thanks for your help.
Click to expand...
Click to collapse
You have install an CM = Cynagon Mod or CM mine Customrom
We are have no working CM for this tab !!!!!
bierma32 said:
You have install an CM = Cynagon Mod or CM mine Customrom
We are have no working CM for this tab !!!!!
Click to expand...
Click to collapse
The issue was with clockwork mod as my initial post states mate.
bitterdee said:
The issue was with clockwork mod as my initial post states mate.
Click to expand...
Click to collapse
clockworkmod recovery is CWM and not CM =CynagonMod
To your Prob. the only way is boot into download mode and flash Stock with Odin
Hello members,i have a problem . I bought a samsung galaxy tab 3 7.0 wifi (SM-T210) last week and i have rooted it + installed cwm and after i flash anything(custom lock screen or custom rom) the tablet gets soft bricked and the rom dont boot anymore,it enters automaticaly in cwm. So how can i fix it?
d0vada said:
Hello members,i have a problem . I bought a samsung galaxy tab 3 7.0 wifi (SM-T210) last week and i have rooted it + installed cwm and after i flash anything(custom lock screen or custom rom) the tablet gets soft bricked and the rom dont boot anymore,it enters automaticaly in cwm. So how can i fix it?
Click to expand...
Click to collapse
Which recovery Version you are flashed on your tab?
And which root.zip you are used?
Flash Stockrom and try it again.
bierma32 said:
Which recovery Version you are flashed on your tab?
And which root.zip you are used?
Flash Stockrom and try it again.
Click to expand...
Click to collapse
Im using the latest TWRP recovery 2.7.0.0 and for root i use a zip called universal root armeabi *smth like that*
I allready flashed the stockrom 3 times and i got the same result. also im using the T210XXANC2 firmware.
In CWM, wipe data and factory reset. Then go to Download mode, use Odin and flash your stock rom. That should do it.
paranoidmarvin42 said:
In CWM, wipe data and factory reset. Then go to Download mode, use Odin and flash your stock rom. That should do it.
Click to expand...
Click to collapse
i have rooted stock rom running with latest twrp but if i flash a custom rom it wont boot anymore, it gets softbricked but i dont know why.
d0vada said:
i have rooted stock rom running with latest twrp but if i flash a custom rom it wont boot anymore, it gets softbricked but i dont know why.
Click to expand...
Click to collapse
What ROM are you trying to flash? You must have missed a step. Make sure you read the instructions carefully before doing anything and use a custom rom for your device. Try again. I'm also new to Android and has softbricked my tab a couple of times now.
Go back to stock. Let your device boot completely. Install recovery again. Reboot again.
To make it easier, how about watching a video so you can see how it's done properly? It helped me a lot. http://forum.xda-developers.com/showthread.php?t=2459817
Good luck.
paranoidmarvin42 said:
What ROM are you trying to flash? You must have missed a step. Make sure you read the instructions carefully before doing anything and use a custom rom for your device. Try again. I'm also new to Android and has softbricked my tab a couple of times now.
Go back to stock. Let your device boot completely. Install recovery again. Reboot again.
To make it easier, how about watching a video so you can see how it's done properly? It helped me a lot. http://forum.xda-developers.com/showthread.php?t=2459817
Good luck.
Click to expand...
Click to collapse
I want to flash seal rom. also, thanks for the links, i will check them later.
d0vada said:
I want to flash seal rom. also, thanks for the links, i will check them later.
Click to expand...
Click to collapse
Plesse,dont use TWRP , i prefere CWM or PhilzTouch,why : alot of user are have postet probs when they used TWRP.
Also i prefere after rooting The Blackhawk Kernel.
bierma32 said:
Plesse,dont use TWRP , i prefere CWM or PhilzTouch,why : alot of user are have postet probs when they used TWRP.
Also i prefere after rooting The Blackhawk Kernel.
Click to expand...
Click to collapse
So i have flashed (again) the stock firmware from sammobile,i rooted it,installed cwm 6.0.4.7 and then i flashed SEAL rom v4 and its not working. Its like something that doesnt let custom rom boot on my tab. Sad part is that i cant provide a logcat because the android wont boot.
EDIT: Do i have to unlock the bootloader?
d0vada said:
So i have flashed (again) the stock firmware from sammobile,i rooted it,installed cwm 6.0.4.7 and then i flashed SEAL rom v4 and its not working. Its like something that doesnt let custom rom boot on my tab. Sad part is that i cant provide a logcat because the android wont boot.
EDIT: Do i have to unlock the bootloader?
Click to expand...
Click to collapse
Last Try,
Have you flashed The Blackhawk Kernel?
If not , Boot Into recovery, make a full wipe, flash seal ,Blackhawk Kernel ,full wipe again and reboot.
If this all not help ,post your prob at The Rom Thread.
bierma32 said:
Last Try,
Have you flashed The Blackhawk Kernel?
If not , Boot Into recovery, make a full wipe, flash seal ,Blackhawk Kernel ,full wipe again and reboot.
If this all not help ,post your prob at The Rom Thread.
Click to expand...
Click to collapse
I allready tried 3 roms(seal, 4.2.2 beta 2 and inspire) and all goes to the same result. Also, after installing the cwm i flash first the blackhawk kernel and android boots normally (stock rom with custom kernel) but custom rom with or without custom kernel wont boot.
I had similar problem try flashing seal v3.
Been trying to install a Rom for about a week still can't get passed the status 7 error and I changed the updater script still get the status 7 don't kno Wat to do
What ROM are you trying to flash and what recovery are you using?
http://forum.xda-developers.com/des...ent/rom-liquidsmooth-v3-2-desire-816-t2895310 this Rom and philz touch recovery
androidianT said:
http://forum.xda-developers.com/des...ent/rom-liquidsmooth-v3-2-desire-816-t2895310 this Rom and philz touch recovery
Click to expand...
Click to collapse
Um that ROM isn't working and was abandoned by the developer before he ever even got it to boot.
I also tried with the cm11 Rom to and get the same thing can u prefer a good stable Rom for my vm model please
androidianT said:
I also tried with the cm11 Rom to and get the same thing can u prefer a good stable Rom for my vm model please
Click to expand...
Click to collapse
I before tape-worm the same problem: Mistake in/storage/sdcard1/....... (estatus7) on having installed, change custom recovery
Thks for the help guys it was the Rom I tried out the cm12 Rom and installed without a problem
Hello to everyone ,
i installed miui v6 to my M8 and after that i cant flash any other rom.
I install a new rom from zip but after the reboot it stucks on the first screen of the new rom.
Waited for 3 hours but nothing.
What do you suggest ?
alexis333 said:
Hello to everyone ,
i installed miui v6 to my M8 and after that i cant flash any other rom.
I install a new rom from zip but after the reboot it stucks on the first screen of the new rom.
Waited for 3 hours but nothing.
What do you suggest ?
Click to expand...
Click to collapse
simple question, do you flashed the boot.img inside the rom using fastboot?(fastboot flash boot boot.img)
Simple answer.
No.
Now what ?
Husky34 said:
simple question, do you flashed the boot.img inside the rom using fastboot?(fastboot flash boot boot.img)
Click to expand...
Click to collapse
This isn't normally required on the M8, unless its some quirk specific to MIUI (which is a ROM I don't a have much knowledge of).
Make sure your TWRP version is up to date.
Make sure your hboot is up to date.
Wipe user data and cache (default wipe in TWRP) before flashing the ROM.
Those are the most common reasons for no boot after flashing multiple ROMs.
I dont use TWRP. I use Philz Touch recovery.
Where can i download latest TWRP ?
alexis333 said:
I dont use TWRP. I use Philz Touch recovery.
Where can i download latest TWRP ?
Click to expand...
Click to collapse
That may be the issue right there. I know some folks are still using it, but Philz hasn't been updated in a long time. And since some newer ROMs have issues with older TWRP builds, I would assume the same would be true with Philz.
You can get TWRP here: https://dl.twrp.me/m8/
alexis333 said:
I dont use TWRP. I use Philz Touch recovery.
Where can i download latest TWRP ?
Click to expand...
Click to collapse
https://twrp.me/devices/htconem8gsm.html
I flashed TPWR and then flashed the new ROM and everything ok.
Thanx for your help men ..
alexis333 said:
Thanx for your help men ..
Click to expand...
Click to collapse
There's a button for that.
Happy it worked for you.