I've got a little problem that is draining my battery.
When i press the power button, my screen turns off, but two second later it turns on into the lockscreen.
Already tried a full wipe to look if some app is causing the problem, but nop. it still had the problem.
However the weird thing is that when i use the phone it never turns the screen off. it does sometimes pop up the power menu, but that does not happen often.
I hope someone can help me, because it annoys the heck of off me that i can't even get 7 hours out of my phone w/ minimal use.
Everytime I boot my phone up, it works fine up until when the screen goes into sleep mode. Once it goes into sleep mode I cannot turn the screen back on, it stays black. The keyboard, end and answer key lights show up when I press the power button but the screen just stays black no matter what button I press.
I end up having to either take the battery out or using the stick to press the reset button on the side in order to get the phone to where I can see the screen again. I have adjusted the settings to where the screen doesnt go into sleep mode and the screen just stays on but that drains my battery. I want to be able to have my screen go off so I can save power but if it goes off it wont come on again until I reboot.
I have done a hard reset. This problem started happening to me when I started using the Energy Rom but I've even flashed different Roms and the problem still exist.
Somebody please tell me what's wrong! I need help! This is a big annoying problem to have. Thanks.
is this problem occurring when you slide the keyboard out?
i had the t-mobile touch pro2 with this problem.
the screen would die when the keyboard was out and not come back.
if this is the case, what i did was...
well. obviously not open the keyboard fully.
but if i accidentally had.
instead of pulling out the battery, i waited...
till the screen 'naturally' went to sleep.
than i would pull out the stylus or press power button
and the screen would come on.
sh4d0w86.
sh4d0w86 said:
is this problem occurring when you slide the keyboard out?
i had the t-mobile touch pro2 with this problem.
the screen would die when the keyboard was out and not come back.
if this is the case, what i did was...
well. obviously not open the keyboard fully.
but if i accidentally had.
instead of pulling out the battery, i waited...
till the screen 'naturally' went to sleep.
than i would pull out the stylus or press power button
and the screen would come on.
sh4d0w86.
Click to expand...
Click to collapse
Yes the problem still exist even when I slide the keyboard out. Once the screen goes off, that's it....pressing the power button to get it out of sleep mode, sliding the keyboard, I press all buttons and nothing works. The only thing that "works" to get the screen back on is removing the battery or using the stylus to press the reset button.
When sliding the keyboard out the keys light up but the screen doesn't come on, also pressing the power button lights up the end and answer keys without the screen coming on.
themasterhook2000 said:
Yes the problem still exist even when I slide the keyboard out. Once the screen goes off, that's it....pressing the power button to get it out of sleep mode, sliding the keyboard, I press all buttons and nothing works. The only thing that "works" to get the screen back on is removing the battery or using the stylus to press the reset button.
When sliding the keyboard out the keys light up but the screen doesn't come on, also pressing the power button lights up the end and answer keys without the screen coming on.
Click to expand...
Click to collapse
so. whenever the screen goes out, period, you cant get it back?
or the screen goes out and cant get it back once you slide the keyboard out?
if it is only when sliding out the keyboard...
try not opening the keyboard fully on the right side.
on my rhodium, after that point, the screen goes out.
sh4d0w86.
sh4d0w86 said:
so. whenever the screen goes out, period, you cant get it back?
or the screen goes out and cant get it back once you slide the keyboard out?
if it is only when sliding out the keyboard...
try not opening the keyboard fully on the right side.
on my rhodium, after that point, the screen goes out.
sh4d0w86.
Click to expand...
Click to collapse
Yes, period. Also, you know when you put your face to the phone during a call and the screen goes off so your face wont press anything on the screen? It doesn't come back on from that either once I end the phone call, it just stays black. I'm assuming you don't have any other suggestions. This Sucks
themasterhook2000 said:
Yes, period. Also, you know when you put your face to the phone during a call and the screen goes off so your face wont press anything on the screen? It doesn't come back on from that either once I end the phone call, it just stays black. I'm assuming you don't have any other suggestions. This Sucks
Click to expand...
Click to collapse
: / sorry. i am unsure.
maybe you have a lose connection?
sh4d0w86.
This has to be a software issue but I don't know where to start. I'm surprised nobody else has encountered this problem. I've grown frustrated of this issue because I don't understand why it's doing this. I have had the phone for almost 6 months only dropping it once 4 months ago and it wasn't a strong damaging drop that would affect anything inside. I guess I'll just have to go last resort and call warranty to swap the phone out. Thanks for the help.
Same problem
themasterhook2000 said:
This has to be a software issue but I don't know where to start. I'm surprised nobody else has encountered this problem. I've grown frustrated of this issue because I don't understand why it's doing this. I have had the phone for almost 6 months only dropping it once 4 months ago and it wasn't a strong damaging drop that would affect anything inside. I guess I'll just have to go last resort and call warranty to swap the phone out. Thanks for the help.
Click to expand...
Click to collapse
My phone also dos not come back on, when I put it in out the sreen with the power button on top, or when the phone goes to sleep. Nothing can put it back on(opening te keyboard, pulling out the stylis, presing the answer-, windows-, back- and end button). I and up using a music players too keep the phone busy what's makes it operational. Cant really remember when this started happening exactly. My phone is at the moment loaded with a standard ROM. I used too have a custom ROM.
My TP2 does this too, although I only encounter the problem sometimes when someone calls. I answer and put the phone next to my ear, the screen goes black as it should and the phone just dies. I can't hear what the other person is saying and the screen wont turn on anymore. I have to take out the battery to reboot.
set light sensor to manual in settings. You have some bad or fragmented code causing the problem. Pretty common actually, many different reasons, but usually either a bad light or proximity sensor or software issue. Setting the sensor to manual should do it, if not, hard reset and allow the phone to fully set up before touching it, to allow full customization process to complete. Search my posts on SOD (sleep of death) for more information.
Funny this was brought up. Now im worried I just dropped 250.00 and have a new one coming.
Mine started with the ear piece quit working. couldnt hear anything except on speaker.
Anyway I started having the screen issue over a month ago, only way to get it back was soft reset with the stylus. Also when the screen was lit, I couldn't hit the power button to turn the screen off. At times the screen would be on 24/7 and I just dealt with it. The times when it decieded to go to sleep was when I needed the soft reset. Well long story short I forgot my charger one day at work and the battery died. after pressing the power button for hours with no response, moving the screen in all diffrent directions as I pressed the button.It came on once after hrs of messing with it. Well today it died again and I am fed up with it so out came the tools. Once I opened it up I noticed the ribbon that feeds the screen from the mother board was worn and torn. the ribbon slides everytime the keyboard is slid out and it rubs on both sides of the phone. I thought maybe mine was just a fluke and was installed wrong considering the phone being 10 months old but now I read this and see maybe its a common problem. The cheapest I could find the Ribbon was 56.00 so I didnt want to chance it not being the issue.
Okay I will try to sum this up. My S3 was working fine and everything randomly I noticed issues with battery calibration It would be 100% then I would calibrate it and then unplug and then I'd instantly drop to 85%. Thought It was a battery issue and made a point to get a new one later. Then it kept working for another month or so then It started really screwing up the shutdown menu would randomly pop up and I'd back out of it.
Then randomly 3 seconds later the phone reboots. And it would keep doing that randomly I thought it might be a power button issue. Then as time goes on it got really bad to where it would simply reboot and not make it past the bootloader, It would not "reboot" more like a complete shutdown then I'd have to power it again and have it do the same thing. Seeing how I could not even make it past the bootloader I got a new battery, waited a week for it and then I put it in and the same issue happened. It would not get past the bootloader.
So I kept trying and trying and trying and it finally booted past that. And it stayed on for a whole night. I did everything on it I normally would and it was working great. Then the battery was getting low so I plug it in and was going to calibrate it after it was charged, I go back to it and it's dead again won't get past the bootloader once again. I'm completely out of ideas on how to fix this I pop'd off the button and blew in there and the button seems fine and everything still no change. I also can not get into recovery. It trys and loads but then shuts off. Anyway if anyone has any ideas on what this is or how to fix please help! I need my phone back! Thank you.
I'm running MOAR Lite version.
UPDATE: Took the phone apart and took a close look at the button it looks 100% fine...I saw a video on youtube that requires you to complete tear the button off and it works. But I don't know if the button is my main cause of this issue or if it will actually work. Some says it works, some says it does nothing...Please let me know thanks...
UPDATE 2: It will show that battery with spinning circle in it for like 1 second then turn off again. (When it is plugged in)
That's odd. But when it comes to the power button, dismantling and what not 90% of the time will show 0 issues. It will look perfectly fine when it's not. You playing with the power button I assume were pressing hard and normally to try testing it. It's a common issues on this version of the S3 to have faulty power button and you would need to get it repaired. Odly even slightly atmospheric changes can cause it to act different at different points. Some days it works fine, other days a very slight brushing over can cause it to screw up and trigger a manual shut down (holding for like 10 or 15 seconds).
Assuming that it is the power button, or to try, just do a variation of things to the power button itself. Use your finger nail to jiggle it around with different pressures. During boot if it shuts off, it could be the power button internally stuck, just jiggle it around.
This is all I can think of unless you bring it in to get repaired.
I was encountering the exact same problem. I would try to get into download mode and it would sit at the "Downloading" screen for about 5-7 seconds then the display would go blank. It won't make it into recovery either. Based on the above recommendation I took the whole phone apart and sprayed a lot of compressed air directly on the power button mechanism and the plastic case pressing the button in. I didn't see anything broken with the button when I did that.
It seems to be working now, I can boot into my Rom. Don't know how long this fix will last.
Put my watch on charge last night, as i do every night, and after a second or two the screen blinked and the "Dock Mode" clock/charge screen came on. except it was at 90°.
So I lifted if off, waited a few second and then placed it back on the charger.... same again! Okay, lets try a reboot, nope same. okay, it's been a while left factory reset.... whilst it was doing it setup and stuff I dropped it back on to the charger and the screen rotated. great!
I went of to do something, leaving the watch to finish its thing, when I came back to it 10 mins later or so, the Charge screen was back on, at 90°
Cant remember having any updates yesterday, don't know what could have changed... any suggestions welcome.
I had that same issue a while back and it turned out that the gyro inside the watch was stuck I was able to lightly tap the watch on my desk and it started working again for me. Hope that will help with your situation. (lightly tap don't want to do it hard so as not to break the screen)
Basically most of the post in the title.
I've been playing around, got it rooted with WETA, installed Kali, went back to Stock. In both Kali and now Stock, if the screen times out, or if I hit the power button to lock the screen, it will not come back up and only a hard reboot will get it back.
Same here. I’m rooted but stock rom. Been rooted for a while but this problem only started within last few days. Same exact issue. Booted into safe mode and problem still exists: if screen gets turned off or times out, can not get it to turn back on without hard reset.
I just factory reset mine. I use it for work so I wanted to see if I could reset and restore. During the setup process when it asked for the wifi password I went to the other office to get it and by the time I came back, the screen had timed out and would not come back on still. So, tells me it is not an app and is likely a hardware issue.
Edit: Well, now it seems to be working. I let it sit and restore for a while. Tried to turn the screen on and it took a bit longer than normal but it came on. So far it does not turn the screen on with a screen tap like it used to but it will turn on with a little delay after pressing the power button...
Update on my update: Tablet still has times where pushing the power button or tapping the screen does not turn it on. I basically have to make the motions as if I am opening the magnet case up and the screen will turn on. So, not all the way fixed...