Related
I'm trying to unlock my phone, I bought used on ebay, I found found a thread here that shows you how to unlock, but can't even do the first step. when I install a different sim card, I don't get the message Unlock, the phone reads the sim as a non support sim.
the sim I'm putting in the phone doesnt have service on it, Is this the reason the unlock message doesn't come up?
Please Help
Maybe your phone is already unlocked
Sent from my SAMSUNG-SGH-T989
Not sure
cricketAC said:
Maybe your phone is already unlocked
Sent from my SAMSUNG-SGH-T989
Click to expand...
Click to collapse
I put a metro pcs sim that has service on it, but when I try to make a call, it say, not register to network, and or mobile network disconnected? Aso also tried to put the apn setting, but when I try to save the apn setting, they disappear??
Anyone have any idea?
Thanks for the reply
you can use free unlock from general http://forum.xda-developers.com/showthread.php?t=2024514
but of course you have to do it from uvkl1. but--you can do a nandroid, and after you unlock it, restore your backup! it will stay unlocked
juna1103 said:
I put a metro pcs sim that has service on it, but when I try to make a call, it say, not register to network, and or mobile network disconnected? Aso also tried to put the apn setting, but when I try to save the apn setting, they disappear??
Anyone have any idea?
Thanks for the reply
Click to expand...
Click to collapse
Seems your phone's ROM/Radio mismatched or not for MetroPCS. This exactly happened to my phone also, until I flashed a new radio for my rom(I am using TMobile, flashed new TMobile ROM but not new Radio. Then it had the problems as you have now).
New sim fixed
cr2069 said:
Seems your phone's ROM/Radio mismatched or not for MetroPCS. This exactly happened to my phone also, until I flashed a new radio for my rom(I am using TMobile, flashed new TMobile ROM but not new Radio. Then it had the problems as you have now).
Click to expand...
Click to collapse
'' Thanks for the reply ''
The sim card I was putting in the phone was already register to a different phone.. I had to put a new sim, not active yet, then register the new sim to my imei and it worked fine.. I bought the phone used from ebay and it was already unlocked..
I am using unlocked SM-N910A On T-Mobile network. I am trying to enable video calling on Phone app. I checked setting under Phone app but did not find anything.
I also noticed that when I go to Settings -> More Settings - I see first 'Network or Sim card error' popup with ok button and after that other options (i.e caller id, call forwarding,auto redial etc) are loaded on screen.
Any input will be great if this can be done or limitation.
APN is fast.t-mobile.com
Settings -> Connections- > Mobile networks - > Mobile Data -> "Enhanced 4G LTE services" is checked.
ANDROID VERSION
5.0.1
BASEBAND VERSION
N910AUCU2COC6
KERNAL VERSION
3.10.40-4160876
I'm on ATT using the same phone, and I don't think ATT supports video calling on their phones. I don't know for certain, but my last 4 phones were all ATT and none of them had native video calling. I always had to use apps like Tango. I could just be in the same boat as you and just don't know how to activate the feature or something.
Sent from my SAMSUNG-SM-N910A using Tapatalk
spexwood said:
I'm on ATT using the same phone, and I don't think ATT supports video calling on their phones. I don't know for certain, but my last 4 phones were all ATT and none of them had native video calling. I always had to use apps like Tango. I could just be in the same boat as you and just don't know how to activate the feature or something.
Sent from my SAMSUNG-SM-N910A using Tapatalk
Click to expand...
Click to collapse
To: spexwood,
Thank you for reply.
I also noticed there is no wifi calling option. there is also "sim card or Network error" while setting forward calling.
Based on following links,it seems it is a limitation
https://www.att.com/shop/wireless/features/wifi-calling.html
https://www.att.com/esupport/article.html#!/wireless/KM1062034
5.0 is latest version on note 4? i tried to check update and it says u have latest version.
https://www.att.com/esupport/article.html#!/wireless/KB425932
uhs74 said:
To: spexwood,
Thank you for reply.
I also noticed there is no wifi calling option. there is also "sim card or Network error" while setting forward calling.
Based on following links,it seems it is a limitation
https://www.att.com/shop/wireless/features/wifi-calling.html
https://www.att.com/esupport/article.html#!/wireless/KM1062034
5.0 is latest version on note 4? i tried to check update and it says u have latest version.
https://www.att.com/esupport/article.html#!/wireless/KB425932
Click to expand...
Click to collapse
5.1.1 is the latest version, but the only way to OTA is to use an ATT sim card. You can Odin the files though.
I recommend updating just because 5.1.1 is much stabler, but I don't think it'll help you. I'm on 5.1.1 and as I said, I can't find any way to use video calling.
Link
http://forum.xda-developers.com/showthread.php?t=3230993
Sent from my SAMSUNG-SM-N910A using Tapatalk
spexwood said:
5.1.1 is the latest version, but the only way to OTA is to use an ATT sim card. You can Odin the files though.
Link
http://forum.xda-developers.com/showthread.php?t=3230993
Sent from my SAMSUNG-SM-N910A using Tapatalk
Click to expand...
Click to collapse
So for any future update on this phone, is it mandatory to use At&T sim card to get update to get if rom OTA? is Kies option?
I m using under T-Mobile network. ( I have no plan to be At&T customer)
Also are following points are know limitation of Note 4 AT&T?
1) No wifi calling option
2) No Video call
3) Call forwarding option always get "Sim or Network error" ( i tried to change sim card ,factory reset but no luck)
uhs74 said:
So for any future update on this phone, is it mandatory to use At&T sim card to get update to get if rom OTA? is Kies option?
I m using under T-Mobile network. ( I have no plan to be At&T customer)
Also are following points are know limitation of Note 4 AT&T?
1) No wifi calling option
2) No Video call
3) Call forwarding option always get "Sim or Network error" ( i tried to change sim card ,factory reset but no luck)
Click to expand...
Click to collapse
I can't answer any of the last 3 questions, but can the first few.
OTA (Over The Air update) is not possible without having an ATT sim and being connected to the ATT network.
With a different sim, the phone will ALWAYS say that no update is available and that your phone is up to date when it isn't.
Kies will act similar as to not having an ATT sim. ATT doesn't upload their updates to Kies.
The only way for you to update would be:
1) borrow someone's ATT sim card and use it to connect to the ATT network
2) go to a Best Buy with a Samsung Experience area and ask them to update your phone. They'll do it for FREE and it doesn't matter where you got your phone. You do need to tell them that you're using the ATT phone on a different network. This will male sure they flash the correct firmware and not brick your phone.
3) Use the latest Odin file to update your phone yourself. This is basically what they'll do at Best Buy, except that you'll be solely responsible for the outcomes of your phone. The Odin files are posted in the ATT Note 4 General thread. Just do a search for Odin.
Sent from my SAMSUNG-SM-N910A using Tapatalk
spexwood said:
I can't answer any of the last 3 questions, but can the first few.
OTA (Over The Air update) is not possible without having an ATT sim and being connected to the ATT network.
With a different sim, the phone will ALWAYS say that no update is available and that your phone is up to date when it isn't.
Kies will act similar as to not having an ATT sim. ATT doesn't upload their updates to Kies.
The only way for you to update would be:
1) borrow someone's ATT sim card and use it to connect to the ATT network
2) go to a Best Buy with a Samsung Experience area and ask them to update your phone. They'll do it for FREE and it doesn't matter where you got your phone. You do need to tell them that you're using the ATT phone on a different network. This will male sure they flash the correct firmware and not brick your phone.
3) Use the latest Odin file to update your phone yourself. This is basically what they'll do at Best Buy, except that you'll be solely responsible for the outcomes of your phone. The Odin files are posted in the ATT Note 4 General thread. Just do a search for Odin.
Sent from my SAMSUNG-SM-N910A using Tapatalk
Click to expand...
Click to collapse
Thank you for your reply.
Hi, everyone. I am using an unlocked at&t phone and trying to figure out how to use tmobile video calling on it. Is there a possible way to do it? Thanks.
I got Verizon Note 4.
Verified that it is unlocked. Not stolen. No contract binded from Verizon store and through phone (Clean phone)
Android Version : 5.0.1
Location: Las Vegas
Insert AT&T sim card. No signal.
Change APN setting following the information on AT&T website. Still not working. No signal.
At&t store rep. said I need to l unlock the phone ( I already check with Verizon via phone and store)
Verizon rep. on phone said: I should be able to use the phone with At&t sim card
Verizon Rep. in store said : Galaxy note 4 won't work on AT&T. It needs to be rooted by an expert. Only Galaxy S5 or later version will work.
I searched websites and many say that they are using Verizon Note 4 on AT&T network (At&t sim card)
I just need to use phone and text message. No data needed.
Anybody can help me?
I was able to use SIM from AT&T before yesterday, but after trying to update the firmware using Software Upgrade Assistant tool on Windows 10, it's now stuck at 'searching for service'.
Did you change the network settings from global to lte/GSM?
I am reading this. Maybe a solution.
Did you try to insert a different carrier sim card and entering the unlock code?
---------- Post added at 09:27 PM ---------- Previous post was at 09:24 PM ----------
After reading post i see you have a att sim sim on verizon phone. This could be a problem as verizon and att dont play nice. Stupid question is did you actually pay for service?
cozmohoot said:
Did you change the network settings from global to lte/GSM?
Click to expand...
Click to collapse
I did. Not working
It is not working. No verizon sim card message is gone but still no signal.
sam369 said:
I am reading this. Maybe a solution.
Click to expand...
Click to collapse
Yes I did. Not working
cozmohoot said:
Did you change the network settings from global to lte/GSM?
Click to expand...
Click to collapse
dayse said:
It is not working. No verizon sim card message is gone but still no signal.
Click to expand...
Click to collapse
Yeah. Me either.
Did you do a factory reset after software update. Usually helps. Also mess with APN settings. Reboot after changing APN.
Problem solved.
Changing APN settings and reboot did not work. I just inserted the Verizon SIM came with the phone and made a phone call. Of course it's not activated, so I hang up when it reached Verizon automated system. Guess what, now SIM from Lycomobile works. H2O Wireless SIM also works. It means that it now can work with AT&T and T-Mobile network.
sam369 said:
Problem solved.
Changing APN settings and reboot did not work. I just inserted the Verizon SIM came with the phone and made a phone call. Of course it's not activated, so I hang up when it reached Verizon automated system. Guess what, now SIM from Lycomobile works. H2O Wireless SIM also works. It means that it now can work with AT&T and T-Mobile network.
Click to expand...
Click to collapse
I'm in a similar boat as you (4.4.4 on Cricket Wireless, wanting to upgrade to 5.1.1). I just want to make sure I understand what you did to restore service:
1. You had phone working on AT&T with an older Android version (KK?)
2. You upgraded to a newer version via the Verizon upgrade tool (I assume 5.0.1 since 5.1.1 is not yet available via the tool)
3. You lost AT&T service after upgrade
4. You were able to restore AT&T service by using an inactive Verizon SIM and making a phone call
Is this correct? TIA
ftkftw said:
I'm in a similar boat as you (4.4.4 on Cricket Wireless, wanting to upgrade to 5.1.1). I just want to make sure I understand what you did to restore service:
1. You had phone working on AT&T with an older Android version (KK?)
2. You upgraded to a newer version via the Verizon upgrade tool (I assume 5.0.1 since 5.1.1 is not yet available via the tool)
3. You lost AT&T service after upgrade
4. You were able to restore AT&T service by using an inactive Verizon SIM and making a phone call
Is this correct? TIA
Click to expand...
Click to collapse
Mostly, except that I tried to upgrade from 5.0.1 to 5.1.1, but found that 5.1.1 was not yet available via the tool, but the process of installing the software on windows 10 and maybe I also used the Verizon SIM during the process which might have messed something up. I updated the firmware to 5.1.1 by downloading the zip file in a thread here and flashed it through recovery. The network connection problem was then solved by making a phone call with the SIM came with the phone.
sam369 said:
Mostly, except that I tried to upgrade from 5.0.1 to 5.1.1, but found that 5.1.1 was not yet available via the tool, but the process of installing the software on windows 10 and maybe I also used the Verizon SIM during the process which might have messed something up. I updated the firmware to 5.1.1 by downloading the zip file in a thread here and flashed it through recovery. The network connection problem was then solved by making a phone call with the SIM came with the phone.
Click to expand...
Click to collapse
I just updated via the Verizon tool (BPA1 finally showed up) and it was, surprisingly, perfectly fine. I first backed up as much as I can (via Smart Switch and Helium app), then pulled my mSD card, left my SIM card in the phone, and proceeded to update. After the first boot stuff (app optimization, etc.) I soon saw the AT&T sign in the notification bar, and I was able to make a phone call without doing anything else. With all the reports of SIM card locking after updating I was worried that I might run into the same issue, but was pleasantly surprised that I didn't. I had to re-enter the APN setting as the upgrade seemed to have removed it, but after re-adding Cricket's APN I was able to get cellular data as well.
Thanks again for your help
You need to access the hidden menu and change your radio and modem protocols. There's a forum on XDA called domestic and internation sim or network unlock for spring but should work the same on verizon
fyi, i got my note 4 working on gsm using 2 different freedompop sims-the at&t lte sim gets lte via band 4.
the global sim based on t-mobile did get hpsda+
just change the apn
Hello all, new here and I just purchased a Note 8 from Verizon. The device is paid off fully and i wish to use my T-Mobile simcard in it but it does not seem to be picking up a signal. I did update the verizon software to the latest version when i had my verizon sim card inserted. Verizon customer service told me i need to reset to factor setting then my t-mobile sim should work but this has not helped.
How can i get my t-mobile sim to work? Any help appreciated as i am new to android phones!
Thanks
Hi there, you must flash the new N950U1 2BQK1 or N950U 2BQK2 stock firmware to have full access of T-MOBILE Network. It's the only way it will work, I have AT&T NOTE 8 working on Verizon network with zero problem.
---------- Post added at 02:35 PM ---------- Previous post was at 02:31 PM ----------
It's a very easy process to flash the 4 US Carriers firmware, I have done it more than 50 times and I'm not a developer.
kdecoteau1 said:
Hi there, you must flash the new N950U1 2BQK1 or N950U 2BQK2 stock firmware to have full access of T-MOBILE Network. It's the only way it will work, I have AT&T NOTE 8 working on Verizon network with zero problem.
---------- Post added at 02:35 PM ---------- Previous post was at 02:31 PM ----------
It's a very easy process to flash the 4 US Carriers firmware, I have done it more than 50 times and I'm not a developer.
Click to expand...
Click to collapse
I would like to know where to get the firmware and with what do you flash it with? Is there a instructions thread or link.
It's been over 5 years since I have tinkered with a Samsung device.
Hi there. You'll need to have your Note 8 Bootloader version on level 2, meaning 2BQK2, 2BQJA or anything with 2 before the last 4 digits.
1) tmobile SIM card in device
2) Odin v3.12.7 make sure extract
3) 2BQK2 firmware extract all files
4) put all 4 set of firmware files in the right manner, bl,ap,cp and csc. Don't used home-csc only CSC.
Odin and firmware https://androidfilehost.com/?fid=673791459329067572 2BQK2
https://androidfilehost.com/?fid=962157660013069130 2BQL5
https://drive.google.com/open?id=1bRz4RQzmloSgsuYmyLu92cktT_f8hIYp
Unlock firmware
1) any carrier SIM card
2) Odin v3.12.5 Prince Comsey or modified Odin, make sure extract
3) 2BQK1 firmware, extract all files.
4) put all 4 set of firmware files in the right manner, bl,ap,cp and csc. Don't used home-csc only CSC
Odin and firmware https://androidfilehost.com/?fid=745849072291691586 2BQK1
https://androidfilehost.com/?fid=817906626617955896 2BQL2
https://drive.google.com/open?id=1Lw79Q5npvMRdME33-ioqy692ClZ36n4U
First instructions is for if you want stock US CARRIER BLOATWARE FIRMWARE, second instructions is if you want SAMSUNG STOCK FIRMWARE. Follow steps and everything will be fine, happy flashing.
So wait, I have a Verizon Note 8 (currently using MetroPCS perfectly), but I wanted a stock Samsung ROM (without the Verizon crap on it), I can just flash the second set of files instead and done with it?
Yes
Can I use a gsm sim card and a verizon sim card at the same time on verizon branded phone? I see you have to flash the firmware above but am wondering if this would help me.
So much misinformation in this thread.
I don't even know where to start:
The OP was asking why his T-Monile SIM wouldn't work. It doesnt matter which firmware you're on, if the Note 8 is unlocked (the Verizon Note 8 IS unlocked), and it has a clean IMEI, and your SIM is already activated, then it will get 4G LTE. I know. I have a Verizon Note 8, and use it on Tmobile. I used it for over 24 hours with my T-Mo SIM but running thr Verizon firmware with no issues. Only reason I flashed T-Mobile firmware was to rid myself of Verizon bloat and to get wifi calling.
As far as bootloader, that has no effect on the SIM card working. The OP would need a v2 bootloader firmware if his current firmwarealso had the v2 bootload. It probably does, so thats a moot point, but the implication was the v2 bootloader was the only one that would make his SIM work.
I hope the OP got it all figured out.
mmdpkaaa said:
Hello all, new here and I just purchased a Note 8 from Verizon. The device is paid off fully and i wish to use my T-Mobile simcard in it but it does not seem to be picking up a signal. I did update the verizon software to the latest version when i had my verizon sim card inserted. Verizon customer service told me i need to reset to factor setting then my t-mobile sim should work but this has not helped.
How can i get my t-mobile sim to work? Any help appreciated as i am new to android phones!
Thanks
Click to expand...
Click to collapse
If you want T-Mobile to work best follow the switching carrier guide to change CSC code to TMB and then flash the Latest T-Mobile Firmware...
https://forum.xda-developers.com/showpost.php?p=74087340&postcount=1
unitop4 said:
Can I use a gsm sim card and a verizon sim card at the same time on verizon branded phone? I see you have to flash the firmware above but am wondering if this would help me.
Click to expand...
Click to collapse
No way to dual SIM US models without trying to modify the SIM tray...and some have damaged trying to...
BlueFox721 said:
If you want T-Mobile to work best follow the switching carrier guide to change CSC code to TMB and then flash the Latest T-Mobile Firmware...
https://forum.xda-developers.com/showpost.php?p=74087340&postcount=1
No way to dual SIM US models without trying to modify the SIM tray...and some have damaged trying to...
Click to expand...
Click to collapse
plus the second SIM wouldn't have an IMEI assigned to it.
And I agree the OPs best bet is to flash thr T-Mobile firmware. But his issue was he wasnt getting a signal at all with his T-Mo SIM. Flashing firmware won't fix that. Source: I have a VZW Note 8 on T-Mo. Used it with the VZW firmware and a T-Mo SIM with no issues.
Mr. Orange 645 said:
plus the second SIM wouldn't have an IMEI assigned to it.
And I agree the OPs best bet is to flash thr T-Mobile firmware. But his issue was he wasnt getting a signal at all with his T-Mo SIM. Flashing firmware won't fix that. Source: I have a VZW Note 8 on T-Mo. Used it with the VZW firmware and a T-Mo SIM with no issues.
Click to expand...
Click to collapse
Another user had SIM issues and flashed back to factory (theirs was unlocked) then changed carriers and SIM worked again...sometimes a clean flash can work...
Hi all. For me I flash all firmware at clean wipe, never any issues. I have an unlock AT&T Note 8 unlock running the latest Verizon firmware with VZW SIM active. I also have a t-mobile S8+ unlock and running the latest U1 firmware and working with Verizon SIM active. I constantly switch my firmware between tmobile, verizon and at&t to see performance and what ever else feature added.
kdecoteau1 said:
Hi all. For me I flash all firmware at clean wipe, never any issues. I have an unlock AT&T Note 8 unlock running the latest Verizon firmware with VZW SIM active. I also have a t-mobile S8+ unlock and running the latest U1 firmware and working with Verizon SIM active. I constantly switch my firmware between tmobile, verizon and at&t to see performance and what ever else feature added.
Click to expand...
Click to collapse
How did you get ATT N8 to work on VZW? I flashed my Tmo to VZW and i could never get speeds above 1mpbs. Even with unlocked firmware it did not get anywhere with VZW. I heard that its because the IMEI is not in VZWs database.
Hi there. My AT&T Note 8 works great on Verizon network, it's running the latest N950U1 Firmware 2BQL2, everything works great. It will work good on T-Mobile too, lately tmobile network giving trouble, sometimes less than 1 mbps on download. Since June 2017 I been having trouble with tmobile network in my area and around, so I switch to Verizon, couldn't bother the crappie service. My location I get 215 mbps on my note 8, IPhone 8 plus 147mbps download. I prefer Tmobile but it's not working good in area anymore.
[/COLOR]
Mr. Orange 645 said:
plus the second SIM wouldn't have an IMEI assigned to it.
And I agree the OPs best bet is to flash thr T-Mobile firmware. But his issue was he wasnt getting a signal at all with his T-Mo SIM. Flashing firmware won't fix that. Source: I have a VZW Note 8 on T-Mo. Used it with the VZW firmware and a T-Mo SIM with no issues.
Click to expand...
Click to collapse
@Mr. Orange 645
I currently have a Verizon Note 8 with a TMO SIM and I'm getting 4GLTE but a few problems. Most of the incoming calls forward to voicemail and all outgoing calls the data has to drop completely before the call can connect. Will doing the carrier switching updates listed in the link above as well as flashing T-Mobile firmware assist with this problem? The phone is on 2BQK2 currently.
Pastor X said:
[/COLOR]
@Mr. Orange 645
I currently have a Verizon Note 8 with a TMO SIM and I'm getting 4GLTE but a few problems. Most of the incoming calls forward to voicemail and all outgoing calls the data has to drop completely before the call can connect. Will performing the carrier switching updates listed in the link above as well as flashing T-Mobile firmware assist with this problem? The phone is on 2BQK2 currently.
Click to expand...
Click to collapse
Nevermind, I fixed it. I had to perform the carrier switch and flash Tmo's firmware. Running perfectly!
Pastor X said:
[/COLOR]
@Mr. Orange 645
I currently have a Verizon Note 8 with a TMO SIM and I'm getting 4GLTE but a few problems. Most of the incoming calls forward to voicemail and all outgoing calls the data has to drop completely before the call can connect. Will doing the carrier switching updates listed in the link above as well as flashing T-Mobile firmware assist with this problem? The phone is on 2BQK2 currently.
Click to expand...
Click to collapse
Omg exacly whats happening to me? So what steps have you guys followed? Should I switch to T-mobile, or to factory unlocked?
I have Verizon phone, unlocked, and I use T-mobile sim card.
I would appreciate the help
Sent from my SM-N950U using Tapatalk
Verizion note8 with tmobile sim card
This is what happened when I changed carriers from the original verizon note8, on verizon network, with verizon sim and the most recent verizon pie update, to a carriers sim, that is tmobile service. And what happens, I didn't even think was possible... I put the new carriers sim in, truconnect, booted and let the phone register the new sim and network. Checked for update.... the was one, let the phone download and update. And you know how Verizon's boot logo is... it wasn't anymore. Booted the tmobile boot logo and sounds, strange. I'm not super noob and the little bit of knowledge and experience that I do have with roms and updates across carriers usually require physically flashing the rom. Correct me if I'm mistaking. Continuing.... optimizing apps....., huh?! The update flashed the tmobile software, without effecting any personally installed apps. Though the update did remove all the verzion software/bloatware, without permissions, and installed tmobile apps. 2 that are meant for user usage. They are tmobiles device unlock and the tmobile app. Which I might add, do not function, I surmise, because in not on the actual main tmobile network, but a scabbed on. I have never seen or experienced anything of the short. Please tell me if this is normal.? I was a bit upset. I did not give any carrier the permission to delete or install any app on my phone. But maybe things have changed since I dabbled. And If they have, maybe this might help the people that have been using Odin to get tmobile version rom while originally being a verzion phone. I dont think it's normal. Please tell me if this has happened to you.
I have a att note 10+ that I sim unlocked it will take a Verizon sim and work 100% but it will not work with straight talk i have no service can't call text and no data every once in awhile a text will get thru but can anyone help me with this I can't root because I can't oem unlock unless there is another way any help would be appreciated
ackaite said:
I have a att note 10+ that I sim unlocked it will take a Verizon sim and work 100% but it will not work with straight talk i have no service can't call text and no data every once in awhile a text will get thru but can anyone help me with this I can't root because I can't oem unlock unless there is another way any help would be appreciated
Click to expand...
Click to collapse
Did you set the APN information correctly?
Also are you using the N975U1 firmware or the standard AT&T firmware?
Are you using the BYOD sim card from straight talk?
What have you done over the phone with Straight Talk as far as troubleshooting? - this one can be important. If the phone isn't working with straight talk only it maybe a configuration (apn setting) or provisioning issue.
Are you sure the device is compatible with the area or region your in?
What provider/tower (Verizon, AT&T, etc.) does straight talk have you going through?
More information on what you have done to setup the phone for straight talk, troubleshooting steps you have taken, what information straight talk may have provided (etc. etc.) will help others be able to help you. Providing little or no details makes it rather hard to offer any help.
The apn won't let me put dun in the type I sim unlocked it with a puk code and got strighttalk byop I tried flashing the U1 firmware to it wouldn't take it so I did a Verizon firmware thinking that might help and same thing with the striaght talk it doesn't wanna work i put a Verizon sim in it and it works just like it did on ATT so I'm confused as to why the straight talk sim won't work they can't figure it out on their end either
I factory reset the phone reset network settings did just about everything I could with the phone besides it being funny about the apn cuz it says apn cannot be changed on this device if you put dun in the apn type i dunno the only thing I notice is when the Verizon sim card is in the phone the network mode is set to global whereas with the striaght talk its LTE/CDMA and it won't let you change it to global
ackaite said:
The apn won't let me put dun in the type I sim unlocked it with a puk code and got strighttalk byop I tried flashing the U1 firmware to it wouldn't take it so I did a Verizon firmware thinking that might help and same thing with the striaght talk it doesn't wanna work i put a Verizon sim in it and it works just like it did on ATT so I'm confused as to why the straight talk sim won't work they can't figure it out on their end either
Click to expand...
Click to collapse
Straight Talk uses different mobile providers to offer service different areas.. They utilize Verizon, AT&T, Sprint and T-Mobile (Sprint and T-Mobile have merged recently, but Sprint towers are still active).
I have seen posts across the internet that indicate you should be using the U1 firmware on the phone.. I would make sure your converting the phone to the U1 firmware properly.
If I recall correctly (this is how I did it previously) when flashing the U1 firmware make sure your doing it without the sim card installed and using the non home_csc file. Factory data reset the phone after you successfully flash the U1 firmware and then insert the sim card after setting the phone back up (so it can apply the new sim/network settings).
I would strongly suggest you do not restore a backup during initial setup when you do this. If you restore a backup it may restore previous network settings/configurations that were for what you had previously.
If flashing U1 firmware doesn't help (and since this this is a Straight Talk specific issue) then it's more then likely on the end of Straight Talk. I would call them and make sure that your sim card is the correct one for the cell towers they have you going through and the phone you have. Using an incompatible sim card (or one that is faulty) can cause issues like this. You can also have them send you another sim card to try.
Also contact them to make sure the service is properly provisioned and activated on your phone. Double check the APN with them, and see if they have an alternative one to try. It is also possible that a service outage maybe (or issue with Straight Talk internally) in your area, so I would call them to make sure that neither are not the case here.
ackaite said:
I factory reset the phone reset network settings did just about everything I could with the phone besides it being funny about the apn cuz it says apn cannot be changed on this device if you put dun in the apn type i dunno the only thing I notice is when the Verizon sim card is in the phone the network mode is set to global whereas with the striaght talk its LTE/CDMA and it won't let you change it to global
Click to expand...
Click to collapse
The Global setting doesn't really matter in this case and your phone will be set to use the towers that Straight Talk has you going through.
The only thing that I can think of that would be a problem with network mode is if your sim card from straight talk is meant for a different provider then the towers they use in your area (i.e. sim card is for AT&T but the provider they have for the area is Sprint).
the straight Talk sim works in other phones no problem a s8 and a older note im thinking att has something in the software to block other apns i dunno i unlocked it with a PUK code and flashed verizon firmware on it thinking i could get passed it but the verizon sim works 100% and the att sim works 100% too but a straighttalk sim card (verizon) towers the phone tries it shows 4g and disappears and then it shows it has service but cant call it just says emergency calls only
ackaite said:
the straight Talk sim works in other phones no problem a s8 and a older note
Click to expand...
Click to collapse
I would not use older phones as a means to say the sim card is good. Besides that's irrelevant to what is going on with the Note 10+
ackaite said:
im thinking att has something in the software to block other apns
Click to expand...
Click to collapse
Then this means one of two things... Either you didn't get the phone unlocked or else you did not convert to another carrier (or the U1 firmware XAA region) correctly.
If your using the unlocked firmware (U1 XAA region) then you should be able to edit the APN. If not then you should be able to create one.
ackaite said:
i dunno i unlocked it with a PUK code and flashed verizon firmware on it thinking i could get passed it but the verizon sim works 100% and the att sim works 100% too but a straighttalk sim card (verizon) towers the phone tries it shows 4g and disappears and then it shows it has service but cant call it just says emergency calls only
Click to expand...
Click to collapse
That sounds like either the sim card isn't good, the phone was not activated/provisioned properly in there systems (call them and double check IMEI and model information), the phone is not compatible with the service they offer in your area (I suggest using the XAA region U1 firmware in this case) or else your phone is not fully unlocked.
I would also suggest google searching or else asking them for any updated or alternative APN's to try. It maybe very likely the one you have is not suitable for the phone/area... It wouldn't be the first time I have had an issue similar to this like this.
I am opt to believe the first 3 are the most likely scenarios since the phone works on Verzion with the sim card per your indication.
Yeah and the only reason I tried the older phone is to see if the sim card is activate with the number and the phone itself pulled the apn from network when I tried to flash to U1 the phone gave me a error but it took the Verizon firmware for the 975U but its still not working do you know of a good link for the firmware your talking about so I can try that
ackaite said:
Yeah and the only reason I tried the older phone is to see if the sim card is activate with the number and the phone itself pulled the apn from network
Click to expand...
Click to collapse
From personal experience I would advise in the future you don't do that. When you activate the phone you should activate the one you are using and definitely do not use an older phone to activate a newer phone. I have had many problems with this in the past as provisioning for an older phone didn't always work for my newer ones..
ackaite said:
when I tried to flash to U1 the phone gave me a error but it took the Verizon firmware for the 975U but its still not working do you know of a good link for the firmware your talking about so I can try that
Click to expand...
Click to collapse
I waited for you to give more information on the issue, but you didn't. So I am sorry, but if you don't provide the details of what is going on it makes helping you very difficult. You didn't say what error you are getting, what the firmware version(s) are of what your trying to flash and what is currently on the phone.
Here's the last piece of help I can offer now.
I can tell you that the following can be found on the forum by searching:
Links and how to obtain the firmware - Multiple threads asking the same question exist here. Also Frija, SamFirm, SamMobile are just a few examples of what can be found referenced here.
Bootloader version(s) - what will happen when you try to downgrade and what will happen (along with a important thing) when you upgrade.
Websites to find firmware - SamMobile and some others have been mentioned.
Patched Odin - In case you need the latest version it has been mentioned here already.
I can also tell you that by using Google and searching for SM-975U1 XAA on Sammobile does in fact work.
Brother give me root file for note 10 plus SM-N975U android 10 version one Ul version 2.5 plz help me