Related
Hey there people, nice to see flood of very good roms for our BAs around the forum any beyond. However, some of them do have issues, such as SMS notifications (I try to deal with those using Smiley SMS), but very annoying in some issues is also the alarm clock, which sometimes simply fails to work, and that can be very annoying.
Therefore, does anyone can recommend some good alarm clock application which will work reliably on WM 6 (ROM 5.63.11).
Thanks
whats wrong with the wm06 built in alarm clock?
Try pTravelAlarm http://www.burroak.on.ca/pta.html
For me GS Alarm Clock is the best...and it's free
SPB time 2 its OK
I was lookin' 4 a good alarm for about 2weeks and then I've found its really good. you can choose whole mp3. Pocketalarm http://rapidshare.com/files/18010275/PocketAlarm.v2.16.rar.html
Thanks for good suggestions people, I really had a hard time, since for some stupid reason the built in alarm clock was highly unreliable - sometimes it works and sometimes it didn't even though everything was set correctly (which led to me being late for work and a bug in the ROM cannot be used as an excuse ). It could be because of the ROM I am using. I tried all of those you suggested and GS is really neat.
Thanks everyone for a lot of help.
alsaliho said:
Hey there people, nice to see flood of very good roms for our BAs around the forum any beyond. However, some of them do have issues, such as SMS notifications (I try to deal with those using Smiley SMS), but very annoying in some issues is also the alarm clock, which sometimes simply fails to work, and that can be very annoying.
Therefore, does anyone can recommend some good alarm clock application which will work reliably on WM 6 (ROM 5.63.11).
Thanks
Click to expand...
Click to collapse
There is absolutely no problem with WM6 Alarm system.
I thoroughly checked it up and noticed following correct behavior:
1. System updates registries as soon as any alrm settings are changed
2. Notification queues are issued for the week replacing any other available for the week.
I am positive that system is working correctly.
What must have gone wrong with some of your devices that you must have taken system backup without clearing alarm settings totally and must have later on after hard reset, restored the backup. This would reinstall old queues as well new when you setup new alarms. You can get away with this issue by clearing all those notification queues still residing in the database.
If this works for you, make sure you always takeback with no alarms settings.
Thanks for the info, however, anytime I did new rom upgrade I did it without doing any backup, which means all settings were manually set after the upgrade - which means no backups to mess up the settings. Oh well, not a big deal anyway, as I said in my previous post that GS Alarm Clock, which I took later works perfectly.
Thanks anyway,
hi everyone!
is there a way to add custom sounds for the wm06 built n alarm clock?
and maybe for the reminders too?
if i move wav files to the windows folder, those file names show up in the sounds drop down menu, but wont play....
anyone?
regards,krz
Are you sure they are the correct wav files?
April 1 said:
Are you sure they are the correct wav files?
Click to expand...
Click to collapse
well... at least, i am sure, that they are WAV files and i can play them back in TCMP!
are there certain specifications, that wav files have to meet in order to be used as an alarm clock sound...? (eg.: max. file size, mono/stero, quality,...) ??
is it confirmed,that this should actually work that way (meaning to copy a wav file into windows folder for alarmclock use) ??
answers appreciated!
regards,krz
EDITED TO SAY: okay, it seems, that size, etc. does matter! i just got one working (redalert.wav)
anyone knows the excact secifications for working wav files...? is it just the size? or maybe the length of the file too?
Sound control
The problem i always had with the BA is the fact that the alarm would not go off if the phone is on silent. Which i keep my phone on most of the time, So when i forget to turn it on at night... I get get to yell "Oh Crap, Look at the time" to my wife.
Is there a program that will make sure the alarm goes off even if the sound is silent,
or is there a program that will change the sound at certian times, like at 6am turn sound on, at 9am turn sound off, then at 6pm turn sound on again?
Thanks
Again,
I must advise SPB Time, I do realise it isn't a free app but it's to my opinion the best, define as much alarms as you want, select mp3's or anything, it puts your volume to maximum if you choose so, or play ascending... and my favorite, upon alarm your comploete screen blanks and you have 2 huge buttons snooze and dismiss which you can't miss even with only 1 eye open... ;-)
The best is PocketAlarm. Try it u wont regret it. Link is on the first page. u can choose mp3 files not only wav.
I have just started using SPB Time... its a great program. You can set up as many alarms as you need, have them go off on certain days of the week. Everything is customizable, the repeats, the time it plays, length of snooze.
When the alarm goes off, there are nice large dismiss and snooze buttons.
nobody is talking about program size and memory usage on device, two criterias, which are very important for such a program....
which one is the smallest and lightest?
interessted,
krz
The cab for SPB Time is approx 4.42mb. Memory usage is not really a problem because the program doesn't need to be running for the alarms to work.
Pocket Alarm can not be used if you lock your phone it seems. Phone first has to be unlocked, which is not the case with e.g. ptravelalarm.
Alarm Clock Lite is free
For PPC and SP
CT Alarmclock is free to, only for SP
SpoonAlarm is free too. For all devices also 240*240 screens
I'm trying to make my own monthly Calendar in Zooper, but i have a big problem. When i say, in advanced parameters, to calculate the day of the week with this string: #D$(#DyMM#010000)$f# i obtain 0 if it's sunday, 1 if it's monday and so on. The problem is that i need to obtain 7 if it's sunday, becaus in italian format week start on monday and finish on sunday.
I can't check it in this way: $#D$(#DyMM#010000)$f#=0?7$ because zooper doesn't recognize nested $...
I think the only way is to change the $(expression)$ for math expressions using another char (maybe § or similar).
Any suggest?
N3V3RM1ND said:
I'm trying to make my own monthly Calendar in Zooper, but i have a big problem. When i say, in advanced parameters, to calculate the day of the week with this string: #D$(#DyMM#010000)$f# i obtain 0 if it's sunday, 1 if it's monday and so on. The problem is that i need to obtain 7 if it's sunday, becaus in italian format week start on monday and finish on sunday.
I can't check it in this way: $#D$(#DyMM#010000)$f#=0?7$ because zooper doesn't recognize nested $...
I think the only way is to change the $(expression)$ for math expressions using another char (maybe § or similar).
Any suggest?
Click to expand...
Click to collapse
Is your system locale set to italian or are you using it another language (like english for example)? If the later, did you try setting the widget locale to italian?
kwerdenker said:
Is your system locale set to italian or are you using it another language (like english for example)? If the later, did you try setting the widget locale to italian?
Click to expand...
Click to collapse
It's italian.
N3V3RM1ND said:
It's italian.
Click to expand...
Click to collapse
Then it's probably a bug with Zooper. You should get in touch with the developer to clear it up.
kwerdenker said:
Then it's probably a bug with Zooper. You should get in touch with the developer to clear it up.
Click to expand...
Click to collapse
I'll wait for Richard's reply, if anyone have suggestions...
kwerdenker said:
Is your system locale set to italian or are you using it another language (like english for example)? If the later, did you try setting the widget locale to italian?
Click to expand...
Click to collapse
Hey can you provide full tutorial for make monthly calendar in zooper? Thanx:good:
N3V3RM1ND said:
I'm trying to make my own monthly Calendar in Zooper, but i have a big problem. When i say, in advanced parameters, to calculate the day of the week with this string: #D$(#DyMM#010000)$f# i obtain 0 if it's sunday, 1 if it's monday and so on. The problem is that i need to obtain 7 if it's sunday, becaus in italian format week start on monday and finish on sunday.
I can't check it in this way: $#D$(#DyMM#010000)$f#=0?7$ because zooper doesn't recognize nested $...
I think the only way is to change the $(expression)$ for math expressions using another char (maybe § or similar).
Any suggest?
Click to expand...
Click to collapse
Sorry; but I don't understand where is the problem...
(I'm Italian)
Why is it important for you have 7 on sunday instead 0?
Could you explain why for you this is important?
HyperAbarth said:
Sorry; but I don't understand where is the problem...
(I'm Italian)
Why is it important for you have 7 on sunday instead 0?
Could you explain why for you this is important?
Click to expand...
Click to collapse
Because the whole calendar is out of layout. I have the 7th day after saturday... i can't do a screenshot now, 'cause i removed the widget... if you nedd one i can reinstall it.
I'm having the same problem. Using the code [ox]44*#D$(#DyMM#050000)$f#-30[/ox]
[oy]22*#D$(#DyMM#050000)$W#[/oy]
Zooper automatically put the number in the correct position in a grid, but this cause many problem with Sunday.
I was wondering if there's a way to change 0 to 7 using advanced code, but no success til now...
Inviato dal mio Nexus 5 utilizzando Tapatalk
Please make a tutorial video
Sent from my SPH-L710 using xda app-developers app
I added days to shift Sundays to end and used % operator to move the remaining days. Now Sundays have to be moved to previous week as well, which required a different technique to compute y offset. Lastly hide 29, 30, 31st if they aren't valid for current month.
Example for day 31 is
[ox]12+23* ((#D$(#DyMM#310000)$f# +5)%7)[/ox]
[oy]2+19*(floor( (#D$(#DyMM#010000)$f#-3+31)/7)+1)[/oy]
[c]$#Dl#<31?#00000000$[/c]
Complete widget is also attached.
Thanks button click?
For those who want to understand code:
12 is x margin, 23 is column width, every day is shifted by 5 so Sunday(1) becomes 6 and week days range between 0 and 6
2 is y margin, 19 is row height, add the day number(31) to the location of 1st day of month and divide by 7 to get week number. floor to discard fraction part. 3 is subtracted to cater for certain changes like 1-7 range change to 0-6 range, Sunday shift etc. first week is 0, 1 is added to all weeks to have week range 1-5 , instead of 0-4
Yesterday I downloaded the template and "installed" on my Smartphone (just for test) but I had a problem.
In your attached image I see a correct Montly Calendar but if I create a Widget using your Template I obtain a Montly Calendar but there is a problem:
(unfortunately I can't post one image because I've already deleted widget and template from my smartphone)
I've same header (Mo, tu, we, etc)
But all the days of the month are "shifted" !?!?! for example 18th isn't under "Sa" Column but is under "Fr" Column ... 19th isn't under "Su" Column but is under "Sa" Column ... etc.
The same error for all days.
I didn't have investigated about the reason of this mistake because I don't need this Widget; I've made only a test ...
HyperAbarth said:
Yesterday I downloaded the template and "installed" on my Smartphone (just for test) but I had a problem.
In your attached image I see a correct Montly Calendar but if I create a Widget using your Template I obtain a Montly Calendar but there is a problem:
(unfortunately I can't post one image because I've already deleted widget and template from my smartphone)
I've same header (Mo, tu, we, etc)
But all the days of the month are "shifted" !?!?! for example 18th isn't under "Sa" Column but is under "Fr" Column ... 19th isn't under "Su" Column but is under "Sa" Column ... etc.
The same error for all days.
I didn't have investigated about the reason of this mistake because I don't need this Widget; I've made only a test ...
Click to expand...
Click to collapse
That is a know bug. It's because the "day of the week (number)" tag #Df# produces different numbers based on the locale of the device it's used on. Sometimes Sunday is 0, sometimes it's 7 for example.
The developer is aware of it but has not yet provided a solution.
On my Smartphone #Df# for Sunday return 0 (in some widget I make tests on 0 or 6 to color Saturday and Sunday).
You speak about " the locale of the device" to set 0 or 7; where can I set this "locale"?
I'm Italian and I set Language, time, date format, etc. for Italy ... but in Zooper Sunday is 0.
HyperAbarth said:
On my Smartphone #Df# for Sunday return 0 (in some widget I make tests on 0 or 6 to color Saturday and Sunday).
You speak about " the locale of the device" to set 0 or 7; where can I set this "locale"?
I'm Italian and I set Language, time, date format, etc. for Italy ... but in Zooper Sunday is 0.
Click to expand...
Click to collapse
Locale is the language option set for the device. I have mine set to English (US) and for me sunday is 1. If I set it to German it's 0. So maybe I got the 7 wrong and it was 0 and 1 but I'm sure I also read something about a 7... I have to check up on that.
Either way: there is no constant way of determining the value of #Df# and that is why calendar templates based on this method are screwed up on some devices.
Know if upcoming updates will correct this bug?
Enviado desde mi LG-P700 mediante Tapatalk
joseelche said:
Know if upcoming updates will correct this bug?
Enviado desde mi LG-P700 mediante Tapatalk
Click to expand...
Click to collapse
No, the developer has not yet announced anything specific about this.
It also has to be said that this isn't a bug strictly speaking. Different cultures have different ideas when a week "starts". In europe it's mainly on monday while in north america sunday is the first day of a new week. So the different output of #Df# is actually correct. It just produced unexpected behavior when used for something like this monthly calendar.
Normal Calender
qaiser said:
I added days to shift Sundays to end and used % operator to move the remaining days. Now Sundays have to be moved to previous week as well, which required a different technique to compute y offset. Lastly hide 29, 30, 31st if they aren't valid for current month.
Example for day 31 is
[ox]12+23* ((#D$(#DyMM#310000)$f# +5)%7)[/ox]
[oy]2+19*(floor( (#D$(#DyMM#010000)$f#-3+31)/7)+1)[/oy]
[c]$#Dl#<31?#00000000$[/c]
Complete widget is also attached.
Thanks button click?
For those who want to understand code:
12 is x margin, 23 is column width, every day is shifted by 5 so Sunday(1) becomes 6 and week days range between 0 and 6
2 is y margin, 19 is row height, add the day number(31) to the location of 1st day of month and divide by 7 to get week number. floor to discard fraction part. 3 is subtracted to cater for certain changes like 1-7 range change to 0-6 range, Sunday shift etc. first week is 0, 1 is added to all weeks to have week range 1-5 , instead of 0-4
Click to expand...
Click to collapse
Alright so you got the calender to work for Monday throught Sunday, How would the advanced parameters look for a calender Sunday throught Saturday. I can't seem to adjust your calender to work that way. I also could not figure out the X and Y margins. Nothing shifted correctly everytime I tried to change the X and Y for a larger widget. Thanks
Can yor macke .zw fail pls.
I've imported this widget, but there's a problem: in months where the first (of jan, of feb,of mar...) is on Sunday = the last day in week, it is shown in the same row with day names (you can see it in SS).
Does anybody know how to solve it?
Is it possible in Zooper Widget Add days to Date to obtain one other date?
If I set a Text in this way:
#DyMMdd#
today I see 20140112
If I write:
$(#DyMMdd#+10)$ I see 20140122
If I write:
$(#DyMMdd#+20)$ I see 20140132
This is a wrong Date; whitch is the correct syntax to add days to Date and obtain a correct date?
HyperAbarth said:
Is it possible in Zooper Widget Add days to Date to obtain one other date?
If I set a Text in this way:
#DyMMdd#
today I see 20140112
If I write:
$(#DyMMdd#+10)$ I see 20140122
If I write:
$(#DyMMdd#+20)$ I see 20140132
This is a wrong Date; whitch is the correct syntax to add days to Date and obtain a correct date?
Click to expand...
Click to collapse
Currently. no. But if I remember it correctly there was something like that announced for the next release of Zooper. Probably have to wait till then
kwerdenker said:
Currently. no. But if I remember it correctly there was something like that announced for the next release of Zooper. Probably have to wait till then
Click to expand...
Click to collapse
I downloaded Zooper Pro a long time ago and only used it at its most basic. Now that I am trying to dig a bit deeper, I've come to learn Zooper appears to be dead with respect to future improvements. Did this improvement adding to a Date to result in a new date ever happen? Did anyone determine a way to do this? I would like to do some conditional Ifs to determine if I want today's weather, tomorrow's weather or the next day based on the current time of day. The only way I can see doing this is with a way to do a "DateAdd" for lack of a better word. Is it possible yet?
Thanks!
I think
$(#D+28800yMMdd#)$
Where 28800= 20days * 24 hours * 60 min
Is there a way to highlight today's events in a different color font using the Zooper Themer Widget? I know this can be done using the integrated Zooper Calendar Widget (old Simple Calendar Widget) but I like the flexibility afforded by the Themer version. Perhaps using conditionals to test if an event occurs today?
thunderboy19 said:
Is there a way to highlight today's events in a different color font using the Zooper Themer Widget? I know this can be done using the integrated Zooper Calendar Widget (old Simple Calendar Widget) but I like the flexibility afforded by the Themer version. Perhaps using conditionals to test if an event occurs today?
Click to expand...
Click to collapse
bump!
Hi.
I use this code under Advanced Parameters to highlight (bright yellow) today events:
[c]$#C0SD#=#SDATED#?#ffffff00#$[/c]
if you have several lines in your calendar showing next events you have to change the number 0 in C0SD to the apropiate one (0=first event, 1=second event and so on)
@cierzo I tried what you suggested, but that's just not working. So by trial and error, I got this, and its working. It highlights the "Today Events" in white otherwise they're left gray (default color, in my case)
[c]$#C0SEEEE#=#DEEEE#?#ffffffff$[/c]
@thunderboy19 hope this helps.
Was thinking of the same issue yesterday, until I found your post.
sent from my BatPhone.
According to this page
w w w .zooper.org/wp/android/zw/variables-reference[/url]
(sorry, can't post links so, please, remove spaces to get there)
#DEEEE# stores the name of the day in long format so I think that your code will highlight any future event at the same weekday than today.
Don't know where I found the code that I posted but definetly is not correct thought worked for me.
Try this one instead:
[c]$#C0SyD#=#DyD#?#ffffffff$[/c]
"y" stands for year and "D" stands for day of year.
This should work fine
@cierzo my parameter is working just fine actually.
sent from my BatPhone.
karanrajkapur said:
@cierzo my parameter is working just fine actually.
sent from my BatPhone.
Click to expand...
Click to collapse
Try creating your next event (must be the first one as you are using C0S, can be in second, third,... using C1S, C2S...) on next friday, please.
cierzo said:
Try creating your next event (must be the first one as you are using C0S, can be in second, third,... using C1S, C2S...) on next friday, please.
Click to expand...
Click to collapse
@cierzo Well I have fb sync enabled, so I just changed the system date to 11th (as you might see in the screenshot) & it's just working fine. And its not that I'm arguing our trying to challenge your skill set, it's just what I came across over my usage experience. I may or may not be correct, but I'd learn by making corrections whenever this'd give any issues. No offence. Peace.
sent from my BatPhone.
No offence, dont' worry.
FIY I just tested your code and it's working as I said before: it highlights future events.
Anyway it's a fantasting widget with lots of possibilities.
I'll keep reading.
Cheers.
cierzo said:
No offence, dont' worry.
FIY I just tested your code and it's working as I said before: it highlights future events.
Anyway it's a fantasting widget with lots of possibilities.
I'll keep reading.
Cheers.
Click to expand...
Click to collapse
I suppose you're not changing the parameter values for the succeeding events. Like
C0SEEE for 1st,
C1SEEE for 2nd and,
C2SEEE for 3rd.
Cz all the events would be highlighted if you'd have set "C0SEEE" in all the lines. Hope you understood.
>>XPERIA Neo V<<
karanrajkapur said:
I suppose you're not changing the parameter values for the succeeding events. Like
C0SEEE for 1st,
C1SEEE for 2nd and,
C2SEEE for 3rd.
Cz all the events would be highlighted if you'd have set "C0SEEE" in all the lines. Hope you understood.
>>XPERIA Neo V<<
Click to expand...
Click to collapse
Let me explain:
Today is Saturday, April 5th
Imagine you have three events shown in your calendar and those events are today, next monday and next saturday
The #DEEEE# variable stores today's value: Saturday
#C0SEEE# stores 1st event day: Saturday. As #C0SEEE# = #DEEEE# ==> Highlighted
#C1SEEE# stores 2st event day: Monday. As #C1SEEE# != #DEEEE# ==> Normal
#C2SEEE# stores 3st event day: Saturday. As #C2SEEE# = #DEEEE# ==> Highlighted
(!= stands for not equal)
If you use other date values:
#DyD# stores 201495 (year 2014, 95th day of the year)
#C0SyD# stores 201495
#C1SyD# stores 201497
#C2SyD# stores 2014102
As you can see, only the first event value is equal to today's value.
@cierzo Now I got exactly what you meant.
Apologies.
Thanks bro.
>>XPERIA Neo V<<
I just came across this post and was hoping someone could fill me in. If my first event occurs today, then all the events are highlighted. Please let me know what I did wrong.
For the rich text I did edit text manually:
Code:
[tr=0,40][b ]#C0TITLE#[/b][/tr]
[c=#ffcccccc][tr=55][sr=0.7]#C0SMMM d HH:mm# - #C0EHH:mm# #C0LOC#[/sr][/tr][/c]
[tr=0,40][b ]#C1TITLE#[/b][/tr]
[c=#ffcccccc][tr=55][sr=0.7]#C1SMMM d HH:mm# - #C1EHH:mm# #C1LOC#[/sr][/tr][/c]
[tr=0,40][b ]#C2TITLE#[/b][/tr]
[c=#ffcccccc][tr=55][sr=0.7]#C2SMMM d HH:mm# - #C2EHH:mm# #C2LOC#[/sr][/tr][/c]
With advanced parameters:
Code:
$#C0SyD#=#DyD#?[c]#ffb8860b[/c]$
$#C1SyD#=#DyD#?[c]#ffb8860b[/c]$
$#C2SyD#=#DyD#?[c]#ffb8860b[/c]$
I'm trying to design a homescreen that's fairly compact and functional. Rather than displaying the actual events that will be occuring, I want to try and get my widget to tell me how many events are occuring today and tomorrow ie:
x events today, y events tomorrow.
However, I can't seem to find any method of possibly achieving this. Is it possible to get Zooper to count events between now and say, midnight?
I've searched around and i couldn't find anything (or I'm just bad at searching). Any help would be much appreciated!
brownenvelope said:
I'm trying to design a homescreen that's fairly compact and functional. Rather than displaying the actual events that will be occuring, I want to try and get my widget to tell me how many events are occuring today and tomorrow ie:
x events today, y events tomorrow.
However, I can't seem to find any method of possibly achieving this. Is it possible to get Zooper to count events between now and say, midnight?
I've searched around and i couldn't find anything (or I'm just bad at searching). Any help would be much appreciated!
Click to expand...
Click to collapse
As far as the exact syntax, I'd have to think on/test it, but logic-wise I might have a solution and from it you can hack through the syntax to make it work.
Firstly, Zooper can't count or support arrays or loops, etc. So, you'd have to find a way to get each event to equal a "(1)" and then add them all together.
The easiest way to do this would be with Tasker and then send over a single variable to Zooper, but Tasker's native Calendar app integration is somewhat hit or miss depending on device and Android version, etc.
So, how can we do this in Zooper? Well as I was typing this I tried testing a few different way and realized each time you perform a mathematical operation in Zooper the result is a display result and not a new number you can then add or subtract from something else.
Maybe someone has a solution though. Would be interested to see how it can be done without Tasker.
It seems the following would work for counting today's remaining events. All-day events may mess it up. The basic idea is to test if event n is today and event n+1 is not today. It would look like this
...
$#CnSyyyyMMdd#<=#DyyyyMMdd#&&#Cn+1SyyyyMMdd#>#DyyyyMMdd#?n+1$
...
Or,
$#C0SyyyyMMdd#>#DyyyyMMdd#?0$
$#C0SyyyyMMdd#<=#DyyyyMMdd#&&#C1SyyyyMMdd#>#DyyyyMMdd#?1$
$#C1SyyyyMMdd#<=#DyyyyMMdd#&&#C2SyyyyMMdd#>#DyyyyMMdd#?2$
$#C2SyyyyMMdd#<=#DyyyyMMdd#&&#C3SyyyyMMdd#>#DyyyyMMdd#?3$
$#C3SyyyyMMdd#<=#DyyyyMMdd#&&#C4SyyyyMMdd#>#DyyyyMMdd#?4$
$#C4SyyyyMMdd#<=#DyyyyMMdd#?5+$
You can expand it up if you want, but all this has to be on one line. You can probably shorten it with yy instead of yyyy. Now as far as tomorrow's events, good luck.
Wrong thread
Mokum020 said:
I came up with a similar solution for todays events as ewcrider (also should be one line in Zooper):
$#C0SddMMyy#=#DddMMyy#&&#C1SddMMyy#!=#DddMMyy#?1$ $#C1SddMMyy#=#DddMMyy#&&#C2SddMMyy#!=#DddMMyy#?2$
$#C2SddMMyy#=#DddMMyy#&&#C3SddMMyy#!=#DddMMyy#?3$
$#C3SddMMyy#=#DddMMyy#&&#C4SddMMyy#!=#DddMMyy#?4$
$#C4SddMMyy#=#DddMMyy#&&#C5SddMMyy#!=#DddMMyy#?5$
The difficulty is that the event number order changes so that the first upcoming event will always be C0, second C1 etc.
So for instance if you create the first event tomorrow it will be C0 but if you then create a event for today this will become C0 and the event for tomorrow will become C1.
Click to expand...
Click to collapse
This solution worked for me, as a simple cut and paste. Very crafty!!
Wrong thread
Mokum020 said:
Wrong thread
Click to expand...
Click to collapse
Why does every thread you posted in say "wrong thread" now?