My down volume button works, but doesnt click, the up button clicks when pressed, is this intentional or have i crushed the down button?
Xanthos58 said:
My down volume button works, but doesnt click, the up button clicks when pressed, is this intentional or have i crushed the down button?
Click to expand...
Click to collapse
mine clicks so maybe yours have a little issue
I have been pressing it often to get into boot loader so I assume I just crushed whatever clicks since the button works
Xanthos58 said:
I have been pressing it often to get into boot loader so I assume I just crushed whatever clicks since the button works
Click to expand...
Click to collapse
Is it in a case? My down volume didn't work, and I couldn't figure out why. I took it out of the case to find my sh*t was bent like an iPhone! AFTER 4 1/2 MONTHS!!!
The best thing is, that Advantage Program that is super cool is only available in the USA.
Thanks Obama!
xunholyx said:
Is it in a case? My down volume didn't work, and I couldn't figure out why. I took it out of the case to find my sh*t was bent like an iPhone! AFTER 4 1/2 MONTHS!!!
The best thing is, that Advantage Program that is super cool is only available in the USA.
Thanks Obama!
Click to expand...
Click to collapse
Just out of interest, what kind of case was yours in? I had mine in the Spigen crystal clear gel case since pretty much day one and I've just had my phone replaced (6 month old) after sending it in with a dodge and bent volume down button.
Have ordered a new case in case it was that but I guess the volume rocker must be a pretty thin strip of ali?
Tim
thebaldconvict said:
Just out of interest, what kind of case was yours in? I had mine in the Spigen crystal clear gel case since pretty much day one and I've just had my phone replaced (6 month old) after sending it in with a dodge and bent volume down button.
Have ordered a new case in case it was that but I guess the volume rocker must be a pretty thin strip of ali?
Tim
Click to expand...
Click to collapse
I had mine in an Otterbox Commuter
Related
I picked this up from a buddy who owns a accessory cart. Its a hard clear plastic on the back and a hard rubber around the sides. It covers the phone really nice and doesn't stick to your pocket like gel skins.
Heres some pics of it on the phone.
I haven't got mine yet, but if it's not the same case, it's very similar to this one http://forum.xda-developers.com/showthread.php?t=772826
Yup thats the case, great case.
Yeah other than the unlock/power button being a little troublesome its a great case. I found that since I normally unlock with my left hand I put the phone left top corner in the joint of my left thumb where it meets my palm and use my middle finger to push the unlock button. I'm not sure how I discovered it, but it seems to work every time after that.
Oh that which I mentioned above and its nearly impossible to cover the speaker hole if your volume is loud like mine is often after using Maps. My wife gives me the evil eye now and then when I turn it on in the morning.
Heres my photos of the phone in case.
http://s499.photobucket.com/albums/rr351/links4jeeps_kizer/Vibrant/
Is your power button cut out? I have the other case and hate that the power button not being cut out
Sent from my SGH-T959 using XDA App
rizzxx7 said:
Is your power button cut out? I have the other case and hate that the power button not being cut out
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
When I first got it the power/lock button was not cut out. After about 2 days I cut out the lock button.
speoples20 said:
When I first got it the power/lock button was not cut out. After about 2 days I cut out the lock button.
Click to expand...
Click to collapse
Sent from my SGH-T959 using XDA App
Do you mind telling us what you cut the button out with?
rizzxx7 said:
Sent from my SGH-T959 using XDA App
Do you mind telling us what you cut the button out with?
Click to expand...
Click to collapse
Xacto Knife
Can you shoot a photo and did it make a big difference?
Never mind on the photo you can see it up above.
kizer said:
Can you shoot a photo and did it make a big difference?
Never mind on the photo you can see it up above.
Click to expand...
Click to collapse
Heres the hole I cut. Gonna make it a little bigger and clean it up when I get a chance.
I got this case a couple days ago and I found that putting a small piece of paper the size of the indent for the unlock button makes the unlock/power button much easier to push. Be careful to not put a piece that is too thick because it will constantly be pushing the button and your phone will be constantly restarting. It has been working perfect so far. I will update in a couple of days. Hope this helps,
Russ
I cut mine too. I used an Exacto knife and cut from the inside. Other than the fact that it's not tapered, you can't tell that it's not a factory cut.
I like it for the fact that it makes the button easy to press but I also like it because it makes it easier to figure out which end is the top of the phone in the dark.
they need to make this case with the buttons cut out, I had to switch back to my mesh cases
Pneumatic said:
I cut mine too. I used an Exacto knife and cut from the inside. Other than the fact that it's not tapered, you can't tell that it's not a factory cut.
I like it for the fact that it makes the button easy to press but I also like it because it makes it easier to figure out which end is the top of the phone in the dark.
Click to expand...
Click to collapse
LOL. I just feel for the USB cut out at the top.
kizer said:
LOL. I just feel for the USB cut out at the top.
Click to expand...
Click to collapse
It also has a decidedly round butt sticking out.
Not sure if this happened before I dropped it at Christmas or not... BUT...
My volume button is sticking out at the bottom. So the end that lowers the volume. It's all good up the top. Any ideas how I can, or where to get this, fixed. I'm in Sydney.
I opened the battery compartment to have a look, but there is a void sticker over one of the screws. So don't wanna go there unless its a guarantee fix.
Sent from my Desire HD using XDA App
Same problem here.. I can't find replacement part so I have ordered from ebay for shocking price for smallest piece is 19$ :S
thr r apps to control the volume in internal like mini info
Sent from my Desire HD using XDA App
kudoboi said:
thr r apps to control the volume in internal like mini info
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
i think you're totally missing the point. lol
anyway, can't you just push it in? give it a lil force until it snaps back into place. let me know what happens.
just noticed that I can increase volume on my DHD, but can't lower the volume. restarted it, thinking that it might be a sw bug, but it still doesn't work.
is this the issue you guys are experiencing?
hope it's easy to solve, since I'm in Brazil and bought the phone in Germany.
best regards
André
o reverendo said:
just noticed that I can increase volume on my DHD, but can't lower the volume. restarted it, thinking that it might be a sw bug, but it still doesn't work.
is this the issue you guys are experiencing?
hope it's easy to solve, since I'm in Brazil and bought the phone in Germany.
best regards
André
Click to expand...
Click to collapse
André, i really don't think so...
I'm getting same trouble, the button works fine, but the down side (to decrease volume) is a little out, if compared with up side that stays closer to the frame, looks like a "seesaw"... i believe you got a hardware issue...
Sent from my Desire HD using XDA App
I have same design issue. Upper part of button (volume up) is more inside the phone and volume down part sticks a bit out.
Still buttons work as they should.
Sent from my Desire HD using XDA App
I don't exactly have same issue but close.
My volume rockers work, it's just they both are sunken to bottom and haven't that normal touch i've seen on other DHDs
Kindda nasty. Has anybody went to HTC to fix that? I'd love to know before sending... or not
yeah it seemed so for mine too.. but then i dotn have much problem with mine ..
Had a similar problem for me within first 14 days of my contract, just sent it back and got a replacement under warranty with orange. Maybe HTC or your carrier can do the same thing.
arielc said:
Had a similar problem for me within first 14 days of my contract, just sent it back and got a replacement under warranty with orange. Maybe HTC or your carrier can do the same thing.
Click to expand...
Click to collapse
Thanks a lot, this is what I was looking for. I may send it sometime during exams (where I'll miss it less )
Got kind of the same problem, my volume down button is not nearly as responsive as my volume up button.
Got the same problem, my volume down button is not nearly as responsive as my volume up button.
OMG the bottom voice button is so weak..I am afraid of mine now...
my volume button popped out, doesn't sit flush and keep catching.
Added some glue to keep it held down, need to fit a replacement! Anyone know how to?
+1
I have same issue with volume key, seems quite a common problem, surely covered by factory warranty?
Fixed my volume button
I had the exact same problem with my volume rocker, the bottom part was sticking out but the top seemed all right.
I've just fixed it with a bit of glue and by only removing the battery lid.
For what it's worth, here's how I did it.
If you remove the battery lid you can gently pry out the loose end of the volume rocker, just a little so you can see what's supposed to hold it back.
There's a piece of plastic glued to the bottom of the volume rocker that's come partly undone.
I just put a toothpick between the case and the volume button, so it's sticking out.
Then I used another toothpick to get some superglue on the loose piece of plastic.
After that I removed the first toothpick and pressed down on the volume button for a bit.
Now it's all tight and snug like it used to be.
Be careful with the glue so you don't glue the rocker to the case or something.
Hey thanks if my breaks its gonna be useful!
Had this problem, bottom volume became almost completely unresponsive and has really been bugging me for a few months now, so today I took the whole aluminium volume rocker off, slightly different experience to the post above.
Basically it's constructed pretty poorly, the aluminium rocker forms a latch at the top which holds onto the body of the device above where the button is seated.
The bottom of the rocker then has a plastic flap which is glued into a hole to hold the rocker on, this flap had more or less come off for me, seems very poorly manufactured, so I pulled up more and the whole button came off.
The actual volume buttons themselves are very small and these are seated in the housing of the device between this latch at the top and the plastic flap at the bottom. The rocker has two pieces which push down on the buttons to operate them.
Some dirt and grime had built up in there so I scraped that all off first with the head of a Phillips size 00 screwdriver.
I put a very small balled piece of paper on top of the volume down button and it's now working fine again, I just need to glue that flap back down so the rocker doesn't come loose. If the piece of paper is too big the volume rocker won't go down at all so you have to get the size right, relieved to have a working volume button again though.
search the forum, someone wrote how he fixed his button using a bit of superglue. it works like a charm. basically the volume rocker is held onto the phone with a rubber base. with time the rocker comes unglued from the rubber base. if you use something thin, like a toothpick or a small cutting knife you can insert a very small amount of glue between the 2 and glue them back together. just don't overdo it with the glue or you'll end up gluing the rocker to the body! i did it on mine and now it's as good as new
Anyone here feel that the power button should be a bit less flush with the bezel (like the volume rocker). I'm having a hard time getting accustomed to it as I cannot feel for it as well. I know that once my Slim Case arrives, it should help with this as I'll be able to feel the cutout from it. However, I'm trying to decide whether I should exchange it while I'm in the 14-day window. What do you guys think?
I tried calling Sprint and having it exchanged over the phone, but they're making me go to a local store and have it noted as defective before they do it. I don't want to seem paranoid to the Sprint rep when I bring it in and complain about this. =/
Heck no. The only minor complain I have with my SGS3 is that I occasionally hit the volume rocker or power button by accident when holding the phone. I would prefer if they were recessed a bit or, at best, flush with the surface.
Want to exchange devices then?!
I thought mine had a defect because the power button is hard to press sometimes. lol!
Glad it's not just me.
Ascertion said:
I thought mine had a defect because the power button is hard to press sometimes. lol!
Glad it's not just me.
Click to expand...
Click to collapse
Are you exchanging it?
Sent from my badass Galaxy SIII.
akarol said:
Are you exchanging it?
Sent from my badass Galaxy SIII.
Click to expand...
Click to collapse
Nah, it's minor. lol
Sleestax said:
Heck no. The only minor complain I have with my SGS3 is that I occasionally hit the volume rocker or power button by accident when holding the phone. I would prefer if they were recessed a bit or, at best, flush with the surface.
Click to expand...
Click to collapse
Totally agree. Sometimes ill feel my phone vibrate while I'm holding it thinking I have a text or something when in actuality I unknowingly held the volume down. I'm hoping once I get my thin case this won't be an issue.
Sent from my SPH-L710 using Tapatalk 2
hey guys just a quick question, im very worried for some reasons. my buttons feel some what loose but not very loose. is this normal?
and when i press my power button in a certain direction it makes a creaking sound? im thinking my otterbox commuter case damaged it but is it okay? but its still fully responsive, and finally, when i click my home button dead center it makes a slight click noise like on an apple device. maybe not as loud but when i click the sides of the home button, no sound at all.
tmobile- galaxy sIII purchased brand new
GalaxyBoi14 said:
hey guys just a quick question, im very worried for some reasons. my buttons feel some what loose but not very loose. is this normal?
and when i press my power button in a certain direction it makes a creaking sound? im thinking my otterbox commuter case damaged it but is it okay? but its still fully responsive, and finally, when i click my home button dead center it makes a slight click noise like on an apple device. maybe not as loud but when i click the sides of the home button, no sound at all.
tmobile- galaxy sIII purchased brand new
Click to expand...
Click to collapse
I had the same problem with my home button, I just cleaned it with a pin around the edges and pressed it in different directions (Like pressing left, corners, bottom) and then wiped it with a wet paper towel which fixed my problem, its probably just dust build up?
If not you probably have to replace the buttons just get them from eBay.
52me52 said:
I had the same problem with my home button, I just cleaned it with a pin around the edges and pressed it in different directions (Like pressing left, corners, bottom) and then wiped it with a wet paper towel which fixed my problem, its probably just dust build up?
If not you probably have to replace the buttons just get them from eBay.
Click to expand...
Click to collapse
hi thanks for the tip! but do you know anything but the power button creaking problem?
GalaxyBoi14 said:
hi thanks for the tip! but do you know anything but the power button creaking problem?
Click to expand...
Click to collapse
No sorry I dont
Today I noticed that the volume rocker when pressing "volume up" is really loud compared to the "volume down" or the power button. Is this normal with the Pixel XL? Got it less then 3 weeks a go. used in a case from day one, never dropped and rarely pressing the volume rocker. Here a video to demonstrate the noise
https://www.dropbox.com/s/1iwu24mrxy0cx0f/20170127_162132.mp4?dl=0
Vivoin3d said:
Today I noticed that the volume rocker when pressing "volume up" is really loud compared to the "volume down" or the power button. Is this normal with the Pixel XL? Got it less then 3 weeks a go. used in a case from day one, never dropped and rarely pressing the volume rocker. Here a video to demonstrate the noise
https://www.dropbox.com/s/1iwu24mrxy0cx0f/20170127_162132.mp4?dl=0
Click to expand...
Click to collapse
mine clicks inconsistently. for the longest time I thought my case was pressing it down constantly or just was not seated properly, it turns out I had issues getting it to click without the case. I don't think my rocker is sitting properly within my phone so yeah
fatapia said:
mine clicks inconsistently. for the longest time I thought my case was pressing it down constantly or just was not seated properly, it turns out I had issues getting it to click without the case. I don't think my rocker is sitting properly within my phone so yeah
Click to expand...
Click to collapse
That's what I thought in the first moment too - today I replaced my Caseology case with the Tough Armor and that's when I noticed the difference. The rocker works fine but seen that I just got, I wouldn't like to have already a faulty unit. Oh well
Vivoin3d said:
That's what I thought in the first moment too - today I replaced my Caseology case with the Tough Armor and that's when I noticed the difference. The rocker works fine but seen that I just got, I wouldn't like to have already a faulty unit. Oh well
Click to expand...
Click to collapse
Sliding it up/down seems to get it to set in right and stays that way until I take the case off. I'm using a Spigen rugged armor case, works great and thought it was my case causing that problem for the longest time until it wouldnt click even without the case
Any input from other Pixel owners? Just want to know if this is normal or if I should get my one replaced
same thing with mine. maybe not as extreme (hard to compare with a video), but it doesn't bother me