Related
So my sister has an Attt Galaxy note 2. I want to format her phone and install aokp or cyanogenmod on it cause they are smoother and faster roms. I searched on how to unlock and root the Galaxy note 2 but i've only found a bunch of guides showing how to root the phone, i haven't found one telling how to unlock the bootloader?
does anyone know how to unlock the GN2 bootloader, or is it already unlocked?
jinjin12 said:
So my sister has an Attt Galaxy note 2. I want to format her phone and install aokp or cyanogenmod on it cause they are smoother and faster roms. I searched on how to unlock and root the Galaxy note 2 but i've only found a bunch of guides showing how to root the phone, i haven't found one telling how to unlock the bootloader?
does anyone know how to unlock the GN2 bootloader, or is it already unlocked?
Click to expand...
Click to collapse
Surprise no one has answered. You can't, and you don't need to.
What firmware is the phone on now?
dicksteele said:
Surprise no one has answered. You can't, and you don't need to.
What firmware is the phone on now?
Click to expand...
Click to collapse
what do you mean you can't? Are samsung phones different somehow? I can unlock bootloader on my Nexus 4, my bro's Moto g, and my other Bro's Lg Optimus G, so why can't i unlock bootloader on Samsung Galaxy note 2?
i've never used a samsung phone before so i'm not sure if they differ somehow.
So i don't need to unlock bootloader to install aokp or cyangamod? i only need to root and install custom recovery? I think her phone is on android 4.1.2 or 4.2 i forgot which one.
jinjin12 said:
what do you mean you can't? Are samsung phones different somehow? I can unlock bootloader on my Nexus 4, my bro's Moto g, and my other Bro's Lg Optimus G, so why can't i unlock bootloader on Samsung Galaxy note 2?
i've never used a samsung phone before so i'm not sure if they differ somehow.
So i don't need to unlock bootloader to install aokp or cyangamod? i only need to root and install custom recovery? I think her phone is on android 4.1.2 or 4.2 i forgot which one.
Click to expand...
Click to collapse
Samsung does not consider your phone yours as these other manufacturers.
If she has not done the most recent Over the Air update to 4.3, it's probably on 4.1.2. The latest OTA installs Knox security. You dont want that.
There are some good choices in the http://forum.xda-developers.com/galaxy-note-2-att/development
You don't need to root either. If you do install, it will get overwritten since it's installed in the /system directory. ROMs replace the /system directory.
Just install custom recovery, follow ROMs install instructions. Verify with the thread OP if it requires the 4.3 leaked bootloader.
Located here.
http://forum.xda-developers.com/showthread.php?t=2502464
Oh and Samsung has help from AT&T
http://androidandme.com/2013/08/car...upport-unlocked-bootloaders-once-and-for-all/
dicksteele said:
Samsung does not consider your phone yours as these other manufacturers.
If she has not done the most recent Over the Air update to 4.3, it's probably on 4.1.2. The latest OTA installs Knox security. You dont want that.
There are some good choices in the http://forum.xda-developers.com/galaxy-note-2-att/development
You don't need to root either. If you do install, it will get overwritten since it's installed in the /system directory. ROMs replace the /system directory.
Just install custom recovery, follow ROMs install instructions. Verify with the thread OP if it requires the 4.3 leaked bootloader.
Located here.
http://forum.xda-developers.com/showthread.php?t=2502464
Oh and Samsung has help from AT&T
http://androidandme.com/2013/08/car...upport-unlocked-bootloaders-once-and-for-all/
Click to expand...
Click to collapse
I really appreciate the help . i posted on android central and this forum but no help until you posted so thanks. I guess samsung phones are different. I was also told that you only need to back up EFS files on samsungs phones only and NOT on Nexus 4, or Moto G right?
Also, you said you can just install custom recovery but don't you need to root phone to do that? and the most roms like aokp comes rooted by default right?
jinjin12 said:
I really appreciate the help . i posted on android central and this forum but no help until you posted so thanks. I guess samsung phones are different. I was also told that you only need to back up EFS files on samsungs phones only and NOT on Nexus 4, or Moto G right?
Click to expand...
Click to collapse
But of course.
EFS holds IMEI info, carrier info, a backup is definitely a good idea. You never know when an OH SH*T will pop up.
Here's some info. OH SH*T examples too.
http://www.droidviews.com/how-to-ba...imei-on-samsung-galaxy-devices-did-you-do-it/
Here's a couple to try.
https://play.google.com/store/apps/details?id=nl.boris.efsbackup&hl=en
http://forum.xda-developers.com/galaxy-s3/development/tool-samsung-tool-1-0-t2602325
And always back up your external sdcard to PC.
Top 5 OH SH*T's, accidentally formatted external sdcard. Helpful when upgrading to a bigger sdcard, also.
I just put in a 64MB samsung card. Fricking screams.
Good luck
dicksteele said:
But of course.
EFS holds IMEI info, carrier info, a backup is definitely a good idea. You never know when an OH SH*T will pop up.
Here's some info. OH SH*T examples too.
http://www.droidviews.com/how-to-ba...imei-on-samsung-galaxy-devices-did-you-do-it/
Here's a couple to try.
https://play.google.com/store/apps/details?id=nl.boris.efsbackup&hl=en
http://forum.xda-developers.com/galaxy-s3/development/tool-samsung-tool-1-0-t2602325
And always back up your external sdcard to PC.
Top 5 OH SH*T's, accidentally formatted external sdcard. Helpful when upgrading to a bigger sdcard, also.
I just put in a 64MB samsung card. Fricking screams.
Good luck
Click to expand...
Click to collapse
Also, you said you can just install custom recovery but don't you need to root phone to do that? and the most roms like aokp comes rooted by default right? Odin roots the phone? i saw a guide by technobuffalo and the dude used odin to root the phone before installing TWRP
jinjin12 said:
Also, you said you can just install custom recovery but don't you need to root phone to do that? and the most roms like aokp comes rooted by default right? Odin roots the phone? i saw a guide by technobuffalo and the dude used odin to root the phone before installing TWRP
Click to expand...
Click to collapse
Sorry, started replying back last night and got sidetracked.
Yes no need to root, pre-custom recovery. They are totally different. Root (superuser) is a file and app.
Custom recovery replaces the phones built-in Android recovery.Two "versions" TWRP and Clockworkmod. Both work well. Some ROM installs will suggest using a certain one.
ODIN will root the phone.
That file is here.
http://download.chainfire.eu/280/CF...t-t0lteatt-samsungsghi317.zip?retrieve_file=1
Most ROMs do have root incorporated.
dicksteele said:
Sorry, started replying back last night and got sidetracked.
Yes no need to root, pre-custom recovery. They are totally different. Root (superuser) is a file and app.
Custom recovery replaces the phones built-in Android recovery.Two "versions" TWRP and Clockworkmod. Both work well. Some ROM installs will suggest using a certain one.
ODIN will root the phone.
That file is here.
http://download.chainfire.eu/280/CF...t-t0lteatt-samsungsghi317.zip?retrieve_file=1
Most ROMs do have root incorporated.
Click to expand...
Click to collapse
odin can also flash roms and install custom recovery images right? i can just flash roms and recoveries using adb on the GN2 to flash roms also?
The technobufallo guide kind of made no sense since the guy used odin to root the phone, then used odin to flash custom recovery, then used it to flash cyanogenmod, which is pointless since like you say above, custom roms comes with root preloaded.
also my sister asked att to unlock her phone and now she's using tmobile with the phone. Would flashing any roms also lock the phone and prevent using tmobile sim?
jinjin12 said:
odin can also flash roms and install custom recovery images right? i can just flash roms and recoveries using adb on the GN2 to flash roms also?
The technobufallo guide kind of made no sense since the guy used odin to root the phone, then used odin to flash custom recovery, then used it to flash cyanogenmod, which is pointless since like you say above, custom roms comes with root preloaded.
also my sister asked att to unlock her phone and now she's using tmobile with the phone. Would flashing any roms also lock the phone and prevent using tmobile sim?
Click to expand...
Click to collapse
Yes. that does not make sense. So stop reading that guide.
You will need to flash a custom recovery. I'm detailing a TeamWin Recovery Project (TWRP) install
Here is an explanation of TWRP and how to use it.
http://www.addictivetips.com/android/what-is-twrp-how-to-install-use-it-on-android-devices-guide/
by Haroon Q Raja
Here are other ways to install a custom recovery on your Android phone
http://www.addictivetips.com/mobile/how-to-install-a-custom-recovery-to-an-android-phone-device/
Also by Haroon Q Raja
INSTALLING TWRP 2.6.3.1
Download
http://goo.im/devs/OpenRecovery/t0lteatt/openrecovery-twrp-2.6.3.1-t0lteatt.img.tar
- Run Odin3 v3.07.exe
Download Link http://www.mediafire.com/download/772dlmuaxfgm0x2/Odin307.zip
- Put your Note 2 in Download Mode
Entering download mode is very simple. First you will need to turn off your device. Once it’s off, you need to press this button combination: volume down, power button and home button. Keep them pressed until the download mode shows up. Once you’re there, you will be required to press volume up to enter the download mode or volume down to cancel and reboot the device.
Plug into a RELIABLE usb port and a RELIABLE usb cable (preferably the white Samsung cable) and wait for it to show up in Odin (COM5 or something like that)
- Click the PDA slot in Odin and locate the openrecovery-twrp-2.6.3.1-t0lteatt.img.tar that you downloaded.
The filename that goes into the PDA Slot is openrecovery-twrp-2.6.3.1-t0lteatt.img.tar
MAKE SURE IN THE OPTION AREA ONLY AUTO REBOOT AND F.RESET TIME ARE CHECKED!!!
- Click START and wait. It will complete and reboot.
Just install this ROM
http://forum.xda-developers.com/showthread.php?t=2568537
It's multicarrier so TMO is supported. It's rooted already.
Right above the Vipers Audio banner, on the left is a click here to show content. It lists all the features. I don;t think she's going to need more than this ROM right now.
dicksteele said:
Yes. that does not make sense. So stop reading that guide.
You will need to flash a custom recovery. I'm detailing a TeamWin Recovery Project (TWRP) install
Here is an explanation of TWRP and how to use it.
http://www.addictivetips.com/android/what-is-twrp-how-to-install-use-it-on-android-devices-guide/
by Haroon Q Raja
Here are other ways to install a custom recovery on your Android phone
http://www.addictivetips.com/mobile/how-to-install-a-custom-recovery-to-an-android-phone-device/
Also by Haroon Q Raja
INSTALLING TWRP 2.6.3.1
Download
http://goo.im/devs/OpenRecovery/t0lteatt/openrecovery-twrp-2.6.3.1-t0lteatt.img.tar
- Run Odin3 v3.07.exe
Download Link http://www.mediafire.com/download/772dlmuaxfgm0x2/Odin307.zip
- Put your Note 2 in Download Mode
Entering download mode is very simple. First you will need to turn off your device. Once it’s off, you need to press this button combination: volume down, power button and home button. Keep them pressed until the download mode shows up. Once you’re there, you will be required to press volume up to enter the download mode or volume down to cancel and reboot the device.
Plug into a RELIABLE usb port and a RELIABLE usb cable (preferably the white Samsung cable) and wait for it to show up in Odin (COM5 or something like that)
- Click the PDA slot in Odin and locate the openrecovery-twrp-2.6.3.1-t0lteatt.img.tar that you downloaded.
The filename that goes into the PDA Slot is openrecovery-twrp-2.6.3.1-t0lteatt.img.tar
MAKE SURE IN THE OPTION AREA ONLY AUTO REBOOT AND F.RESET TIME ARE CHECKED!!!
- Click START and wait. It will complete and reboot.
Just install this ROM
http://forum.xda-developers.com/showthread.php?t=2568537
It's multicarrier so TMO is supported. It's rooted already.
Right above the Vipers Audio banner, on the left is a click here to show content. It lists all the features. I don;t think she's going to need more than this ROM right now.
Click to expand...
Click to collapse
OK thanks alot man and thanks for taking the time to write all of that to help me :victory:
I was going to install aokp or cyanogenmod since she' been complaining about her phone being slow and stock touchwiz 4.1.2 is already reptty slow in itself. BUt she said she wanted to use s-pen features and especially multi window for her work, so those aokp and cyan roms were out of the the question. I still think if she wants speed, she needs aokp or cyanogenmod though, but i guess a lot of people those the touchwiz features
jinjin12 said:
OK thanks alot man and thanks for taking the time to write all of that to help me :victory:
I was going to install aokp or cyanogenmod since she' been complaining about her phone being slow and stock touchwiz 4.1.2 is already reptty slow in itself. BUt she said she wanted to use s-pen features and especially multi window for her work, so those aokp and cyan roms were out of the the question. I still think if she wants speed, she needs aokp or cyanogenmod though, but i guess a lot of people those the touchwiz features
Click to expand...
Click to collapse
No prob. That's why I pointed you to the Jedi Master X. It'll work on T Mobile, It has the speed. Check out the builder, ptmr3, stats. Fricking insane.
20000+ thanks, 8000+ posts.
Hi all, I hope this is the correct Forum for this thread. I did search for a clear thread on how to do this, but I couldn't find one with all the info I needed, so I apologize in advance if this has been asked 1000 times.
I'm relatively new to Flashing ROM's.
I would like to install a ROM I found here (ATT_UCUEMJB_I747S3Rx_3.0_AROMA_4-13-14.zip)
The instructions clearly state that I need the d2att_I747_MJ2-bootloader_MJB-modem.zip
I have read several threads that say this bootloader is bricking phones, and much more info that makes me want to be sure I have my ducks in line before proceeding.
Can someone please explain as detailed as possible the tools and steps I need to take to install this ROM onto my phone?
Galaxy S3 i747 ATT - SIM Unlocked, Safely Rooted and on Straight Talk currently. Before Rooting this phone received the OTA 4.3 Update as well, so it is up to date.
My weakest area so far is with the bootloader. I don't quite understand the process and would really appreciate all the info I can get.
Thanks all
If you took the 4.3 OTA AT&T ROM update, your phone has the 4.3 mjb bootloader.
To confirm which bootloader is on your phone, boot into download mode and let us know what it says on your screen.
audit13 said:
If you took the 4.3 OTA AT&T ROM update, your phone has the 4.3 mjb bootloader.
To confirm which bootloader is on your phone, boot into download mode and let us know what it says on your screen.
Click to expand...
Click to collapse
When I do Volume down + Home + Power it displays a screen that Cautions you about installing a Custom ROM, and then says "Press Volume down to exit or Volume up to Install custom software.
Boot into download mode by pressing the up key. That screen won't tell you if you have Knox installed or the 4.3 bootloader.
audit13 said:
Boot into download mode by pressing the up key. That screen won't tell you if you have Knox installed or the 4.3 bootloader.
Click to expand...
Click to collapse
I Pressed Volume up key and this was displayed in the upper left corner on that screen with the large Android Image. It also said "Downloading... Do not turn off Target!!"
ODIN MODE
Product Name: SGH-I747
Custom Binary Download - No
Current Binary - Samsung official
System Status - Custom
Qualcomm Secureboot - Enable
Warranty Bit - 0
Bootloader AP SWREV - 2
You have the 4.3 4.3 bootloader on your phone. Do not attempt to flash any lower stock ROMs via Odin as this may brick your phone. You can no longer downgrade your bootloader too.
In order for the phone to work with the mjb bootloader, you would also be running the latest modem which means you have the right items to install the SRX ROM.
You need to install a custom recovery before attempting to install a custom ROM.
Do you recommend a particular one?
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
I like the Validus ROM because it is has great battery life and nice blacked-out theme.
audit13 said:
I like the Validus ROM because it is has great battery life and nice blacked-out theme.
Click to expand...
Click to collapse
I looked into that one as well. Not sure about the blacked out theme though. Is it okay in all light sources, etc?
Now I looked around into Custom Recovery install and found Clockworkmod.
I even found an app from Playstore (on this site) that is supposed to find and flash the correct one for your device in just a few moments (Rashr)
but it doesn't recognize my I747 I guess. Plus, I don't want to do anything in case I brick this phone. Forgive me for being noobish here but I'm just concerned and like to measure three times, cut once.
Any chance you could clarify this procedure for me?
I have backed up my current ROM and apps, everything using Titanium Backup and believe I'm ready to do this today.
So, after finding a noob tutorial on installing Clockworkmod, I gave it a shot.
I renamed the file to recovery.img and placed it in the root of my sdcard.
Using the terminal emulator I used the command line in the instructions and it gives me an error that says the file or directory does not exsist
Any Ideas?
EDIT: Installed Rom manager and CWM is installed.
I downloaded the SRX ROM, placed it in the root of the SDcard. I believe I must do a full Wipe (Cache and Factory Reset) and then I can install Zip file, correct?
Yes, it's your first install if that Rom. Full wipe.
All good
Just to update the thread -
I installed the Rom and on first boot it didn't get past the Samsung Boot screen, even after waiting 10+ minutes.
2nd try was succesful and the ROM seems stable but I havent had much time to play around with it yet.
Thanks all for you help with my first ROM install :good:
I'm sorry i had the wrong links and because of this i had miss information. So i formally apologize by updating with the proper links.
this first method doesn't work with the Sph-L710T or the Sph-L710 on NJ2/NJ3
First method: You can root the stock 4.4.2 ND8/NDC:laugh:
1st. Make sure your on 4.4.2 ND8 or NDC
2nd. Download Towel Root
3rd. Place Towel Root in sdcard or internal storage
4th. With any file manager find and install Towel Root
5th. Open Towel Root and well root
6th. Go to play store and download https://play.google.com/store/apps/details?id=eu.chainfire.supersu&hl=en and also https://play.google.com/store/apps/details?id=stericson.busybox&hl=en let super user update the binary
7th. Flash any recovery you want {personally i went with PhilZ Touch (this was before PhilZ had a root Option)}
8th. Enjoy your rooted stock 4.4.2 ND8/NDC
Down below is one more way too root Stock ND8/NDC/NJ2/NJ3 or NF4/OA3 (L710T) and basically any other update
(link to the almighty ODIN)
Second Method: mostly recommended
1st. Odin flash TWRP
2nd. In Odin choose PDA, PA or AP then select the TWRP Tar you just downloaded
3rd. Make sure Auto reboot is unchecked (also at this time your s3 should be in download mode)
4th. Hit start and let Odin let it finish!!
5th. Hold power button to turn off your S3, after it turns off about 10 seconds later it will turn back on to the battery charging screen so before that quickly hold Volume+ and Home, to boot into recovery
6th. now your in TWRP
7th. so to root your stock rom with TWRP flash the following file SuperSU.zip by Chain fire (pro tip. Install any other custom recovery the same way I did for TWRP above if it is in .tar format)
and here is Philz recovery for the D2Lte 6.48.4 ( which you must flash in TWRP)
and here is TWRP that was made specifically for the D2Rephersher/triband/L710T TWRP (which you must flash in a recovery)
Third method Most recent.
Hidyman said:
This is in reference to Samsung Galaxy S3 for Boost Mobile SPH-L710.
Just want to let anyone out there that updated their Boost S3 to L710VPUC0J1 know that you can still root and/or ROM your phone.
Use the instructions to (use Odin to) update the recovery to TWRP first (in the second set of instructions). I had trouble trying to go right to PhilZ Recovery (which I believe is based off of ClockWorkMod). I Had to do the TWRP (twrp-2.8.7.0-d2spr.img.tar) first.
It was the only way to get it to actually accept the recovery, not sure why, maybe because the latest Samsung firmware fixed an exploit or two.
This is an older phone, but it is still a viable one.
I hope this helps someone out there.
It took me a while to figure this quandary out.
As always this WILL flag KNOX, but I'm sure this won't be an issue at this date and time (8/2016).
Click to expand...
Click to collapse
work on ND8 rom? sprint phone?
Tekone said:
work on ND8 rom? sprint phone?
Click to expand...
Click to collapse
i want to say yes but towel root does come with a warning that it might brick your device.....but i want to say yes since most things that can be done to the ND8 can be done to the NDC and also in reverse order.....so try it and report back it will be good to know if it works on both bootloaders
Sprint S3 Android 4.4.2 ND8-It works!
I just used this method to root my Sprint S3 running Android 4.4.2 and ND8, since my USB port is on the fritz, and it worked successfully. I have root, and was able to do a full apps backup with Titanium Backup, and gained root access in ES File Explorer. Next, download and install a custom backup. Thanks, great job, and could not have been made easier to do!
oops
Rooted the phone in one click. Unfortunately, I lost all data (no 3G or 4G connection). Did I goof? I'm looking in the stickies and can't seem to find an answer. I'd appreciate any help I can get.
henhun said:
Rooted the phone in one click. Unfortunately, I lost all data (no 3G or 4G connection). Did I goof? I'm looking in the stickies and can't seem to find an answer. I'd appreciate any help I can get.
Click to expand...
Click to collapse
ND8 or NDC? have you tried updating your profile/PRL?
6th_Hokage said:
ND8 or NDC? have you tried updating your profile/PRL?
Click to expand...
Click to collapse
Ya know. People keep talking about ND8 and ND___. I have no idea what that means. I know I should be embarrassed.
UPDATE: FIGURED IT OUT, BASEBAND VERSION. GOTCHA. IT IS NDC.
I was JUST coming back to update my post. I DID update the PRL and restarted my phone. That seems to have done the trick. Thank GOD I got my data connection back!! It worked. Even though I found the info somewhere else, thank you so much for the quick reply. PRL update fixes the problem. You're awesome.
I used it before i had a custom recovery. And on reboot i wouldnt have root. After i ran it root checker told me i was rooted then reboot killed. I installed philz and all was ok
Sent from my SPH-L710 using XDA Free mobile app
jbnorton0524 said:
I used it before i had a custom recovery. And on reboot i wouldnt have root. After i ran it root checker told me i was rooted then reboot killed. I installed philz and all was ok
Sent from my SPH-L710 using XDA Free mobile app
Click to expand...
Click to collapse
many users of basically the same phone report different things with every root method out there. If it worked for you that's great tell other users what you did for it to work and if it didn't work, then ask for help and you will get help; some people don't have success with any method while others do with all of the methods.....my phone falls under every method.....
Successful Towelroot on VM Galaxy S3 4.4.2.NDC
6th_Hokage said:
you can root the stock 4.4.2
first step make sure your on 4.4.2
second step download Towel Root
third step place Towel Root in sdcard or internal storage
fourth step with any file manager find and install Towel Root
fifth step root
sixth step go to play store and download Superuser (Chainfire) and also Busy Box (Stericson) let super user update the binary
seventh step flash any recovery you want personally i went with Philliz Touch
eighth step if you want flash a custom rom now if not enjoy your rooted stock 4.4.2
Click to expand...
Click to collapse
Straight forward, fast and easy. I did notice the following:
1) Updating binary reported it did not successfully install. I've seen this before on other devices, but everything worked well. Ext SD and Camera all OK. Everything works fine so far - Titanium, Nandroid, Root Browser, etc.
2) At one point, I was directed to install Busy Box. Having done this on other devices, I said "Yes" and installed it.
3) I see that my device now shows Device Status as Custom ( was Normal before, if I remember correctly). Is this due to Busy Box?
4) Is Device Status the only way to know the KNOX Status? I see no yellow triangle as I did on my Galaxy Reverb.
5) I got a Google warning to uninstall Towelroot since it is usafe and a security exploit. I understand that.
I would like to verify the KNOX status and if tripped in the Towelroot process, to let potential users know of that possibility.
Thank You! And thanks to everyone who has continued to work on keeping root free!
Dave
dave260 said:
Straight forward, fast and easy. I did notice the following:
1) Updating binary reported it did not successfully install. I've seen this before on other devices, but everything worked well. Ext SD and Camera all OK. Everything works fine so far - Titanium, Nandroid, Root Browser, etc.
2) At one point, I was directed to install Busy Box. Having done this on other devices, I said "Yes" and installed it.
3) I see that my device now shows Device Status as Custom ( was Normal before, if I remember correctly). Is this due to Busy Box?
4) Is Device Status the only way to know the KNOX Status? I see no yellow triangle as I did on my Galaxy Reverb.
5) I got a Google warning to uninstall Towelroot since it is unsafe and a security exploit. I understand that.
I would like to verify the KNOX status and if tripped in the Towelroot process, to let potential users know of that possibility.
Thank You! And thanks to everyone who has continued to work on keeping root free!
Dave
Click to expand...
Click to collapse
Knox only notifies Samsung that your device isn't stock anymore not necessarily rooted like with a custom recovery and then flashed mods and what not but if you Odin the stock rom it resets the counters so Samsung will never know....and that i have noticed TowelRoot doesn't trip that counter.....only the recoveries and when you update the binary (<---completely forgot to fix that) you must hit the option normal not TWRP/CWM
churninern said:
I just used this method to root my Sprint S3 running Android 4.4.2 and ND8, since my USB port is on the fritz, and it worked successfully. I have root, and was able to do a full apps backup with Titanium Backup, and gained root access in ES File Explorer. Next, download and install a custom backup. Thanks, great job, and could not have been made easier to do!
Click to expand...
Click to collapse
That's great news because same boat here. It worked on 4.3 as well.
I had the phone hacked before and something must not be fully stock so the Ota fails.
I downloaded a package and mobile odin should flash it properly and then I can root it with this again and install a nice modified TouchWiz rom.
Darkangels6sic6 said:
That's great news because same boat here. It worked on 4.3 as well.
I had the phone hacked before and something must not be fully stock so the Ota fails.
I downloaded a package and mobile odin should flash it properly and then I can root it with this again and install a nice modified TouchWiz rom.
Click to expand...
Click to collapse
just a quick add on Mobile Odin and stock ND8/NDC don't mix at all
Knox Counter and "Device Status"
6th_Hokage said:
Knox only notifies Samsung that your device isn't stock anymore not necessarily rooted like with a custom recovery and then flashed mods and what not but if you Odin the stock rom it resets the counters so Samsung will never know....and that i have noticed TowelRoot doesn't trip that counter.....only the recoveries and when you update the recovery you must hit the option normal not TWRP/CWM
Click to expand...
Click to collapse
Thanks for your response. I may be over thinking these indicators. All I did was Towelroot, successfully. On the phone, the "About Device, Status" now says CUSTOM (was "Official"). The Knox counter according to app "Phone Info" shows Knox Counter at 0x0. As you said, since the counter is not tripped, should be no problem on warranty. So then Device Status CUSTOM is not a problem? I'm not really worried about warranty at this point, but I think I'll hold off further mods for another 6 moths.
Thanks again for your help!
6th_Hokage said:
just a quick add on Mobile Odin and stock ND8/NDC don't mix at all
Click to expand...
Click to collapse
Thanks. I tried the md8 and mk3 "mk3 is what it's on". Both just restart and get stuck on splash screen :/.
I have to go to download mode and and restart it that way to boot system back up.
Do you have any other suggestion. I'm not sure what part of the system is altered. It seems like a stock recovery and it's stock firmware "now rooted". Maybe the kernel.
I can't use USB at all.
I'm guessing maybe I should install twrp. Then install a stock zip or try out a 4.3 rom that way. I would like to get to md8 one way or another. Most md8 Roms want you to odin or flash an md8 base.
Darkangels6sic6 said:
Thanks. I tried the ND8 and MK3 "MK3 is what it's on". Both just restart and get stuck on splash screen :/.
I have to go to download mode and and restart it that way to boot system back up.
Do you have any other suggestion. I'm not sure what part of the system is altered. It seems like a stock recovery and it's stock firmware "now rooted". Maybe the kernel.
I can't use USB at all
I'm guessing maybe I should install TWRP. Then install a stock zip or try out a 4.3 rom that way. I would like to get to md8 one way or another. Most ND8 Roms want you to Odin or flash an md8 base.
Click to expand...
Click to collapse
cause they need the ND8 base to work as intended...my suggestion would be to get the usb port on your phone fixed but i don't know how expensive that will be
6th_Hokage said:
just a quick add on Mobile Odin and stock ND8/NDC don't mix at all
Click to expand...
Click to collapse
6th_Hokage said:
cause they need the ND8 base to work as intended...my suggestion would be to get the usb port on your phone fixed but i don't know how expensive that will be
Click to expand...
Click to collapse
I was afraid you would say that.
Holy crap. May I say, I am quite impressed. I never planned on rooting my S3 (I like it that much!) but this just looked so damn easy to do and it was!
For the curious! I have a Virgin Mobile S3, and I'm on Kitkat 4.4.2, baseband NDC. Verified root with Root Checker Basic. No problems with mobile data.
Many thank yous, 6th_Hokage!
strangelady said:
Holy crap. May I say, I am quite impressed. I never planned on rooting my S3 (I like it that much!) but this just looked so damn easy to do and it was!
For the curious! I have a Virgin Mobile S3, and I'm on Kitkat 4.4.2, baseband NDC. Verified root with Root Checker Basic. No problems with mobile data.
Many thank yous, 6th_Hokage!
Click to expand...
Click to collapse
your welcome strangelady and if you want check out the links in my signature area for other cool stuff
added two more t=root methods
Hi all, new to all of this. Please keep this in mind as you read this thread.
Well first of all I have been reading about Cyanogenmod and how it helps saves battery. I also wanted to use cputuner to overclock my phone a little. I have in the past rooted this phone and installed cputuner not knowing that it could damage your phone if you didn't have a custom kernel that supported overclocking. After I found that out I uninstalled it and unrooted in fear of damage to my phone. Anyways I have a few questions and was looking knowledge, resources, and help about a few things.
Questions:
Is installing a custom rom and things needed to install a custom rom possible with a PC?
Can I safely reroot my device since I unrooted through #SU?
What do I need to do besides reroot my device in order to install a custom rom? (Cyanogenmod)
Thanks in advance!
Other INFO:
My device is a Samsung Galaxy S3 I-747
Firmware 4.4.2 KitKat
Device was rooted before using towelroot but I unrooted using #SU.
.
Ok. To install cm with no computer use, I'd say the easiest way would be to get root again with towelroot. Then install flashify from the play store. use flashify to install a custom recovery. I prefer TWRP.
Next download cm rom and Gapps. Follow the installation instructions for the rom. Generally that's boot into recovery, wipe dalvik, cache, system, and data, flash rom, flash Gapps, then reboot. You can do this from the internal SD, it won't erase that when you wipe. However, an external SD can be really handy for getting out of a jam.
If you haven't done it, a little research on the forums here about backing up your efs might be in order before flashing roms. Hope you never need it, but it could make life easier someday.
Read, read, read the forum here. This was just a real brief overview. If you don't quite understand any part, it should at least help you with what to search to learn what you need to know.
Sent from my LG-V410 using XDA Free mobile app
jason2678 said:
Ok. To install cm with no computer use, I'd say the easiest way would be to get root again with towelroot. Then install flashify from the play store. use flashify to install a custom recovery. I prefer TWRP.
Next download cm rom and Gapps. Follow the installation instructions for the rom. Generally that's boot into recovery, wipe dalvik, cache, system, and data, flash rom, flash Gapps, then reboot. You can do this from the internal SD, it won't erase that when you wipe. However, an external SD can be really handy for getting out of a jam.
If you haven't done it, a little research on the forums here about backing up your efs might be in order before flashing roms. Hope you never need it, but it could make life easier someday.
Read, read, read the forum here. This was just a real brief overview. If you don't quite understand any part, it should at least help you with what to search to learn what you need to know.
Sent from my LG-V410 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks friend will look into it a little more. So is there a major risk of getting bricked or are chances slim? Also do you have any links to the Cyanogenmod version I'm looking for? I would like it to be 4.4.2, not 5.X.X. And I also need the appropriate gapps file. If you don't know I still thank you for the info friend!
KentuckyGuy447 said:
Thanks friend will look into it a little more. So is there a major risk of getting bricked or are chances slim? Also do you have any links to the Cyanogenmod version I'm looking for? I would like it to be 4.4.2, not 5.X.X. And I also need the appropriate gapps file. If you don't know I still thank you for the info friend!
Click to expand...
Click to collapse
Chances of bricking should be slim as long as you follow the instructions closely.
CyanogenMod 11 is based on Android 4.4.X, Kitkat. Nightlies can be found here or here.
Snapshot releases, sometimes called monthlies, can be found here.
There are options regarding Google Apps( GAPPS ) the choices from CM are here.
Some prefer the GAPPS packages provided by Paranoid Android, look here.
dawgdoc said:
Chances of bricking should be slim as long as you follow the instructions closely.
CyanogenMod 11 is based on Android 4.4.X, Kitkat. Nightlies can be found here or here.
Snapshot releases, sometimes called monthlies, can be found here.
There are options regarding Google Apps( GAPPS ) the choices from CM are here.
Some prefer the GAPPS packages provided by Paranoid Android, look here.
Click to expand...
Click to collapse
Thanks so much! Have been researching like crazy and odds seem pretty good. Problem is I've hit a ditch headfirst. I can't reboot using towering because I updated my kernel sometime through the period when my phone was unrooted (idk when or how this was done.) The date is apast june the 3rd and i read it won't work apast that date. Is there a workaround for this? I have no PC so I would like a non-PC method if possible. I just wanted to say I have tried all the modstrings for toweroot and still nothing.
KentuckyGuy447 said:
Thanks so much! Have been researching like crazy and odds seem pretty good. Problem is I've hit a ditch headfirst. I can't reboot using towering because I updated my kernel sometime through the period when my phone was unrooted (idk when or how this was done.) The date is apast june the 3rd and i read it won't work apast that date. Is there a workaround for this? I have no PC so I would like a non-PC method if possible. I just wanted to say I have tried all the modstrings for toweroot and still nothing.
Click to expand...
Click to collapse
The June 3rd date probably only counts if you took all of the OTA updates, okay rechecked your OP and I see that you are on NE4. I recall that either the NE4 or the NJ1 update patched the kernel to block TowelRoot. I take it when you say Firmware 4.4.2 KitKat you mean baseband, modem, and Samsung stock rom.
With SuperSu you can re-root using it, assuming you unrooted but did not remove the app. I don't know if the same applies to th SU app that comes with CWM. You could try. If you did go back to stock rom and properly formated you may no longer have su on your phone.
Yes, if you have a custom recovery on your phone you should be able to re-root without a PC. Search for the zip version of SuperSu, put it on an external sdcard, and flash it through the recovery. Without a custom recovery I'm not sure of other options not requiring root that do not involve a PC (Windows or Linux) or a Mac. Apps like Flashify require root, so will not work for you at the moment.
dawgdoc said:
The June 3rd date probably only counts if you took all of the OTA updates, okay rechecked your OP and I see that you are on NE4. I recall that either the NE4 or the NJ1 update patched the kernel to block TowelRoot. I take it when you say Firmware 4.4.2 KitKat you mean baseband, modem, and Samsung stock rom.
With SuperSu you can re-root using it, assuming you unrooted but did not remove the app. I don't know if the same applies to th SU app that comes with CWM. You could try. If you did go back to stock rom and properly formated you may no longer have su on your phone.
Yes, if you have a custom recovery on your phone you should be able to re-root without a PC. Search for the zip version of SuperSu, put it on an external sdcard, and flash it through the recovery. Without a custom recovery I'm not sure of other options not requiring root that do not involve a PC (Windows or Linux) or a Mac. Apps like Flashify require root, so will not work for you at the moment.
Click to expand...
Click to collapse
Thanks for the info, sadly I did uninstall #SU. Here is a ss of my modem info and such. I think it pretty much confirms I have the NJ1 version but I need you to confirm that.
KentuckyGuy447 said:
Thanks for the info, sadly I did uninstall #SU. Here is a ss of my modem info and such. I think it pretty much confirms I have the NJ1 version but I need you to confirm that.
Click to expand...
Click to collapse
I'm stuck.
You can install a custom recovery without having root, if you have a PC. You would use either Odin, Heimdall, or maybe adb.
You can install a custom recovery without a PC if you have root. You would use an app Like Flashify, Rom Manager, or Goo Manager (if it still exists).
You can flash a rom without a PC if you have a custom recovery, root is not needed.
Some roms, usually stock, can be flashed without a custom recovery if you have a PC.
I don't know the solution until you have access to a PC. I could see it being possible using a live USB with persistence of a Linux distribution, but you still have need for a PC. It's been a while since I created a live USB. The method I used required a small installation on the PC. so I don't see this as an immediate solution for you.
Oh sorry. I don't think towelroot works once you're on nj1, unless it has been updated.
If you get access to a PC, rooting is still fairly easy. You can use download mode and odin or heimdall to flash a custom recovery (be sure to uncheck reboot if using odin, or be really ready to pull battery). Don't let your phone reboot normally, you'll have to pull battery once odin is done.
Reboot to custom recovery, then flash supersu and you'll be rooted again, and set up to do whatever you want with your phone.
Sent from my LG-V410 using XDA Free mobile app
Thanks all for your help. I have decided I'm gonna give C-F Root a try as it seems very easy, then use Flashify to get CWM. Correct me if I'm wrong but there's no boot loader for my model type right? Couldn't seem to find anything on the subject except the Verizon variant. I'm gonna still need help deciding which gapps to flash as I'm gonna flash the latest Cyanogenmod monthly build. Is there anything else to be aware of when using a new Rom?
KentuckyGuy447 said:
Thanks all for your help. I have decided I'm gonna give C-F Root a try as it seems very easy, then use Flashify to get CWM. Correct me if I'm wrong but there's no boot loader for my model type right? Couldn't seem to find anything on the subject except the Verizon variant. I'm gonna still need help deciding which gapps to flash as I'm gonna flash the latest Cyanogenmod monthly build. Is there anything else to be aware of when using a new Rom?
Click to expand...
Click to collapse
excuse for butting in .... but if you dont know your bootloader/modem info. here is an app called 'samsung info' that should tell you.
your question "...... but theres no bootloader for my phone model right?" kinda worried me. its important to know because they should match AND trying to downgrade can brick your device. on the plus side ; i've never seen a custom ROM include bootloader/modem in it.
again , just a thought and not trying to butt in.:good:
https://www.dropbox.com/s/4ka74x02tg1rrn1/org.vndnguyen.phoneinfo-1.apk?dl=0
"all i can really do , is stay out of my own way and let the will of heaven be done"
As mrrocketdog stated, the Samsung Info app will tell you your bootloader and modem. If what you previously stated is correct, they should both be NJ1. You can get the same info by issuing these commands in a terminal emulator on the phone:
Code:
getprop ro.bootloader
and
Code:
getprop | grep version.baseband
Appreciate the butting in! You may have just saved me from bricking my phone lol. Maybe I need to do a lot more research because that just lost me. So how do I tell that my phone is equipped with a boot loader? And if it is how do I disable it? I read that in order to flash a new Rom the boot loader must be disabled. (Correct me if I'm wrong) I'm no where near the point of flashing a new Rom (Cyanogenmod) but this is a great furniture reference to me.
KentuckyGuy447 said:
Appreciate the butting in! You may have just saved me from bricking my phone lol. Maybe I need to do a lot more research because that just lost me. So how do I tell that my phone is equipped with a boot loader? And if it is how do I disable it? I read that in order to flash a new Rom the boot loader must be disabled. (Correct me if I'm wrong) I'm no where near the point of flashing a new Rom (Cyanogenmod) but this is a great furniture reference to me.
Click to expand...
Click to collapse
every phone has a bootloader , two if i'm not mistaken. the one you're concerned with comes already unlocked on the good 'ol S3. (i bricked my first s3 trying to 'unlock' the bootloader). just find out bootloader/modem version (see posts above) to make sure they match (to avoid issues later) and just dont ever try to downgrade.
"all i can really do , is stay out of my own way and let the will of heaven be done"
mrrocketdog said:
every phone has a bootloader , two if i'm not mistaken. the one you're concerned with comes already unlocked on the good 'ol S3. (i bricked my first s3 trying to 'unlock' the bootloader). just find out bootloader/modem version (see posts above) to make sure they match (to avoid issues later) and just dont ever try to downgrade.
"all i can really do , is stay out of my own way and let the will of heaven be done"
Click to expand...
Click to collapse
You have lifted a burden off my shoulders friend! Ever since I wanted to flash a custom Rom I've been worried if my phones bootloader was locked! I can now be at ease now that I know its unlocked. Will check upon that info about bootloader/modem.
Here is the info mrrocketdog
Is there a reason you can't use a PC to install a ROM?
I'm asking because I also do not know of a way to install a ROM without having root.
If you are able to root, you could try using the CM installer again.
audit13;5898140 said:
Thanks friend no worries, mrrocketdog helped me figure it out, than to all who helped!
Click to expand...
Click to collapse
KentuckyGuy447 said:
Here is the info mrrocketdog
Click to expand...
Click to collapse
Those are the latest versions of the bootloader and modem. You will be good for CM 12 or CM 11, and other custom ROMs based on CM. Older versions will work with them, but you probably need to edit the updater-script. (The older versions are not likely to include the NJ1 versions in the checks as they were not out when the ROMs were last updated.) NJ1 will also work with any of the ROMs based on the KitKat TouchWiz releases by Samsung.
As soon as you can find a PC to borrow you should be in business. Any chance of using one at a public library?
Appreciate all the help you gave me too friend, providing the links to cm and gapps, gonna borrow my friends laptop Sunday and try to root flash C-F Root through Odin. Thats the part that scares me but I should be good as people has confirmed it works for NJ1. Wish me luck friend. Would you recommend installing CM12? I personally like kit Kat and I know CM11 is based on that but is CM12 better? I guess its based on Lollipop
HOW TO ROOT NK2 / Fix boot loop after NE2 to NK2 update
I've gotten a lot of question about rooting the Sprint Samsung Galaxy Note II from people on NK2. As we know, the NK2 update has some anti-root measures in place that have caused confusion. Some people are just rooting for the first time after receiving the NK2 update and some were already rooted on NE2 and lost root or soft bricked after taking the NK2 update. First, I'll show how to root NK2 if you're already running stock NK2. The instructions for those who soft bricked after taking the NK2 update from rooted NE2 will be listed second.
Warning #1: Rooting your device will void your warranty and your insurance.
Warning #2: I'm not responsible for your device. If you want to root it, you understand that there are risks involved. If you have questions then you should ask before proceeding or don't do it.
Instructions for rooting stock NK2.
01. Review the warnings above.
02. Charge your device to at least 60%
03. Have your device, a good micro USB cable, and your Windows PC ready.
04. Create a folder on your desktop and and name it "L900 ROOT". Download the following files into it:
file Sprint Samsung Galaxy Note II drivers for Windows.
file Odin 1.85. You will need to unzip this file using 7zip or UnRAR.
file TWRP recovery
file SuperSU (donation is recommended)
05. Install the Note II drivers on your PC.
06. Move the SuperSU file onto the root of your external SD card.
07. Power off your device.
08. Put your device into download mode by pressing and holding volume down+home+power. When the warning screen appears, press volume up. A screen saying, "Downloading...Do not turn off target" will appear. This is download mode.
09. Right click on Odin and run as administrator.
10. Connect your device to your PC. The ID:COM box will highlight. If the ID:COM box doesn't highlight, then see the troubleshooting below.
11. Uncheck Auto Reboot and F Reset Time. Repartition should also be unchecked.
12. Click the PDA button. This will prompt you to select a file.
13. Select the openrecovery-twrp-x.x.x.x-toltesrp file from your L900 ROOT folder.
14. Click Start.
15. When Odin completes flashing TWRP it will say, "PASS". This may take several minutes. If it takes more than ten minutes see troubleshooting below.
16. Disconnect your device from your PC. Your device will still be on the screen saying, "Downloading...Do not turn off target". You will ignore this warning and go to step 17.
17. Remove and then replace the battery in your device.
18. Boot into TWRP recovery by pressing and holding volume up+home+power until "Teamwin" appears.
19. Tap "Install".
20. Select the UPDATE-SuperSU-vX.XX.zip file.
21. Swipe to confirm flash. This will flash SuperSU to your device.
22. Reboot System. Your device will reboot.
23. You're now rooted running NK2. Sign into Google and your Samsung account. You can install Root Checker and run it to confirm root. Enjoy.
Instructions for soft bricked after taking NK2 from rooted NE2.
WARNING: If you're stuck in a boot loop or stuck at the Samsung logo then remove and replace your battery. Make sure your device is at least 60% charged before following these instructions.
01. Create a folder on your desktop and and name it "L900 ROOT". Download the following files into it:
file Sprint Samsung Galaxy Note II drivers for Windows.
file Odin 1.85. You will need to unzip this file using 7zip or UnRAR.
file TWRP recovery
file SuperSU (donation is recommended)
file Stock NE2 firmware. You will need to unzip this file using 7zip or UnRAR.
02. Install the Note II drivers on your PC.
03. Put your device into download mode by pressing and holding volume down+home+power. When the warning screen appears, press volume up. A screen saying, "Downloading...Do not turn off target" will appear. This is download mode.
04. Right click on Odin and run as administrator.
05. Connect your device to your PC. The ID:COM box will highlight. If the ID:COM box doesn't highlight, then see the troubleshooting below.
06. Uncheck Repartition. Auto Reboot and F Reset Time should be checked.
07. Click the PDA button. This will prompt you to select a file.
08. Select the L900VPUCNE2_L900SPTCNE2_SPR file.
09. Click Start. Odin will flash NE2. When it's complete it will say, "PASS" and reboot automatically. This will take a long time. If it takes more than 30 minutes see the troubleshooting below.
10. Your device is now stock NE2. Now you can either root it as you did before (in which case you're done here) or you can take the NK2 update (in which case go to step 11)
11. You will get an update notification for NK2 shortly. Take the update when you get the notice.
12. You will now go to the steps for rooting stock NK2 above, starting with step 06.
If you rooted NE2 and want to stop the Sprint update notification from nagging you to take the NK2 update [TAP HERE].
Troubleshooting
These are common troubleshooting steps for issues with rooting, installing firmware, and custom recovery.
1. Proceedure. This is the #1 cause of failure. Make sure you follow the instructions precisely. If you aren't sure about something then ask a question.
2. Cable. A poor quality cable can prevent Odin from recognizing your device. Use a different cable.
3. Drivers. Try reinstalling drivers.
4. Bad download. Try redownloading files, drivers.
5. USB port. Some computers, especially older ones, function better on certain USB ports. Try another USB port.
6. Insufficient charge. Charge your device, it's in the instructions.
7. Restart your PC. Sometimes all it takes to get things running smoothly is a fresh start.
I know how frustrating it can be trying to find the information you need to get your device running the way you want. I really hope this helps someone. If you need help please post a question or message me directly. We are a community and we're here to help eachother. If this has helped you, then please remember to post that it worked for you. Donations are appreciated. If it didn't work for you then ask for help. Please don't just post that it doesn't work. This process works, so it's more likely that you just a little assistance.
Cheers and happy rooting!
Thank you. rooting worked perfectly.
romagnus said:
Thank you. rooting worked perfectly.
Click to expand...
Click to collapse
Thanks for reporting your success. I'm happy my guide helped you!
Thanks chzeckmate. This didn't completely work for me because I ended up doing something stupid and throwing myself into a bootloop. I had to reflash NE2 and then took the NK2 OTA. Once that was done I used Chainfire's Auto Root through Odin. Now rooted on NK2 with stock recovery. I may go with a custom recovery later but prefer to leave things as is for now.
Your post got me off the fence about trying to get the NK2 update (just to get rid of the nags) and getting it rooted.
-andone- said:
Thanks chzeckmate. This didn't completely work for me because I ended up doing something stupid and throwing myself into a bootloop. I had to reflash NE2 and then took the NK2 OTA. Once that was done I used Chainfire's Auto Root through Odin. Now rooted on NK2 with stock recovery. I may go with a custom recovery later but prefer to leave things as is for now.
Your post got me off the fence about trying to get the NK2 update (just to get rid of the nags) and getting it rooted.
Click to expand...
Click to collapse
The second set of instructions deals with fixing the boot loop. You'll notice it instructs you to flash NE2 and then take NK2 OTA and then follow the first set of instructions to root and flash custom recovery. That said, I'm glad you got yourself sorted out. If you want custom recovery now, you can follow the first set of instructions. The fact that you're already rooted doesn't matter, it's totally fine to go ahead. I would highly recommend getting custom recovery so that you can make a nandroid backup to restore from in the event you have any issues in the future. Custom recovery is also necessary for flashing ROMs and ZIPs. I'm of the opinion that custom recovery is essential. Anyway, thanks for reporting. If you have any questions or need any help with anything let me know.
By the way, if you just wanted to get rid of the update nag there's a link at the bottom of this guide for how to do that. See it →HERE←
Thanks again and happy flashing!
chzeckmate said:
The second set of instructions deals with fixing the boot loop. You'll notice it instructs you to flash NE2 and then take NK2 OTA and then follow the first set of instructions to root and flash custom recovery. That said, I'm glad you got yourself sorted out. If you want custom recovery now, you can follow the first set of instructions. The fact that you're already rooted doesn't matter, it's totally fine to go ahead. I would highly recommend getting custom recovery so that you can make a nandroid backup to restore from in the event you have any issues in the future. Custom recovery is also necessary for flashing ROMs and ZIPs. I'm of the opinion that custom recovery is essential. Anyway, thanks for reporting. If you have any questions or need any help with anything let me know.
By the way, if you just wanted to get rid of the update nag there's a link at the bottom of this guide for how to do that. See it →HERE←
Thanks again and happy flashing!
Click to expand...
Click to collapse
Thanks for the follow up. I started out on rooted NE2 and CWM recovery. I was hoping against hope to try to be all sly and avoid needing to reflash NE2. So I flashed the stock recovery back on my device and then used the "unroot" option in SuperSU. This is where I was hoping I could just take the NK2 OTA and then follow your instructions to install TWRP and root. I rebooted the device and there was no more option to install NK2 in the Update Samsung Software menu option. At this point I'm thinking no problem, I'll just go into stock recovery and flash the NK2 OTA I had moved out of the cache folder to prevent an accidental install. When I flashed that, that's when I got stuck in my bootloop. I'm sure there was a no-no in there somewhere. Again, I think no problem, I'll just go flash CWM back on there and grab my latest nandroid. That didn't exactly work since I realized my software and baseband were now different versions. I reflashed NE2 and tried restoring said nandroid to give up for the night. All I got was a neverending parade of force closes from gapps. I finally conceded and just flashed NE2, took NK2 OTA and then CF Auto Rooted. Super long route to what ended up being a very simple solution.
Also, what I did to get rid of the NK2 nag was to open the notification drawer and long press on the notification. It brought up the "App Info" menu option. Clicked that and went into the app info and unchecked the "Show notifications" box. I know it turned off any notifications handled by that system app, but it worked for me so I just went with it.
I wish I had a better grasp on the Android platform than I do. A lot of what I've learned has come from weeding through many, many posts here on XDA and a lot of trial and error on my part. Honestly, I'm both glad and surprised that I haven't bricked my phone yet.
thanks.
thanks. it worked. next i'll see how to get a good backup then maybe a new ROM
Downgrade to NE2
I am sorry for out of topic, do we can downgrade from NK2 to NE2 directly from Odin?
komputertua said:
I am sorry for out of topic, do we can downgrade from NK2 to NE2 directly from Odin?
Click to expand...
Click to collapse
Odin will not let you downgrade.
Sent from my GT-N7105 using XDA Premium 4 mobile app
Is there any other options to downgrade?
I am on stock NK2 and have some trouble with it.
Need to go to fresh MK4 or maybe Ne2.
I've been looking for NK2 tarballs but can't find it.
Just flash a custom recovery then custom mk4 rom.
Sent from my GT-N7105 using XDA Premium 4 mobile app
So there is no way to go to stock NE2?
Sorry for being fussy, could you tell me please what differences between NE2 & NK2? Is NK2 a major update including new radio and bootloader?
Sent from my HM NOTE 1W using Tapatalk
komputertua said:
So there is no way to go to stock NE2?
Sorry for being fussy, could you tell me please what differences between NE2 & NK2? Is NK2 a major update including new radio and bootloader?
Sent from my HM NOTE 1W using Tapatalk
Click to expand...
Click to collapse
NK2 is only a minor security update. Bootloader, modem, and kernel did not change. So you might be able to odin ne2 over nk2 but trying to odin any other version (unless we get something newer aka lollipop) will fail.
Sent from my GT-N7105 using XDA Premium 4 mobile app
Thankyou jlmancuso, it works.
I've downgraded from NK2 to NE2, directly from Odin.
Thankyou very much
Sent from my HM NOTE 1W using Tapatalk
lost root, can't get it back
I had root while on ne2. took nk2. lost root. 27 May decided to re-root. worked great. backed up with titanium. downloaded twrp manager. it said I needed root. retried titanium. it didn't have root either. re-did these instructions again and again. all "seems" right with the world. I got "passed" in green. I got "team win" ! installed super su 1.94. looked ok. but no root. what is there that I don't know? any ideas! I did have some trouble with my sd card. Sandisk 64 GIG did not want to read. replaced it.
note II Sprint L900
Seaogre said:
I had root while on ne2. took nk2. lost root. 27 May decided to re-root. worked great. backed up with titanium. downloaded twrp manager. it said I needed root. retried titanium. it didn't have root either. re-did these instructions again and again. all "seems" right with the world. I got "passed" in green. I got "team win" ! installed super su 1.94. looked ok. but no root. what is there that I don't know? any ideas! I did have some trouble with my sd card. Sandisk 64 GIG did not want to read. replaced it.
note II Sprint L900
Click to expand...
Click to collapse
Would help if you stated exactly which rom you were using. Stock or name of the custom rom.
Sent from my GT-N7105 using XDA Premium 4 mobile app
lost root, can't get it back
jlmancuso said:
Would help if you stated exactly which rom you were using. Stock or name of the custom rom.
Sent from my GT-N7105 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
First I want to thank you for the quick reply!!
it was still stock rom! sorry about that. I am still headed the custom rom way. Do you know about the bluetooth stack prob? I need a rom that has that fixed.
I found out what happened. the 64 gig Sandisk sd card was wonky and it lost the super user app that managed. (I had forgotten about it) I had tried several apps (to see if any could get root) I reloaded samsung drivers. I swapped cables. Finally all is well.
all of this and I haven't even soft bricked my phone! It is great to know that you guys are ready to assist. That is what makes me brave!
Thanks again!
Had to figure all this out the hard way.... Glad to see somebody posted for others. I wasn't aware that it was a general issue, I thought it was my config! ?
Sent from my SPH-L900 using Tapatalk
Is it safe to update the SuperSU Binaries? I've run into issues losing root previously doing so...
Hey y'all, sorry if this is a dumb question. I'm looking at rooting my son's Sprint Note 2. Currently it's on stock. If I follow this will it give me root so that I can install roms? I found one here on XDA that basically makes it a WiFi only tablet which is exactly what I need. Sorry again if I should have asked thus elsewhere but this just seems really straight forward and others have told me that rooting this phone was a huge pain. Currently it's on 4.4.2
Sent from my Nexus 6 using Tapatalk