Was unable to turn on Note 2 (stuck at samsung note 2 loading screen)
Went to flash, got the below message.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7105XXUFNG4_N7105OLBFNG1_N7105XXUFND3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> tz.img
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
anyone? All I have been doing is reflash the boot.tar.md5, and then try flashing another older firmware 1 by 1...
Lobaba said:
anyone? All I have been doing is reflash the boot.tar.md5, and then try flashing another older firmware 1 by 1...
Click to expand...
Click to collapse
Have you tried flashing this file before? It maybe a corrupted download. Please check.
erljayp said:
Have you tried flashing this file before? It maybe a corrupted download. Please check.
Click to expand...
Click to collapse
I have been downloading newer and older firmwares from samfirmware. tried up to 4 firmwares so far
Lobaba said:
tried up to 4 firmwares so far
Click to expand...
Click to collapse
I had flashing issues before only to know that my download is corrupted or when I extracted my stock rom, it didn't finish properly.
You can try reinstalling samsung drivers. What odin version are you using?
i tried version 3.10
Related
UPDATE: I was able to flash JB Update using odin 3 v185.[/B So problem is fixed.
I was trying to update my T999 via Kies to stock JB BUT update failed during the process. I believe I am in download mode
I see on the top
ODIN MODE (in red color)
PRODUCT NAME: T999
Custom Binary Download: Yes ( 1 Counts )
Current Binary: Custom
System Status:Custom
How do I restore this phone back to normal? I was trying to install stock jb via kie.
Thank you!
My suggestion is odin.
http://forum.xda-developers.com/showthread.php?t=1949687
mt3g said:
My suggestion is odin.
http://forum.xda-developers.com/showthread.php?t=1949687
Click to expand...
Click to collapse
Thank you, I just tried but no go; Odin failed.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T999UVDLJA_T999TMBDLJA_T999UVDLJA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> cache.img.ext4
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
I updated my i317M (Telus) via OTA and the next day it rebooted and went into boot loop.
I've tried flashing the phone with 4 different stock roms (from 4.1.2 to 4.4.2) but they all fail.
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I317MVLBMA3_I317MOYABMA3_I317MVLBMA3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've tried flashing Philz Touch recovery but that fails as well.
I've tried to boot it into recovery mode but it shows a dead Android with error logs like "E:failed to mount"
Help?
goyagoyago said:
I updated my i317M (Telus) via OTA and the next day it rebooted and went into boot loop.
I've tried flashing the phone with 4 different stock roms (from 4.1.2 to 4.4.2) but they all fail.
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I317MVLBMA3_I317MOYABMA3_I317MVLBMA3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've tried flashing Philz Touch recovery but that fails as well.
I've tried to boot it into recovery mode but it shows a dead Android with error logs like "E:failed to mount"
Help?
Click to expand...
Click to collapse
Try flashing with odin again but before flashing open the tar and remove the bootloader out of it.
Hi, thanks for the reply cnote.
Would the bootloader be sboot.bin or boot.img or both?
thanks again
edit: or rather, how do you remove the bootloader and remake the tar file?
goyagoyago said:
Hi, thanks for the reply cnote.
Would the bootloader be sboot.bin or boot.img or both?
thanks again
edit: or rather, how do you remove the bootloader and remake the tar file?
Click to expand...
Click to collapse
I believe it;s both. Just retrieve the tar file only.
sboot is the bootloader boot.img is the kernel .Have you tried the latest NH2 for your phone also maybe try using a pit file
The nh2 you will have to get from sammobile and the pit file can be found here http://forum.xda-developers.com/showthread.php?t=2609871
Also after odin is finished go into factory recovery and do a factory reset or its just going to sit at the boot screen
flashing pit file also gives an error :S
Hi!
I was trying to root my SM-P605 with Odin 3.09. The USB drivers are installed, Odin finds the device on COM4 and I an trying to flash the image from RootGalaxyNote.com (http://rootgalaxynote.com/galaxy-note-10-1-root/how-to-root-galaxy-note-10-1-2014-edition/. The current firmware is P605ZSUCNE1 (it's 4.4.2 version).
When the process starts, it goes ok until "writing NAND" and then says that writing NAND fails. Can anyone help?
Thanks in advance,
vomus said:
Hi!
I was trying to root my SM-P605 with Odin 3.09. The USB drivers are installed, Odin finds the device on COM4 and I an trying to flash the image from RootGalaxyNote.com (http://rootgalaxynote.com/galaxy-note-10-1-root/how-to-root-galaxy-note-10-1-2014-edition/. The current firmware is P605ZSUCNE1 (it's 4.4.2 version).
When the process starts, it goes ok until "writing NAND" and then says that writing NAND fails. Can anyone help?
Thanks in advance,
Click to expand...
Click to collapse
Use odin 3.07
Nop...
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> autorootp600mj4.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> cache.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
vomus said:
Nop...
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> autorootp600mj4.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> cache.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
you said you had a p605 and your using a p600 firmware.... it should fail to flash
root?
moabizzi said:
you said you had a p605 and your using a p600 firmware.... it should fail to flash
Click to expand...
Click to collapse
If you are just looking to root your TABLET
Go download Towelroot read instructions *easy* click letitrain now you have root ,then go to playstore and get superSU.. during install It will popup a message normal or twrp hit normal /
install if you have KNOX just say yes or no i said no
done. *youtube it any questions*
Or just use the correct root file .... I believe Chainfire has one somewhere?
So, I have the SM-G920P. I was encrypting it when it failed. Well that sucks. Fired up Odin, set my phone into download mode, loaded the only version of the stock rom I have (5.0.2). It was running the newest version of the firmware, 5.1.1 with the stage fright fix. I'm using Odin 3.10.6 and when ever I try to flash it, Odin just says this:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920PVPU1AOCF_G920PSPT1AOCF_G920PVPU1AOCF_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
How do I get it to pass?
Edit: I've tried different USB cables, different USB ports, everything.
ovil101 said:
So, I have the SM-G920P. I was encrypting it when it failed. Well that sucks. Fired up Odin, set my phone into download mode, loaded the only version of the stock rom I have (5.0.2). It was running the newest version of the firmware, 5.1.1 with the stage fright fix. I'm using Odin 3.10.6 and when ever I try to flash it, Odin just says this:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920PVPU1AOCF_G920PSPT1AOCF_G920PVPU1AOCF_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
How do I get it to pass?
Edit: I've tried different USB cables, different USB ports, everything.
Click to expand...
Click to collapse
From all I have read you can't Odin back to a previous version once on 5.1.1.
Try this: http://forum.xda-developers.com/showthread.php?p=62274187
Sent from my SM-G920P using Tapatalk
correct, you cannot go back after you're on 5.1.1, that's why it's not working, you need to Odin a 5.1.1 tar
sent from my S6 using tapatalk
I am having the same error messages in ODIN as the OP. EverYthing I flash through ODIN fails. Even flashing stock 5.1.1 OF7 fails. I believe it's because I was on OGA so I have to wait until the tarball for that comes out I guess.
was a solution to this ever found?
Orion9k0 said:
was a solution to this ever found?
Click to expand...
Click to collapse
Yes. Use the latest version of Odin (3.10.7 or 3.10.6, both can be found here: http://www.samsungodindownload.com/) and use the latest stock TAR from: http://forum.xda-developers.com/showpost.php?p=63956192&postcount=226
Check the md5 on your TAR download to make sure that it matches. In my experience getting a bad or incomplete download is the number one cause of errors.
And be aware that you CANNOT DOWNGRADE. If you flash to the latest stock and firmware, you can't go back.
my s6 dosen't want to be fomated by givng me msg of cant open the serial(COM)port,and when am removing it in the pc it is turning off,
Hi there!
I recently bought a N3N (N7505) :good: for mobile drawing. Since I bought it used, I found KNOX at 0x1 and the 4.4.2 it came with was already annoyingly buggy (lags everywhere, packed RAM & phone app FCs). I did manage to root it through CF-Autoroot (I think?) and even put a custom recovery (TWRP touch v2.8.7.0)
The problem is, everytime I download a ROM from Sammobile (md5 checks confirm undamaged downloads), it fails to flash via ODIN (flashes ALL THE WAY till the end and says FAILED - phone reboots perfectly to previous OS like nothing happened) and I'm wondering if I downloaded the wrong ODIN files, or is there something I'm missing?
So, i'm currently on N7505XXUCNL1 and wondering how I can reflash it (or a similar one) to refresh the phone anew :angel:
ROMz, Y U NO FLASH???
Any advice on what ROM would best suit me to refresh my N3N with???
:victory::victory::victory:Thanks in advance!!:victory::victory::victory:
UPDATE:
When i'm in Download mode, this is the information displayed
ODIN MODE
PRODUCT NAME: SM-N7505
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
Secure Download : Enabled
KNOX WARRANTY VOID: 1
AP SWREV: (2)
The ODIN log for when I try to flash N7505XXUCNL1_N7505OXXCNL1_TPH is here:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> modem.bin
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The ODIN log for N7505XXUCOE1_N7505SWCCOF1_SWC is here:
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> modem.bin
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Now I'm stuck on the Firmware update encountered an issue. Please select recovery mode in Kies and try again
can you provide us the log?
damadikaz said:
can you provide us the log?
Click to expand...
Click to collapse
The ODIN failed flash log??
Where do I find that?
damadikaz said:
can you provide us the log?
Click to expand...
Click to collapse
Greetings damadikaz,
I have posted my ODIN logs as an UPDATE on the main post for two separate flashes that both failed.
Any help is greatly appreciated:highfive::highfive::highfive:
Try flashing the latest stock ROM from here: http://www.sammobile.com/firmwares/database/SM-N7505/
Looks to me like the flash is failing because the bootloader currently on the phone is newer than the bootloader in the ROM you are flashing.
audit13 said:
Try flashing the latest stock ROM from here: http://www.sammobile.com/firmwares/database/SM-N7505/
Looks to me like the flash is failing because the bootloader currently on the phone is newer than the bootloader in the ROM you are flashing.
Click to expand...
Click to collapse
Oh WOW!!! It could be!
Thank you very much:laugh:
Going to download tonight and flash :good::good::good:
Will return with feedback!
Thanks again good sir! :highfive::highfive::highfive: