Q&A for [PORT] ANDROID L Preview for GEE
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
im having a problem when i flash this, there was a kernel named "kernelgeeb" for the e970 for this port, everything worked fine with previous version but with this one, flashing the kernel it goes on reboot and then gets in recovery, and if i install this without the kernel, it gives me green screen called "AP wachtdog detected" what should i do?
What's news on build 14.2?
Hi, thank for new your release. excuse me if my english have any problems. may i know battery still drain quickly and charge slowly in new build today? i was used build 11 and 12 and it so good for a new android version. please tell me, i can't post on thread because not enough 10 post before. thank you
SuperSU?
Excuse me. I update SuperSU 1.9.4 but it boot loop, when i reboot without update SuperSU, system can boot normally. so which version of SuperSU used?
vth102 said:
Excuse me. I update SuperSU 1.9.4 but it boot loop, when i reboot without update SuperSU, system can boot normally. so which version of SuperSU used?
Click to expand...
Click to collapse
SuperSU 2.14
Guys! What about connection to pc? I can't do it, my pc does'nt see my phone. How to fix that bug?
---------- Post added at 09:06 AM ---------- Previous post was at 08:57 AM ----------
Guys! My phone is e975 and i don't have mobile data working, and pc connection! How to fix these bugs? Please, help me!
---------- Post added at 09:11 AM ---------- Previous post was at 09:06 AM ----------
Can't use mobile data anc pc connection! how to fix these bugs? LG-e975
Is there any benefit over kevijoa's rom?
Data?
Hey am I the only one with the LS970 that is having data issues with the newest update? If not does anyone know how to fix it?
Bootloop (Stuck on "Google" logo) with the latest, latest build?
Hey, I'm a new guy here (I think), and I just wanted to thank y'all for all your time and effort. Having Lollipop on my Sprint Optimus G is just great. I tried out the Pesky-Wabbit build today and it worked, albeit without any cell service. I tried the latest version, hoping for that fix, but it's stuck on the 'Google' boot screen. Any ideas on what to do? I can still access recovery.
Thanks, really appreciate it
LRX13C-GEE_Pesky-Wabbit-B10_V1.1
Hi guys, im new xda member and sorry for my bad english..
first. Thanks thx the ported L Rom, a love it.
second, I share my experiences today test some release
LRX13C-GEE_Pesky-Wabbit-B10_V1.1: sometimes randomly end calls, today Two kernel crash, 3-4 restart after bootloop, many app bugged or looped, randomly google service and google app stopped and frozen.
Thanks e975 development guys )
Hey bro! Awesome rom, but could you make and upload here kernel of kevinjoa's rom? I know, you told me how to make it, but i couldn't do that. The guys here including me will appreciate that!!!
hi
i have installed a rom android l of this link
https://s.basketbuild.com/devs/Kevinjoa/gee-l/
release 14.4 but not work,and the pc not driver,search driver mako.not work internet,not work wifi,not work download mode,not work microphone in the calling.and i not possible at pc because not driver.not present altre rom in the devices-help me please-
But you can still access the recovery menu , right?
You don't have another ROM on your phone's storage?
If you don't have another ROM in your SD card, you probably can push a ROM file through ADB, and then flash from recovery.
Sent from my LG-E970 using XDA Free mobile app
E973 GEEB
Hey all, I'm wondering if there if it is possible for me to run this android L port on my phone. I read the whole thread but couldn't find a conclusive answer as to what to flash for it to work on GEEB. Can someone link me to the right files?
Thanks
Hi, check the links in this post http://forum.xda-developers.com/showthread.php?p=56191578
I'm gonna try that in a few minutes. Probably everything is working fine except for SD card detection.
EDIT: Well With the kernel on the link (jollaman's) WiFi doesn't work. Data and camera work. Maybe replacing some WiFi files can fix it, maybe, I don't know which ones though.
Sent from my LG-E970 using XDA Free mobile app
GEEB Builds
Please tell me in finding the latest build for GEEB (AT&T)
The links in my previous post is the latest build right now 10/22/14. The release 15.1 and the jollaman's kernel for geeb, but WiFi and SD working working with that combo. I'll probably wait until someone builds it from source.
Sent from my LG-E970 using XDA Free mobile app
GEEB
KevTheGuy said:
The links in my previous post is the latest build right now 10/22/14. The release 15.1 and the jollaman's kernel for geeb, but WiFi and SD working working with that combo. I'll probably wait until someone builds it from source.
Sent from my LG-E970 using XDA Free mobile app
Click to expand...
Click to collapse
Yes... WiFi and SD is not working
For Geeb, at least in my testing...
If you flash the following build, then the geeb kernel, you will have working WiFi (and cellular data), but no access to the external sdcard.
fjsferreira said:
Here's Build 11. Please, report back your findings...
https://mega.co.nz/#!Ac9CSb7L!mn6C_2hSpcOL__pFO9prV5rmcmGpbhYtew229-Bgtvc
Click to expand...
Click to collapse
Geeb
Rockwig said:
For Geeb, at least in my testing...
If you flash the following build, then the geeb kernel, you will have working WiFi (and cellular data), but no access to the external sdcard.
Click to expand...
Click to collapse
Tried it, does not work orientation and proximity sensors
Related
Q&A for [ROM] CM11 Development for T210(R)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] CM11 Development for T210(R). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Keep up the great work. Looking forward to some updates, wouldn't mind running CM11 on a Touchwiz tablet. It'll definitely increase performance. I have CM11 on my S4 Mini and it's fantastic. Much better than the slow Touchwiz stock ROMs. Samsung needs to learn a few things from you awesome developers!
Well done for the great progress and to even be able to run CM11 at this early stage is a big accomplishment!
I bow down to your awesomeness! +1,000
Cm11 first stable build link
Mustafa's Tab cihazımdan Tapatalk kullanılarak gönderildi
Is it hard to load cm 11 on a note 3?
Sent from my SAMSUNG-SM-N900A using XDA Free mobile app
Wi-fi won't turn on?
I used this rom and flashed it as normal, but Ii am having wi-fi issues. The wi-fi will not turn on and the wi-fi icons are grey instead of white. I tried another factory reset and wiped the cache, but to no avail. What do I do? No internet on it - I'll die of sadness.
Thanks in advance,
CyanidePi
CyanidePi said:
I used this rom and flashed it as normal, but Ii am having wi-fi issues. The wi-fi will not turn on and the wi-fi icons are grey instead of white. I tried another factory reset and wiped the cache, but to no avail. What do I do? No internet on it - I'll die of sadness.
Thanks in advance,
CyanidePi
Click to expand...
Click to collapse
Read the OP.
gr8nole said:
Read the OP.
Click to expand...
Click to collapse
Okay, I assume you mean give more detail? (btw thanks for making it possible to have CM11 on my Tab- even though it's not working ATM Ii appreciate the effort put into it!) I'm running 4.4.2 KitKat, and I'll try to run through what I did from the beginning:
1. Loaded CWM onto the Tab through Download Mode via ODIN. Went well.
2. Rebooted and loaded the CM11 PreAlpha 3 from my pc onto the Tab. No problems.
3. Booted into recovery. Did not back up, as I factory resetted the tab a day or so before trying this (I know I should have done it anyway though...). Went well.
4. Installed the CM11 zip. Loaded fine, but the ROM didn't start up (stayed in spinning animation) and I had to leave the Tab to run out of gas before I tried it again.
5. After trying to reinstall the CM11 ROM, it loaded up fine. Was slightly laggy, but no other problems. Until....
6. Tried to turn on Wi-Fi in setup. Wouldn't turn on, and I thought it was a little bit weird. Continued to set up without a CM account.
7. Tried to turn on wi-fi. Didn't work. Went into settings, would turn on but would still display "turn on wifi" and wouldn't display any routers. Tried to scour the web for help, and decided to factory reset the Tab again. Also cleared cache.
8. Same thing happened again. Tried re-flashing CM. Didn't help.
9. Now trying to sideload the PreAlpha 2 because the Tab is taking a long time to turn on, i.e. won't escape the startup logo (this time Samsung).
That's about what I did. Any help?
CyanidePi said:
Okay, I assume you mean give more detail?
Click to expand...
Click to collapse
No, I meant for you to actually read the OP (original post). It clearly states "THIS ROM IS NOT READY FOR THE COMMON USER" and also states "Please do not post bug reports for the time being. I am aware that it has many, many issues. Please only post relevant DEVELOPMENT discussion."
gr8nole said:
No, I meant for you to actually read the OP (original post). It clearly states "THIS ROM IS NOT READY FOR THE COMMON USER"
Click to expand...
Click to collapse
Oh. So it does. Ah well, I guess I'm gonna have to see this through or try and install the stock rom again. Sorry for wasting your time.
Am I the only one not being able to install CM11 at all? I just install it from philz and reboot system and it just goes back to recovery. Help? Been trying everything here.
cm11 alpha kernel
I tried to install cm11 alpha on my tab 3 7.0, but after I flashed it it went back to twrp and it never installed. Do I have to install a kernel with it? thanks
tupolevpilot said:
I tried to install cm11 alpha on my tab 3 7.0, but after I flashed it it went back to twrp and it never installed. Do I have to install a kernel with it? thanks
Click to expand...
Click to collapse
Same question here
Hope we get cm11
Sent from my SM-T210R using XDA Free mobile app
Can I try to install this ROM on SM-T211 ?
I know that data connection will be unavaible. But there will be others problems ?
No wifi any help
Sent from my SM-T210 using XDA Premium 4 mobile app
---------- Post added at 02:23 PM ---------- Previous post was at 02:06 PM ----------
Do you need a kernel or something
Sent from my SM-T210R using xda premium?
Read the op from the original thread.
Sent from my MB886 using XDA Free mobile app
Still supported?
Is this still supported or discontinued already? My tab suuucks agh.
cm11 unofficial for tab 3 sm-t210(r)
Hi, i was wondering if cm11 for the tab 3 7.0 will still be worked on?
Thanks
whether there will be stable version whether or not
gr8nole said:
Read the OP.
Click to expand...
Click to collapse
Hello Friends apologize bother me know if whether there will be a stable version this cm11 for the T210 (R)
I think cm11 is getting closer to having wifi. Can anyone tell if camera, video is working. If it has wifi, camera and video its enough of a cm to me.
Sent from my SM-T210 using XDA mobile app
Q&A for [ROM] [08SEP] AICP - 6.0 - KK 4.4.4_r2 [Endeavoru]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] [08SEP] AICP - 6.0 - KK 4.4.4_r2 [Endeavoru]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
AICP v7 boot.img/rom issue
Since the last release v7 the Rom is not functioning correctly for me (bsod's, stuck). Changing the kernel to cm17 or Slim kernel isnt working either. with cm17 Rom was starting correctly, but some tweaks were not possible (i.e. under the one x Settings-app). after installing the v7 many times with the other kernels i return to v6 now.
Does somebody have a clue bout this Situation or are People living with another kernel and missing some goodies of the great Rom?!?
WiFi issues?
Hey, I'm new to this forum so hopefully I'm posting this in the right thread - please forgive me if I'm not.
I flashed AICP - 6.0 - KK 4.4.4_r2 on my HTC One X last night and then did the OTA update to 7.0 NIGHTLY0 (20141106) - everything working smoothly so far, loving the ROM. However, there's one issue with WiFi: it keeps turning off by itself, and once it does, it's impossible to switch it back on (tapping the tile in the notification bar has no effect at all, and if I go to settings the WiFi switch is disabled). Reboot sometimes solves the problem but not always.
Is this a known issue? I hope anyone can help me with that as I really like the ROM, don't want to switch back to another one. Many thanks in advance!
Oh, I'm running Google Apps Version 4.4.4 (0), not sure if this is of any importance.
jakobvie said:
Is this a known issue? I hope anyone can help me with that as I really like the ROM, don't want to switch back to another one. Many thanks in advance!
Click to expand...
Click to collapse
Hey Jakobvie
in my opinion the kernel isn't working right with the v7 Rom. Using one of the other mentioned Kernels makes the Rom run smoothly again but there are a few functions that won't be there any more... so these are no possibilities for me. I guess i'll wait for a reworked kernel.
Thank you
Just wanted to say thanks to you guys at AICP as I've been using your roms since the Desire HD, I know this has probably gone in the wrong thread but it referred me here.
Blank screen
hi, aicp v6 have still blank screen issue? and i need aicp gapps full offical link empty
Here are the mobile network patches:
Thömy said:
review DOT cyanogenmod DOT org SLASH 79834
review DOT cyanogenmod DOT org SLASH 79835
Click to expand...
Click to collapse
(cant post links, sorry, xda is being a ... towards new users)
12-13 build didn't work, couldn't use it with the yesterday's boot image either, couldn't enable Wifi without having a total ****load of logcat errors. Meh.
I only became a black screen, any help?
EDITroblem solved
I fullwiped, all except for the SDcard, then I installed the rom, then I flashed the boot.img, I seem to be getting a boot logo for 2 mins, then a black screen.
What am I doing wrong?
network workin on 14-12, vidéo recording not working
Sent from my One X using XDA Free mobile app
ByteBite said:
I fullwiped, all except for the SDcard, then I installed the rom, then I flashed the boot.img, I seem to be getting a boot logo for 2 mins, then a black screen.
What am I doing wrong?
Click to expand...
Click to collapse
Try the new build I posted to the thread.
video recording works on 20-12 build,?
Sent from my One X using XDA Free mobile app
betexino said:
video recording works on 20-12 build,?
Sent from my One X using XDA Free mobile app
Click to expand...
Click to collapse
Nope. Not yet
i notice that i am unable to write to the system partitions with es file exporer even thogh it has root access. i seem to remember perhaps having on an old daily having to enable a setting somewhere. is my recollection correct and if so what is this setting?
thnks
In aicp_endeavoru_lollipop-1.0RC0-NIGHTLY-20150107 bootloop problem still remain
Galneryus said:
In aicp_endeavoru_lollipop-1.0RC0-NIGHTLY-20150107 bootloop problem still remain
Click to expand...
Click to collapse
Should be fixed in 11th
---------- Post added at 09:35 PM ---------- Previous post was at 09:34 PM ----------
betexino said:
video recording works on 20-12 build,?
Sent from my One X using XDA Free mobile app
Click to expand...
Click to collapse
Works now @betexino
Everytime I reboot apps that are on the Sd card disappear
Every reboot my apps from the SD disappear and I have to reinstall them on aicp_endeavoru_lollipop-1.0RC0-NIGHTLY-20150122
moshe sokol said:
Every reboot my apps from the SD disappear and I have to reinstall them on aicp_endeavoru_lollipop-1.0RC0-NIGHTLY-20150122
Click to expand...
Click to collapse
If you have their icons oh home screens, then yes they may disappear depending on the launcher you use since it takes a while after boot for SD card to be available but apps remain on SD card. All this on a stock aicp installation.
[Q&A] [GT-I9190/I9195][ROM][Official][5.0.2] CyanogenMod 12.0 Nightlies for S4 Mini
Q&A for [GT-I9190/I9195][ROM][Official][5.0.2] CyanogenMod 12.0 Nightlies for S4 Mini 3G/LTE
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [GT-I9190/I9195][ROM][Official][5.0.2] CyanogenMod 12.0 Nightlies for S4 Mini 3G/LTE. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Arco, I don't think you'll ever be thanked enough for all the work you have done for the S4 mini. I mean it. Many, many, many thanks and please keep it up for as long as you can because plenty of us appreciate what you're doing. I'm part of a big silent majority (longtime lurker of the XDA forums, never poster) and I've made this account just to tell you this.
Hi
This is awesome, firstly thanks to arco68 and Cm team and contributors for all this hard work.:good:
Id like to know has anyone experienced no-sound-in-call bug? and how is bluetooth audio these days?
How long does the first reboot?
I have already installed twice, but when I reboot is in the CM Logo boot more than 20 minutes does not start.
Did a clean install! And my recovery is the latest 6.0.5.1!
At this point I have not done reboot and is working, but when you? Until I'm afraid!
Does anyone have this problem?
MushyMan said:
Hi
This is awesome, firstly thanks to arco68 and Cm team and contributors for all this hard work.:good:
Id like to know has anyone experienced no-sound-in-call bug? and how is bluetooth audio these days?
Click to expand...
Click to collapse
Hi, I think BT audio is fixed but I can't confirm you about the car...
xuleca said:
How long does the first reboot?
I have already installed twice, but when I reboot is in the CM Logo boot more than 20 minutes does not start.
Did a clean install! And my recovery is the latest 6.0.5.1!
At this point I have not done reboot and is working, but when you? Until I'm afraid!
Does anyone have this problem?
Click to expand...
Click to collapse
Hi, your device has booted ?
Oijkn said:
Hi, your device has booted ?
Click to expand...
Click to collapse
First time YES, but if I reboot it's stuck in CM logo.
Did you check the md5 of your downloaded file perhaps it's bad ?
xuleca said:
How long does the first reboot?
Click to expand...
Click to collapse
The first boot loop animation lasted 12 minutes in my case. But I also installed a full stock gapps package, so I think it shouldn't be longer than that.
Oijkn said:
Did you check the md5 of your downloaded file perhaps it's bad ?
Click to expand...
Click to collapse
I check and checksum is ok
---------- Post added at 10:22 PM ---------- Previous post was at 10:20 PM ----------
puscasumarin said:
The first boot loop animation lasted 12 minutes in my case. But I also installed a full stock gapps package, so I think it shouldn't be longer than that.
Click to expand...
Click to collapse
And did you reboot after?
My first boot take some time but boot, the problem is when I reboot
Try to do a full wipe but with another recovery like Philz Touch and do a new clean install.
How can i disable the hardware button light up when i touch the screen? i only want them to light op when i touch the buttons.
Thanks in advance.
update
Hey! Will we get upates ofer the cm update( from setings ) or we have to flash every new build?
Thanks for suport!
Normally you can use the CM Update from the settings that work great !
But for my part I prefer to download it from my computer because sometime I've got an md5sum error if I download it from my phone (depend of your internet connection...).
Oijkn said:
Normally you can use the CM Update from the settings that work great !
But for my part I prefer to download it from my computer because sometime I've got an md5sum error if I download it from my phone (depend of your internet connection...).
Click to expand...
Click to collapse
SAme here one time
@ Daryl the light can.t be enabled only on toch the buttons .
xuleca said:
And did you reboot after?
My first boot take some time but boot, the problem is when I reboot
Click to expand...
Click to collapse
After all was set up and running, I did at least one manual reboot. Everything went normal for me.
Oh.. It's annoying Every time i touch the screen it lights up..
And messages app FC cleared data same
Btw, perfect cm rom!
DaryI said:
Oh.. It's annoying Every time i touch the screen it lights up..
And messages app FC cleared data same
Btw, perfect cm rom!
Click to expand...
Click to collapse
You cand disable the light and problem solved :
message app works well until now. No problem here
Hi, can someone please confirm or put me in the right direction. Thanks in advance.
I'm currently running F4k unofficial cm 12 with F4k pre4 kernel, if I format everything and clean install this ROM will I have to flash a different kernel (if so which one) or will it install its own kernal along with the rom? as I've read that f4k pre4 kernel is not a good combination with this rom as it works in a different way.
Hope this makes sense an someone can enlighten me.
Thanks
Insomniac-Butler said:
Hi, can someone please confirm or put me in the right direction. Thanks in advance.
I'm currently running F4k unofficial cm 12 with F4k pre4 kernel, if I format everything and clean install this ROM will I have to flash a different kernel (if so which one) or will it install its own kernal along with the rom? as I've read that f4k pre4 kernel is not a good combination with this rom as it works in a different way.
Hope this makes sense an someone can enlighten me.
Thanks
Click to expand...
Click to collapse
Flashing this official CM and GApps you will have CM kernel as all. :good:
BLN control says that kernel doesn't support functionality :/
Q&A for [ROM][OFFICIAL][VALIDUS LOLLIPOP][v7.0][D852]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][OFFICIAL][VALIDUS LOLLIPOP][v7.0][D852]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Validus for G3 D852
I just installed my first rom on my LG G3 D852 and am liking it a lot. It's the Validus Lollipop rom, it's giving me an issue when I plug it into the computer... It's not showing up as a drive and therefore cannot transfer anything. I've reflashed it and the GAPPS zip but no change. Anyone have a solution?
Thanks to anyone who can help!
This is awesome
I was literally about to sell my LG G3 til I saw this thread, installed the new Validus and bam! not only works like a charm but it's amazing.
Whats the best camera to go along with this rom? Im wilking to try if i can get a camera experience close to stock quality
Sent from my LG-D852 using Tapatalk
pyro224 said:
Whats the best camera to go along with this rom? Im wilking to try if i can get a camera experience close to stock quality
Sent from my LG-D852 using Tapatalk
Click to expand...
Click to collapse
This one is damn near perfect....just flash in recovery....it supports 4k video and android wear as well....Ive tried them all and this is my favorite...
https://www.dropbox.com/s/x4n4wdlsin3q3mb/MotoAppsMaterialAOSP.zip?dl=0
---------- Post added at 10:00 PM ---------- Previous post was at 09:54 PM ----------
Cool Mo D said:
I just installed my first rom on my LG G3 D852 and am liking it a lot. It's the Validus Lollipop rom, it's giving me an issue when I plug it into the computer... It's not showing up as a drive and therefore cannot transfer anything. I've reflashed it and the GAPPS zip but no change. Anyone have a solution?
Thanks to anyone who can help!
Click to expand...
Click to collapse
Do you have usb debugging checked in developer settings??
just so you know as well, apps like box or drop box are the new way of doing what you're trying to do..... install box on your computer....install the app on your phone.(you get 50gb free)...add your files you want to transfer to the box sync folder on your computer.,...open the app on your phone and the files are there....lol....download them to your device....I haven't plugged my phone into my laptop for like 2 years..... way better and easier than a cable.....and then you also have access to those same files on any device you own....or other computers (by logging into your box account)
try it out....thank me when you realize how awesome it is...
Ariesdroid said:
This one is damn near perfect....just flash in recovery....it supports 4k video and android wear as well....Ive tried them all and this is my favorite...
https://www.dropbox.com/s/x4n4wdlsin3q3mb/MotoAppsMaterialAOSP.zip?dl=0
Click to expand...
Click to collapse
Report that file is malicious after download?
DelBoy said:
Report that file is malicious after download?
Click to expand...
Click to collapse
It shouldn't be? its just my personal dropbox...lol...I've sent it to others with no problem...try downloading with chrome...
Sorry if this is stupid but will this 852 Rom work on my 855 g3?
Thanks
please help
can anybody direct me to a step by step guide to install custom roms. im new to roms. i want to flash validus rom for lg g3 d852. please can anybody help. i had samsung s3 before g3. it had complete guides.
i read through some topics. i just want to know that im on stock rom, do i need to unlock through bump or i can just directly flash twrp recovery and flash this rom?
Ariesdroid said:
This one is damn near perfect....just flash in recovery....it supports 4k video and android wear as well....Ive tried them all and this is my favorite...
https://www.dropbox.com/s/x4n4wdlsin3q3mb/MotoAppsMaterialAOSP.zip?dl=0
Click to expand...
Click to collapse
Cool thanks. I realize that nothing will get exactly like stock but do you feel the picture quality is close enough?
Also I rooted my phone and install twrp last year..... Do i need to update twrp or anything like that? Or can I just flash with an older version of twrp?
Sent from my LG-D852 using Tapatalk
navbains said:
can anybody direct me to a step by step guide to install custom roms. im new to roms. i want to flash validus rom for lg g3 d852. please can anybody help. i had samsung s3 before g3. it had complete guides.
i read through some topics. i just want to know that im on stock rom, do i need to unlock through bump or i can just directly flash twrp recovery and flash this rom?
Click to expand...
Click to collapse
You need to root... https://www.dropbox.com/s/7w48wjtf7yqybg3/Stump-v1.2.0.apk?dl=0
then flash the twrp 2.8.0.0 image of twrp with flashify app from your stock ROM ...(its already bumped)..It will bump your device.
here's 2.8.0.0 image: https://www.dropbox.com/s/yo3yqopl7ifj8ab/twrp-2.8.0.0_d852-signed.img?dl=0
Then flash the updated twrp 2.8.3.0 for d852 in recovery...
https://www.dropbox.com/s/42bi1nwtt44dxe0/twrp-2.8.3.0_d852-bumped.zip?dl=0
then 'reboot recovery".don't reboot phone!...reboot recovery from twrp advanced reboot menu...then you're ready to flash lollipop roms..
Make a backup with the newly installed twrp 2.8.3.0 and then do a full wipe ...(everything except internal storage and ext sdcard)
then flash rom
flash gapps
reboot and enjoy...
---------- Post added at 05:06 PM ---------- Previous post was at 05:04 PM ----------
pyro224 said:
Cool thanks. I realize that nothing will get exactly like stock but do you feel the picture quality is close enough?
Also I rooted my phone and install twrp last year..... Do i need to update twrp or anything like that? Or can I just flash with an older version of twrp?
Sent from my LG-D852 using Tapatalk
Click to expand...
Click to collapse
Just flash it and try it...its very close to the same as stock...and even has 4k video and android wear support
You need twrp 2.8.3.0 or higher for lollipop roms....I use 2.8.3.0
* see my post above this one as i just explained how to update twrp to 2.8.3.0
---------- Post added at 05:49 PM ---------- Previous post was at 05:06 PM ----------
Thanofski said:
Sorry if this is stupid but will this 852 Rom work on my 855 g3?
Thanks
Click to expand...
Click to collapse
No it wont...we have a d855 build available on our google + community.... go there 'Ground Zero ROMs'
I can't find the 4k option though
ateam_7 said:
I can't find the 4k option though
Click to expand...
Click to collapse
no idea....i was told it has 4k video....I don't ever record video with my phone so not sure....go back to stock if you need that....
DelBoy said:
Report that file is malicious after download?
Click to expand...
Click to collapse
Hmm what browser you using? I just downloaded using Chrome on OSX and no issues at all....
You activate 4k video recording by swiping right from the main camera screen, and then hitting the little video camera icon...
IR Blaster App recommendation
Hi I'm currently running the latest test build on my rogers D852 and I've noticed that in the threads the IR blaster is working. I've installed a few IR Blaster apps and none of them seem to work so are there any recommendations on working apps? Aside from that, thank you so much for all the hard work, I've been following Validus since the early test builds towards the end of December 2014 and its great to see this device getting support for custom roms etc..
ravisingh1151 said:
Hi I'm currently running the latest test build on my rogers D852 and I've noticed that in the threads the IR blaster is working. I've installed a few IR Blaster apps and none of them seem to work so are there any recommendations on working apps? Aside from that, thank you so much for all the hard work, I've been following Validus since the early test builds towards the end of December 2014 and its great to see this device getting support for custom roms etc..
Click to expand...
Click to collapse
probably best to quote whoever said its working and ask them....I still haven't tried it, and never use it....
Ring volume not working
Hi There, I just installed the ROM but for some reason my Ring Volume icon is not highlighted and ring is not working at all, I tired to select ring tones but non of them work, any ideas?
ukrik said:
Hi There, I just installed the ROM but for some reason my Ring Volume icon is not highlighted and ring is not working at all, I tired to select ring tones but non of them work, any ideas?
Click to expand...
Click to collapse
Reboot? I have no idea? I haven't had that issue here at all....nor has anyone else. Try a full wipe and clean flash if all else fails.
Xposed Framework
Was anybody able to get Xposed to work successfully on this ROM with the D852? Clean install
Q&A for [ROM] Cyanogenmod 11 06/04/2015
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] Cyanogenmod 11 06/04/2015. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
camera
hi. good job
video recorder not working
jocamoaz said:
hi. good job
video recorder not working
Click to expand...
Click to collapse
yeah that is a cm11 bug from before
I tried to (I got the cpu step) rom and I like. But what is the difference between RELEASE 3 and (got the cpu step) and I wonder fix some performance stabilization in Release 3
I wanted to write in that rom's forum but I have written so far
Sorry i cant speak good english, i want to flash this rom to my phone and the phone give it for me : installation aborted status 0. What can i make? my cwm is 6.0.3.2 and i want flash from other 4.4.2 rom.
Thanks for help.
first you have to use cwm 6.0.5.3 for gio,than do a factory reset first with 6.0.5.3 and than flash rom.
devrieshh said:
first you have to use cwm 6.0.5.3 for gio,than do a factory reset first with 6.0.5.3 and than flash rom.
Click to expand...
Click to collapse
can u add a link for me from cwm 6.0.5.3? please. thank you
Starchm said:
can u add a link for me from cwm 6.0.5.3? please. thank you
Click to expand...
Click to collapse
You can get it from this post here
http://forum.xda-developers.com/showthread.php?p=54754255
Sent from my XT1039 using XDA Free mobile app
....ty for link and helps
Hello !
I have recently installed this ROM (Release 4.5 + Video Recording patch). Everything works.
I would like to know however, where I could get a functionnal G-Apps ? I only really need the Google Play Store + whatever else makes the Play Store work.
Hope you can help me, thanks.
Future development
Hi there HerroYou,
I want to say thank you for this stable rom. It works pretty well without significant bugs.
Will you continue its development? It will be nice to hear something about ART instead of Dalvik
It's a joke, of course, but will be pretty nice if you could improve it further...
Wish you all the best!
---------- Post added at 11:02 PM ---------- Previous post was at 10:59 PM ----------
burnout6010 said:
Hello !
I would like to know however, where I could get a functionnal G-Apps ? I only really need the Google Play Store + whatever else makes the Play Store work.
Hope you can help me, thanks.
Click to expand...
Click to collapse
You should install these Gapps: link, it works well.
For CM11, of course.
corlik said:
You should install these Gapps: link, it works well.
For CM11, of course.
Click to expand...
Click to collapse
Thanks for answering.
I flashed a completely fresh install of the ROM with the indicated G-Apps (+CM-Account) and now get "Google Play Services has stopped" errors constantly.
Am I doing something wrong ? I don't understand.
corlik said:
Hi there HerroYou,
I want to say thank you for this stable rom. It works pretty well without significant bugs.
Will you continue its development? It will be nice to hear something about ART instead of Dalvik
It's a joke, of course, but will be pretty nice if you could improve it further...
Wish you all the best!
Click to expand...
Click to collapse
Sorry for the late reply,
I might continue development for this phone. I might stop after I get a working camera for cm11 (autofocus).
Cloud
who have the latest version, just in another cloud (gdrive, one, mega) and tell me how to update the firmware version of the 2013 s to the final (possibly version bore the other person)
final download
hello all sorry I'm new
which version should i download for my galaxy gio
msm or msm7x27
and can you please explain briefly what they are and why
Thanx
Cyber Skull said:
hello all sorry I'm new
which version should i download for my galaxy gio
msm or msm7x27
and can you please explain briefly what they are and why
Thanx
Click to expand...
Click to collapse
It depends which kernel version you want to use.
msm is 3.0.31 and msm7x27 is 2.6.37
Sent from my XT1039 using XDA Free mobile app
cvamoose said:
It depends which kernel version you want to use.
msm is 3.0.31 and msm7x27 is 2.6.37
Sent from my XT1039 using XDA Free mobile app
Click to expand...
Click to collapse
as i said im new to this and any suggestions