Develop Bugs

Something's draining my battery faster than it's charging

I have a dock at work that I place my phone onto every day as soon as I arrive. I noticed at about 11 AM today that my phone was showing 72% battery, even though it should have been fully charged when I left this morning at 9 and had been sitting on the charger since 9:30. More annoyingly, it seems to be staying at about that level--it's not moving up at all. If anything, it's continuing to lose charge even as the icon shows it's charging!
I took it to a Sprint store, where they unhelpfully suggested that I have too many apps installed that are draining the battery in the background. I manually stopped most of them, uninstalled some that I don't really use, and put it back on the charger. It's still not going anywhere. I turned the phone completely off for an hour and charged the thing, and it had gained about ten percent (that seems pitiful, but at least it's charging?). It's back on the charger, still not really moving anywhere.
So what are my options at this point? I've never calibrated the battery, so maybe I need to do that. Other than that all I can think is that either the battery is going bad (but I have a feeling Sprint is going to insist "It's still charging" if I take it back to them and refuse to give me another battery), or perhaps the dock is not supplying the right voltage and hence it's not charging fast enough to overtake the power consumption.
What's bugging me is that I haven't installed anything in the past week that should be affecting my power consumption like this. Last week I had plenty of apps installed with GPS and bluetooth always on, and as long as the phone was docked it would eventually reach 100%. Now I have pretty much everything off, several apps I usually have running turned off, and several more uninstalled (including Lookout Security), and the battery is barely making any headway. I keep the screen on to a desk clock (because that's the whole point of a freaking dock), but that alone shouldn't be draining it faster than it can charge.
Any suggestions?

Sounds to me like its not getting enough voltage. When you charge it at home does it charge reasonably fast?
Sent from my SPH-D710 using XDA

I never really monitor it, but I would say so, yeah. All I really check is that it's fully charged in the morning before I walk out the door.
The culprit might be my dock. It says it's designed specifically for the GSII but the cable itself looks to just be your standard USB-to-microUSB dock, other than a little bump at the bottom so that it's clearly aimed for bottom-charger phones like an iphone or SGSII. I suspect it might be supplying less voltage than the charger that came with the phone.
Is there anything I can look at (app or internal setting) that can tell me what kind of voltage the phone is receiving?
EDIT: Should also note that it's sitting on the dock now and it is at least making positive gains on the battery, albeit at maybe 1% every fifteen minutes. I really don't remember it being this slow before. Perhaps the dock's cable is cheap and is just crapping out over time.

USB charging is about half the speed of regular, wall socket charging. Invest in an OEM charger or one that has similar specs to an OEM one.
Sent from my Galaxy S II, AOKP style.

do you have the dock connected to a USB port on a computer/laptop or wall outlet?
USB charges at 150mah while most ac adapters charge at between 750-1000mah.

Well, when I used the my generic LG USB cable it took about 5 hours to reach from 0% to about 40% while shut. So, I changed the cable and viola, charging to full in less than 3 hours while working on it.
So, it seems that the charger is bad quality. Try using the original cable (if possible) or may be the original charger plug.
I guess that's the only solution, because there is no way that the phone is discharging at a faster rate than charging, except when it is connected to an external display. This is the only thing that I encounter where the phone goes dead after a while despite it is connected to the charger...

Yeah, that dock is a POS. I'm not surprised it charges slow as balls too.
Amusingly, my phone has been running on the battery since leaving work for about four hours with the screen off, and it's only at 92%! I must have uninstalled whatever was draining it so quickly.
Thanks, guys.

If you think it's an application draining it, try better battery stats in the market. Might not be the problem but it does help.
Sent from my iPhone killer.

ahmadshawki said:
Well, when I used the my generic LG USB cable it took about 5 hours to reach from 0% to about 40% while shut. So, I changed the cable and viola, charging to full in less than 3 hours while working on it.
So, it seems that the charger is bad quality. Try using the original cable (if possible) or may be the original charger plug.
I guess that's the only solution, because there is no way that the phone is discharging at a faster rate than charging, except when it is connected to an external display. This is the only thing that I encounter where the phone goes dead after a while despite it is connected to the charger...
Click to expand...
Click to collapse
That's right. Use Original cable came with your phone.
I've experienced same thing when I tried to charge my D710 over LG micro usb charger thru AC outlet. The charging indicator was showing flash but actually it was not charging or charging speed was not enough to follow the battery usage.
I charged the phone all the night but in the morning it was empty!
Charging through the original Samsung micro usb cable, it never failed. But charging thru LG micro usb failed couple of times.
You can easily check a couple of things -
try to connect micro usb cable to your PC and set the USB mass storage mode.
If we use LG micro usb over samsung phone, it's not perfectly fit and data communication frequently fails. More importantly, Don't even try to odin your phone using LG micro usb.
It's not the issue of charger. It's the cable issue.
Do not use LG Micro USB cable for data communication, but if you want to use for charging, be sure that you hear the connection sound from the phone. If there's no connection sound, the battery won't last long even battery charging status shows the flash.
Hope this help.

Anyone else having problems with extremely slow charging?

When I first got this phone I noticed it charged pretty slow. 5 hours to get to full from 0% but it then got a lot worse. Over night it would only charge from like 18% to 41 so I got a new charger and wall adapter and that seemed to fix it for a couple days but now it is charging slow again. From 70% to 100 it takes about 6-7 hours. Anyone else experiencing this?

The only time I've heard of that happening is when people fail to 'condition' their lithium battery properly before normal use.
In other words, upon getting your new phone, and/or battery, you're suppose to allow your battery to fully discharge and then fully recharge 3-5 times to condition your battery before plugging it back in half way through discharge.
It's usually what the carrier sales clerks are suppose to tell you when purchasing a new smartphone.
Here's a simple article on the subject:
http://www.ehow.com/how_4797458_condition-cell-phone-battery.html
Sent from my SPH-L710 using xda app-developers app

drewmonge said:
The only time I've heard of that happening is when people fail to 'condition' their lithium battery properly before normal use.
In other words, upon getting your new phone, and/or battery, you're suppose to allow your battery to fully discharge and then fully recharge 3-5 times to condition your battery before plugging it back in half way through discharge.
It's usually what the carrier sales clerks are suppose to tell you when purchasing a new smartphone.
Here's a simple article on the subject:
http://www.ehow.com/how_4797458_condition-cell-phone-battery.html
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
I never had/has/have doing it. And I dont have battery issues.
I think the battery calibration/cycle..etc is just a myth.
Go to the store and check for warranty.
Sent from my SPH-L710 using Tapatalk 2

Could it be a rouge app causing it to take so long to charge? I noticed today Google maps was using a lot more of the battery than usual. Almost as much as the screen. I tried force stopping but it just starts right back up again. Any ideas on how to fix the maps app? I have a feeling that is what is causing it.

I have this problem. It is very annoying and I have no idea what causes it. It doesn't happen all of the time though.

rbtrucking said:
Could it be a rouge app causing it to take so long to charge? I noticed today Google maps was using a lot more of the battery than usual. Almost as much as the screen. I tried force stopping but it just starts right back up again. Any ideas on how to fix the maps app? I have a feeling that is what is causing it.
Click to expand...
Click to collapse
Just sounds like a bad install of something. I would do a factory reset through the stock recovery, and make sure to wipe dalvik cache.

My phone has started charging slowed as well, but mostly when connected to the computer. I made sure my usb ports were set to not allow the computer to shut them off to conserve power and it seems a bit faster. As far as charging and discharging ect ect I don't do that and never had a problem with slow charging and even the couple of times I tried it, the battery life never really improved. So think it is needed and some think it is a waste of time.

Charging via a computer USB port will always be slow when compared to the higher current capacity of the included AC charger. Computer USB ports have a lower current rating.
Make sure your using the charger that came with the phone, not all chargers are created equally.
There's also been some talk about the quality of USB cable being used, but I haven't found that myself yet.

Little bit of info...
I have tried numerous chargers while at work here (Technician) and there are some issues.
Samsung is funny on which chargers it accepts. Very funny.
1. Stardard charger that comes with the device will charge best. (Obvious I know) Using wall charger. (Full charge in 3.5 to 4 hours from 1%)
a. Using USB end plugged into PC while charging takes typically from my tests double the time to charge. (I'm guessing that data connection to PC is slowing the charge. (Full charge in 6 hours from 1%)
2. 3rd Party Generic charge cables (usb cable only) still charges device however stardard power draw is lower and does not charge in a decent time period.
a. Some 3rd Party usb cables plugged into a pc showed charging however they did not keep enough of a draw to actually charge my phone. I lost battery instead of gaining.
3. LG chargers did nothing for me. Couldn't get a decent charge.
Motorola chargers gave me the best charge besides the original.
Chargers with replacement tips... what can I say. They didn't seem like a good idea and weren't. I had too many issues and at times had some overheating issues. Luck of the draw me thinks.
3rd party wall chargers were hit or miss. A few did seem to give me a decent charge, others gave me a very slow trickle charge taking anywhere up to 8-9 hours for a full charge from 1%
All in all... it's a crap shoot using 3rd party cables. It's all based on voltage output and Samsung likes to change things alot. You will still get a charge but who knows the length of time it will take.
Oh and car chargers... typically only good for keeping it at the same level you plugged it in at for short drives. Long drives obviously work much better.
Hope this helps.

About charging: I have noticed that micro USB cable that come with S3 is really bad - it is loosing a connection to PC,and, beside that, I have noticed several times slow phone charge... Accidentally went to settings- battery - when I was on AC charger and saw in settings that phone is actually charging in USB mode!!! Wtf??? Disconnect usb from bottom end (at charger side) and reconnect and then on phone says " charging - AC" ... So,conclusion is that you check your phone charging status when you put on charger,maybe it is charging in USB mode and because of that phone is charging slower than it should on regular AC power.

The only battery issue that i have noticed is when i use my computer to charge it takes forever but when i use the factory wall plug and cable it charges quickly with no issues

Excellent post supercholo. Really helpful. I was starting to think my phone was broken.
Anyone got any experience with using an ipad charger on an sIII. I know an ipad wants a lot of power to charge.
FYI These are the voltages listed on my chargers;
Apple ipad1 charger 5.1v 2.1a
SAMSUNG s3 wall charger 5v 1a
Samsung Galaxy i9000 wall charge 5v .7a
supercholo said:
Little bit of info...
I have tried numerous chargers while at work here (Technician) and there are some issues.
Samsung is funny on which chargers it accepts. Very funny.
1. Stardard charger that comes with the device will charge best. (Obvious I know) Using wall charger. (Full charge in 3.5 to 4 hours from 1%)
a. Using USB end plugged into PC while charging takes typically from my tests double the time to charge. (I'm guessing that data connection to PC is slowing the charge. (Full charge in 6 hours from 1%)
2. 3rd Party Generic charge cables (usb cable only) still charges device however stardard power draw is lower and does not charge in a decent time period.
a. Some 3rd Party usb cables plugged into a pc showed charging however they did not keep enough of a draw to actually charge my phone. I lost battery instead of gaining.
3. LG chargers did nothing for me. Couldn't get a decent charge.
Motorola chargers gave me the best charge besides the original.
Chargers with replacement tips... what can I say. They didn't seem like a good idea and weren't. I had too many issues and at times had some overheating issues. Luck of the draw me thinks.
3rd party wall chargers were hit or miss. A few did seem to give me a decent charge, others gave me a very slow trickle charge taking anywhere up to 8-9 hours for a full charge from 1%
All in all... it's a crap shoot using 3rd party cables. It's all based on voltage output and Samsung likes to change things alot. You will still get a charge but who knows the length of time it will take.
Oh and car chargers... typically only good for keeping it at the same level you plugged it in at for short drives. Long drives obviously work much better.
Hope this helps.
Click to expand...
Click to collapse

Very slow charging with OEM charger.. i9300
This is a fact. The OEM wall charger surely has some issues. Though 1amp output, as claimed on th specs chart, my i9300 charges super slow. From 80% to 100%, it takes nearly 3 hours.
So, i switched chargers and used my S2 and Note OEM wall chargers. And voila, the phone charges super fast. I even ordered a new OEM charger for s3 with the data cable included and the same issue occured.
This has worsened ever since the JB update. So I am now using the S2 charger and very satisfied.
SWTICH OVER GUYS!! OEM charger is useless,,,

I have had my phone on USB to computer charging for 7 hours, with a one hour break to watch Dexter. I was at 18% and I am now at 69%. I think I will have to use the wall adapter because this is just ridiculous.

Usb to pc will always be slow buddy. It outputs 500ma while d wall charger is 1 amp
I found my Usb cable faulty. Sent for replacement.
Cheers
→→Android▶◀▶◀ ROCKS!◆◆◆

Without reading all the post. I have had this same problem. Took phone to sprint, they tested the battery and it was bad. Got a new one and good to go..

"Intelligently" charging the battery...

The L980 is the first phone I've owned that notified me when it was "slow charging" versus regularly charging--regularly, as in simply showing a message saying "charging has begun." I don't have a single complaint about this monster of a battery, but I'm extremely anal with and adamant about not frivolously charging my devices in order to extend the battery's longevity.
My first question is if this behavior is even necessary.... I remember reading a few years ago that lithium-ion battery cells "get weaker" each time they are plugged in to begin a new charge cycle--no matter the current battery level, from 0% to 99% full--and subsequently lose longevity. Is this even true? If so, for this phone, does changing charge state (b/t slow charging and normal charging) have the same effect on the battery as does beginning a new charge cycle?
Just wondering. So far, I've been able to make it 2 days on one full charge!!

I personally don't think it matters which mode it's in. I will say that the phone has a flag that shows you slow charging if the amperage isn't up to what the stick charger puts out. You can technically say that this phone has a" rapid charge" feature that's always activated until it senses a lower amperage.
Sent from my LG-E980 using xda app-developers app

May I know under what conditions that you will be notified it is "slow charging" versus regularly charging? I have never had that notification either when I charge it with the USB cable or the wireless charger..

I've had it say that occasionally when plugged into the USB port on my computer, or into my car charger.

russilker said:
I've had it say that occasionally when plugged into the USB port on my computer, or into my car charger.
Click to expand...
Click to collapse
I've noticed that it also matters how you put - or better - TURN your charger in the wall socket (I tried turning it 180 degrees, thus changing the polarity of the fork and voila, my phone charges fast)

[Q] Anyone using Qi charging?

I'm curious if anyone has been using Qi charging with their TabPro? Anyone's comments would be appreciated.
I used a micro-usb Qi coil receiver between my TabPro 8.4 and the Poetic case for a few weeks without issues.
But then something happened to cause the Qi charging pad to overheat. I ended up having to have the TabPro 8.4 replaced by BestBuy as the TabPro would no longer charge at all, even trying different micro-usb cables and 2.1 amp power adaptors. What was even stranger, was the battery continued to drain even after powering the TabPro off! I'm puzzled as to what was damaged, but the end result was the battery went from 41% charge to 7% charge overnight even though it was powered off (not sleeping, but powered off) and not connected to a charger. When I discovered it was at 7% I removed my account info, but even with the charger plugged in, the battery went down to 3% while working on the TabPro. When I checked on it an hour latter it was dead. If I plugged in the charger, after about 20 seconds it would flash the green battery for about a second, then it would go out. No boot, no charging, even after leaving it charging for 24 hours.
So I'm very reluctant to try to use Qi wireless charging on my replacement tab. I suspect the Qi charging pad failed and overheated. There is a spot about the size of a dime where the plastic partially melted on the charging pad. The Poetic case and the TabPro look fine, and the charging pad still acts like it is working. Very puzzling. Any ideas or cautions?

ron12 said:
I'm curious if anyone has been using Qi charging with their TabPro? Anyone's comments would be appreciated.
I used a micro-usb Qi coil receiver between my TabPro 8.4 and the Poetic case for a few weeks without issues.
But then something happened to cause the Qi charging pad to overheat. I ended up having to have the TabPro 8.4 replaced by BestBuy as the TabPro would no longer charge at all, even trying different micro-usb cables and 2.1 amp power adaptors. What was even stranger, was the battery continued to drain even after powering the TabPro off! I'm puzzled as to what was damaged, but the end result was the battery went from 41% charge to 7% charge overnight even though it was powered off (not sleeping, but powered off) and not connected to a charger. When I discovered it was at 7% I removed my account info, but even with the charger plugged in, the battery went down to 3% while working on the TabPro. When I checked on it an hour latter it was dead. If I plugged in the charger, after about 20 seconds it would flash the green battery for about a second, then it would go out. No boot, no charging, even after leaving it charging for 24 hours.
So I'm very reluctant to try to use Qi wireless charging on my replacement tab. I suspect the Qi charging pad failed and overheated. There is a spot about the size of a dime where the plastic partially melted on the charging pad. The Poetic case and the TabPro look fine, and the charging pad still acts like it is working. Very puzzling. Any ideas or cautions?
Click to expand...
Click to collapse
The only thing I can think of is maybe the Qi charging pad failed to deliver 2.1 Amps to correctly charge it (I don't think they even make 1 Amp coils yet? - though I could be wrong.) , maybe the tab went into charging mode but it was really discharging since not enough current was going in that it needed to charge + keep the tablet running so in the end maybe it destroyed the battery since it went completely flat which is usually a bad thing for l-ion battery's
Usually when android says the battery is at 0% the battery really has about 20% remaining for protection of the battery and preventing it from going completely empty (l-ion can really be drained to 2.5v but android reads 0% around 3.4v or 3.2v if i remember correctly as protection from flat-lining the batt), however if it was under charging mode I'm sure it would override this as it thinks it's plugged in so it's not paying attention to the battery, but really the batt is draining to compensate for the underpowered charger, that would be my guess maybe constantly using the Qi charger the battery circuitry changed the battery status from lv 2 (good) to ~ lv 4 (bad) since it wasn't receiving the current it was supposed to and the circuitry thought something was wrong with the battery cells or the battery just went bad since it was always under a charging / discharging state never reaching 100%.
on a side note
I found this tablet to be very fussy when using other chargers then its official one, I have tried several chargers and they just dont function like the stock one for example
HP Touchpad charger 5.3v - 2.0A - Very high quality charger and even won some awards for beating out other chargers - I found this would sometimes not fully charge the tablet to 100% it would idle around 98% (I have two of these chargers) - Charge current starts around 1800 mAh drops to 200 mAh when battery gets full don't think its enough to top it off. (charges at 5v)
10,000 mAh Power-bank (5v , 2.0A), found out this would not fully charge the tablet either it would get to 80%, upon further inspection the 2A port was only delivering about 1 Amp of current according to my amp reader (voltage drop to 4.98)
Samsung official charger (5.3v 2.0A)- though seems to start at a pretty high 5.60 volts (higher then other chargers) , and charges at about 1870 mAh , always reaches 100% with this charger. (I have two of these chargers since I bought another one as backup - both do the same thing)

otyg said:
The only thing I can think of is maybe the Qi charging pad failed to deliver 2.1 Amps to correctly charge it (I don't think they even make 1 Amp coils yet?
. . .
Usually when android says the battery is at 0% the battery really has about 20% remaining for protection of the battery and preventing it from going completely empty (l-ion can really be drained to 2.5v but android reads 0% around 3.4v or 3.2v if i remember correctly as protection from flat-lining the batt), however if it was under charging mode I'm sure it would override this as it thinks it's plugged in so it's not paying attention to the battery, but really the batt is draining to compensate for the underpowered charger, that would be my guess maybe constantly using the Qi charger the battery circuitry changed the battery status from lv 2 (good) to ~ lv 4 (bad) since it wasn't receiving the current it was supposed to and the circuitry thought something was wrong with the battery cells or the battery just went bad since it was always under a charging / discharging state never reaching 100%.
on a side note
I found this tablet to be very fussy when using other chargers then its official one, I have tried several chargers and they just dont function like the stock one for example
HP Touchpad charger 5.3v - 2.0A - Very high quality charger and even won some awards for beating out other chargers - I found this would sometimes not fully charge the tablet to 100% it would idle around 98% (I have two of these chargers) - Charge current starts around 1800 mAh drops to 200 mAh when battery gets full don't think its enough to top it off. (charges at 5v)
Click to expand...
Click to collapse
That could be the case. Yet, for two weeks, the Qi charging had no problems taking the charge to 100%. It would charge a bit over 15% an hour. The Galaxy Charging Current app reported between 670 and 750ma charging current using Qi charging.
At this point I'll likely never know, but it could be the battery itself simply failed on the tablet. My question is mainly to see if anyone else has used Qi charging, and what their experience is. How can I display the battery status (you referenced lv 2 (good) to ~ lv 4 (bad))? The battery app from the Play Store does display "battery health" but I've only seen it say "Good".
On your side note, I occasionally plug the tablet into the USB port on my computer (measures 5.10V), and it charges at about 10% an hour while sleeping, and has repeatedly charged the battery to 100% when I leave it connected. I have an EnrePlex Jumper Prime 4400mAh that measures 5.18V, and charges at 1.5A. It has charged the battery to 100%, though will run out of juice if the battery is lower than 40% before I use it, it measures 5.18V.
I have an old Galaxy Tab 2 10.1 that I often charge via the computer's USB port, although it takes a long time, and it's battery is still fine after almost 3 years.

ron12 said:
That could be the case. Yet, for two weeks, the Qi charging had no problems taking the charge to 100%. It would charge a bit over 15% an hour. The Galaxy Charging Current app reported between 670 and 750ma charging current using Qi charging.
At this point I'll likely never know, but it could be the battery itself simply failed on the tablet. My question is mainly to see if anyone else has used Qi charging, and what their experience is. How can I display the battery status (you referenced lv 2 (good) to ~ lv 4 (bad))? The battery app from the Play Store does display "battery health" but I've only seen it say "Good".
On your side note, I occasionally plug the tablet into the USB port on my computer (measures 5.10V), and it charges at about 10% an hour while sleeping, and has repeatedly charged the battery to 100% when I leave it connected. I have an EnrePlex Jumper Prime 4400mAh that measures 5.18V, and charges at 1.5A. It has charged the battery to 100%, though will run out of juice if the battery is lower than 40% before I use it, it measures 5.18V.
I have an old Galaxy Tab 2 10.1 that I often charge via the computer's USB port, although it takes a long time, and it's battery is still fine after almost 3 years.
Click to expand...
Click to collapse
The battery app from the play store probably does the same thing just shows a status as a replacement of the health, you can see the status with logcat occasionally you will see something like this ---
you might need root for some of these commands., you can use Terminal Emulator , adb shell, or sshd to access these commands.
Logcat::
1.
"D/BatteryService( 934): level:83, scale:100, status:3, health:2, present:true, voltage: 4091, temperature: 234, technology: Li-ion, AC powered:false, USB powered:false, Wireless powered:false, icon:17303447, invalid charger:0, online:1, current avg:-378, charge type:0, power sharing:false"
2. (shell)
dumpsys battery
will output something like this
Current Battery Service state:
AC powered: false
USB powered: false
Wireless powered: false
status: 3 < - unplugged
health: 2 <- health:2 would translate to good , health 1 would be excellent (though I have never seen a 1 status , 3 poor, 4 bad
present: true
level: 83
scale: 100
voltage: 4114
current now: -140
temperature: 248
technology: Li-ion
3. (shell, you can check out other files in the /sys/class/power_supply/battery/directory but be careful not to modify them)
cat /sys/class/power_supply/battery/health
Good

Slow / Inconsistent charging

Hello!
Charging problems started to occur a month ago on my phone. The problem is that it charges really slowly, but other times normally.
I experienced that if I plug in the phone when the battery is between 20-60% it charges super slowly.
Sometimes it speeds up but more often not.
Here are some screenshots that show that sometimes it takes like 6 hours to charge and sometimes it basically just hovers around a percentage and doesnt do anything. Gets like 10% overnight.
On the second picture you can see that it charges normally till it reaches 55% then it slows down to like 5%/hour speed.
I noticed this while the phone was draining battery even tho it was plugged in while using it.
I bought a new OEM battery and its the same with it aswell. Some chargers charge it quicker, some slower, but the problem occurs with every charger.
What do you guys recommend me to do?
Thanks a lot!

is your charger 2 Ampere as it should be?
U can also try to recalibrate the battery deleting the data/system/batterystats.bin file

haget83 said:
is your charger 2 Ampere as it should be?
U can also try to recalibrate the battery deleting the data/system/batterystats.bin file
Click to expand...
Click to collapse
Thanks for the reply!
I have used many chargers since I have this problem, but mostly the one that came in the box.
Ill try deleting that file if its possible withouth root.
Edit: It seems i need root for it, so its not an option for me.

Kr3Ep said:
Thanks for the reply!
I have used many chargers since I have this problem, but mostly the one that came in the box.
Ill try deleting that file if its possible withouth root.
Edit: It seems i need root for it, so its not an option for me.
Click to expand...
Click to collapse
Actually brother initially same problem occured with me and it was persisting on the same way load since i come to change my charger now before i was charging it with blackberry passport charger it was really cool and even charges it faster that i mean around 50% faster than the previous charger, but now days m befitted with moto g4+ which meets to charge my lg g3 around 65% faster
But brother dont use any local company pr anypther charger as it may damage the phone display which may come to cost you at high

There are going to be 3 main factors that you want to address:
- Battery
- Charger/charging cable
- Software
It seems you have already addressed your battery. That's usually the #1 culprit, but you've already replaced it so you can rule that out.
The next is the charger and charging cable. This is often overlooked. The stock charger is 5 volts and 1.8 amps (5v 1.8a). Before more advanced smart phones were developed, almost all USB chargers never produced more than a 5v 1.0a charge (most were 5v 0.5a). So you want to ensure you are using at least a 5v 1.8a charger. (I even use my Fire Tablet charger on my G3 which is 5.1v 2.2a, and that works great too). Note that all USB chargers have their output volts/amps printed on them somewhere (usually in very tiny print). The USB cable you are using matters too. The thinner the wire gauge and the longer the cable is, the less power is transmitted. For example, if you're using a thin and cheap 6 foot (2 meter) USB cable on a 5v 2.0a charger, you may only be getting 1.0a of charge from it. If you use a thicker, shorter, and more expensive 3 foot (1 meter) USB cable on that same charger, you ensure you get that full 2.0a of charge (or close to it). The two factors to look for in a USB cable is length (length = resistance = less amps) and wire gauge (not insulation thickness).
The last is software. If you have any way to backup and restore (ie nandroid) your ROM from recovery, I recommend doing that first because it's easy. If you backup your current ROM, factory reset, and the issue persists then you know its the charger/cable. If the issue is gone, then you know it's something in your current ROM. If you do not have access to backup/restore features and/or do not have root, then next you can use the Android OS Battery stats to carefully go over what could possibly be draining so much power when the phone is on or off. There are also several apps that will help you determine where the battery drain is coming from. Note that software can not prevent your phone from charging, but it can drain power so fast, that there is not enough left over to charge the battery. This is especially bad for our G3s because they easily overheat if they are charging and heavily discharging simultaneously.
Hope that helps! Good luck! :fingers-crossed: