Good days to everyone!
I've got a situation with my GT-N7100. It doesn't seem to get past the first logo during boot-up, ever.
I've tried the newest MD5 version for that model. "N7100UBUEND1_N7100TCEEND1_N7100UBUEND1_HOME.t ar.m d5"
Used the PIT file to Re-Partition and several versions of Odin.
With the PIT file, only version V3.07 hangs at, "Get PIT for mapping..", all other versions seem to fail.
Pit File used: Q1_20110914_16GB.pit
Pit File used: PIT_N7100_16GB_20121102
Without the file I get: (Using the tar.md5 packet with V3.07 Odin)
<ID:0/004> Firmware update start..
<ID:0/004> tz.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
Odin V3.09
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
The phone will not go into recovery mode, the only thing I can get it to do is enter download mode.
How this started? Holding the phone, looking at it. It reset itself and never came back.
I disabled my Anti-Virus... Not sure what else to try. Thank you very much in advance!
***UPDATE*** (I was able to enter recovery mode but it seems to fail to mount anything.)
***UPDATE*** (At wits end, not sure what else to try. I'm thinking the NAND has become corrupt and or unrecoverable. Or unless there was a way to, similar to PC's, do a chkdsk repair. At this time i'm downloading the toolkit and attempt anything through ADB, I feel there is nothing more I could do to Un-Brick the phone. I read about Soft/hard Brick, the phone seems to be Soft Bricked but nothing is allowing me to repair/recover through any download method. Booting into recovery fails to mount everything [as seen in pics]. So this is hard Bricked?)
Related
So I attempted the root process via ODIN. Every time ODIN would hang on the <ID:0/004> SetupConnection.. step For greater than 15 minutes. I pulled the battery and attempted the process again 3 times.
After that I got the phone --!-- computer error saying " Firmware upgrade encountered an issue."
Now when I plug the phone into ODIN now get
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection.. and it hangs.
I have double and triple checked my drivers. Running odin in admin mode... tried compatibility mode... Tried Kies Recovery [does absolutely nothing]
I had this issue back on my Vibrant and all we had to do was flash the stock .tar image and the .pit files...
Do we have / are we working on the stock image and/or .pit files?
Is there anything I can do to help solve this issue?
EDIT: Redid the steps on an old laptop and it worked like a charm... weird. So if your phone gets stuck on setup connection try it on another computer. It might have been because I messed with ODIN so much with my vibrant?? *shrug*
So, I've recently wanted to use a custom ROM for my phone, and I have done this before, but there's a bunch of changes I guess. I thought that "unified s3" meant that the ATT variants and others (including my i747m) would be compatible, so I tried to flash "Liquid Smooth v3.0" ROM but it didn't work with TWRP. So I got CWM and restored my phone (also my restore file by accident) so my phone was totally wiped, but I could flash the ROM. The problem occurs here, the phone WILL NOT boot, it is stuck at the "Samsung Galaxy S III" splash and won't go past it. I cannot delete the cache or anything without the phone restarting itself. I tried to flash a modem with Odin but get an error also.
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> modem.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
I've been searching the forums for a way to fix my i747m but I cannot find anything. Any solutions or is my phone dead. Also I can get into both recovery and download screen. I cannot flash a stock ROM because another error pops up. And when I go into download mode and flash, the "QUALCOMM SECUREBOOT: ENABLE" turns into "SECURE CHECK FAIL : aboot"
Tonamon said:
So, I've recently wanted to use a custom ROM for my phone, and I have done this before, but there's a bunch of changes I guess. I thought that "unified s3" meant that the ATT variants and others (including my i747m) would be compatible, so I tried to flash "Liquid Smooth v3.0" ROM but it didn't work with TWRP. So I got CWM and restored my phone (also my restore file by accident) so my phone was totally wiped, but I could flash the ROM. The problem occurs here, the phone WILL NOT boot, it is stuck at the "Samsung Galaxy S III" splash and won't go past it. I cannot delete the cache or anything without the phone restarting itself. I tried to flash a modem with Odin but get an error also.
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> modem.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
I've been searching the forums for a way to fix my i747m but I cannot find anything. Any solutions or is my phone dead. Also I can get into both recovery and download screen. I cannot flash a stock ROM because another error pops up. And when I go into download mode and flash, the "QUALCOMM SECUREBOOT: ENABLE" turns into "SECURE CHECK FAIL : aboot"
Click to expand...
Click to collapse
Since you can get into both download and recovery modes, there is plenty of hope and your phone is far from dead. Odin probably failed because you were trying to flash incompatible firmware or one that involved a bootloader downgrade attempt. You may be able to recover by re-flashing the correct firmware from (custom) recovery. You need to provide more information including what stock were you on before going custom and what stock you are now trying to revert to. When flashing stock firmware, however, you need to be sure you are working with the right ones. In spite of the near similarity in the names, firmware for the i747U... (AT&T) is different from the Canadian versions (i747M...) and you should be careful to pick only the ones specific to your phone model. You probably were on a 4.3 bootloader so your safest bet now may be to search for and download the i747M 4.3 stock rom, bootloader/modem and kernel zips and reflash these via recovery. If you are on TWRP, you may also do an advance wipe to remove all existing firmware before flashing new ones.
I have a Telus Note 2 sgh-I317M I believe it has android 4.3 on it but not sure. It was rooted using chainfires method.
I am not able to enter recovery mode but I can enter download mode.
If the phone is in download mode and I open Kies it spins on connection but never connects. If phone isnt in download mode Kies doesnt see it.
With Odin is able to see the phone in download mode but when I try and do anything the results are below.
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have tried uninstalling Kies and I have used Odin v1.85, V1.3 and V3.10
and I have tried different firmware for the phone starting with 4.3
I have tried using a different computer and different usb cables.
I have a second note 2 that is able to connect to both Odin and kies on this computer.
If I should post this question else where my apologies and please point me in the right direction.
What am I missing in trying to get this fixed? Google research mentions PIT files but Im not familiar with them and I haven't found a step by step guide.
Try using Odin 3.07. I only use 3.07 and I have had great success.
Download the latest Telus ROM from sammobile. Open Odin, do no check anything except F.reset time. Flash the ROM in PDA. When you see the word Reset in the status window, remove the usb cable from the phone, pull the battery and leave it out for about 10 seconds, replace the battery, boot into recovery, perform a factory wipe, and reboot.
SOLVED SOLVED SOLVED
JUST FLASHED THIS BPH4 https://drive.google.com/file/d/0B_gPYnMt2KosdGxGQXY1bzFjSE0/view
---------------------------------------------------------------------
Guys, anyone knows how to come out from this? Please...
EDIT:
Here is what odin says.
<ID:0/009> Odin engine v(ID:3.1100)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Removed!!
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> sboot.bin
<ID:0/009> NAND Write Start!!
<ID:0/009> RQT_CLOSE !!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
EDIT 2:
If i flash BL from N920AUCU1AOGG stock rom i receive
<ID:0/009> Odin engine v(ID:3.1100)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009> Can't open the specified file. (Line: 2012)
<OSM> All threads completed. (succeed 0 / failed 1)
EDIT 3:
Reflashed the same bl with the pit file from csc, and this..:
<ID:0/009> Odin engine v(ID:3.1100)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> sboot.bin
<ID:0/009> NAND Write Start!!
<ID:0/009> param.bin
<ID:0/009> FAIL!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Don't flash the bootloader.
Please help me, i bricked my phone
It doesn't go beyond, samsung logo,
I tried to flash OJ1 firmware again using Odin, then i tried to updraded but failed twice. Now i am unable to boot at all.
I am able go to download mode but can't go to recovery. even after reflashing stock rom i stuck in samsung logo and cn't go beyond and can't go to recovery. but able to go to download mode. Please help.
Please help me how can i repartition my At&T glaxy note 5 and get the PIT file and other stuff for AT&T version of note 5. I shall be very very thankful.
Please help .....what to do now.
dradil said:
Please help me, i bricked my phone
It doesn't go beyond, samsung logo,
I tried to flash OJ1 firmware again using Odin, then i tried to updraded but failed twice. Now i am unable to boot at all.
I am able go to download mode but can't go to recovery. even after reflashing stock rom i stuck in samsung logo and cn't go beyond and can't go to recovery. but able to go to download mode. Please help.
Please help me how can i repartition my At&T glaxy note 5 and get the PIT file and other stuff for AT&T version of note 5. I shall be very very thankful.
Please help .....what to do now.
Click to expand...
Click to collapse
Download the file i linked give a try
Kundinga said:
Download the file i linked give a try
Click to expand...
Click to collapse
Thank you so much. I have downloaded the file. and tried to update it and i was able to flash it and phone booted well, but it restarts again and again. it happens with all the file. Thank you so much for this atleast phone booted. I loaded all the 4 files except the PIT file.
Should i also try to load the PIT file? How to load a PIT file what should i do, should i check the partition option in ODIN with PIT file. What should i do, is it any solution? of this restart again and again, i also tried to wipe cache in recovery, now my phone is able to run into the recovery.
Thanks a million time.
dradil said:
Thank you so much. I have downloaded the file. and tried to update it and i was able to flash it and phone booted well, but it restarts again and again. it happens with all the file. Thank you so much for this atleast phone booted. I loaded all the 4 files except the PIT file.
Should i also try to load the PIT file? How to load a PIT file what should i do, should i check the partition option in ODIN with PIT file. What should i do, is it any solution? of this restart again and again, i also tried to wipe cache in recovery, now my phone is able to run into the recovery.
Thanks a million time.
Click to expand...
Click to collapse
Put every file in his right section and load the pit, in Odin there is a menu hidden by a button on the left, one of the three let you load the pit (now I don't remember very well the interface hahah give a try)
Kundinga said:
Put every file in his right section and load the pit, in Odin there is a menu hidden by a button on the left, one of the three let you load the pit (now I don't remember very well the interface hahah give a try)
Click to expand...
Click to collapse
Thank you once agian for the reply.
Should i check the "re-partition option" after loading the PIT and then Start?
Hello, I was just wondering if anyone can help me fix this problem, anyways, I bought the phone it was on Android 9 Pie, I got the notification for software update, the phone was working fine, the owner said to me that there was a motherboard issue which I neglect and I'm fully sure that it's a software problem with the latest update, anyways, I downloaded and installed the update and when it finished It started going in nonstop bootloop, I tried flashing the device with the latest firmware, the Carier ID is: INS(INDIA), however when I try to flash the phone the Odin shows me this:
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 5716 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> param.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Phone also says SW REV CHECK FAIL (Bootloader) Device 7, Binary: 6 after failed ODIN flashing
I know the error is saying to me that I'm trying to DOWN-grade the phone but it's the latest official firmware for the phone, i tried also flashing it with on BL and AP in Odin and Z3x tools, however when I try to flash it in Z3X tool and when I insert only AP and BL the loading on the phone goes to the middle, and sometimes Z3X tool shows that the flashing is done but it's still in a Bootloop.
Honestly I'm desperate for the help, any kind of help will be appreciated, if someone knows how to help and needs fruther information, feel free to ask.
Thanks in advance!
Also I cannot enter to Recovery Mode the phone either goes to Download Mode or constant bootloop
Well, i think the phone has the wrong CSC or something else.
I was seeing the SW REV CHECK FAIL part and it seems like that the phone's binary is U7, but firmware is U6, meaning that the phone has a different CSC.
If it's possible, flash another firmware with a different CSC, but with U7.
And tell if it works.
Do you have any link to U7 firmware I tried flashing with like 10 combinations, none of them worked, I was searching for U7 firmware but i couldn't find it, I haven't slept for 3 days trying to fix it, or if you can tell me how can I recognize the file combination has the U7 firmware, I think there's a some trick in reading the symobols in combination files but I don't know, thanks for replying!