Develop Bugs

[Q] Problems to install cm7

Hi,
I'm having problems to install cm7 port. First of all, i would like to thanks Alquez by the great job he's done in this port.
And now, my problem. When i try to install cm7 from recovery, and after wipe data, cache and all, i select install from zip, and when start the proces i obtain this error message:
I've checked the zip md5sum, and i don't obtain the same result indicated by Alquez. I tried downloading the file several times, even downloading it from the different available servers, and I always get the same md5, being different to that indicated by Alquez.
I don't know what to do. Can anyone, that have the correct file, upload it to another server?. Or i'm doing anything wrong?
Thank you very much.

the error message
Sorry,
The error message is:
Installing update.....
assert failed: getprop("ro.product.device")=="marvel" ||getprop("ro.build.product")=="marvel" || getprop(ro.product.board") =="marvel"
E: Error in /sdcard..../update-cm-7.2.0.RC0....zip (Status 7)

What version of CWM do you use? Make sure you are using the version that alquez posted on development section
Sent from my A953

The md5sum of the current version (2011-12-16) doesn't match.
$ md5sum -c update-cm-7.2.0-RC0-marvel-KANG-signed.zip.md5
update-cm-7.2.0-RC0-marvel-KANG-signed.zip: FAILED
md5sum: WARNING: 1 computed checksum did NOT match

I'm using CWM version 3.2.0.1_xda.cn.
I'll try to install ClockworkMod Recovery v.5.0.2.6 and i'll try to flash CM7 port again.
Thanks for replies. I'll post the results of this try.

Problem solved
OK,
Finally I've could install CM7 on my wildfire s. The problem was at the CWM i was using.
I've installed the new version (5.0...) and the problem was solved.
Thank you all.
Sorry if my english is not very good.

[Q] my made custom rom wont install

HI
Sorry if i am in the wrong section to post. If I am, please move to a more convenient group.
I made a custom Rom in the android kitchen. Everything went through well, no problems at all. then when I try to install to my phone, it wont install and I get these errors:
One error I got while installing was: Installation Abored: Status 6.
Now I get this error white installing: E:Cant open /sdcard/primou_signed_031613_094637.zip (bad) Installation aborted.
Whats going on because I havent changed/converted any update scripts just added an apk then zip aligned it. The original roms install ok, but my own dont install when everything is set the same.
please help me. THANKS
I can upload my two custom roms for you to have a look to see if you can make sense of it. it is for HTC ONE V gsm.

Just try to unzip it and zip it again using WinRAR or 7Zip

[Q] B117 update - assert failed: apply_patch_check

Hi there,
for some time now I have been trying to update B116 to B117 getting the same error message every time:
View attachment 2311424
assert failed: apply_patch_check ("/system/app/HwCloudDrive.apk" ... )
E:Error in /sdcard/HwOUC/update.zip
(status 7)
I am guessing the update does not match the HwCloudDrive.apk (not sure, new to this). What have I tried:
1. Check the /system/app/HwCloudDrive.apk - not found in the folder, nor anywhere else on the phone. Searched the web, downloaded one apk, install failed for no reason (reason not stated, just that it failed)
2. Restoring factory settings several times
3. re-downloading many times
4. updating online as well as localy
So far nothing worked out. Some details about my phone:
Its P6-U06, android 4.2.2, baseband IMC1202_PENTA, kernel 3.0.8-00821, build B116SP01, bought in China, using New Zealand SIM (could this be a problem?)
Any help would be much appreciated
Thanks to all!

Same issue updating error
Hi! I'm stucked with the same problem, I have tried to update it from external, wipe all data but nothing is worked, did you find a way??
ouzoliny said:
Hi there,
for some time now I have been trying to update B116 to B117 getting the same error message every time:
View attachment 2311424
assert failed: apply_patch_check ("/system/app/HwCloudDrive.apk" ... )
E:Error in /sdcard/HwOUC/update.zip
(status 7)
I am guessing the update does not match the HwCloudDrive.apk (not sure, new to this). What have I tried:
1. Check the /system/app/HwCloudDrive.apk - not found in the folder, nor anywhere else on the phone. Searched the web, downloaded one apk, install failed for no reason (reason not stated, just that it failed)
2. Restoring factory settings several times
3. re-downloading many times
4. updating online as well as localy
So far nothing worked out. Some details about my phone:
Its P6-U06, android 4.2.2, baseband IMC1202_PENTA, kernel 3.0.8-00821, build B116SP01, bought in China, using New Zealand SIM (could this be a problem?)
Any help would be much appreciated
Thanks to all!
Click to expand...
Click to collapse

Hi there,
nope, I haven't found the way. I tried a few more time since the post, no change, still the same problem. I have posted the message on huawei support, no reply. I'm at the stage of no-trying anymore, waiting for the next update and see...
Mrpinkman said:
Hi! I'm stucked with the same problem, I have tried to update it from external, wipe all data but nothing is worked, did you find a way??
Click to expand...
Click to collapse

I have the same problem
apply_patch_check ("/ system / build.prop")
Is there any solution?

rutenio3 said:
I have the same problem
apply_patch_check ("/ system / build.prop")
Is there any solution?
Click to expand...
Click to collapse
up

rutenio3 said:
I have the same problem
apply_patch_check ("/ system / build.prop")
Is there any solution?
Click to expand...
Click to collapse
There is a non so straight forward way to get it though by editing the "updater-script" file in the [ROMFileName].zip
You will need to unzip, edit the file (remove the line) with notepad and zip it back.
I've able to make it works with P6's MIUI V5 Offline OTA update rom.

extrem23 said:
There is a non so straight forward way to get it though by editing the "updater-script" file in the [ROMFileName].zip
You will need to unzip, edit the file (remove the line) with notepad and zip it back.
I've able to make it works with P6's MIUI V5 Offline OTA update rom.
Click to expand...
Click to collapse
I need more information.
Is very little information as to touch something random change.
A minitutorial would be nice.
thanks

i have the same problem
rutenio3 said:
I need more information.
Is very little information as to touch something random change.
A minitutorial would be nice.
thanks
Click to expand...
Click to collapse
assert faild: apply_patch_check("/system/app/MyBitCast.apk". "7e89b40472e4fe3d1459fb19f02b2901f281cea9".
"01c881b5cd2aad035329684eddd0471644914bb2")
update.zip is not correct

Format Sdcard And Try Again. If It Didnt Work Download Latest B125 And Try Again Hope This Works.

Please supply more info about this fix.
extrem23 said:
There is a non so straight forward way to get it though by editing the "updater-script" file in the [ROMFileName].zip
You will need to unzip, edit the file (remove the line) with notepad and zip it back.
I've able to make it works with P6's MIUI V5 Offline OTA update rom.
Click to expand...
Click to collapse
Please explain: what line should be erased from this file?
Thanks

rainbringer said:
Please explain: what line should be erased from this file?
Thanks
Click to expand...
Click to collapse
Yes please explain a little further. I am having update issues as well.
My Huuawei Ascend Mate MT1-U06 Found an OTA Update HwOUC, I downloaded it, and when I try to apply the update it fails.

[Q&A][UNOFFICIAL] CyanogenMod 12 Nightlies

Q&A for [ROM][UNOFFICIAL] CyanogenMod 12 Nightlies
FAQ:
Q: I tried to flash the ROM and got this:
Code:
Installing update...
set_metadata_recursive: some changes failed
E:Error in /sdcard/..path od ROM.zip
(Status 7)
Installation aborted.
Or I'm having other recovery issues.
A: Update your recovery to supported one. See the list below.
TWRP 2.8.1.2 ACE or newer
Q: I've used HTC Dev unlock and flashed the rom but it won't boot. What should I do?
A: You need to extract boot.img from the zip and flash it via fastboot. If you don't have fastboot executable anymore from flashing recovery, install Android SDK platform tools (Linux users should find it from distro's package management) and then reboot to bootloader, open command prompt and navigate to the location you extracted your boot.img and type:
Code:
fastboot flash boot boot.img
You need to repeat this everytime you flash new version of this rom to ensure everything will work fluently as long as you have just basic HTC Dev unlock.
Q: Where are my developer and performance options?
A: http://goo.gl/jpS8r
Q: Where is my root?
A: http://www.cyanogenmod.org/blog/all-about-l-part-2 (Read under "Superuser where?")
Q: Feature X doesn't work, let's make 1000 posts about it to annoy everyone.
A: Please, dont. Use search and then use search again and only then report your problem with necessary logs. [Logcat guide, thanks to MusikMonk for the link]
Q: I hate you for not fixing this issue X!!!
A: I love you too.
Q: How I can build CM12.0 myself?
A: Setup a basic Android build environment.
Code:
mkdir cm12
cd cm12/
repo init -u git://github.com/CyanogenMod/android.git -b cm-12.0
mkdir -p .repo/local_manifests
wget https://github.com/OpenDesireProject/android/raw/cm-12.0/local_manifest.xml -O .repo/local_manifests/cm_ace.xml
repo sync
. build/envsetup.sh
lunch cm_ace-userdebug
mka bacon
Once the build finishes you'll find your goods from out/target/product/ace/ directory.
Q: Something about something something something.
A: Ask the guy/gal next to you.

Thanks..reserved?
Sent from my ATRIX HD using Tapatalk

Home button not working. Have to use back button

Camera Bug
Camera is in the Apps not listen and it dont work from Lockscreen.
Sorry for my English and a big Thanks from Germany / EinfachAleks

No sounds.
---------- Post added at 11:32 AM ---------- Previous post was at 11:14 AM ----------
I don't have camera at all
Sent from my Desire HD using Tapatalk

Great job Tested on my Inspire 4G with alpha gaps all - so all works good but one problem at startup setting after ten minutus of thinking it cant set up my GSM career and tell me to set up it next time I'll think okay wait when all google sutups done ..... go to setting /mobile wireless/operator settings ... and at this moment I have a crash. I hawe an Ukrainian operator maybe this thing cause such problem Thank you a lot for you futer job at this rom And WiFi works greate ))))

For me the Home Key just working fine...im waiting for the next Snapshot

I'm gonna download zip again and flash again. Maybe bad flash.

Doge2 and recovery
Doge2 Installation doesn't work with 4EXT Recovery Touch v1.0.0.6 RC 3.
ApplyParsedPerms: lsetfilecon of /system/lost+found to ubject_r:system_file:s0 failed: Operation not supported on transport endpoint
script aborted: set_metadata_recursive: some changes failed
set_metadata_recursive: some changes failed
E:Error in /sdcard/ROM CM12/cm-12-20141130-UNOFFICIAL-DOGE2-ace.zip
(Status 7)
Installation aborted.
With TWRP 2.8.1.0 it installs but these TKruzze gapps (https://s.basketbuild.com/devs/TKruzze/Android 5.0 GApps/Micro-Modular GApps/) gives error
E: Error executing update binary zip "gapps location.zip"
INSTALLATION FAILURE: Your device does not have sufficient space available in
the system partition to install this GApps package as currently configured.
You will need to switch to a smaller GApps package or use gapps-config to
reduce the installed size.
Finnaly old bug for me.
Does anyone have same problem like I do? I can't make partitions with TWRP 2.8.1.0 partition editor! With 4ext recovey I can make partition but with TWRP I can't.
http://forum.xda-developers.com/htc-desire-hd/help/qa-twrp-2-8-1-0-cwm-6-0-5-1-unofficial-t2952947

first i want to thank you for this amazing rom
and i want to ask if i update from doge 1 to doge 2 should i flash boot.img again after installing the rom

marek287 said:
Doge2 Installation doesn't work with 4EXT Recovery Touch v1.0.0.6 RC 3.
ApplyParsedPerms: lsetfilecon of /system/lost+found to ubject_r:system_file:s0 failed: Operation not supported on transport endpoint
script aborted: set_metadata_recursive: some changes failed
set_metadata_recursive: some changes failed
E:Error in /sdcard/ROM CM12/cm-12-20141130-UNOFFICIAL-DOGE2-ace.zip
(Status 7)
Installation aborted.
http://forum.xda-developers.com/htc-desire-hd/help/qa-twrp-2-8-1-0-cwm-6-0-5-1-unofficial-t2952947
Click to expand...
Click to collapse
I have the same error

marek287 said:
Doge2 Installation doesn't work with 4EXT Recovery Touch v1.0.0.6 RC 3.
ApplyParsedPerms: lsetfilecon of /system/lost+found to ubject_r:system_file:s0 failed: Operation not supported on transport endpoint
script aborted: set_metadata_recursive: some changes failed
set_metadata_recursive: some changes failed
E:Error in /sdcard/ROM CM12/cm-12-20141130-UNOFFICIAL-DOGE2-ace.zip
(Status 7)
Installation aborted.
Click to expand...
Click to collapse
Try to format your system partition manually. If that doesn't help, contact 4EXT dev. Generally I can't fix recovery related issues like this seems to be.
marek287 said:
With TWRP 2.8.1.0 it installs but these TKruzze gapps (https://s.basketbuild.com/devs/TKruzze/Android 5.0 GApps/Micro-Modular GApps/) gives error
E: Error executing update binary zip "gapps location.zip"
INSTALLATION FAILURE: Your device does not have sufficient space available in
the system partition to install this GApps package as currently configured.
You will need to switch to a smaller GApps package or use gapps-config to
reduce the installed size.
Click to expand...
Click to collapse
You'll probably need even smaller gapps. Our system partition is getting very small as the base system size has increased a lot since gingerbread. I haven't tried any gapps yet as they are irrelevant to our roadblocker issues so I can't give any recommendations.
desire hd user said:
first i want to thank you for this amazing rom
and i want to ask if i update from doge 1 to doge 2 should i flash boot.img again after installing the rom
Click to expand...
Click to collapse
Yes, if you are S-ON. There are some kernel related changes which are included in the boot.img so it needs to be updated too.

Mustaavalkosta said:
Try to format your system partition manually. If that doesn't help, contact 4EXT dev. Generally I can't fix recovery related issues like this seems to be.
Click to expand...
Click to collapse
That was mine second throught but main goal was to anounce others that problem. I posted it to 4EXT recovery Q/A threat
http://forum.xda-developers.com/showpost.php?p=57171180&postcount=2
and recontacted (PM) to jrior001 TWRP recovery partition bug.

rom not working
help me. Excuse, but apparently I'm the only one that failed to install the rom.
during installation sticking a message like warnig and then something about the sound and would not start more
I've already checked MD5

DOGE2 + PA GApps ALPHA1 flash succeeded
Thank you Musta and the team for great job!
http://forum.xda-developers.com/showthread.php?p=56560109
I flashed DOGE2 + PA GApps ALPHA1, and they work fine.
(cm-12-20141130-UNOFFICIAL-DOGE2-ace.zip + pa_gapps-micro-5.0-ALPHA1-20141117a-signed.zip)
Before flashing, I made .gapps-config which containing the text "NanoGApps", and placed it in the same folder as the GApps zip.
Then, flashing has succeeded.
I didn't try "PicoGApps" option, but it will also succeed, I suppose.

matbeta said:
help me. Excuse, but apparently I'm the only one that failed to install the rom.
during installation sticking a message like warnig and then something about the sound and would not start more
I've already checked MD5
Click to expand...
Click to collapse
Install TWRP 2.8.1.0 then install the rom again. http://forum.xda-developers.com/showthread.php?t=2780164

After downloading writes: "sim card added restart your device".

bratmarat said:
After downloading writes: "sim card added restart your device".
Click to expand...
Click to collapse
Yeah, it's a bit wonky. Just hit back to skip it for now. Telephony code is still undergoing some changes.

Very good job. I wait for doge3

hello Mustaavalkosta, Great job, say thanks to you and all the dev team.
I am chinese user, i found doge 3 always crash when i install most common app.
such as baidunews, baidu market, zhihu
please check it, hope doge 4 coming as soon as possible.

{LineageOS 14.1} Update failing

I am running lineageos-nightly-20170706 on my OnePlus 3 - I've tried to update it using both lineageos-nightly-20170803 and lineageos-nightly-20170810 - both give the same error when TWRP tries to install the file:
assert failed: op3.verify_modem('2017-06-27 21:43:31== "1"
updater process ended with ERROR: 7
Error installing zip file '/data/data/org.lineageos.updater/app_updates/lineage-14.1-20170810-nightly-oneplus3-signed.zip'
I did a full wipe and flash installing this, but I don't want to lose all the config work I've done if I don't have to - so I wanted to try updating this time. Am I doing something wrong or missing something? I download it, then choose Install - it reboots the pphone to TWRP (3.0.4-1), I click Install, then Up a Level so I can find the file in /data/data/org.lineagos.updater/app_updates, select the zip file, and swipe to install it.
Thanks,
Brian

bwgreen9 said:
I am running lineageos-nightly-20170706 on my OnePlus 3 - I've tried to update it using both lineageos-nightly-20170803 and lineageos-nightly-20170810 - both give the same error when TWRP tries to install the file:
assert failed: op3.verify_modem('2017-06-27 21:43:31== "1"
updater process ended with ERROR: 7
Error installing zip file '/data/data/org.lineageos.updater/app_updates/lineage-14.1-20170810-nightly-oneplus3-signed.zip'
I did a full wipe and flash installing this, but I don't want to lose all the config work I've done if I don't have to - so I wanted to try updating this time. Am I doing something wrong or missing something? I download it, then choose Install - it reboots the pphone to TWRP (3.0.4-1), I click Install, then Up a Level so I can find the file in /data/data/org.lineagos.updater/app_updates, select the zip file, and swipe to install it.
Thanks,
Brian
Click to expand...
Click to collapse
Firmware...

I am not an android expert - what do I need, and how do I apply it?

bwgreen9 said:
I am not an android expert - what do I need, and how do I apply it?
Click to expand...
Click to collapse
Well, your firmware is outdated, you need to update it.
This should help you out:
http://lmgtfy.com/?iie=1&q=Oneplus+3+modem+firmware+xda

bwgreen9 said:
I am not an android expert - what do I need, and how do I apply it?
Click to expand...
Click to collapse
https://forum.xda-developers.com/oneplus-3/how-to/radio-modem-collection-flashable-zips-t3468628
I flashed this one in recovery 4.1.6 Firmware + Modem, and then i flashed the full zip of the lineage update.