Hi,
I'm having problems to install cm7 port. First of all, i would like to thanks Alquez by the great job he's done in this port.
And now, my problem. When i try to install cm7 from recovery, and after wipe data, cache and all, i select install from zip, and when start the proces i obtain this error message:
I've checked the zip md5sum, and i don't obtain the same result indicated by Alquez. I tried downloading the file several times, even downloading it from the different available servers, and I always get the same md5, being different to that indicated by Alquez.
I don't know what to do. Can anyone, that have the correct file, upload it to another server?. Or i'm doing anything wrong?
Thank you very much.
the error message
Sorry,
The error message is:
Installing update.....
assert failed: getprop("ro.product.device")=="marvel" ||getprop("ro.build.product")=="marvel" || getprop(ro.product.board") =="marvel"
E: Error in /sdcard..../update-cm-7.2.0.RC0....zip (Status 7)
What version of CWM do you use? Make sure you are using the version that alquez posted on development section
Sent from my A953
The md5sum of the current version (2011-12-16) doesn't match.
$ md5sum -c update-cm-7.2.0-RC0-marvel-KANG-signed.zip.md5
update-cm-7.2.0-RC0-marvel-KANG-signed.zip: FAILED
md5sum: WARNING: 1 computed checksum did NOT match
I'm using CWM version 3.2.0.1_xda.cn.
I'll try to install ClockworkMod Recovery v.5.0.2.6 and i'll try to flash CM7 port again.
Thanks for replies. I'll post the results of this try.
Problem solved
OK,
Finally I've could install CM7 on my wildfire s. The problem was at the CWM i was using.
I've installed the new version (5.0...) and the problem was solved.
Thank you all.
Sorry if my english is not very good.
Related
Hi!
Every time I try to flash a rom through CWM it gives me this "E:Can't open sdcard/rom.zip (bad)" error. I thought it's because of a corrupt download, but I downloaded it again and again, and it still ain't working. I also tried different roms and zips, but always the same error.
I formatted my SD card. I actually did it three times. Still no luck.
I hope someone can help. Thanks.
ArmorD said:
Hi!
Every time I try to flash a rom through CWM it gives me this "E:Can't open sdcard/rom.zip (bad)" error. I thought it's because of a corrupt download, but I downloaded it again and again, and it still ain't working. I also tried different roms and zips, but always the same error.
I formatted my SD card. I actually did it three times. Still no luck.
I hope someone can help. Thanks.
Click to expand...
Click to collapse
i have found that "bad" generaly means a problem with the zip. what have you been trying to flash?
Pvy.
I hope it was the problem. But I have tried downloading the same file a couple of times and tried different zip files, but none of 'em works. Also I can't install zips through Rom Manager.
Ugh, now what it does is when I go to flash a zip file, it just stucks into the "Opening update package"... It does it on every rom I try to install, even with matching kernels...
ArmorD said:
Ugh, now what it does is when I go to flash a zip file, it just stucks into the "Opening update package"... It does it on every rom I try to install, even with matching kernels...
Click to expand...
Click to collapse
can you show me the zips also have you got a diff SDcard to try?
Pvy.
pvyParts said:
can you show me the zips also have you got a diff SDcard to try?
Pvy.
Click to expand...
Click to collapse
Unfortunately I have no spare card anymore...
I tried
http://forum.xda-developers.com/showthread.php?t=1515148
http://forum.xda-developers.com/showthread.php?t=1537717
http://forum.xda-developers.com/showthread.php?t=1308849
roms.
Great, now I can't even flash CM9 anymore. I think I've made helluva expensive book weight.
Did you format it with windows or via cwm?
sinkster said:
Did you format it with windows or via cwm?
Click to expand...
Click to collapse
I don't use Windows, but I formatted it with Ubuntu. And yes, I also formatted it with CWM(which wasn't a good idea)
Okay, now when I try to flash CM9 Nightly, I got this:
Code:
Installing update...
assert failed: getprop("ro.product.device") ==
"| | getprop(ro.product.device") == "LT18i"
a" assert failed: getprop("ro.product.device") ==
"| | getprop(ro.product.device") == "LT18i"
a" getprop("ro.product.device") == "LT15i" || getprop("ro.product.device) == "LT15a"
E:error in /sdcard/update-cm-9-20120404-NIGHTLY-anzu-signed.zip
[B](Status 7)[/B]
Installion aborted.
Geez...
Any way to restore phone to complete stock? I could start from a clean table...
Allright, got that one fixed. Just needed to erase "getprop" lines from roms updater-script.
Now my phone isn't a brick anymore Able to boot it to CM9. Still, can't flash any roms...
It's alive!
I don't know what I did exactly to get it work, but I think formatting SD card via CWM had something to do with it...
(and sorry for double posts)
Maybe you have formatted in nfts instead of fat32..
Sent from my LT18i using XDA Premium App
Anyone who knows a solution to this? It just appeared on my CWM screen as well out of nowhere. Didn't do anything in MGLDR menu for weeks but it just happened?
fixcho
I want to install custom rom but it shows me that error. Before 1 weak i install cm7 and naw i am with it. Naw i try to install megatron but error then i try void but again error I am with lg p500.
HI
Sorry if i am in the wrong section to post. If I am, please move to a more convenient group.
I made a custom Rom in the android kitchen. Everything went through well, no problems at all. then when I try to install to my phone, it wont install and I get these errors:
One error I got while installing was: Installation Abored: Status 6.
Now I get this error white installing: E:Cant open /sdcard/primou_signed_031613_094637.zip (bad) Installation aborted.
Whats going on because I havent changed/converted any update scripts just added an apk then zip aligned it. The original roms install ok, but my own dont install when everything is set the same.
please help me. THANKS
I can upload my two custom roms for you to have a look to see if you can make sense of it. it is for HTC ONE V gsm.
Just try to unzip it and zip it again using WinRAR or 7Zip
Hi all,
I'm trying to replace the font on bubor's CM11 ROM by means of flashing one on of the ZIPs available at http://forum.xda-developers.com/goo...-fontster-betas-flashable-font-packs-t2513985
I am using bubor's TWRP v2.7.1.
The problem I first encountered when trying to flash a font was the error message "Error executing updater binary" and thus the flashing "Failed". Based on the advice at http://forum.xda-developers.com/showthread.php?t=2290009 , I figured it would probably be a good idea to replace the update-binary with the one found in my ROM's ZIP, so I did that.
However, the ZIP still doesn't flash. Although I no longer get the "Error executing updater binary" message, now TWRP simply tells me "Error flashing zip" without offering me any explanation.
Please can you help with this, and apologies for the noob question. I have tried installing the ZIP from both internal and external SD. My SD's are swapped - could that have something to do with it?
- downlaoded http://www.mediafire.com/download/40x5qm44a24p0dg/CantarellFontPack.zip
- downlaoded http://dualhoki.vim.hu/bubor/dev/keyboard-light.zip
- replace update-binary ( copy from keyboard-light.zip)
- install
no error.
Would you be more detailed what did you use with what, please.
bubor said:
- downlaoded /CantarellFontPack.zip
- downlaoded keyboard-light.zip
- replace update-binary ( copy from keyboard-light.zip)
- install
no error.
Would you be more detailed what did you use with what, please.
Click to expand...
Click to collapse
I'm sorry for not being detailed enough.
I tried following your steps but unfortunately the flashing still failed. I eventually got it to work after a combination of actions, but I think the most crucial one was changing the write permissions of the \system\fonts folder from "drwxr-xr-x" to "drwxrwxrwx".
Thanks for your efforts in any case, I really appreciate all the work you're doing.
Hi,
i have install TWRP v2.8.0.0. I have several zip file install. Durin the Installation i see the following error messages. For example, I installed the following file over the TWRP Install Button.
Code:
quantal-preinstalled-phablet-armhf.zip
and
Code:
quantal-preinstalled-armel+manta.zip
Code:
Updating partition details...
E:error opening '/data/ubuntu/dev/rmai11'
E:error: Not a directory
E:error opening !/data/ubuntu/dev/ram9'
E:error: Not a directory
. . .
I have no answer to the error messages.
Can you help me?
Advance many thanks for your support.
Love greeting of
Stefan Harbich
Hello everyone,
shame that still nobody has reported. I have indeed managed to install TWRP v.2.8.0.0, but I have the Android OS 4.2.2 somehow uninstalled when the wipe command. Now I have no OS on my tablet. Well, all for over a week. I just tested a Flash Boot ZIP file to the Android version 4.2.2 Least again, to be able to install on TWRP. Different ZIP's from the XDA developers could not be installed. Either because the zip could not be installed or the possible Ubuntu Toch Version.
I would be very happy if one of you could adopt my problem, because I have not been as conscientiously as you.
Advance for your support and warm Dankf
Kind regards Stefan Harbich
I have the same problem. I've tried to install Ubuntu on Samsung S3 and now in TWRP - whatever I do (install, backup..) - these errors accur
Btw, everything works, but there are about 30 lines of errors like this about missing directories.
Any ideas?
Q&A for [ROM][UNOFFICIAL] CyanogenMod 12 Nightlies
FAQ:
Q: I tried to flash the ROM and got this:
Code:
Installing update...
set_metadata_recursive: some changes failed
E:Error in /sdcard/..path od ROM.zip
(Status 7)
Installation aborted.
Or I'm having other recovery issues.
A: Update your recovery to supported one. See the list below.
TWRP 2.8.1.2 ACE or newer
Q: I've used HTC Dev unlock and flashed the rom but it won't boot. What should I do?
A: You need to extract boot.img from the zip and flash it via fastboot. If you don't have fastboot executable anymore from flashing recovery, install Android SDK platform tools (Linux users should find it from distro's package management) and then reboot to bootloader, open command prompt and navigate to the location you extracted your boot.img and type:
Code:
fastboot flash boot boot.img
You need to repeat this everytime you flash new version of this rom to ensure everything will work fluently as long as you have just basic HTC Dev unlock.
Q: Where are my developer and performance options?
A: http://goo.gl/jpS8r
Q: Where is my root?
A: http://www.cyanogenmod.org/blog/all-about-l-part-2 (Read under "Superuser where?")
Q: Feature X doesn't work, let's make 1000 posts about it to annoy everyone.
A: Please, dont. Use search and then use search again and only then report your problem with necessary logs. [Logcat guide, thanks to MusikMonk for the link]
Q: I hate you for not fixing this issue X!!!
A: I love you too.
Q: How I can build CM12.0 myself?
A: Setup a basic Android build environment.
Code:
mkdir cm12
cd cm12/
repo init -u git://github.com/CyanogenMod/android.git -b cm-12.0
mkdir -p .repo/local_manifests
wget https://github.com/OpenDesireProject/android/raw/cm-12.0/local_manifest.xml -O .repo/local_manifests/cm_ace.xml
repo sync
. build/envsetup.sh
lunch cm_ace-userdebug
mka bacon
Once the build finishes you'll find your goods from out/target/product/ace/ directory.
Q: Something about something something something.
A: Ask the guy/gal next to you.
Thanks..reserved?
Sent from my ATRIX HD using Tapatalk
Home button not working. Have to use back button
Camera Bug
Camera is in the Apps not listen and it dont work from Lockscreen.
Sorry for my English and a big Thanks from Germany / EinfachAleks
No sounds.
---------- Post added at 11:32 AM ---------- Previous post was at 11:14 AM ----------
I don't have camera at all
Sent from my Desire HD using Tapatalk
Great job Tested on my Inspire 4G with alpha gaps all - so all works good but one problem at startup setting after ten minutus of thinking it cant set up my GSM career and tell me to set up it next time I'll think okay wait when all google sutups done ..... go to setting /mobile wireless/operator settings ... and at this moment I have a crash. I hawe an Ukrainian operator maybe this thing cause such problem Thank you a lot for you futer job at this rom And WiFi works greate ))))
For me the Home Key just working fine...im waiting for the next Snapshot
I'm gonna download zip again and flash again. Maybe bad flash.
Doge2 and recovery
Doge2 Installation doesn't work with 4EXT Recovery Touch v1.0.0.6 RC 3.
ApplyParsedPerms: lsetfilecon of /system/lost+found to ubject_r:system_file:s0 failed: Operation not supported on transport endpoint
script aborted: set_metadata_recursive: some changes failed
set_metadata_recursive: some changes failed
E:Error in /sdcard/ROM CM12/cm-12-20141130-UNOFFICIAL-DOGE2-ace.zip
(Status 7)
Installation aborted.
With TWRP 2.8.1.0 it installs but these TKruzze gapps (https://s.basketbuild.com/devs/TKruzze/Android 5.0 GApps/Micro-Modular GApps/) gives error
E: Error executing update binary zip "gapps location.zip"
INSTALLATION FAILURE: Your device does not have sufficient space available in
the system partition to install this GApps package as currently configured.
You will need to switch to a smaller GApps package or use gapps-config to
reduce the installed size.
Finnaly old bug for me.
Does anyone have same problem like I do? I can't make partitions with TWRP 2.8.1.0 partition editor! With 4ext recovey I can make partition but with TWRP I can't.
http://forum.xda-developers.com/htc-desire-hd/help/qa-twrp-2-8-1-0-cwm-6-0-5-1-unofficial-t2952947
first i want to thank you for this amazing rom
and i want to ask if i update from doge 1 to doge 2 should i flash boot.img again after installing the rom
marek287 said:
Doge2 Installation doesn't work with 4EXT Recovery Touch v1.0.0.6 RC 3.
ApplyParsedPerms: lsetfilecon of /system/lost+found to ubject_r:system_file:s0 failed: Operation not supported on transport endpoint
script aborted: set_metadata_recursive: some changes failed
set_metadata_recursive: some changes failed
E:Error in /sdcard/ROM CM12/cm-12-20141130-UNOFFICIAL-DOGE2-ace.zip
(Status 7)
Installation aborted.
http://forum.xda-developers.com/htc-desire-hd/help/qa-twrp-2-8-1-0-cwm-6-0-5-1-unofficial-t2952947
Click to expand...
Click to collapse
I have the same error
marek287 said:
Doge2 Installation doesn't work with 4EXT Recovery Touch v1.0.0.6 RC 3.
ApplyParsedPerms: lsetfilecon of /system/lost+found to ubject_r:system_file:s0 failed: Operation not supported on transport endpoint
script aborted: set_metadata_recursive: some changes failed
set_metadata_recursive: some changes failed
E:Error in /sdcard/ROM CM12/cm-12-20141130-UNOFFICIAL-DOGE2-ace.zip
(Status 7)
Installation aborted.
Click to expand...
Click to collapse
Try to format your system partition manually. If that doesn't help, contact 4EXT dev. Generally I can't fix recovery related issues like this seems to be.
marek287 said:
With TWRP 2.8.1.0 it installs but these TKruzze gapps (https://s.basketbuild.com/devs/TKruzze/Android 5.0 GApps/Micro-Modular GApps/) gives error
E: Error executing update binary zip "gapps location.zip"
INSTALLATION FAILURE: Your device does not have sufficient space available in
the system partition to install this GApps package as currently configured.
You will need to switch to a smaller GApps package or use gapps-config to
reduce the installed size.
Click to expand...
Click to collapse
You'll probably need even smaller gapps. Our system partition is getting very small as the base system size has increased a lot since gingerbread. I haven't tried any gapps yet as they are irrelevant to our roadblocker issues so I can't give any recommendations.
desire hd user said:
first i want to thank you for this amazing rom
and i want to ask if i update from doge 1 to doge 2 should i flash boot.img again after installing the rom
Click to expand...
Click to collapse
Yes, if you are S-ON. There are some kernel related changes which are included in the boot.img so it needs to be updated too.
Mustaavalkosta said:
Try to format your system partition manually. If that doesn't help, contact 4EXT dev. Generally I can't fix recovery related issues like this seems to be.
Click to expand...
Click to collapse
That was mine second throught but main goal was to anounce others that problem. I posted it to 4EXT recovery Q/A threat
http://forum.xda-developers.com/showpost.php?p=57171180&postcount=2
and recontacted (PM) to jrior001 TWRP recovery partition bug.
rom not working
help me. Excuse, but apparently I'm the only one that failed to install the rom.
during installation sticking a message like warnig and then something about the sound and would not start more
I've already checked MD5
DOGE2 + PA GApps ALPHA1 flash succeeded
Thank you Musta and the team for great job!
http://forum.xda-developers.com/showthread.php?p=56560109
I flashed DOGE2 + PA GApps ALPHA1, and they work fine.
(cm-12-20141130-UNOFFICIAL-DOGE2-ace.zip + pa_gapps-micro-5.0-ALPHA1-20141117a-signed.zip)
Before flashing, I made .gapps-config which containing the text "NanoGApps", and placed it in the same folder as the GApps zip.
Then, flashing has succeeded.
I didn't try "PicoGApps" option, but it will also succeed, I suppose.
matbeta said:
help me. Excuse, but apparently I'm the only one that failed to install the rom.
during installation sticking a message like warnig and then something about the sound and would not start more
I've already checked MD5
Click to expand...
Click to collapse
Install TWRP 2.8.1.0 then install the rom again. http://forum.xda-developers.com/showthread.php?t=2780164
After downloading writes: "sim card added restart your device".
bratmarat said:
After downloading writes: "sim card added restart your device".
Click to expand...
Click to collapse
Yeah, it's a bit wonky. Just hit back to skip it for now. Telephony code is still undergoing some changes.
Very good job. I wait for doge3
hello Mustaavalkosta, Great job, say thanks to you and all the dev team.
I am chinese user, i found doge 3 always crash when i install most common app.
such as baidunews, baidu market, zhihu
please check it, hope doge 4 coming as soon as possible.