Develop Bugs

[Q] Problems to install cm7

Hi,
I'm having problems to install cm7 port. First of all, i would like to thanks Alquez by the great job he's done in this port.
And now, my problem. When i try to install cm7 from recovery, and after wipe data, cache and all, i select install from zip, and when start the proces i obtain this error message:
I've checked the zip md5sum, and i don't obtain the same result indicated by Alquez. I tried downloading the file several times, even downloading it from the different available servers, and I always get the same md5, being different to that indicated by Alquez.
I don't know what to do. Can anyone, that have the correct file, upload it to another server?. Or i'm doing anything wrong?
Thank you very much.

the error message
Sorry,
The error message is:
Installing update.....
assert failed: getprop("ro.product.device")=="marvel" ||getprop("ro.build.product")=="marvel" || getprop(ro.product.board") =="marvel"
E: Error in /sdcard..../update-cm-7.2.0.RC0....zip (Status 7)

What version of CWM do you use? Make sure you are using the version that alquez posted on development section
Sent from my A953

The md5sum of the current version (2011-12-16) doesn't match.
$ md5sum -c update-cm-7.2.0-RC0-marvel-KANG-signed.zip.md5
update-cm-7.2.0-RC0-marvel-KANG-signed.zip: FAILED
md5sum: WARNING: 1 computed checksum did NOT match

I'm using CWM version 3.2.0.1_xda.cn.
I'll try to install ClockworkMod Recovery v.5.0.2.6 and i'll try to flash CM7 port again.
Thanks for replies. I'll post the results of this try.

Problem solved
OK,
Finally I've could install CM7 on my wildfire s. The problem was at the CWM i was using.
I've installed the new version (5.0...) and the problem was solved.
Thank you all.
Sorry if my english is not very good.

Can't install any custom ROM on SU640

Hey all!
I have Korean LG SU640. When trying to install any rom, e.g. CM9, 9.1, 10, i have the same error:
assert failed: getprop ("ro.product.device") =="su640" ll getprop ("ro.build.product") == "su640"
E: Error in/sdcard/cm-9.0.0-su640.zip
(status 7)
Installation aborted.
As I found, this error appears when you're trying to install rom from another device
Installation of ROMs from P930 goes ok, but wifi doen'ts works and screen oriebtation is wrong.
Tried to flash CWM for SU640 from here, but this didn't help.
Solution I found is to put into SU640 rom META-INF and system\build.prop from P930. Rom installed successfully and everything works.
However, making this manipulation for each update is quite annoying.
Does anybody knows how to make my phone 'think' he is SU640, not P930?

chukerer said:
Hey all!
I have Korean LG SU640. When trying to install any rom, e.g. CM9, 9.1, 10, i have the same error:
assert failed: getprop ("ro.product.device") =="su640" ll getprop ("ro.build.product") == "su640"
E: Error in/sdcard/cm-9.0.0-su640.zip
(status 7)
Installation aborted.
As I found, this error appears when you're trying to install rom from another device
Installation of ROMs from P930 goes ok, but wifi doen'ts works and screen oriebtation is wrong.
Tried to flash CWM for SU640 from here, but this didn't help.
Solution I found is to put into SU640 rom META-INF and system\build.prop from P930. Rom installed successfully and everything works.
However, making this manipulation for each update is quite annoying.
Does anybody knows how to make my phone 'think' he is SU640, not P930?
Click to expand...
Click to collapse
All you need to do is go to CWM, select "Install zip from sdcard", then select "toggle script asserts" (so that the setting is disabled).

drumist said:
All you need to do is go to CWM, select "Install zip from sdcard", then select "toggle script asserts" (so that the setting is disabled).
Click to expand...
Click to collapse
Doesn't help. The same error

chukerer said:
Doesn't help. The same error
Click to expand...
Click to collapse
Solution found!
Download the latest recovery for LG Optimus LTE from http://www.clockworkmod.com/rommanager/.
Flash it with Android Terminal Emulator how it was described here
Reboot into recovery and install any rom for SU640.
The only problem is that Rom Manager still wants to flash recovery for P930

chukerer said:
Hey all!
I have Korean LG SU640. When trying to install any rom, e.g. CM9, 9.1, 10, i have the same error:
assert failed: getprop ("ro.product.device") =="su640" ll getprop ("ro.build.product") == "su640"
E: Error in/sdcard/cm-9.0.0-su640.zip
(status 7)
Installation aborted.
As I found, this error appears when you're trying to install rom from another device
Installation of ROMs from P930 goes ok, but wifi doen'ts works and screen oriebtation is wrong.
Tried to flash CWM for SU640 from here, but this didn't help.
Solution I found is to put into SU640 rom META-INF and system\build.prop from P930. Rom installed successfully and everything works.
However, making this manipulation for each update is quite annoying.
Does anybody knows how to make my phone 'think' he is SU640, not P930?
Click to expand...
Click to collapse
It's really easy. what you need to is delete(
"ro.product.device") =="su640" ll getprop ("ro.build.product") == "su640")of META-INF then pack and sign zip,this will work well.
Sent from my LG-SU640 using xda premium

flash recovery 6.0.1.2
Sent from my LG-SU640 using xda app-developers app

HELP!!!!!!
pxrphj said:
flash recovery 6.0.1.2
Sent from my LG-SU640 using xda app-developers app
Click to expand...
Click to collapse
I just flashed recovery 6.0.1.2 but it still error. I want to try flashing rom by deleting ("ro.product.device") =="su640" ll getprop ("ro.build.product") == "su640") of META-INF, but I don't know how to do. Could you please help me? I want to flash custom rom.

Used to have this problem... but it was solved when I flashed cwm 6.0.1.4
http://me.zing.vn/apps/sharefile?params=/download/downloadfile/file/NzEzMys2NjAyMzkzMQ==
Sent from my LG-SU640

navik said:
It's really easy. what you need to is delete(
"ro.product.device") =="su640" ll getprop ("ro.build.product") == "su640")of META-INF then pack and sign zip,this will work well.
Sent from my LG-SU640 using xda premium
Click to expand...
Click to collapse
Please can you tell me how to delete ("ro.product.device") =="su640" ll getprop ("ro.build.product") == "su640")of META-INF

Some ROMs will give an error: "assert failed getprop(ro.product.device==SU640)" or something like that.
Open that ROM using Winrar, go to "META-INF\com\google\android " and open the file named "updater-script" and remove the first line and save.
On closing the text editor, winrar will ask you if you want to replace the edited file, click "Yes" or "OK" . and flash the ROM again. This time, it will work.
Ref: http://wiredsoup.blogspot.com/2013/02/lg-optimus-su640-comfirmed-working.html

[RECOVERY][Unofficial] TeamWin Recovery Project - 2.8.4

TeamWin Recovery Project ​
Restore in the old 2.4.1 version doesnt work for me. I build from source, now it works, I share.
Download
http://dualhoki.vim.hu/bubor/dev/twrp-i927/
http://rpi.bubor.hu/bubor/dev/twrp-i927/
Current Issues:
display timeout blank screen disabled
Issue report:
Give everything I need to reproduce the problem (logs, guide, dumps etc), I wont reply useless reports.
Changelog:
Changelog can be found : http://www.teamw.in/project/twrp2
2.6.1 wipe data make smaller data partition, that need for encyption. Encypt mount support.
2.6.3 removed superuser, compiled with cm-10.2
2.6.3-2 add fuse, it should support extfat
2.6.3-3 remove encypt, puth superuser (Rooting)
2.6.3-4 put security fs, selinux, it will need for flash cm-11.0
2.6.3.1 update twrp from git (actually its 2.7.0, but you will see 2.6.3 in the corner)
2.7..1: update twrp, compiled with cm-10.2
2.8.4: compild with cm-11.0, fix MTP
Credit:
Terinfire(Source)
Dman(Source)
thegreatergood
TWRP TEAM
Install
Install zip from TWRP or ClockworkModRecovery
Put device to download mode ( power on, while hold volume up, hit volume up again when asked to do ), and use odin (included in the zip, browse to pda, dont flash other)
Changelog: http://www.teamw.in/project/twrp2
You may want to install older rom, you must change assert tag in rom zip file META-INF/com/google/android/updater-script:
Code:
assert(getprop("ro.product.device") == "i927" || getprop("ro.build.product") == "i927" ||
getprop("ro.product.device") == "SGH-I927" || getprop("ro.build.product") == "SGH-I927" ||
getprop("ro.product.device") == "SGH-I927R" || getprop("ro.build.product") == "SGH-I927R" ||
getprop("ro.product.device") == "SGHI927" || getprop("ro.build.product") == "SGHI927" ||
getprop("ro.product.device") == "SGHI927R" || getprop("ro.build.product") == "SGHI927R" ||
getprop("ro.product.device") == "n1" || getprop("ro.build.product") == "n1" || abort("This package is for \"i927,SGH-I927,SGH-I927R,SGHI927,SGHI927R,n1\" devices; this is a \"" + getprop("ro.product.device") + "\"."););

Awesome! Thanks so much for fixing this for Team Glide!
Sent from my Rooted Samsung SGH-i927 Captivate Glide
Running @ndroid JB4.2.2 CM10.1 & TWRP 2.4.4.0 using xda-dev app.

They just released a newer version 2.5.0.0
Sent from my Rooted Samsung SGH-i927 Captivate Glide
Running @ndroid JB4.2.2 & TWRP 2.4.4.0 using xda-dev app.

*thanks bubor for keeping twrp up to date.
*please keep twrp up to date since it can then use rom manager to do all the wipes, flash and install roms and gapps package an dother patches along he way.
*can the img extension just be use through adb to get that to the phone or not?
*how is this done and steps pleas?

dd if=recovery.img of=/dev/block/mmcblk0p8
You can find recovery.img inside the zip.

update to 2.6.1

Oh my...
I think this is one of the best finds for the Cappy Glide since CM10.1...
Thank you! Thanks SOOOOO MUCH!
I was about fed-up with CWMR, having to spam the volume buttons, but now with touch controls, I mean, COME ON! How much better could it get to flash and recover and restore and backup stuff! Thank you! BIG THUMBS UP!
:good::good::good::good::good:

great thanks, its time to udate it. i see we have a version from odin and one to flash via CWMR.

Initially got some strange "assert getprop" errors when flashing stock Samsung flashable packs (CWM does the job), but flashing CM and PAC looks alright. Just why does the stock flashables all require ro.product.device=SGHI927... (normally it would be SGH-I927)
Sent from Samsung Captivate Glide @ CM10.1.2

AndyYan said:
Initially got some strange "assert getprop" errors when flashing stock Samsung flashable packs (CWM does the job), but flashing CM and PAC looks alright. Just why does the stock flashables all require ro.product.device=SGHI927... (normally it would be SGH-I927)
Sent from Samsung Captivate Glide @ CM10.1.2
Click to expand...
Click to collapse
assert tag changed a year ago, old custom 4.0/4.1 doesnt work with newer recoveries.
New roms test both assert tags. You can change test in rom's zip file.

Well after upgrading to 2.6.3 I get fail to create directory & failed to backup? This is to either internal or external. On 2.6.1 I was getting fails to restore? Anyone else having these issues?
Sent from my Rooted Samsung SGH-i927 Captivate Glide Running Android ICS 4.0.4 LiteRom 0.9.0 & TWRP 2.6.3 using xda-dev app.

amppcguru said:
Well after upgrading to 2.6.3 I get fail to create directory & failed to backup? This is to either internal or external. On 2.6.1 I was getting fails to restore? Anyone else having these issues?
Sent from my Rooted Samsung SGH-i927 Captivate Glide Running Android ICS 4.0.4 LiteRom 0.9.0 & TWRP 2.6.3 using xda-dev app.
Click to expand...
Click to collapse
could you write detail? uploading /tmp/recovery.log helps lot.
I just made a backup and restore, and it works.

TWRP 2.6.3 bu failure
bubor said:
could you write detail? uploading /tmp/recovery.log helps lot.
I just made a backup and restore, and it works.
Click to expand...
Click to collapse
Hm I don't see a tmp folder in root or twrp. I did a search for all recovery.log files & only found the ones from 2.6.1 backups
I had to go back to 2.6.1 & got it to backup & restore.
I've attached one of those.
When trying using 2.6.3 it says it "Unable to create Folder: /external_sd/TWRP/..."
"Failed to make backup folder"
I am running TGG Literom 0.9.0

amppcguru said:
Hm I don't see a tmp folder in root or twrp. I did a search for all recovery.log files & only found the ones from 2.6.1 backups
I had to go back to 2.6.1 & got it to backup & restore.
I've attached one of those.
When trying using 2.6.3 it says it "Unable to create Folder: /external_sd/TWRP/..."
"Failed to make backup folder"
I am running TGG Literom 0.9.0
Click to expand...
Click to collapse
try to rename TWRP to TWRP2,and lets it creates new one.

2.6.3 backup unable to create folder
bubor said:
try to rename TWRP to TWRP2,and lets it creates new one.
Click to expand...
Click to collapse
I tried renaming them & reflashed 2.6.3 but still get the same error messages of it not being able to create backup folders? Very strange.... I could have sworn it was working the first time I flashed it? But now these repeated errors have me mystified?
Edit: I also tried redownloading 2.6.3 & reflashing but still getting the same error messages?
Ive had to reflash 2.6.1 & it works perfectly!

2.6.3
Doesn't seem capable of mounting 64gb exfat formatted SDXC card.
Just says failed to mount or something along those lines, mounted a 8gb FAT32 card, wouldn't mount an old FAT 512mb card.
I know for a fact the 2.6.1 is capable of mounting the 64gb exfat card. Flashed back to it and no issues.

amppcguru said:
I tried renaming them & reflashed 2.6.3 but still get the same error messages of it not being able to create backup folders? Very strange.... I could have sworn it was working the first time I flashed it? But now these repeated errors have me mystified?
Edit: I also tried redownloading 2.6.3 & reflashing but still getting the same error messages?
Ive had to reflash 2.6.1 & it works perfectly!
Click to expand...
Click to collapse
I had the same error, so i just downloaded nandroid backup from the play store, and it works wonders if you choose TWRP as your recovery.
Sent from my SGH-I927 using XDA Premium 4 mobile app

I also had the same problem, but with d2att - changed the auto generated backup name and it worked (also fixed permissions but not sure if it was necessary to or not).

bubor said:
assert tag changed a year ago, old custom 4.0/4.1 doesnt work with newer recoveries.
New roms test both assert tags. You can change test in rom's zip file.
Click to expand...
Click to collapse
Went to older recovery, still not able to flash.
WTF?
Sent from my SGHI927 using Tapatalk

Changing the auto-generated name fixed for me too.

[Q] B117 update - assert failed: apply_patch_check

Hi there,
for some time now I have been trying to update B116 to B117 getting the same error message every time:
View attachment 2311424
assert failed: apply_patch_check ("/system/app/HwCloudDrive.apk" ... )
E:Error in /sdcard/HwOUC/update.zip
(status 7)
I am guessing the update does not match the HwCloudDrive.apk (not sure, new to this). What have I tried:
1. Check the /system/app/HwCloudDrive.apk - not found in the folder, nor anywhere else on the phone. Searched the web, downloaded one apk, install failed for no reason (reason not stated, just that it failed)
2. Restoring factory settings several times
3. re-downloading many times
4. updating online as well as localy
So far nothing worked out. Some details about my phone:
Its P6-U06, android 4.2.2, baseband IMC1202_PENTA, kernel 3.0.8-00821, build B116SP01, bought in China, using New Zealand SIM (could this be a problem?)
Any help would be much appreciated
Thanks to all!

Same issue updating error
Hi! I'm stucked with the same problem, I have tried to update it from external, wipe all data but nothing is worked, did you find a way??
ouzoliny said:
Hi there,
for some time now I have been trying to update B116 to B117 getting the same error message every time:
View attachment 2311424
assert failed: apply_patch_check ("/system/app/HwCloudDrive.apk" ... )
E:Error in /sdcard/HwOUC/update.zip
(status 7)
I am guessing the update does not match the HwCloudDrive.apk (not sure, new to this). What have I tried:
1. Check the /system/app/HwCloudDrive.apk - not found in the folder, nor anywhere else on the phone. Searched the web, downloaded one apk, install failed for no reason (reason not stated, just that it failed)
2. Restoring factory settings several times
3. re-downloading many times
4. updating online as well as localy
So far nothing worked out. Some details about my phone:
Its P6-U06, android 4.2.2, baseband IMC1202_PENTA, kernel 3.0.8-00821, build B116SP01, bought in China, using New Zealand SIM (could this be a problem?)
Any help would be much appreciated
Thanks to all!
Click to expand...
Click to collapse

Hi there,
nope, I haven't found the way. I tried a few more time since the post, no change, still the same problem. I have posted the message on huawei support, no reply. I'm at the stage of no-trying anymore, waiting for the next update and see...
Mrpinkman said:
Hi! I'm stucked with the same problem, I have tried to update it from external, wipe all data but nothing is worked, did you find a way??
Click to expand...
Click to collapse

I have the same problem
apply_patch_check ("/ system / build.prop")
Is there any solution?

rutenio3 said:
I have the same problem
apply_patch_check ("/ system / build.prop")
Is there any solution?
Click to expand...
Click to collapse
up

rutenio3 said:
I have the same problem
apply_patch_check ("/ system / build.prop")
Is there any solution?
Click to expand...
Click to collapse
There is a non so straight forward way to get it though by editing the "updater-script" file in the [ROMFileName].zip
You will need to unzip, edit the file (remove the line) with notepad and zip it back.
I've able to make it works with P6's MIUI V5 Offline OTA update rom.

extrem23 said:
There is a non so straight forward way to get it though by editing the "updater-script" file in the [ROMFileName].zip
You will need to unzip, edit the file (remove the line) with notepad and zip it back.
I've able to make it works with P6's MIUI V5 Offline OTA update rom.
Click to expand...
Click to collapse
I need more information.
Is very little information as to touch something random change.
A minitutorial would be nice.
thanks

i have the same problem
rutenio3 said:
I need more information.
Is very little information as to touch something random change.
A minitutorial would be nice.
thanks
Click to expand...
Click to collapse
assert faild: apply_patch_check("/system/app/MyBitCast.apk". "7e89b40472e4fe3d1459fb19f02b2901f281cea9".
"01c881b5cd2aad035329684eddd0471644914bb2")
update.zip is not correct

Format Sdcard And Try Again. If It Didnt Work Download Latest B125 And Try Again Hope This Works.

Please supply more info about this fix.
extrem23 said:
There is a non so straight forward way to get it though by editing the "updater-script" file in the [ROMFileName].zip
You will need to unzip, edit the file (remove the line) with notepad and zip it back.
I've able to make it works with P6's MIUI V5 Offline OTA update rom.
Click to expand...
Click to collapse
Please explain: what line should be erased from this file?
Thanks

rainbringer said:
Please explain: what line should be erased from this file?
Thanks
Click to expand...
Click to collapse
Yes please explain a little further. I am having update issues as well.
My Huuawei Ascend Mate MT1-U06 Found an OTA Update HwOUC, I downloaded it, and when I try to apply the update it fails.

[Q] CM11 wont install - Status 7

Hi, I have been flashing nightlies since CM11 came out with no issues (maybe once a week, so quite a few times).. The version I currently have installed is 11-20140204. I have been just dirty flashing manually in CWM, installing from SD card / install ZIP.
For some reason I cannot update anymore ? Any of the new Nightly versions give me a STATUS 7 and to my knowledge nothing on my phone has changed ?
I have updated to the latest CWM - 6.0.4.7. and still wont work.
Here is the error I am getting :
Installing Update:
Assert failed:
getprop (“re.bootloader”) == “I747UCDMG2”
getprop (“re.bootloader”) == “I747UCUEMJ2”
getprop (“re.bootloader”) == “I747UCUEMJB”
getprop (“re.bootloader”) == “I747MVLDMF1”
getprop (“re.bootloader”) == “I747MVLUEMK5”
getprop (“re.bootloader”) == “I747MUMUEMK3”
E: Error in /data/media/0/cm-11-20140216-NIGHTLY-d2att.zip (STATUS 7)
Installation aborted.
Please help, Thanks

I was having the same problem and if you look around a little you can try editing the updater script.... There is a whole step by step tutorial somewhere in this forum. You have to unzip the ROM and edit the updater-script file but here is the link just copy and paste it, its a couple comments down and it has worked for a ton of people, I'm still having issues but its helped a ton of people to flash successfully.
http://forum.xda-developers.com/showthread.php?p=38880428

Is your bootloader included in the list of supported loaders?

Use TWRP instead.
Flash this, http://invisiblek.org/d2firmware.html
Format /cache, dalvik, /system, /data, and your internal SD card, then try again.
Sent from my SGH-I747 using Tapatalk

RJantu said:
Use TWRP instead.
Flash this, http://invisiblek.org/d2firmware.html
Format /cache, dalvik, /system, /data, and your internal SD card, then try again.
Sent from my SGH-I747 using Tapatalk
Click to expand...
Click to collapse
Won't formatting your internal SD card delete your nandroid backups if that's where your cwm stuff is? I'd like to find a solution for my issue to I have the new bootloader from 4.3 UCUEMJB and I successfully rooted it and installed philz cwm and removed Knox with the Knox remover zip and then I successfully flashed beanstalk 4.4.1 which I'm still running and with no issues......but I haven't been able to flash anything else.... So I was considering trying twrp because at first I was getting those errors then edited the updater scripts in the ROMs I was trying to flag just for it to abort installation again and not because of a status 7 error I think it said something about data/0 / volume or something crazy like that which is all foreign to me.