Hi i recently rooted and unlocked the bootloader on my htc one x and i flashed cyanogenmod 11 onto it. Once i flashed it, the phone entered a bootloop and i tried to flash the factory firmware onto it but when i use fastboot devices in android sdk the phone does not show up on the list and says "Waiting for device". Please help. Thanks
red1334 said:
Hi i recently rooted and unlocked the bootloader on my htc one x and i flashed cyanogenmod 11 onto it. Once i flashed it, the phone entered a bootloop and i tried to flash the factory firmware onto it but when i use fastboot devices in android sdk the phone does not show up on the list and says "Waiting for device". Please help. Thanks
Click to expand...
Click to collapse
flash the boot.img from CM11
Thant said:
flash the boot.img from CM11
Click to expand...
Click to collapse
Im trying to but my pc doesnt detect the phone so i cant flash anything through sdk
If your phone is in bootloader when you do fastboot devices, then the fault is likely with your windows drivers. Find the unknown or non working device in device manager and update driver to the Google drivers.
red1334 said:
Hi i recently rooted and unlocked the bootloader on my htc one x and i flashed cyanogenmod 11 onto it. Once i flashed it, the phone entered a bootloop and i tried to flash the factory firmware onto it but when i use fastboot devices in android sdk the phone does not show up on the list and says "Waiting for device". Please help. Thanks
Click to expand...
Click to collapse
Custom ROM's are written from the recovery partition, but the recovery has no acces to the boot partition. If you're comming from an older version of android, which is likely when you're trying to install CM11 from stock, you will also need to update your kernel in the boot partition. Kernels are flashed using fastboot. make sure your drivers are up to date like mentioned above and extract the boot.img from the CM11 zip. load into fastboot mode and flash the boot.img. Your phone should boot after this.
In its current state, your phone is trying to boot a KK ROM on a JB kernel, which is why it's stuck in a boot screen.
Related
i wanted to install cm 11 on my xperia arc but it said i have to flash a xperia arc s (lt 18i) ftf file so i flashed it after flashing it i returned to stock ics and superuser was gone also cwm recorvery was gone too after i plugged my phone to flash cmm 11 kernel it was not recognising my device and i don't even know if my device bootloader is unlocked anymore please help .
earlier i was on cm10
if you bothered to read you will lose superuser and recovery by flashing a stock ftf file, but your bootloader status remains.
and how do you try to flash the kernel? flashtool? command line?
tangosierra_ said:
if you bothered to read you will lose superuser and recovery by flashing a stock ftf file, but your bootloader status remains.
and how do you try to flash the kernel? flashtool? command line?
Click to expand...
Click to collapse
i tried to flash using command line
when you type in fastboot devices does your device show up/
no it shows nothing when i type fastboot devices
thank you very much for help but my problem solved after i installed cwm recovery now it is showing up in fastboot devices
dhruvkhatkar said:
i don't even know if my device bootloader is unlocked
Click to expand...
Click to collapse
Find it out, otherwise we can't help.
You say you used CM10. If you were able to use it properly and you didn't lock bootloader meanwhile, then it should still be unlocked.
Now, let's start from the beginning. Which OS is on your PC? Did you install fastboot drivers from Flashtool?
I unlocked bootloader and rooted my htc one v(gsm).I am currently on stock htc sense I want to install twrp so can i install it from goo manager i downloaded from play store??
Also I want cm10 rom so if I flashed it from twrp do i need to install kernel by going into fastboot mode and using cmd etc.??i saw a video tutorial in which they just installed rom from twrp and they didnt installed kernel but i have heard many users are not going past logo as they havent installed kernel...
mandarmane said:
I unlocked bootloader and rooted my htc one v(gsm).I am currently on stock htc sense I want to install twrp so can i install it from goo manager i downloaded from play store??
Also I want cm10 rom so if I flashed it from twrp do i need to install kernel by going into fastboot mode and using cmd etc.??i saw a video tutorial in which they just installed rom from twrp and they didnt installed kernel but i have heard many users are not going past logo as they havent installed kernel...
Click to expand...
Click to collapse
You will want to install your recovery using a cmd prompt. Our phone is S-on, so you may run into difficulty trying to use goo for a recovery installation. MAKE A BACKUP ONCE YOU GET TWRP INSTALLED!!!!
If you want cm10 you will need to get your twrp up and running first, download your desired cm10 zip to your computer, open archives using 7zip, copy the boot img from the rom zip to your working fastboot folder (assuming that you have fastboot set up since you got this far), open a cmd window and navigate to your fastboot folder using the command cd c:\yourfastbootfoldername.
Once your rom is installed, reboot to bootloader. Plug your phone into your pc, it should switch from fastboot to fastboot usb. Use the command fastboot flash boot boot.img. You should now be able to reboot your phone and enjoy cm10!
sellersj27 said:
You will want to install your recovery using a cmd prompt. Our phone is S-on, so you may run into difficulty trying to use goo for a recovery installation. MAKE A BACKUP ONCE YOU GET TWRP INSTALLED!!!!
If you want cm10 you will need to get your twrp up and running first, download your desired cm10 zip to your computer, open archives using 7zip, copy the boot img from the rom zip to your working fastboot folder (assuming that you have fastboot set up since you got this far), open a cmd window and navigate to your fastboot folder using the command cd c:\yourfastbootfoldername.
Once your rom is installed, reboot to bootloader. Plug your phone into your pc, it should switch from fastboot to fastboot usb. Use the command fastboot flash boot boot.img. You should now be able to reboot your phone and enjoy cm10!
Click to expand...
Click to collapse
So I shouldn't install kernel (Hellboy )??? I unlocked my bootloader so my device should be s - off or does that mean something different plz guide me
mandarmane said:
So I shouldn't install kernel (Hellboy )??? I unlocked my bootloader so my device should be s - off or does that mean something different plz guide me
Click to expand...
Click to collapse
You should install kernel that given on every ROM thread, and not always HELLBOY.
Unlocked bootloader doesn't mean that your phone is S-Offed, it is different.
mandarmane said:
So I shouldn't install kernel (Hellboy )??? I unlocked my bootloader so my device should be s - off or does that mean something different plz guide me
Click to expand...
Click to collapse
There is a whole lot more work to get the device s-off. Your kernel is the boot img that I mentioned earlier. I am PrimoC, so I don't have experience with hellboy, but I do have to flash a new kernel with every rom. If you are going from one cm10 to another cm10, you might be safe, but I wouldn't chance it. Unlocking your bootloader allows you to flash kernels. It doesn't give you s-off.
sellersj27 said:
There is a whole lot more work to get the device s-off. Your kernel is the boot img that I mentioned earlier. I am PrimoC, so I don't have experience with hellboy, but I do have to flash a new kernel with every rom. If you are going from one cm10 to another cm10, you might be safe, but I wouldn't chance it. Unlocking your bootloader allows you to flash kernels. It doesn't give you s-off.
Click to expand...
Click to collapse
can you provide any tutorial for installing twrp on htc one v gsm version and downloading link plz that will help me alot
Ringford said:
You should install kernel that given on every ROM thread, and not always HELLBOY.
Unlocked bootloader doesn't mean that your phone is S-Offed, it is different.
Click to expand...
Click to collapse
While flashing cm10 which boot.img file should i use the one that came with rom or hellboy
mandarmane said:
While flashing cm10 which boot.img file should i use the one that came with rom or hellboy
Click to expand...
Click to collapse
The one that came with ROM. And please.. just read the damn instruction in the ROM thread, everything is said clearly there, I can bet on that. Read it carefully step by step or you will end up here soon or sooner with another question like "Guys my htc is bricked help".
I just got home from work.... Did you get it, or would you like that tutorial
Sent from my One V using xda app-developers app
sellersj27 said:
I just got home from work.... Did you get it, or would you like that tutorial
Sent from my One V using xda app-developers app
Click to expand...
Click to collapse
Plz provide me tutorial and can you confirm from any gsm user which kernel should I use for cm10, from cm10 thread I think its Hellboy but not sure and I can't post in development section yet.. thanks
No more boot up animation. Please help. its stuck in red text htc.. boot.. plz help.. but it goes through the start up on htc one m8
Kuechikun said:
No more boot up animation. Please help. its stuck in red text htc.. boot.. plz help.. but it goes through the start up on htc one m8
Click to expand...
Click to collapse
In order to get out of htc boot screen you have to hold the power and vol up for 10 seconds and then when the screen turns off, hold vol down while still holding power. Then you will be taken to hboot. You don't have an os or rom installed on your phone so you're going to have to flash a new custom rom. All you have to do is connect your phone to your computer with usb cable and use adb commands to push rom file to your phone and through your custom recovery you can flash a new rom. Download this zip and extract it to your desktop or wherever you want. http://www.sakitechonline.com/downlo...stboot_adb.zip Then you download the custom rom you want and make sure it works with your phone. so you drag the custom rom file to the fastboot folder and then in the fastboot folder hold shift and right click on your mouse and press "open command window here" Then in the command window type adb devices to make sure adb is working and you should get numbers that means it works. Make sure your phone is in custom recovery and then type adb push exact name of your rom file.zip /sdcard/ and press enter and then it will push your rom file it will take couple of minutes and then you have successfully pushed your rom file and you can flash a new rom
Kuechikun said:
No more boot up animation. Please help. its stuck in red text htc.. boot.. plz help.. but it goes through the start up on htc one m8
Click to expand...
Click to collapse
Update your firmware.
Captain_Throwback said:
Update your firmware.
Click to expand...
Click to collapse
Noob here, Why does it need to update when the firmware of your ROM is updated? or is it diff?
I thought the ROM already comes with the updated firmware. I'm trying to flash Android revolution 11.1
Kuechikun said:
Noob here, Why does it need to update when the firmware of your ROM is updated? or is it diff?
I thought the ROM already comes with the updated firmware. I'm trying to flash Android revolution 11.1
Click to expand...
Click to collapse
I think the ROM runs on the updated firmware, not that it comes with the updated firmware. There's a difference.
Read up on some of the stuff being said about the firmware. YES!! I KNOW you are running Android Revolution but still, just for information purposes:
Firmware and the new Android 4.4.3
There the crew from Viper ROM discusses some stuff about the Firmware.
[2014.09.07][GUIDE] FUU and Firmware flashing
Some more info/guide on the Firmware.
Happy reading :good:
BerndM14 said:
I think the ROM runs on the updated firmware, not that it comes with the updated firmware. There's a difference.
Read up on some of the stuff being said about the firmware. YES!! I KNOW you are running Android Revolution but still, just for information purposes:
Firmware and the new Android 4.4.3
There the crew from Viper ROM discusses some stuff about the Firmware.
[2014.09.07][GUIDE] FUU and Firmware flashing
Some more info/guide on the Firmware.
Happy reading :good:
Click to expand...
Click to collapse
I need some reading. This is a long process. Thankyou!
So it has no boot animation, but it still boots to home screen right??
Sent from my HTC One_M8 using Tapatalk
I recently upgraded my phone to OFFICIAL marshmallow update that Asus provided. Upon doing so my phone's bootloader got magically locked again and when I tried to flash custom TWRP recovery via fastboot the recovery got corrupt. I tried unlocking bootloader again with the software but it isn't supported cause It's marshmallow. The recovery can't be recovered to stock version either. What do I do? I can only access fastboot and nothing else.
GenoyTexy said:
I recently upgraded my phone to OFFICIAL marshmallow update that Asus provided. Upon doing so my phone's bootloader got magically locked again and when I tried to flash custom TWRP recovery via fastboot the recovery got corrupt. I tried unlocking bootloader again with the software but it isn't supported cause It's marshmallow. The recovery can't be recovered to stock version either. What do I do? I can only access fastboot and nothing else.
Click to expand...
Click to collapse
download the recovery file from here https://mega.nz/#F!k4MHiAgL!dVuOKeH3eokcwPSNI79ffw then flash it via fastboot
go to fastboot mode
adb devices
adb sideload "your mm.zip"
I had unlocked the bootloader and then, flashed global stable, but unfortunately, the mtp (and by the way, fastboot and adb access from a pc) was somehow disabled, and to complete the disgrace package, i have just the original mi recovery. I'm currently at the lastest global stable rom, 10.2, without any hope. What can i do?
jvictor852 said:
I had unlocked the bootloader and then, flashed global stable, but unfortunately, the mtp (and by the way, fastboot and adb access from a pc) was somehow disabled, and to complete the disgrace package, i have just the original mi recovery. I'm currently at the lastest global stable rom, 10.2, without any hope. What can i do?
Click to expand...
Click to collapse
can you enter fastboot. if so then
flash a fstboot rom same ARB as your last .. using miflash tools.
raptorddd said:
can you enter fastboot. if so then
flash a fstboot rom same ARB as your last .. using miflash tools.
Click to expand...
Click to collapse
No, i can surely enter on fastboot but it wont connect to pc. By the way it just dont works.
is your problem solved? Because I'm also facing this same issue and i have tried almost everything which i could.
I'm on MIUI latest version and I'm trying to downgrade miui verision to 10.2 through OTA updates in order to fix it but it's showing downgrading is not allowed and I'm completely stucked.
Plz if anyone know to solv this out kindly let me know.
As issue says MTP not working i also can't flash TWRP recovery from fastboot and since i'm on stock rom, my phone can't be rooted and i can't edit build.prop file to enable mtp.
Thanks.
TheDeaDKiLLer said:
is your problem solved? Because I'm also facing this same issue and i have tried almost everything which i could.
I'm on MIUI latest version and I'm trying to downgrade miui verision to 10.2 through OTA updates in order to fix it but it's showing downgrading is not allowed and I'm completely stucked.
Plz if anyone know to solv this out kindly let me know.
As issue says MTP not working i also can't flash TWRP recovery from fastboot and since i'm on stock rom, my phone can't be rooted and i can't edit build.prop file to enable mtp.
Thanks.
Click to expand...
Click to collapse
Lol win10 is a bad joke... use usb2.0 hub or search for reg fix on xda forum. Or use win7 or linux.
And there is few versions of fastboot.