This took me a lot of time to write. A lot of time to search. A lot of my patience during the process described bellow.
If this was useful in anyway just click "thanks" button and "Rate" this thread.
That's how you thank me.
I won't held any responsibility if you broke your phone for good! This is based on research and on my own experience. This is just a guide who exists to help you.
Ok, after i bricked (?!) my Lenovo K910 and recover it from dead only after 1 month(!!!) and after receive a few messages i left you with my Step-by-Step Guide of how to use QPST Tools to recover your dead phone.
Important Information
Please do not fill this thread just to write "thanks" that's why xda-developers administrators created a few years ago this button:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If this thread was good for you use the "Rate" button. Use it. :good:
I won't held any responsibility if you broke your phone for good! This is based on research and on my own experience. This is just a guide who exists to help you.
History
To make it short i bought this in August 26th and on 27th i completely broke my K910. I was only able to recover it by September 26th!!!
It was so broken that i ended up with no vibration, no LED, no nothing. It's seams that i send my money to trash or at least a hugely expensive paperweight :laugh:
After searching for a solution in web sites as diverse as Chinese, Romanians, Indians, Russians, Spanish, etc. etc. i've found one in particular in HTC Mania Spain written by corion witch i thought...that could be it!!! :highfive:
Wrong...I've follow all the provided steps one-by-one but nothing.
I had tried virtualize Windows since XP version. Nothing seams to work until...on a rare and brilliant occasion ... :angel:
So...Let's cut the crack and let's go with it.
The following steps where the ones i've followed. This was based mostly on corion's tread in HTC Mania as described above plus my own experience witch i think make some difference and lead me to recover my phone.
Finally there's one thing that's hugely important and that is lots and lots of patience
Post #2 - Pré-Requisites
Post #3 - Tools Needed to Properly Recover Your Lenovo K910
Post #4 - Guide [How to Proper Install and Configure QPST]
Post #5 - [Guide]How To Recover With QPST
Post #6 - No Vibration, No LED, No Nothing? Don't Worry, Here's a Solution
Credits
All the bellow persons and/or entities helped me somehow and by that i was able to write this thread were it should be accessible for all in just one place.
Thank you all!
corion- from HTCMania - If it wasn't his guide i would probably never recover my phone
sergio - from HTCMania - He also wrote another guide to recover with MiFlasher but espetially he had lot's and lot's of patience with me and my questions
VibeUI China
Lenovo Forum Russia
Lenovo Community India
To me Crowds - After 1 month trying over and over again i had to be here
...and if i saved your phone feel free to buy me a beer. It's much, much cheaper than Lenovo
Kind Regards
Crowds
Pré-Requisites
Based in my experience and after i try this on my Win8.1 without success i try all the following steps. All of them unsuccessful.
Virtualize Win XP 32-bits & 64-bits
Virtualize Win7 32-bits & 64-bits
You can imagine my patience and hours i've spend installing all those Windows OS and all Microsoft patches most of all because my laptop is my professional one so i couldn't just install a new copy
After all those frustrations, in a act of despair, i decided to clean completely my laptop and pray that i could recover my work lately. This was the most wisely decision i've made after 1 month!!! So...
Pre-Requisites*
Format your PC;
Install your OS from scratch;
Apply all the patches from Microsoft;
Buy or get a old USB cable extention** from someone.
Notes:
* Again, this is based on my experience, you may try all the steps without format your PC. You had nothing to loos atm.
** In our days USB cables transfer data in a very high rate so the idea of using an USB extension is to slow down a little bit transfer data between Phone/PC. Older the better. We going to need this as you see ahead in post #5
Kind Regards
Crowds
Tools Needed to Properly Recover Your Lenovo K910
Tools Needed
QPST - Qualcomm application to recover your phone;
Drivers - Drivers needed to windows sees your phne as COM Port and not as USB;
Lenovo Drivers - Drivers used to connect Phone-PC;
Lenovo QST File - This is the Lenovo OS to further install on your phone.
MD5 - cdab8d0b1a363a4662acec7f13861460
This software is for K910 version only!!! Do not use this on any other version like K910L or something!!!
Notepdad++
Do not use Notepdad from Windows
7-Zip - Use this to unpack any compressed file
Kind Regards
Crowds
Guide [How to Proper Install and Configure QPST]
Here is where some work begins.
1. In order to recover your Lenovo K910 you must follow this steps one by one so read carefully and please don fill this thread with questions already answered here.
2. Like me, if you take 1 month...take it. If you take 20 minutes...great but please don't ask over and over the same questions. :highfive:
3. If you had any questions regarding tech common sense use my dearest friend here
4. If by any chance you really broke your phone, it's your fault! You're the one who lead to this, not me!
Installation Procedure
Install QPST you've just downloaded
Reboot your PC with "Disable signature verification of digital controllers" checked
Read point 3 from above hidden text
Open Device Manager
Connect your phone to PC through a USB cable pressing VOL-
This is where you going to use the USB extension cable written above. Try another key combination if this one doesn't work
By this time your PC began searching for the correct drivers. If everything went ok, device manager will see android phone as QHSUSB_DLOAD or QHSUSB_BULK with an exclamation mark. If not try again,
--- If VOL- doesn't work try several combinations, like VOL+/USB cable or VOL-/VOL+/USB ---
Install the drivers (not Lenovo ones) manually from the drivers folder you've just downloaded (Install accordly to your OS version)
Your Device Manager should see you phone as:
Doesn't matter if it is COM10 or another
Reboot your PC with "Disable signature verification of digital controllers" checked
Read point 3 from above hidden text
Install Lenovo drivers
Reboot your PC with "Disable signature verification of digital controllers" checked
Read point 3 from above hidden text
Now continue to the next step on post #5
Kind Regards
Crowds
[Guide]How To Recover With QPST
This is where the hard work begin yet with it you might...just might, bring your phone back alive again. :good:
Important Notice:
Like i wrote before, i held no responsibility from now on if your brake your phone for life
If you managed to connect your phone to PC in the proper way (post #4) you're good to go. :cyclops:
Before we go deeper on "Step-by-Step Instructions" we need to configure just a couple of things first.
Unpack the Lenovo QST File that you download from 3rd post [K910_1_S_3_2144.1_0040_140219_qpst.7z] with 7-Zip
Move the bin folder to PC root [C:\]
Inside bin folder you'll find flash_local.xml file. Open it with Notepad++
Configure this way
Now you're finally ready :highfive:
Step-by-Step Instructions
Open Device Manager and QPST Software from installation folder
Connect your phone to PC through USB extention cable
Check if Device Manager sees your phone properly
and QPST to
If everything's ok open eMMC Software Download. Now do the following:
On Sahara XML file, put the path where the flash_local.xml file is (the one you edited previously).
In Flash Programmer file name write MPRG8974.mbn
In Boot Image write 8974_msimage.mbn
In Load XML def... choose rawprogram0.xml file from explorer
In Load patch def... choose patch0.xml file from explorer
Uncheck Program MMC device
At this time your PC no longer sees your phone at COM Port but it had changed to Lenovo USB something. Connect your phone to PC through USB extention cable again with the right key combination
Right after you inser USB cable start pressing ENTER key on your PC like a maniac. This is the secret. You had to click it at the right time in order eMMC Software Download starts the download process.
--- Again. This is the most stressful step of all of this. Try not to brake your PC and in an act of despair don't crash your phone against the wall ---
In order to do the above i had to wipe all my PC after spend an entire month without results
If you received any message regarding your disks or format choose NO or CANCEL
Finally you've made it, let's go further
Uncheck Program Boot Loaders
Now check the Program MMC device
Choose your phone from the list of drives
Click Download again
When the process ended remove USB cable from PC and reboot the phone.
Nothing like an image to explain the above steps, right guys? :laugh:
Hope this help you anyway :good:
IMPORTANT:
If you ended with a phone without vibration, led or anything that means that you "kill" the battery. In that case you have to proceed in another way because your phone will never boot and you won't be able to start nothing.
Check next post if that is your case
Kind Regards
Crowds
No Vibration, No LED, No Nothing? Don't Worry, Here's a Solution
Isn't Android Mobile Phones wonderful?!?!
There's a solution for almost everything :laugh::laugh:
Description
You've ended with a complete dead phone because you've spend to much time playing with it on previous post.
The good thing is that your battery is just in a 0% stage so what should we do in this case? Lenovo sell this like a non-removal battery, how the heck i solve this tricky situation?!
Solution
You must be thinking "how stupid i am for spending money on a non-removal battery phone" well... it is removable!!! Check how to do it here. At this video it's only shown how to get to the battery. You must disconnect it.
Now you can go back to post #5 and follow the provided steps :silly:
Kind Regards
Crowds
Crowds said:
Here is where some work begins.
1. In order to recover your Lenovo K910 you must follow this steps one by one so read carefully and please don fill this thread with questions already answered here.
2. Like me, if you take 1 month...take it. If you take 20 minutes...great but please don't ask over and over the same questions. :highfive:
3. If you had any questions regarding tech common sense use my dearest friend here
4. If by any chance you really broke your phone, it's your fault! You're the one who lead to this, not me!
Installation Procedure
Install QPST you've just downloaded
Reboot your PC with "Disable signature verification of digital controllers" checked
Read point 3 from above hidden text
Open Device Manager
Connect your phone to PC through a USB cable pressing VOL-
This is where you going to use the USB extension cable written above. Try another key combination if this one doesn't work
By this time your PC began searching for the correct drivers. If everything went ok, device manager will see android phone as QHSUSB_DLOAD or QHSUSB_BULK with an exclamation mark. If not try again,
--- If VOL- doesn't work try several combinations, like VOL+/USB cable or VOL-/VOL+/USB ---
Install the drivers (not Lenovo ones) manually from the drivers folder you've just downloaded (Install accordly to your OS version)
Your Device Manager should see you phone as:
Doesn't matter if it is COM10 or another
Reboot your PC with "Disable signature verification of digital controllers" checked
Read point 3 from above hidden text
Install Lenovo drivers
Reboot your PC with "Disable signature verification of digital controllers" checked
Read point 3 from above hidden text
Now continue to the next step on post #5
Kind Regards
Crowds
Click to expand...
Click to collapse
Hi Crowds,
when I install the QPST driver the phone is seen in device manager same as your picture. I can then see the COM port in QPST configuration but it says 'No Phone'. Once I install the Lenovo drivers and reboot the phone is no longer available in the QPST configuration at all. (Sorry to take more of your time, I did try to Google this but have not found anything.)
RASTAS12 said:
Hi Crowds,
when I install the QPST driver the phone is seen in device manager same as your picture. I can then see the COM port in QPST configuration but it says 'No Phone'. Once I install the Lenovo drivers and reboot the phone is no longer available in the QPST configuration at all. (Sorry to take more of your time, I did try to Google this but have not found anything.)
Click to expand...
Click to collapse
Hi RASTAS12
That's a very, very common question
You're at this stage of post #5
Crowds said:
[*]Uncheck Program MMC device
[*]At this time your PC no longer sees your phone at COM Port but it had changed to Lenovo USB something. Connect your phone to PC through USB extention cable again with the right key combination
[*]Right after you inser USB cable start pressing ENTER key on your PC like a maniac. This is the secret. You had to click it at the right time in order eMMC Software Download starts the download process.
--- Again. This is the most stressful step of all of this. Try not to brake your PC and in an act of despair don't crash your phone against the wall ---
Click to expand...
Click to collapse
Like i wrote, you had to have very patience atm and when you loose COM Port you should disconnect USB cable and try again
Crowds said:
[*]Right after you inser USB cable start pressing ENTER key on your PC like a maniac. This is the secret. You had to click it at the right time in order eMMC Software Download starts the download process.
Click to expand...
Click to collapse
C hears
Crowds
help urgent
Crowds said:
This took me a lot of time to write. A lot of time to search. A lot of my patience during the process described bellow.
If this was useful in anyway just click "thanks" button and "Rate" this thread.
That's how you thank me.
I won't held any responsibility if you broke your phone for good! This is based on research and on my own experience. This is just a guide who exists to help you.
Ok, after i bricked (?!) my Lenovo K910 and recover it from dead only after 1 month(!!!) and after receive a few messages i left you with my Step-by-Step Guide of how to use QPST Tools to recover your dead phone.
Important Information
Please do not fill this thread just to write "thanks" that's why xda-developers administrators created a few years ago this button:
If this thread was good for you use the "Rate" button. Use it. :good:
I won't held any responsibility if you broke your phone for good! This is based on research and on my own experience. This is just a guide who exists to help you.
History
To make it short i bought this in August 26th and on 27th i completely broke my K910. I was only able to recover it by September 26th!!!
It was so broken that i ended up with no vibration, no LED, no nothing. It's seams that i send my money to trash or at least a hugely expensive paperweight :laugh:
After searching for a solution in web sites as diverse as Chinese, Romanians, Indians, Russians, Spanish, etc. etc. i've found one in particular in HTC Mania Spain written by corion witch i thought...that could be it!!! :highfive:
Wrong...I've follow all the provided steps one-by-one but nothing.
I had tried virtualize Windows since XP version. Nothing seams to work until...on a rare and brilliant occasion ... :angel:
So...Let's cut the crack and let's go with it.
The following steps where the ones i've followed. This was based mostly on corion's tread in HTC Mania as described above plus my own experience witch i think make some difference and lead me to recover my phone.
Finally there's one thing that's hugely important and that is lots and lots of patience
Post #2 - Pré-Requisites
Post #3 - Tools Needed to Properly Recover Your Lenovo K910
Post #4 - Guide [How to Proper Install and Configure QPST]
Post #5 - [Guide]How To Recover With QPST
Post #6 - No Vibration, No LED, No Nothing? Don't Worry, Here's a Solution
Credits
All the bellow persons and/or entities helped me somehow and by that i was able to write this thread were it should be accessible for all in just one place.
Thank you all!
corion- from HTCMania - If it wasn't his guide i would probably never recover my phone
sergio - from HTCMania - He also wrote another guide to recover with MiFlasher but espetially he had lot's and lot's of patience with me and my questions
VibeUI China
Lenovo Forum Russia
Lenovo Community India
To me Crowds - After 1 month trying over and over again i had to be here
...and if i saved your phone feel free to buy me a beer. It's much, much cheaper than Lenovo
Kind Regards
Crowds
Click to expand...
Click to collapse
sir i was flasing the rom on vibe z using twrp touch as mention in post i landed in a vague problem
first my device is no longer recognised my computer
i tried to install the driver but no help
secondly device flashes to lenovo logo and then the download mode blue light is there
vibrates and shut down
when connected to pc show multiple drives as mentioned in post 934
http://forum.xda-developers.com/showthread.php?t=2597590&page=94
plz do help if u can do a remote help i will pay for your services
i need urgent help as this is only surviver for me
cellbuster21 said:
first my device is no longer recognised my computer
i tried to install the driver but no help
Click to expand...
Click to collapse
For this remove all lenovo drivers from PC and then reboot
Follow my instructions in post #4
Follow my instructions in post #5 (if you're phone has blue LED try follow from step 9) if you loose blue LED you should follow from step 1 to finish
This is the good thing about experience.
At this momment i've just broke my phone for the 3rd time trying to compile a new recovery to use in my next rom so ... one more time i had to use my own guide
hello
Crowds said:
This is the good thing about experience.
At this momment i've just broke my phone for the 3rd time trying to compile a new recovery to use in my next rom so ... one more time i had to use my own guide
Click to expand...
Click to collapse
now the computer says"usb device not recognised "
i guess now i need to reinstall the driver
can u send me correct driver
earlier i copied drivers to system 32 driver folder
is there any other way out
help help r
cellbuster21 said:
now the computer says"usb device not recognised "
i guess now i need to reinstall the driver
can u send me correct driver
earlier i copied drivers to system 32 driver folder
is there any other way out
Click to expand...
Click to collapse
plz check the screen shot i got when phone is connected
cellbuster21 said:
now the computer says"usb device not recognised "
i guess now i need to reinstall the driver
can u send me correct driver
earlier i copied drivers to system 32 driver folder
is there any other way out
Click to expand...
Click to collapse
All files needed are provided in the correct post you just have to install acordly to instructions and your OS
cellbuster21 said:
plz check the screen shot i got when phone is connected
Click to expand...
Click to collapse
Like i said over and over ... read carefully
Crowds said:
If you received any message regarding your disks or format choose NO or CANCEL
Click to expand...
Click to collapse
Good luck
urgentt
Crowds said:
This is the good thing about experience.
At this momment i've just broke my phone for the 3rd time trying to compile a new recovery to use in my next rom so ... one more time i had to use my own guide
Click to expand...
Click to collapse
sir now iam getting 2 error
create agent failed 0x800706BA
and
cellbuster21 said:
sir i was flasing the rom on vibe z using twrp touch as mention in post i landed in a vague problem
first my device is no longer recognised my computer
i tried to install the driver but no help
secondly device flashes to lenovo logo and then the download mode blue light is there
vibrates and shut down
when connected to pc show multiple drives as mentioned in post 934
http://forum.xda-developers.com/showthread.php?t=2597590&page=94
plz do help if u can do a remote help i will pay for your services
i need urgent help as this is only surviver for me
Click to expand...
Click to collapse
cellbuster21 said:
sir now iam getting 2 error
create agent failed 0x800706BA
and
Click to expand...
Click to collapse
hi bro
just an advice if i may...
...chill out. or phone is recoverable, ok?
smoke a cigarette or s.th else, drink a cofee and the return.
Read ALL the steps slowly and make sure you read them all.
Like i wrote this take me 1 month for the 1st time because im too stressfull do to things right. When i was about to give up i follow the exact steps i wrote and it took me 20 min.
I wrote that i've broke mine for the 3rd time a couple of minutes ago and my phone is back to life now
Unfortunatelly im stuck on a chinese recovery witch i cant understand ****!!!
9473
Crowds said:
hi bro
just an advice if i may...
...chill out. or phone is recoverable, ok?
smoke a cigarette or s.th else, drink a cofee and the return.
Read ALL the steps slowly and make sure you read them all.
Like i wrote this take me 1 month for the 1st time because im too stressfull do to things right. When i was about to give up i follow the exact steps i wrote and it took me 20 min.
I wrote that i've broke mine for the 3rd time a couple of minutes ago and my phone is back to life now
Unfortunatelly im stuck on a chinese recovery witch i cant understand ****!!!
Click to expand...
Click to collapse
thanks bro
now its gets disconnected very fast within a 2 minute
battery is out and disconnected
if i can make it today will send you invite for one plus as thanks giving
thanks
---------- Post added at 11:41 PM ---------- Previous post was at 11:37 PM ----------
cellbuster21 said:
thanks bro
now its gets disconnected very fast within a 2 minute
battery is out and disconnected
if i can make it today will send you invite for one plus as thanks giving
thanks
Click to expand...
Click to collapse
this is mine 3rd night to k91o
its 3:30 am and im still struggling
cellbuster21 said:
thanks bro
now its gets disconnected very fast within a 2 minute
battery is out and disconnected
if i can make it today will send you invite for one plus as thanks giving
thanks
---------- Post added at 11:41 PM ---------- Previous post was at 11:37 PM ----------
this is mine 3rd night to k91o
its 3:30 am and im still struggling
Click to expand...
Click to collapse
if your battery's out you're a lucky guy like me i've been there 2 : D
seriously...chill out and most important don't panic. i know by experience how hard that could be at first try :crying:
helllo
cellbuster21 said:
sir now iam getting 2 error
create agent failed 0x800706BA
and
Click to expand...
Click to collapse
ggreat now i have one more error
run time error
---------- Post added at 11:54 PM ---------- Previous post was at 11:49 PM ----------
cellbuster21 said:
ggreat now i have one more error
run time error
Click to expand...
Click to collapse
bro why these error occur
there is some thing i ma missing
---------- Post added 5th October 2014 at 12:35 AM ---------- Previous post was 4th October 2014 at 11:54 PM ----------
cellbuster21 said:
ggreat now i have one more error
run time error
---------- Post added at 11:54 PM ---------- Previous post was at 11:49 PM ----------
bro why these error occur
there is some thing i ma missing
Click to expand...
Click to collapse
ok got the error
my phone is recognised as qualcomm hs-usb diagnostic 9006
no as ldownloader 9008
now bro plz help me how to
make it 9008
thanks
cellbuster21 said:
ggreat now i have one more error
run time error
---------- Post added at 11:54 PM ---------- Previous post was at 11:49 PM ----------
bro why these error occur
there is some thing i ma missing
---------- Post added 5th October 2014 at 12:35 AM ---------- Previous post was 4th October 2014 at 11:54 PM ----------
ok got the error
my phone is recognised as qualcomm hs-usb diagnostic 9006
no as ldownloader 9008
now bro plz help me how to
make it 9008
thanks
Click to expand...
Click to collapse
Its better 9006 than 9008
Great news keep going if you don't hand any of those runtime errors
Sent from my Lenovo K910 using Tapatalk
Related
Hi guys!
Just recently I bought the "HDC Galaxy Note 2" off of fastcardtech. I got it a few days ago, am fairly pleased with it except for the slight miscalibrated touch screen. There are some apps on various markets aiming to fix this by re-applying new calibrations. The problem is that you'll have to be rooted in order to run them.
The phone comes with a built-in calibration setting, called "Als_ps calibration", which you can utizile to correct the sensor. Alas, it only corrects the phone's recognition of obstacles placed above it, so that you accidentaly wouldn't press any undesired button during a call.
Phone: http://www.fastcardtech.com/Galaxy-Note-2-Mega
Here's what I've done so far!
Enabled USB-debugging and installed USB-drivers. [MT65xx_USB_Driver.zip]
Tried the bin4ry root method, normal mode. [Root_with_Restore_by_Bin4ry_v18.zip]
This method:
http://forum.xda-developers.com/showthread.php?t=1886460
Everything works just fine until the phone reboots. Bin4ry is then unable to mount or copy the last files needed to apply root permission, see attached picture.
I have attached my specs in a screenshot, nevermind the quality, t'was done by another crap-camera! Sorry ;]
Any kind soul who can help me root this thing?
Edit:
Rooting this device has been made possible by GT35pro. See posts below.
same problem
KristN91 said:
Hi guys!
Just recently I bought the "HDC Galaxy Note 2" off of fastcardtech. I got it a few days ago, am fairly pleased with it except for the slight miscalibrated touch screen. There are some apps on various markets aiming to fix this by re-applying new calibrations. The problem is that you'll have to be rooted in order to run them.
The phone comes with a built-in calibration setting, called "Als_ps calibration", which you can utizile to correct the sensor. Alas, it only corrects the phone's recognition of obstacles placed above it, so that you accidentaly wouldn't press any undesired button during a call.
Phone: http://www.fastcardtech.com/Galaxy-Note-2-Mega
Here's what I've done so far!
Enabled USB-debugging and installed USB-drivers. [MT65xx_USB_Driver.zip]
Tried the bin4ry root method, normal mode. [Root_with_Restore_by_Bin4ry_v18.zip]
This method:
http://forum.xda-developers.com/showthread.php?t=1886460
Everything works just fine until the phone reboots. Bin4ry is then unable to mount or copy the last files needed to apply root permission, see attached picture.
I have attached my specs in a screenshot, nevermind the quality, t'was done by another crap-camera! Sorry ;]
Any kind soul who can help me root this thing?
Click to expand...
Click to collapse
omg i have the exact same problem, did you get a solution? PLEASE i need to root it so bad
CWM installed and rooted the HDC galaxy note 2 MAGE / MEGA
rebmoe said:
omg i have the exact same problem, did you get a solution? PLEASE i need to root it so bad
Click to expand...
Click to collapse
I just created the cwm recovery and root. The link is on my blog. The zip file is password protected so be sure to get it from my blog page.
http://gt35pro-mobile-gadgets.blogspot.sg/2013/02/cmw-recovery-english-and-root-for-hdc.html
After you have clockwork mod recovery, use it to flash the root access into the phone.
Have fun!
KristN91 said:
Hi guys!
Just recently I bought the "HDC Galaxy Note 2" off of fastcardtech. I got it a few days ago, am fairly pleased with it except for the slight miscalibrated touch screen. There are some apps on various markets aiming to fix this by re-applying new calibrations. The problem is that you'll have to be rooted in order to run them.
The phone comes with a built-in calibration setting, called "Als_ps calibration", which you can utizile to correct the sensor. Alas, it only corrects the phone's recognition of obstacles placed above it, so that you accidentaly wouldn't press any undesired button during a call.
Phone: http://www.fastcardtech.com/Galaxy-Note-2-Mega
Here's what I've done so far!
Enabled USB-debugging and installed USB-drivers. [MT65xx_USB_Driver.zip]
Tried the bin4ry root method, normal mode. [Root_with_Restore_by_Bin4ry_v18.zip]
This method:
http://forum.xda-developers.com/showthread.php?t=1886460
Everything works just fine until the phone reboots. Bin4ry is then unable to mount or copy the last files needed to apply root permission, see attached picture.
I have attached my specs in a screenshot, nevermind the quality, t'was done by another crap-camera! Sorry ;]
Any kind soul who can help me root this thing?
Click to expand...
Click to collapse
Kristen, where you able to re-calibrate after rooting; I just ordered this phone last week so I want to be prepared if need be.
londonflu said:
Kristen, where you able to re-calibrate after rooting; I just ordered this phone last week so I want to be prepared if need be.
Click to expand...
Click to collapse
The one I got did not have that screen calibration problem. Everything works good. Anyway, root is available now.
Superb!
Thank you for sorting this out!
-KristN91
Extra Guide
Follow the link provided by GT35pro in his first post.
To everyone attempting this flash;
!! First of all, copy the Superuser.zip to the root of your internal phone memory or external SD Card.!!
* Use a high-quality mini-USB cable (The one that comes with your phone should work just fine)
* Connect your MEGA to your pc, without the battery inserted.
(This device will connect and disconnect, when it's visible, be sure to grab it and follow the next step)
* Make sure that you have the right drivers for MTK65xx preloader "mtk65xx Vcom driver" and install them through the Device Manager.
* Insert your battery again, with the cable still connected, and install the second MTK65xx preloader.
* Disconnect phone from pc and remove the battery
* Start up Smart flash Tool and select the scatter file included in the package.
* Now, select and tick the checkbox for Recovery only. Smart Flash Tool will complain about the flash, due to it not containing all the appropriate files needed for a "secure boot". Nevermind that pop-up and proceed with downloading.
* Start Download
* Insert the battery and connect your phone to your pc, with that, the flashing should start.
* Boot Phone into recovery mode (pwr button and vol - or vol +) and install superuser from ZIP-file.
* After reboot you should be rooted.
///////////////
Fun Fact!
I actually managed to install a pre-rooted HDC S7100 rom on my MEGA.
The port isn't 100% accurate
-Invalid IMEI, this was fixed by Talkingmobile's guide; " how to write imei number for MTK 65XX " -Just google it!
-Auto-rotation is unavailable, no fix yet.
-Als_pl calibration is unavailable (resulting in active screen during call)
Besides that, the rom is arguably better than the MEGA's original N7100 rom, in terms of visual presentation.
Smooth transitions, vivid and vibrant colors would be a good example of aspects that would come out as improved over the original rom.
Interested in the S7100 rom? Just PM me and I'll provide the link.
Cheers!
S_ft_need_download_all_fail (4050)
I'm trying for several days, but always get this error in the flash tool: S_FT_NEED_DOWNLOAD_ALL_FAIL (4050)
Tried on Windows 7 x64, Windows 7 x32 and Windows XP SP3 (x32). Only on the Windows XP computer I was able to make a backup with Flash Tool using the Read Back option.
When I try to flash the red bar goes to 100% then the error message shows...
Does anyone get this error aswell, and did someone manage to solve this?
Please help, I'm in desperate need for root because I need touch screen calibration.
Thnx!!
YES! SUCCES!! I managed to root my HDC Mage :laugh: Did use another method though, check http://forum.xda-developers.com/showthread.php?t=2160490 if you are interested.
Anyway, now back to calibrating the touchscreen. What tools are good do fix touchscreen issues? I already tried http://forum.xda-developers.com/showthread.php?t=934500, but I still am not satisfied.
Thnx :good:
Just curious, if anyone that owns an HDC, is actually located in the USA?
londonflu said:
Just curious, if anyone that owns an HDC, is actually located in the USA?
Click to expand...
Click to collapse
Nope, the Netherlands. Why do you ask?
Sent from my GT-I9000 using xda app-developers app
jg77 said:
Nope, the Netherlands. Why do you ask?
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Because I tried to order 5 different phones from China including Fastcardtech; they couldn't ship for some reason; even got an empty box from ZOPO mobile. I ended up buying the BLU here in the US, I'm kind of glad it happened, since now I have an N'vidia Tegra 4 CPU, that runs circles around the dual-core phones.
I did order one more phone on ebay from China, been waiting for 2 weeks now. MAKES ME WONDER IF THEY EVEN ACTUALLY SHIP TO THE US AT ALL?
Thank to Paypal I was able to get refunded everytime.
KristN91 said:
Follow the link provided by GT35pro in his first post.
To everyone attempting this flash;
!! First of all, copy the Superuser.zip to the root of your internal phone memory or external SD Card.!!
* Use a high-quality mini-USB cable (The one that comes with your phone should work just fine)
* Connect your MEGA to your pc, without the battery inserted.
(This device will connect and disconnect, when it's visible, be sure to grab it and follow the next step)
* Make sure that you have the right drivers for MTK65xx preloader "mtk65xx Vcom driver" and install them through the Device Manager.
* Insert your battery again, with the cable still connected, and install the second MTK65xx preloader.
* Disconnect phone from pc and remove the battery
* Start up Smart flash Tool and select the scatter file included in the package.
* Now, select and tick the checkbox for Recovery only. Smart Flash Tool will complain about the flash, due to it not containing all the appropriate files needed for a "secure boot". Nevermind that pop-up and proceed with downloading.
* Start Download
* Insert the battery and connect your phone to your pc, with that, the flashing should start.
* Boot Phone into recovery mode (pwr button and vol - or vol +) and install superuser from ZIP-file.
* After reboot you should be rooted.
///////////////
Fun Fact!
I actually managed to install a pre-rooted HDC S7100 rom on my MEGA.
The port isn't 100% accurate
-Invalid IMEI, this was fixed by Talkingmobile's guide; " how to write imei number for MTK 65XX " -Just google it!
-Auto-rotation is unavailable, no fix yet.
-Als_pl calibration is unavailable (resulting in active screen during call)
Besides that, the rom is arguably better than the MEGA's original N7100 rom, in terms of visual presentation.
Smooth transitions, vivid and vibrant colors would be a good example of aspects that would come out as improved over the original rom.
Interested in the S7100 rom? Just PM me and I'll provide the link.
Cheers!
Click to expand...
Click to collapse
I took out the battery then connect it to the pc and open device manager, it show mtk65xx preloader then the phone disconnect its self and connect back every two seconds is there a way to fix this pls
thank you
I took out the battery then connect it to the pc and open device manager, it show mtk65xx preloader then the phone disconnect its self and connect back every two seconds is there a way to fix this pls
farazafs said:
I took out the battery then connect it to the pc and open device manager, it show mtk65xx preloader then the phone disconnect its self and connect back every two seconds is there a way to fix this pls
Click to expand...
Click to collapse
Did you install all necessary drivers?
Sent from my GT-I9000 using xda app-developers app
---------- Post added at 08:21 AM ---------- Previous post was at 08:17 AM ----------
farazafs said:
I took out the battery then connect it to the pc and open device manager, it show mtk65xx preloader then the phone disconnect its self and connect back every two seconds is there a way to fix this pls
Click to expand...
Click to collapse
Did you install all necessary drivers? How does sp flash tool respond when you download the recovery?
Sent from my GT-I9000 using xda app-developers app
jg77 said:
Did you install all necessary drivers?
Sent from my GT-I9000 using xda app-developers app
---------- Post added at 08:21 AM ---------- Previous post was at 08:17 AM ----------
Did you install all necessary drivers? How does sp flash tool respond when you download the recovery?
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
I can Install all necessary drivers, when I Power OFF phone and connect it to my PC, in device manager it can show MT65xx Preloader (Com 9) connected n within 3 sec it can be disconnected.... in SP Flash Tool i can select recovery then press download button... then again i can connect phone, it's give me some 80xx error. it's mean that device not connect.
farazafs said:
I can Install all necessary drivers, when I Power OFF phone and connect it to my PC, in device manager it can show MT65xx Preloader (Com 9) connected n within 3 sec it can be disconnected.... in SP Flash Tool i can select recovery then press download button... then again i can connect phone, it's give me some 80xx error. it's mean that device not connect.
Click to expand...
Click to collapse
An 80Xx error does not always mean device not connected. It can also mean there is something not right in the scatterfile (error 8038). You should take a look at the sp flash tool logfiles. You can post them here so I can have a look.
jg77 said:
An 80Xx error does not always mean device not connected. It can also mean there is something not right in the scatterfile (error 8038). You should take a look at the sp flash tool logfiles. You can post them here so I can have a look.
Click to expand...
Click to collapse
Attached snapshot given below... always when I tried to flash Recovery from SP Flash Tool it's only give me this error.
farazafs said:
Attached snapshot given below... always when I tried to flash Recovery from SP Flash Tool it's only give me this error.
Click to expand...
Click to collapse
There is something wrong in the layout of the scatterfile. Can you post the logiles of sp flash tool? Just zip them all together.
I have had the exactly the same error with my HDC Mage. I just had to rename a small section of the scatterfile and then it was all good.
hello folks,
cant root the following phone:
HTM GT-T9500
C920-V1.02
MT6589-C920-EN-V05
no xray, no z4root, no unlookroot, and so on....
also motochopper tells me "bus error"
asb by hand also no luck
anyone ever rooted such a device or has custom rom for me?
thx in advance
cu
081569 said:
hello folks,
cant root the following phone:
HTM GT-T9500
C920-V1.02
MT6589-C920-EN-V05
no xray, no z4root, no unlookroot, and so on....
also motochopper tells me "bus error"
asb by hand also no luck
anyone ever rooted such a device or has custom rom for me?
thx in advance
cu
Click to expand...
Click to collapse
did you ever figure anything out about this? i just got one of these too. im thinking i totally got RIPPED off!
1. Drivers for windows
View attachment 2262111
View attachment x86.zip
u need to install both driver for 32bits windows XP / W7. Make sure you checked your phone are detected on the device manager
2. Downloading the debug tool and extract it to your document folder
http://www.mediafire.com/download/rngukh111vqfr8h/DEBUG_TOOL.7z
3. Download Recovery img and Super User img and wipe user data pac files , unzip it and u will need it later
View attachment cwm-recovery-S9300-S3.img View attachment SuperuserAndFullBackup.zip View attachment SC6820_Wipe_userdata.7z
4. Open extracted debug tool . go in to channel server > bin > and run channel server (Important)
5. Go into ResearchDownload and run ResearchDownload
6. Click on the first logo to select pac file (SC6820_Wipe_userdata)
7. Click on the 2nd logo and unselect all selection except FDL & checking the recovery option and double click on the empty box to select the cwm-recovery-S9300-S3 file then click ok
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
8.Click Start Downloading
9. Remove your phone battery and reinsert it without power on
10. Plug in the phone to your PC while holding the volume down button
11. Research download should now detect your phone and run downloading recovery. wait for it to finish and it will show green cirle then u can unplug and remove the battery
12. put in the battery , holding power on for 2 second after that press and hole power down (-) button u will see the phone entering recovery mode
13. From the menu go in to mounts and storage select mount USB storage and plugin to your PC. from your PC copy and paste the SuperuserAndFullBackup.zip to your phone storage. After done press go back and select install zip from sd card then select SuperuserAndFullBackup.zip wait until it finish and reboot. u are now ROOTed . make a backup to incase u accidently brick the phone. u can still using the reseach tool to flash back the system.img files from the sd card.
14. WARNING . do not tyring to flash other phone pac files. this will 100% brick ur phone and u got no other way to save it .
there is no custom rom for this phone . just install chainfire3D and plugins. Use downscale texture and some games might load
http://www.4shared.com/download/Qfk...4&dsid=em9v7.b860db6214ed072c1d72ed9674685eb9
others advise do not try to enable HW decoding or composition option. you will very dissapointed with it.
calvin253 said:
there is no custom rom for this phone . just install chainfire3D and plugins. Use downscale texture and some games might load
http://www.4shared.com/download/Qfk...4&dsid=em9v7.b860db6214ed072c1d72ed9674685eb9
others advise do not try to enable HW decoding or composition option. you will very dissapointed with it.
Click to expand...
Click to collapse
Thank you!
UGH no custom roms? pff why doesnt that surprise me?
You know what... Im just going to get rid of the darn thing. This phone BLOWS! I traded my 4 things for it.. granted they were all pretty old things. But I was completely honest with the young man. 10 year old laptop in PERFECT CONDITION, ipod touch 2gen jailbroken w/cydia, craig tablet, and my htc rhyme that had been rooted and flashed to pageplus and it said had like 68mins 2000+text and 300mb data left. IM PISSED! My sons little Obama phone takes better pics than this thing. He lied to me and told me if was the i9500 version. I just glanced at the phone when we made the trade and thought okay cool. PFFF WHATEVER.. it is NOT cool at all lol.
Heck since I got it and checked it out fully... using the phone as a paper weight seems like its all it will be good for. SMH oh well. Such is life. Thank you very much for helping me out. I have some one who is fully aware what the phone is and im probably going to trade it for a HTC Evo 3d.
---------- Post added at 08:54 AM ---------- Previous post was at 08:47 AM ----------
calvin253 said:
1. Drivers for windows
View attachment 2262111
View attachment 2262116
u need to install both driver for 32bits windows XP / W7. Make sure you checked your phone are detected on the device manager
2. Downloading the debug tool and extract it to your document folder
http://www.mediafire.com/download/rngukh111vqfr8h/DEBUG_TOOL.7z
3. Download Recovery img and Super User img and wipe user data pac files , unzip it and u will need it later
View attachment 2262121 View attachment 2262120 View attachment 2262126
4. Open extracted debug tool . go in to channel server > bin > and run channel server (Important)
5. Go into ResearchDownload and run ResearchDownload
6. Click on the first logo to select pac file (SC6820_Wipe_userdata)
7. Click on the 2nd logo and unselect all selection except FDL & checking the recovery option and double click on the empty box to select the cwm-recovery-S9300-S3 file then click ok
View attachment 2262147
8.Click Start Downloading
9. Remove your phone battery and reinsert it without power on
10. Plug in the phone to your PC while holding the volume down button
11. Research download should now detect your phone and run downloading recovery. wait for it to finish and it will show green cirle then u can unplug and remove the battery
12. put in the battery , holding power on for 2 second after that press and hole power down (-) button u will see the phone entering recovery mode
13. From the menu go in to mounts and storage select mount USB storage and plugin to your PC. from your PC copy and paste the SuperuserAndFullBackup.zip to your phone storage. After done press go back and select install zip from sd card then select SuperuserAndFullBackup.zip wait until it finish and reboot. u are now ROOTed . make a backup to incase u accidently brick the phone. u can still using the reseach tool to flash back the system.img files from the sd card.
14. WARNING . do not tyring to flash other phone pac files. this will 100% brick ur phone and u got no other way to save it .
Click to expand...
Click to collapse
Im about to try this anyways... If I do happen to brick it than OH WELL. Not doing me to much good right now as it is lol.
u can always doing a backup roms before u modify any thing. but i only manage to change the speaker with the xperia x8 loud speaker. i just use it as backup incase my phone out of battery. all the damn thing i found out. this phone "suck" haha ... but it's still ok for some 480p movie.
but i just bought it @ USD 80 . So regret for it. better grab used iphone 3gs @ $120.
aprilx0x said:
Thank you!
UGH no custom roms? pff why doesnt that surprise me?
You know what... Im just going to get rid of the darn thing. This phone BLOWS! I traded my 4 things for it.. granted they were all pretty old things. But I was completely honest with the young man. 10 year old laptop in PERFECT CONDITION, ipod touch 2gen jailbroken w/cydia, craig tablet, and my htc rhyme that had been rooted and flashed to pageplus and it said had like 68mins 2000+text and 300mb data left. IM PISSED! My sons little Obama phone takes better pics than this thing. He lied to me and told me if was the i9500 version. I just glanced at the phone when we made the trade and thought okay cool. PFFF WHATEVER.. it is NOT cool at all lol.
Heck since I got it and checked it out fully... using the phone as a paper weight seems like its all it will be good for. SMH oh well. Such is life. Thank you very much for helping me out. I have some one who is fully aware what the phone is and im probably going to trade it for a HTC Evo 3d.
---------- Post added at 08:54 AM ---------- Previous post was at 08:47 AM ----------
Im about to try this anyways... If I do happen to brick it than OH WELL. Not doing me to much good right now as it is lol.
Click to expand...
Click to collapse
calvin253 said:
u can always doing a backup roms before u modify any thing. but i only manage to change the speaker with the xperia x8 loud speaker. i just use it as backup incase my phone out of battery. all the damn thing i found out. this phone "suck" haha ... but it's still ok for some 480p movie.
but i just bought it @ USD 80 . So regret for it. better grab used iphone 3gs @ $120.
Click to expand...
Click to collapse
Do I need to enable usb debugging?
Yes
calvin253 said:
Yes
Click to expand...
Click to collapse
Alrighty then im about to attempt this. I was trying to wait and trade back for my stuff but its not going to happen BOO!
YAY!! THANK YOU A MILLION TIMES!! ! GOT IT! Your the best!
ANOTHER QUESTION...
For the chainfire... should I put it on my sd card and install the zip through recovery? Or should I unzip the files and put them on my sd card and install normally? I know Chainfire is the apk but im not really sure what to do with the plug ins. I want to make sure I dont mess something up.
Please help i need backup
Please i just bricked my phone the same as yours gt t9500 and i don't have a back up can you please send me one i don't know what elese to do
thanks in advance
maromak said:
Please i just bricked my phone the same as yours gt t9500 and i don't have a back up can you please send me one i don't know what elese to do
thanks in advance
Click to expand...
Click to collapse
did you flashing others pac files ? one the uboot is gone there is no way to reverse back
custom ROM
calvin253 said:
did you flashing others pac files ? one the uboot is gone there is no way to reverse back
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2244111
this was what i tried to install i tried other stuff now the logo doesn't no more i don't know what to do
i need someone with this phone to give a full backup
thanks anyway
guys can you help me on how to get in to the recovery mode of this phone..? because i didn't get what exactly to do on how to go to recovery mode settings
cybugz said:
guys can you help me on how to get in to the recovery mode of this phone..? because i didn't get what exactly to do on how to go to recovery mode settings
Click to expand...
Click to collapse
Just remove and insert the battery, press and hold power button for 2 second then press button down together until the screen show recovery
Sent from my LG-P895 using xda app-developers app
---------- Post added at 07:27 PM ---------- Previous post was at 07:21 PM ----------
I can't help you. I don't have that phone anymore. Try ask the other guy upload for you
Sent from my LG-P895 using xda app-developers app
help!!!
i have followed all these steps (even 3 times lol) and still the phone will not go into recovery menu.....what am I doing wrong??
I have done it i unbricked it!!yeahh who's the man who's the man?? humm? you baby you
I did it after a lot of time spent i revived it
i want to thank the help of forum.china-iphone.ru portal without it i could never done it
my phone only turned on the screen no logo nothing else and only turned on when connected usb to computer and it was in loop boot mode
with research download it was done and it was all because of a beta rom novadroid that the author said it was for NovaDroid for GT-I9300
i thought the sc6820 could work with it and totally bricked the phone i almost gave up i took it to a shop and the technician said it was a spare prat burned can you imagine i didn't believe because i knew what was the prob
i done it with a pac but now it is not won the war because i have no sound no wifi and other stuff going wrong but to see it working it is a happy day i almost gave up
now i am trying to fix it and put it 100% perfect
if need help contact me with SPRD GT-T9500 sc6820
Research download
Hi people friend xda's!
when using research download don't forget uncheck in calibration menu otions
take out the battery and the button you go into download mode or recovery pu**** until put the battery again and connect the cable on windows XP
if follow these stepas most likely will work
now my problem is i put a ROM "6820_2.3.5_c920_hteng_s13_en_3d_v01_bin-3D英文130524.pac" in a GT-T9500 sc6820 the specs are in the photo post above and now i have no network no wifi the flash turns on randomly no sound!!!
if someone have the backup or original ROM please send me pleas PM or if someone know how to help me
i successfully rooted this phone with those specs using VROOT you have a english version one click root very easy
www1.datafilehost.com/d/e2841c1a (VROOT) copy paste due to the 10 post anti spammers
Thanks a lot guys
Mr Maromak i need your help .. please i need download ROM "6820_2.3.5_c920_hteng_s13_en_3d_v01_bin-3D英文130524.pac"
Please share link to download rom thanks
Link to ROM
Friend cobba here is the link you have asked hope it helps you if you have the original ROM for GT T9500 please send to me
https://docs.google.com/file/d/0B3348OEzDncJMG5FYjlYcGluQ1U/edit?usp=sharing&pli=1
---------- Post added at 04:53 AM ---------- Previous post was at 04:43 AM ----------
maromak said:
Friend cobba here is the link you have asked hope it helps you if you have the original ROM for GT T9500 please send to me
https://docs.google.com/file/d/0B3348OEzDncJMG5FYjlYcGluQ1U/edit?usp=sharing&pli=1
Click to expand...
Click to collapse
cheers
Hello
This is the process that I used to unbrick the LG G Pad 8.3 tablet.
Note 1: The operating system on my PC is Windows XP SP3 x86
Note 2: The same process should also work on LG G Pad 10.1 (With a different .tot file)
1. First of all you should make sure that the G Pad is detected when connected to the PC.
The device should be seen as QHSUSB_DLOAD in Other Devices section in Device Manager.
hxxp://i.imgur.com/IawJZq0.jpg
2. Install the QHSUSB Driver for your operating system.
The driver can be found here:
hxxp://mega.nz/#!HlpViaTJ!NPACjSQtTjGWdYIj3kHO3bGfmAotaSSQindmgRY9VJ4
I have used the driver from the "checked" folder.
Reconnect the tablet and you should now see the device as Qualcomm HS-USB QDLoader 9008 (COMxx) under the Ports section in Device Manager.
Take a note of the COM port number.
hxxp://i.imgur.com/IR7uUCB.png
3. Download the .tot image file for you tablet model.
I have used the one from here (LG G Pad 8.3 V500 4.4.2):
hxxp://androidfilehost.com/?fid=23329332407581518
4. Now you need the LG BoardDiag tool.
Download this one from here:
hxxp://mega.nz/#!XwgkXTAR!JnAAXKBQoezT7CcxRSVkSQlPFr4AXcvfm6oJbw4bht4
Please use only this one even if you have another BoardDiag. I have tried other versions and this was the only one that worked. For the other versions I always got some error:
failed during loading flash programmer
or
device not found in dload trying flash programmer
With this tool we will extract the .tot rom image first.
Unrar the archive and open BoardDiag3.99c application.
Click on the ... button next to BIN from the Image Extraction section on the bottom of the BoardDiag application and browse to the .tot file you downloaded at step 3.
Then click on the ... button next to DIR and browse to a folder to extract the files in.
Click on the Extract button and wait for the files to be extracted.
After the extraction is complete, close the BoardDiag application.
hxxp://i.imgur.com/Kw0ZhUv.jpg
5. Now we will perform some cheks on the tablet.
Open the BoardDiag application again.
Now select the AP check and EMMC TEST checkboxes from the Board Diag Test section on the top-left.
Also choose the G-pro (APQ8064) on the AP Chipset dropdown selection box. Choose the Com Port that you took a note of at step 2. Select as the Target Dir the folder where you extracted the .tot image file at step 4. These settings are in the top-right side of the BoardDiag application. Make no other changes to the settings.
Now Click on the big START button and wait for the checks to be made.
If everything is OK you should see under the Test Results section the green text PASS both under the AP and EMMC. Leave the BoardDiag application open. Now you can proceed to step 6.
6. Now we will Flash the files to the tablet.
Now you will also check the SDRAM TEST checkbox on the left top side of the BoardDiag application. The other settings were already made in step 5. Click the START button again.
After performing the checks you should see that the files from the image (aboot.mbn, boot.mbn, etc.) are written to the tablet.
After that, the BoardDiag tried to reset the tablet, but it failed and it ended with FAIL for SDRAM under the Test Results section. But the files were already written on the tablet.
7. After that I disconnected and reconnected the tablet to the PC. Nothing was detected, or so I thought, because I could see that in Device Manager something was happening. It was like refreshing itself every 5 seconds or so. I disconnected the tablet from the PC and I plugged in the wall charger. It turns out that the battery had no power.
After a few minutes the LG logo appeared on the screen. Nothing else was happening but I could see the LG logo. I left the tablet to charge the battery for at LEAST 3 hours. If your tablet battery is also discharged you should plug your tablet to the charger for at LEAST 3 hours.
After that I reconnected the tablet to the PC and it was detected as G Pad but it couldn't find the driver.
8. Install the LG Mobile Drivers.
You can get them from here:
hxxp://mega.nz/#!j8xikSYC!Njz3E1_PSJanzQEeZCbbEoWfxUz9TfrTVgusqBCJ2qY
After the driver installation reconnect the tablet to the PC.
It should now be connected properly.
9. Download LG Mobile Support Tool. You can use the launcher from here:
hxxp://mega.nz/#!bp5jgBQJ!xqiMyQU7z-ATlYz__0ybz2kM7boeLFNgqsu5XoPPSzo
Open LG Mobile Support Tool. You should now see the tablet is connected correctly and you should see the tablet model on the left side of the LG Mobile Support Tool. You will now go to Options and choose Upgrade Recovery. Wait for the image to be downloaded and flashed to the tablet.
After the process is completed the tablet will boot to life again.
Please write your comments bellow if you succeeded or failed. I will provide further assistance if required.
PS: I think you need to remove the battery and reinsert it after step 6. Or it could also work if you let the battery discharge completely.
Good luck!
I could not post the images and the links.
I will add them later (after I get to 10 posts).
Contact me on skype (cyadron) for the files and for other help.
nice finding.
it can be handy if we try to flash the v510 bootloader on the v500 to see if it fits and "unlocks" the pad
ckret said:
nice finding.
it can be handy if we try to flash the v510 bootloader on the v500 to see if it fits and "unlocks" the pad
Click to expand...
Click to collapse
Actually it was the only way I found that worked to unbrick this tablet.
Bricked LG G Pad
Need your help man with those files. I bricked my device after flashing wrong file. I have tried LG G2 Pro Board Diag tool and everything passes except SDRAM.
Thanks in advance for your assistance.
Links for files
Hi, I bricked my GPad and would be very interested in getting the proper files or links. How can I get them?
I will update this thread as soon as I can post links. Hopefully no more than a few days.
cyadron said:
I will update this thread as soon as I can post links. Hopefully no more than a few days.
Click to expand...
Click to collapse
Can you post links ?
This sounds very promising @cyadron, hopefully you'll be able to edit the links in soon.
@muiriddin this sounds like you should be able to revive your tablet from your science experiment.
@fefifofum posting here instead of the other thread as that would be way off topic for it.
This sounds like we'll be able to do some proper experimenting and still be able to recover if it doesn't work!
Hopefully I will be able to post the links soon. Does anyone know the minimum number of posts required to post links?
cyadron said:
Hopefully I will be able to post the links soon. Does anyone know the minimum number of posts required to post links?
Click to expand...
Click to collapse
Just put hxxp instead of h t t p.
roirraW "edor" ehT said:
Just put hxxp instead of h t t p.
Click to expand...
Click to collapse
Thank you. That worked.
Links have been added.
cyadron said:
Thank you. That worked.
Links have been added.
Click to expand...
Click to collapse
This thread should probably be pinned. You can request the moderators to do so by "reporting" your first post and ask them there. Too bad, as far as I know, there aren't any TOTs available for the VK810, although I haven't needed one yet.
I used the tutorial, but accuses ero Emmec test fails
Any solution?
edsmat said:
I used the tutorial, but accuses ero Emmec test fails
Any solution?
Click to expand...
Click to collapse
Unless there is a hardware problem with the emmc, it should work.
Try and remove the battery and put it back again.
Please also make sure you follow the steps as described.
Cluey said:
This sounds very promising @cyadron, hopefully you'll be able to edit the links in soon.
@muiriddin this sounds like you should be able to revive your tablet from your science experiment.
@fefifofum posting here instead of the other thread as that would be way off topic for it.
This sounds like we'll be able to do some proper experimenting and still be able to recover if it doesn't work!
Click to expand...
Click to collapse
It would be nice to get my science experiment working again... I hopefully will have some time to follow this process this weekend...
hi, i have hardbrack v410 no have screen at all only qualcomm hs_usb 9008 please help me (
lgv410 said:
hi, i have hardbrack v410 no have screen at all only qualcomm hs_usb 9008 please help me (
Click to expand...
Click to collapse
Read everything you can and follow instructions.
I think you'll need to search further than just this thread though. I read about someone recovering an LG device from this state but I think it was a phone.
But you'll need to find it and follow the instructions, I don't remember where I read it.
Cluey said:
Read everything you can and follow instructions.
I think you'll need to search further than just this thread though. I read about someone recovering an LG device from this state but I think it was a phone.
But you'll need to find it and follow the instructions, I don't remember where I read it.
Click to expand...
Click to collapse
thank you for you answer, can you show me where i can found this instructions to fix this problem? :/
lgv410 said:
thank you for you answer, can you show me where i can found this instructions to fix this problem? :/
Click to expand...
Click to collapse
No, I'm not here to do searches for you.
Hello....I bricked my I927 when I accidently formatted my efs partition when using EFS professional .....my phone boots in download mode.....but only boots till samsung logo screen.....I tried various things like installing stock GB and ICS through odin and installing custom firmware but phone boots onle till samsung logo and then lights up with sone stange colored thin lines and screen goes off.....In TRWP I get a "unable to mount preload" error whenever I try to install somethiing.....I suspect that the EFS partiton is corrupted and needs to be repartioned....I had backupped the efs folder when my phone was working before.....its in a tar format.....I read somwhere that someone made a recovery.zip out of his backedup EFS.IMG and flashed it with CWM solved his problems which were exactly similar to mine.....can somebody on the forum make a recovery.zip for I927 with update binary and script so that I can add the backedup EFS image to it and flash it with CWM? Please.....this would also help many others who are facing similar issues.....and also what do I do regarding the "unable to mount preload" error? I need to repartition and tried to install hemdall.....but get the common .dll error even after following all the instructions and installing C++ 2010.....
Hi, k one thing after the other.
Do you have repartitioned anything?
Do you have adb in place and does adb works when in TWRP?
The easiest thing would be to connect by adb then mount /efs and then restore the efs backup. The good is that you will have a good chance to recover your device. Maybe you need to reformat /efs but that depends.
Which timezone do you live? Maybe a Teamviewer session would be helpful?
.
Thank you for your reply sir...
THANKS FOR THE REPLY SIR....YES I WAS ABLE TO GO INTO CWM RECOVERY AND CONNECT THE PHONE WITH MINIMAL ADB FASTBOOT.....AND AFTER SPENDING ALMOST 2 DAYS CONTINUOUSLY TRYING TO FIND THE PROBLEM USING GOOGLE, I TRIED DIFFERENT COMMANDS ON ADB TO GET EFS BACK OJ THE PHONE....BUT WITH NO SUCCESS...... MY EFS BACKUP IS IN TAR FORMAT......IT WAS MADE USING GALAXYSIMUNLOCK BY SPOCKY.....I LATER TYPED IN 'ADB MESG'.....OR SOMETHING SIMILAR TO THAT COMMAND, AND FOUND OUT THAT ALL THE PARTITIONS ON mmcblk0 were mangled up with strange letters.....for eg, p1, p2, p3 and so on had strange characters written next to them.....SO I TRIED TO RE-PARTITION THE WHOLE THING WITH SDPARTED......AND IT RE-PARTIONED THE SYSTEM (AROUND 7000MB).....MMCBLK01 (AROUND 500MB).....AND ANOTHER THING I CANT REMEMBER NOW.....BUT WHEN IT FINISHED THE JOB, IT GAVE ME A mmcblk02 ERROR.....AND WHEN WHEN I CHECKED MY PHONE ON CWM SCREEN, IT GAVE ME A LIST OF CACHE ERRORS.....AND WHEN I SWITCHED OFF THE PHONE AFTER THAT IT REFUSED TO POWER ON.....IT WAS NOT EVEN GOING INTO DOWNLOAD OR RECOVERY MODE.....BATTERY HAD ENOUGH POWER....SO ITS NOT BATTERY FAULT......I SUPPOSE THAT SINCE THE PARTITIONS WERE FORMATTED THE PHONE BECAME COMPLETELY DEAD......CAN YOU TELL ME IF THERE IS ANY WAY WHERE I COULD GET THE COMPUTER TO RECOGNIZE MY PHONE USING A 'DEAD PHONE USB FLASH' OR SOMETHING.....AND THEN FLASH A BLANK BOOTLOADER AND THEN WRITE CWM?
I LIVE IN INDIA SIR.....+5.30 GMT.....I DO NOT KNOW ANYTHING ABOUT TEAMVIEWER.....IS IT AN ANDROID APP? CAN YOU EXPLAIN MORE IN DETAIL SIR?
PLEASE LET ME KNOW HOW TO GET THE COMPUTER TO RECOGNIZE THE PHONE AGAIN......
Well.. that sounds not that good...
Teamviewer (www.teamviewer.com) is an easy to use and free remote control software for your PC (it runs on both Linux and Windows). We could do a remote control session if you like. I can try to help but cannot promise anything.
I live in Germany: GMT +1. Send me a PM if you want to give that a try. Next Monday. Tuesday or Thursday would be possible on my site. At least for getting a short overview.
.
Thank you sir,
Thanks for the reply Sir.....I believe using teamviewer requires a internet connection with good amount of data.....I have an extremely slow 2G internet connection here in India.....I searched google to find some solution for the bricked I927......and came across many posts where people have used the 'unbrick.img' which was specifically made for their samsung phone models on their SD cards to resurrect their dead phones.....The method involves creating a 'unbrick.img' with emmc files extracted from another working I927 and then writing the image on an external SD card with some linux commands or win2image software and then inserting the SD card into the dead phone and switch it on by which it goes to download mode.....once in download mode I can flash CWM or TWRP and also flash stock firmware through odin and recover the phone.....Since your a developer who is well versed in things pertaining to this, can you make a unbrick.img file for the I927 and upload it here Sir? It will be very helpful for others also on the samsung glide subforum, as there is no proper 'hard unbrick' thread for the glide on xda......Ill be very grateful and thankful to you for all your help Sir.....
alvcross said:
Thanks for the reply Sir.....I believe using teamviewer requires a internet connection with good amount of data.....I have an extremely slow 2G internet connection here in India.....I searched google to find some solution for the bricked I927......and came across many posts where people have used the 'unbrick.img' which was specifically made for their samsung phone models on their SD cards to resurrect their dead phones.....The method involves creating a 'unbrick.img' with emmc files extracted from another working I927 and then writing the image on an external SD card with some linux commands or win2image software and then inserting the SD card into the dead phone and switch it on by which it goes to download mode.....once in download mode I can flash CWM or TWRP and also flash stock firmware through odin and recover the phone.....Since your a developer who is well versed in things pertaining to this, can you make a unbrick.img file for the I927 and upload it here Sir? It will be very helpful for others also on the samsung glide subforum, as there is no proper 'hard unbrick' thread for the glide on xda......Ill be very grateful and thankful to you for all your help Sir.....
Click to expand...
Click to collapse
Ok I have made one. It want to say it was VERY hard to find the correct instructions to do so and therefore I'm absolutely not sure if that will work for you!
Test it if you like but again: I have no idea if that would damage anything more than it is now!
See --> http://forum.xda-developers.com/cap...od-unbrick-debrick-hard-bricked-i927-t3285505
If it worked for you (would be like a miracle) then please report back!
If it does NOT work for you please report back, too!
thanks
xdajog
.
UPDATE:
Besides the link I posted --> Could you please also try the following:
1) Power on your device and directly after that:
2) Press and hold down Vol Up + Vol Down (both the same time)
3) You should see a warning message like the attached one which is the APX mode
4) you need to release the vol buttons immediately after you see the APX mode otherwise it will continue to the non working download mode.
Does teamviewer require internet connection with a lot of data?
Thanks for the reply Sir.....I believe using teamviewer requires a internet connection with good amount of data.....I have an extremely slow 2G internet connection here in India.....I searched google to find some solution for the bricked I927......and came across many posts where people have used the 'unbrick.img' which was specifically made for their samsung phone models on their SD cards to resurrect their dead phones.....The method involves creating a 'unbrick.img' with emmc files extracted from another working I927 and then writing the image on an external SD card with some linux commands or win2image software and then inserting the SD card into the dead phone and switch it on by which it goes to download mode.....once in download mode I can flash CWM or TWRP and also flash stock firmware through odin and recover the phone.....Since your a developer who is well versed in things pertaining to this, can you make a unbrick.img file for the I927 and upload it here Sir? It will be very helpful for others also on the samsung glide subforum, as there is no proper 'hard unbrick' thread for the glide on xda......Ill be very grateful and thankful to you for all your help Sir.....
alvcross said:
Thanks for the reply Sir.....I believe using teamviewer requires a internet connection with good amount of data.....I have an extremely slow 2G internet connection here in India.....I searched google to find some solution for the bricked I927......and came across many posts where people have used the 'unbrick.img' which was specifically made for their samsung phone models on their SD cards to resurrect their dead phones.....The method involves creating a 'unbrick.img' with emmc files extracted from another working I927 and then writing the image on an external SD card with some linux commands or win2image software and then inserting the SD card into the dead phone and switch it on by which it goes to download mode.....once in download mode I can flash CWM or TWRP and also flash stock firmware through odin and recover the phone.....Since your a developer who is well versed in things pertaining to this, can you make a unbrick.img file for the I927 and upload it here Sir? It will be very helpful for others also on the samsung glide subforum, as there is no proper 'hard unbrick' thread for the glide on xda......Ill be very grateful and thankful to you for all your help Sir.....
Click to expand...
Click to collapse
Uhm do you have read my above post??
.
1927 wouldn't boot.....Help.
Ohhhh Thank you.....thank you.....thank you for your kind reply Sir.....how good of you to take all your precious time to help me.....I greatly appreciate all your hard work Sir.....wonderful...*.I wanted to download your img file to try it out and when I read the reply of brother Bubor, that the I927 woudnt boot from the SD card when the bootloader is bricked, I was very disappointed. Like I said before, I have a very very slow internet connection with very less data left....and according to brother bubor's reply I doubt this will work....It looked like he was sure that it wont work....I tried to get into APX mode as the link that brother bubor posted had mentioned, but no luck, as the phone is not going into APX mode.....I remember that when I was trying to get to the APX mode the first time, the computer flashed a notification that the APX driver was not successfully installed.....but after that I tried the method more than a dozen times, but the computer was not recognizing the phone to go into APX mode.....Does the phone go into APX mode when the full internal phone system is formatted? I tried your second method on trying to get to APX mode, but nothing happens.....the computer is not recognizing the phone.....The battery had about 30% power in it when the phone got bricked 2 weeks ago.....Dont know if the battery drained all these days of not using the phone.....And even if I get to the APX mode, I have no idea how to proceed from there to repartition the internal phone system and get back download mode.....In the link that brother bubor posted the person who made the thread has made some files to be used when one gets into APX mode.....The PIT and emmc files which are necessary for repartitioning the system and getting the bootloader work are found in that zip file.....But that zip file is for the I9103 Galaxy R.....there isnt something like that available for the I927 yet.....And is brother bubor sure that the unbrick.img file wont work on the I927?
Give it a try with my unbrick image.
we all don't know.
.
xdajog said:
Give it a try with my unbrick image.
we all don't know.
.
Click to expand...
Click to collapse
Hi @alvcross: any update on this?
have you tried the SD card unbrick?
You said you cannot open the APX mode but what happens when you press the buttons for accessing the APX mode?
Try it even if you see a blank screen and then connect your Cappy with USB to your computer --> you should get a message about a missing driver or similar.
If that works I tell you how to proceed.
xdajog said:
hi @alvcross: Any update on this?
Have you tried the sd card unbrick?
You said you cannot open the apx mode but what happens when you press the buttons for accessing the apx mode?
Try it even if you see a blank screen and then connect your cappy with usb to your computer --> you should get a message about a missing driver or similar.
If that works i tell you how to proceed.
Click to expand...
Click to collapse
im so sorry that i was missing in this thread for a long time now sir.....i have had some issues at home and they have been sorted out lately.....yes sir.....i tried the sd card unbrick image....but my nothing happens.....when i try to hold volume up+power+home buttons and insert usb cable into my computer it says installing drivers and then says drivers failed to install....and nothing happens further.....can you help sir?
alvcross said:
im so sorry that i was missing in this thread for a long time now sir.....i have had some issues at home and they have been sorted out lately.....yes sir.....i tried the sd card unbrick image....but my nothing happens.....when i try to hold volume up+power+home buttons and insert usb cable into my computer it says installing drivers and then says drivers failed to install....and nothing happens further.....can you help sir?
Click to expand...
Click to collapse
Ok so you may try to install the special apx drivers now. Unfortunately I'm on vacation right now so I cannot upload them elsewhere. I come back to you next week.
Sent from my LG-H815 using XDA-Developers mobile app
xdajog said:
Ok so you may try to install the special apx drivers now. Unfortunately I'm on vacation right now so I cannot upload them elsewhere. I come back to you next week.
Sent from my LG-H815 using XDA-Developers mobile app
Click to expand...
Click to collapse
Oh yes Sir....Ill be waiting for the special apx driver package from you....Thank you so very much Sir.....God bless you.....
alvcross said:
Oh yes Sir....Ill be waiting for the special apx driver package from you....Thank you so very much Sir.....God bless you.....
Click to expand...
Click to collapse
No guarantee ! [emoji121]
Sent from my LG-H815 using XDA-Developers mobile app
xdajog said:
No guarantee ! [emoji121]
Sent from my LG-H815 using XDA-Developers mobile app
Click to expand...
Click to collapse
Yes Sir....I understand....
alvcross said:
Yes Sir....I understand....
Click to expand...
Click to collapse
Ok could you please try these driver package here: http://forum.xda-developers.com/galaxy-nexus/development/adb-fb-apx-driver-universal-naked-t1379875
Follow the instructions there for installing
The next step (if the driver would work for you) will be to flash a working PIT to your device to make sure you are using the correct partitions.
Afterwards we will flash the bootloader (may absolutely brick your device if not done correctly) and then --> if all goes fine --> you should be able to flash in download mode whatever you want to.
So it is still a long way to go and I need to check all the steps first before actually we can proceed.
That may take longer so do not expect that this will be something in the next days.. sorry.
Update:
If the above universal driver do NOT work for you: Test these one here View attachment apx_driver_samsung.zip
.
Thanks for the speedy reply Sir......Ill do as you said and let you know Sir......thank you.....thank you.....thank you Sir....
wooowwww......windows installed the drivers for the phone and it shows up as "NVIDIA usb boot-recovery for mobile devices." But when I open minimal adb and fastboot and type 'adb devices' the phone doesn't show up in the 'list of devices attached'....the line after 'list of devices attached' is just empty.....Also the phone doesnt show up in odin....what should I do next Sir?
alvcross said:
wooowwww......windows installed the drivers for the phone and it shows up as "NVIDIA usb boot-recovery for mobile devices." But when I open minimal adb and fastboot and type 'adb devices' the phone doesn't show up in the 'list of devices attached'....the line after 'list of devices attached' is just empty.....Also the phone doesnt show up in odin....what should I do next Sir?
Click to expand...
Click to collapse
nvidia apx isnt fastboot/adb device. You can found tool on nvidia site ( more info https://ac100.grandou.net/nvflash ), this tool can read and write whole flash.
Before you could use nvidia's tool, you must send an uniq blob to your phone. APX mode is useless without this blob.
This blob is uniq for every phone.
In this guide, I will show how to how to change from LVM to Chinese unification storage method. Windows OS Only.
This guide is specifically for Oppo Find 7(A/S).
The idea of changing to chinese unification storage method is to have access to 8.1 Android operating system and future Android OS builds.
Please follow these following steps in order be able to run 8.1 Android on your OPPO Find 7.
1) Back up only your internal storage because after you flash the following tools, the internal storage will be wiped completely.
2) Download this file (for OPPO Find 7s) and this file (for OPPO Find 7a) then run the following steps:
Extract the files, and locate the QcomMtk_Driver_Setup.exe (*install this driver*) and reboot your computer system.
After rebooting, take off the battery off the Oppo find 7 and press the volume up button and connect to the PC using a micro USB cable. Go to the device manager, open the ports tab and there should be something like qualcomm etc. If there is no warning sign then you are fine and you should proceed along the steps. If there is a warning sign, just right click on the driver and update by letting windows finding the appropriate drivers.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then go back to the folder where you extract the zip file and locate (X9077_Android5.0_32G_20150520.exe) or X9007 respectively and run as administrator. rights only.
Agree with the licence. As shown in the image.
Now, again, make sure your battery is removed, hold volume up button and connect to the pc.
Click the first top left button as indicated in the image below.
Now, the software should do the rest so please be patient and wait until the green line has finished and the timeclock down on the bottom right as come to a halt.
After the green line has finished, please remove your device and plug back your battery. Let the device fully boot up before moving on the following steps.
After you get to the setup screen. Press and hold the power off button and shutdown fully before going back to the fast boot mode by pressing volume up and power button at the same time, the battery needs to be installed this time.
-
Now, flash the twrp modded image using fast boot flash and download the two files fastboot and twrp-modded img :
1) Have your phone in bootloader mode. (Turn off your phone, press volume up button and power button together and connect usb).
2) Navigate to the folder and click on the top left of the folder and copy that. e.g C:\Users\samgi\Desktop\platform-tools
3) Open cmd and type in: cd C:\Users\samgi\Desktop\platform-tools
4) In cmd type in: fastboot flash recovery image-modded.img
4) Remove USB and press power button and volume down button simultaneously.
-After you have flashed the recovery, boot into recovery and store the ROM, GAPPS and cm13 unified patch in the external sd card using your USB.
Download your favourite 9.0 ROM:
crDroid for example: https://androidfilehost.com/?w=files&flid=262369
Install GAPPS (only pico):
http://opengapps.org/
After you have downloaded all the files rom gapps cm13 patch etc. Make sure to flash each of the zip files one by one:
1) Flash ROM
2)Flash Pico Gapps
3)Flash CM13 Patch here
So basically, just head over to https://download.lineageos.org/find7 and download the latest Lineage OS 16 ROM. Then download the MindTheGapps (since pico OpenGapps can't work) from https://androidfilehost.com/?w=files&flid=170282 make sure to get 9.0.0arm.
Reboot to recovery, wipe the dalvik, system and cache. Then proceed with installing the the LOS 16 ROM. After that, you can flash the CM 13 patch and the gapps (MindTheGapps). It's ok to do gapps first before the CM 13 patch. I noticed that it makes no difference. Works the same every time.
Well, that's about it, reboot and enjoy. OTA should work after this. I think.
Good luck.
Then, simply clear cache and boot to your 9.0 OS. P.S don't forget to restore your data that you deleted in step one.
Optional: If you want to go back to Color OS or you have hard-bricked your OPPO Find 7(A/S) this tool will help you get back to stock firmware.
STOCK FIRMWARE (LVM)
Here are the instructions to unbrick your phone:
This is going to be a step by step guide on how to unbrick your OPPO FIND 7 (A/S)
Before attempting this guide, Windows is needed to be in "Test Mode".
To do this:
1) Open CMD with admin rights, and type "bcdedit /set testsigning on" without the colons.
2) Restart your computer.
End result:
This will check if this guide is applicable.
Note: Make sure your device has at least 70% battery. Charge it for an hour or so if you are not sure about the amount of battery left.
Note 2: I'll assume you are an admin of the computer you are using.
1) Disconnect your device from your charger/computer, etc.
2) Take out the battery and wait for 5 seconds.
3) Put the battery back in, hold the Power+Volume Up buttons and plug it into the computer.
4) Release your hands, and go to Device Manager. (How to go to device manager below)
1. Click the start menu
2. Right click Computer (Right hand side)
3. Click Properties
4. On the left hand side, click on Device Manager
5) Under Ports, you'll see either QHSUSB_BULK or Qualcomm *blah blah blah* 9006/9008
If you don't see any of the three, you're doing it wrong (Probably).
If you're not seeing it, try connecting your device without the battery.
Next, we uninstall the drivers. Simple enough.
WARNING: This part is only for people seeing Qualcomm 9006/9008 in Device Manager.
1) Uninstall the driver. (Right click your device, then click Uninstall. If prompted, delete driver software too)
2) Unplug your device.
3) Take out the battery and wait for 5 seconds.
4) Put the battery back in, hold the Power+Volume Up buttons and plug it into the computer.
5) Release your hands, and go to Device Manager.
You should see QHSUSB_BULK, if not, you might be doing it wrong.
Now we install the proper drivers.
NOTE: You should be seeing QHSUSB_BULK in your Device Manager, if not you're doing it wrong.
1) Download the Find 5 Drivers and unzip the file anywhere.
2) Right click on your device showing QHSUSB_BULK and click on Update Driver Software.
3) Click on "Browse my computer for driver software", and select the folder in which you extracted the drivers to.
4) It will install automagically. If prompted, click on Install the driver anyway.
After installing, your device should say Qualcomm *blah blah blah* 9006/9008.
The moment all of you have been waiting for. Unbrick!
NOTE: Your device should be connected at all times.
1) Download the tool that will save you below.
2) Extract the contents from the zip file.
3) Open the .exe file with admin rights.
4) There should be a line that is visibly different from others.
5) If there is, click start and wait till that line turns green. (It takes a few minutes. Generally nothing should go wrong at this stage.) If there isn't, you're doing it wrong.
6) After the line turns green, unplug your device and hold the power button until you see the Oppo logo.
7) If all goes well, you should be booted to ColourOS v1.2.5i.
If everything went through smoothly, you should be unbricked and ready to brick your device again.
Special thanks to:
@tashimotor https://forum.xda-developers.com/showpost.php?p=64149659&postcount=3
@Manas1796 thread: https://forum.xda-developers.com/find-7/general/7-dead-development-oppo-7-terminated-t3764649
@crdroid
@ akmlfhm https://forum.xda-developers.com/find-7/help/how-to-debrick-unbricka-oppo-7-7a-t3717802
@play8oy
A very helpful thread, my friend! Thanks for keeping us up to date that this is possible!
Glad to see a detailed method of Unification! Can't wait till you post one for the Find 7a
5ufy9n said:
Glad to see a detailed method of Unification! Can't wait till you post one for the Find 7a
Click to expand...
Click to collapse
Sure, I will let you know once I upload the file to Google Drive. :fingers-crossed:
Nice... looking this step... because last i try switch lvm to chns unified.. got bricked
So my question is ....
1. Support for find7 with this model X9076? Because the file download is X9077
2. What windows u running when u doing this?
3. Is possible support for windows 10.1 64 bit?
4. any suggest what custom rom ?
Cant wait u reply.....
Tq....
itmdn said:
Nice... looking this step... because last i try switch lvm to chns unified.. got bricked
So my question is ....
1. Support for find7 with this model X9076? Because the file download is X9077
2. What windows u running when u doing this?
3. Is possible support for windows 10.1 64 bit?
4. any suggest what custom rom ?
Cant wait u reply.....
Tq....
Click to expand...
Click to collapse
Sorry for the late reply,
Don't worry, I will upload the tool also that I managed to download when oppo forums was running and luckily saved that on my hard drive :') so if you do brick your phone, the software will put you back to default X9076 color OS software mode so you're safe.
1. This guide is for Oppo Find 7s. The 8.1 android OS does not recognise X9076 (LVM) and shows "encryption unsuccessful" whenever you boot into the OS. However, when your phone shows X9077 (Chinese unified method) the 8.1 recognises and lets you boot successfully. I'm not quite sure why OPPO had to make this sooooo confusing. Lol.
2. I am running the latest Windows 10 Anniversary Update.
3. I'm not sure what you're asking ? It does not matter 32-bit or 64 bit
4. I'm literally running CrDroid and its amazing, the latest update just got out online check it out.
Let me know if you need further help.
brownboy1289 said:
Sorry for the late reply,
Don't worry, I will upload the tool also that I managed to download when oppo forums was running and luckily saved that on my hard drive :') so if you do brick your phone, the software will put you back to default X9076 color OS software mode so you're safe.
sorry, is this your mean u will upload the X9076_Android5.0_32G_20150520 version?
or you are saying that files at OP is working for X9076 and X9077 ?
sorry .... cant wait anymore ... really need switch from lvm to chns unified and taste the Android 8.1
tq
Click to expand...
Click to collapse
i success do it, but now i got new problem, at my storage sdcard0 corrupted, tried format still no luck.
any help or suggestion ?
tq
---------- Post added at 08:33 AM ---------- Previous post was at 07:56 AM ----------
itmdn said:
i success do it, but now i got new problem, at my storage sdcard0 corrupted, tried format still no luck.
any help or suggestion ?
tq
Click to expand...
Click to collapse
already solved.
first try ... got problem sdcard0 corrupt.
so i do this step, boot to twrp, flash removesetuplvm.zip - done
repeat again the guide at OP and now sdcard0 corrupted problem is gone.
now ... time for me taste android 8.1 and restore all my data
tq for this guide
itmdn said:
i success do it, but now i got new problem, at my storage sdcard0 corrupted, tried format still no luck.
any help or suggestion ?
tq
---------- Post added at 08:33 AM ---------- Previous post was at 07:56 AM ----------
already solved.
first try ... got problem sdcard0 corrupt.
so i do this step, boot to twrp, flash removesetuplvm.zip - done
repeat again the guide at OP and now sdcard0 corrupted problem is gone.
now ... time for me taste android 8.1 and restore all my data
tq for this guide
Click to expand...
Click to collapse
I'm glad that it is working for you. :fingers-crossed::good:
Let me know if you have any problems
Sorry for those waiting on the OPPO FIND 7a files, I have really slow upload speed.
5ufy9n said:
Glad to see a detailed method of Unification! Can't wait till you post one for the Find 7a
Click to expand...
Click to collapse
Up and running: https://drive.google.com/file/d/1h74LKVucM4RoBJ-Bsgkmzdavzn_MbtPY/view?usp=sharing
Can some post thread in this xda where is crdroid oreo discussion? Because i have strange problem with crdroid...
Tq
itmdn said:
Can some post thread in this xda where is crdroid oreo discussion? Because i have strange problem with crdroid...
Tq
Click to expand...
Click to collapse
What's the problem? I think they had a 7.1 forum but I'm not sure if it's closed
If 7.1 i think no connection on this 8.1 version, right? But if u dont mind i wanna ask if u have this issues.
My problem is weird ....
1. Press long at recent button will appear some apps that we have opened.. at the top have lock button, right? I already press that button become lock. But that make it permanent... in no time will be unlock.
2. Last night when i sleep i leave my phone idle with battery 100%, at morning i woke up and see my phone low batt with 13%. Weird draining battery so fast. Nothing running only some email and chat that i haven' t read. Maybe the notification light?
Tq.
itmdn said:
If 7.1 i think no connection on this 8.1 version, right? But if u dont mind i wanna ask if u have this issues.
My problem is weird ....
1. Press long at recent button will appear some apps that we have opened.. at the top have lock button, right? I already press that button become lock. But that make it permanent... in no time will be unlock.
2. Last night when i sleep i leave my phone idle with battery 100%, at morning i woke up and see my phone low batt with 13%. Weird draining battery so fast. Nothing running only some email and chat that i haven' t read. Maybe the notification light?
Tq.
Click to expand...
Click to collapse
The first problem I'm not sure lol ?
The second problem is maybe most likely of background apps turn off any background apps that might be running i.e apps that run constantly Facebook Instagram others. One recommendation to turn off Wifi and mobile data so there is no data incoming/outgoing when you go bed.
brownboy1289 said:
The first problem I'm not sure lol ?
The second problem is maybe most likely of background apps turn off any background apps that might be running i.e apps that run constantly Facebook Instagram others. One recommendation to turn off Wifi and mobile data so there is no data incoming/outgoing when you go bed.
Click to expand...
Click to collapse
Maybe my english bad hehehehhe
I already attach the pic for first problem....
I cant make it stick locked ... in some how it will unlock itself... weird...
Also i cant play Mobile Legends anymore always force-close lol
Tq
That,s weird battery usage. When I leave a 100% battery at night, next morning ( about 8 hours) I have about 90+% left, and I leave WiFi and mobile data on all night. Though I use Servicely and Project Skynet Raising.
itmdn said:
Maybe my english bad hehehehhe
I already attach the pic for first problem....
I cant make it stick locked ... in some how it will unlock itself... weird...
Also i cant play Mobile Legends anymore always force-close lol
Tq
Click to expand...
Click to collapse
This is a strange problem I'm not quite sure how to help... sorry
Omg so frustrating ..... battery really draining... lol. In 1 day i can charge 3x .... any suggest official custom rom with android 8.1 for find 7s?
Tq
itmdn said:
Omg so frustrating ..... battery really draining... lol. In 1 day i can charge 3x .... any suggest official custom rom with android 8.1 for find 7s?
Tq
Click to expand...
Click to collapse
Best advice would be to reflash the ROM with pico gapps or at last change to another 8.1 ROM i.e lineage rom or omni 8.0