UNLOCK s3 sprint :c - Sprint Samsung Galaxy S III

How to unlock my s3 sph l710 of sprint? HELP ME PLEASE

Tonfufo10 said:
How to unlock my s3 sph l710 of sprint? HELP ME PLEASE
Click to expand...
Click to collapse
Unlock as in use for a Sim card carrier? Not possible...you can use ting or straight talk CDMA but youll only really get 3g

REV3NT3CH said:
Unlock as in use for a Sim card carrier? Not possible...you can use ting or straight talk CDMA but youll only really get 3g
Click to expand...
Click to collapse
Nothing some PRL flashing could fix?

kalala said:
Nothing some PRL flashing could fix?
Click to expand...
Click to collapse
CDMA flashing and gsm unlock are 2 very different things bud

There's a thread in here somewhere that shows you how step by step I just don't know where
Nd8 deodexed Rooted and modded

Robalboa said:
There's a thread in here somewhere that shows you how step by step I just don't know where
Nd8 deodexed Rooted and modded
Click to expand...
Click to collapse
A bit off-topic but with my recent struggles with trialing different PRLs, I decided to try a debloated TW ND8 ROM so I can use the dialer to change PRLs quicker, compared to CM where I have to wipe and reflash.
Is there a list of TW things that can be safely deleted using Titanium Backup to make it run nearly as slim as CM or SlimKat does?
I saw your sig and had to ask.

kalala said:
A bit off-topic but with my recent struggles with trialing different PRLs, I decided to try a debloated TW ND8 ROM so I can use the dialer to change PRLs quicker, compared to CM where I have to wipe and reflash.
Is there a list of TW things that can be safely deleted using Titanium Backup to make it run nearly as slim as CM or SlimKat does?
I saw your sig and had to ask.
Click to expand...
Click to collapse
Here's an old post.
http://forum.xda-developers.com/showthread.php?t=1913428
Sent from my SPH-L710, using Tapatalk 2 Cyan. ND8. Rooted and rom'd with WICKED-X (HELLS YA!)

kalala said:
A bit off-topic but with my recent struggles with trialing different PRLs, I decided to try a debloated TW ND8 ROM so I can use the dialer to change PRLs quicker, compared to CM where I have to wipe and reflash.
Is there a list of TW things that can be safely deleted using Titanium Backup to make it run nearly as slim as CM or SlimKat does?
I saw your sig and had to ask.
Click to expand...
Click to collapse
Or here's a newer one- http://forum.xda-developers.com/showthread.php?t=2742937
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My ROM: WICKED X

Related

Need help finding compatible ROM

Ok so I have US Cellular's version of the Samsung Galaxy SII Epic 4g Touch (SCH-R760).
Long story short I messed up my build.prop folder and am stuck in a bootloop. I'm trying to find the stock ROM to flash with ODIN for my model but cant find it because its an obscure model. Does anyone know where I can find the stock SCH-R760 ROM, or a ROM compatible with my phone?
I'd even be cool with a custom ROM like Cyanogenmod, as long as its able to be flashed via ODIN and is compatible with my phone. Thanks in advance!
http://teamuscellular.com/Forum/index.php?/topic/1525-stock-odin-files/
here ya go
thank you so much! worked like a charm. i really appreciate the help. i made sure to save the rom files to my computer as well as performing a nandroid backup to prevent this from happening again. also, i was wondering if theres a stable ICS rom compatible for my phone yet. i searched around for it, but i dont trust my judgement.
If not ICS, what is a good souped-up fast custom ROM?
Can't go wrong with calk's E4GT EL29 ROM. http://forum.xda-developers.com/showthread.php?t=1332837
Sent from my SPH-D710 using Tapatalk 2
do not flash any of the e4gt roms. even though our phones are similar, they're not an exact match. don't do it.
So then what custom roms CAN i flash?
Khilbron said:
Can't go wrong with calk's E4GT EL29 ROM. http://forum.xda-developers.com/showthread.php?t=1332837
Sent from my SPH-D710 using Tapatalk 2
Click to expand...
Click to collapse
What a great help you are.
NCasasanto said:
So then what custom roms CAN i flash?
Click to expand...
Click to collapse
Ones that are made for your phone, obviously. Not gonna find them here though. Your phone is new and on a smaller carrier so development is going to be slow. I'm sure if you give it some time there will be a few ROMs that pop up. Just enjoy the stock ROM for now- root it, debloat it, toss some tethering into the mix. You'll be fine.
That link I put up has all the custom stuff I could find for your phone. Mainly CM7, CM9, Miui and AOKP.
http://teamuscellular.com/Forum/index.php?/forum/255-galaxy-s-ii-development/
Thanks again guys. Sorry Root i didnt realize that was on that thread i shouldve read the whole thing. Im good for the time being. Metalhead ive done all that so far rooted, debloated tether installed, and minor build.prop tweaks. I appreciate all the responses!
So it would seem that my gps doesnt work now. Any suggestions? Maybe an update/zip that ibcan flash via cwm?
CM 11
I have an sch-r760 on Alltel. I am running dastin1015's Villuminati CM 11 for the D-710. It is running flawlessly. I have voice/text/mms/data all working.
Any D710 ROM will work
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

[Q] What Next after rooting

Just want to say this my first time rooting a device etc, this is pretty new to me. So I followed the steps in this thread to root my totally stock Sprint LGOG ZV9. I rooted with no problem. No I just want to know do I need to backup my current config, what software would I use. Also was the boot loader unlocked. I Just want to make sure that I do exactly what is supposed to be done correctly. Are there custom roms for lgog currently.
Just an image showing phone was rooted
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am assuming this software was installed when I rooted the phone
Phone firmware info
Oh just figured Id show some great 4g speeds I get from Sprint at my house !! These speeds are very consistent at my house and you can see there isnt anu WIFI on just my Sprint Data. I am moving in the next month or so though. Its crazy where internet speed has come in the last 10 years.
4.1.2 Jelly Bean has been released for this phone now, I'd start by getting that. check out the LGOG development forums to flash a stock version of it or I think Lifeless ROM also has Jelly Bean incorporated now.
Sent from my LG-LS970 using xda app-developers app
After rooting you can choose to unlock your bootloader to flash better code or custom roms to your device, or download and run apps that would require root like root explorer or setcpu to change how your device works.
Unlocking is a whole different ballgame. It allows to flash custom kernels and roms. Like spatel said, 4.1.2 is out and if you unlock and flash TWRP or CWM, you can make a backup of your current phone system, data, efs, cache and then flash 4.1.2 to your phone to see if you like it or not. You can flash the new ZVB radio and possibly improve your signal. It all depends on what your comfortable with. Also, it depends on your interests and whether you're into theming or developing and rooting is just one of those precursors.
Currently there are a few roms based on stock but some AOSP roms will follow now that some source is available to developers. From what I understand, the efs contains important device info and is currently breaking with AOSP roms attempts but I'm sure the devs are making progress on it. If anything check the threads and stickies for a lot more info. There's a wealth of info out there and Google is your friend lol
Sent from my LG-LS970 using xda premium
Thanx for the info

[Mod]Full Screen Caller I.D

**Disclaimer - This is not my work. Just sharing it because I tested it on my T889 and it worked**
*USE AT YOUR OWN RISK**
-> You Can Find The Original Thread Here <-]
So I was just browsing through other Note 2 Forums and stumbled on this mod. I was bored so I figured.... ahh what the heck.
So I...
•Downloaded the zip (found in the linked OP)
•Created A Nandroid Backup (recommended but you can do as you wish)
•Flashed the zip via recovery (I'm using TWRP)
•Wiped Dalvik-Cache and Cache
•Reboot
Not sure if this was necessary but I did the following anyway...
•>Application Manager>com.sec.phone and cleared cache
•>Application Manager>Phone.apk and cleared cache
Used my daughters phone to test. Didn't work. I looked at the pic I had set for her. It was a crappy resolution.
So I picked one of the new pics I took of her. Boom! Full Screen Caller I.D
If it makes any difference I'm using 4.3 DN3 Rom (Ditto Note 3 Rom) from the ATT Roms Section.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I cropped the top part of the screenshot to remove her name and number.
Thanks I was tired of using a app for full screen. Question: you say you are running "Ditto Note 3 Rom for at&t. I am wondering did you lose any features with the rom since it was not designed to work with the t-mobile version?
hellfish said:
Thanks I was tired of using a app for full screen. Question: you say you are running "Ditto Note 3 Rom for at&t. I am wondering did you lose any features with the rom since it was not designed to work with the t-mobile version?
Click to expand...
Click to collapse
Not really.. just didnt have wifi calling... but it has hella features
Double0EK said:
Not really.. just didnt have wifi calling... but it has hella features
Click to expand...
Click to collapse
cool, I would like to try it out. was there anything special you had to do to get it running? like changing bootloaders ie? Also what version are you running?
hellfish said:
cool, I would like to try it out. was there anything special you had to do to get it running? like changing bootloaders ie? Also what version are you running?
Click to expand...
Click to collapse
Im using 4.1.2Bootloader .. just flashed the Rom (DN3 3.1.1) Let it boot.
Then went back and flashed Tmobile Modem/Radio and Devil Kernel (to get wifi working)
But now im using mattlowry's 4.4.2 TW Rom.

Play Store disguise request.

I have a galaxy s3 rooted with cm11 and cm cwm based recovery and I want to download magic 2014 directly from the play store yet I will not let me install it and I know it is compatible. Is there a way I can disguise my device from the play store as another so I can download it?
pickles523 said:
I have a galaxy s3 rooted with cm11 and cm cwm based recovery and I want to download magic 2014 directly from the play store yet I will not let me install it and I know it is compatible. Is there a way I can disguise my device from the play store as another so I can download it?
Click to expand...
Click to collapse
Change the build.prop. "d2spr" is the identifier for the S3 , there are three instances that you have to change. Change them all to "klte".
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My ROMs: Wicked X & Wicked S5 Xperience
I have d2lte mine is a newer s3 and d2spr does not work. And all of the ones I changed did not allow me to download. Can you label the lines to see if I have changed all that are needed?
pickles523 said:
I have d2lte mine is a newer s3 and d2spr does not work. And all of the ones I changed did not allow me to download. Can you label the lines to see if I have changed all that are needed?
Click to expand...
Click to collapse
There are three. If you changed three then you changed them all. Go into Application Manager, then All, then Google Play Store, then wipe data and try downloading again.
My ROMs: Wicked X & Wicked S5 Xperience
pickles523 said:
I have d2lte mine is a newer s3 and d2spr does not work. And all of the ones I changed did not allow me to download. Can you label the lines to see if I have changed all that are needed?
Click to expand...
Click to collapse
by newer s3 do you mean the "T" model?
I mean LTE
I am just going to post my build.prop.
https://www.dropbox.com/s/mgn8zjkvklyep6r/build.prop?dl=0
pickles523 said:
I mean LTE
Click to expand...
Click to collapse
the D2LTE is literally all US s3's cause all of them have LTE and it was easier to develop for them as a unified branch as apposed to the D2SPR or D2BST/D2VMU, D2VZW the list goes on and what will work fro you phone is to see what Carrier you have ie Sprint/Boost or what ever it may be....but if only D2LTE works for your S3 then.....i have no idea but as ryan said change what's in your Build Prop
I have and it is refusing to work.
pickles523 said:
I have and it is refusing to work.
Click to expand...
Click to collapse
Did you reboot? Wipe Play Store data?
My ROMs: Wicked X & Wicked S5 Xperience
This is the reason I no longer develop for AOSP, the simplest stuff just doesn't work and other devs don't take the time to do bug fixes because they are doing multiple devices that they don't even have. Sorry for the rant.
My ROMs: Wicked X & Wicked S5 Xperience
It's alright

No 3g or LTE on custom roms, only 1x.

I've made sure I was on ND8 before flashing, yet I still have no 3G or LTE on either of the lolipop roms I've tried. I've also tried backing up and restoring APN files from stock, and that didn't work either. My PRL and profile are up to date, I made sure before flashing.
SirLeto said:
I've made sure I was on ND8 before flashing, yet I still have no 3G or LTE on either of the lolipop roms I've tried. I've also tried backing up and restoring APN files from stock, and that didn't work either. My PRL and profile are up to date, I made sure before flashing.
Click to expand...
Click to collapse
What carrier?
mattzeller said:
What carrier?
Click to expand...
Click to collapse
Sprint
SirLeto said:
Sprint
Click to expand...
Click to collapse
did you check the MD5?
Yes, I did.
im in the same boat, every rom i try other than stock is 1x
SirLeto said:
Yes, I did.
Click to expand...
Click to collapse
lastot069 said:
im in the same boat, every rom i try other than stock is 1x
Click to expand...
Click to collapse
if you have the Sph-L710T then that could explain it...if not then i don't know what could be causing it..
You found try the dialer code for reactivation if you're on TouchWiz- ##72786#
I'm on the SPH-L710. Turns out the standard rom just displays 1x RTT as 3g. I've been on 1x the entire time I've had my pone. I don't get proper 3g or LTE at all.
will this wipe my phone?
No. But you have to be on TouchWiz.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My ROMs: Wicked X & Wicked S5 Xperience
bilgerryan said:
No. But you have to be on TouchWiz.
My ROMs: Wicked X & Wicked S5 Xperience
Click to expand...
Click to collapse
I still only get 1x.
SirLeto said:
I still only get 1x.
Click to expand...
Click to collapse
Your last choice is to Odin stock
My ROMs: Wicked X & Wicked S5 Xperience
bilgerryan said:
Your last choice is to Odin stock
My ROMs: Wicked X & Wicked S5 Xperience
Click to expand...
Click to collapse
Did that already.
SirLeto said:
Did that already.
Click to expand...
Click to collapse
Call Sprint
My ROMs: Wicked X & Wicked S5 Xperience

Categories

Resources