Ran Sunshine last night, installed TWRP. bootloader says its S-off and unlocked, just making sure I can flash custom rom's before i do so.
It IS Lupus said:
Ran Sunshine last night, installed TWRP. bootloader says its S-off and unlocked, just making sure I can flash custom rom's before i do so.
Click to expand...
Click to collapse
Yes.
Yes you can. Don't even need s-off ! You have any idea what you are doing because if you need to ask this i have a slight doubt ?
Mr Hofs said:
Yes you can. Don't even need s-off ! You have any idea what you are doing because if you need to ask this i have a slight doubt ?
Click to expand...
Click to collapse
If he doesn't we'll see him again in the next week or so with a help thread :good:
I would strongly suggest reading up on flashing etc before attempting though @It IS Lupus :cyclops: :good:
BerndM14 said:
If he doesn't we'll see him again in the next week or so with a help thread :good:
I would strongly suggest reading up on flashing etc before attempting though @It IS Lupus :cyclops: :good:
Click to expand...
Click to collapse
This isn't my first root, But I don't have RW access so I can't nand yet(which was what threw me off and why I asked) (yes I flashed SU from Recovery)
It IS Lupus said:
This isn't my first root, But I don't have RW access so I can't nand yet(which was what threw me off and why I asked) (yes I flashed SU from Recovery)
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Just stated IF you don't then we'll see you soon enough with a "help I'm bricked" thread or something, in which case IF you weren't familiar with it you should read up on it first.
If you do know what you're doing though then, well, my post is null and void isn't it? :highfive:
BerndM14 said:
Just stated IF you don't then we'll see you soon enough with a "help I'm bricked" thread or something, in which case IF you weren't familiar with it you should read up on it first.
If you do know what you're doing though then, well, my post is null and void isn't it? :highfive:
Click to expand...
Click to collapse
There was no offense taken. I was just stating for the fact. I'm sorry for sounding rude. *bows*
Okay, so, went to install the latest PA. and got "unable to mount /system" Like I said. I am S-off and unlocked, ran the SU zip through recovery and all that. still no dice.
BerndM14 said:
If he doesn't we'll see him again in the next week or so with a help thread :good:
I would strongly suggest reading up on flashing etc before attempting though @It IS Lupus :cyclops: :good:
Click to expand...
Click to collapse
A week....nah in hours you mean
Mr Hofs said:
A week....nah in hours you mean
Click to expand...
Click to collapse
Still getting stuck at boot screen, I'm past the HTC screen and have the PA boot screen. still getting "unable to mount /system"
It IS Lupus said:
Still getting stuck at boot screen, I'm past the HTC screen and have the PA boot screen. still getting "unable to mount /system"
Click to expand...
Click to collapse
Have you tried to flash it again and/or flash another ROM?
BerndM14 said:
Have you tried to flash it again and/or flash another ROM?
Click to expand...
Click to collapse
Yes I have. I'm gonna flash the newest version of TWRP and hope that it fixes it. I had a similiar problem on my TF300 and that fixed it
updating my recovery worked. at least in the sense that I can mount system now. Gapps installed and it's letting me do a nandroid so. that's a step in the right direction
For Future reference, don't use All in one tools(this is a personal note)
Edit: ET Voila. I feel like an idiot. I had this issue with my tablet and should have thought of it first.
Thanks guys
It IS Lupus said:
Yes I have. I'm gonna flash the newest version of TWRP and hope that it fixes it.
Click to expand...
Click to collapse
You shouldn't have installed an outdated recovery version to begin with. That is just asking for trouble.
Stay away from Toolkits, they cause more problems than they solve. Anything a toolkit can do, you should be able to easily do manually.
Related
Does anyone know if ClockworkMod recovery 3.0.0.0 now works for the newer EVo 4G with the 2.10 hboot?? I installed it with ROM Manager, flashed the SBC kernel and everything seems to work OK.
This is a question, therefore, should go in the question thread.. not development thread
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
<br/>Flame On!
People dont want to understand their device, they just want it to be shiny, and to work.
That is the #1 reason Apple is still alive.
^^^^^^^^^^^^^^
Love it!
Joshonekenobi said:
People dont want to understand their device, they just want it to be shiny, and to work.
That is the #1 reason Apple is still alive.
^^^^^^^^^^^^^^
Love it!
Click to expand...
Click to collapse
+1 on that!!
And the answer is no the the OP.
Learn some command prompt lines and root it today.
It may be working...idk...The only way to test is install in and see if you can install a rom.
zikronix said:
It may be working...idk...The only way to test is install in and see if you can install a rom.
Click to expand...
Click to collapse
Zi... Now if he breaks his **** he's gonna blame you even though you said idk, LOL
its it really that hard
You guys are all annoying....just answer his question.
He's pretty new, and a mod will move it to the right place.
Yes, it does. It's still considered beta, but it works, as it did for me.
It didn't work for me. I had to downgrade to 2.5.1.2.
It tried to backup my ROM, but when it tried to go into recovery, it just brought me to the main HBOOT screen, wouldn't go into recovery at all.
Yea me too. I'm stuck. I'm trying boot into recovery but can't. And now I don't know how to get back.
Sent from my PC36100 using XDA App
I installed 3.0.0 and it wouldnt let me install a rom, thers an update 3.0.1 but it has an error everytime I try and update it
Same here. I'd love to have CWM Recovery and ROM Manager combo. That would be awesome. I'm also waiting for the removal of the super-secure No, No, No, No, Yes, No, No confirmation screens.
I'm on an "old" 003 EVO by the way.
NewZJ said:
I installed 3.0.0 and it wouldnt let me install a rom, thers an update 3.0.1 but it has an error everytime I try and update it
Click to expand...
Click to collapse
nivron said:
Same here. I'd love to have CWM Recovery and ROM Manager combo. That would be awesome. I'm also waiting for the removal of the super-secure No, No, No, No, Yes, No, No confirmation screens.
I'm on an "old" 003 EVO by the way.
Click to expand...
Click to collapse
oh yes, I hate clicking up a bunch to say yes, wonder if koush thinks we are all 8yr old windows users
Mine took the 3.0 but it seems slower to boot into recovery now. not sure what version evo mine is.
chillenandy321 said:
Mine took the 3.0 but it seems slower to boot into recovery now. not sure what version evo mine is.
Click to expand...
Click to collapse
Edit: When I try and flash something it aborts... How do you go back to the older recovery??
pimpinonline said:
It didn't work for me. I had to downgrade to 2.5.1.2.
It tried to backup my ROM, but when it tried to go into recovery, it just brought me to the main HBOOT screen, wouldn't go into recovery at all.
Click to expand...
Click to collapse
How do you get back to 2.5.1.2??
If you use ROM Manager, you can 'Flash Alternate Recovery' to go back to Amon Ra 1.8.
chillenandy321 said:
Edit: When I try and flash something it aborts... How do you go back to the older recovery??
Click to expand...
Click to collapse
I've never ran Amon Ra before..
Sorry, I misread your message. There is an item at the bottom of ROM Manager that will allow you to pick Experimental/Older Versions of ClockworkMod.
chillenandy321 said:
I've never ran Amon Ra before..
Click to expand...
Click to collapse
nivron said:
Sorry, I misread your message. There is an item at the bottom of ROM Manager that will allow you to pick Experimental/Older Versions of ClockworkMod.
Click to expand...
Click to collapse
Yeah I tried to run some old versions and no go
Hey guys I'm kinda new to Android I've had a chappy phone and now an LG g pad after attempting root about a dozen times I finally managed to get it root now I am trying to get TWRP to backup the tablet and change the boot animation later but every time I tried on my pc it would fail so I installed flashify and tried with that I then I got a boot error saying security issues. The tablet stills boots but I believe the problem is the locked boot loader. Thanks for any help offered.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Look at this thread where some options for flashing TWRP are discussed: http://forum.xda-developers.com/lg-g-pad-83/help/recovery-mode-t2880087
Okay thanks ill check it out
Btw i think my boot loader is locked will this affect it?
Thanks
rooing problems
Joshhi said:
Btw i think my boot loader is locked will this affect it?
Click to expand...
Click to collapse
Have you installed root checker or another program to confirm that you do, in fact, have root? Start with that.
If you haven't installed a superuser app to handle permissions, I'd do that as well before trying to install TWRP.
I'll admit I had troubles installing TWRP as well, when looking at the forums, make sure you're downloading the version for your EXACT version of android and firmware, and following the instructions for the right version as well. Good luck!
yojimboj said:
Have you installed root checker or another program to confirm that you do, in fact, have root? Start with that.
If you haven't installed a superuser app to handle permissions, I'd do that as well before trying to install TWRP.
I'll admit I had troubles installing TWRP as well, when looking at the forums, make sure you're downloading the version for your EXACT version of android and firmware, and following the instructions for the right version as well. Good luck!
Click to expand...
Click to collapse
I got it flashed yesterday forgot to post that so i tried to change the boot animation and soft bricked it luckily i backed up
Joshhi said:
I got it flashed yesterday forgot to post that so i tried to change the boot animation and soft bricked it luckily i backed up
Click to expand...
Click to collapse
Will be good if you share how you doit, becouse i have a same problem. Tnx
adler123 said:
Will be good if you share how you doit, becouse i have a same problem. Tnx
Click to expand...
Click to collapse
Do what? Unbricked it or flashed twrp?
Joshhi said:
Do what? Unbricked it or flashed twrp?
Click to expand...
Click to collapse
flashed twrp to v50020d
atomicblue said:
flashed twrp to v50020d
Click to expand...
Click to collapse
I believe it was this
Further in the thread they tell you that you have to change the command from v500-20a to d
http://forum.xda-developers.com/showthread.php?t=2698267
I also think youll have to flash the latest version of twrp from a zip manually
Hi All
help me please
Sorry for bad english
i have a htc one m8 , it was on android 4.4.4
i installed this rom on it :
http://forum.xda-developers.com/showthread.php?t=2706391
its working nice , but for a problem i changed my rom
i installed android revolation hd 4.4.4 from recovery , after it my phone stuck in bootloader only ,
then i flashed other roms but stuck in bootloder yet
after reboot phone only in bootloader
i flashed all boot.img files after flash any rom but still no work
at last i flashed a nandroid backup but after reboot phone just go to bootloader
after reboot phone have bootlogo of the first rom ( skydragon gpe android 5 ) i installed and the only recovery is work is the recovery i flashed skydragon with it , and if i install another recoverys after click to go recovery phone restart in bootloader
here are the images
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Re-lock the bootloader and flash the 3.33.40 1.6 RUU via microSD car (if you have one) and it should be OK
https://drive.google.com/file/d/0B17smFr95pleaW9iTFBiSUE2OVE/view?usp=sharing
tnx a lot sir
the file is downloding sir
how i flash it ?
copy in sd card and ?
1. Rename it 0P6BIMG.zip (not 0P6BIMG.zip.zip obviously)
2. Copy it to the microSD card
3. Boot phone into HBOOT and it should find the file and ask if you want to continue
HBOOT
SD Checking...
No gift file...
Loading...[0P6BDIAG.zip]
after this
checking...
after this
press <POWER> to reboot
and then bootloader again...
So it doesn't allow you to update the device? And you relocked the bootloader? If so, please post a screenshot as you did the OP
as for the correct info.......if he is s-on he needs to relock it, with s-off its not mandatory but definetly not wrong as it works anyway.
:good:
i cant share screenshots cause xda dont allow me
have here upload center for photos and i upload here ?
please help me
Why you tell him to relock, he can do what he wants with the bootloader unlocked very well.
UniversalKID said:
Why you tell him to relock, he can do what he wants with the bootloader unlocked very well.
Click to expand...
Click to collapse
No he can't that's the problem. Running a ruu form method on a s-on device needs a relocked bootloader so the answer eddy gave was and still is in this case very safe and fail proof.
s-on - needs relocked bootloader
s-off - doesn't matter at all
see...safe. please take this very well ment advice to do some fine research. then we all can be happy and help others in a correct and useful way
UniversalKID said:
Worst advice, never relock the bootloader.
Click to expand...
Click to collapse
You have to to flash an RUU, shows how much you know
Plus it's nice and easy to unlock it again if you need to, so it's perfectly sound advice
pleasee help me
what should i do now ?
alishadlou said:
pleasee help me
what should i do now ?
Click to expand...
Click to collapse
@UniversalKID can help you. he knows this stuff and on a side note as a last tip.....stubborn people who are not willing to learn won't get very far here. Choose your words wisely.
I've been as friendly as i could be with you, also to help you with this. But please accept the fact that you have to learn a lot
Mr Hofs said:
@UniversalKID can help you. he knows this stuff
Click to expand...
Click to collapse
Yep, clearly RC's don't know what they're on about
UniversalKID said:
LOL another one. HAHAHA
Click to expand...
Click to collapse
Lol don't think you should be taking the mick out of these two bro. I would follow thier advice ANY day!!!!!!
reading through your posts the last few days i don't think you should be questioning these guy's advice
universalkid please keep your knowledge for yourself
im here for solve my problem only
i posted here only for pro's help me to solve my problem
i dont have much time
please let them help me
eddy , mr hoffs , please share ur info with me and help me to do it
realy i need ur help
tnx a lot
EddyOS said:
Yep, clearly RC's don't know what they're on about
Click to expand...
Click to collapse
i edited my advice........hope he will pick it up somehow. He can learn from the best here and we are very willing to share this knowledge, only if he decides to accept it of course
Unlock your bootloader, root, install TWRP and flash CyanogenMod ROM. Don't forget about the Gapps.
Do this and you'll have a working device.
Well the first thing is that you can't just run any ruu......i wonder if anyone noticed that you have the DUAL-SIM M8 phone and NOT the single sim (general model) M8.........check if you have the correct DUAL-SIM ruu or a DUAL-SIM nandroid backup !
---------- Post added at 02:52 PM ---------- Previous post was at 02:50 PM ----------
UniversalKID said:
Unlock your bootloader, root, install TWRP and flash CyanogenMod ROM. Don't forget about the Gapps.
Do this and you'll have a working device.
Click to expand...
Click to collapse
Ah yes great solution....as CM is of course the stock software. Its getting funnier by the minute
wow
dual-sim and single-sim are diffrent models ?
my phone is dual sim sir
I have the Google Version of Pixel 2 XL I get a fail every time I try and update this but I get "Variable not found." I been at this all night I give up. A link would be a big help.
Thanks all
WhiteReign said:
I have the Google Version of Pixel 2 XL I get a fail every time I try and update this but I get "Variable not found." I been at this all night I give up. A link would be a big help.
Thanks all
Click to expand...
Click to collapse
i just use the factory images
https://developers.google.com/android/ota
Here's the OTAs. I've circled the right one. Maybe you were downloading the UK one?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Pixel 2 XL using Tapatalk
I can only get the DEC 5 To work. When I do it wont let me up grade to the newer version. kinda stuck here.
Did you unlock critical? One of the messages at the very beginning says unable to flash critical. Sounds like that's the reason that it's failing. If you haven't unlocked critical, and you're going to try it, be aware that it's going to wipe your data.
Secondly, did you try just flashing the bootloader from the January update by itself first?
Sent from my Pixel 2 XL using XDA Labs
sharkie405 said:
Did you unlock critical? One of the messages at the very beginning says unable to flash critical. Sounds like that's the reason that it's failing. If you haven't unlocked critical, and you're going to try it, be aware that it's going to wipe your data.
Secondly, did you try just flashing the bootloader from the January update by itself first?
Sent from my Pixel 2 XL using XDA Labs
Click to expand...
Click to collapse
I did just this "fastboot flashing unlock_critical" now after I fast boot I get your device is corrupt It cant be trusted. If I goto Decembers OTA its fine. I dont get it. I am on Verizon's network but got my phone from Google.
WhiteReign said:
I did just this "fastboot flashing unlock_critical" now after I fast boot I get your device is corrupt It cant be trusted. If I goto Decembers OTA its fine. I dont get it. I am on Verizon's network but got my phone from Google.
Click to expand...
Click to collapse
There are multiple step-by-step guides here on how to do just this. Suggest you take a step back and read one or two. There are two separate unlock commands to use and from your photo you did not complete that. Secondly, it looks like you may be using an outdated version of the adb/fastboot binaries. Lastly you don't flash an OTA with flash-all. If you are attempting to sideload an OTA, you use the "adb sideload" command with the phone in Recovery, not flash-all in fastboot mode. At this point, you should probably update your adb/fastboot binaries, download the full factory image (not OTA) and flash it instead. Slow down and read more.
Damn Sir! Thank you very much for the help!
WhiteReign said:
Damn Sir! Thank you very much for the help!
Click to expand...
Click to collapse
Not blaming anyone but instead just using your post for calling out there are what seems like dozens of variations for doing the same few tasks on this device. There are a couple really good tutorials that are either 100% or were until something like TWRP of magisk changed something. At the end of the day there are a few givens that will eventually shake out into something like the Heisenberg thread over on the 6P device.
For anyone reading this, unlock critical if you have not, install a custom kernel if you have touch issues in TWRP, really really really read up on the few custom roms that just hit as they add a few variables that most of us have never experienced, make a list of things you install as you do it. All too often people spend countless time and effort helping someone with a boot loop only to find out something not mentioned was in play. Poor steps were attempted from some other thread only to not help or made it worse or different. Examples of this would be xposed, custom kernel, any zip file mods you flashed, viper, Dolby, substratum, you get the idea. We all wanna help and we all need help at some point. Let us try to make the game as easy to play as possible. Flash on brothers and sisters!!
Phone Details:
Samsung Galaxy S9 Plus: SM-G965F running Android 10
Program used:
Odin3 v3.14
Image used:
twrp-3.3.1-0-star2lte.img.tar
What I've tried flashing:
Magisk v20.4 and Magisk v20.3
Left phone on for about roughly 40 minutes and still showing and haven't gotten any further
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm a Noob to this but before I started playing with my daily driver I Successfully Rooted my old Samsung Galaxy S6 edge just to at least to get hands on experience and not go in blind.
Any help will be greatly appreciated
Having the same problem, Please Please Please HELP
Is this the first time you are doing this?
Did you follow the steps exactly as outlined here?
https://forum.xda-developers.com/ga...cross-device-development/twrp-exynos-t3763464
Did you flash the kernel patch afterwards or a custom ROM that has it patched already for you?
Keep in mind I was on android 8 when I used the patch in that thread, you may or may not have to look for a newer one.
pauaxe said:
Is this the first time you are doing this?
Did you follow the steps exactly as outlined here?
https://forum.xda-developers.com/ga...cross-device-development/twrp-exynos-t3763464
Did you flash the kernel patch afterwards or a custom ROM that has it patched already for you?
Keep in mind I was on android 8 when I used the patch in that thread, you may or may not have to look for a newer one.
Click to expand...
Click to collapse
I honestly have no idea, I followed A youtube video on how to do it on android 9 but obviously got all the files to suit android 10
I just read the guide you sent and the only thing i didn't do was flash the dm-verity and force encryption disabler.zip so ill try again by using that guide and ill keep[ everyone posted
BigDawg443 said:
I honestly have no idea, I followed A youtube video on how to do it on android 9 but obviously got all the files to suit android 10
I just read the guide you sent and the only thing i didn't do was flash the dm-verity and force encryption disabler.zip so ill try again by using that guide and ill keep[ everyone posted
Click to expand...
Click to collapse
Remember to search for the last verity patch. Good luck.
pauaxe said:
Remember to search for the last verity patch. Good luck.
Click to expand...
Click to collapse
just done so and followed the guide and still no luck... Downloaded the latest no-verity-opt-encrypt-6.1.zip and flashed it then after that flashed Magisk v20.4 and still the same issue. Tried just booting it up after only flashing the no-verity-opt-encrypt-6.1.zip but still no good
BigDawg443 said:
just done so and followed the guide and still no luck... Downloaded the latest no-verity-opt-encrypt-6.1.zip and flashed it then after that flashed Magisk v20.4 and still the same issue. Tried just booting it up after only flashing the no-verity-opt-encrypt-6.1.zip but still no good
Click to expand...
Click to collapse
Have you flashed the right Bootloader and Modem for your firmware?
Also give this verity patch a try
https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389
If that doesn't work either then a custom rom is your best bet as you'll have pretty much everything done for you, SoLdieR9312 and _alexandr ROMS are probably the most stable and stock-like right now.
pauaxe said:
Have you flashed the right Bootloader and Modem for your firmware?
Also give this verity patch a try
https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389
If that doesn't work either then a custom rom is your best bet as you'll have pretty much everything done for you, _alexandr's is probably the most stable right now.
Click to expand...
Click to collapse
Ok so i just wanna say thank you so much man like really. it is working 100% and flawlessly thank you so much man
BigDawg443 said:
Ok so i just wanna say thank you so much man like really. it is working 100% and flawlessly thank you so much man
Click to expand...
Click to collapse
Great! I assume it was the verity patch?
pauaxe said:
Great! I assume it was the verity patch?
Click to expand...
Click to collapse
Yeah had to of been cause soon as I used it she booted up like normal. Only thing I had to do was follow a tutorial for fixing the ctsPROFILE being false but that was easy enough haha
BigDawg443 said:
Yeah had to of been cause soon as I used it she booted up like normal. Only thing I had to do was follow a tutorial for fixing the ctsPROFILE being false but that was easy enough haha
Click to expand...
Click to collapse
Ah forgot about that, good to know, congrats!