How do I safely update my Note 2 firmware?? - Galaxy Note II Q&A, Help & Troubleshooting

Hi all,
I bought my Note 2 from overseas. When I go about phone and Software Update, it tells me I have the latest version installed already. However, these are the specs:
The model number is GT-N7100,
Android version 4.1.2,
Baseband version N7100XXDLK7,
Kernel version 3.0.31-1071214 [email protected] #1 SMP PREEMPT Wed Mar 27 10:33:53 KST 2013
Build number JZ054K.N7100XXDMC3
I'm just wondering where I can go to download a firmware update for my Note 2 so that I can preserve all the information on my phone.
Cheers,
Lycan

Same problem happens with me bought my gnote 2 frm u.s running on 4.1.2 I manualy updated my note 2 with odin frm official 4.1.2 to 4.4.2 offical kitkat xxufnd1 no data lost but I actually lost network of my phone everything is working fine aftr update no data lost nothing but no network then I got network repaired through z3x box and now working fine

Look here
http://www.sammobile.com/firmwares/1/?model=GT-N7100&pcode=0

Related

[Q] Help relating note 2

Model number
GT-N7100
Android version
4.1.1
Baseband version
N7100XXALJ2
Kernel version
3.0.31-310959
[email protected]#1
SMP PREEMPT
Build number
JRO03C.N7100XXALJ3
Alright. So a friend of mine bought a note 2. I'm helping him root it and install a custom rom. He says its a korean version. Is it safe to root it like a normal note 2. This is what it says in the about tab
dkc379 said:
Model number
GT-N7100
Android version
4.1.1
Baseband version
N7100XXALJ2
Kernel version
3.0.31-310959
[email protected]#1
SMP PREEMPT
Build number
JRO03C.N7100XXALJ3
Alright. So a friend of mine bought a note 2. I'm helping him root it and install a custom rom. He says its a korean version. Is it safe to root it like a normal note 2. This is what it says in the about tab
Click to expand...
Click to collapse
You're good to go..happy flashing!

Kies Updated the Phone-ATT DownGraded the Phone

I restored the phone to the factory settings using Kies and it downloaded the stock image with the new firmware.
After the kies update Service version : Android Version : 4.1.2 / Baseband Version : I317UCAMA4 and the phone booted up and everything was good. I then got a popup for AT&T to update and that update downgraded to I317UCAMC3 build JZ054K.I317UCAMC3. And to make my question the ATT update it says from Kes,Your devices current firmware version is not supported update firmware via Kies.
Current Firmware version: PDA:MC3/Phone:MC3/CSC:MC3 (ATT)
Kernel Version:3.0.31-578342 se [email protected] #1 SMP PREEMPT Wed Apr 10 17:14:59 KST 2013
Why would it downgrade the firmware?
UCAMC3 is a newer firmware, not an older one
Thanks for the smackdown but why the Kies Error?
Jasoninaz said:
Thanks for the smackdown but why the Kies Error?
Click to expand...
Click to collapse
It always does that for some reason to me, then you'll come back a day later it will work without any problems.
Kies istself is just very buggy
I hate Kies.......blahhhhhhh garbage....
Odin is the trick....g

[Q] Upgrading to firmware 4.3 on Note 2

Finally decided to upgrade to 4.3. But can't do it OTA cos my 4.1.2 is rooted.
I just need to confirm do I have to use back the original country firmware? Like I bought my phone in Hong Kong so have to use back the Hong Kong version?
If yes, then how do I find out which country/region is my phone from? Below are my phone settings info:
Baseband version: N7100XXDLK7
Kernel version: 3.0.31-780747 [email protected]#1 SMP PREEMPT Wed Feb 6 21:32:32 KST 2013
Build Number: JZO54K.N7100ZSDMB1
Also how else can I get info for my PDA, CSC and MODEM?
All help will be greatly appreciated.
U can use any n7100 firmware.
Just make sure u r ready for knox bootloader.
Sent from the corner of this rounded earth (N7105 v4.3, powered by LionROM)
You can flash firmware for n7100 from any region except career based roms.If you dont want knox bootloader,there are knox free 4.3 firmwares available on XDA forum,you can flash them without worrying 'cause you can roll back to older firmwares whenever you you want.
If you want to know the firmware's region/country you can always look upto sammobile.com or here:http://forum.xda-developers.com/showthread.php?t=1356325
Hope it helps..

[Q] network problem i747

Hello everyone
I ask you all to help my. Use this device with the Italian network. The problem that is hard to find the net from my provider. Roaming works pretty well but I can use on the network data. I tried changing om also but nothing.
List of features:
model number SAMSUNG-SGH-I747
CyanogenMod version 11-20141008-SNAPSHOT-M11-D2LTE
Android version 4.4.4
Baseband version I747UCUFNE4
Kernal version [email protected] #1 TUE OCT 7 19:42:37 PDT 2014
Number Build CM_D2LTE-USERDEBUG 4.4.4 KTU84Q A2F8BBB873 TEST-KEYS
In addition to this I have tried other rom with baseband but nothing different. Even with original firmware. I checked the frequency band and is compatible. I hope you can help me.
Thanks Gilles

Baseband unknown Samsung D710

Hi All
I am facing a problem where my Samsung D710 has lost the MEID and now I do not receive any signal
The device informations are
carrier
sprint mobile
model number
SPH-D710 virgin mobile
android version
4.1.2
Baseband version
unknown
Kernel version
3.0.31-1014481
[email protected]#3
SMP PREEMPT Fri Mar 1 04:27:41
KST 2013
Build number
JZO54K.SPH-D710.GB27
Hardware version
Software version
Unknown
thanks
I would suggest a full stock rom flash to a JB build. That should reset your phone. Just be sure to use the right rom.

Categories

Resources