Hi. I have an R800i which I rooted some time ago. Up until recently it has been running ICS with a Lupus kernel. I then flashed 2.3.3 UK ftf from here and it seemed to work. It prompted me for an OTA update and I started it. After downloading the update and rebooted, the phone displayed a black screen and a progress bar (nothing odd, seemed as though it was updating) and after a couple of minutes it turned off. Since then I haven't been able to turn the phone back on. I would press the power button and all it would do is briefly flash the green LED and vibrate, but that's about it. If I would hold the power button it would do that every couple of seconds. I cannot access the recovery menu either. It may be worth noting that by connecting the phone to my PC it would start in flashmode (blank screen), so I tried reflashing the same (and some other) ROMs using Flashtool but with the same result. Up until now, flashing ftfs through Flashtool seems to be the only thing I can still do. Any help would be appreciated. Thanks in advance!
hi
iftode.bogdan said:
Hi. I have an R800i which I rooted some time ago. Up until recently it has been running ICS with a Lupus kernel. I then flashed 2.3.3 UK ftf from here and it seemed to work. It prompted me for an OTA update and I started it. After downloading the update and rebooted, the phone displayed a black screen and a progress bar (nothing odd, seemed as though it was updating) and after a couple of minutes it turned off. Since then I haven't been able to turn the phone back on. I would press the power button and all it would do is briefly flash the green LED and vibrate, but that's about it. If I would hold the power button it would do that every couple of seconds. I cannot access the recovery menu either. It may be worth noting that by connecting the phone to my PC it would start in flashmode (blank screen), so I tried reflashing the same (and some other) ROMs using Flashtool but with the same result. Up until now, flashing ftfs through Flashtool seems to be the only thing I can still do. Any help would be appreciated. Thanks in advance!
Click to expand...
Click to collapse
try to flash this file ... it can unbrick your device if you can still get in flashmode... download from attachment..
Worked!
kks111 said:
try to flash this file ... it can unbrick your device if you can still get in flashmode... download from attachment..
Click to expand...
Click to collapse
It worked. Thanks a bunch!
Related
Hello, i have just registered to the forums, but i already follow xda for a long time. So here is my problem, i have already installed "ICS JJ's Hybrid Rom" on my Xperia Arc S without trouble at all, but now that i want to try a new rom i'm facing a big problem with fastboot.. I have tried to go FastBoot pressing Menu/Back button and plug in the phone, i tried to reboot in fastboot by X-Parts/Rom Manager and so on, but no luck untill now, and i dont know what is the problem since i don't even get blue light when i try to do it.
Yes i have installed flashtool drivers for the phone, basically green light appears instead of blue, the phone goes on black screen and after 5-10 seconds it disconnects.
I don't know if you guys need more information or not but i think im doing everything correctly, because i have tried countless guides and videos.
I would really appreciate some help if possible, thanks.
Have you actually unlocked your bootloader?
as i said, i have [ICS]JJ's Hybrid Rom on my Xperia Arc right now, so yes i had to unlock bootloader to install it.
JJ's hybrid works on locked bootloaders too. Have you flashed any custom kernel
Sent from my Xperia Arc S using xda premium
Moah123 said:
basically green light appears instead of blue, the phone goes on black screen and after 5-10 seconds it disconnects.
Click to expand...
Click to collapse
If you get green light, you are turning your phone into flashmode and not fastboot. Hold down Menu button and then connect the cable.
I know that i enter fastboot with holding menu button but it just doesnt work, the only way it works is with Emma (Sony FlashTools) and it appears green light as well when i do it.
I have installed CyanogenMod 11 custom rom to my Xperia Arc S. After flashing boot.img through flashtool, device got shutdown. Till now everything was fine. But after this the tutorial said to start the phone and after the phone vibrates, start pressing the volume down button. I did the same. But after vibration, phone is not showing anything. It shows dim light on screen but its not showing either the logo nor its starting. The LED light on side turns to purple but nothing happens after that. I did this with every button but its not starting. Pls halp me out....
Thanks...
vishalsitapura said:
I have installed CyanogenMod 11 custom rom to my Xperia Arc S. After flashing boot.img through flashtool, device got shutdown. Till now everything was fine. But after this the tutorial said to start the phone and after the phone vibrates, start pressing the volume down button. I did the same. But after vibration, phone is not showing anything. It shows dim light on screen but its not showing either the logo nor its starting. The LED light on side turns to purple but nothing happens after that. I did this with every button but its not starting. Pls halp me out....
Thanks...
Click to expand...
Click to collapse
Did you flash the kernel for your device?
Sent from my Xperia Neo V using Tapatalk 2
vishalsitapura said:
After flashing boot.img through flashtool, device got shutdown.
Click to expand...
Click to collapse
Tell more about this. How did you do it, what happened, what buttons did you press etc etc.
Yes. I have installed kernel for it via flashtool. Initially after doing this it was not going to recovery mode and also it was not getting connected to flashtool. But now it is getting connected to flashtool in fastboot mode. So tried to flashing with 10.2 version, it showing finished but again the same problem. Its not going to recovery mod.
as in, HOW did you flash the kernel exactly. Dont just say you used flashtool, how did you use it? What combination did you use to get into fastboot? Any errors in flashtool? How did you boot into recovery (I.e. which keys did you press) and does the LX kernel logo even appear on boot?
Sent from my Nexus 5 using Tapatalk
vishalsitapura said:
Yes. I have installed kernel for it via flashtool. Initially after doing this it was not going to recovery mode and also it was not getting connected to flashtool. But now it is getting connected to flashtool in fastboot mode. So tried to flashing with 10.2 version, it showing finished but again the same problem. Its not going to recovery mod.
Click to expand...
Click to collapse
First check does that kernel has built in recovery...If nothing works,to get your phobe to work flash stock .ftf file with flashtool.
Do you have unlocked bootloader?
And try one more thing,when you turn on the phone start pressing volume down (-).)!
Sent from my Xperia Arc LT15i using XDA
I think i have the same problem as OP.
I decided to try out LegacyXperia CM11 and installed it yesterday. It went well, but it is still kinda buggy so i decided to go back to besttt's Slim Bean. I copied rom files on SD card and went to flash kernel (darkanzuEOL). I flashed it through Flashtool like every other time and it went without errors so i proceeded to boot into recovery so i can flash the rom. This is where everything stopped working normally. After i power on the phone and press voldown to enter cwm it just gets stuck on cwm loading screen. If i dont try to get into recovery it just bootloops. I tried several kernels i have on my HDD and always the same result.
I'm downloading stock img to flash and see if that will help. will let you know what happens.
EDIT:
Stock img worked, now i'm back on slim. Only other thing i changed ( which i think is the cause) is i used original sony usb cabel instead of my Nexus 7's i used originaly
OK guys so I got my xperia zl today, updated to 4.3 (.569), unlocked the boot loader, then tried flashing a CWM, now the phone is utterly and totally bricked, I tried the volume buttons + power button trick nothing, won't turn on at all, no fastboot, no flashmode, pc companion wont recognize it, the only thing I can get out of it is a single vibrate if I hold down the reset button at the back but even after that I get nothing, at all, the only thing that does anything is holding the reset button, any help would be greatly appreciated and if one of you magnificent people can get my phone working again I will send you money through paypal as a thank you,
[SOLVED] Check post 4
DracoManX69 said:
OK guys so I got my xperia zl today, updated to 4.3 (.569), unlocked the boot loader, then tried flashing a CWM, now the phone is utterly and totally bricked, I tried the volume buttons + power button trick nothing, won't turn on at all, no fastboot, no flashmode, pc companion wont recognize it, the only thing I can get out of it is a single vibrate if I hold down the reset button at the back but even after that I get nothing, at all, the only thing that does anything is holding the reset button, any help would be greatly appreciated and if one of you magnificent people can get my phone working again I will send you money through paypal as a thank you,
Click to expand...
Click to collapse
go to service centre they wont recognise if the phone has unlocked bootloader or not bcoz it doesnt start !so they will jst replace it tell them that u were updating it to 4.3 and afterwards it didnt boot.dont tell them u have unlocked bootloader or any WARRENTY RELATED STUFF.u will get a new one for free
DracoManX69 said:
OK guys so I got my xperia zl today, updated to 4.3 (.569), unlocked the boot loader, then tried flashing a CWM, now the phone is utterly and totally bricked, I tried the volume buttons + power button trick nothing, won't turn on at all, no fastboot, no flashmode, pc companion wont recognize it, the only thing I can get out of it is a single vibrate if I hold down the reset button at the back but even after that I get nothing, at all, the only thing that does anything is holding the reset button, any help would be greatly appreciated and if one of you magnificent people can get my phone working again I will send you money through paypal as a thank you,
Click to expand...
Click to collapse
This phone doesnt have any Volume +/- power button trick. It ONLY has the yellow reset button. Its a pain in the A*S!
Try a few things first.
1) When you hold down the yellow reset button, are you ONLY holding it down for a few seconds, and it vibrates ONCE?
Have you tried holding it down for 10 seconds, until it vibrates TWICE, indicating it has powered off completely, and THEN try connecting it?
2) If step 1 got your phone to power off completely try:
-Connecting your phone to your PC via USB with the volume DOWN button held and see if you get a GREEN L.E.D. If you do you have
successfully entered flash mode, in which case you can simply flash an FTF file with flashtool.
-Connecting your phone to your PC via USB with the volume UP button held and see if you get a BLUE L.E.D. If you do you have
successfully entered fastboot. From here, as long as you have ADB and your devices drivers installed on your computer, you can flash
a boot.img or "Kernel" with a fastboot command in a command window (fastboot flash boot boot.img). The easiest way to get a kernel or
boot.img with a baked in recovery is to download the latest Cyanogenmod, unzip and extract the boot.img, and flash it via fastboot.
Since you have an unlocked bootloader already, your device should be able to use an AOSP kernel.
From there you should be able to at least boot into recovery, and flash something from your SD card.
Id recommend just flashing the latest Cyanogenmod just to get your device up and running. From there you should be able to follow steps
get back to stock if thats what your looking for.
I hope at least one of these options work.
If not, like that last guy said, take it to a service center and get it checked out.
GOOOOD LUUUUCK!!
bhavstech said:
go to service centre they wont recognise that if the phone has unlocked bootloader bcoz it doesnt start !so they will jst replace it tell them that u were updating it to 4.3 and afterwards it didnt boot.dont tell them u have unlocked bootloader or any WARRENTY RELATED STUFF.u will get a new one for free
Click to expand...
Click to collapse
Yeah man that would've been my first guess at what to do if i didn't get it fixed but FUKKEN SOLVED YESSSSSSSSSSS, intially all i could get was a single buzz holding the reset button, but then (out of fustration) i decided to hold it past the first vibrate, then 3 vibrates happened in a row, next thing i know flashmode and fastboot mode working :laugh: :laugh: :laugh: :laugh: :good: :good: :good: :good: :victory: :victory: :victory:
DracoManX69 said:
Yeah man that would've been my first guess at what to do if i didn't get it fixed but FUKKEN SOLVED YESSSSSSSSSSS, intially all i could get was a single buzz holding the reset button, but then (out of fustration) i decided to hold it past the first vibrate, then 3 vibrates happened in a row, next thing i know flashmode and fastboot mode working :laugh: :laugh: :laugh: :laugh: :good: :good: :good: :good: :victory: :victory: :victory:
Click to expand...
Click to collapse
Read my reply
ATRIXXIRTA said:
Read my reply
Click to expand...
Click to collapse
haha yeah i had to hold my down for a bit longer idk why, and it vibrated 3 times, then i got it back into fastboot/flashmode and fixed it from there, but thanks anyway
DracoManX69 said:
haha yeah i had to hold my down for a bit longer idk why, and it vibrated 3 times, then i got it back into fastboot/flashmode and fixed it from there, but thanks anyway
Click to expand...
Click to collapse
All ZL's are like that. Hold down till 1 vibration for reboot. Hold down till 3 vibrations for power off. The yellow reset button will not power on the device however. I figured I'd check just incase my power button decided to go for a sh*t.
Sent from my C6503 using Tapatalk
Hello everyone. This is my first post here but I have been lingering around XDA particularly in Xperia S android development forum.
Today, I'm having a problem with my XS that it won't start up after i've done a few things related to installing new ROM in it. I'm not sure if it's bricked or anything but here's the full story and please tell me after reading:
My phone is as follows:
Xperia S
Unlocked Bootloader
Rooted
1) I was in my Recovery Mode (not TWRP as I was using a 4.1.2 JB ROM before) with a ROM installed.
2) Wiped Cache
3) Install ROM from SD Card
4) Successfully went through the ROM install wizard and installed it perfectly. I could've just used the ROM as usual but suddenly..
5) Then I went into Settings, I decided to do a Factory Reset (With wiping the internal storage too) <--- I thought doing this would only reset the current recently installed ROM and not wipe the ROM itself)
6) It reboots and bring me to the Recovery Mode page
7) I chose reboot my phone now option
8) It rebooted with the SONY logo on for a while
9) And then the triangle settings logo with a spanner and screwdriver logo show up. The screen stayed for a while like 20 seconds
10) And then it goes black..... and I can't get it start ever again (yet)
I don't know what on earth was I thinking doing a factory reset... that was dumb of me
That's how the story went... what should I do?
I've tried:
Holding the power button for 20 seconds(or longer), no vibrations, led or anything
Holding the vol up button for 20 seconds(or longer), no vibrations, led or anything
Holding both power+vol up button for 20 seconds(or longer), no vibrations, led or anything
Connecting the phone to laptop using USB to see if it is detected by my laptop but no nothing happened though (I did not press any button while connected)
Enter FLASHMODE using the proper way (using flashtool and everything) but fruitless
Charging so that the Red LED comes out when phone runs out battery and resetted. But so far still nothing (6 hours+ charging)
So at this point what has happened to my phone? Is this considered 'bricked'? Is it over for my phone now? Can I do anything to get it back running? Please help.
Thank you so much in advance for reading and helping me out.
Case: [UNSOLVED]
bump
DualElites said:
bump
Click to expand...
Click to collapse
anyone can help me out here? :crying:
DualElites said:
anyone can help me out here? :crying:
Click to expand...
Click to collapse
Have you tried to enter in FASTBOOT mode and flash a new recovery?
DualElites said:
Hello everyone. This is my first post here but I have been lingering around XDA particularly in Xperia S android development forum.
Today, I'm having a problem with my XS that it won't start up after i've done a few things related to installing new ROM in it. I'm not sure if it's bricked or anything but here's the full story and please tell me after reading:
My phone is as follows:
Xperia S
Unlocked Bootloader
Rooted
1) I was in my Recovery Mode (not TWRP as I was using a 4.1.2 JB ROM before) with a ROM installed.
2) Wiped Cache
3) Install ROM from SD Card
4) Successfully went through the ROM install wizard and installed it perfectly. I could've just used the ROM as usual but suddenly..
5) Then I went into Settings, I decided to do a Factory Reset (With wiping the internal storage too) <--- I thought doing this would only reset the current recently installed ROM and not wipe the ROM itself)
6) It reboots and bring me to the Recovery Mode page
7) I chose reboot my phone now option
8) It rebooted with the SONY logo on for a while
9) And then the triangle settings logo with a spanner and screwdriver logo show up. The screen stayed for a while like 20 seconds
10) And then it goes black..... and I can't get it start ever again (yet)
I don't know what on earth was I thinking doing a factory reset... that was dumb of me
That's how the story went... what should I do?
I've tried:
Holding the power button for 20 seconds(or longer), no vibrations, led or anything
Holding the vol up button for 20 seconds(or longer), no vibrations, led or anything
Holding both power+vol up button for 20 seconds(or longer), no vibrations, led or anything
Connecting the phone to laptop using USB to see if it is detected by my laptop but no nothing happened though (I did not press any button while connected)
Enter FLASHMODE using the proper way (using flashtool and everything) but fruitless
Charging so that the Red LED comes out when phone runs out battery and resetted. But so far still nothing (6 hours+ charging)
So at this point what has happened to my phone? Is this considered 'bricked'? Is it over for my phone now? Can I do anything to get it back running? Please help.
Thank you so much in advance for reading and helping me out.
Case: [UNSOLVED]
Click to expand...
Click to collapse
chill dude, dont panic, this was happened with me too a month ago, here what i did, i downlaod the .96 ftf file and flashed it in fastboot mode, in my situation, phone was on bootloop and your phone is turnning off so you can get into the fastboot easily,
have u tried sony update service? i broke my hp too... then i realised that i can actually use sony update service and press the volume down button and plug in my hp and update my fw to the original sony fw. hope this method helps for u.
Chill.
Alright dude, so chill. I recommend you to download Sony PC companion software and click on "Repair my device" from there. Then, you just have to follow the instructions and it should work. Tell me if it hasn't, I will help you
TheAkshay said:
Alright dude, so chill. I recommend you to download Sony PC companion software and click on "Repair my device" from there. Then, you just have to follow the instructions and it should work. Tell me if it hasn't, I will help you
Click to expand...
Click to collapse
Would this work with a unlocked bootloader and rooted SXS?? Having problems with my data partition because I think it's corrupted. But I can still use my phone if it doesn't shut down the normal way.
Xperia SLhard bricked afer wrong cwn recovery 6.0.4.4 insatlled
itsmarc19 said:
Would this work with a unlocked bootloader and rooted SXS?? Having problems with my data partition because I think it's corrupted. But I can still use my phone if it doesn't shut down the normal way.
Click to expand...
Click to collapse
I have the same issue with my Xperia SL.I wrongly install cwm recovery 6.0.4.4 by recover mode through option update.zip. Its done all the damage to my XSL. No Fastboot Mode, No Flash mode, No vibration nothing...Plz Help me guys...Plz
Yeah.
Yep. It should work.
So I got my brand new Z1C today and as you would do I rooted, backed up my TA and unlocked the bootloader. I also flashed on fastboot DooMLoRD kernel to get cwm.
I saw a new stock update for for 4.4.4 so I decided to try update via Sony PC Companion. Update downloaded but I was prompted that I could continue due to 'modified software'. So I decided to restore my TA to bring it back to stock and phone doesn' turn on
When I press the power button it vibrates but there is no display. If I wait a few seconds and press the power button it does the same. I can also still boot into fastboot mode. I attempted to flash a .ftf but I can't seem to get it into flashmode :crying:
Would anyone be able to help please?
Ha, that happened to me as well when I tried to restore the dreaded TA. But if fastboot is working, flashmode should too. Turn off the phone, press volume down and plugin usb. Iirc there's no LED confirmation in flashmode, but you'll see it in flashtool.
Iruwen said:
Ha, that happened to me as well when I tried to restore the dreaded TA. But if fastboot is working, flashmode should too. Turn off the phone, press volume down and plugin usb. Iirc there's no LED confirmation in flashmode, but you'll see it in flashtool.
Click to expand...
Click to collapse
Flashmode managed to work! Phone seems operational now.
Deary me that was a bit worrying. Is it quite normal for you to have to flash a .ftf after restoring the TA or something? Nearly crapped myself...
Iruwen said:
Ha, that happened to me as well when I tried to restore the dreaded TA. But if fastboot is working, flashmode should too. Turn off the phone, press volume down and plugin usb. Iirc there's no LED confirmation in flashmode, but you'll see it in flashtool.
Click to expand...
Click to collapse
There is an LED confirmation for flashmode, a shortly powered green LED. Fastboot is indicated by a solid blue LED.
cola286 said:
So I got my brand new Z1C today and as you would do I rooted, backed up my TA and unlocked the bootloader. I also flashed on fastboot DooMLoRD kernel to get cwm.
I saw a new stock update for for 4.4.4 so I decided to try update via Sony PC Companion. Update downloaded but I was prompted that I could continue due to 'modified software'. So I decided to restore my TA to bring it back to stock and phone doesn' turn on
When I press the power button it vibrates but there is no display. If I wait a few seconds and press the power button it does the same. I can also still boot into fastboot mode. I attempted to flash a .ftf but I can't seem to get it into flashmode :crying:
Would anyone be able to help please?
Click to expand...
Click to collapse
You've done correctly, but you've missed one step, before flashing your locked TA and rebooting you have to flash a stock kernel, otherwise the "modified software" test in the locked bootloader will be triggered (by the unsigned kernel).
You have not bricked your phone, this thread is incorrectly titled as I'm sure you knew when you posted it.