Hi all
i have tried everything to try rooting my note 2.
I got to the point that Su appears in my apps list but it stops responding and the little grey shield comes up to say unauthorised access was stopped. Also trying to update
i then tried Cwm and twrp and it has a green pass on doing but it does not give me a new download menu so that I can install multi tools from zip.
What else can I do to root and/or bypass know? I have hard reset my phone (btw su is still on) and busy downloading a stock 4.3 rom.
must I install stock rom and try again? Or what else can I try?
see details below of my details
Youre wrong here.. you should post at the 7105 forum..
Cradlebmw said:
Youre wrong here.. you should post at the 7105 forum..
Click to expand...
Click to collapse
Can you link it for me? Cant seem to find it
Related
i rooted my device but some games wont play like need for speed and asphalt 7 so i installd and its the last thing i did on my device (chainfire3d) then my device reboot and keep reboot wont open help please wait for answer
Sounds like this is a very similar problem to something someone else posted in the last few days. Take a look through the last couple of days posts in this forum and see if you can see it. The general suggestion if i remember right was to use ODIN to fix.
wisewood said:
Sounds like this is a very similar problem to something someone else posted in the last few days. Take a look through the last couple of days posts in this forum and see if you can see it. The general suggestion if i remember right was to use ODIN to fix.
Click to expand...
Click to collapse
can u show me the link i still searching for now and the only solution i found is change my stock ROM and i wont do that wanna get my official updates i think that's better
wanna know what to do by Odin to fix my device and in the same time keep my official system
i seen other problem got the same name but i mean my device wont open just galaxy note ii welcome screen and keep it my device wooont open any one help please what to do by odin ??????
no one answer developers forums xD
thanks will leave google helps more
Read before you install, chain fire 3d does not work with jellybean 4.1.
I think the description in the play store also said enough
Amazes me why people dont read ?
It clrearly says not for jelly bean
You need to find your desired stock rom and flash it via odin. Only solution
Why do you install things which aren't supported?
It's the first thing people should do when installing unconfirmed stuff.
Chainfire 3D isn't supported for JB.
What you need to do now is go into DOWNLOAD mode, and flash your stock ROM via Odin, if you want official.
thanks all its my mistake am new , and i said sorry for my note lmao , well now i need to search for good custom room
i download nandroid and platinum backup and i backup my apps&system wz data got .gz files i think on my sd-card and got nandroid backup on my sd-card (nandroid back up like 4 files) one of them .md5 and its 1kb others .tar 500mb and 700mb cach and system and est i think didnt remember they are on my sd-card is that help me by odin ? because i cant open my device any way my only solution by odin mode but is there any file in my back up files can help ? forget i tried to restore my device by nandroid.md5 and odin closed not response , dont say iam lucky new in android world understand nothing for now
You don't need to flash custom ROM, bro. If you want official rom, just go to sammobile.com, find the firmware of your country and flash it through odin. There, you have official stock ROM again.
Also your English is extremely hard to understand. Try to use commas and full-stops.
Hi, I recently got ATT note 2. I tried to root it and did the CF root from chainware and also tried galaxynote2root.com root. both didnt work, well it gave me root but I cant install a recoveery. I flashed it multiple times like 10 I think because my binary coutner says 10. idk what to do.Can someone help. plz post links if i need to download something. I do have all the drivers and stuff. its just that no recovery. im running 4.1.2 jelly bean
Not in any way am I trying to be rude or condescending. ...but
You need to stop and read the steps again. ...before you accidentally do damage to the device partitions or worse. ..
Custom recovery images are pushed to the device via Odin when the stock recovery still exists. ...and if done incorrectly. ..you can brick the device.
Please explain the method you are using to attempt the recovery flash. .and we can help correct the problem.
But by all means. ..don't attempt another flash of recovery until the problem is found.
Recovery is essential to do exactly as the term states. ..."recovery"...and without it. ..you will be in trouble with no way back but JTAG service.
Read and read again the recovery steps. ..and go slow here...
Your on the edge at the moment....g
gregsarg said:
Not in any way am I trying to be rude or condescending. ...but
You need to stop and read the steps again. ...before you accidentally do damage to the device partitions or worse. ..
Custom recovery images are pushed to the device via Odin when the stock recovery still exists. ...and if done incorrectly. ..you can brick the device.
Please explain the method you are using to attempt the recovery flash. .and we can help correct the problem.
But by all means. ..don't attempt another flash of recovery until the problem is found.
Recovery is essential to do exactly as the term states. ..."recovery"...and without it. ..you will be in trouble with no way back but JTAG service.
Read and read again the recovery steps. ..and go slow here...
Your on the edge at the moment....g
Click to expand...
Click to collapse
well first i downloaded the galaxynote2root zip file from the website. it gave the odin and a file to flash. then I put phone in download mode and flashed. successfully got root. I think its because I have the latest software. 4.1.2 everyone got root in 4.1.1 and the old one doesnt work anymore. what did u use to root.? I did all the steps exactly what max did. and he got root like that and installed cwm. i followed video and blog post. this is the video : http://www.youtube.com/watch?v=NFHZ535L7is
Is it better to use the toolkit that to use this method? toolkit users have had less problems.
ALSO NOW ITS DOWNLOADING SOME UPDATES WHEN I CONNECT TO WIFI. im already rooted so does that mean im going to brick if i update so im not even using the phone now plzz someone help me
thanks for reply
FIRST thing you need ro do is check and make sure you have a recovery.
Imo the number one reason noobs break there phones is with out realizing it they borked their recovery and try to root , flash a custom rom, OR take an ota.
No recovery = no ota or any other flashing.
Check you recovery by:
Power off> press vol up, menu, and home.
This is done all at once. As soon as you see the text appear in the top right corrner release. It takes a bit of practice but its not a biggie.
Now.. do you see recovery or are you in a boot loop?
If you have a boot loop while trying to get into recovery...it means u no have recovery!!!
Secondly Stop flashing root!!
Lol pick a single root method that has been verified to work by others. And stick to it.
Its sooo important to read.
In fact with some phones one variant of root wont work if you have an update and hence a different android version.
So you need to read.
If you have recovery click factory restore.
You can do this from the os or.. I prefer going into recovery and hitting factory restore. iTS THE SAME.
If you have a boot loop while trying to get into recoveru
Click my signature in web view.
Go do the kies efr thing as I explain it my tut. Get your phone back to a nice clean start.
Kies efr IS THE FASTEST AND SAFEST way for newbs to get back to stock.
Newbs should NOT be using odin unless they are 100% sure they know what they are doing and are comfortable doing so. My efr tutorial in my sig will teach you how to use KIES EFR (Emergency Firmware Recovery)
I prefer to send people the gn2 toolkit.
Its easy and also has plenty of options.
Just remember to uninstall kies first.
There are numerous ways to root.
Pick one. Lol.
sent from my T.A.R.T.I.S
(Time And Relative Tarts In Space)
Freakboy hit it on the head...
I won't try to add more into the responses, as this will just confuse the issue more...
Follow his lead, and his advice.....g
ok thanks a lot, i flashed twrp recovery now running jellybam rom, i was wondering if it supports transparent status bar? not just in one app in all of them.
The answer to that question is found in the respective thread for the rom you are using. .
Check there first. ...
General searches also yield great results. ...g
im going to switch to pac man rom soon, bc xda banned jellybam for not giving credits i think. anyway whats a good kernel to use? now im using the one that came with jellybam. im guessing u experminented a lot and give me some suggestions. i dont wanna overclock just looking for smooth performance.
For pac.....
Use the preloaded kernel ..
It is optimized for the build and you can get support ...
If you change kernels ...you may not get support ...g
Hi all
i have tried everything to try rooting my note 2.
I got to the point that Su appears in my apps list but it stops responding and the little grey shield comes up to say unauthorised access was stopped. Also trying to update*
i then tried Cwm and twrp and it has a green pass on doing but it does not give me a new download menu so that I can install multi tools from zip.*
What else can I do to root and/or bypass know? I have hard reset my phone (btw su is still on) and busy downloading a stock 4.3 rom.
must I install stock rom and try again? Or what else can I try?
see details below of my details
http://forum.xda-developers.com/showthread.php?t=2339704
have tried these threads but it all seems to refer to pre 4.3
can I download pre rooted 4.3 firmware from somewhere else?
SIlvRav said:
Hi all
i have tried everything to try rooting my note 2.
I got to the point that Su appears in my apps list but it stops responding and the little grey shield comes up to say unauthorised access was stopped. Also trying to update*
i then tried Cwm and twrp and it has a green pass on doing but it does not give me a new download menu so that I can install multi tools from zip.*
What else can I do to root and/or bypass know? I have hard reset my phone (btw su is still on) and busy downloading a stock 4.3 rom.
must I install stock rom and try again? Or what else can I try?
see details below of my details
Click to expand...
Click to collapse
Option 1: Following process should work for your N7105 phone.
http://forum.xda-developers.com/showthread.php?t=2535015
u have already tried this as exactly told, then you go to option 2
Option 2: Follow Dr. Ketans thread.
http://forum.xda-developers.com/showthread.php?t=2032849
If none of above work, Lastly install stock rom.
Sent from my GT-N7100 using Tapatalk
I have been searching the forum and google and have been unable to reach a solution yet.
I am not a noob, but i am not an expert either so use small words ha.
I have a Samsung Galaxy Tab 3 10.1 5210 with the most recent OTA update.
Last night I attempted to root my device using this:
androidxda (DOT) com/root-samsung-galaxy-tab-3-10-1-gt-p5210
It claimed successful and my device started to reboot and hung up at the Samsung GALAXY TAB 3 screen. I am unable to get to recovery mode on the device. Only able to go to download mode. I have tried several options but have been unable to find a way to flash it successfully. The flashes i have tried downloading were all in .zip and that obviously isn't able to be used in Odin. I have researched how to convert the files into a .tar but I don't have linux. Can someone please help me because I need my tablet. I know it can be saved but I can't seem to locate the answers. I am also getting concerned that it is unable to charge the battery being in the condition it is in now so I am trying to conserve the battery on the tablet until it is absolutely needed. Thanks.
cameron72 said:
I have been searching the forum and google and have been unable to reach a solution yet.
I am not a noob, but i am not an expert either so use small words ha.
I have a Samsung Galaxy Tab 3 10.1 5210 with the most recent OTA update.
Last night I attempted to root my device using this:
androidxda (DOT) com/root-samsung-galaxy-tab-3-10-1-gt-p5210
It claimed successful and my device started to reboot and hung up at the Samsung GALAXY TAB 3 screen. I am unable to get to recovery mode on the device. Only able to go to download mode. I have tried several options but have been unable to find a way to flash it successfully. The flashes i have tried downloading were all in .zip and that obviously isn't able to be used in Odin. I have researched how to convert the files into a .tar but I don't have linux. Can someone please help me because I need my tablet. I know it can be saved but I can't seem to locate the answers. I am also getting concerned that it is unable to charge the battery being in the condition it is in now so I am trying to conserve the battery on the tablet until it is absolutely needed. Thanks.
Click to expand...
Click to collapse
First of all - Welcome to xda
Your tab is soft bricked, something has gone wrong with your system files... Honestly it seems like you know enough to get it done, but are struggling a bit with the file formats. You are correct in saying that Odin won't use zip files, but you shouldn't have to convert anything to tar or download linux! If you extract the zip files, you should find a .tar or .tar.md5 file (inside the zip file) that Odin can use, put it in the PDA mode box, etc etc... If your downloads don't have the correct files inside them, try THIS thread.
Let me know if you get it sorted :good:
bob23bk said:
First of all - Welcome to xda
Your tab is soft bricked, something has gone wrong with your system files... Honestly it seems like you know enough to get it done, but are struggling a bit with the file formats. You are correct in saying that Odin won't use zip files, but you shouldn't have to convert anything to tar or download linux! If you extract the zip files, you should find a .tar or .tar.md5 file (inside the zip file) that Odin can use, put it in the PDA mode box, etc etc... If your downloads don't have the correct files inside them, try THIS thread.
Let me know if you get it sorted :good:
Click to expand...
Click to collapse
I had already tried the method and file in the forum you linked me to. It failed almost instantly. That's when I turned everything off and tossed it all to the back seat of my work truck before it got thrown at the windshield. I keep seeing people saying they have trwp or whatever. I don't even know what that is haven't researched that. Is it something i need as well?
I've never successfully rooted a Samsung device. I used to do this stuff a lot back with the droid x with Linux and everything was pretty simple. Does Samsung change their bootloader with each update like Motorola did then? I was wondering that when trying to install a firmware of a previous version that maybe that was the problem.
All I wanted root for was to just tweak some things and be happy. It has turned into a nightmare.
C,
hi,
the consistent/common thread of this problem is/seems to be taking the ota and trying unverified/gimmicky
root methods.
there are recoveries for the gt-p52xx in the tab 10.1 forum
the majority of samsung devices root as follows;
if a custom recovery exist, flash it.
then download recent or latest version of chainfire's supersu update zip, reboot to recovery
backup your rom first, then flash supersu, if everything goes well, once you have set up your stock rom with root in place
make a new backup.
samsung ota's are death incarnate, reject them.
goto the tab 10 forum and get busy ! you said it yourself, you're not a noob, you know the drill. :good:
m
moonbutt74 said:
C,
hi,
the consistent/common thread of this problem is/seems to be taking the ota and trying unverified/gimmicky
root methods.
there are recoveries for the gt-p52xx in the tab 10.1 forum
the majority of samsung devices root as follows;
if a custom recovery exist, flash it.
then download recent or latest version of chainfire's supersu update zip, reboot to recovery
backup your rom first, then flash supersu, if everything goes well, once you have set up your stock rom with root in place
make a new backup.
samsung ota's are death incarnate, reject them.
goto the tab 10 forum and get busy ! you said it yourself, you're not a noob, you know the drill. :good:
m
Click to expand...
Click to collapse
I have tried the recoveries in the forum and it failed seconds after starting.
I don't do this stuff regularly as I don't hardly have the time. I haven't done anything of this nature in years so I'm well out of the loop on things..
cameron72 said:
I have tried the recoveries in the forum and it failed seconds after starting.
I don't do this stuff regularly as I don't hardly have the time. I haven't done anything of this nature in years so I'm well out of the loop on things..
Click to expand...
Click to collapse
okay, hmm, when you say it fails, do you mean odin fails to flash and if so what is the reason/ouput ?
or do you mean that you are now in a recovery bootloop ?
note- though i go the full route of packing recovery.img's for odin flashing, the md5 checksum always seems to
come up as invalid, the working "remedy" is to remove the .md5 extension from the "odin-flashable-recovery".tar.md5 file
by renaming the file to "odin-flashable-recovery".tar
odin will no longer attempt the checksum verification but the recovery file will flash.
make sure you have samsung-usb-drivers for windows installed. on the main page of my devhost archive [link is in my signature]
you will find the tools you need. the possible problem is that the ota you installed may have overwritten your bootloader, for that i don't
have a reliable fix, so if anything make sure you also have the stock recovery ready to go as well as supersu update zip
already downloaded onto your device for rooting.
after you flash the custom recovery [with auto-restart in odin disabled] run the flash and wait for the res-ok message, give it another second or two then disconnect the tab and force reboot to recovery, home,vol-up and power, once in recovery make a full backup, then flash supersu zip and reboot, if you do go into recovery loop, force reboot to odin mode, home,vol-down and power, follow the on screen instruction, now reconnect your tab to pc and use odin to flash back stock recovery.
m
Okay guys I appreciate the help. I finally got it. I tried the method on Zachisimo's post on unbricking and finally got it installed.
After it installed, it left me with a bootloop and I was actually able to go into recovery mode this time and do a factory data reset and wipe cache then everything went well. I am a happy dude now.
Going to attempt rooting it again and does anyone have any suggestions on what ROM to install? I have never used any custom ROM's before so that is a new area for me. Feeling more confident knowing how to save it from the dead. :good::good::good:
cameron72 said:
Okay guys I appreciate the help. I finally got it. I tried the method on Zachisimo's post on unbricking and finally got it installed.
After it installed, it left me with a bootloop and I was actually able to go into recovery mode this time and do a factory data reset and wipe cache then everything went well. I am a happy dude now.
Going to attempt rooting it again and does anyone have any suggestions on what ROM to install? I have never used any custom ROM's before so that is a new area for me. Feeling more confident knowing how to save it from the dead. :good::good::good:
Click to expand...
Click to collapse
Hi,
Alright !'m glad you got it working, as to roms , all available roms currently are stock modifications , I use cag-rom, there's also pimp-droid
both kitkat.
m
moonbutt74 said:
Hi,
Alright !'m glad you got it working, as to roms , all available roms currently are stock modifications , I use cag-rom, there's also pimp-droid
both kitkat.
m
Click to expand...
Click to collapse
If you use it then thats what i shall try. First i gotta find a root, then I have seen many people recommend philz recovery, and then the rom?
question why does Restl3ss say wait 10minutes after installing a rom before doing anything?
cameron72 said:
If you use it then thats what i shall try. First i gotta find a root, then I have seen many people recommend philz recovery, and then the rom?
question why does Restl3ss say wait 10minutes after installing a rom before doing anything?
Click to expand...
Click to collapse
for root look up supersu update zip
ask Restl3ss :silly:
m
cameron72 said:
Okay guys I appreciate the help. I finally got it. I tried the method on Zachisimo's post on unbricking and finally got it installed.
After it installed, it left me with a bootloop and I was actually able to go into recovery mode this time and do a factory data reset and wipe cache then everything went well. I am a happy dude now.
Going to attempt rooting it again and does anyone have any suggestions on what ROM to install? I have never used any custom ROM's before so that is a new area for me. Feeling more confident knowing how to save it from the dead. :good::good::good:
Click to expand...
Click to collapse
Glad it worked out, recovering from brick does set you free from the stress induced by the disclaimers imo :silly:
All the files on the stickies are now unavailable.. Someone help?
boredmug said:
All the files on the stickies are now unavailable.. Someone help?
Click to expand...
Click to collapse
I bought this thing used and it has the latest software. 8.5.1.. I've tried several root methods and had problems.. when it tries to push superuser it says device is out of space. At this point the whole tablet is super slow. I'm able to get into fastboot with adb commands but since i can't download any of the files to install custom recovery im kinda dead in the water..
I know i cant believe goo im is gone hopefully somebody else takes it over so all the files are available again.
You could try sending a pm to hashcode